-
Trailer Parts Promotion
Original equipment manufacturers names and part numbers are quoted for reference purposes only and are not intended to infer that our replacementparts are used as original equipment.
Special LOW prices on Trailer parts and accessories!
Part No. Capacity MaxHeightMin
HeightTube Sec-
tion RRPSpecial Net
Price
VLA2027 2000kg 750mm 375mm 60x60mm
VLA2022 3000kg 810mm 460mm 50x50mm
VLA2026 3000kg 574mm N/A N/A
VLA2023 5000kg 850mm 500mm 60x60mm
VLA2024 7500kg 850mm 500mm 80x80mm
Drawbar Jacks
VLA2027
Jockey wheel mounting bracketsCast clamp bracket for 48mm diameter ribbed tubes.Can be used with VPN4406 & VPN4410 jockey wheelassemblies.
Part No. VPN4422
Cast clamp bracket for 48mm diameter smooth tubes.Can be used with VPN4411 jockey wheel assembly.
Part No. VPN4426
Cast clamp bracket for 42mm diameter smooth tubes.Can be used with VPN4412 jockey wheel assembly.
Part No. VPN4425
Cast clamp bracket for 35mm diameter smooth tubes.Can be used with VPN4413 jockey wheel assemblies.
Part No. VPN4428
A pressed steel bracket which accepts a 50mm shaft.Suitable for VLA2020.
Part No. VLA2021
Jockey wheel assemblies
Part No. Assemblyshaft WheelOverall length
closed
Overalllengthopen
RRP Special Net Price
VPN4413 35mm Øsmooth tube52mm wide
200mm outer Ø 810mm 1020mm
VPN4412 42mm Øsmooth tube52mm wide
200mm outer Ø 730mm 950mm
VPN4411 48mm Øsmooth tube52mm wide
200mm outer Ø 730mm 950mm
VPN4406 48mm Øribbed tube52mm wide
200mm outer Ø 850mm 1090mm
VPN4410 48mm Øribbed tube52mm wide
200mm outer Ø 960mm 1190mm
VLA2020 50mm Øsmooth tube52mm wide
200mm outer Ø 540mm 760mm
VPN4
412
VPN4
406
VLA2
020
Drawbar lockLock insert for Knott and Avonridecoupling units. Supplied with twokeys. Suitable for KF13 and KF13E,KFG27, KFG35, KF20, KFG20, andKRV20 couplings. Replaces stand-ard fitment hitch lock. Overall length57mm, thread diameter 18mm.
Part No. VPN4416
Order now on:
RRP
RRP
RRP
RRP
RRP
RRP
-
VLE2115
Part No. VPN4404 Ring
Breakaway cablesIt is a requirement that braked trailers are fitted with a breakaway cable. This cable will applythe hand brake if for any reason the trailer becomes detached during towing. This cable shouldbe regularly inspected and replaced if any defects are visible
Part No. VPN4403 ClevisVPN4404 VPN4403
Part No. Diameter Length RRP Special NetPrice
VLE2031 15mm 108mmVLE2012 19mm 99mmVLE2013 19mm 137mmVLE2015 19mm 158mmVLE2014 22mm 137mmVLE2016 22mm 158mmVLE2017 25.4mm 137mmVLE2018 25.4mm 157mmVLE2011 28mm 183mmVLE2019 32mm 183mmVLE2032 35mm 185mmVLE2033 38mm 185mm
Towing pins
Towing Ball• 50mm diameter• Bolt hole size: 5/8”• Capacity: 1500kg
Part No. VLE2110
Towing jaw assemblies50mm diameter Manual fixing. 16mmfixing holes
Part No. VLE2113 - 1.500kg load
VLE2113Part No. VLE2115 - 3.000kg load
Part No. Type Rodlength RRPSpecial Net
Price
VPN4407 Knott KFG27 212mm
VPN4400 Knott KFG35 222mm
VPN4409 Knott KF13 andKF13E 215mm
VPN4401 Bradley HU3HE 155mm
VPN4402 Bradley HU3HE 195mm
VPN4408 Bradley HU12 200mm
Hole di-ameter
12mm
14mm
12mm
12mm
12mm (inbush)
14mm
Overalllength
547mm
605mm
545mm
397mm
520mm
565mm
Cylinder end Cylinderdiameter10mm male
thread rod end 28mm
10mm malethread rod end 28mm
10mm malethread rod end 28mm
8mm malethread rod end 24mm
12mm diameterhole in bush 25mm
14mm diameter hole 28mm
Drawbar dampers
Part No. Type Size RRP Special NetPriceVPN4423 Hitch bellow For Knott KFG27 type couplingVPN4424 Hitch bellow For Knott KFG35 type couplingVPN4427 Hitch bellow For Al-Ko 251 type coupling
Hitch bellows
Great prices on trailer coupling and braking components
Part No. Diameter Length RRP Special NetPrice
VLE2040 31mm 230mmVLE2041 31mm 250mmVLE2042 31mm 360mmVLE2043 31mm 500mmVLE2044 31mm 670mm
Towing pins with locking handle
RRP
RRP
RRP
RRPRRP
-
• Knott type• 250mm x 40mm (10”) diameterContains 2 fixed and 2 slidingbrake shoes, auto-reverse slidingshoe carrier and all springs re-quired.
• Knott type• 250mm x 40mm (10”) diameterContains 2 fixed and 2 slidingbrake shoes, auto-reverse slid-ing shoe carrier and all springsrequired.
Part No. VPN4307*Part No. VPN4330*Part No. VPN4331*
• Al-Ko type• 200mm x 50mm (8”) diameter• Contains 4 brake shoes andall springs required
Part No. VPN4332*
• Knott type• 200mm x 50mm (8”) diameter• Contains 2 fixed and 2 slidingbrake shoes, auto-reverse slid-ing shoe carrier and all springsrequired.
Brake shoe Kits
Part No. Tubularend fitting TypeOuterlength RRP
VPN4309 26mm Al-Ko 890mmVPN4310 22mm Knott 1130mmVPN4311 22mm Knott 1430mmVPN4312 22mm Knott 1630mmVPN4313 22mm Knott 1790mm
Innerlength1100mm1340mm1640mm1840mm2000mm
Special NetPrice
VPN4314 22mm Knott 770mm 980mmVPN4315 22mm Knott 1990mm 2200mmVPN4316 22mm Knott 2130mm 2340mmVPN4317 22mm Knott 2340mm 2560mmVPN4318 22mm Knott 2750mm 2960mmVPN4319 22mm Knott 630mm 840mmVPN4320 26mm Al-Ko 770mm 980mmVPN4321 26mm Al-Ko 1140mm 1340mmVPN4322 26mm Al-Ko 1620mm 1830mmVPN4323 26mm Al-Ko 1430mm 1640mm
Brake cables
• Replacement shoe kit for ADRtype axle with 300mm x 90mmbrake drum• Kit includes springs and pivotbolt. For use on non type approvedtrailers manufactured up to 19October 2012
• Replacement shoe kit for ADRtype axle with 350mm x 90mmbrake drum• Kit includes springs and pivotbolt. For use on non type ap-proved trailers manufactured upto 19 October 2012
Part No. VPN4351Part No. VPN4354Part No. VPN4350
• Knott type• 203mm x 40mm diameter• Contains 2 fixed and 2 slidingbrake shoes.• Auto-reverse sliding shoecarrier and all springs required
Part No. VPN4333*
• Replacement shoe kit for ADRtype axle with 300mm x 60mmbrake drum• Kit includes springs and pivotbolt. For use on non type ap-proved trailers manufactured upto 19 October 2012
Part No. VPN4325 - Knott type200mm x 50mm & 250mm x40mm. Ifor Williams trail-ers would be fitted with 76mm grey or 75mm blackplastic knock in hub caps
Half shell cable supportHalf shell to support cable entry to brake backplate
Part No. VPN4306 - Al-Ko typeIfor Williams trailers would be fitted with 73mm blackplastic knock in hub caps
VPN4325 VPN4306
TYPEAPPROVED
TYPEAPPROVED
TYPEAPPROVED
TYPEAPPROVED
*SUITABLE FOR IFOR
WILLIAMS TRAILERS
RRPRRP
RRPRRP
RRPRRP RRPRRP RRPRRP RRPRRP
RRPRRP RRPRRP RRPRRP RRPRRP
-
Wheel hub retaining nuts45mm head, stake nut with flange. Commonly found on IforWilliams trailers manufactured after 1994. It is recommended toreplace stake nuts after each removal. Pack of 2.
Part no. VPN4015
Wheel hub retaining nutsFitted on Ifor Williams trailers produced before September 1992(split pin not included). Pack of 10.
Part No. VLG3307
Part No. Axle type Length Width Application RRP Special NetPriceVLD1828 Single 760mm 220mm Suitable for 13” and 16” wheelsVLD1825 Tandem 1425mm 200mm Suitable for Ifor Williams TA, BV and GD trailersVLD1826 Tandem 1550mm 200mm Suitable for Ifor Williams GD, BV and TT trailersVLD1827 Tandem 1750mm 200mm Suitable for Ifor Williams TA, BV and HB trailers
VLD1827
Part No. Suspensiontype ThreadLength ofbolt legs
Length betweenlegs RRP
Special NetPrice
VPN4101 Single leaf M12 120mm 50mmVPN4102 Twin leaf M12 130mm 50mmVPN4103 Seven leaf ½” UNF 150mm 50mmVPN4104 Five leaf ½” UNF 125mm 50mm VPN4104
Single and tandem mudguards
U bolts
Leaf springsTwin leaf parabolic road spring. Fittedto some Ifor Williams trailers manufacturedafter 1994. Length following curve of spring 800mm.Width 50mm. 12mm diameter hole in spring bush.Fit with VLG1928 bolt and VLG4237
Part No. VPN4100 - Twin
Part No. VPN4105 - Single
Leaf springs bushSingle and twin leaf spring eyebush. Used in VPN4100 andVPN4105 leaf springs
Part No. VPN4106
Hex coarse bolt & nutSpecific M12 x 80mm Grade 10.9mechanically plated bolt. Fitsthrough VPN4106 bush when fittingVPN4100 and VPN4105 leafsprings. Lock nut to suit VLG4237
Part No. VLG1928
Wheel bearing kitTypically fitted to Ifor Williams trailers produced before Septem-ber 1992. Kit includes two taper roller bearings 18590/18520(VLD3843) and an oil seal 43mm x 75mm x 10mm.
Part no. VPN3075 - 43x75x10mm
Part No. VPN3076 - 55x75x10mm
Wheel bearing kitTypically fitted to Ifor Williams trailers produced after January1994. Kit includes wheel bearing, bearing retaining circlip andstake nut (VPN4015). Stake nut should be tightened to 350Nm.
Part no. VPN4014
Wheel bearingTaper roller bearing L44610 marked on cup. 44600LA markedon cone. Cone has incorporated seal. Outside diameter ofbearing 50mm. Outside diameter including seal 52mm. Insidediameter 25mm. Overall width 16mm.
Part No. VPN4005
LOWPRICES For more information on
trailer parts and accessoriesplease visit
www.vapormatic.co.uk
Or get a copy of our Trailer PartsCatalogue (PAA5018)
RRPRRP
RRPRRP
RRPRRP
RRPRRP
RRPRRP
RRPRRP
RRPRRP
RRPRRP
RRPRRP
RRPRRP
Original equipment manufacturers names and part numbers are quoted for reference purposes only and are not intended to infer thatour replacement parts are used as original equipment.
Button11: e33: e2: e1: e3: e4: e5: e6: e7: e8: e9: e10: e11: e12: e13: e14: e15: e16: e17: e18: e19: e20: e21: e22: e23: e24: e25: e26: e27: e28: e29: e30: e31: e32: e34: e35: e36: e37: e38: e39: e40: e41: e42: e43: e44: e45: e46: e47: e48: e49: e50: e51: e52: e53: e54: e55: e56: e57: e58: e59: e60: e61: e62: e63: e64: e65: e66: e67: e68: e69: e70: e71: e72: e73: e74: e75: e76: e77: e78: e79: e80: e81: e82: e83: e84: e85: e86: e87: e88: e89: e90: e91: e92: e93: e94: e95: e96: e97: e98: e99: e100: e101: e102: e103: e104: e105: e106: e107: e108: e109: £58.90e110: e111: e112: e113: e114: e115: e116: e117: e118: e119: e120: e121: e122: e123: e124: e125: e126: e127: e128: e129: e130: e131: e132: e133: e134: e135: e136: e137: e138: e139: e140: e141: e142: e143: e144: e145: e146: e147: e148: e149: e150: e151: e152: e153: e154: e155: e156: e157: e158: e159: e160: e161: e162: e163: e164: e165: e166: e167: e168: e169: e170: e171: e172: e173: e174: e175: e176: e177: e178: e179: e180: e181: e182: Text9b: Company address: Your contact details: Insert Telephone/Fax/email/web