CURRICULUM VITAE

Name Dr. Pramod Kumar Gupta Date of Birth 12-01-1966 Present Position Professor, Structural Engineering Group Present Address (Office) Civil Engineering Deptt.,

Indian Institute of Technology, Roorkee, (Uttarakhand) INDIA 247667

Area of Research FEA of large deformations (Structural Plasticity), Steel-Concrete Composite (Concrete filled tubes as

structural elements) Ph. D. Thesis Topic An investigation into large deformation behaviour of

metallic tubes. Details of experience Teaching/Research 22 years at both PG and UG level Field/Consultancy 2.5 years Details of the research publications during past five years: (a) Published in Journals International: 61 National: 16 (b) Published in Conferences International: 38 National: 25 Ph.D. thesis supervised seven (5singly guided) + four in progress Ph. D. thesis evaluated five M. E., Dissertation supervised thirty eight + three (in progress) Awards:

Recently Dr. Gupta was awarded with the Endeavour awards of Australian Government.

Details of the sponsored projects: 06 (completed) + 01 (In-progress) Details of the Membership:

Dr. Gupta is life member of the different societies which includes:

• Indian Society for Technical Education, • Institution of Engineers (India), • Applied Mechanics Society, I.I.T. Delhi, • Indian society of Theoretical and Applied Mechanics, • Indian Association for Computational Mechanics, • Indian Society for Construction Materials & Structures, Indian Concrete Institute. • Life Member of Indian society of earthquake technology

Details of the sponsored projects completed in past five years

*

Title Funding agency Amounts In Rs. (Lacs)

Duration

(Years)

Co-worker Status

Computer simulation of large deformation process.

Center for Development of Advanced Computing, (C-DAC) Pune INDIA.

1.5 1.5

Mr. J. P. Mishra

C

Experimental and computational study of large deformations in metallic shells

Ministry of Human Resources Development funded by IIT Roorkee

4.24 3 Nil C

Improvement of earthquake resistance capacity of circular columns

Building Materials & Technology Promotion Council (BMTPC)

11.60 2 Prof. Pradeep Bhargava and Prof. A K Ahuja

C

Numerical & experimental analysis of influence of boundary conditions on deformation of metal plates impacted by projectile.

This is an International project and funded by Department of Science and Technology for funding with a Russian Scientist.

16.58 3 Dr. A Iqbal C

Durability and strength enhancement of reinforced concrete columns using unplasticised poly vinyl chloride (upvc) tubes in ports, harbours and off-shore structures

Ministry o f Shipping 20.28 2 Prof. A K Ahuja

IP

Development of Energy Efficient Construction Materials for Buildings

Building Materials & Technology Promotion Council (BMTPC)

9.96 2 Prof. A K Ahuja (PI) and Dr. Anupam Chakrabarti

IP

USE OF RECYCLED CONCRETE IN PLAIN AND REINFORCED CONCRETE FILLED STEEL TUBULAR COLUMNS

Ministry of Environment and Forest, GOI

22.40 2 Prof. A K Ahuja

Applied

Precast Concrete Columns for Low Cost Housing

Building Materials & Technology Promotion Council (BMTPC)

11.00 2 Prof. Pradeep Bhargava and Prof. A K Ahuja

IP

C- Completed, IP- In progress

Presently working as Editorial board member of the following Journals.

1. Architecture. Construction. Education 2. American Journal of Materials Engineering and Technology 3. American Journal of Civil Engineering and Architecture 4. Journal of Mechanical Design and Vibration 5. Journal of Mechanical and Civil Engineering of International Organization of

Scientific Research 6. i-manager’s Journal of Structural Engineering 7. i-manager’s Journal of Civil Engineering

Reviewer of Research Papers of International Journals:

1. Journal of Material Processing Technology 2. International Journal of Mechanics and Materials in Design, 3. International Journal of Parallel and Distributed Computing 4. Journal of Zhejiang University Science A 5. International Journal of Mechanical Sciences 6. International Journal of Crashworthiness 7. Structural Engineering and Mechanics 8. International Journal of Composite Construction 9. Structural Concrete 10. Latin American Journal of Solids and Structures 11. ACI-Journal of Materials 12. Thin-Walled Structures 13. Journal of Mechanical Design and Vibration 14. i-manager’s Journal of Structural Engineering 15. i-manager’s Journal of Civil Engineering 16. International Journal of Advanced Structural Engineering 17. ACI Journal of Materials 18. International Journal of Impact Engineering 19. Construction and Building Materials 20. Materials and Design

Organisation of Conferences and workshops:

• Organised one Short-term training program on Innovation Methods in Concrete Construction held at IEI Roorkee in 24-25, April 2010.

• Organised one National Conference on Structural Engineering and Mechanics on Sept. 2004.

• Organised a TEQIP course on the topic “Structural Elements Subjected to Extreme Loadings” from March 20 to 24, 2017in Department of Civil Engineering, IIT Roorkee. This course was attended by participants from all over the country and appreciated the course content and lectures delivered by speakers. A total 41 participants attended this course.

• Organised one QIP course on “Wind Resistant Design of Structures” held at QIP centre, IIT Roorkee from 17-21, July 2017.

• Organised a short term course on “Innovation in Concrete repair Technology for Hydraulic Structures” in Continuing Education Centre, IIT Roorkee from 10-14, August 2017.

http://ace-journal.ru/en/about-the-journal/�

Organised four conferences and two workshops in last ten years. Evaluation of dissertation work: Evaluated four doctoral dissertations and many masters dissertations.

Reviewed the books of TMH Publishing Company Limited New Delhi entitled: • Design of steel structures • Finite element Method • Prestressed Concrete- third edition by N Krishna Raju

• Delivered lectures in different technical events for different organizations. Lecture

delivered in the short term program of PRE-ENGINEERED BUILDINGS was appreciated by the field engineers.

• During the teaching of course Prestressed Concrete Structures I realized that analysis of end block in post tensioned prestressed concrete member can be carried out using Finite Element Method also. Therefore, I tried to perform this investigation and successfully completed along-with the publications of four research papers in different International and National conferences. Alongwith the stress analysis of end block I suggested one equation for calculation of Brusting tensile force also in which effect of Poisson ratio is incorporated. This example shows the analytical and research capability of the applicant.

• Conferences/Short term courses/refresher courses conducted:

• Organised one Workshop on Innovation Construction Machinery, Materials and Methods (ICMMM-2015) at IIT Roorkee in 26-27, October 2015 in the banner of Indian Society for Construction Materials and Structures (ISCMS) with support of Department of Civil Engineering, IIT Roorkee. This was attended by more than 200 delegates from different parts of India. The delegates were from academic Institutes, industry, fields Officials and students. I worked as Organizing Secretary of the workshop.

• Organised one Short-term training program on Innovation Methods in Concrete Construction held at IEI Roorkee in 24-25, April 2010. This was attended by more than 180 delegates from different parts of India. The delegates were from academic Institutes, industry, fields Officials and students. I worked as Organizing Secretary of the workshop.

• Organised one National Conference on Structural Engineering and Mechanics on Sept. 2004.

Lectures delivered in different workshops/short term courses etc.

• Delivered a lecture in University of Western Sydney in July 2011, University of Western Sydney, Australia, Australlian Govt.

• Delivered a lecture in National workshop on Quality control through precision equipments-2007 (QCCPE-2007), organized by ISCMS, Roorkee, on Oct., 24-2007.

• Delivered a lecture in in short term program on PRE-ENGINEERED BUILDINGS held at Roorkee-sponsored by BMTPC, Tata Bluescope and other PEB companies on May 20-23, 2008.

• Contributed two chapters out of eleven chapters in the “LECTURE MATERIAL for The National Programme for Capacity Building of Engineers in Earthquake Risk Management (Ministry of Home Affairs, GOI, New Delhi)”. I also taught these chapters.

• Delivered a lecture in in short term program on PRE-ENGINEERED BUILDINGS held at Lonavala -sponsored by BMTPC, Tata Bluescope and other PEB companies on June 10-13, 2008.

• Delivered a invited lecture in National Conference on Technological advances in Civil Engineering (BITCON2008) Bhilai Institute of Technology Durg (MP) Nov., 7-8, 2008.

• Presented a paper entitled “A Study on Mode of Collapse of Metallic Shells Having Combined Tube-Frusta Geometry Subjected to Axial Compression” in ICMIME 2012: International Conference on Mechanical, Industrial, and Manufacturing Engineering, Zurich, Switzerland, January 15-17, 2012

• Delivered many lectures in Short-term training on strength of materials July 2008, Centre for Continuing Education, IIT, Roorkee.

• Delivered many lectures in Short-term training on Computational Mechanics in MNIT Jaipur in April 2013.

• Delivered a lecture on “Use of concrete filled tubes as columns” in Workshop on Innovation methods in concrete construction held between 24-25, April 2010, at IEI Roorkee.

• Delivered a talk in Short-term training program on Innovation Methods in Concrete Construction held at IEI Roorkee in 24-25, April 2010. This was attended by more than 200 delegates from different parts of India. The delegates were from academic Institutes, industry, fields Officials and students. I worked as Organizing Secretary of the workshop.

• Delivered four talks on Earthquake Resistant Structures in a training program Training for Engineers of Rural Engineering Department, Uttar Pradesh held between 24-7-2014 to 26-7-2014 in Continuing Education Centre, IIT Roorkee

• Delivered a talk on topic Perspective Of Concrete Filled Tubular Structure in TEQIP program held in Department of Civil Engineering, IIT Roorkee in December 26-30, December 2015. This was attended by more than about 30 faculty members of different engineering institutes from different parts of India.

• Delivered a talk in Workshop on Innovation Construction Machinery, Materials and Methods (ICMMM-2015) at IIT Roorkee in 26-27, October 2015 in the banner of Indian Society for Construction Materials and Structures (ISCMS) with support of Department of Civil Engineering, IIT Roorkee.

• Delivered the Conference Key Note address on 21st Feb, 2017 in the National Conference on Construction Management, Mechanization and Environmental Sustainability (CMMES 2017) organized by the Department of Civil and Environmental Engineering, Birla Institute of Technology, Mesra, Ranchi during 21-22 Feb, 2017.

• Deliver a invited talk on 22nd Feb, 2017 in the National Conference PEPSCON 2017 (Pre-Engineered and Pre-Cast Concrete Structures) held at TAJ VIVANTA, Dwaraka (Sector-21 Metro Station Complex), New Delhi, India on 21st and 22nd February 2017.

• Delivered a Key Note address on 2nd March, 2017 in the All India Seminar on “Advances in Technology to Mitigate the Effect of Natural Hazards (ATMENH-2017)” organized during March 2-3, 2017 at College of Technology, G. B. Pant University of Agriculture & Technology, Pantnagar (Uttarakhand).

• TEQIP course on the topic “Structural Elements Subjected to Extreme Loadings” from March 20 to 24, 2017 in Department of Civil Engineering, IIT Roorkee.

• Short term course from May 16-18, 2017 at Centre for Continuing Education IITR. A Training Course for the Engineers of Rural Engineering Department, Uttar Pradesh. Two lectures on “Cross drainage structures including bridge super and sub Structures” were deliverd.

• TEQIP Short Term Course on Advances in Structural Engineering from February 20 to 24, 2017 in Department of Civil Engineering, IIT Roorkee Uttar Pradesh.

• TEQIP course on the topic “Structural Elements Subjected to Extreme Loadings” from March 20 to 24, 2017 in Department of Civil Engineering, IIT Roorkee. Topic of talk “Metallic tubes as energy absorbing elements”.

• TEQIP course on the topic “Structural Elements Subjected to Extreme Loadings” from March 20 to 24, 2017 in Department of Civil Engineering, IIT Roorkee. Topic of talk “Concrete filled tubes as structural elements”.

• TEQIP Short Term Course on Advances in Structural Engineering from February 20 to 24, 2017 in Department of Civil Engineering, IIT Roorkee. Two lectures on the topic of “Energy absorbing systems” and “CFST columns” were delivered.

• OTHER ACADEMIC ACTIVITIES:

(a) Awards/ distinctions/ honours/ membership of National Committees

• Secretary of Indian society for construction materials and structures • Executive member of Indian Concrete Institute, India • Visited five institutes as one of the member of National Board of Accreditation

for UG program of Civil Engineering and PG program of Structural

Engineering. The Institutes are: College of Engineering Pune, VJTI Mumbai, NIT Warangal, RKNEC Nagpur, Goka Raju Ranga Raju college of Engineering Hyderabad on different durations.

Details of the theses supervision Ph. D.

Name of the

Student Thesis Title Degree

awarded Co-

supervisor Ram ranjan Sahu

Large deformations of metallic shell structures August 2013 Nil

N K Bhatnagar

Effects of geometrical shapes on wind loads on buildings

Dec. 2012 A K Ahuja

Rajendra N Khapre

Application of Parallel Computing in Finite Element Analysis of Two-Dimensional Small and Large Deformations

May 2006

Nil

Ziyad Abdulnabi Khaudhatr

Structural Behaviour of Recycled Concrete Filled Tubular Columns

October 2014

A K Ahuja

Heavan Singh

Behaviour of Concrete Filled Steel Tubular Columns with different Cross-sections

May 2015 Nil

Virendra Kumar Verma

Study of Concrete filled UPVC tubes subjected to axial compression

July 2015 Nil

Gaurav Tiwari Numerical and Experimental analysis of influence of boundary conditions of deformation of metal plates Impacted by projectiles

January 2015 Md. Ashraf Iqbal

S K Katariya Study of Concrete filled tubes as structural elements

July 2012/Ongoing/QIP

Nil

M. E./M. Tech. S. No.

Name of the Student

Thesis Title Completed in Year

Co-supervisor

1 L Jaideep Study of large deformations using Finite Element Method

Dec. 2001 Nil

2 Kiran Kumar Reddy C

Finite element analysis (FEA) in plasticity problems of energy absorbing devices

Dec 2002 Nil

3 Sunil C Kalepu Automatic mesh generation for plane problems Dec 2002 Nil 4 C H V

Veerabhadram Study of Stresses and Strains in Plastic regions May 2004 Nil

5 M Sampath Kumar

Experimental and Computational Study of CFT using Self Compacting Concrete

May 2005 Nil

6 Sunil M Sarda Experimental and Computational Study of CFT using High Performance Concrete

May 2005 Nil

7 M. D. Noman Parametric studies of Intze tank June 2007 Vipul Prakash

8 T N Gupta CAD package for design of column and its footings

June 2007 V K Gupta

9 K G babu Mathematical modeling of delamination in composite plates

June 2007 S Chakraborty

10 Anil Mishra Finite Element analysis of box girder bridges June 2007 K K Singh

11 Sharad Sharma Seismic soil-structure interaction in building on hilly slopes

June 2008 A D Pandey

12 Y C Singh Studies in steel encased RC columns June 2008 J Prasad

13 Pravin S Agashe Flexural behavior of concrete filled tubes June 2008 Nil

14 Pardeep Singh Parametric study of concrete filled tubular columns

June 2009 Nil

15 Vishal S Deore Finite Element Investigation of behavior of spaced plates subjected to projectile impact

June 2009 M A Iqbal

16 Lt. Col. Harsh raghuvanshi

Studies on concrete filled circular PVC tubes as column

June 2010 V K Gupta

17 Sanjay Kumar Tak

Numerical simulation of the influence of target span and boundry condition on the ballistic limit

June 2010 A Iqbal

18 Rajiv Gandhi M Experimental estimation of wind loads on multi-span pitched roof buildings

June 2010 A K Ahuja

19 B Gopikrishna Behaviour of structural elements under high strain rate

June 2011 M A Iqbal

20 M Devakinandan

Experimental investigation into circular tubes with concrete infills

June 2011 J Prasad

21 Nabam Ajay Experimental investigation into circular tubes with fibre-based concrete infills

June 2011 J Prasad

22 Nagaraju Lakumalla

Study of reinforced cement concrete filled UPVC pipes as columns

June 2012 Nil

23 Golla Ramesh

Experimental investigation into behavior of concrete filled PVC tubes

June 2012 Nil

24 Neelam Rani Experimental evaluation of wind loads on canopy roofs

June 2013 A K Ahuja

25 Amit Agrawal Experimental investigation of wind loads on hoardings

June 2013 A K Ahuja

26 Shiva Effects of steps on wind loads on tall buildings June 2013 A K Ahuja

27 Ritesh Bhatia Study of Engineering properties of recycled concrete aggregate concrete

June 2013 Nil

28 Saurabh Dutt

Concrete filled steel tubes columns and its evolutionStudies in steel encased RC columns

June 2014 Nil

29 Tamanari Varahala Babu

Analysis of Concrete Filled Reinforced Concrete Pipes As Tubular Columns

June 2014 S Ray

30 Nadeem Ahmad Experimental study of Pressure Concrete pipes filled with concrete to be used as columns

June 2015 Nil

31 Shashank Shekhar Singh

Study of development of strains during expansion of metallic tubes using DIC

June 2015 Nil

32 Mohd Nusrutullah Khan

Experimental study of development of confinement in Concrete Filled steel tubes subjected to axial compression

June 2015 Nil

33 Adarshbir Singh Investigation of Concrete Filled Tubes as Columns

June 2016 Nil

34 Chandrabhan Singh

Proportioning of Ingredients of Recycled Aggregate Concrete

June 2016 Nil

35 Vishal Kumawat

Study of Concrete filled Tube (CFT) Beams June 2016 Nil

B.Tech Project

S. No.

Name of the Student Thesis Title

Completed in Year

Co-supervisor

1 Balavenkatesh G

Energy absorbing capacity of metallic devices using ANSYS

May2003 Nil

2 S R Rapolu, B S Harsha, K N Reddy and G Jain

Modifying pavement characteristics using crushed concrete

June 2008

Rajat Rastogi

3 S MNV and S Verma

Design of grade-separated pedestrian facility at an intersection

June 2008 S S Jain M Parida

4 Pratima Singh and Shubham Singh

Experimental study on concrete filled circular upvc tubes

June 2012 Nil

Details of the research publications: (a) Published in Journals

Details of the research publications:

(a) Published in Journals

International:

1. Gupta N. K., Sekhon, G. S. and Gupta P. K. “A study of fold formation in axisymmetric axial collapse of round tubes", International Journal of Impact Engineering, 27 (2002), pp. 87-117. (Impact factor (IF) = 1.195), Total Citation 6

2. Gupta N. K., Sekhon, G. S. and Gupta P. K. “A study of lateral collapse of square and rectangular metallic tubes", International Journal of Thin-Walled structures, 39 (2001), pp. 745-772. (IF = 0.694), Total Citation 2

3. Sekhon, G. S., Gupta N. K. and Gupta P. K. “An analysis of external inversion of round tubes”, International Journal of Materials Processing Technology, 133 (2003) pp 243-256. (IF = 0.615), Total Citation 30

4. Gupta N. K., Sekhon, G. S. and Gupta P. K. “Study of lateral compression of round metallic tubes", International Journal of Thin-Walled structures, 43 (2005) pp 895-922. (IF = 0.694), Total Citation 4

5. Gupta P. K. and Gupta N. K. “Multiple barrelling in axial compression of cylindrical tubes ", Latin American Journal of Solids and Structures, 2 (2005) pp 195-217.

6. Gupta P. K. and Khapre R. N., “Finite Element Analysis of metal forming problems using parallel computing technique” International Journal for Computational Methods in Engineering Sciences & Mechanics 7:1-11, (2006). Total Citation 2

7. Gupta P. K. and Gupta N. K. “Computational and experimental studies of crushing of metallic hemispherical shells” Archive of Applied Mechanics (2006) 76: 511–524. (IF = 0.5), Total Citation 1

8. Gupta P. K. and Gupta N. K. “An experimental and computational study of crushing of metallic hemispherical shells between two rigid flat platens” Journal of Strain Analysis for Engg. Design Vol. 41, No. 6, (2006) pp 453-466. (IF = 0.409), Total Citation 1

9. Gupta P. K., Sarda S. M. and Sampath Kumar M. “Experimental and Computational study of Concrete filled round tubular columns under axial loads” Journal of Construction Steel research-An International Journal, 63 (2007) 182–193. (I F = 0.7, 2006), Total Citation 24

10. Gupta P. K. and Khapre R. N., “Finite Element Analysis of Anchorage Zone Using Supercomputer” Asian Journal of Civil Engineers 9, No 1 (2007) 31–43.

11. Gupta P. K. “A study of axial compression of metallic thin walled conical shells", International Journal of Thin-Walled structures, 46 (2008) pp 561-571.

12. Gupta P. K. and Gupta N. K. “A study of axial compression of metallic hemispherical domes” International Journal of Materials Processing Technology, 209 (2009) pp 2175-2179. (IF = 0.409), Total Citation 7

13. Gupta P. K. Singh K. K. and Mishra A “Parametric Study on Behaviour of Box-girder Bridges Using Finite Element Method” Asian Journal of Civil Engineering (Building and housing) vol. 11, no. 1 (2010)PAGES 135-148

14. Chakrabarti, P.K. Gupta, S. Chakraborty and K. G. Babu “Modeling of Delamination in FRP Laminated Composites” AMSE periodicals on Modelling, Measurement and Control (Series B: Mechanics and Thermics), Vol. 78, issue 2 6, (2009) pp 47-63.

15. R N Khapre and P K Gupta “Finite Element simulation of nosing of tubular circular metallic tubes using parallel computing” Advanced Materials Research Vols. 264-265 (2011) pp 1604-1612.

16. P K Gupta “A Study on Mode of Collapse of Metallic Shells Having Combined Tube-Frusta Geometry Subjected to Axial Compression” International Journal of Mechanical and Aerospace Engineering 6 2012 pp 64-68.

17. P K Gupta “A study on inversion of metallic thin walled conical shells” International Journal of Crashworthiness 2011. (IF = 0.409), Total Citation 2.

18. M.A. Iqbal, P.K. Gupta, V.S. Deore, S.K. Tak, G. Tiwari, N.K. Gupta “Effect of target span and configuration on the ballistic limit” International Journal of Impact Engineering, Volume 42, April 2012, Pages 11-24. (IF = 0.409), Total Citation .

19. R R Sahu and P K Gupta “Studies on Geometrical Featured Metallic Shell Structures for Inward Inversion” INTERNATIONAL JOURNAL OF CIVIL ENGINEERING AND TECHNOLOGY (IJCIET), 3:2 2012 pp 251-264.

20. R R Sahu and P K Gupta “Comparative Large Deformations Studies on Circular Tubes” International Journal of Civil and Structural Engineering volume 3, no 2, 2012, doi:10.6088/ijcser.201203013035, Integrated publishing services, issn 0976 – 4399.

21. Sahu RR and Gupta PK (2013). Geometrical metallic shell behavior study under compression. International Journal of Advanced Structural Engineering. 5:5 2013 pp 1-12.

22. Sahu RR and Gupta PK (2013). Experimental and numerical studies on various section geometries for inward inversion. International Journal of Scientific & Technology Research volume 2, issue 2, February 2013, ISSN 2277-8616.

23. M. A. Iqbal, G. Tiwari, P. K. Gupta “Response of 1100-H12 Aluminum Targets to Varying Span and Configuration” Key Engineering Materials Vols. 535-536 (2013) pp 539-542.

24. P. K. Gupta, M. A. Iqbal, G. Tiwari, N. K. Gupta “Effect of Configuration and Target Span on the Ballistic Resistance” Key Engineering Materials Vols. 535-536 (2013) pp 52-55.

25. P K Gupta and N K Gupta “A study on axial compression of tubular metallic shells having combined tube–cone geometry” Thin-Walled Structures 62 (2013) 85–95.

26. Heaven Singh and P. K. Gupta “Numerical Modeling of Rectangular Concrete-Filled Steel Tubular Short Columns” International Journal of Scientific & Engineering Research Volume 4, Issue 5, May-2013 pp 170-173.

http://www.sciencedirect.com/science/article/pii/S0734743X11001722�http://www.sciencedirect.com/science/article/pii/S0734743X11001722�

27. Ziyad A. Khaudhair, P. K. Gupta, A. K. Ahuja “Parametric Investigations on Behaviour of Square CFST Columns” International Journal of Scientific & Engineering Research Volume 4, Issue 5, May-2013 pp 107-110.

28. P. K. Gupta, V. K. Verma, H. Singh, Z. Kubba and Nabam Ajay “Ductility and Energy Absorbing Capacity of Concrete Filled UPVC Tubes” International Journal of Construction Materials and Structures Volume 1, No. 1, April 2013 pp 1-10.

29. Gupta PK and Sahu RR (2013). “Inward Inversion Studies on the Stepped Shape Frusta” Advances in Structural Engineering- International Journal Vol. 16 No. 11 2013 pp. 1871-1884.

30. P K Gupta and R R Sahu “Experimental and numerical studies on the tube contraction using a conical-cylindrical die” Journal of Strain Analysis and Design, Volume 48 Issue 8 November 2013 pp. 482 - 493.

31. Gupta, P. K., Khaudhair, Ziyad A., and Ahuja, A. K. Computational study on performance of Circular Concrete Filled Steel Tubular (CCFST) columns. Int. J. Structural Engineering, Vol. 5, No. 1, 2014. pp. 76-91.

32. Gupta, P. K. “Confinement of concrete columns with unplasticized Poly-vinyl chloride tubes” International Journal of Advanced Structural Engineering 2013, 5:19 (30 August 2013).

33. Sahu RR and Gupta PK (2013). “Blast Diffusion by Different Shapes of Vehicle Hull" International Journal of Automotive Engineering and Technologies Vol. 2, Issue 4, pp. 130 – 139, 2013.

34. G. Tiwari, M. A. Iqbal and P. K. Gupta “Influence of Target Convexity and Concavity on the Ballistic Limit of Thin Aluminum Plate against by Sharp Nosed Projectile” International Journal of Engineering Research and Technology. Volume 6, Number 3 (2013), pp. 365-372.

35. Gupta P. K. and Khapre R. N., “Cluster Computing in Finite Element Programing to Study the Large Deformation Problems” International Journal of Innovation in Science and Mathematics Volume 2, Issue 1, 2014, ISSN (Online): 2347–9051, pp. 53-60.

36. Sahu RR and Gupta PK "Studies on Geometrical Metallic Frusta for Inward Inversion by Finite Element Simulation" Accepted in press International Journal of Computer Aided Engineering and Technology.

37. G Tiwari, MA Iqbal, PK Gupta, NK Gupta The ballistic resistance of thin aluminium plates with varying degrees of fixity along the circumference International Journal of Impact Engineering 74, 46-56 (2014).

38. PK Gupta, VK Verma Study of concrete-filled unplasticized poly-vinyl chloride tubes in marine environment Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment (2014).

39. PK Gupta, H Singh Numerical study of confinement in short concrete filled steel tube columns Latin American Journal of Solids and Structures 11 (8), 1445-1462 (2014).

40. RR Sahu, PK Gupta Improvement of crush can configuration International Journal of Crashworthiness 19 (6), 600-612 (2014).

41. PK Gupta, AK Ahuja, ZA Khaudhair Modelling, verification and investigation of behaviour of circular CFST columns Structural Concrete 15 (3), 340-349 (2014).

42. PK Gupta Numerical Investigation of Process Parameters on External Inversion of Thin-Walled Tubes Journal of Materials Engineering and Performance 23 (8), 2905-2917 (2014).

https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:JV2RwH3_ST0C�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:JV2RwH3_ST0C�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:cFHS6HbyZ2cC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:cFHS6HbyZ2cC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:hMod-77fHWUC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:hMod-77fHWUC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:2P1L_qKh6hAC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:j3f4tGmQtD8C�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:j3f4tGmQtD8C�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:O3NaXMp0MMsC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:O3NaXMp0MMsC�

43. PK Gupta, NK Gupta A study of different modes of collapse in metallic hemispherical shells resting on flat platen and compressed with hemispherical nosed indenter International Journal of Solids and Structures 51 (13), 2518-2528 (2014).

44. G Tiwari, MA Iqbal, PK Gupta Effect of Periphery Fixity on Ballistic Limit of Thin Aluminum Plate Subjected to Blunt and Ogival Projectile Impact International Journal of Applied Mechanics and Engineering 19 (2), 379-395 (2014).

45. PK Gupta, SK Katariya Effect of cross-section on flexural capacity of square concrete-filled steel tube (CFST) beams Int J Appl Eng Res 9 (7), 783-789 (2014).

46. P.K. Gupta, V.K. Verma, Ziyad A. Khaudhair and Heaven Singh Effect of tube area on the behavior of concrete filled tubular columns Computers and Concrete, Vol.15, No.2 141-166 (2015).

47. MA Iqbal, G Tiwari, PK Gupta, P Bhargava Ballistic performance and energy absorption characteristics of thin aluminium plates International Journal of Impact Engineering 77, 1-15 (2015).

48. RR Sahu, PK Gupta Blast Diffusion by Different Shapes of Domes Defence Science Journal 65 (1), 77-82 (2015).

49. PK Gupta, SK Katariya Effect of Concrete Strength on Bending Capacity of Square and Rectangular CFST Elements Advances in Structural Engineering, 2117-2129 (2015).

50. PK Gupta, VK Verma, Study of concrete-filled unplasticized poly-vinyl chloride tubes in marine environment, Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, vol 230, issue 2, pp. 229-240. 2016.

51. Gupta, Pramod K; Khaudhair, Ziyad A; Ahuja, Ashok K; A new method for proportioning recycled concrete. Structural Concrete, 17(4), pp. 677-687, 2016.

52. Mohammad, Zaid; Gupta, PK; Iqbal, MA; Baqi, Abdul; Energy Absorption in Metallic Targets Subjected to Oblique Impact, Procedia Engineering. Vol. 173, pp145-152, 2017.

53. Gupta, Pramod Kumar; Sahu, Ram Ranjan; Large Deformation Studies on Combined Shell Structures Procedia Engineering 173 pp. 1700-1707, 2017

54. Tiwari, G; Iqbal, MA; Gupta, PK; Influence of Target Span and Boundary Conditions on Ballistic Limit of Thin Aluminum Plate Procedia Engineering, 173, pp.169-174, 2017

55. Gupta, PK; A Study on Analysis of Collapse of Metallic Shells having Dome-cone Shape Procedia Engineering, 173, pp.1708-1715, 2017.

56. Gupta, PK; Iqbal, MA; Mohammad, Zaid; Baqi, Abdul; Gupta, NK; Energy absorption in thin metallic targets subjected to oblique projectile impact: A numerical study Thin-Walled Structures, 2017.

57. MA Iqbal, G Tiwari, PK Gupta, P Bhargava Energy dissipation in thin metallic shells under projectile impact, European Journal of Mechanics-A/Solids 59, 37-57 (2016).

58. PK Gupta, MA Iqbal, Z Mohammad,. Energy dissipation in plastic deformation of thin aluminum targets subjected to projectile impact., International Journal of Impact Engineering, Online available 2017.

59. PK Gupta, NK Gupta,. A study of development mode of collapse with variation of strains and stresses during compression of metallic shells having dome-cone shape., Thin-Walled Structures, Online available 2017.

60. G Tiwari, MA Iqbal, PK Gupta,.Energy absorption characteristics of thin aluminium plate against hemispherical nosed projectile impact., Online available Thin-Walled Structures, 2017.

https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:GnPB-g6toBAC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:GnPB-g6toBAC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:GnPB-g6toBAC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:g5m5HwL7SMYC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:g5m5HwL7SMYC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&citation_for_view=xX9wCQcAAAAJ:ldfaerwXgEUC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&citation_for_view=xX9wCQcAAAAJ:ldfaerwXgEUC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:dfsIfKJdRG4C�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:dfsIfKJdRG4C�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:bFI3QPDXJZMC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:a0OBvERweLwC�https://scholar.google.com/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:a0OBvERweLwC�https://scholar.google.co.in/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:cFHS6HbyZ2cC�https://scholar.google.co.in/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:cFHS6HbyZ2cC�https://scholar.google.co.in/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:OU6Ihb5iCvQC�https://scholar.google.co.in/citations?view_op=view_citation&hl=en&user=xX9wCQcAAAAJ&cstart=20&citation_for_view=xX9wCQcAAAAJ:OU6Ihb5iCvQC�https://scholar.google.com/scholar?oi=bibs&cluster=16407833977822344861&btnI=1&hl=en�https://scholar.google.com/scholar?oi=bibs&cluster=16407833977822344861&btnI=1&hl=en�https://scholar.google.com/scholar?oi=bibs&cluster=3311508685986612017&btnI=1&hl=en�https://scholar.google.com/scholar?oi=bibs&cluster=3311508685986612017&btnI=1&hl=en�https://scholar.google.com/scholar?oi=bibs&cluster=1199190467447214925&btnI=1&hl=en�https://scholar.google.com/scholar?oi=bibs&cluster=1199190467447214925&btnI=1&hl=en�

61. Gupta PK and Sahu RR,. A study on mechanics of collapse of combined geometry metallic shells. Thin-Walled Structures, Online available 2017.

National:

1. Gupta P. K. and Khapre R. N. “An Efficient Parallel Solver using Matrix Inversion Method for Linear and Non-linear Finite Element Problems”, Journal of The Institution of Engineers (India) Vol 86 (May 2005) pp 44-48. Total Citation 4.

2. Gupta P. K., Gupta N. K. and Sekhon G. S. “Finite element analysis of collapse of metallic tubes” Defense Science Journal (May 2008) pp 44-48. (I F = 0.172).

3. Gupta P. K. and Khapre R. N., “Analysis of anchorage zone by finite element method on windows NT Cluster” Icfai Journal of Structural Engineering, Vol II No. 3 July 2009.

4. P. K. Gupta “Study of behaviour of concrete filled tubular columns using finite element analysis” INSDAG Steel Journal, vol. 11, No. 2 pp 69-75 July 2010.

5. P K Gupta, J Prasad and Y C Singh “Study on strength and ductility of Concrete Filled Steel Tubular Short Columns under Concentric Loading” Journal of Structural Engineering, SERC Vol. 38, No. 5, December 2011-January 2012 pp. 439-447.

6. P. K. Gupta and H Raghuvanshi “A study on load carrying capacity of circular concrete filled tubular columns” Institute for Steel Development & Growth (insdag’s) Steel in Construction Journal vol. 13, no. 1, 2012, pp39-46.

7. Sahu RR and Gupta PK (2012). “Studies on large deformation behavior of geometrical metallic frusta by finite element simulation” Journal of Structural Engineering, SERC no. 320(28/b)/2013.

8. P K Gupta “Concrete Filled Tubes: A More Logical Composite Column” Special issue Nirma Sarika a NEWS letter of BMTPC Vol. 1, issue 3 July-September 2012, New Delhi, pp 28-31.

9. Amit Agrawal, Ashok K. Ahuja and Pramod K. Gupta “Effects of wind incidence angle on wind loads on hoardings” J. Acad. Indus. Res. Vol. 1(11) April 2013, pp 706-708.

10. Shiva, Ashok K. Ahuja and Pramod K. Gupta “Wind loads on Tall Buildings with Steps” J. Acad. Indus. Res. Vol. 1(12) May 2013, pp 766-768.

11. Neelam Rani, Ashok K. Ahuja and Parmod K. Gupta “ Wind pressure distribution on Flat Canopy roofs” J. Acad. Indus. Res. Vol. 1(12) May 2013, pp 771-773.

12. Gupta P. K., Bhatia R. "Study of Engineering Properties of Recycled Concrete Aggregate Concrete" i-manager’s Journal on Structural Engineering, Vol. 2, No. l, March - May 2013 pp 20-26.

13. P.K. Gupta and Heaven Singh, “Study of recycled aggregate concrete filled steel tubular metallic composite columns” Institute for Steel Development & Growth (insdag’s) Steel in Construction Journal vol. 13, no. 1, 2012, pp39-46.

14. P. K. Gupta, V. K. Verma, M. Devakinandan, A. K. Ahuja “Experimental Study on Axially Loaded Unplasticised Poly Vinyl Chloride (UPVC) Concrete Filled Tubes” Indian Concrete Institute Journal, Vol. 14, No. 2, July-September 2013, pp 45-49.

15. Gupta P. K., Gupta N. K. “Investigation of external inversion of thin-walled tubes” Proc Indian National Science Academy 79 No. 4 December 2013 Spl. Issue, Part A, pp. 679-685.

16. Sahu RR and Gupta PK Bullet Speed Attenuation on Different Shape of Domes” Accepted in press i-manager’s Journal on Structural Engineering,

(b) Published/Communicated in Conferences/Symposiums International:

1. Gupta P. K., Gupta N. K. and Sekhon, G. S. “Experimental and computational investigation of lateral compression of round metallic tubes”, published in International Conference on Mathematical modelling of non-linear systems held in Dec. 2000 at Indian Institute of Technology Kharagpur INDIA, pp 251-258.

2. Gupta N. K., Gupta P. K. and Sekhon, G. S. “Investigation of lateral compression of metallic tubes”, published in 44th Indian Society for Theoretical and Applied Mechanics Congress- An International Meet Sivakashi INDIA, pp. 121-128.

3. Gupta P. K., Gupta N. K. and Sekhon G. S., “A Study of Large Deformation Behaviour of Square and Rectangular Metallic Tubes Subjected to Lateral Compression”, published in International Conference on Advances in Civil Engineering (ACE2002) held between 3-5 January 2002 at Indian Institute of Technology Kharagpur, INDIA pp 1201-1210.

4. Gupta P. K., Sekhon G. S. and Gupta N. K., “Finite Element Simulation of External Inversion of a Round Tube”, published in International Conference on Advances in Civil Engineering (ACE2002) held between 3-5 January 2002 at Indian Institute of Technology Kharagpur, INDIA, pp 1290-1298.

5. Gupta P. K., Sekhon G. S. and Gupta N. K., “ A Study of Collapse of Metallic Tubes in context of Energy Absorbing Devices”, published in Symposium on Large Deformation (ON 60th Birthday of Professor Narinder Kumar Gupta) held on 1st September at Indian International Centre Delhi, INDIA pp 7-8.

6. Gupta P. K., Gupta N. K. and Sekhon G. S., “ Study of Lateral compression of Square and Rectangular Metallic Tubes”, published in Plasticity and Impact mechanics Proceedings of 8th International Symposium on IMPLAST2003 held between 16-19 March 2003 at Indian Institute of Technology Delhi, INDIA pp 519-527.

7. Gupta P. K. and Khapre R. N., “Finite Element Analysis of Anchorage Zone Using Supercomputer PARAM 10000” Structural Engineering Convention (SEC 2003) - 12-14th December 2003 held at IIT Kharagpur, INDIA pp. 465-475.

8. Gupta P. K. and Khapre R. N., “Comparative study of solution methods of system of linear equations on Super Computers” Structural Engineering Convention (SEC 2003) - 12-14th December 2003 held at IIT Kharagpur, INDIA pp. 522-530.

9. Gupta P. K. and Khapre R. N., “An application of cluster computing for finite element analysis” published in the proceedings (in CD) of Structural Engineering Convention (SEC 2005), held at Indian Institute of Science Bangalore 14th-16th December 2005.

10. Gupta P. K., Sekhon G. S. and Gupta N. K., “Collapse Behaviour Of Metallic Tubes In Context Of Energy Absorbing Devices” published in the proceedings (in CD) of Structural Engineering Convention (SEC 2005), held at Indian Institute of Science Bangalore 14th-16th December 2005.

11. Gupta P. K. and Khapre R. N., “Finite Element Simulation of Nosing of Metallic Circular Tubes” International congress on Computational Mechanics and Simulations (ICCMS 06) - 8-10th December 2006 held at IIT Guwahati, INDIA pp. 893-898.

12. Gupta P. K., Sekhon G. S. and Gupta N. K., “Effect of increasing plate thickness on its mechanics of deformation under projectile impact”, published in Plasticity and Impact mechanics 9th International Symposium (IMPLAST’07), which was held in August 2007 at Ruhr-University Bochum, Germany.

13. P. K. Gupta, V. K. Gupta and H Raghuvanshi “A Study on load carrying capacity of circular CFTs using six International design methods” published in 4th International Conference on Steel & Composite Structures Wednesday 21 – Friday 23 July 2010 Sydney, Australia.

14. P. K. Gupta, P Singh “Study of concrete filled tubular columns using finite element analysis” published in 4th International Conference on Steel & Composite Structures Wednesday 21 – Friday 23 July 2010 Sydney, Australia.

15. P. K. Gupta “A Study On Axial Compression Of Metallic Thin Walled Conical Shells” shall be published in ICTACEM 2010 FIFTH INTERNATIONAL CONFERENCE ON THEORETICAL, APPLIED, COMPUTATIONAL AND EXPERIMENTAL MECHANICS to be held at IIT Kharagpur between DECEMBER 27-29, 2010.

16. P. K. Gupta H Raghuvanshi, and V. K. Gupta “Study on Concrete Filled Unplastisized PolyVinyl Chloride Tubes (CFUTs) as columns” shall be published in ICTACEM 2010 FIFTH INTERNATIONAL CONFERENCE ON THEORETICAL, APPLIED, COMPUTATIONAL AND EXPERIMENTAL MECHANICS to be held at IIT Kharagpur between DECEMBER 27-29, 2010.

17. N K Bhatnagar, P K Gupta and A K Ahuja “Effect of building shape on wind loads on tall buildings” to be published in International conference on Innonative world of Structural Engineering (ICIWSE-2010) held in Dec. 2010 at Govt. College of Engg. Aurangabad pp 618-625.

18. P.K. Gupta, S.K. Tak and M.A. Iqbal,” Effect of Target Span and Projectile Nose Shape on the Ballistic Resistance” published in IMPLAST 2010 SEM 2010 Fall Conference October 12-14, 2010 Renaissance Providence Hotel Providence, Rhode Island USA.

19. P K Gupta “Axial compression of tubular metallic shells having conical geometry” published in proceedings of the The 6th International Conference on Thin Walled Structures ICTWS2011 Conference, Timisoara, Romania, 5-7 September 2011.

20. P K Gupta “Axial Compression Of Tubular Metallic Shells having combined tube-frusta geometry” published in proceedings of the International Conference on Structural Engineering, Construction and Management" (ICSECM) 2011 which was held between 15-17, December 2011 at Earl's Regency Hotel, Kandy, Sri Lanka.

21. P K Gupta “A Study on Mode of Collapse of Metallic Shells Having Combined Tube-Frusta Geometry Subjected to Axial Compression” WASET 2012, ICMIME 2012: International Conference on Mechanical, Industrial, and Manufacturing Engineering held in Geroldswil Swiss Quality Hotel Huebwiesenstrasse 36 Geroldswil , Zurich, Switzerland Switzerland during January 15-17, 2012.

22. P.K. Gupta, Ziyad A. Khaudhair and A.K. Ahuja “A study on load carrying capacity and behaviour of concrete filled steel tubular members subjected to axial compression” published in The 11th International Conference on Concrete Engineering and Technology 2012(CONCET 2012) held at Centre for Innovative Construction Technology (CICT) Dept. of Civil Engineering Faculty of Engineering University of Malaya 50603, Kuala Lumpur, MALAYSIA between 12-13 June 2012.

23. Gupta P. K., Verma V.K., Ajay N., and Ahuja A.K. “A Study On The Behavior Of Axially Loaded Unplasticised Poly Vinyl Chloride (UPVC) Concrete Filled Tubes” Fourth International Conference on Structural Stability and Dynamics (ICSSD 2012), 4–6 January, 2012 held at Malaviya National Institute of Technology, Jaipur & Texas A&M University, USA pp. 662-667.

24. Gupta P. K and Singh Heaven “Numerical study of tubed concrete filled short columns” the 5th International Conference of Asian Concrete Federation (ACF2012) October 24-26, 2012 Amari Orchid Hotel Pattaya, Chonburi, Thailand Organized by Asian Concrete Federation Thailand Concrete Association Faculty of Engineering, Chulalongkorn University Sirindhorn International Institute of Technology, Thammasat University.

25. Khaudhair, Ziyad A., Gupta, P. K., and Ahuja, A. K. Analytical investigation of Axially Loaded Concrete Filled Steel Tubular Columns. In 8th Biennial Conference on Structural Engineering Convention , Applied Mechanics Department, S.V. National Institute of Technology, Surat-395 007, Gujarat, India, 713-719.

26. Gupta, P. K., Khaudhair, Ziyad A., and Ahuja, A. K. 3D Numerical simulation of concrete filled steel tubular columns using ANSYS. In Innovations in Concrete Constructions (Jalandhar, India 2013), Concrete Congress,UKIERI, 2262-2271

27. Heaven Singh, P.K. Gupta and Ziyad A.K.R. Kubba” Numerical Modeling of Rectangular Concrete-Filled Steel Tubular Short Columns” published in International Conference on Innovations in Civil Engineering 9th and 10th of May 2013held at Kerala.

28. Ziyad A. Khaudhair, P. K. Gupta, A. K. Ahuja “Parametric Investigations on Behaviour of Square CFST Columns” published in International Conference on Innovations in Civil Engineering 9th and 10th of May 2013held at Kerala.

29. Gupta P. K., Singh H. and Ahuja A. K. “Behavior Of Tubular Metallic Composite Columns Filled With Recycled Aggregate Concrete” published in the proceedings Edited by Siamak Yazdani and Amarjit Singh of Seventh International Structural Engineering and Construction Conference (ISEC-7), held on the campus of the University of Hawaii at Manoa, Honolulu, from June 18-23, 2013, pp. 517-522.

30. P. K GUPTA and V .K. VERMA. “A STUDY ON MODELING OF CONFINEMENT IN RC COLUMNS” Paper No. SECM/15/158, 6th International Conference on Structural Engineering and Construction Management 2015, held in Kandy, Sri Lanka from 11th to 13th December 2015.

31. Zaid Mohammad, P. K. Gupta, M. A. Iqbal “Energy Absorption in Metallic Targets Subjected to Oblique Impact”, 11th International Symposium on Plasticity and Impact Mechanics, Implast 2016 held at IIT delhi in December 2016.

32. P. K. Gupta, R. R. Sahu “Large Deformation Studies on Combined Shell Structures”,11th International Symposium on Plasticity and Impact Mechanics, Implast 2016 held at IIT delhi in December 2016.

33. P. K. Gupta “A study on analysis of collapse of metallic shells having dome-cone shape”,11th International Symposium on Plasticity and Impact Mechanics, Implast 2016 held at IIT delhi in December 2016.

34. Tiwari, G; Iqbal, MA; Gupta, PK; Influence of Target Span and Boundary Conditions on Ballistic Limit of Thin Aluminum Plate”,11th International Symposium on Plasticity and Impact Mechanics, Implast 2016 held at IIT delhi in December 2016.

National:

1. Gupta P. K., Gupta N. K. and Sekhon, G. S., “A study of axial collapse of round tubes” published in 11th ISME, Conference 3-5 Feb. 1999, IIT, Delhi, pp 416-424.

2. Sekhon, G. S., Gupta N. K., and Gupta P. K., “Study of Axi-symmetric multiple barrelling mode of collapse of a round tube subjected to axial compression”

published in 12th Indian Society of Mechanical Engineers Conference held on Jan. 2001 at Crescent Engineering College Chennai, INDIA, pp 208-216.

3. Gupta P. K., Khapre R. N. “Study of Anchorage zone in Post-tensioned Concrete Beams Using Finite Element Method”, published in National Conference on Advances in Civil Engineering Perspectives of Developing Countries (ACEDEC-2003) held in 15-16 Feb. 2003 at H. B. T. I. Kanpur pp 122-131.

4. Gupta P. K., Nandha S. R. K., Bharatwaj V., Shriram R. and Mishra P. K., “Behavior of tubular metallic composite columns filled with concrete made up of recycled aggregate” Second conference on disaster management case histories, 14-16 Nov. 2003, held at Birla Institute of Technology and Science Pilani, INDIA

5. Gupta P. K. and Khapre R. N., Sinhal A. A., Veerabhadram C. V. “Information technology in disaster management: Tools and applications” Second conference on disaster management case histories, 14-16 Nov. 2003, held at Birla Institute of Technology and Science Pilani, INDIA.

6. Gupta P. K., Sekhon, G. S. and Gupta N. K., “Study of projectile Impact on Metallic Plates” published in 13th ISME, Conference 30-31 Dec. 2003, IIT, Roorkee Proceedings was published in CD Rom.

7. Gupta P. K., Mishra J. P., Khapre R. N. and Jain P. K. “Comparison of C and FORTRAN 77 Languages based on their performance on PARAM 10000”, published in National Conference on Distibuted Computing (NCDC-2004) held in 6-7 March 2004 at NMAM Institute of Technology Udupi Karnataka, pp 33-42.

8. Gupta P. K., Khapre R. N. and Sinhal A., “Analysis of Splitting Zone in Prestressed Post-tensioned Concrete Beam Using Supercomputer PARAM 10000” Structural Engineering and Mechanics (SEM-04)- 24-25 September 2005 held at BITS Pilani, pp 167-172.

9. Gupta P. K. and Gupta N. K. and Sekhon G. S., “A Study Of Collapse Of Metallic Tubes In Context Of Energy Absorbing Devices” published in the proceedings (in CD) of Indian Society of Mechanical Engineers conference held at Delhi College of Engineering, Delhi 12th-14th December 2005, paper no. 300.

10. Gupta P. K. and Khapre R. N., “Simulation of lateral compression of rectangular tubes on supercomputer PARAM 10000” published in the proceedings of National Conference on “Advances in Mechanical Engineering” (AIME-2006) which was held at Jamia Millia Islamia, New Delhi, January 20-21, 2006.

11. Gupta P. K. and K Marttand., “Cost comparison of RCC columns and concrete filled tubes” published in the proceedings of the National Conference on “Earthquake Disaster: Technology and Management”-2006 which was held at Motilal Nehru National Institute of Technology, Allahabad, February 11-12, 2006, pp VI22-24.

12. Khapre R. N. and Gupta P. K. “Simulation of Axial compression of Round Metallic Tube on Supercomputer PARAM 10000” published in the proceedings of Fourth National Seminar on Aerospace Structures (XIV NASAS) held at Visvesvaraya National Institute of Technology, Nagpur 30-31 January 2006, pp 447-453.

13. Gupta P. K. and Khapre R. N. “Finite Element Modeling of circular tube subjected to axial compression between Flat and curved surface dies” published in the proceedings (in CD, paper No. RP22) of National Conference on Rapid Prototyping Applications held at Visvesvaraya National Institute of Technology, Nagpur 10-11 March 2006, pp 47.

14. Gupta P. K., Sarda S. M. and Sampath Kumar M "Concrete filled long columns subjected to axial loads" Proceedings of the National Conference on High-Rise Buildings: Materials and Practices, held at New Delhi 30-31 Oct. 2006, pp 353-361.

15. Singh K K, Gupta P K and Shivaria A “Analysis of skew slab railway bridges” accepted in National symposium on " Recent Advances and future trends in design and construction of bridges" to be held at Hyderabad in April, 2008.

16. Gupta P K, Singh K K and Mishra A “Parametric study of Box-girder Bridge using Finite Element Method” accepted in National symposium on " Recent Advances and future trends in design and construction of bridges" to be held at Hyderabad in April, 2008.

17. Gupta P. K., Prasad J and Singh Y C “Experimental studies on concrete filled steel tubular short columns under concentric loading” published in Structural Engineering Convention held at IIT Chennai in Dec. 2008.

18. Gupta P K “An investigation into large deformation behaviour of metallic shells subjected to axial compression” delivered as keynote lecture in National Conference on Technological advances in Civil Engineering (BITCON2008) held between Nov. 7-8, 2008 at Bhilai Institute of Technology Durg (MP).

19. P.K. Gupta “Use of Concrete Filled tubes in sustainable construction” delivered a key note paper in all India Seminar on Emerging and Sustainable Techniques in Civil Engineering held between October 18-19, 2010 at College of Technology and Engineering Udaipur.

20. N K Bhatnagar, P K Gupta and A K Ahuja “Wind Resistant design of tall buildings” published in 4th CUSAT National Conference on Recent Advances in Civil Engineering (RACE 2010) held between Sept., 16-18 2010 at Cochin University of Sci. and Tech. Cochin pp 111-116.

21. P.K. Gupta, N. Lakumalla, G. Ramesh, A.K. Ahuja,P. Bhargava and S.K. Agrawal “An Experimental Investigation on Confinement of Concrete with Poly-Vinyl Chloride Pipes “Twenty-eighth NCCE & National Seminar on Role of Infrastructure for Sustainable Development held on 12-14, Oct. 2012 organised by The Institution of Engineers (India), Roorkee Local Centre, IIT Roorkee Campus, published in proceedings pp 259-265.

22. P.K. Gupta, G. Ramesh, N. Lakumalla, A.K. Ahuja,P. Bhargava and S.K. Agrawal “A Study on Suitability of Concrete Filled UPVC Pipes as Columns “Twenty-eighth NCCE & National Seminar on Role of Infrastructure for Sustainable Development held on 12-14, Oct. 2012 organised by The Institution of Engineers (India), Roorkee Local Centre, IIT Roorkee Campus, published in proceedings pp 266-273.

23. P.K. Gupta,and Heaven Singh “Analytical Study of Concrete-Filled Tubes in Axial Compression” Twenty-eighth NCCE & National Seminar on Role of Infrastructure for Sustainable Development held on 12-14, Oct. 2012 organised by The Institution of Engineers (India), Roorkee Local Centre, IIT Roorkee Campus, published in proceedings pp 274-280 Best paper Award.

24. Ram Ranjan Sahu and Pramod Gupta “Large Deformation Curl out Study on Geometrical Shell Models” Twenty-eighth NCCE & National Seminar on Role of Infrastructure for Sustainable Development held on 12-14, Oct. 2012 organised by The Institution of Engineers (India), Roorkee Local Centre, IIT Roorkee Campus, published in proceedings pp 325-333 Best paper Award..

25. Ziyad A. Khaudhair, P.K. Gupta, and A.K. Ahuja “Passive Confinement to Enhance Ductility and Compressibility of Concrete” Twenty-eighth NCCE & National Seminar on Role of Infrastructure for Sustainable Development held on 12-14, Oct. 2012 organised by The Institution of Engineers (India), Roorkee Local Centre, IIT Roorkee Campus, published in proceedings pp 286-392.

26. Khaudhair, Ziyad A., Gupta, P. K., and Ahuja, A. K. Modeling and Simulation of Composite Steel-Concrete Columns for High Rise Buildings. In National Conference on Emerging Trends of Energy Conservation in Buildings (Roorkee-India 2012), CSIR-Central Building Research Institute, 352-359.

27. Tiwari, G., Iqbal, M. A., Gupta, P. K., 2012. Influence of Target to Projectile Diameter Ratio on the Ballistic Limit, Proc. ACMFMS 2012, 767-770, IIT Delhi, India

28. Gupta, P. K., Tiwari, G., Iqbal, M. A., Gupta, N. K., 2013. Effect of Target to Projectile Diameter Ratio (D/d) on the Ballistic Limit, Topical Problems in theoretical and applied mechanics, 232-239.

29.

Details of the Research reports

1. Gupta P. K. and Mishra J. P., “Computer simulation of large deformation process” A Research report submitted to Center for Development of Advanced Computing, (C-DAC) Pune INDIA, Dec. 2004, total pages 76.

2. Gupta P. K. “Experimental and computational study of large deformations in metallic shells” A Research report submitted to MHRD through Dean SRIC, IIT Roorkee.

3. Gupta P. K., Ahuja A. K. and Bhargava P. “Improvement of earthquake resistance capacity of circular columns” A Research report submitted to Building Materials & Technology Promotion Council (BMTPC), New Delhi.

4. Gupta P. K. and Iqbal A. “Numerical & experimental analysis of influence of boundary conditions on deformation of metal plates impacted by projectile” A draft Research report submitted to DST, New Delhi.

(a) Published in Journals International: 61 National: 16(b) Published in Conferences International: 38 National: 25Thesis TitleThesis TitleThesis Title(a) Published in JournalsDetails of the research publications:

(a) Published in Journals(b) Published/Communicated in Conferences/Symposiums