User Manual Please read the Important Notice and Warnings at the end of this document V1.2www.infineon.com TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard TC3X4L
TriBoard Manual TC3X4LHardware: Tr iBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
About this document
Scope and purpose
The User Manual provide information about using, configuration and connecting the TriBoard with InfineonAURIX™ TC3X4 LQFP device. The manual provide information for different hardware types. There exist differenthardware with Through Hole socket (TriBoard TC3X4L TH) and soldered devices (TriBoard TC3X4L). Theschematic is identically for the all boards if not other mentioned in chapter schematic. The placing on the boardsis the same, all components are on the same location.
Intended audience
Design, verfication, test and software engineers will use this document to get an understanding of thefunctionality and connections of the TriBoard.
User Manual TOC-2 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Table of Contents
About this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preface-1
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TOC-2
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12.1 Summary of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12.2 Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22.3 Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
3 TriBoard Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13.1 Soldered board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13.2 Socketed board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13.2.1 Usable devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13.2.2 Restricted usable devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13.3 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13.3.1 Failsafe handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23.4 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23.5 Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33.6 USB Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33.6.1 Serial Connection to PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33.6.2 miniWiggler JDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-43.7 FlexRay™ (E-RAY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-43.8 Serial Eeprom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-43.9 MultiCAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-43.10 LIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-53.11 Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-53.12 HSCT (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-63.12.1 High speed with HSCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-63.13 ADC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-73.14 Other peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-83.15 Toggle LED’s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-83.16 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-83.17 Debug System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-93.17.1 OCDS1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-93.17.2 DAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-93.17.3 DAP_SCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-93.17.4 High speed with DAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-93.17.5 ETK connector (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-103.17.6 EmW Power (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
4 TriBoard Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14.1 HW Boot Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14.1.1 Default Pad State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14.1.2 Bootmode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14.2 Assembly Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24.2.1 General optional resistors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24.2.2 Resistors for peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
5 Signal (on board used) Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15.1 Power Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Table of Contents
User Manual TOC-3 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Table of Contents
5.2 Reset Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15.3 Config Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25.4 Clock Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25.5 Debug Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25.6 Peripheral Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
6 Connector Pin Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16.1 On Board only used signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16.2 TC3X4 Connector / Top View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26.3 Power connector pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-46.4 USB connector pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-46.5 FlexRay™ (ERAY) connector pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-46.6 CAN connector pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-46.7 LIN connector pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-56.8 HSCT connector pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-56.9 Ethernet connector pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-56.10 OCDS1 connector pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-66.11 DAP connector pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-66.12 ETK connector pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-76.13 Ethernet miniWiggler power connector pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
7 Schematic and Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17.1 Known problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17.1.1 Known problems on TriBoard TC3X4L TH V1.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17.1.2 Known problems on TriBoard TC3X4L V1.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17.2 Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17.3 Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-97.4 Layout with Dimensioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11
User Manual 1-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Introduction
1 IntroductionWe congratulate you on your purchase of the TriCore Evaluation Board. This kit is a versatile tool, providing quickaccess to the capabilities of TriCore's powerful architecture.Applications can be developed easily. The Evaluation Board is equipped with a variety of memories andperipherals for connection to the environment. There is also an interface for the On Chip Debugging Features(OCDS1 and DAP). The Evaluation Board allows easily the development of TriCore applications with the corresponding tools.Subsequently, the applications can be downloaded and can be tested with the powerful debugger software.This TriBoard Hardware Manual familiarizes you with the TriCore Evaluation Board and guides you through theinitial configuration of the TriBoard. For detailed technical information about the TC3X4 LQFP (e.g. TC374, TC364) please refer to the User Manual ofthe used device.
User Manual 2-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Features
2 Features
2.1 Summary of Features– Infineon’s TC3X4 (TC374, TC364) AURIX™ 2G Controller in LQFP-144 Package– FlexRay™ 1) Transceivers– High Speed CAN Transceivers (CAN-FD capable)– USB to UART bridge– Ethernet PHY– Serial Eeprom– LIN Transceiver– Crystal 20MHz (default) or External Clock– USB miniWiggler JDS for easy debugging– 8 Low Power Status LEDs– 8-DIP switches for configuration– access to all pins of controller– 100mm x 160mm (EURO-Board)
ConnectorsThe TC3X4L TriBoard offers a wide variety of connectors:
– Standard power connector– Micro USB connector for ASC Interface (ASC0) and miniWiggler– RJ45 connector for Ethernet– 16-pin header for JTAG interface (OCDS)– 2 x 10-pin header for DAP and DAP_SCR– 10pin (2x5) Header for LIN Transceiver (LIN)– 2 x 10pin (2x5) Header for CAN High Speed Transceiver (CAN0 and CAN1)– 2 x 10pin (2x5) Header for FlexRay™ (ERAY-A and ERAY-B)– four 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals– optional ETK connector– optional 6pin (IEEE1394) Socket for HSCT
Components– Infineon’s Multi Voltage Safety Micro Processor Supply TLF35584QV– Three LEDs to validate power supply (5Volt / 3,3 Volt / 1,25 Volt)– LED indicating safe state signal 2 from TLF35584– LED indicating /HDRST (ESR0) active state– LED indicating activ miniWiggler JDS– LED switched via DAS software– 2 x Infineon’s FlexRay™ Transceiver TLE9221SX– 2 x Infineon’s High Speed CAN-Transceiver TLE9251VSJ– Infineon’s LIN-Transceiver TLE 7259-3GE– USB to UART bridge FT2232HL (FTDI)– Single-Chip/Port 10/100M Ethernet PHYCEIVER with Auto MDX RTL8201FI-VC-CG (Realtek)– 8 general purpose LEDs– 2K I2C Serial Eeprom with EUI-48™ 2) Node Identity (MICROCHIP)
1) FlexRay™ is a trademark of FlexRay Consortium.
User Manual 2-2 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Features
– Reset switch– Enable switch– Generic switch– 4-pin Dip switch
Zero Ohm BridgesZero Ohm resistors give the flexibility to configure the systems functionality.
2.2 Block Diagram
Figure 2-1 TriBoard Block Schematic
2) EUI-48™ is trademarked by IEEE
MicroUSB miniWiggler
OCDS1
USB
XTAL
FlexRay™ Transceiver
Transceiver
TxCAN0
TxCAN1
RxCAN0
RxCAN1
TC3X4(e.g.
TC374, TC364)TriCore
CPU
PLLCAN0
CAN1
ER
AY
BE
RAY
A
TX0
RX0
8 LED’s (P33.4 up to P33.7,
P20.11 up to P20.14)Serial EEPROM with EUI-48™
RMII PHYTwisted Pair
RJ45
LIN LIN
Transceiver
TX1
RX1
HSC
Top
tiona
lHSCT - TX/RX
I²C
WAKEUP
QSPI2
Multi Voltage Safety Micro Processor Supply
TLF35584QV
ENA
User Manual 2-3 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Features
2.3 Placement
Figure 2-2 TriBoard TC3X4L (TH) V1.0 Placement
U201
X404
S502
X306U307
Y301
X604
X402
S201
X201
X305
X304
X303
C303
D401
BU401
D402
U401
Y401
Y201
T301
T302
X301
X302
X602X603
X601
D302 D303 D304 D305 D306 D307 D308 D309
D505
D506
D507D504
X401
X501
S501
U502
D508
U501
L502
L501
C502
C501
R501
S202
X502
X406
DAP
User Manual 3-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Information
3 TriBoard Information
3.1 Soldered boardTriBoard TC3X4L V1.0 is the soldered board and will be available only with usable devices. Please see also chapterUsable devices.
3.2 Socketed boardTriBoard TC3X4L TH V1.0 is the socketed board.
3.2.1 Usable devices
Note: Note: Please check always the latest manual for complete list of usable/tested devices.
The board can be used with the following devices:• TC374• TC364DP-64F300W
Note: For TC364: AN42 is connected directly to ground and AN43 is connected to VDDM via R223. Additional there is a capacitor (CB206) between AN43 and AN42.
3.2.2 Restricted usable devices• None
3.3 Power SupplyAll needed voltages are generated via Infineon’s Multi Voltage Safety Micro Processor Supply TLF35584QV and viathe microcontroller itself (+1,25V).The supply device is available as two different devices:TLF35584QVVS1 -> +5V standby voltage, +5V TriCore supply (V_UC)TLF35584QVVS2 -> +3,3V standby voltage, +3,3V TriCore supply (V_UC)Dependent of the assembled device the board works with 5V or 3,3V IO.The TLF35584QV provide the following voltages:+3,3V or +5V for standby (connected to VEVRSB)+3,3V or +5V for TriCore (connected to VEXT)+5V communcation supply (used by CAN and FlexRay™ transceivers)+5V voltage reference (connected to VDDM and VAREFx)+3,3V via LDO directly from pre regulator (used by Ethernet PHY)Applying a stable supply voltage causes the power on reset after a short period. The three LED's (V_UC, +3.3V,+1V25) indicate the status of the on board generated voltages.A manual power on reset is executed by pressing the reset button.The Board has to be connected to a +3,5V to +40V DC power supply.The power consumption is not specified yet but a supply with 12V and 500mA is recommended. The pinout forthe supply connector is shown in Figure 6-3. There can be used any standard power pack with a connector wherethe positive line is surrounded by the ground line.
User Manual 3-2 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Information
3.3.1 Failsafe handlingIn case that the device don’t contains a program which disable or service the window watchdog and error pinmonitor of the TLF35584 then the TLF35584 is going to a FAILSAFE state where all supplies are switched off. Thisstate can be left via reconnect the power plug or via the ENA button (S502). In this case you must connect adebugger which is able to disable the window watchdog and error pin monitor to reprogram the microcontroller.In the default state of the board the switching to FAILSAFE state is switched off via resistor R508. If you will use/evaluate all safety features of the TLF35584 make sure that R509 is assembled and R508 is notassembled. Make sure that you have a proper initialization of TLF35584 in your softare.Resistor R508 and R509 are red marked in the following Figure 3-1:
Figure 3-1 Resistors for TLF35584 Safety feature handling with switch on
3.4 LEDsThere are 15 LEDs on board:
– D302 up to D305 (blue) -> toogle LEDs connected to P33.4 ... P33.7– D306 up to D309 (blue) -> toogle LEDs connected to P20.11 ... P20.14– D504 RST (red) -> RESET LED indicate the reset state of the board (/ESR0)– D505 +1V25 (green) -> +1V25 power supply indication– D506 +3V3 (green) -> +3,3V power supply indication– D507 V_UC (green) -> +5V/+3,3V power supply indication– D508 SS2 (green) -> safe state signal 2 indication– D402 ACT (green) -> on board miniWiggler JDS is ACTIV– D401 RUN (blue) -> Debug RUN mode (switched by DAS Server)
U201
R395
X404
R212
S502
R222 CB205
R379
R372
C305
C310
X306
CB313
CB314
CB315
C311
U307
Y301
X604R249
R246R245
R244
X402
S201
R377
R204R205
R215R214
X201
X305
X304
X303
R240
R236
R234
R232
R230
R223
R361
R359
R211
D301
CB206
C303
U408U407U406
R451
R455
R456
R454
R446
R444
CB419
CB418
CB417
CB416
CB415
CB414
D401
R430R429
R423
CB405
C402
R411
BU401
L401
D402
R401
CB401
U404
U401
Y401
CB408
R403
R402
CB402
R344
R524
R424
R425
R426
R427
R428 CB520
R201
CB204
R203
R202
C201
C202
R206
R207 Y201
R337
R357
R324
R399
R391 R392 R393 R394 R396 R397
CB309
R532
C301
C302
R439
R531
R335
R336
R355
R356
U305
T301
T302
X301
X302
X602X603
X601
D302
D303
D304
D305
D306
D307
D308
D309
D505
D506
D507D504
X401
X501
S501
R354
C519
R452
CB203
R213R216
R398
U502C505
D508
U501
L502
L501 CB501
C502
C507
C509
C508
C501
C503
C504
R501
R507
R508
R509
CB502
R231
R233
R235
R237
R241
R255
R256
R390
R375
R376
R348
R349
R525
S202
X502
R346
R 347
R457
X406
C522
CB316
CB317
U308
R248
User Manual 3-3 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Information
3.5 ClockOn the board is a fixed crystal with 20MHz assembled. You can change this by replacing Y101 (soldered).
3.6 USB ConnectorThe USB connector is used for connection to a PC. Via the USB it is possible to power the board, using the ASCLIN0as serial connection via USB and Debugging via DAS. For the pinout of USB socket see Figure 6-4.NOTE: Before connecting the board to the PC, make sure that the actual DAS software is installed on the PC. Foractual DAS software please contact your local FAE.The software can also be found on:
DAS website3.6.1 Serial Connection to PCAfter the first connection of USB to a PC the needed driver will be installed automatically. During this there willbe created a new COM port on PC. This COM port can be used to communicate with the board via ASCLIN0 of thedevice. Per default the ASCLIN0 is used on P14.0 and P14.1 (e.g. Generic Bootstrap Loader) . In case you will usethe Generic Bootstrap Loader via CAN or ASCLIN0 via P15.2 and P15.3 you must:
– remove R436 and R437 (this disconnect the serial connection from P14.0 and P14.1)– remove R301 and R302 (this disconnect the CAN0 transceiver from P20.7 and P20.8)– assemble R438 and R440 with 0R resistor (size 0603) to connect P15.2 and P15.3 to serial connection– assemble R303 and R304 with 0R resistor (size 0603) to connect P14.0 and P14.1 to CAN0 transceiver
The mentioned resistors are red marked in Figure 3-2.
Figure 3-2 Resistors for ASC connection (ASC0)
X703
CB511
R388
R380
R378 Q301
R368
R371
R382
R419
R440
R369
R367
C320
C317
C316C315C314
C313
C312
Q403
R389
R383
R385
R370 CB311
CB312
C208
C207
C205
C204C203
R433
R523
R431
R381
R314
R252R250
R251R253
R254
CB202R208
R408
U306
R521
R238
R365R364
R363
R362
R360 CB310
C304
R449
R448R447
R445
R443
R413
U405
L402
CB4
13C403
D403
R404C401
R450
R442
R441
CB412
CB411
CB410
C405C404
R422
R421
U403
Q402
Q401
R412
C406
R420
R414
R418
R417 R416
R415
R410
R 409CB407
CB403
R407
U402
R406 R405
CB406
CB404
R305
R306
R308 R309
R315
R316
R318
R319
R522
R301
R311
R341
R340
R321
R322
R220R221
R533
R323
R343
CB301
CB302
CB512
CB513
CB515
CB5
16
CB517
CB518
CB5
19
R537
R307
R317
R538
R534
R513
R535
R536
C515
R511
R512
R510
Q502
Q504
Q503
X702
X704X701
U301
U302
R302
R342
CB303
CB304
CB305
CB306
CB307
CB308
R303
R304
R338
R330
R331
R358
R350
R351
U303
U304
R332
R334
R333
R352
R353
R320
CB201R209
CB510
R520
D503
R505
R504
C510
R502
R506
Q505 Q501
D501
C512
C511
D502
R503
R239
R312
R436
R437
R438
R313
R373
R374
Q506
L503
C520
C521
C506
CB506 U503
CB409R386
C306
User Manual 3-4 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Information
3.6.2 miniWiggler JDSThe miniWiggler JDS is a low cost debug tool which allows you access to the JTAG of the device. Make sure thatyou have the latest DAS release. Debugging is possible via the DAS Server ‘UDAS‘. Please contact your prefereddebug vendor for support of DAS.If you have connected the board to the PC and there runs the DAS server, then a working connection is visible viathe green ACTIV LED.The status RUN LED is switched on/off through the DAS Server, depending on the used debugger (client).IMPORTANT: Make sure that there is no or a tristated connection on X401 (OCDS1) and X402 (DAP) if theACTIV LED is on.Per default the miniWiggler is connected to the DAP. If resistors R214, R215 and R216 assembled (default) thenthe standard DAP is connected to miniWiggler. If all this resistors are not assembled then the miniWiggler can’tbe used. In this case only the DAP connectors X402 and X406 can be used. See Figure 3-7.
3.7 FlexRay™ (E-RAY)The board has 2 IDC10 plugs for FlexRay™ Communication (channel A and B) with up to 10 Mbit/s. For the pinoutof the plugs see Figure 6-5. You can use a IDC female connector with crimpconnector, flat cable and SUB-D 9 plugwith crimpconnector to have a 1:1 adapter to SUB-D 9.The transceiver are connected to the TriCore device via zero ohm resistors (R320 up to R324 and R340 up to R344)which must be removed to use the ports outside.ERAY-A can be connected to P02.0, P02.1 and P02.4. Transceiver for channel A can be enabled/disabled via P10.1.The error state of transceiver channel A can be read out via P10.2.ERAY-B is connected to P02.2, P02.3 and P02.5. Transceiver for channel B can be enabled/disabled via P20.10. Theerror state of transceiver channel A can be read out via P20.9.For more information look in the user manual for TC3X4 LQFP.
3.8 Serial EepromThe I2C via P15.4 and P15.5 of the TC3X4 is connected to a serial EEPROM with a size of 2KBit (2 x 128 x 8). The slaveaddress of this EEPROM is 0x50. The upper half of the array (80h-FFh) is permanently write-protected. Writeoperations to this address range are inhibited. Read operations are not affected. This upper half contains a pre-programmed EUI-48™ node address which can be used as MAC ID for Ethernet. The other 128 bytes are writableby customer.To disconnect (disable) the EEPROM remove resistor R348 and R349.
3.9 MultiCANOn the board are two CAN transceiver connected to the CAN0 and CAN1 of TC3X4 LQFP. The transceivers areconnected to two IDC10 plug. For the pinout of IDC10 plug see Figure 6-6. You can use a IDC female connector withcrimpconnector, flat cable and SUB-D 9 plug with crimpconnector to have a 1:1 adapter to SUB-D 9.The transceiver are connected to the TriCore device via zero ohm resistors (R301 up to R304 and R311 up to R314)which must be removed to use the ports outside.CAN0 can be used via P20.7 and P20.8 (CAN0 node 0, default) or P14.0 and P14.1 (CAN0 node 1). CAN1 can be usedvia P13.0 and P13.1 (CAN1 node 0, default) or P00.0 and P00.1 (CAN1 node 0).
User Manual 3-5 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Information
3.10 LINOn the board is one LIN transceiver connected to the ASCLIN1 on TC3X4 LQFP (P15.0 and P15.1). The transceiverare connected to one IDC10 plug. For the pinout of IDC10 plug see Figure 6-7. You can use a IDC female connectorwith crimpconnector, flat cable and SUB-D 9 plug with crimpconnector to have a 1:1 adapter to SUB-D 9.To disconnect the LIN remove resistor R364 and R365. The LIN can be used in master and in slave mode. For the master mode there is per default a pull-up of 1K (R360)and a capacitor of 1nF (C304) on the BUS assembled. For using the LIN in slave mode the pull-up resistor R360must be removed and maybe the capacitor changed to a smaller value (e.g. 220pF).The mentioned resistor and capacitor are red marked in Figure 3-3
Figure 3-3 Components for LIN Master Mode
3.11 EthernetThe TriBoard provide a RJ45 connector (X306) for twisted pair ethernet connections.The TriBoard use a RealtekSingle-Chip/Port 10/100M Ethernet PHYCEIVER with Auto MDX RTL8201FI-VC-CG as physical interface device. Formore information about the ethernet modul see TC3X4 User’s Manual, about the PHY see the RTL8201FIdatasheet. For the pinout of RJ45 see Figure 6-9.The PHY is connected to the TriCore device via resistors and resistor arrays (R368 up to R374) which must beremoved to use the ports outside.For the connection between TriCore and PHY is used RMII.For MD connection there is used P00.0 and P02.8. To use this communication way please make sure that R376 isnot assembled (default). For R376 position please see also Figure 4-4.
Note: Please note that the RGMII interface can’t be used of limited pin availability. Therefore Gigabit is not usable with this board only 10M and 100M.
X703
CB511
R388
R380
R378 Q301
R368
R371
R382
R419
R440
R369
R367
C320
C317
C316C315C314
C313
C312
Q403
R389
R383
R385
R370 CB311
CB312
C208
C207
C205
C204C203
R433
R523
R431
R381
R314
R252R250
R251R253
R254
CB202R208
R408
U306
R521
R238
R365R364
R363
R362
R360 CB310
C304
R449
R448R447
R445
R443
R413
U405
L402
CB4
13C403
D403
R404C401
R450
R442
R441
CB412
CB411
CB410
C405C404
R422
R421
U403
Q402
Q401
R412
C406
R420
R414
R418
R417 R416
R415
R410
R 409CB407
CB403
R407
U402
R406 R405
CB406
CB404
R305
R306
R308 R309
R315
R316
R318
R319
R522
R301
R311
R341
R340
R321
R322
R220R221
R533
R323
R343
CB301
CB302
CB512
CB513
CB515
CB5
16
CB517
CB518
CB5
19
R537
R307
R317
R538
R534
R513
R535
R536
C515
R511
R512
R510
Q502
Q504
Q503
X702
X704X701
U301
U302
R302
R342
CB303
CB304
CB305
CB306
CB307
CB308
R303
R304
R338
R330
R331
R358
R350
R351
U303
U304
R332
R334
R333
R352
R353
R320
CB201R209
CB510
R520
D503
R505
R504
C510
R502
R506
Q505 Q501
D501
C512
C511
D502
R503
R239
R312
R436
R437
R438
R313
R373
R374
Q506
L503
C520
C521
C506
CB506 U503
CB409R386
C306
User Manual 3-6 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Information
3.12 HSCT (optional)The TriBoard provide a footprint of IEEE 1394 socket (X201) for connection to other TC3XX via HSCT.
Note: Don’t use X201 for connection to any IEEE 1394 device, this can destroy the board and/or the connected device.
For connect two TriBoards you need to assemble this socket (Lumberg 2415 01) on each board and connect theboards with a standard 6 pin IEEE 1394 cable. For the pinout of socket see Figure 6-8.
3.12.1 High speed with HSCTFor use the HSCT connection between two board you need to remove 5 resistors to have a very short connectionbetween device and connector. On the TC3X4L Triboard this 5 resistors are R250, R251, R252, R253 and R254 (redmarked in Figure 3-4). This resistors needs to be removed.mportant: When the resistors are removed then the port signals P20.0, P21.2, P21.3, P21.4 and P21.5 are nolonger available on the 80 pin samtec connectors.
Figure 3-4 Resistors for high speed HSCT
X703
CB511
R388
R380
R378 Q301
R368
R371
R382
R419
R440
R369
R367
C320C317
C316C315C314
C313
C312
Q403
R389
R383
R385
R370 CB311
CB312
C208
C207
C205
C204C203
R433
R523
R431
R381
R314
R252R250
R251R253
R254
CB202R208
R408
U306
R521
R238
R365R364
R363
R362
R360 CB310
C304
R449
R448R447
R445
R443
R413
U405
L402
CB4
13C403
D403
R404C401
R450
R442
R441
CB412
CB411
CB410
C405C404
R422
R421
U403
Q402
Q401
R412
C406
R420
R414
R418
R417 R416
R415
R410
R 409CB407
CB403
R407
U402
R406 R405
CB406
CB404
R305
R306
R308 R309
R315
R316
R318
R319
R522
R301
R311
R341
R340
R321
R322
R220R221
R533
R323
R343
CB301
CB302
CB512
CB513
CB515
CB5
16
CB517
CB518
CB5
19
R537
R307
R317
R538
R534
R513
R535
R536
C515
R511
R512
R510
Q502
Q504
Q503
X702
X704X701
U301
U302
R302
R342
CB303
CB304
CB305
CB306
CB307
CB308
R303
R304
R338
R330
R331
R358
R350
R351
U303
U304
R332
R334
R333
R352
R353
R320
CB201R209
CB510
R520
D503
R505
R504
C510
R502
R506
Q505 Q501
D501
C512
C511
D502
R503
R239
R312
R436
R437
R438
R313
R373
R374
Q506
L503
C520
C521
C506
CB506 U503
CB409R386
C306
User Manual 3-7 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Information
3.13 ADCOn this boards are 5 ADC channels prepared with a low pass filter. On pin AN7, AN20, AN21, AN44 and AN45 isassembled a capacitor of 47nF and a serial resistor of 4,7K. The filter components are red marked in the followingfigures (Figure 3-5 and Figure 3-6).
Figure 3-5 Filter components of ADC channels on Top Side
U201
R395
X404
R212
S502
R222 CB205
R379
R372
C305
C310
X306
CB313
CB314
CB315
C311
U307
Y301
X604
R249
R246R245
R244
X402
S201
R377
R204R205
R215R214
X201
X305
X304
X303
R240
R236
R234
R232
R230
R223
R361
R359
R211
D301
CB206
C303
U408U407U406
R451
R455
R456
R454
R446
R444
CB419
CB418
CB417
CB416
CB415
CB414
D401
R430R429
R423
CB405
C402
R411
BU401
L401
D402
R401
CB401
U404
U401
Y401
CB408
R403
R402
CB402
R344
R524
R424
R425
R426
R427
R428 CB520
R201
CB204
R203
R202
C201
C202
R206R207 Y201
R337
R357
R324
R399
R391 R392 R393 R394 R396 R397
CB309
R532
C301
C302
R439
R531
R335
R336
R355
R356
U305
T301
T302
X301
X302
X602X603
X601D302
D303
D304
D305
D306
D307
D308
D309
D505
D506
D507D504
X401
X501
S501
R354
C519
R452
CB203
R213R216
R398
U502C505
D508
U501
L502
L501 CB501
C502
C507
C509
C508
C501
C503
C504
R501
R507
R508
R509
CB502
R231
R233
R235
R237
R241
R255
R256
R390
R375
R376
R348
R349
R525
S202
X502
R346
R 347
R457
X406
C522
CB316
CB317
U308R248
User Manual 3-8 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Information
Figure 3-6 Filter components of ADC channels on Bottom Side
3.14 Other peripheralsFor all other peripherals there are no special plugs on the board. The peripheral signals are available on thedifferent connectors. See “Connector Pin Assignment” on Page 6-1.
3.15 Toggle LED’sThe status LED’s are low active and can be controlled by Software.Port 20 pin 11 up to pin 14 are connected to single LED’s (D306... D309) and powered by the normalmicrocontroller voltage.Port 33 pin 4 up to pin 7 are connected to single LED’s (D302... D305) and powered by the standby voltage. Thismeans that this LED’s can be are activ also when the board is in standby mode and only the standby voltageavailable (port 33 is powered by VEVRSB pin which is connected to standby supply of TLF35584). In this case theport pins are controlled by the standby controller if available.
3.16 ButtonsOn the board are three buttons.The reset button (S501) will apply a warm power on reset to the device.The ENA button (S502) will be used to enable/wakeup the TLF35584.The P33.11 button (S202) can be used by software as input. Also can this button used by the standby controllerto react on an event when only standby supply is available (e.g. wakeup the TLF35584 via P33.10).
X703
CB511
R388
R380
R378 Q301
R368
R371
R382
R419
R440
R369
R367
C320
C317
C316C315C314
C313
C312
Q403
R389
R383
R385
R370 CB311
CB312
C208
C207
C205
C204C203
R433
R523
R431
R381
R314
R252R250
R251R253
R254
CB202R208
R408
U306
R521
R238
R365R364
R363
R362
R360 CB310
C304
R449
R448R447
R445
R443
R413
U405
L402
CB4
13C403
D403
R404C401
R450
R442
R441
CB412
CB411
CB410
C405C404
R422
R421
U403
Q402
Q401
R412
C406
R420
R414
R418
R417 R416
R415
R410
R 409CB407
CB403
R407
U402
R406 R405
CB406
CB404
R305
R306
R308 R309
R315
R316
R318
R319
R522
R301
R311
R341
R340
R321
R322
R220R221
R533
R323
R343
CB301
CB302
CB512
CB513
CB515
CB5
16
CB517
CB518
CB5
19
R537
R307
R317
R538
R534
R513
R535
R536
C515
R511
R512
R510
Q502
Q504
Q503
X702
X704X701
U301
U302
R302
R342
CB303
CB304
CB305
CB306
CB307
CB308
R303
R304
R338
R330
R331
R358
R350
R351
U303
U304
R332
R334
R333
R352
R353
R320
CB201R209
CB510
R520
D503
R505
R504
C510
R502
R506
Q505 Q501
D501
C512
C511
D502
R503
R239
R312
R436
R437
R438
R313
R373
R374
Q506
L503
C520
C521
C506
CB506 U503
CB409R386
C306
User Manual 3-9 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Information
3.17 Debug System
3.17.1 OCDS1The OCDS1 signals are connected to the IDC16 plug (X401). They work with the port supply of Microcontroller (+5Vdefault or +3,3V). For pinout of the connector see Figure 6-10. You can connect any debugger to this connector. The signals /BRKIN and /BRKOUT are not connected per default. If you need this signals in the connector thenassemble R424 and R425 or R426 with a 0R resistor.If you connect a debug hardware make sure that the miniWiggler JDS (see “miniWiggler JDS” on Page 3-4) is notactiv (ACTIV LED is off) and on the DAP connector (X402) is no hardware connected or the hardware is tristated. If the ACTIV LED is on, then stop the active DAS Server ’UDAS’ and/or remove the USB connection to the PC.If R214 up to R216 not assembled then the connector is not usable.
3.17.2 DAPThe board comes with a DAP connector (X402). For pinout of this connector see Figure 6-11. You can connect aDAP hardware here. If you use this connector make sure that the miniWiggler JDS is not activ (ACTIV LED is off)and a connected OCDS1 hardware is disconnected or tristated.
3.17.3 DAP_SCRAdditional DAP connector (X406) is connected to DAP_SCR. This DAP can be used as private DAP connection tothe standby controller. For pinout of this connector see Figure 6-15. You can connect a DAP hardware here. ThisDAP use P33.6 and P33.7 which are connected to LED on the board. Maybe it is necessary to remove R393 andR394 if the speed of the connection is not fast enough.
3.17.4 High speed with DAPFor use the DAP connection with 160 MHz you need to remove 3 resistors to have a very short connection betweendevice and connector. On the TC3X4L Triboard this 3 resistors are R214, R215 and R216 for DAP (red marked inFigure 3-7). This resistors needs to be removed. Important: When the resistors are removed then only the DAP connector on the board can be used. The on boardwiggler and the OCDS1 connector couldn’t be use (are disconnected) in this case, also the DAP/JTAG part of theETK connector couldn’t be used.All resistors are red marked in the following figure:
User Manual 3-10 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Information
Figure 3-7 Location of DAP resistors on Top Side
3.17.5 ETK connector (optional)The TriBoard provide a 10 pin samtec connector (X404) for connecting to an ETK. This connector should beassembled by your self if needed.For the pinout of connector see Figure 6-12.The needed Samtec connector is: TFM-105-02-A.
3.17.6 EmW Power (optional)The TriBoard provide the 4 pin power connector (X502) for the Ethernet miniWiggler (EmW). This connectorshould be assembled by your self if needed.For the pinout of connector see Figure 6-13.The needed Samtec connector is the JST B4B-PH-K.The connector provide the input voltage to the Ethernet miniWiggler and an enable/wakeup signal connected toTLF35584 and a standby voltage of +1,25V connected to VDDSB of device. In case the EmW is used you mustremove R522. If R522 is removed then you must make sure that the EmW is always connected. Otherwise withassembled R522 (default) you should not connect the pin 4 of connector.The mentioned resistor is red marked in Figure 3-8
U201
R395
X404
R212
S502
R222 CB205
R379
R372
C305
C310
X306
CB313
CB314
CB315
C311
U307
Y301
X604
R249
R246R245
R244
X402
S201
R377
R204R205
R215R214
X201
X305
X304
X303
R240
R236
R234
R232
R230
R223
R361
R359
R211
D301
CB206
C303
U408U407U406
R451
R455
R456
R454
R446
R444
CB419
CB418
CB417
CB416
CB415
CB414
D401
R430R429
R423
CB405
C402
R411
BU401
L401
D402
R401
CB401
U404
U401
Y401
CB408
R403
R402
CB402
R344
R524
R424
R425
R426
R427
R428 CB520
R201
CB204
R203
R202
C201
C202
R206
R207 Y201
R337
R357
R324
R399
R391 R392 R393 R394 R396 R397
CB309
R532
C301
C302
R439
R531
R335
R336
R355
R356
U305
T301
T302
X301
X302
X602X603
X601
D302
D303
D304
D305
D306
D307
D308
D309
D505
D506
D507D504
X401
X501
S501
R354
C519
R452
CB203
R213R216
R398
U502C505
D508
U501
L502
L501 CB501
C502
C507
C509
C508
C501
C503
C504
R501
R507
R508
R509
CB502
R 231
R233
R235
R237
R 241
R255
R256
R390
R375
R376
R348
R349
R525
S202
X502
R346
R 347
R457
X406
C522
CB316
CB317
U308
R248
User Manual 3-11 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Information
Figure 3-8 Resistor for VDDSB
X703
CB511
R388
R380
R378 Q301
R368
R371
R382
R419
R440
R369
R367
C320
C317
C316C315C314
C313
C312
Q403
R389
R383
R385
R370 CB311
CB312
C208
C207
C205
C204C203
R433
R523
R431
R381
R314
R252R250
R251R253
R254
CB202R208
R408
U306
R521
R238
R365R364
R363
R362
R360 CB310
C304
R449
R448R447
R445
R443
R413
U405
L402
CB4
13C403
D403
R404C401
R450
R442
R441
CB412
CB411
CB410
C405C404
R422
R421
U403
Q402
Q401
R412
C406
R420
R414
R418
R417 R416
R415
R410
R 409CB407
CB403
R407
U402
R406 R405
CB406
CB404
R305
R306
R308 R309
R315
R316
R318
R319
R522
R301
R311
R341
R340
R321
R322
R220R221
R533
R323
R343
CB301
CB302
CB512
CB513
CB515
CB5
16
CB517
CB518
CB5
19
R537
R307
R317
R538
R534
R513
R535
R536
C515
R511
R512
R510
Q502
Q504
Q503
X702
X704X701
U301
U302
R302
R342
CB303
CB304
CB305
CB306
CB307
CB308
R303
R304
R338
R330
R331
R358
R350
R351
U303
U304
R332
R334
R333
R352
R353
R320
CB201R209
CB510
R520
D503
R505
R504
C510
R502
R506
Q505 Q501
D501
C512
C511
D502
R503
R239
R312
R436
R437
R438
R313
R373
R374
Q506
L503
C520
C521
C506
CB506 U503
CB409R386
C306
User Manual 4-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Configuration
4 TriBoard Configuration
4.1 HW Boot Configuration
Figure 4-1 HW Configuration DIP-Switches
The picture above shows the definition of the boot HW configuration switch. The meaning of the switches will bedescribed in the following table (Table 4-1).
Note: The ON position of the switch is equal to a logical LOW at the dedicated pin.
4.1.1 Default Pad StateP14.4 / HWCFG6 is used to select the Default Pad State. Dipswitch 1 used to select this.In case that dispswitch1 is set to ON then all I/O pins are in tristate otherwise the internal pull-up devices areenabled on the I/O pins. Please note that after change Dipswitch 1 you must make a power cycle (switch off ->switch on) to use the new configuration.In case that TriState is selected (Dipswitch 1 is set to ON) then the I/O pins are floating. If you need a specific levelon different pins during startup (e.g. driver pins) then you must add the needed pull device (up or down). Somepins (especially the HWCFG pins) haven always the needed external pull-up and/or pull-down resistor assembledon the board.
4.1.2 Bootmode
Table 4-1 User Startup Modes 1)2)3)
1) The shadowed line indicates the default setting.2) ’x’ represents the don’t care state.3) 2 to 4 are the Dip Switch numbers.
HWCFG[5...3] Type of Boot 2 3 4
XX1 Start-up mode is selected by Boot Mode Index X X OFF
110 Internal Start from Flash OFF OFF ON
100 Alternate Boot Mode, Generic Bootstrap Loader on fail (P14.0/P14.1) ON OFF ON
010 Alternate Boot Mode, ASC Bootstrap Loader on fail (P15.2/P15.3) OFF ON ON
000 Generic Bootstrap Loader (P14.0/P14.1) ON ON ON
2
on
1 3 4
P14.4
P10.5
P10.6
P14.3
User Manual 4-2 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Configuration
4.2 Assembly Options
4.2.1 General optional resistors
Note: All resistors are red marked in the following figures
Table 4-2 General optional resistors (default assembly in brackets)
Component Description
R202 Connect P20.2 (/TESTMODE) to GND (not assembled)
R203 XTAL1 Rload (50 Ohm) (not assembled)
R206 XTAL Rparallel (not assembled)
R207 XTAL2 Rserial (assembled)
R238 Switch off EVRC (not assembled)
R240 Switch off EVR33 (not assembled)
R390 Connect V_STBY to toggle LEDs D302...D305 (assembled)
R399 Connect V_UC to toggle LEDs D306...D309 (assembled)
R423 Connect P20.0 with miniWiggler JDS (not assembled)
R424 Connect P20.0 with OCDS1 connector (not assembled)
R425 Connect P21.7 with OCDS1 connector (not assembled)
R426 Connect P20.2 with OCDS1 connector (not assembled)
R427 Connect P21.7 with USR1 of miniWiggler JDS (not assembled)
R428 Connect P20.2 with USR1 of miniWiggler JDS (not assembled)
R429 Connect P21.6 (DAP3) with USR1 of DAP (assembled)
R430 Connect P20.2 with USR1 of DAP (not assembled)
R433 Connect P21.7 with ETK connector (not assembled)
R439 Connect P21.7 with ETK connector (not assembled)
R508 Connect pin MPS of TLF35584 to V_CO (not assembled)
R509 Connect pin MPS of TLF35584 to Ground (assembled)
R524 Connect VDDP3 to V_UC (not assembled)
R525 Connect VDDP3 to +3V3 (not assembled)
User Manual 4-3 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Configuration
Figure 4-2 Location of general optional resistors on Top Side
Figure 4-3 Location of general optional resistors on Bottom Side
U201
R395
X404
R212
S502
R222 CB205
R379
R372
C305
C310
X306
CB313
CB314
CB315
C311
U307
Y301
X604
R249
R246R245
R244
X402
S201
R377
R204R205
R215R214
X201
X305
X304
X303
R240
R236
R234
R232
R230
R223
R361
R359
R211
D301
CB206
C303
U408U407U406
R451
R455
R456
R454
R446
R444
CB419
CB418
CB417
CB416
CB415
CB414
D401
R430R429
R423
CB405
C402
R411
BU401
L401
D402
R401
CB401
U404
U401
Y401
CB408
R403
R402
CB402
R344
R524
R424
R425
R426
R427
R428 CB520
R201
CB204
R203
R202
C201
C202
R206
R207 Y201
R337
R357
R324
R399
R391 R392 R393 R394 R396 R397
CB309
R532
C301
C302
R439
R531
R335
R336
R355
R356
U305
T301
T302
X301
X302
X602X603
X601
D302
D303
D304
D305
D306
D307
D308
D309
D505
D506
D507D504
X401
X501
S501
R354
C519
R452
CB203
R213R216
R398
U502C505
D508
U501
L502
L501 CB501
C502
C507
C509
C508
C501
C503
C504
R501
R507
R508
R509
CB502
R 231
R233
R235
R237
R 241
R255
R256
R390
R375
R376
R348
R349
R525
S202
X502
R346
R 347
R457
X406
C522
CB316
CB317
U308
R248
X703
CB511
R388
R380
R378 Q301
R368
R371
R382
R419
R440
R369
R367
C320
C317
C316C315C314
C313
C312
Q403
R389
R383
R385
R370 CB311
CB312
C208
C207
C205
C204C203
R433
R523
R431
R381
R314
R252R250
R251R253
R254
CB202R208
R408
U306
R521
R238
R365R364
R363
R362
R360 CB310
C304
R449
R448R447
R445
R443
R413
U405
L402
CB4
13C403
D403
R404C401
R450
R442
R441
CB412
CB411
CB410
C405C404
R422
R421
U403
Q402
Q401
R412
C406
R420
R414
R418
R417 R416
R415
R410
R 409CB407
CB403
R407
U402
R406 R405
CB406
CB404
R305
R306
R308 R309
R315
R316
R318
R319
R522
R301
R311
R341
R340
R321
R322
R220R221
R533
R323
R343
CB301
CB302
CB512
CB513
CB515
CB5
16
CB517
CB518
CB5
19
R537
R307
R317
R538
R534
R513
R535
R536
C515
R511
R512
R510
Q502
Q504
Q503
X702
X704X701
U301
U302
R302
R342
CB303
CB304
CB305
CB306
CB307
CB308
R303
R304
R338
R330
R331
R358
R350
R351
U303
U304
R332
R334
R333
R352
R353
R320
CB201R209
CB510
R520
D503
R505
R504
C510
R502
R506
Q505 Q501
D501
C512
C511
D502
R503
R239
R312
R436
R437
R438
R313
R373
R374
Q506
L503
C520
C521
C506
CB506 U503
CB409R386
C306
User Manual 4-4 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Configuration
4.2.2 Resistors for peripherals
Table 4-3 Resistors for peripherals (default assembly in brackets)
Component Description
R220 Connect V_VR with VDDM (assembled)
R221 Connect +3V3 with VDDM (not assembled)
R222 Connect VAREF1 with VDDM (assembled)
R223 Connect VAREF2/AN43 with VDDM (assembled)
R301 Connect P20.7 with RXD of CAN0 transceiver (assembled)
R302 Connect P20.8 with TXD of CAN0 transceiver (assembled)
R303 Connect P14.1 with RXD of CAN0 transceiver (not assembled)
R304 Connect P14.0 with TXD of CAN0 transceiver (not assembled)
R311 Connect P13.1 with RXD of CAN1 transceiver (assembled)
R312 Connect P13.0 with TXD of CAN1 transceiver (assembled)
R313 Connect P00.1 with RXD of CAN1 transceiver (not assembled)
R314 Connect P00.0 with TXD of CAN1 transceiver (not assembled)
R320 Connect P02.0 with TXD of ERAY-A transceiver (assembled)
R321 Connect P02.4 with TXDEN of ERAY-A transceiver (assembled)
R322 Connect P02.1 with RXD of ERAY-A transceiver (assembled)
R323 Connect P10.1 with EN of ERAY-A transceiver (assembled)
R324 Connect P10.2 with ERRN of ERAY-A transceiver (assembled)
R340 Connect P02.2 with TXD of ERAY-B transceiver (assembled)
R341 Connect P02.5 with TXDEN of ERAY-B transceiver (assembled)
R342 Connect P02.3 with RXD of ERAY-B transceiver (assembled)
R343 Connect P20.10 with EN of ERAY-B transceiver (assembled)
R344 Connect P20.9 with ERRN of ERAY-B transceiver (assembled)
R348 Connect P15.4 with SCL of I2C Eeprom (assembled)
R349 Connect P15.5 with SDA of I2C Eeprom (assembled)
R364 Connect P15.1 with RXD of LIN1 transceiver (assembled)
R365 Connect P15.0 with TXD of LIN1 transceiver (assembled)
R368 Connect P11.9 with RXD1 of Ethernet PHY (assembled)
R369 Connect P11.10 with RXD0 of Ethernet PHY (assembled)
R370 Connect P11.11 with CRS_V of Ethernet PHY (assembled)
R371 Connect P11.12 with RXC and TXC of Ethernet PHY (assembled)
R372 Connect P11.6 with TXEN of Ethernet PHY (assembled)
R373 Connect P11.3 with TXD0 of Ethernet PHY (assembled)
R374 Connect P11.2 with TXD1 of Ethernet PHY (assembled)
R376 Disable outputs of MDIO/MDC transceiver (not assembled)
R377 Connect P10.3 with MDINT of Ethernet PHY (not assembled)
R436 Connect P14.0 with RXD of USB to UART (assembled)
User Manual 4-5 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Configuration
Note: All resistors are red marked in the following figures
Figure 4-4 Location of peripheral resistors on Top Side
R437 Connect P14.1 with TXD of USB to UART (assembled)
R438 Connect P15.2 with RXD of USB to UART (not assembled)
R440 Connect P15.3 with TXD of USB to UART (not assembled)
Table 4-3 Resistors for peripherals (default assembly in brackets) (continued)
Component Description
U201
R395
X404
R212
S502
R222 CB205
R379
R372
C305
C310
X306
CB313
CB314
CB315
C311
U307
Y301
X604
R249
R246R245
R244
X402
S201
R377
R204R205
R215R214
X201
X305
X304
X303
R240
R236
R234
R232
R230
R223
R361
R359
R211
D301
CB206
C303
U408U407U406
R451
R455
R456
R454
R446
R444
CB419
CB418
CB417
CB416
CB415
CB414
D401
R430R429
R423
CB405
C402
R411
BU401
L401
D402
R401
CB401
U404
U401
Y401
CB408
R403
R402
CB402
R344
R524
R424
R425
R426
R427
R428 CB520
R201
CB204
R203
R202
C201
C202
R206
R207 Y201
R337
R357
R324
R399
R391 R392 R393 R394 R396 R397
CB309
R532
C301
C302
R439
R531
R335
R336
R355
R356
U305
T301
T302
X301
X302
X602X603
X601
D302
D303
D304
D305
D306
D307
D308
D309
D505
D506
D507D504
X401
X501
S501
R354
C519
R452
CB203
R213R216
R398
U502C505
D508
U501
L502
L501 CB501
C502
C507
C509
C508
C501
C503
C504
R501
R507
R508
R509
CB502
R 231
R233
R235
R237
R 241
R255
R256
R390
R375
R376
R348
R349
R525
S202
X502
R346
R 347
R457
X406
C522
CB316
CB317
U308
R248
User Manual 4-6 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
TriBoard Configuration
Figure 4-5 Location of peripheral resistors on Bottom Side
X703
CB511
R388
R380
R378 Q301
R368
R371
R382
R419
R440
R369
R367
C320
C317
C316C315C314
C313
C312
Q403
R389
R383
R385
R370 CB311
CB312
C208
C207
C205
C204C203
R433
R523
R431
R381
R314
R252R250
R251R253
R254
CB202R208
R408
U306
R521
R238
R365R364
R363
R362
R360 CB310
C304
R449
R448R447
R445
R443
R413
U405
L402
CB4
13C403
D403
R404C401
R450
R442
R441
CB412
CB411
CB410
C405C404
R422
R421
U403
Q402
Q401
R412
C406
R420
R414
R418
R417 R416
R415
R410
R 409CB407
CB403
R407
U402
R406 R405
CB406
CB404
R305
R306
R308 R309
R315
R316
R318
R319
R522
R301
R311
R341
R340
R321
R322
R220R221
R533
R323
R343
CB301
CB302
CB512
CB513
CB515
CB5
16
CB517
CB518
CB5
19
R537
R307
R317
R538
R534
R513
R535
R536
C515
R511
R512
R510
Q502
Q504
Q503
X702
X704X701
U301
U302
R302
R342
CB303
CB304
CB305
CB306
CB307
CB308
R303
R304
R338
R330
R331
R358
R350
R351
U303
U304
R332
R334
R333
R352
R353
R320
CB201R209
CB510
R520
D503
R505
R504
C510
R502
R506
Q505 Q501
D501
C512
C511
D502
R503
R239
R312
R436
R437
R438
R313
R373
R374
Q506
L503
C520
C521
C506
CB506 U503
CB409R386
C306
User Manual 5-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Signal (on board used) Description
5 Signal (on board used) DescriptionFor more information about the signals please see the user manual/datasheet for TC3X4 and/or the schematicsof the board.All not mentioned signals are not used on the board and can be used outside. Optional marked signals are usedonly if they are connected (default is that they are not used on the board).
5.1 Power Signals
5.2 Reset Signals
Table 5-1 Power Signals
Short name Description
VCC_IN Supply Input (3,5V...40V)
VIN Input Voltage of Power Supply Device
GND Ground
V_PREPEG Pre Regulator Voltage (~5,8V)
V_UC Microcontroller Supply Voltage (5V or 3,3V depends on assembled TLF35584)
V_CO Communication Supply Voltage (5V)
V_VR Reference Supply Voltage (5V)
V_STBY Standby Supply Voltage (5V or 3,3V depends on assembled TLF35584)
VDD Core Supply Voltage (1,25V)
VDDSB Emulation Stand-by SRAM Supply Voltage (1,25V)
VDDP3 Flash Power Supply Voltage (3,3V)
VFLEX Flexport Supply Voltage (3,3V)
VEXTOSC Oscillator Port Supply Voltage (5V or 3,3V depends on assembled TLF35584)
VDDOSC Oscillator Core Supply Voltage (1,25V)
VSSOSC Oscillator Ground
VDDM ADC Analog Part Supply Voltage (5V or 3,3V selectable via 0R resistors)
VAREF1 ADC Reference Voltage 1 (VDDM)
VAREF2 ADC Reference Voltage 2 (VDDM)
VDD_USB Supply Voltage from USB (5V)
VDD_FT Supply Voltage FT2232HL device (3,3V)
Table 5-2 Reset Signals
Short name Description
/PORST Power On Reset
/DBG_PORST Power On Reset from debug connectors
/ESR0 External Service Request 0 (Hardware Reset)
/ESR1 External Service Request 1 (Non Maskable Interrupt)
User Manual 5-2 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Signal (on board used) Description
5.3 Config Signals
5.4 Clock Signals
5.5 Debug Signals
5.6 Peripheral Signals
Table 5-3 Config Signals
Short name Description
P14.5 HWCFG1 (EVR33OFF / EVR33ON)
P14.2 HWCFG2 (EVRCOFF / EVRCON)
P14.4 HWCFG6 (Pins in tristate / Pins with pull-up)
P14.3 HWCFG3 (Boot from pins / Boot from Flash BMI)
P10.5 HWCFG4 (see boot configuration Table 4-1)
P10.6 HWCFG5 (see boot configuration Table 4-1)
Table 5-4 Clock Signals
Short name Description
XTAL1 Crystal Oscillator Input
XTAL2 Crystal Oscillator Output
Table 5-5 Debug Signals
Short name Description
/TRST Test Reset
DAP0 Device Access Port Line 0 / Test Data Clock (TCK)
DAP1 Device Access Port Line 1 / Test Data Select (TMS)
DAP2 Device Access Port Line 2 / Test Data Output (TDO)
P21.6 Test Data Input (TDI)
DAP0_A DAP0 / TCK from debug connectors
DAP1_A DAP1 / TMS from debug connectors
P21.7 DAP2 / TDO from debug connectors / TriCore Breakpoint Input
P20.2 Test Mode Select Input
P20.0 TriCore Breakpoint Output
Table 5-6 Peripheral Signals
Short name Description
P14.1 ASCLIN0 Receive Input ACAN01 Receive Input B (optional)
P14.0 ASCLIN0 Transmit OutputCAN01 Transmit Output (optional)
P15.3 ASCLIN0 Receive Input B (optional)
User Manual 5-3 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Signal (on board used) Description
P15.1 ASCLIN1 Receive Input A
P15.0 ASCLIN1 Transmit Output
P15.4 I2C0 Serial Clock
P15.5 I2C0 Serial Data Input C und Output
P20.7 CAN00 Receive Input B
P20.8 CAN00 Transmit Output
P13.1 CAN10 Receive Input D
P13.0 CAN10 Transmit Output
P00.1 CAN10 Receive Input A (optional)
P00.0 CAN10 Transmit Output (optional)
P02.0 E-Ray Channel A Transmit Data Output
P02.4 E-Ray Channel A Transmit Data Output enable
P02.1 E-Ray Channel A Receive Data Input 2
P10.1 E-Ray Channel A Enable Output
P10.2 E-Ray Channel A Error Input
P02.2 E-Ray Channel B Transmit Data Output
P02.5 E-Ray Channel B Transmit Data Output enable
P02.3 E-Ray Channel B Receive Data Input 2
P20.10 E-Ray Channel B Enable Output
P20.9 E-Ray Channel B Error Input
P11.2 Ethernet TXD1 Output
P11.3 Ethernet TXD0 Output
P11.6 Ethernet TXEN Output
P11.9 Ethernet RXD1 Input A
P11.10 Ethernet RXD0 Input A
P11.11 Ethernet CRSDV Input A
P11.12 Ethernet REFCLK Input A
P02.8 Ethernet Management Data Clock Output (MDC)
P00.0 Ethernet Management Data Input/Output (MDIO)
P10.3 Ethernet MD Interrupt Input (optional)
P14.6 QSPI2 Slave Select Output 2 for SCS of TLF35584
P15.8 QSPI2 Master Clock Output for SCL of TLF35584
P15.6 QSPI2 Master Transmit Output for SDI of TLF35584
P15.2 QSPI2 Master Receive Input E for SDO from TLF35584ASCLIN0 Transmit Output (optional)
P02.7 Output for Watchdog Input of TLF35584
P33.8 SMU_FSP0 Output for Error Signal Input of TLF35584
P33.9 Input for Safe State Signal 1 from TLF35584
Table 5-6 Peripheral Signals (continued)
Short name Description
User Manual 5-4 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Signal (on board used) Description
P33.10 Output for Wake/Inhibit Input of TLF35584
P20.0 HSCT System Clock
P21.2 HSCT Data Negative Input
P21.3 HSCT Data Positive Input
P21.4 HSCT Data Negative Output
P21.5 HSCT Data Positive Output
P20[11...14] On board LED’s
P33[4...7] On board LED’s (standby voltage supplied)
Table 5-6 Peripheral Signals (continued)
Short name Description
User Manual 6-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Connector Pin Assignment
6 Connector Pin AssignmentThe TriBoard will be shipped with four male (plug) connectors on top layer and four female (socket) connectorson bottom layer. The default connectors are 80-pol. Board to Board connectors from Samtec:
http://www.samtec.com
Plug:FTSH-140-02-L-DV-ES-A
Socket:FLE-140-01-G-DV-A
6.1 On Board only used signalsFollowing port pins are only used on board and are not connected to any connector also not via resistor:
Table 6-1 On Board only used Signals
Short name Description
P32.0 Used as VGATE1N for EVRC
P32.1 Used as VGATE1P for EVRC
P14.2 Used as HWCFG2
P14.4 Used as HWCFG6
P14.5 Used as HWCFG1
User Manual 6-2 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Connector Pin Assignment
6.2 TC3X4 Connector / Top View
Figure 6-1 Connector for TC3X4 - Pinout (Part I, Top View)
GND 1 2 GND GND 1 2 GNDGND 3 4 GND GND 3 4 GND
5 6 P21.6 VCC_IN 5 6 VCC_IN7 8 P21.7 VCC_IN 7 8 VCC_IN9 10 9 10
11 12 11 1213 14 13 1415 16 /ESR1 15 16 /ESR017 18 17 1819 20 GND 19 20 GND21 22 21 22 /PORST23 24 P10.5 23 2425 26 25 2627 28 P10.2 27 28 P23.129 30 P13.1 29 30 P22.131 32 P13.0 31 32 P22.033 34 P13.3 33 34 P22.335 36 P13.2 35 36 P22.237 38 P20.9 37 38 P20.1039 40 P20.13 39 40 P00.441 42 P33.5 41 42 P20.643 44 P20.3 43 44 P20.245 46 P00.0 45 46 P00.347 48 P00.1 47 48 P00.249 50 P21.2 GND 49 50 GND51 52 P21.3 XTAL1 51 52 P32.453 54 P21.4 XTAL2 53 5455 56 P21.5 P15.3 55 56 P15.557 58 P15.2 57 58 P15.459 60 P14.1 59 60 P15.161 62 P14.0 61 62 P15.063 64 P20.11 63 64 P00.1265 66 P20.14 65 6667 68 P20.12 67 68 P00.569 70 P20.7 69 70 P20.871 72 P20.0 P15.8 71 7273 74 73 74 P10.375 76 VDDSB 75 76 GND77 78 VEXT 77 78 +3V379 80 VEXT 79 80 +3V3
BUS EXPANSION (X601,X701) PERIPHERALS (X602,X702)
User Manual 6-3 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Connector Pin Assignment
Figure 6-2 Connector for TC3X4 - Pinout (Part II, Top View)
GND 1 2 GND GND 1 2 GNDGND 3 4 GND GND 3 4 GNDAN0 5 6 AN16 P00.9 5 6AN1 7 8 AN17 7 8AN2 9 10 P02.0 9 10AN3 11 12 P02.1 11 12AN4 13 14 AN20 P02.2 13 14AN5 15 16 AN21 P02.3 15 16 P14.6AN6 17 18 P02.4 17 18AN7 19 20 P02.5 19 20AN8 21 22 AN24 21 22
23 24 AN25 23 24AN10 25 26 25 26 P15.6AN11 27 28 27 28 P15.7AN12 29 30 29 30AN13 31 32 31 32
33 34 P10.1 33 3435 36 P10.6 35 36
GND 37 38 GND 37 38VDDM 39 40 VAREF1 39 40GND 41 42 VAREF2 / AN43 41 42GND 43 44 GND 43 44
45 46 P11.2 45 4647 48 P11.3 47 4849 50 49 50
AN35 51 52 51 52AN36 53 54 AN44 P11.6 53 54AN37 55 56 AN45 55 56 P33.8AN38 57 58 AN46 57 58 P33.9AN39 59 60 AN47 P11.9 59 60 P33.10GND 61 62 GND P11.10 61 62 P33.13
63 64 P33.6 P11.11 63 6465 66 P11.12 65 6667 68 P33.4 67 68
VEXT 69 70 +3V3 69 70P02.6 71 72 P00.6 71 72P02.7 73 74 P00.7 73 74P02.8 75 76 P00.8 VFLEX 75 76P33.7 77 78 P14.3 VEXT 77 78 +3V3P33.11 79 80 P33.12 VEXT 79 80 +3V3
ADC (X603, X703) GTM / PORTS (X604,X704)
User Manual 6-4 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Connector Pin Assignment
6.3 Power connector pinout
Figure 6-3 Power connector pinout (Roka 520 2550
6.4 USB connector pinout
Figure 6-4 USB connector pinout (Micro USB B-type)
6.5 FlexRay™ (ERAY) connector pinout
Figure 6-5 FlexRay™ (ERAY) connector pinout (IDC10)
6.6 CAN connector pinout
Figure 6-6 CAN connector pinout (IDC10)
+3,5V...40V
GND
D+
D-
VC
C
GN
DID
2 4 6 8
GN
D
BP BM
1 3 5 7 9
10
2 4 6 8
GN
D
CA
NH
CAN
L
1 3 5 7 9
10
GN
D
User Manual 6-5 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Connector Pin Assignment
6.7 LIN connector pinout
Figure 6-7 LIN connector pinout (IDC10)
6.8 HSCT connector pinout
Figure 6-8 HSCT connector pinout (IEE1394 6-conductor)
6.9 Ethernet connector pinout
Figure 6-9 Ethernet connector pinout (RJ45)
2 4 6 8
GN
D
BUS
VIN
opt
1 3 5 7 9
10
GN
D
3
62
TXD
_P
RXD
_P
1 5
4
GN
D
GN
D
TXD
_N
RXD
_N
SYSC
LKJ2J1 J3 J4 J5 J6 J7 J8
User Manual 6-6 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Connector Pin Assignment
6.10 OCDS1 connector pinout
Figure 6-10 OCDS1 connector pinout (IDC16)
6.11 DAP connector pinout
Figure 6-11 DAP connector pinout (Samtec FTSH10)
TDO
2 4 6 8
1 3 5 7 9
10 12 14 16
11 13 15
TDI
/TR
ST
TCK
/BR
KIN
TMS
GN
D
GN
D
/PO
RST
/BR
KOU
T
GN
D
V_U
C
DA
P0
2 4 6 8
1 3 5 7 9
10
US
R1_
IO
/PO
RS
T
US
R0_
IO
DA
P1
GN
D
GN
D
Key
GN
D
V_U
C
User Manual 6-7 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Connector Pin Assignment
6.12 ETK connector pinout
Figure 6-12 ETK connector pinout (Samtec TFM-105)
6.13 Ethernet miniWiggler power connector pinout
Figure 6-13 Ethernet miniWiggler connector pinout (JST B4B-PH)
TDO
/ D
AP2
2 4 6 8
1 3 5 7 9
10
V_U
C
/PO
RST
TDI
TCK
/ D
AP0
/TR
ST
TMS
/ DA
P1
BRK
IO
/ES
R0
GN
D
2 41 3
WAK
EUP
VD
DSB
VCC
_IN
GN
D
User Manual 7-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Schematic and Layout
7 Schematic and Layout
7.1 Known problems
7.1.1 Known problems on TriBoard TC3X4L TH V1.0No problems known.
7.1.2 Known problems on TriBoard TC3X4L V1.0No problems known.
7.2 Schematic
User Manual 7-2 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Schematic and Layout
Figure 7-1 Schematic - Project
11
22
33
44
55
66
77
88
DD
CC
BB
AA
1In
fineo
n Te
chno
logi
es A
GA
TV M
C A
CE
ATV
CES
Am
Cam
peon
1-1
2D
-855
79 N
eubi
berg
Tel.:
+49
-89-
234-
0
7
15.1
0.20
18
Num
ber:
Dat
e:
Shee
t:of
Tri
Boa
rd T
C3X
4L P
roje
ct
1.0
Rev
isio
n:
G:\T
echn
ical
_Sup
port
\Tri
Core
\Tri
Boar
d\ED
A_D
XP\T
riBo
ard
AURI
X 2G
\Tri
Boar
d TC
3X4L
\Tri
Boar
d TC
3X4L
V1.
X\Tr
iBoa
rd_T
C3X
4L_V
10.p
rjFi
le:
XTA
L[1.
.2]
DEB
UG
..
POR
T[00
..33]
AN
[0..4
7]
Clo
ck, C
onfig
, Deb
ug, P
orts
and
AD
CC
lk_C
fg_D
bg_P
orts
_Adc
.sch
POR
T[00
..33]
/ESR
0
On
Boa
rd P
erip
hera
lsPe
riphe
rals
.sch
DEB
UG
..
POR
T[00
..33]
/ESR
0
/PO
RST
min
iWig
gler
and
Deb
ug C
onne
ctor
sw
iggl
er_D
bg_c
on.sc
h
/PO
RST
/ESR
0
/ESR
1
POR
T[00
..33]
Pow
er S
uppl
ySu
pply
.sch
XTA
L[1.
.2]
POR
T[00
..33]
AN
[0..4
7]
/PO
RST
/ESR
0
/ESR
1
NC
1[5.
.80]
NC
2[5.
.80]
NC
4[5.
.80]
NC
3[5.
.80]
Con
nect
or P
lug
Con
nect
m.sc
h
XTA
L[1.
.2]
POR
T[00
..33]
AN
[0..4
7]
/PO
RST
/ESR
0
/ESR
1
NC
1[5.
.80]
NC
2[5.
.80]
NC
4[5.
.80]
NC
3[5.
.80]Con
nect
or S
ocke
tC
onne
ctf.s
ch
NC4[5..80]
NC3[5..80]
NC2[5..80]
PORT[00..33]
AN
[0..4
7]
XTA
L[1.
.2]
/ESR
0
/PO
RST
/ESR
1
DEB
UG
..
NC1[5..80]
User Manual 7-3 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Schematic and Layout
Figure 7-2 Schematic - Clock, Config, Debug, Ports and ADC
11
22
33
44
55
66
77
88
DD
CC
BB
AA
2In
fineo
n Te
chno
logi
es A
GA
TV M
C A
CE
ATV
CES
Am
Cam
peon
1-1
2D
-855
79 N
eubi
berg
Tel.:
+49
-89-
234-
0
7
15.1
0.20
18
Num
ber:
Dat
e:
Shee
t:of
Tri
Boa
rd T
C3X
4L C
lock
, Con
fig, D
ebug
, Por
ts, A
DC
1.0
Rev
isio
n:
G:\T
echn
ical
_Sup
port
\Tri
Core
\Tri
Boar
d\ED
A_D
XP\T
riBo
ard
AURI
X 2G
\Tri
Boar
d TC
3X4L
\Tri
Boar
d TC
3X4L
V1.
X\Cl
k_C
fg_D
bg_P
orts
_Adc
.sch
File
:
P21.6
POR
T[00
..33]
CLO
CK
& T
ESTM
OD
E
JTA
G /
DA
P / O
CD
S1
XTA
L181
XTA
L282
VSS
(OSC
)80
P20.
2 / T
ESTM
OD
E94
VEX
T(O
SC)
83
VD
D(O
SC)
79
TRST
91
TCK
/ D
AP0
92
P21.
6 / T
DI
88TM
S / D
AP1
89
P21.
7 / T
DO
/ D
AP2
90
U20
1B
TC3X
4_LQ
FP
P15.
5 / S
DA
011
4
P20.
1010
4
P20.
1410
8
P11.
6 / T
XEN
134
P11.
9 / R
XD
1A13
5
P11.
3 / T
XD
013
3
P14.
1 / A
RX
0A11
9P1
4.0
/ ATX
011
8
P15.
1 / A
RX
1A11
0P1
5.0
/ ATX
110
9
P20.
1110
5
P20.
1210
6
P20.
1310
7
P20.
8 / C
AN
00_T
XD
102
P20.
9 / R
EQ7_
010
3
VFL
EX13
6
P11.
12 /
REF
CLK
A13
9
P11.
10 /
RX
D0A
137
P11.
2 / T
XD
113
2
P15.
4 / S
CL
113
P33.
561
P20.
7 / C
AN
00_R
XD
B10
1
P11.
11 /
RX
DV
A13
8
ON
BO
AR
D U
SED
PER
IPH
ERA
LS /
PIN
S
P15.
6 / M
TSR
211
5
P33.
763
P33.
460
P33.
662
ASC
LIN
CA
N
QSP
I / T
LF35
584
ERA
Y
I2C LE
Ds
P14.
4 / H
WC
FG6
122
P14.
2 / H
WC
FG2
120
P33.
8 / S
MU
_FSP
064
P33.
965
P21.
3 / R
XD
0P85
P21.
4 / T
XD
0N86
P21.
5 / T
XD
0P87
P14.
3 / H
WC
FG3
121
P10.
5 / H
WC
FG4
143
P10.
6 / H
WC
FG5
144
P20.
0 / S
YSC
LK93
P21.
2 / R
XD
0N84
HSC
TH
WC
FG
P33.
1066
P33.
1167
ETH
ERN
ET
BU
TTO
N
P02.
0 / T
XD
0A1
P02.
1 / R
XD
0A2
P02.
2 / T
XD
0B3
P02.
3 / R
XD
0B4
P02.
4 / T
XEN
0A5
P02.
5 / T
XEN
0B6
P13.
1 / C
AN
10_R
XD
D12
9P1
3.0
/ CA
N10
_TX
D12
8
P15.
8 / S
CLK
211
7
P14.
5 / H
WC
FG1
123
P10.
2 / R
EQ2_
014
1
P10.
114
0
P14.
6 / S
LSO
2212
4
P15.
2 / M
RST
2E11
1
P10.
3 / R
EQ3_
014
2
P00.
0 / M
DIO
A11
P02.
8 / M
DC
9
P02.
78
U20
1C
TC3X
4_LQ
FP
POR
T[00
..33]
P20.2
P21.
7
GN
D
R20
6op
t
XTA
L[1.
.2]
XTA
L1
XTA
L2
R20
3
50R
_opt
VSS
OSC
DEB
UG
..
R20
7
0R
C20
210
pFC
201
10pF
VSS
OSC
VSS
OSC
1 2
Y20
120
MH
z
R20
110
K
V_U
C
P20.
2R
202
opt
GN
D
XTA
L[1.
.2]
R20
4
0R R20
5
0R
R21
6
0R
DAP2
R20
9
0RC
B20
133
0nR
208
0RC
B20
233
0n
VD
D
VSS
OSC
V_U
C
VSS
OSC
VD
DO
SC
VEX
TOSC
AN
[0..4
7]
V_V
R
CB
204
470n
GN
D
VD
DM
+3V
3
FOR
5V
AD
C
FOR
3,3
V A
DC
AN
0 / E
DS3
PA57
AN
1 / E
DS3
NA
56
AN
2 / E
DS0
PA55
AN
3 / E
DS0
NA
54
EVA
DC
/ ED
SAD
C
AN
453
AN
552
AN
651
AN
3534
AN
750
AN
849
AN
1048
AN
1147
AN
12 /
EDS0
PB46
AN
13 /
EDS0
NB
45
AN
1640
AN
17 /
P40.
1039
AN
20 /
EDS2
PA38
AN
21 /
EDS2
NA
37
AN
24 /
EDS2
PB /
P40.
036
AN
25 /
EDS2
NB
/ P4
0.1
35
AN
44 /
EDS1
PC29
AN
45 /
EDS1
NC
28
AN
46 /
EDS1
PD27
AN
47 /
EDS1
ND
26
VA
GN
D1
41
VA
REF
142
VD
DM
44
VSS
M43
AN
36 /
EDS1
PA /
P40.
633
AN
37 /
EDS1
NA
/ P4
0.7
32
AN
38 /
EDS1
PB /
P40.
831
AN
39 /
EDS1
NB
/ P4
0.9
30
VA
GN
D2
/ AN
4225
VA
REF
2 / A
N43
24
U20
1E
TC3X
4_LQ
FP
R22
2
6R8
CB
205
2,2μ
F
GN
D
VA
REF
1V
DD
M
R22
3
6R8
CB
206
2,2μ
F
GN
D
VA
REF
2V
DD
M
R22
0
1R2
R22
1
1R2_
opt
POR
TS
P13.
313
1P1
3.2
130
P32.
472
P00.
1221
P00.
920
P00.
415
P00.
516
P00.
314
P00.
213
P00.
112
P20.
395
P20.
610
0
P00.
819
P00.
718
P00.
617
P02.
67
P33.
1268
P33.
1369
P22.
377
P22.
276
P15.
311
2
P22.
074
P22.
175
P15.
711
6
P23.
173
U20
1D
TC3X
4_LQ
FP
P00.
1P0
0.2
P00.
3P0
0.4
P00.
5P0
0.6
P00.
7P0
0.8
P00.
9
P00.
12
GN
D
Switc
h O
N m
eans
the
corr
espo
ndin
g si
gnal
is lo
w.
Switc
h O
FF m
eans
the
corr
espo
ndin
g si
gnal
is h
igh.
R23
0
1K5
R23
2
1K5
R23
4
1K5
R23
6
1K5
R24
0
1K5_
opt
R23
8
1K5_
opt
P14.
5
P14.
2
P14.
4
P10.
5
P10.
6
P14.
3H
WC
FG3
HW
CFG
4
HW
CFG
5
HW
CFG
6
(abo
ut c
onfig
urat
ion
see
the
man
ual o
f ass
embl
ed d
evic
e)
GN
D
1 2 3 4
8 7 6 5
1S201
DIP
SW-4
R23
147
K
R23
347
K
R23
547
K
R23
747
K
R23
947
K
R24
147
K
V_U
C
V_U
C
V_U
C
V_U
C
V_U
C
V_U
C
NO
TE
: S2
01 is
for
devi
ce c
onfig
urat
ion
S202
P33.
11
R25
6
1K5
R25
547
K
V_S
TBY
GN
D
DAP2
/TR
STD
AP0
DA
P1
DEB
UG
..
R21
2 33R
R21
40R R
215
0RDA
P0
DA
P0_A
DA
P1
DA
P1_A
R21
3
33R
P13.
1
P15.
1
P14.
1
P14.
6
P10.
2
P13.
0
P15.
4
P14.
0
P15.
0
P02.
7
P02.
2P2
0.9
P20.
10
SYSC
LK
P33.
8
P02.
3
P20.
7P2
0.8
P15.
2
P15.
5
P02.
5
P33.
10
VFL
EXR
211
0R
+3V
3
CB
203
100n
P02.
1
P10.
1
RX
D0_
PR
XD
0_N
P15.
8
TXD
0_P
TXD
0_N
P15.
6
P33.
9
P02.
4P0
2.0
SYSC
LK1
TXD
P3
GN
D2
TXD
N4
S
RX
DP
5
RX
DN
6
X20
1
HSC
T0-o
pt
GN
D
R25
4
0RR25
3
0R R25
0
0R R25
1
0RR25
2
0R
P21.
2
P21.
5
P21.
4
P20.
0
P21.
3
P33.11
C20
747
nF
GN
D
AN
44
C20
847
nF
GN
D
AN
45
GN
D
AN
7
C20
347
nF
C20
447
nF
GN
D
AN
20
C20
547
nF
GN
D
AN
21
R24
9
4K7
R24
8
4K7
R24
4
4K7
R24
5
4K7
R24
6
4K7
GN
DP33.
6
P33.
4P3
3.5
P33.
7
P11.
3P1
1.2
P11.
6
P02.
6P2
3.1
P15.
3
AN[0..47]
AN
0A
N1
AN
2A
N3
AN
4A
N5
AN
6
AN
8A
N7_
I
AN
10A
N11
AN
12A
N13
AN
16A
N17
AN
20_I
AN
21_I
AN
24A
N25 AN
46A
N47
AN
44_I
AN
45_I
AN
35A
N36
AN
37A
N38
AN
39
P10.
5P1
0.6
P14.
4
P14.
3
P33.
11
P20.
12
P20.
14
P20.
11
P20.
13
P11.
12P1
1.10
P11.
9P1
1.11
P14.
2P1
4.5
P02.
8P0
0.0
P10.
3
P33.
12P3
3.13
P32.
4
P15.
7
P20.
3
P20.
6
P22.
0P2
2.1
P22.
3P2
2.2
P13.
2P1
3.3
User Manual 7-4 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Schematic and Layout
Figure 7-3 Schematic - On Board Peripherals
11
22
33
44
55
66
77
88
DD
CC
BB
AA
3In
fineo
n Te
chno
logi
es A
GA
TV M
C A
CE
ATV
CES
Am
Cam
peon
1-1
2D
-855
79 N
eubi
berg
Tel.:
+49
-89-
234-
0
7
15.1
0.20
18
Num
ber:
Dat
e:
Shee
t:of
Tri
Boa
rd T
C3X
4L O
n B
oard
Per
iphe
rals
1.0
Rev
isio
n:
G:\T
echn
ical
_Sup
port
\Tri
Core
\Tri
Boar
d\ED
A_D
XP\T
riBo
ard
AURI
X 2G
\Tri
Boar
d TC
3X4L
\Tri
Boar
d TC
3X4L
V1.
X\Pe
riph
eral
s.sch
File
:
V_C
O
R30
5
0R
GN
D
R30
712
0R
R30
8
0R R30
9
0RG
ND
2
RX
D4
CA
NH
7
TXD
1
VC
C3
CA
NL
6
STB
8
VIO
5U
301
TLE9
251V
SJ
R30
60R
V_U
C
V_C
O
R31
5
0R
GN
D
R31
712
0R
R31
8
0R R31
9
0RG
ND
2
RX
D4
CA
NH
7
TXD
1
VC
C3
CA
NL
6
STB
8
VIO
5U
302
TLE9
251V
SJ
R31
60R
V_U
C
R30
1
0R
P00.
0
P00.
1
1 3 5 7 9
2 4 6 8 10
X30
1
CA
N0
1 3 5 7 9
2 4 6 8 10
X30
2
CA
N1
GN
D
GN
D
POR
T[00
..33]
CB303100n
CB304100n
CB305100n
GN
DG
ND
GN
D
VIN
V_C
OV
_UC
BPA
BM
A
CB306100n
CB307100n
CB308100n
GN
DG
ND
GN
D
VIN
V_C
OV
_UC
BPB
BM
B
ERR
NA
ERR
NB
R35
0
4K7
R35
1
4K7
V_U
C
R33
0
4K7
R33
1
4K7
V_U
C
GN
D
GN
D
12 3
4
T301
B82
789-
C01
04
C30
110
nF
GN
DR33
70R
R33
551
RR
336
51R
C30
210
nF
GN
DR35
70R
R35
551
RR
356
51R
R33
3op
t
R33
84K
7
V_U
C R35
84K
7
V_U
CENA
ENB
TXD
ATX
ENA
RX
DA
TXD
BTX
ENB
RX
DB
BG
EA
BG
EB
R33
4op
t
R33
2op
t
GN
D
R35
3op
tR
354
opt
R35
2op
t
GN
D
R32
3
0R R34
3
0R
CB
301
100n
GN
D
CB
302
100n
GN
D
V_U
C
GN
DCB
309
100n
P15.
4
P15.
5
R34
2
0RR34
1
0RR34
0
0R R34
4
0RR32
4
0RR32
1
0R
P20.
9
R32
0
0R
P10.
2
R32
2
0R
POR
T[00
..33]
SDA
3
VC
C4
SCL
1
VSS
2
U30
5
24A
A02
E48-
E/O
T
P10.
1
P20.
10
P02.
4
P02.
5
P02.
1
P02.
0
P02.
3
P02.
2
1 3 5 7 9
2 4 6 8 10
X30
3
ERA
Y-A
1 3 5 7 9
2 4 6 8 10
X30
4
ERA
Y-B
GN
D
R36
2
0R
R36
01K
CB
310
100n
GN
D
C30
322μF
/50V
GN
D
P15.
0
P15.
1
R36
5
0RR36
4
0RR36
3
10K
V_U
C
13
2
D30
1
BA
T54-
04
1 3 5 7 9
2 4 6 8 10
X30
5
LIN
1
R36
1
10K
VIN
R35
9
0R_o
pt
GN
D
GN
D
V_U
C
VIN
VIN
EN2
INH
8
BU
S6
TXD
4
WK
3
RX
D1
VS
7G
ND
5U
306
TLE7
259-
3GE
C30
41n
GN
D
P20.
7
P20.
8
12 3
4
T302
B82
789-
C01
04
TXD
4
BG
E7
TXD
EN5
RX
D6
EN2
STB
N8
RX
EN9
ERR
N10
GN
D13
INH
1
WA
KE
12
BP
15
BM
14
VB
AT
11
VD
D16
VIO
3
U30
3
TLE9
221S
X
GN
D
INH
A
GN
DG
ND
TXD
4
BG
E7
TXD
EN5
RX
D6
EN2
STB
N8
RX
EN9
ERR
N10
GN
D13
INH
1
WA
KE
12
BP
15
BM
14
VB
AT
11
VD
D16
VIO
3
U30
4
TLE9
221S
X
GN
D
INH
B
GN
DG
ND
R31
1
0RR
312
0R
P13.
1
P13.
0
R31
3
0R_o
ptR
314
0R_o
pt
R30
2
0RR
303
0R_o
ptR
304
0R_o
ptP1
4.0
P14.
1V
_UC
R39
847
0R
D309
LBT673
D308
LBT673
P33.4R
390
0R
R39
747
0R
P33.5
R39
647
0R
P33.6
R39
547
0R
P33.7 R39
447
0R
P20.11
R39
347
0R
P20.12
R39
247
0R
P20.13
R39
147
0R
P20.14
D307
LBT673
D306
LBT673
D305
LBT673
D304
LBT673
D303
LBT673
D302
LBT673
V_S
TBY
R39
9
0R
R34
8
0R R34
9
0R
R34
62K
R34
72K
V_U
CV
_UC
TD+
1
CT
4
RD
+3
TD-
2
CT
5
RD
-6
GN
D8
LK10
LA9
RA
12R
K11
SHIE
LDS
X30
6
RJ4
5
/ESR
0
C31
0 27pF
C31
1 27pF
GN
D
GN
D
1 3
Y30
1
NX
3225
SA-2
5MH
z+3
V3
RST
N
2
6 1
Q30
1AB
SD23
5N
5
3 4
Q30
1BB
SD23
5N
GN
D
GN
D
R38
1
10K
R38
010
K
R37
5
10K
R37
6
opt
P02.
8P0
0.0
R38
22K
49/1
%
GN
DG
ND
C30
5
22μF
GN
D
CB
311
100n
GN
D
+3V
3
LED
0 / P
HY
AD
[0] /
PM
EB24
LED
1 / P
HY
AD
[1]
25
CK
XTA
L131
CK
XTA
L232
EPA
DH
S
MD
I-[0
]4
MD
I+[0
]3
MDIO23
MDC22
TXC15
PHY
RST
B21
RSE
T1
RTL
8201
FI
TXD[0]16
TXD[1]17
TXD[2]18
TXD[3]19
RXD[0]9 RXD[1]10 RXD[2]/INTB11 RXD[3]/CLK_CTL12
TXEN20
RXC13
MD
I-[1
]6
MD
I+[1
]5
AVDD10OUT 2
AVDD33 7
DVDD10OUT 29
DVDD33 14
AVDD33 30
COL27
CRS/CRS_DV26
RXDV8
RXER/FXEN28
U30
7R
TL82
01FI
-VC
-CG
GN
DR
388
510R
C31
7 10n
Shie
ld
GN
D
GN
D
+3V
3
GN
D
C31
3
100n
C31
4
10n
C31
5
10n
C31
6
100n
C31
2
1000
pF/2
KV
+3V
3R
385
4K7
R38
9
510R
R38
34K
7/E
SR0
CB
312
100n
CB
313
100n
CB
314
100n
R37
84K
7R
377
330R
_opt
P10.
3
+3V
3
R37
91K
8
+3V
3
C320opt
P11.
2
P11.
3
R38
6 4K7
CB
315
100n
GN
D
MD
I0_P
MD
I0_N
MD
I1_P
MD
I1_N
P11.
6
R37
4
0R
R37
3
0R
R37
2
0R
R37
1
0R
GN
D
R37
0
0R
R36
9
0R
R36
8
0R
P11.
11
P11.
10
P11.
9
P11.
12
R36
7
4K7
+3V
3O
E6
VC
CA
3V
CC
B7
A1
5
GN
D2
B1
8A
24
B2
1
U30
8
TXS0
102D
CU
T
GN
D
+3V
3C
B31
6
100n
CB
317
100n
V_U
C
GN
D+3
V3
GN
D
Shie
ld
C30
6 10n
GN
D
User Manual 7-5 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Schematic and Layout
Figure 7-4 Schematic - miniWiggler JDS and Debug connectors
11
22
33
44
55
66
77
88
DD
CC
BB
AA
4In
fineo
n Te
chno
logi
es A
GA
TV M
C A
CE
ATV
CES
Am
Cam
peon
1-1
2D
-855
79 N
eubi
berg
Tel.:
+49
-89-
234-
0
8
15.1
0.20
18
Num
ber:
Dat
e:
Shee
t:of
Tri
Boa
rd T
C3X
4L m
iniW
iggl
er a
nd D
ebug
con
nect
ors
1.0
Rev
isio
n:
G:\T
echn
ical
_Sup
port
\Tri
Core
\Tri
Boar
d\ED
A_D
XP\T
riBo
ard
AURI
X 2G
\Tri
Boar
d TC
3X4L
\Tri
Boar
d TC
3X4L
V1.
X\W
iggl
er_D
bg_c
on.sc
hFi
le:
TMS
1
TDO
3
CPU
CLO
CK
5
TDI
7
TRST
9
TCK
11
BR
KIN
13
N.C
.15
VC
C2
GN
D4
GN
D6
POR
ST8
BR
KO
UT
10
GN
D12
OC
DSE
14
KEY
16
X40
1
OC
DS1
V_U
C
GN
D
DA
P0_A
DA
P1_A
/BR
KO
UT
/TR
ST
GN
D
/DB
G_P
OR
ST
R42
40R
_opt
R42
60R
_opt
R42
50R
_opt
VR
EF1
GN
D3
GN
D5
KEY
7
GN
D9
DA
P12
DA
P04
USE
R1
8U
SER
06
RES
ET10
X40
2
DA
P
DEB
UG
..
/BR
KIN
R42
8
0R_o
pt
R42
7
0R_o
pt
P20.0
POR
T[00
..33]
/PO
RST
POR
T[00
..33]
DEB
UG
..
EEC
S63
EEC
LK62
EED
ATA
61
TEST
13
SUSP
END
36
OSC
I2
DM
7
GND 1
VR
EGO
UT
49
RES
ET14
AGND 10
OSC
O3
DP
8
REF
6
GND 5
VR
EGIN
50
GND 11
VCCIO20
GND 15
VCCIO31
AD
BU
S016
AD
BU
S117
AD
BU
S218
AD
BU
S319
AD
BU
S421
AD
BU
S522
AD
BU
S623
AD
BU
S724
AC
BU
S026
AC
BU
S127
AC
BU
S228
BD
BU
S038
BC
BU
S048
BD
BU
S139
BC
BU
S152
BD
BU
S240
BC
BU
S253
BD
BU
S341
BD
BU
S443
BD
BU
S544
BD
BU
S645
BD
BU
S746
AC
BU
S329
AC
BU
S430
AC
BU
S532
AC
BU
S633
AC
BU
S734
BC
BU
S354
BC
BU
S455
BC
BU
S557
BC
BU
S658
BC
BU
S759
GND 25
GND 35
GND 47
GND 51
PWR
EN60
VCORE64
VCORE12
VCORE37
VCCIO42
VCCIO56
VPLL9
VPHY4
U40
1
FT22
32H
L
VB
US
1
D+
3D
-2
ID4
GN
D5
BU
401
Mic
ro U
SB
GN
D
R40
2
27R
R40
3
27R
R40
4
12K
/1%
C40
6
3,3u
F
VD
D_F
T
L401
MM
Z160
8R30
0A
CB
401
100n
GN
D
R40
1
1K
CB
403
100n
CB
402
100n
CB
404
100n
C40
110μ/
6V
GN
D
VD
D_F
T
R40
5
10K
R40
7
opt
R40
6
2K2
CB
406
100n
R45
0
1K_o
pt
CB
407
100n
GN
D
V_U
C
AD
BU
S0A
DB
US1
AD
BU
S2A
DB
US3
AD
BU
S4A
DB
US5
AD
BU
S6A
DB
US7
AC
BU
S0A
CB
US1
AC
BU
S2A
CB
US3
R40
910
K
V_U
C
TMS
/TR
ST_J
DA
P0_A
USR
0
/RES
ET
D40
1LB
T67
3
R41
110
0R
VD
D_F
T
/PO
RST
AD
BU
S0A
DB
US1
AD
BU
S2
AD
BU
S3
AD
BU
S4 AD
BU
S6A
CB
US0
AC
BU
S1
AC
BU
S5
AC
BU
S6
BD
BU
S0B
DB
US1
13
D40
3
BA
T54
USR
8
GN
D
R42
04K
7
V_U
C
DA
P1_A
TDI
/TR
ST
DA
P0_A
DA
P1_A
P15.3
P15.2
BD
BU
S0
BD
BU
S1
CB
409
100n
R41
268
0RD40
2LP
T67
K
VD
D_F
T
R41
4
4K7
R41
610
K
R41
8
10K
R41
710
K R41
9
10K
VD
D_F
TV
_UC
VD
D_F
TV
_UC
R41
510
K
V_U
C
R41
010
K
VD
D_F
T
R42
1op
tR
422
opt
GN
DG
ND
R44
00R
_opt
GN
D
GN
D
1 3
Y40
1N
X32
25SA
-12M
Hz
C40
4 8pF
C40
5 8pF
VD
D_F
T
GN
D
GN
D
R44
1
10K
VD
D_F
T
GN
D
VD
D_F
T
VD
D_F
T
R44
2
10K
OU
T3
GND 2
IN1
U40
5TL
E427
4GSV
33
GN
D
GN
D
CB
411
100n
CB
410
100n
CB
412
100n
GN
D
GN
D
C40
24u
7/6V
GN
D
CB
405
100n
VD
D_F
T
GN
D
L402
MM
Z160
8R30
0AC
403
4u7/
6V
GN
D
CB
413
100n
GN
D
GN
D
VD
D_F
T
VD
D_F
T
+1V
8
/OE
1V
CC
5
A2
GN
D3
Y4
U40
4
SN74
LVC
1G12
5
CB
408
100n
VD
D_F
T
GN
D
R44
310
K
VD
D_F
T
CB
415
100n
CB
414
100n
GN
D
VD
D_F
TV
_UC
GN
DR
444
4K7
GN
D
AD
BU
S2
AC
BU
S3
DIR
5
VC
CA
1V
CC
B6
A3
GN
D2
B4
U40
6
SN74
LVC
1T45
DB
V
DIR
5
VC
CA
1V
CC
B6
A3
GN
D2
B4
U40
7
SN74
LVC
1T45
DB
V
CB
417
100n
CB
416
100nV
DD
_FT
V_U
C
GN
DR
445
4K7
GN
DGN
D
AC
BU
S2
AC
BU
S5
GN
D
USR
1
DIR
5
VC
CA
1V
CC
B6
A3
GN
D2
B4
U40
8
SN74
LVC
1T45
DB
V
CB
419
100n
CB
418
100nV
DD
_FT
V_U
C
GN
D
GN
D
R44
64K
7
GN
DGN
D
AD
BU
S1
AC
BU
S5
AC
BU
S5A
CB
US4
P21.
7
P21.7P21.6
P21.
6
AC
BU
S7
AC
BU
S7A
CB
US6
AC
BU
S6
AC
BU
S7A
CB
US3
AC
BU
S2
R41
3
10K
R44
70R
_opt
R44
80R
_opt
R44
90R
_opt
AC
BU
S4
R45
4
5K1
DA
P1_A
OR
G6
DN
C7
VC
C8
CS
1
GN
D5
Q4
CLK
2
D3
U40
2
93LC
46B
-I/S
N
G1
1A1
21Y
118
1A2
41Y
216
1A3
61Y
314
1A4
81Y
412
VC
C20
GN
D10
2Y1
9
2Y2
7
2Y3
5
2Y4
3
G19
2A1
11
2A2
13
2A3
15
2A4
17
U40
3
SN74
AH
C24
4PW
R45
6
0R
P20.
0
R45
5
0R
P21.
7R
451
0R_o
pt
R42
3
0R_o
pt
FOR
USI
NG
WIG
GL
ER
WIT
H J
TA
G:
Ass
embl
e R
447-
R45
1R
emov
e R
455-
R45
6
P21.
6
P21.
7
P20.
0
P21.
7
2
61
Q40
1AB
SD23
5N
5
34
Q40
1BB
SD23
5N
2
61
Q40
2AB
SD23
5N
5
34
Q40
2BB
SD23
5N
2
61
Q40
3AB
SD23
5N
5
34
Q40
3BB
SD23
5N
VD
D_U
SB
R43
110
0K
V_U
C
/DB
G_P
OR
ST
GN
D1
TCK
/ D
AP0
2
/TR
ST3
TDO
/ D
AP2
4
TMS
/ DA
P15
TDI /
-6
BR
KIO
7V
DD
sens
e8
ESR
09
/PO
RST
10
X40
4
ETK
_CO
N_o
pt
V_U
C/D
BG
_PO
RST
/ESR
0
DA
P0_A
P21.
6
/ESR
0
P21.
7
P21.
7G
ND
DA
P1_A
/TR
STR
439 22
R_o
pt
R43
3
0R_o
pt
P21.7
P21.
7
P20.2P2
0.2
R43
70R
P14.1
P14.0
R43
60R
R43
80R
_opt
P21.
7
P20.
2
DA
P0_A
R40
8
0R/D
BG
_PO
RST
V_U
C
GN
D
DA
P3_U
SR1
DA
P0D
AP1
/DB
G_P
OR
ST
R43
00R
_opt
R42
90R
DA
P2
R45
2
0R
P21.6
P20.2
GN
D
VR
EF1
GN
D3
GN
D5
KEY
7
GN
D9
DA
P12
DA
P04
USE
R1
8U
SER
06
RES
ET10
X40
6
DA
P_SC
RP33.6P33.7
R45
7
0R
V_S
TBY
User Manual 7-6 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Schematic and Layout
Figure 7-5 Schematic - Power Supply
11
22
33
44
55
66
77
88
DD
CC
BB
AA
5In
fineo
n Te
chno
logi
es A
GA
TV M
C A
CE
ATV
CES
Am
Cam
peon
1-1
2D
-855
79 N
eubi
berg
Tel.:
+49
-89-
234-
0
7
15.1
0.20
18
Num
ber:
Dat
e:
Shee
t:of
Tri
Boa
rd T
C3X
4L P
ower
supp
ly
1.0
Rev
isio
n:
G:\T
echn
ical
_Sup
port
\Tri
Core
\Tri
Boar
d\ED
A_D
XP\T
riBo
ard
AURI
X 2G
\Tri
Boar
d TC
3X4L
\Tri
Boar
d TC
3X4L
V1.
X\Su
pply
.sch
File
:
D50
4
LS T
67K
V_U
C
+1V
25V
DD
VD
DSB
S501
RES
ET
GN
D23
1Q
502
BC
848C
C51
54μ
7/10
V
GN
DG
ND
V_U
C
2 3
1Q
503
BC
858C
GN
D
V_U
C
/PORST
R51
31K
5
GN
DD50
7LP
T67
K
R51
268
0R
GN
DD50
6LP
T67
K
R51
162
0R
+3V
3
GN
D23
1Q
504
BC
848C
R51
0
82K
+1V
25
+3V
3V
_UC
D50
5LP
T67
K
CB
520
100n
GN
D
V_U
C
V_U
C
/PO
RST
/ESR
0
/ESR
1/E
SR1
/ESR
0
/PO
RST
/ESR
1
/ESR
0
/ESR
1
/PO
RST
/ESR
0
CB
512
100n
CB
513
100n
GN
D
GN
D
GN
D
+1V
25
C51
92,
2μF
GN
D
V_U
C
CB
515
100n
CB
516
100n
CB
517
100n
CB
518
100n
R52
1
0R
R52
2
0R
R52
3
0R
R52
40R
_opt
VD
DP3
V_U
C
R53
8
120R
R53
54K
7
R53
1
4K7
R53
210
K
R53
30R
R53
7
10K
R53
42K
2
R53
64K
7
GN
D
CB
519
100n
1
2
X50
1
POWER
VC
C_I
ND
501 M
SS2P
2 C50
2
100μ
F/40
VC
B50
110
0nG
ND
GN
D
V_P
RER
EGV
IN
GN
D
VIN
V_S
TBY
SW1
43
WD
I16
QST5
VS1
45
WA
K4
RSH
47
PG1
41V
S244
VST
2
ENA
3
AG1 6
SW2
42
FRE
24
RO
T17
INT
18
SDO
13
SCL
14
QU
C30
QC
O31
SYN
19
QT1
33
QT2
32
VC
I26
SEC
23
EVC
21
SCS
15
ERR
20
BSG
1R
SL48
STU
25
DR
G46
GND HS
SDI
12
SS1
11
SS2
10
QV
R29
AG2 7
AG3 8
AG4 28
AGS 9
TM22
GST
27
PG2
40
FB1
34
FB2
35
FB3
36
FB4
37
FB5
38
AG5 39
U50
1TL
F355
84Q
VV
S1/2
V_V
R
V_C
O
S502
ENA
GN
D
GN
D
C50
7
1μF/
10V
GN
D
C51
2
4,7μ
F/10
V
GN
D
V_U
C
QT1
QT2
GN
D
R50
7
100K
/PO
RST
1
3 2
Q50
5B
SS13
8N
/ESR
1
P14.
6
GN
D
P02.
7
C50
322μF
/10V
C50
8
4,7μ
F/10
VC
509
4,7μ
F/10
VC
510
4,7μ
F/10
VC
511
4,7μ
F/10
V
GN
D
GN
D
V_S
TBY
R50
610
0K
GN
D
R50
210
K
P33.
8
D50
2
SS26
VD
D_U
SB
L501
XA
L505
0-22
3MEB
L502
XA
L403
0-47
2MEC
R50
1
250m
R
4
3
1,2,5,6
Q50
1B
SL60
6SN
C50
147μF
/40V
GN
D
GN
D
GN
D
D50
3
SS22
_opt
GN
D
R50
80R R
509
20K
GN
D
V_C
O
CB
502
100n
R50
4
470R
D50
8
LP T
67K
GN
D
P15.
8P1
5.6
P15.
2
R50
5
10K
R50
3 1KP3
3.9
Q1
GND 6
SEN
SE/A
DJ
2
BY
P4
IN8
EN5
GND HS
U50
2TL
S205
B0E
JV33
GN
D
V_U
CC
505
10μF
C50
410
nF
+3V
3
GN
D
GN
D
VG
ATE
1N
2
71
8
3
456
Q50
6B
SZ15
DC
02K
D
GN
D
V_U
CC
521
22μF
L503
LTF5
022T
-3R
3N2R
5C
520
10μF
VG
ATE
1P
CB
510
100n
R52
00R
GN
D
V_S
TBY
1 32 4
X50
2
EmW
_Pw
r_op
t
GN
DV
DD
SB
VC
C_I
N
/PO
RST
R52
50R
_opt
+3V
3
P33.
10
POR
T[00
..33]
PORT[00..33]
C52
210μF
GN
D
PGND 8
LSC
ON
5
VC
C7
SW1
PWM
6SW
2
GND 4GND HS
PGND 3VS9 VS10
U50
3TL
F112
51_o
pt
C50
6
10μF
_optG
ND
V_U
C
GN
D
CB
506
100n
_opt
GN
D
GN
D
V_P
RER
EG
POW
ER
VEXT125
VEXT23
ESR
196
ESR
098
POR
ST97
VDD127
VEXT78
VDDP3126 P32.
0 / V
GA
TE1N
70
P32.
1 / V
GA
TE1P
71
VDD22 VDD58 VDD99 VSS HS
VDD/VDDSB10
VEVRSB59
U20
1ATC
3X4_
LQFP
CB
511
100n
User Manual 7-7 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Schematic and Layout
Figure 7-6 Schematic - Connectors (Plug)
11
22
33
44
55
66
77
88
DD
CC
BB
AA
6In
fineo
n Te
chno
logi
es A
GA
TV M
C A
CE
ATV
CES
Am
Cam
peon
1-1
2D
-855
79 N
eubi
berg
Tel.:
+49
-89-
234-
0
7
15.1
0.20
18
Num
ber:
Dat
e:
Shee
t:of
Tri
Boa
rd T
C3X
4L C
onne
ctor
s plu
g
1.0
Rev
isio
n:
G:\T
echn
ical
_Sup
port
\Tri
Core
\Tri
Boar
d\ED
A_D
XP\T
riBo
ard
AURI
X 2G
\Tri
Boar
d TC
3X4L
\Tri
Boar
d TC
3X4L
V1.
X\Co
nnec
tm.sc
hFi
le:
PER
IPH
ERA
LS
POR
TS
TOP
PLU
G1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80
X60
1
FTSH
-140
-02-
L-D
V-E
S-A
PLU
G1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80
X60
2
FTSH
-140
-02-
L-D
V-E
S-A
PLU
G1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80
X60
4
FTSH
-140
-02-
L-D
V-E
S-A
PLU
G1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80
X60
3
FTSH
-140
-02-
L-D
V-E
S-A
AD
C
GN
D
/ESR
0
GN
D
VC
C_I
NV
CC
_IN
GN
DG
ND
GN
DG
ND
GN
DV
DD
SB
+3V
3V
_UC
XTA
L[1.
.2]
/PO
RST
/ESR
0/E
SR1
NC
2.9
NC
2.17
NC
2.11
NC
2.13
/ESR
1
P15.
3P1
5.2
P20.
14P2
0.12
NC
2.10
NC
2.14
/PO
RST
XTA
L1X
TAL2
NC
2.12
P15.
5
P15.
1P1
5.0
P14.
0P1
4.1
P15.
4
P20.
11
NC
2.18
NC
2.54
P15.
8N
C2.
73N
C2.
72P1
0.3
NC
2.21
P10.
5N
C2.
24
P10.
2P2
3.1
P13.
1P1
3.0
P13.
3P1
3.2
NC
2.25
P22.
1P2
2.0
P22.
3P2
2.2
NC
2.26
P20.
9P2
0.10
P20.
13P0
0.4
P20.
3P2
0.6
P33.
5P2
0.2
P00.
0P0
0.1
P00.
2P0
0.3
NC
2.66
P00.
5
P00.
12
P32.
4
NC
2[5.
.80]
NC
1[5.
.80]
NC
1[5.
.80]
NC
2[5.
.80]
XTA
L[1.
.2]
V_U
C+3
V3
GN
D
GN
DG
ND
POR
T[00
..33]
GN
DV
DD
MG
ND
VA
REF
1G
ND
GN
D
V_U
C+3
V3
P00.
8
P33.
12P1
4.3
P33.
11
P00.
6P0
0.7
GN
D
P02.
6P0
2.7
P02.
8P3
3.7
GN
D
P00.
9N
C4.
7P0
2.0
P02.
1P0
2.2
P02.
3P0
2.4
P02.
5N
C4.
21N
C4.
23N
C4.
25N
C4.
27N
C4.
29N
C4.
31P1
0.1
P10.
6N
C4.
37N
C4.
39
NC
4.67
NC
4.22
NC
4.24
P15.
6P1
5.7
NC
4.30
NC
4.32
NC
4.34
NC
4.36
NC
4.44
NC
4.42
P33.
9
NC
4[5.
.80]
P23.
2N
C4.
40
NC
4.46
POR
T[00
..33]
NC
4[5.
.80]
NC
4.50
NC
4.48
AN
[0..4
7]A
N[0
..47]
NC
4.54
P33.
8
P33.
10
NC
4.52
NC
4.66
P33.
13
NC
4.68
NC
4.64
P33.
6N
C3.
65N
C3.
66N
C3.
63
P33.
4N
C3.
67
P20.
7P2
0.8
NC
4.14
P14.
6N
C4.
18N
C4.
20
NC
4.12
NC
4.10
NC
4.8
NC
4.6
NC
4.69
NC
4.74
NC
4.72
NC
4.76
NC
4.71
NC
4.73
NC
4.70
VA
REF
2
VFL
EX
NC
1.5
NC
1.7
NC
1.9
NC
1.11
NC
1.13
NC
1.15
NC
1.17
NC
1.19
NC
1.21
NC
1.23
NC
1.25
NC
1.27
NC
1.29
NC
1.31
NC
1.33
NC
1.35
NC
1.37
NC
1.39
NC
1.41
NC
1.43
NC
1.45
NC
1.47
NC
1.49
NC
1.51
NC
1.53
NC
1.55
NC
1.57
NC
1.59
NC
1.61
NC
1.63
NC
1.65
NC
1.67
NC
1.69
NC
1.71
NC
1.73
NC
1.75
NC
1.77
NC
1.79
P21.
6P2
1.7
NC
1.10
NC
1.12
NC
1.14
NC
1.16
NC
1.18
NC
1.20
NC
1.22
NC
1.24
NC
1.26
NC
1.28
NC
1.30
NC
1.32
NC
1.34
NC
1.36
NC
1.38
NC
1.40
NC
1.42
NC
1.44
NC
1.46
NC
1.48
P21.
2P2
1.3
P21.
4P2
1.5
NC
1.58
NC
1.60
NC
1.62
NC
1.64
NC
1.66
NC
1.68
NC
1.70
P20.
0N
C1.
74
NC
1.80
NC
1.78
NC
1.76
AN
0A
N1
AN
2A
N3
AN
4A
N5
AN
6A
N7
AN
8N
C3.
23A
N10
AN
11A
N12
AN
13N
C3.
33N
C3.
35
AN
16A
N17
NC
3.10
NC
3.12
AN
20A
N21
NC
3.18
NC
3.20
AN
24A
N25
NC
3.26
NC
3.28
NC
3.30
NC
3.32
NC
3.34
NC
3.36
NC
3.45
NC
3.47
NC
3.49
AN
35A
N36
AN
37A
N38
AN
39
NC
3.46
NC
3.48
NC
3.50
NC
3.52
AN
44A
N45
AN
46A
N47
NC
4.41
NC
4.43
P11.
2P1
1.3
NC
4.49
NC
4.51
P11.
6N
C4.
55N
C4.
57P1
1.9
P11.
10P1
1.11
P11.
12
NC
3[5.
.80]
NC
3[5.
.80]
User Manual 7-8 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Schematic and Layout
Figure 7-7 Schematic - Connectors (Socket)
11
22
33
44
55
66
77
88
DD
CC
BB
AA
7In
fineo
n Te
chno
logi
es A
GA
TV M
C A
CE
ATV
CES
Am
Cam
peon
1-1
2D
-855
79 N
eubi
berg
Tel.:
+49
-89-
234-
0
7
15.1
0.20
18
Num
ber:
Dat
e:
Shee
t:of
Tri
Boa
rd T
C3X
4L C
onne
ctor
s soc
ket
1.0
Rev
isio
n:
G:\T
echn
ical
_Sup
port
\Tri
Core
\Tri
Boar
d\ED
A_D
XP\T
riBo
ard
AURI
X 2G
\Tri
Boar
d TC
3X4L
\Tri
Boar
d TC
3X4L
V1.
X\Co
nnec
tf.sc
hFi
le:
BO
TTO
MSO
CK
ET1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80
X70
1
FLE-
140-
01-G
-DV
-A
SOC
KET
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80
X70
2
FLE-
140-
01-G
-DV
-A
SOC
KET
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80
X70
3
FLE-
140-
01-G
-DV
-A
SOC
KET
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80
X70
4
FLE-
140-
01-G
-DV
-A
GN
D
/ESR
0
GN
D
VC
C_I
NV
CC
_IN
GN
DG
ND
GN
DG
ND
GN
DV
DD
SB
+3V
3
PER
IPH
ERA
LS
POR
TS
V_U
C
XTA
L[1.
.2]
/PO
RST
/ESR
0/E
SR1
NC
2.9
NC
2.17
NC
2.11
NC
2.13
/ESR
1
P15.
3P1
5.2
P20.
14P2
0.12
NC
2.10
NC
2.14
/PO
RST
XTA
L1X
TAL2
NC
2.12
P15.
5
P15.
1P1
5.0
P14.
0P1
4.1
P15.
4
P20.
11
NC
2.18
NC
2.54
P15.
8P1
0.3
NC
2.21
P10.
5
P10.
2P2
3.1
P13.
1P1
3.0
P13.
3P1
3.2
NC
2.25
P22.
1P2
2.0
P22.
3P2
2.2
P20.
9P2
0.10
P20.
13P0
0.4
P20.
3P2
0.6
P33.
5P2
0.2
P00.
0P0
0.1
P00.
2P0
0.3
NC
2.66
P00.
5
P00.
12
P32.
4
NC
2[5.
.80]
NC
1[5.
.80]
NC
1[5.
.80]
NC
2[5.
.80]
XTA
L[1.
.2]
AD
C
V_U
C+3
V3
GN
D
GN
DG
ND
POR
T[00
..34]
GN
DV
DD
MG
ND
VA
REF
1G
ND
GN
D
V_U
C+3
V3
P00.
8
P33.
12P1
4.3
P33.
11
P00.
6P0
0.7
GN
D
P02.
6P0
2.7
P02.
8P3
3.7
GN
D
P00.
9N
C4.
7P0
2.0
P02.
1P0
2.2
P02.
3P0
2.4
P02.
5N
C4.
21N
C4.
23N
C4.
25N
C4.
27N
C4.
29N
C4.
31P1
0.1
P10.
6N
C4.
37N
C4.
39
NC
4.67
NC
4.22
NC
4.24
P15.
6P1
5.7
NC
4.30
NC
4.32
NC
4.34
NC
4.36
NC
4.44
NC
4.42
P33.
9
NC
4[5.
.80]
P23.
2N
C4.
40
NC
4.46
POR
T[00
..34]
NC
4[5.
.80]
NC
4.50
NC
4.48
AN
[0..4
7]A
N[0
..47]
NC
4.54
P33.
8
P33.
10
NC
4.52
NC
4.66
P33.
13
NC
4.68
NC
4.64
P33.
6
P33.
4
P20.
7P2
0.8
NC
4.14
NC
4.18
NC
4.20
NC
4.12
NC
4.10
NC
4.8
NC
4.6
NC
4.69
NC
4.74
NC
4.72
NC
4.76
NC
4.71
NC
4.73
NC
4.70
VA
REF
2
VFL
EX
NC
1.5
NC
1.7
NC
1.9
NC
1.11
NC
1.13
NC
1.15
NC
1.17
NC
1.19
NC
1.21
NC
1.23
NC
1.25
NC
1.27
NC
1.29
NC
1.31
NC
1.33
NC
1.35
NC
1.37
NC
1.39
NC
1.41
NC
1.43
NC
1.45
NC
1.47
NC
1.49
NC
1.51
NC
1.53
NC
1.55
NC
1.57
NC
1.59
NC
1.61
NC
1.63
NC
1.65
NC
1.67
NC
1.69
NC
1.71
NC
1.73
NC
1.75
NC
1.77
P21.
6P2
1.7
NC
1.10
NC
1.12
NC
1.14
NC
1.16
NC
1.18
NC
1.20
NC
1.22
NC
1.24
NC
1.26
NC
1.28
NC
1.30
NC
1.32
NC
1.34
NC
1.36
NC
1.38
NC
1.40
NC
1.42
NC
1.44
NC
1.46
NC
1.48
P21.
2P2
1.3
P21.
4P2
1.5
NC
1.58
NC
1.60
NC
1.62
NC
1.64
NC
1.66
NC
1.68
NC
1.70
P20.
0N
C1.
74
NC
1.78
NC
1.76
AN
0A
N1
AN
2A
N3
AN
4A
N5
AN
6A
N7
AN
8N
C3.
23A
N10
AN
11A
N12
AN
13N
C3.
33N
C3.
35
AN
16A
N17
AN
20A
N21
NC
3.18
NC
3.20
AN
24A
N25
NC
3.34
NC
3.36
NC
3.49
AN
35A
N36
AN
37A
N38
AN
39
NC
3.46
NC
3.48
NC
3.50
NC
3.52
AN
44A
N45
AN
46A
N47
NC
4.41
NC
4.43
P11.
2P1
1.3
NC
4.49
NC
4.51
P11.
6N
C4.
55N
C4.
57P1
1.9
P11.
10P1
1.11
P11.
12
NC
3[5.
.80]
NC
3[5.
.80]
NC
3.65
NC
3.66
NC
3.63
NC
3.67
NC
1.79
NC
1.80
NC
2.73
NC
2.72
NC
2.24
NC
2.26
NC
3.10
NC
3.12
NC
3.26
NC
3.28
NC
3.30
NC
3.32
NC
3.45
NC
3.47
P14.
6
User Manual 7-9 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Schematic and Layout
7.3 Layout
Figure 7-8 Component Plot Top Layer
U201
R39
5
X404
R212
S502
R222
CB205
R379
R372
C305
C310
X306
CB3
13
CB3
14
CB315
C311
U307
Y301
X604
R249
R246
R245 R244
X402
S201
R377
R204
R20
5
R215
R21
4
X201
X305X304X303
R240
R236
R234
R232
R230
R223
R361
R359
R211
D301
CB206
C30
3
U408
U407
U406
R451
R455
R456
R454
R446
R444
CB419
CB418
CB417CB416
CB415
CB414
D40
1
R430
R429
R423
CB405
C402
R411
BU401
L401
D40
2
R401
CB401
U404
U401
Y401
CB408
R403
R402
CB402
R344
R52
4
R424
R425
R426
R427
R428
CB520
R201
CB204R203
R20
2
C201
C20
2
R206
R207
Y201
R337 R357
R324
R39
9
R391
R392
R393
R394
R39
6R3
97
CB309
R532
C301 C302
R439
R531
R335
R336
R355
R356
U305
T301 T302
X301 X302
X60
2X603
X601
D302
D303
D304
D305
D306
D307
D308
D309
D50
5
D50
6
D50
7D504
X401
X501
S501
R354
C519
R452
CB203
R213
R216
R398
U50
2C505
D508
U50
1
L502
L501
CB501
C502
C507
C509
C508
C501
C503
C504
R501
R50
7
R508 R509
CB502
R231
R233
R235
R237
R241
R255R256
R39
0
R375
R376
R348
R349
R525
S202
X502
R346
R347
R457
X406
C522
CB316
CB31
7
U308
R248
User Manual 7-10 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Schematic and Layout
Figure 7-9 Component Plot Bottom Layer
X70
3
CB511
R388
R38
0
R378
Q30
1
R368
R37
1
R382
R41
9
R44
0
R36
9
R36
7
C320
C317
C31
6
C315
C314
C313
C312
Q403
R38
9
R383R385
R370
CB311 CB312
C208
C207
C20
5
C204
C203
R433
R52
3
R431
R381
R314
R252
R25
0
R251
R253
R254
CB2
02
R208
R408
U306
R52
1
R23
8
R365
R364
R363
R362
R360
CB310
C304
R449
R44
8
R44
7
R445
R443
R413
U405
L402
CB413C403
D403
R404
C401
R450
R442
R441
CB412
CB411
CB410
C40
5
C404
R422
R421
U403
Q402
Q401
R412
C40
6
R42
0
R414
R418
R41
7R416
R415
R410
R409
CB407
CB403
R407
U402
R406
R405
CB406
CB404
R305
R30
6
R308
R309
R315 R316
R318
R319
R522
R301
R311
R341
R340
R321
R322
R22
0R221
R533
R323 R34
3
CB301CB302
CB512
CB513
CB515
CB516
CB51
7
CB518
CB519
R537
R307
R317
R53
8
R534
R51
3
R535
R536
C515
R511
R512
R510
Q502
Q504
Q50
3
X702
X704
X701
U301 U302
R302
R34
2
CB303
CB304
CB305
CB306
CB307
CB308
R303
R304
R338
R330
R331
R358
R350
R351
U303U304
R33
2
R334
R33
3
R352
R35
3
R320
CB2
01
R209
CB510
R520
D503
R505
R504
C510
R502
R506
Q505
Q501
D501
C512
C511
D502
R503
R23
9
R312
R436
R437
R438
R313
R373
R374
Q506
L503
C520
C521
C506CB506
U503
CB409
R386
C306
User Manual 7-11 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Schematic and Layout
7.4 Layout with DimensioningThe following dimensions should be used for development of extension boards.
Figure 7-10 Dimensioning (mm)
User Manual 7-12 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Schematic and Layout
Figure 7-11 Dimensioning (mil)
The dimensioning is valid for all TriBoards.
User Manual RevisionHistory-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09
TriBoard Manual TC3X4LHardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Revision History
Page or Item Subjects (major changes since previous revision)
V1.2, 2019-09
Table 5-6 correct Short name and Description for SDO from TLF35584
chapter 3.10 add description for LIN master and slave changes
Revision History add complete history of all previous versions
V1.1, 2019-06
all add TC364 in LQFP package as usable device and adapt description for this devices
chapter 3 add detailed description of usable devices/restricted devices
V1.0, 2017-11
First version
Trademarks of Infineon Technologies AGµHVIC™, µIPM™, µPFC™, AU-ConvertIR™, AURIX™, C166™, CanPAK™, CIPOS™, CIPURSE™, CoolDP™, CoolGaN™, COOLiR™, CoolMOS™, CoolSET™, CoolSiC™,DAVE™, DI-POL™, DirectFET™, DrBlade™, EasyPIM™, EconoBRIDGE™, EconoDUAL™, EconoPACK™, EconoPIM™, EiceDRIVER™, eupec™, FCOS™, GaNpowIR™,HEXFET™, HITFET™, HybridPACK™, iMOTION™, IRAM™, ISOFACE™, IsoPACK™, LEDrivIR™, LITIX™, MIPAQ™, ModSTACK™, my-d™, NovalithIC™, OPTIGA™,OptiMOS™, ORIGA™, PowIRaudio™, PowIRStage™, PrimePACK™, PrimeSTACK™, PROFET™, PRO-SIL™, RASIC™, REAL3™, SmartLEWIS™, SOLID FLASH™,SPOC™, StrongIRFET™, SupIRBuck™, TEMPFET™, TRENCHSTOP™, TriCore™, UHVIC™, XHP™, XMC™.
Trademarks updated November 2015
Other TrademarksAll referenced product or service names and trademarks are the property of their respective owners.
Edition 2019-09Published by Infineon Technologies AG81726 Munich, Germany
© 2019 Infineon Technologies AG.All Rights Reserved.
Do you have a question about any aspect of this document?Email: [email protected]
Document referenceDoc_Number
IMPORTANT NOTICEThe information given in this document shall in noevent be regarded as a guarantee of conditions orcharacteristics ("Beschaffenheitsgarantie"). With respect to any examples, hints or any typicalvalues stated herein and/or any information regardingthe application of the product, Infineon Technologieshereby disclaims any and all warranties and liabilitiesof any kind, including without limitation warranties ofnon-infringement of intellectual property rights of anythird party. In addition, any information given in this document issubject to customer's compliance with its obligationsstated in this document and any applicable legalrequirements, norms and standards concerningcustomer's products and any use of the product ofInfineon Technologies in customer's applications. The data contained in this document is exclusivelyintended for technically trained staff. It is theresponsibility of customer's technical departments toevaluate the suitability of the product for the intendedapplication and the completeness of the productinformation given in this document with respect tosuch application.
For further information on technology, delivery termsand conditions and prices, please contact the nearestInfineon Technologies Office (www.infineon.com).
WARNINGS
Due to technical requirements products may containdangerous substances. For information on the typesin question please contact your nearest InfineonTechnologies office.
Except as otherwise explicitly approved by InfineonTechnologies in a written document signed byauthorized representatives of Infineon Technologies,Infineon Technologies’ products may not be used inany applications where a failure of the product or anyconsequences of the use thereof can reasonably beexpected to result in personal injury.
Please read the Important Notice and Warnings at the end of this document