Trailer Parts Promotion

Original equipment manufacturers names and part numbers are quoted for reference purposes only and are not intended to infer that our replacementparts are used as original equipment.

Special LOW prices on Trailer parts and accessories!

Part No. Capacity MaxHeightMin

HeightTube Sec-

tion RRPSpecial Net

Price

VLA2027 2000kg 750mm 375mm 60x60mm

VLA2022 3000kg 810mm 460mm 50x50mm

VLA2026 3000kg 574mm N/A N/A

VLA2023 5000kg 850mm 500mm 60x60mm

VLA2024 7500kg 850mm 500mm 80x80mm

Drawbar Jacks

VLA2027

Jockey wheel mounting bracketsCast clamp bracket for 48mm diameter ribbed tubes.Can be used with VPN4406 & VPN4410 jockey wheelassemblies.

Part No. VPN4422

Cast clamp bracket for 48mm diameter smooth tubes.Can be used with VPN4411 jockey wheel assembly.

Part No. VPN4426

Cast clamp bracket for 42mm diameter smooth tubes.Can be used with VPN4412 jockey wheel assembly.

Part No. VPN4425

Cast clamp bracket for 35mm diameter smooth tubes.Can be used with VPN4413 jockey wheel assemblies.

Part No. VPN4428

A pressed steel bracket which accepts a 50mm shaft.Suitable for VLA2020.

Part No. VLA2021

Jockey wheel assemblies

Part No. Assemblyshaft WheelOverall length

closed

Overalllengthopen

RRP Special Net Price

VPN4413 35mm Øsmooth tube52mm wide

200mm outer Ø 810mm 1020mm

VPN4412 42mm Øsmooth tube52mm wide

200mm outer Ø 730mm 950mm

VPN4411 48mm Øsmooth tube52mm wide

200mm outer Ø 730mm 950mm

VPN4406 48mm Øribbed tube52mm wide

200mm outer Ø 850mm 1090mm

VPN4410 48mm Øribbed tube52mm wide

200mm outer Ø 960mm 1190mm

VLA2020 50mm Øsmooth tube52mm wide

200mm outer Ø 540mm 760mm

VPN4

412

VPN4

406

VLA2

020

Drawbar lockLock insert for Knott and Avonridecoupling units. Supplied with twokeys. Suitable for KF13 and KF13E,KFG27, KFG35, KF20, KFG20, andKRV20 couplings. Replaces stand-ard fitment hitch lock. Overall length57mm, thread diameter 18mm.

Part No. VPN4416

Order now on:

RRP

RRP

RRP

RRP

RRP

RRP

VLE2115

Part No. VPN4404 Ring

Breakaway cablesIt is a requirement that braked trailers are fitted with a breakaway cable. This cable will applythe hand brake if for any reason the trailer becomes detached during towing. This cable shouldbe regularly inspected and replaced if any defects are visible

Part No. VPN4403 ClevisVPN4404 VPN4403

Part No. Diameter Length RRP Special NetPrice

VLE2031 15mm 108mmVLE2012 19mm 99mmVLE2013 19mm 137mmVLE2015 19mm 158mmVLE2014 22mm 137mmVLE2016 22mm 158mmVLE2017 25.4mm 137mmVLE2018 25.4mm 157mmVLE2011 28mm 183mmVLE2019 32mm 183mmVLE2032 35mm 185mmVLE2033 38mm 185mm

Towing pins

Towing Ball• 50mm diameter• Bolt hole size: 5/8”• Capacity: 1500kg

Part No. VLE2110

Towing jaw assemblies50mm diameter Manual fixing. 16mmfixing holes

Part No. VLE2113 - 1.500kg load

VLE2113Part No. VLE2115 - 3.000kg load

Part No. Type Rodlength RRPSpecial Net

Price

VPN4407 Knott KFG27 212mm

VPN4400 Knott KFG35 222mm

VPN4409 Knott KF13 andKF13E 215mm

VPN4401 Bradley HU3HE 155mm

VPN4402 Bradley HU3HE 195mm

VPN4408 Bradley HU12 200mm

Hole di-ameter

12mm

14mm

12mm

12mm

12mm (inbush)

14mm

Overalllength

547mm

605mm

545mm

397mm

520mm

565mm

Cylinder end Cylinderdiameter10mm male

thread rod end 28mm

10mm malethread rod end 28mm

10mm malethread rod end 28mm

8mm malethread rod end 24mm

12mm diameterhole in bush 25mm

14mm diameter hole 28mm

Drawbar dampers

Part No. Type Size RRP Special NetPriceVPN4423 Hitch bellow For Knott KFG27 type couplingVPN4424 Hitch bellow For Knott KFG35 type couplingVPN4427 Hitch bellow For Al-Ko 251 type coupling

Hitch bellows

Great prices on trailer coupling and braking components

Part No. Diameter Length RRP Special NetPrice

VLE2040 31mm 230mmVLE2041 31mm 250mmVLE2042 31mm 360mmVLE2043 31mm 500mmVLE2044 31mm 670mm

Towing pins with locking handle

RRP

RRP

RRP

RRPRRP

• Knott type• 250mm x 40mm (10”) diameterContains 2 fixed and 2 slidingbrake shoes, auto-reverse slidingshoe carrier and all springs re-quired.

• Knott type• 250mm x 40mm (10”) diameterContains 2 fixed and 2 slidingbrake shoes, auto-reverse slid-ing shoe carrier and all springsrequired.

Part No. VPN4307*Part No. VPN4330*Part No. VPN4331*

• Al-Ko type• 200mm x 50mm (8”) diameter• Contains 4 brake shoes andall springs required

Part No. VPN4332*

• Knott type• 200mm x 50mm (8”) diameter• Contains 2 fixed and 2 slidingbrake shoes, auto-reverse slid-ing shoe carrier and all springsrequired.

Brake shoe Kits

Part No. Tubularend fitting TypeOuterlength RRP

VPN4309 26mm Al-Ko 890mmVPN4310 22mm Knott 1130mmVPN4311 22mm Knott 1430mmVPN4312 22mm Knott 1630mmVPN4313 22mm Knott 1790mm

Innerlength1100mm1340mm1640mm1840mm2000mm

Special NetPrice

VPN4314 22mm Knott 770mm 980mmVPN4315 22mm Knott 1990mm 2200mmVPN4316 22mm Knott 2130mm 2340mmVPN4317 22mm Knott 2340mm 2560mmVPN4318 22mm Knott 2750mm 2960mmVPN4319 22mm Knott 630mm 840mmVPN4320 26mm Al-Ko 770mm 980mmVPN4321 26mm Al-Ko 1140mm 1340mmVPN4322 26mm Al-Ko 1620mm 1830mmVPN4323 26mm Al-Ko 1430mm 1640mm

Brake cables

• Replacement shoe kit for ADRtype axle with 300mm x 90mmbrake drum• Kit includes springs and pivotbolt. For use on non type approvedtrailers manufactured up to 19October 2012

• Replacement shoe kit for ADRtype axle with 350mm x 90mmbrake drum• Kit includes springs and pivotbolt. For use on non type ap-proved trailers manufactured upto 19 October 2012

Part No. VPN4351Part No. VPN4354Part No. VPN4350

• Knott type• 203mm x 40mm diameter• Contains 2 fixed and 2 slidingbrake shoes.• Auto-reverse sliding shoecarrier and all springs required

Part No. VPN4333*

• Replacement shoe kit for ADRtype axle with 300mm x 60mmbrake drum• Kit includes springs and pivotbolt. For use on non type ap-proved trailers manufactured upto 19 October 2012

Part No. VPN4325 - Knott type200mm x 50mm & 250mm x40mm. Ifor Williams trail-ers would be fitted with 76mm grey or 75mm blackplastic knock in hub caps

Half shell cable supportHalf shell to support cable entry to brake backplate

Part No. VPN4306 - Al-Ko typeIfor Williams trailers would be fitted with 73mm blackplastic knock in hub caps

VPN4325 VPN4306

TYPEAPPROVED

TYPEAPPROVED

TYPEAPPROVED

TYPEAPPROVED

*SUITABLE FOR IFOR

WILLIAMS TRAILERS

RRPRRP

RRPRRP

RRPRRP RRPRRP RRPRRP RRPRRP

RRPRRP RRPRRP RRPRRP RRPRRP

Wheel hub retaining nuts45mm head, stake nut with flange. Commonly found on IforWilliams trailers manufactured after 1994. It is recommended toreplace stake nuts after each removal. Pack of 2.

Part no. VPN4015

Wheel hub retaining nutsFitted on Ifor Williams trailers produced before September 1992(split pin not included). Pack of 10.

Part No. VLG3307

Part No. Axle type Length Width Application RRP Special NetPriceVLD1828 Single 760mm 220mm Suitable for 13” and 16” wheelsVLD1825 Tandem 1425mm 200mm Suitable for Ifor Williams TA, BV and GD trailersVLD1826 Tandem 1550mm 200mm Suitable for Ifor Williams GD, BV and TT trailersVLD1827 Tandem 1750mm 200mm Suitable for Ifor Williams TA, BV and HB trailers

VLD1827

Part No. Suspensiontype ThreadLength ofbolt legs

Length betweenlegs RRP

Special NetPrice

VPN4101 Single leaf M12 120mm 50mmVPN4102 Twin leaf M12 130mm 50mmVPN4103 Seven leaf ½” UNF 150mm 50mmVPN4104 Five leaf ½” UNF 125mm 50mm VPN4104

Single and tandem mudguards

U bolts

Leaf springsTwin leaf parabolic road spring. Fittedto some Ifor Williams trailers manufacturedafter 1994. Length following curve of spring 800mm.Width 50mm. 12mm diameter hole in spring bush.Fit with VLG1928 bolt and VLG4237

Part No. VPN4100 - Twin

Part No. VPN4105 - Single

Leaf springs bushSingle and twin leaf spring eyebush. Used in VPN4100 andVPN4105 leaf springs

Part No. VPN4106

Hex coarse bolt & nutSpecific M12 x 80mm Grade 10.9mechanically plated bolt. Fitsthrough VPN4106 bush when fittingVPN4100 and VPN4105 leafsprings. Lock nut to suit VLG4237

Part No. VLG1928

Wheel bearing kitTypically fitted to Ifor Williams trailers produced before Septem-ber 1992. Kit includes two taper roller bearings 18590/18520(VLD3843) and an oil seal 43mm x 75mm x 10mm.

Part no. VPN3075 - 43x75x10mm

Part No. VPN3076 - 55x75x10mm

Wheel bearing kitTypically fitted to Ifor Williams trailers produced after January1994. Kit includes wheel bearing, bearing retaining circlip andstake nut (VPN4015). Stake nut should be tightened to 350Nm.

Part no. VPN4014

Wheel bearingTaper roller bearing L44610 marked on cup. 44600LA markedon cone. Cone has incorporated seal. Outside diameter ofbearing 50mm. Outside diameter including seal 52mm. Insidediameter 25mm. Overall width 16mm.

Part No. VPN4005

LOWPRICES For more information on

trailer parts and accessoriesplease visit

www.vapormatic.co.uk

Or get a copy of our Trailer PartsCatalogue (PAA5018)

RRPRRP

RRPRRP

RRPRRP

RRPRRP

RRPRRP

RRPRRP

RRPRRP

RRPRRP

RRPRRP

RRPRRP

Original equipment manufacturers names and part numbers are quoted for reference purposes only and are not intended to infer thatour replacement parts are used as original equipment.

Button11: e33: e2: e1: e3: e4: e5: e6: e7: e8: e9: e10: e11: e12: e13: e14: e15: e16: e17: e18: e19: e20: e21: e22: e23: e24: e25: e26: e27: e28: e29: e30: e31: e32: e34: e35: e36: e37: e38: e39: e40: e41: e42: e43: e44: e45: e46: e47: e48: e49: e50: e51: e52: e53: e54: e55: e56: e57: e58: e59: e60: e61: e62: e63: e64: e65: e66: e67: e68: e69: e70: e71: e72: e73: e74: e75: e76: e77: e78: e79: e80: e81: e82: e83: e84: e85: e86: e87: e88: e89: e90: e91: e92: e93: e94: e95: e96: e97: e98: e99: e100: e101: e102: e103: e104: e105: e106: e107: e108: e109: £58.90e110: e111: e112: e113: e114: e115: e116: e117: e118: e119: e120: e121: e122: e123: e124: e125: e126: e127: e128: e129: e130: e131: e132: e133: e134: e135: e136: e137: e138: e139: e140: e141: e142: e143: e144: e145: e146: e147: e148: e149: e150: e151: e152: e153: e154: e155: e156: e157: e158: e159: e160: e161: e162: e163: e164: e165: e166: e167: e168: e169: e170: e171: e172: e173: e174: e175: e176: e177: e178: e179: e180: e181: e182: Text9b: Company address: Your contact details: Insert Telephone/Fax/email/web