utility product guide - buckeye body & equipment

Utility Product Guide

Braden gets the job done with superior winch and hoist design. Built to exceed typical use requirements, Braden products draw on decades of experience and innovation to provide reliable, cutting edge products.

Optional extension shafts, some operating at up to 4 times the speed of the winch drum, are available on all units.

Optional capstan for extension shaft makes it easier to pull lighter loads, faster.

Cable rollers for full load capacity up to 45° from center. Winch and bumper tested in compliance with SAE J706 to twice the rated load. (more information on page 17)

Optional built-in toolbox for extra storage and tool accessability.

Easy extension shaft clutch operation with positive indication of clutch position.

Independent static and dynamic brake for optimum safety and outstanding load control.

All BRADEN winches and hoists meet required safety and environmental standards for utility use.*Safety and environmental standards followed are subject to those in use at date of production.

Also see our capstan only drives and utility winches (pages 10-15)

Recovery Winch Bumpers

HUP12 (12,000lb.) ................................................................................................................................2

PD18C (20,000lb.) ................................................................................................................................4

PD35A (35,000lb.) ...............................................................................................................................8

Capstan Only Drives

PCD24B (6,000lb.) ..............................................................................................................................10

More Utility and Recovery Winches

BP200B (20,000lb.) .............................................................................................................................12

PD15B-41064-04 (15,000lb.) ............................................................................................................14

HP35A (33,000lb.) ..............................................................................................................................15

Accessories

Tension Roller & Capstan Head ...........................................................................................................16

Contents

2www.paccarwinch.com Tel 918-251-85112

Performance

Drum caPacity

77.0

10.3

10.3

27.5

23.0

27.5

ALL DIMENSIONS SHOWN IN INCHES

Dimensionals

Features• Universal Bumper Mount

• Rugged and compact design

• Enclosed oil bath “wet” disc brake for outstanding load control

• High efficiency planetary gearing

• Negative draft jaw clutch for positive engagement

• Drag brake to reduce drum overspin• Optional Street-side or Curb-side extension shaft

• Optional Two-speed Motor


HUP12 Planetary Recovery Winch 12,000 lb (5,450kg)

Utility ProdUct GUide

www.paccarwinch.com Tel 918-251-8511 3

-01 DRUM CAPACITY(4.00” B x 9.10” F x 14.00” W)

PD/d 1 2 3 4 5 6

3/8” 11.6:1 38 83 134 192 256 327

1/2” 9.0:1 30 66 109 158 211

9/16” 8.1:1 26 59 98 144

* Rope capacity based on 90% of theoritical

LINE PULL

LINE SPEED

ROPE CAPACITY*

LB KG FPM MPM FT M

1 12,000 5,450 51 16 30 9

2 9,800 4,460 63 19 66 20

3 8,300 3,750 74 23 109 33

4 7,200 3,250 86 26 158 48

5 6,350 2,880 97 30 211 64

*Rope capacity based on 90% of theoritical

HUP12A-08119-01 11.9 cu in. Motor (195cc) 2700 PSI (175 bar) @ 20 gpm (76 lpm) Wire Rope Diameter: 1/2”

LOW SPEED HIGH SPEED

LINE PULL

LINE SPEED

LINE PULL

LINE SPEED

ROPE CAPACITY*

LB KG FPM MPM LB KG FPM MPM FT M

1 12,000 5,450 40 12 5,000 2,240 86 26 30 9

2 9,800 4,460 49 15 4,000 1,830 105 32 66 20

3 8,300 3,750 58 18 3,400 1,550 125 38 109 33

4 7,200 3,250 68 21 2,960 1,340 144 44 158 48

5 6,350 2,880 77 23 2,610 1,180 163 50 211 64


HUP12A-08142/071-01 14.20/7.10 cu in. 2-Speed Motor (233/116cc)2400 PSI (152 bar) @ 20 gpm (76 lpm) Wire Rope Diameter: 1/2”

EXTENSION SHAFT RATING

7” CAPSTAN 20” C.R. REEL

LINE PULL LINE SPEED LINE PULL LINE SPEED

lbs FPM lbs FPM

2,250 86 800 240



LOW SPEED HIGH SPEED LOW SPEED HIGH SPEED

LINE PULL LINE SPEED LINE PULL LINE SPEED LINE PULL LINE SPEED LINE PULL LINE SPEED

lbs FPM lbs FPM lbs FPM lbs FPM

2,250 68 1,600 144 800 195 570 413

Performance

Drum caPacity


Performance

Drum caPacity

10.62

28.00

93.86

46.9346.93


Features• Designed for compliance with SAE J706

• Jaw clutch with negative draft for positive clutch engagement


• Low-speed high-torque hydraulic motor

• Extension shaft speed is more than 4 times drum speed

• Drag brake to reduce drum overspin

• Optional Air Shift Kit for Freespool Clutch


PD18C Planetary Recovery Winch 20,000 lb (9,100kg)

Dimensionals




PD/d 1 2 3 4 5 6

1/2” 14.5:1 37 79 126 178 235 298

9/16” 13.0:1 33 71 114 162 216

5/8” 11.8:1 30 65 105 150 201


-11/14 DRUM CAPACITY(6.75” B x 14.25” F x 10.94” W)

PD/d 1 2 3 4 5 6 7

1/2” 14.5:1 37 79 126 178 235 298 366

9/16” 13.0:1 33 71 114 162 216 275

5/8” 11.8:1 30 65 105 150 201 257




LINE PULL LINE SPEED LINE PULL LINE SPEED

lbs FPM lbs FPM

3,000 197 1,000 560

LINE PULL

LINE SPEED

ROPE CAPACITY*

LB KG FPM MPM FT M

1 20,000 9,100 42 13 30 9

2 17,100 7,800 49 15 65 20

3 15,000 6,800 56 17 105 32

4 13,300 6,000 63 19 150 46

5 11,900 5,400 70 21 201 61


PD18C-11 F11.9 cu in. Motor (195cc)2450 PSI (169 bar) @ 30 gpm (113 lpm)Wire Rope Diameter: 5/8”

PD18C-11/14 11.9 cu in. Motor (195cc)2450 PSI (169 bar) @ 30 gpm (113 lpm)Wire Rope Diameter: 5/8”

Performance

Drum caPacity

LINE PULL

LINE SPEED

ROPE CAPACITY*

LB KG FPM MPM FT M

1 20,000 9,100 42 13 30 9

2 17,100 7,800 49 15 65 20

3 15,000 6,800 56 17 105 32

4 13,300 6,000 63 19 150 46

5 11,900 5,400 70 21 201 61

6 10,800 4,900 77 23 257 78



aDDitional Dimensional information

REEL-IN

11.61(295)

13.00 (330)

6.75(171)

13.68(347)

6.24(158)

22.12 (562)

11.00(279)

6.96(177)

7.12(181)

14.12 (359)

13.50 (343)6.75 (171)

2.50(63.5) 18.94 (481)

10.94 (278)

42.14(1070)

13.69 (348)

6.24(158)

7.12(181)

2.50(63.5)

24.59(624)

10.94 (278)18.94 (481) 11.60

(295)

13.00 (330)

6.75(171)

34.06(865)

22.12 (562)

11.00 (279)

6.96(177)

14.12 (359)

13.50 (343)6.75 (171)

21.07(535)

10.80(274)


PD18C-11 F

PD18C-11 FEB



PD18C Planetary Recovery Winch 20,000 lb (9,100kg)Cont.



14.00(355)

7.12(181)

7.44(189)

11.50(292)

14.40(366)

14.55(370)

16.13(410)

21.00(533)

21.00(533)

6.75(171)

PD18C-11/14




Performance

Drum caPacity

PD35A Planetary Recovery Winch 35,000 lb (15,900kg)

Features• Designed for compliance with SAE J706

• Jaw clutch with negative draft for positive clutch en-gagement


• Extension shaft rotational speed is 5.4:1 speed of winch

• Dual tool boxes with expanded metal bottoms


aDDitional Dimensional information Dimensionals



Performance

Drum caPacity


PD/d 1 2 3 4 5 6

5/8” 10.7:1 31 67 109 157 211 271

3/4” 9.0:1 26 58 96 139 188

7/8” 8.0:1 23 51 85 125

* Rope capacity based on 90% of theoretical

LINE PULL

LINE SPEED

ROPE CAPACITY*

LB KG FPM MPM FT M

1 35,000 15,900 27 8 26 8

2 28,690 13,040 33 10 58 18

3 24,300 11,045 39 12 95 29

4 21,080 9,580 46 14 138 42

5 18,620 8,460 52 16 187 57

*Rope capacity based on 90% of theoretical


7” CAPSTAN

LINE PULL LINE SPEED

lbs FPM

3,200 185


PD35A-35119-0111.9 cu in. Motor (157cc)2580 PSI (178 bar) @ 30 gpm (114 lpm)Wire Rope Diameter: 3/4”

THREE-DIMENSIONAL CUTAWAY OF PD35A’S

CAPSTAN SHAFT, MOTOR AND STORAGE


Performance


FILL &VENT PORT

DRAINPORT LEVEL

PORT

3/4-10UNC-2B4 PLACES

Ø .646 THRU6 HOLES

BRAKE RELEASEPORT

2.752.75

8.50

8.507.16

3.58

3.58

7.16

Ø 4.75

7.73

.59Ø .75

3.380Ø 2.434

2.56

5.63

Ø 8.00

10.84

28.00(711)

10.66(271)

94.00(2388)

28.00(711)

10.66(271)

94.00(2388)

Capstan Only Bumper with Dual Tool Boxes

Features• Up to 6,000 lb Rating on 7 in. dia. Capstan

• High efficiency planetary gearing

• High capacity output bearings

• Several motor options provide optimum performance


PCD24B Planetary Capstan Drive 6,000 lb (2,722kg)

Dimensionals




FOR FLOW UP TO 20 GPMPART NO.

MODEL NO. PRESSURE FLOW OUTPUT SHAFT 7” CAPSTAN 20” C.R. REEL

TORQUE SPEED LINE PULL LINE SPEED LINE PULL LINE SPEED

PSI GPM in. lbs. RPM lbs FPM lbs FPM

03551 PCD24B-08080-01 2,500 20 16,000 65 4,000 127 1,600 343

03616 PCD24B-08119-01H 2,700 20 24,000 42 6,000 87 2,400 220

03842 PCD24B-08049-01 2800 20 12,000 106 3,000 222 1,200 560

FOR FLOW UP TO 30 GPMPART NO.

MODEL NO. PRESSURE FLOW OUTPUT SHAFT 7” CAPSTAN 20” C.R. REEL

TORQUE SPEED LINE PULL LINE SPEED LINE PULL LINE SPEED

PSI GPM in. lbs. RPM lbs FPM lbs FPM

03632 PCD24B-08080-01 2,550 30 16,000 102 4,000 213 1,600 534

03631 PCD24B-08119-01H 2,400 30 24,000 68 6,000 142 2,400 356

PDC24B-08080-01PN. 03632CHAR-LYNN 2000 SERIES 8.0 CU IN/REV MOTOR

3.21

.8117.47

6.31

PORT “B” PORT “A”

2.034.00SAE -10 O-RING

BOSS PORT(7/8-14 THD) TYP 2X


18.35

3.21

.8117.47

6.31

PORT “B” PORT “A”2.03

4.00SAE -10 O-RINGBOSS PORT(7/8-14 THD) TYP 2X

18.35

PDC24B-08080-01PN. 03551PARKER TORQLINK TB SERIES 8.0 CU IN/REV MOTOR

2.59

14.1217.31

PORT “B”PORT “A”

3.74

16.88

5.10

PDC24B-08119-01PN. 03616PARKER TORQLINK TB 11.9 CU IN/REV MOTOR


3.24

17.18

8.03


.88

6.00

SAE -10 O-RINGBOSS PORT(7/8-14 THD) TYP 2X

14.24

17.38

.88

3.21

.8117.47

6.31


4.00

18.35

6.00


3.21

.8117.47

6.31

PORT “B” PORT “A”

2.034.00SAE -10 O-RING

BOSS PORT(7/8-14 THD) TYP 2X


18.35

3.21

.8117.47

6.31


4.00SAE -10 O-RINGBOSS PORT(7/8-14 THD) TYP 2X

18.35

PDC24B-08080-01PN. 03551PARKER TORQLINK TB SERIES 8.0 CU IN/REV MOTOR

2.59

14.1217.31


3.74

16.88

5.10

PDC24B-08119-01PN. 03616PARKER TORQLINK TB 11.9 CU IN/REV MOTOR


3.24

17.18

8.03


.88

6.00

SAE -10 O-RINGBOSS PORT(7/8-14 THD) TYP 2X

14.24

17.38

.88

3.21

.8117.47

6.31


4.00

18.35

6.00

Performance



CHAINCASE DRAIN SAE -8 ORB(3/4-16 THD)

OIL LEVEL

9.00

7.58

43.00

30.51

Ø 5.00

19.77

"B"

8.01

"A"

23.9312.83

8.01(203)

23.93(608)

12.83(326) 9.0 (227)

7.58(192)

22.75(578)

30.51(775)

43.0(1092)

6.2(157)

5.0(127)

BA

19.77(502)

12.75(324)

DIA

OIL LEVEL

DRUM

DRAIN TO TANK 1/8-27 NPT

CHAINCASE DRAINSAE -8 ORB

(3/4-16 THD)

HAUL-IN PORT

PAY-OUT PORT3/4-16 ORB

DRAG BRAKEACTUATION PORT

1/8-27 NPT


BP200B Underground Cable Pulling Winch 20,000lb (9,100kg)

Features• Compact design requires limited modification to

service body compartments for simplified installation

• Adjustable Low-Drag Free Spool system permits operator to disconnect drum and pull off cable with minimal effort

• Level Wind System provides even distribution of cable under tension and allows the operator to make simple adjustments to accomodate changing cable conditions

• Two-Speed Motor delivers excellent low speed power and feathering control with shift-on-the-fly capability and a wide speed range

Performance & Drum caPacity

Dimensionals



BP200B-23212/106-9/16-4621.20/10.60 cu in. Motor (348/174cc)2500 PSI (172 bar) @ 30 gpm (113 lpm)Wire Rope Diameter: 9/16”


LINE PULL

LINE SPEED

LINE PULL

LINE SPEED

ROPE CAPACITY*

LB KG FPM MPM LB KG FPM MPM FT M

1 20,000 9,100 44 13 9,900 4,500 88 27 148 45

2 18,450 8,370 48 15 9,100 4,130 96 29 66 94

3 17,100 7,760 52 16 8,450 3,830 104 32 109 147

4 16,000 7,260 55 17 7,850 3,560 111 34 158 204

5 15,000 6,800 59 18 7,350 3,330 119 36 211 264

6 14,000 6,350 63 19 6,900 3,130 126 38 1,077 329

7 13,270 6,020 67 20 6,540 2,970 134 41 1,301 396

8 12,550 5,700 70 21 6,200 2,810 141 43 1,537 468


HAUL-IN

35.52

22.53

17.66

14.96

12.98

29.00

16.87

11.87

7.3814.75

11.38

35.52 (902)22.53 (572)

17.66 (448)14.96 (380)

12.98(330)

29.0(737)

16.87(428)

11.38 (289)

14.75 (375)7.38 (187)

DIAMOND SCREWDISENGAGED POSITION

DIAMOND SCREWENGAGED POSITION

FREESPOOLINDICATORSWITCH

11.87(302)

1.125(28.5)

HAUL-IN



HOIST

8X Ø .656

LOWERING PORTSAE -16 O-RING BOSS(1 5/16-12 THD.)

CASE DRAIN MUST BEDRAINED BACK TO TANK

HOISTING PORTSAE -16 O-RING BOSS(1 5/16-12 THD.)

Ø 10.63

6.75 13.50 3.84

27.8819.508.38

5.001.66

Ø 20.00

(.63)

(2.82)5.50

11.00

1.75

2.25 16.63

5.25

1.00

21.75(552)10.00

(254)

22.00

12.00

1.38

11.62

6.252.63


8.29(210)

8.38(213)

4.44(113)


PD/d 1 2 3 4 5 6 7 8 9

1/2” 22.0:1 78 163 255 354 460 573 694 822 957**

9/16” 20.0:1 70 147 231 322 420 525 637 756**

5/8” 18.0:1 63 133 210 294 385 483 589**

7/8” * 46 99 159 226 300

1” * 41 89 144 206

1 1/8” * 36 79 129 186

* Recommended for poly rope only. Use poly rope anchor PN. 24413** Does not meet ANSI specifications

LINE PULL

LINE SPEED

ROPE CAPACITY*

LB KG FPM MPM FT M

1 14,500 6,800 200 61 41 12

2 12,400 5,600 234 71 89 27

3 10,800 4,900 269 82 144 44

4 9,600 4,300 303 92 206 63

*Use poly rope anchor PN. 24413

PD15B-41064-046.38 cu in. Motor (104cc)2600 PSI (179 bar) @ 80 gpm (303 lpm)Wire Rope Diameter: 1” Poly Rope


Dimensionals


PD15B-41064-04 Planetary Turret Winch 15,000lb. (6,800kg)

Features• Spring-applied, hydraulically-released parking brake

with more than 3:1 design factor.

• Overrunning clutch to prevent fall-back.

• Patented BRADEN Brake Valve known for precise lowering control.

Dimensionals



Dimensionals


LINE PULL

LINE SPEED

LINE PULL

LINE SPEED

ROPE CAPACITY*

LB KG FPM MPM FPM MPM FPM MPM FT M

1 35,000 15,880 26 8 17,500 7,940 57 17 26 8

2 28,690 13,010 58 18 14,340 6,510 70 21 58 18

3 24,300 11,020 96 29 12,150 5,520 83 25 96 29

4 21,070 9,560 139 42 10,540 4,780 95 29 139 42

5 18,600 8,440 188 57 9,300 4,220 108 33 188 57


HP35A-35102/051-01 10.20/5.10 cu in. 2-Speed Motor (167/84cc) 2750 PSI (171 bar) @ 60 gpm (227 lpm) Wire Rope Diameter: 3/4”


PD/d 1 2 3 4 5 6

5/8” 10.7:1 31 67 109 157 211 271

3/4” 9.0:1 26 58 96 139 188

7/8” 8.0:1 23 51 85 125



HP35A Planetary Recovery Winch 35,000lb (15,880kg)

Features• Sealed two-stage high-effi ciency planetary reduction

gearing provides continuous duty performance for long pulls

• Enclosed oil bath “wet” disc brake for precision load control

• SAE J706 compliance-testedto ensure safe and secure operation


The tension roller system holds the cable close to the drum while in motion to keep the line evenly spooled and prevent most tangles. The optional sensor alerts the operator when only one layer remains on the drum.

Benefits• Saves time by preventing most tangles.

• Promotes even wear on the cable.

• Sensor option improves safety when lowering a load.

• Easy to service and test.

Availabile for the following winch modelsPD15B*Ask about availability on other models.

www.paccarwinch.com Tel 918-251-851116

aDDitional imPortant BumPer information

Capstan Head

Benefits• Easy to attach and remove.

• Easy to operate.

• Easy to store.

Availabile for the following winch modelsHUP12, PD18C, PD35A, PCD24B*Ask about availability on other models.

The Braden Capstan Head attaches to a capstan shaft, allowing for quick recovery of lighter loads.

Utility Accessories

Tension Rollers


17www.paccarwinch.com Tel 918-251-8511 17Tel 918-251-8511

Downward pulls by winch or capstan require additional support by a customer supplied stiff leg to prevent damage to truck suspension and/or bumper. Winch ratings are for the winch, bumper, and mounting brack-ets only and are not necessarily representative of the vehicle frame strength for which BRADEN assumes no liability

CAUTIONWARNING! !

aDDitional imPortant BumPer information

When using a sheave to 2-part line, the effective load on the bumper and truck frame is doubled. Winch pulls using a 2-part line should be horizontal and lim-ited to 15° (degrees) of the vehicle’s horizontal center-line.

CAUTIONWARNING! !

Downward Pulls

2-Part Line or Self-Recovery

www.paccarwinch.com

NOTES:

Find out more about Braden and the full line of PACCAR Winch products at www.paccarwinch.com.

Braden began in 1924 as the Braden Steel Corporation located in Tulsa, Oklahoma.

Owner Glenn Braden, and a handfull of hard working men, supplied drive heads for the booming oil industry.

Braden’s close relationship with oil production and the birth of the American auto industry came together in 1927. Braden developed its first truck mounted winch and the first oil soaked winch safety brake. This innovation set a standard for safety and reliability in the industry.

Today, the Braden tradition lives on with winches and hoists designed to get the job done. Simple, rugged and long-lasting.

®

®

®

800 E DALLAS ST BROKEN ARROW OK U.S.A. 74013 TEL (918) 251-8511/FAX (918) 259-1575

LIT2049 Rev 8 08-2015 (SD) © 2015 PACCAR Inc ALL RIGHTS RESERVED

800 E Dallas St Broken Arrow, OK 74013Tel 918-251-8511 / Fax 918-259-1575www.paccarwinch.com

WINCH

SY

STEM CERTIFICATION

ISO 14001:2004

SY

STEM CERTIFICATION

ISO 9001:2000

utility product guide - buckeye body & equipment

Documents