Utility Product Guide
Braden gets the job done with superior winch and hoist design. Built to exceed typical use requirements, Braden products draw on decades of experience and innovation to provide reliable, cutting edge products.
Optional extension shafts, some operating at up to 4 times the speed of the winch drum, are available on all units.
Optional capstan for extension shaft makes it easier to pull lighter loads, faster.
Cable rollers for full load capacity up to 45° from center. Winch and bumper tested in compliance with SAE J706 to twice the rated load. (more information on page 17)
Optional built-in toolbox for extra storage and tool accessability.
Easy extension shaft clutch operation with positive indication of clutch position.
Independent static and dynamic brake for optimum safety and outstanding load control.
All BRADEN winches and hoists meet required safety and environmental standards for utility use.*Safety and environmental standards followed are subject to those in use at date of production.
Also see our capstan only drives and utility winches (pages 10-15)
Recovery Winch Bumpers
HUP12 (12,000lb.) ................................................................................................................................2
PD18C (20,000lb.) ................................................................................................................................4
PD35A (35,000lb.) ...............................................................................................................................8
Capstan Only Drives
PCD24B (6,000lb.) ..............................................................................................................................10
More Utility and Recovery Winches
BP200B (20,000lb.) .............................................................................................................................12
PD15B-41064-04 (15,000lb.) ............................................................................................................14
HP35A (33,000lb.) ..............................................................................................................................15
Accessories
Tension Roller & Capstan Head ...........................................................................................................16
Contents
2www.paccarwinch.com Tel 918-251-85112
Performance
Drum caPacity
77.0
10.3
10.3
27.5
23.0
27.5
ALL DIMENSIONS SHOWN IN INCHES
Dimensionals
Features• Universal Bumper Mount
• Rugged and compact design
• Enclosed oil bath “wet” disc brake for outstanding load control
• High efficiency planetary gearing
• Negative draft jaw clutch for positive engagement
• Drag brake to reduce drum overspin• Optional Street-side or Curb-side extension shaft
• Optional Two-speed Motor
ALL DIMENSIONS SHOWN IN INCHES
HUP12 Planetary Recovery Winch 12,000 lb (5,450kg)
Utility ProdUct GUide
www.paccarwinch.com Tel 918-251-8511 3
-01 DRUM CAPACITY(4.00” B x 9.10” F x 14.00” W)
PD/d 1 2 3 4 5 6
3/8” 11.6:1 38 83 134 192 256 327
1/2” 9.0:1 30 66 109 158 211
9/16” 8.1:1 26 59 98 144
* Rope capacity based on 90% of theoritical
LINE PULL
LINE SPEED
ROPE CAPACITY*
LB KG FPM MPM FT M
1 12,000 5,450 51 16 30 9
2 9,800 4,460 63 19 66 20
3 8,300 3,750 74 23 109 33
4 7,200 3,250 86 26 158 48
5 6,350 2,880 97 30 211 64
*Rope capacity based on 90% of theoritical
HUP12A-08119-01 11.9 cu in. Motor (195cc) 2700 PSI (175 bar) @ 20 gpm (76 lpm) Wire Rope Diameter: 1/2”
LOW SPEED HIGH SPEED
LINE PULL
LINE SPEED
LINE PULL
LINE SPEED
ROPE CAPACITY*
LB KG FPM MPM LB KG FPM MPM FT M
1 12,000 5,450 40 12 5,000 2,240 86 26 30 9
2 9,800 4,460 49 15 4,000 1,830 105 32 66 20
3 8,300 3,750 58 18 3,400 1,550 125 38 109 33
4 7,200 3,250 68 21 2,960 1,340 144 44 158 48
5 6,350 2,880 77 23 2,610 1,180 163 50 211 64
* Rope capacity based on 90% of theoritical
HUP12A-08142/071-01 14.20/7.10 cu in. 2-Speed Motor (233/116cc)2400 PSI (152 bar) @ 20 gpm (76 lpm) Wire Rope Diameter: 1/2”
EXTENSION SHAFT RATING
7” CAPSTAN 20” C.R. REEL
LINE PULL LINE SPEED LINE PULL LINE SPEED
lbs FPM lbs FPM
2,250 86 800 240
EXTENSION SHAFT RATING
7” CAPSTAN 20” C.R. REEL
LOW SPEED HIGH SPEED LOW SPEED HIGH SPEED
LINE PULL LINE SPEED LINE PULL LINE SPEED LINE PULL LINE SPEED LINE PULL LINE SPEED
lbs FPM lbs FPM lbs FPM lbs FPM
2,250 68 1,600 144 800 195 570 413
Performance
Drum caPacity
4www.paccarwinch.com Tel 918-251-85114
Performance
Drum caPacity
10.62
28.00
93.86
46.9346.93
ALL DIMENSIONS SHOWN IN INCHES
Features• Designed for compliance with SAE J706
• Jaw clutch with negative draft for positive clutch engagement
• Enclosed oil bath “wet” disc brake for outstanding load control
• Low-speed high-torque hydraulic motor
• Extension shaft speed is more than 4 times drum speed
• Drag brake to reduce drum overspin
• Optional Air Shift Kit for Freespool Clutch
ALL DIMENSIONS SHOWN IN INCHES
PD18C Planetary Recovery Winch 20,000 lb (9,100kg)
Dimensionals
Utility ProdUct GUide
www.paccarwinch.com Tel 918-251-8511 5
-11 DRUM CAPACITY(6.75” B x 13.00” F x 10.94” W)
PD/d 1 2 3 4 5 6
1/2” 14.5:1 37 79 126 178 235 298
9/16” 13.0:1 33 71 114 162 216
5/8” 11.8:1 30 65 105 150 201
* Rope capacity based on 90% of theoritical
-11/14 DRUM CAPACITY(6.75” B x 14.25” F x 10.94” W)
PD/d 1 2 3 4 5 6 7
1/2” 14.5:1 37 79 126 178 235 298 366
9/16” 13.0:1 33 71 114 162 216 275
5/8” 11.8:1 30 65 105 150 201 257
* Rope capacity based on 90% of theoritical
EXTENSION SHAFT RATING
7” CAPSTAN 20” C.R. REEL
LINE PULL LINE SPEED LINE PULL LINE SPEED
lbs FPM lbs FPM
3,000 197 1,000 560
LINE PULL
LINE SPEED
ROPE CAPACITY*
LB KG FPM MPM FT M
1 20,000 9,100 42 13 30 9
2 17,100 7,800 49 15 65 20
3 15,000 6,800 56 17 105 32
4 13,300 6,000 63 19 150 46
5 11,900 5,400 70 21 201 61
*Rope capacity based on 90% of theoritical
PD18C-11 F11.9 cu in. Motor (195cc)2450 PSI (169 bar) @ 30 gpm (113 lpm)Wire Rope Diameter: 5/8”
PD18C-11/14 11.9 cu in. Motor (195cc)2450 PSI (169 bar) @ 30 gpm (113 lpm)Wire Rope Diameter: 5/8”
Performance
Drum caPacity
LINE PULL
LINE SPEED
ROPE CAPACITY*
LB KG FPM MPM FT M
1 20,000 9,100 42 13 30 9
2 17,100 7,800 49 15 65 20
3 15,000 6,800 56 17 105 32
4 13,300 6,000 63 19 150 46
5 11,900 5,400 70 21 201 61
6 10,800 4,900 77 23 257 78
*Rope capacity based on 90% of theoritical
6www.paccarwinch.com Tel 918-251-85116
aDDitional Dimensional information
REEL-IN
11.61(295)
13.00 (330)
6.75(171)
13.68(347)
6.24(158)
22.12 (562)
11.00(279)
6.96(177)
7.12(181)
14.12 (359)
13.50 (343)6.75 (171)
2.50(63.5) 18.94 (481)
10.94 (278)
42.14(1070)
13.69 (348)
6.24(158)
7.12(181)
2.50(63.5)
24.59(624)
10.94 (278)18.94 (481) 11.60
(295)
13.00 (330)
6.75(171)
34.06(865)
22.12 (562)
11.00 (279)
6.96(177)
14.12 (359)
13.50 (343)6.75 (171)
21.07(535)
10.80(274)
aDDitional Dimensional information
PD18C-11 F
PD18C-11 FEB
ALL DIMENSIONS SHOWN IN INCHES
ALL DIMENSIONS SHOWN IN INCHES
PD18C Planetary Recovery Winch 20,000 lb (9,100kg)Cont.
Utility ProdUct GUide
www.paccarwinch.com Tel 918-251-8511 7
14.00(355)
7.12(181)
7.44(189)
11.50(292)
14.40(366)
14.55(370)
16.13(410)
21.00(533)
21.00(533)
6.75(171)
PD18C-11/14
aDDitional Dimensional information
ALL DIMENSIONS SHOWN IN INCHES
8www.paccarwinch.com Tel 918-251-85118
Performance
Drum caPacity
PD35A Planetary Recovery Winch 35,000 lb (15,900kg)
Features• Designed for compliance with SAE J706
• Jaw clutch with negative draft for positive clutch en-gagement
• Enclosed oil bath “wet” disc brake for outstanding load control
• Extension shaft rotational speed is 5.4:1 speed of winch
• Dual tool boxes with expanded metal bottoms
ALL DIMENSIONS SHOWN IN INCHES
aDDitional Dimensional information Dimensionals
Utility ProdUct GUide
www.paccarwinch.com Tel 918-251-8511 9
Performance
Drum caPacity
-01 DRUM CAPACITY(6.07” B x 14.00” F x 12.30” W)
PD/d 1 2 3 4 5 6
5/8” 10.7:1 31 67 109 157 211 271
3/4” 9.0:1 26 58 96 139 188
7/8” 8.0:1 23 51 85 125
* Rope capacity based on 90% of theoretical
LINE PULL
LINE SPEED
ROPE CAPACITY*
LB KG FPM MPM FT M
1 35,000 15,900 27 8 26 8
2 28,690 13,040 33 10 58 18
3 24,300 11,045 39 12 95 29
4 21,080 9,580 46 14 138 42
5 18,620 8,460 52 16 187 57
*Rope capacity based on 90% of theoretical
EXTENSION SHAFT RATING
7” CAPSTAN
LINE PULL LINE SPEED
lbs FPM
3,200 185
aDDitional Dimensional information
PD35A-35119-0111.9 cu in. Motor (157cc)2580 PSI (178 bar) @ 30 gpm (114 lpm)Wire Rope Diameter: 3/4”
THREE-DIMENSIONAL CUTAWAY OF PD35A’S
CAPSTAN SHAFT, MOTOR AND STORAGE
10www.paccarwinch.com Tel 918-251-851110
Performance
aDDitional Dimensional information
FILL &VENT PORT
DRAINPORT LEVEL
PORT
3/4-10UNC-2B4 PLACES
Ø .646 THRU6 HOLES
BRAKE RELEASEPORT
2.752.75
8.50
8.507.16
3.58
3.58
7.16
Ø 4.75
7.73
.59Ø .75
3.380Ø 2.434
2.56
5.63
Ø 8.00
10.84
28.00(711)
10.66(271)
94.00(2388)
28.00(711)
10.66(271)
94.00(2388)
Capstan Only Bumper with Dual Tool Boxes
Features• Up to 6,000 lb Rating on 7 in. dia. Capstan
• High efficiency planetary gearing
• High capacity output bearings
• Several motor options provide optimum performance
ALL DIMENSIONS SHOWN IN INCHES
PCD24B Planetary Capstan Drive 6,000 lb (2,722kg)
Dimensionals
ALL DIMENSIONS SHOWN IN INCHES
Utility ProdUct GUide
www.paccarwinch.com Tel 918-251-8511 11
FOR FLOW UP TO 20 GPMPART NO.
MODEL NO. PRESSURE FLOW OUTPUT SHAFT 7” CAPSTAN 20” C.R. REEL
TORQUE SPEED LINE PULL LINE SPEED LINE PULL LINE SPEED
PSI GPM in. lbs. RPM lbs FPM lbs FPM
03551 PCD24B-08080-01 2,500 20 16,000 65 4,000 127 1,600 343
03616 PCD24B-08119-01H 2,700 20 24,000 42 6,000 87 2,400 220
03842 PCD24B-08049-01 2800 20 12,000 106 3,000 222 1,200 560
FOR FLOW UP TO 30 GPMPART NO.
MODEL NO. PRESSURE FLOW OUTPUT SHAFT 7” CAPSTAN 20” C.R. REEL
TORQUE SPEED LINE PULL LINE SPEED LINE PULL LINE SPEED
PSI GPM in. lbs. RPM lbs FPM lbs FPM
03632 PCD24B-08080-01 2,550 30 16,000 102 4,000 213 1,600 534
03631 PCD24B-08119-01H 2,400 30 24,000 68 6,000 142 2,400 356
PDC24B-08080-01PN. 03632CHAR-LYNN 2000 SERIES 8.0 CU IN/REV MOTOR
3.21
.8117.47
6.31
PORT “B” PORT “A”
2.034.00SAE -10 O-RING
BOSS PORT(7/8-14 THD) TYP 2X
PDC24B-08049-01PN. 03842CHAR-LYNN 2000 SERIES 4.9 CU IN/REV MOTOR
18.35
3.21
.8117.47
6.31
PORT “B” PORT “A”2.03
4.00SAE -10 O-RINGBOSS PORT(7/8-14 THD) TYP 2X
18.35
PDC24B-08080-01PN. 03551PARKER TORQLINK TB SERIES 8.0 CU IN/REV MOTOR
2.59
14.1217.31
PORT “B”PORT “A”
3.74
16.88
5.10
PDC24B-08119-01PN. 03616PARKER TORQLINK TB 11.9 CU IN/REV MOTOR
PDC24B-08049-01PN. 03631CHAR-LYNN 2000 SERIES 11.9 CU IN/REV MOTOR
3.24
17.18
8.03
PORT “B”PORT “A”
.88
6.00
SAE -10 O-RINGBOSS PORT(7/8-14 THD) TYP 2X
14.24
17.38
.88
3.21
.8117.47
6.31
PORT “B” PORT “A”2.03
4.00
18.35
6.00
PDC24B-08080-01PN. 03632CHAR-LYNN 2000 SERIES 8.0 CU IN/REV MOTOR
3.21
.8117.47
6.31
PORT “B” PORT “A”
2.034.00SAE -10 O-RING
BOSS PORT(7/8-14 THD) TYP 2X
PDC24B-08049-01PN. 03842CHAR-LYNN 2000 SERIES 4.9 CU IN/REV MOTOR
18.35
3.21
.8117.47
6.31
PORT “B” PORT “A”2.03
4.00SAE -10 O-RINGBOSS PORT(7/8-14 THD) TYP 2X
18.35
PDC24B-08080-01PN. 03551PARKER TORQLINK TB SERIES 8.0 CU IN/REV MOTOR
2.59
14.1217.31
PORT “B”PORT “A”
3.74
16.88
5.10
PDC24B-08119-01PN. 03616PARKER TORQLINK TB 11.9 CU IN/REV MOTOR
PDC24B-08049-01PN. 03631CHAR-LYNN 2000 SERIES 11.9 CU IN/REV MOTOR
3.24
17.18
8.03
PORT “B”PORT “A”
.88
6.00
SAE -10 O-RINGBOSS PORT(7/8-14 THD) TYP 2X
14.24
17.38
.88
3.21
.8117.47
6.31
PORT “B” PORT “A”2.03
4.00
18.35
6.00
Performance
aDDitional Dimensional information
12www.paccarwinch.com Tel 918-251-851112
CHAINCASE DRAIN SAE -8 ORB(3/4-16 THD)
OIL LEVEL
9.00
7.58
43.00
30.51
Ø 5.00
19.77
"B"
8.01
"A"
23.9312.83
8.01(203)
23.93(608)
12.83(326) 9.0 (227)
7.58(192)
22.75(578)
30.51(775)
43.0(1092)
6.2(157)
5.0(127)
BA
19.77(502)
12.75(324)
DIA
OIL LEVEL
DRUM
DRAIN TO TANK 1/8-27 NPT
CHAINCASE DRAINSAE -8 ORB
(3/4-16 THD)
HAUL-IN PORT
PAY-OUT PORT3/4-16 ORB
DRAG BRAKEACTUATION PORT
1/8-27 NPT
ALL DIMENSIONS SHOWN IN INCHES
BP200B Underground Cable Pulling Winch 20,000lb (9,100kg)
Features• Compact design requires limited modification to
service body compartments for simplified installation
• Adjustable Low-Drag Free Spool system permits operator to disconnect drum and pull off cable with minimal effort
• Level Wind System provides even distribution of cable under tension and allows the operator to make simple adjustments to accomodate changing cable conditions
• Two-Speed Motor delivers excellent low speed power and feathering control with shift-on-the-fly capability and a wide speed range
Performance & Drum caPacity
Dimensionals
Utility ProdUct GUide
www.paccarwinch.com Tel 918-251-8511 13
BP200B-23212/106-9/16-4621.20/10.60 cu in. Motor (348/174cc)2500 PSI (172 bar) @ 30 gpm (113 lpm)Wire Rope Diameter: 9/16”
LOW SPEED HIGH SPEED
LINE PULL
LINE SPEED
LINE PULL
LINE SPEED
ROPE CAPACITY*
LB KG FPM MPM LB KG FPM MPM FT M
1 20,000 9,100 44 13 9,900 4,500 88 27 148 45
2 18,450 8,370 48 15 9,100 4,130 96 29 66 94
3 17,100 7,760 52 16 8,450 3,830 104 32 109 147
4 16,000 7,260 55 17 7,850 3,560 111 34 158 204
5 15,000 6,800 59 18 7,350 3,330 119 36 211 264
6 14,000 6,350 63 19 6,900 3,130 126 38 1,077 329
7 13,270 6,020 67 20 6,540 2,970 134 41 1,301 396
8 12,550 5,700 70 21 6,200 2,810 141 43 1,537 468
* Rope capacity based on 90% of theoritical
HAUL-IN
35.52
22.53
17.66
14.96
12.98
29.00
16.87
11.87
7.3814.75
11.38
35.52 (902)22.53 (572)
17.66 (448)14.96 (380)
12.98(330)
29.0(737)
16.87(428)
11.38 (289)
14.75 (375)7.38 (187)
DIAMOND SCREWDISENGAGED POSITION
DIAMOND SCREWENGAGED POSITION
FREESPOOLINDICATORSWITCH
11.87(302)
1.125(28.5)
HAUL-IN
Performance & Drum caPacity
14www.paccarwinch.com Tel 918-251-851114
HOIST
8X Ø .656
LOWERING PORTSAE -16 O-RING BOSS(1 5/16-12 THD.)
CASE DRAIN MUST BEDRAINED BACK TO TANK
HOISTING PORTSAE -16 O-RING BOSS(1 5/16-12 THD.)
Ø 10.63
6.75 13.50 3.84
27.8819.508.38
5.001.66
Ø 20.00
(.63)
(2.82)5.50
11.00
1.75
2.25 16.63
5.25
1.00
21.75(552)10.00
(254)
22.00
12.00
1.38
11.62
6.252.63
ALL DIMENSIONS SHOWN IN INCHES
8.29(210)
8.38(213)
4.44(113)
-04 DRUM CAPACITY(10.62” B x 20.00” F x 13.50” W)
PD/d 1 2 3 4 5 6 7 8 9
1/2” 22.0:1 78 163 255 354 460 573 694 822 957**
9/16” 20.0:1 70 147 231 322 420 525 637 756**
5/8” 18.0:1 63 133 210 294 385 483 589**
7/8” * 46 99 159 226 300
1” * 41 89 144 206
1 1/8” * 36 79 129 186
* Recommended for poly rope only. Use poly rope anchor PN. 24413** Does not meet ANSI specifications
LINE PULL
LINE SPEED
ROPE CAPACITY*
LB KG FPM MPM FT M
1 14,500 6,800 200 61 41 12
2 12,400 5,600 234 71 89 27
3 10,800 4,900 269 82 144 44
4 9,600 4,300 303 92 206 63
*Use poly rope anchor PN. 24413
PD15B-41064-046.38 cu in. Motor (104cc)2600 PSI (179 bar) @ 80 gpm (303 lpm)Wire Rope Diameter: 1” Poly Rope
Performance & Drum caPacity
Dimensionals
Performance & Drum caPacity
PD15B-41064-04 Planetary Turret Winch 15,000lb. (6,800kg)
Features• Spring-applied, hydraulically-released parking brake
with more than 3:1 design factor.
• Overrunning clutch to prevent fall-back.
• Patented BRADEN Brake Valve known for precise lowering control.
Dimensionals
Utility ProdUct GUide
www.paccarwinch.com Tel 918-251-8511 15
Dimensionals
LOW SPEED HIGH SPEED
LINE PULL
LINE SPEED
LINE PULL
LINE SPEED
ROPE CAPACITY*
LB KG FPM MPM FPM MPM FPM MPM FT M
1 35,000 15,880 26 8 17,500 7,940 57 17 26 8
2 28,690 13,010 58 18 14,340 6,510 70 21 58 18
3 24,300 11,020 96 29 12,150 5,520 83 25 96 29
4 21,070 9,560 139 42 10,540 4,780 95 29 139 42
5 18,600 8,440 188 57 9,300 4,220 108 33 188 57
* Rope capacity based on 90% of theoretical
HP35A-35102/051-01 10.20/5.10 cu in. 2-Speed Motor (167/84cc) 2750 PSI (171 bar) @ 60 gpm (227 lpm) Wire Rope Diameter: 3/4”
-01 DRUM CAPACITY(6.07” B x 14.00” F x 12.30” W)
PD/d 1 2 3 4 5 6
5/8” 10.7:1 31 67 109 157 211 271
3/4” 9.0:1 26 58 96 139 188
7/8” 8.0:1 23 51 85 125
* Rope capacity based on 90% of theoretical
Performance & Drum caPacity
HP35A Planetary Recovery Winch 35,000lb (15,880kg)
Features• Sealed two-stage high-effi ciency planetary reduction
gearing provides continuous duty performance for long pulls
• Enclosed oil bath “wet” disc brake for precision load control
• SAE J706 compliance-testedto ensure safe and secure operation
ALL DIMENSIONS SHOWN IN INCHES
The tension roller system holds the cable close to the drum while in motion to keep the line evenly spooled and prevent most tangles. The optional sensor alerts the operator when only one layer remains on the drum.
Benefits• Saves time by preventing most tangles.
• Promotes even wear on the cable.
• Sensor option improves safety when lowering a load.
• Easy to service and test.
Availabile for the following winch modelsPD15B*Ask about availability on other models.
www.paccarwinch.com Tel 918-251-851116
aDDitional imPortant BumPer information
Capstan Head
Benefits• Easy to attach and remove.
• Easy to operate.
• Easy to store.
Availabile for the following winch modelsHUP12, PD18C, PD35A, PCD24B*Ask about availability on other models.
The Braden Capstan Head attaches to a capstan shaft, allowing for quick recovery of lighter loads.
Utility Accessories
Tension Rollers
Utility ProdUct GUide
17www.paccarwinch.com Tel 918-251-8511 17Tel 918-251-8511
Downward pulls by winch or capstan require additional support by a customer supplied stiff leg to prevent damage to truck suspension and/or bumper. Winch ratings are for the winch, bumper, and mounting brack-ets only and are not necessarily representative of the vehicle frame strength for which BRADEN assumes no liability
CAUTIONWARNING! !
aDDitional imPortant BumPer information
When using a sheave to 2-part line, the effective load on the bumper and truck frame is doubled. Winch pulls using a 2-part line should be horizontal and lim-ited to 15° (degrees) of the vehicle’s horizontal center-line.
CAUTIONWARNING! !
Downward Pulls
2-Part Line or Self-Recovery
www.paccarwinch.com
NOTES:
Find out more about Braden and the full line of PACCAR Winch products at www.paccarwinch.com.
Braden began in 1924 as the Braden Steel Corporation located in Tulsa, Oklahoma.
Owner Glenn Braden, and a handfull of hard working men, supplied drive heads for the booming oil industry.
Braden’s close relationship with oil production and the birth of the American auto industry came together in 1927. Braden developed its first truck mounted winch and the first oil soaked winch safety brake. This innovation set a standard for safety and reliability in the industry.
Today, the Braden tradition lives on with winches and hoists designed to get the job done. Simple, rugged and long-lasting.
®
®
®
800 E DALLAS ST BROKEN ARROW OK U.S.A. 74013 TEL (918) 251-8511/FAX (918) 259-1575
LIT2049 Rev 8 08-2015 (SD) © 2015 PACCAR Inc ALL RIGHTS RESERVED
800 E Dallas St Broken Arrow, OK 74013Tel 918-251-8511 / Fax 918-259-1575www.paccarwinch.com
WINCH
SY
STEM CERTIFICATION
ISO 14001:2004
SY
STEM CERTIFICATION
ISO 9001:2000