dräger mrv 9000 rescue and shelter systems - draeger · the dräger mrv 9000 is the answer in an...
TRANSCRIPT
The Dräger MRV 9000 is the answer in an ever-changing mining environment. This robust vehicle extends the mission time for mines rescue teams by providing safe transportation closer to the incident.Innovative and customer driven – this Mine Rescue Vehicle is a unique solution in the field of mines rescue worldwide.
Dräger MRV 9000Rescue and Shelter Systems
D-4
0448
-201
5
Fire extinguishing system
Communication system
Escape hatch
Air-tight driver’s cabin and cassette
Chassis
Air purging system with metering panel
02 | Dräger MRV 9000
Benefits
Developed for challenges in an ever-changing mining environment
The Dräger Mine Rescue Vehicle (MRV) is an innovative solution based on the needs of an ever-changing mining environment. Mines evolve, they expand and get deeper, they move further from the portal. Mines rescue teams now have longer distances to travel before they arrive at the location of the emergency and only a limited amount of time is available with the breathing apparatus. The Dräger MRV 9000 exactly targets this challenge by providing safe transportation as close as possible to the incident without needing to activate the breathing apparatus. Consequently, the mine rescue teams have more time for their on-site mission.
cut out
D-4
1445
-201
5
Gas detection system
Stretcher to allow transportation
of injured miners
Air purging system with metering panel
Air conditioning units
Trailer hitch
Ergonomically designed seats allow wearing of breathing apparatus
Breathing air storagewith hydraulic lift for fast set-up
Dräger MRV 9000 | 03
Independent from ambient air Both the driver’s cabin and cassette are equipped with an air purging system. This system is independent of the ambient air and provides breathing air for the onboard personnel. Once the team has exited the vehicle equipped with personal breathing protection, the air flow in MRV 9000 can be manually reduced for the remaining occupants. As a result, breathing air from the onboard cylinders can be conserved to provide additional time for the overall mission. Once the team returns to the MRV 9000 and the driver’s cabin and cassette have been successfully flushed, their individual breathing apparatuses are no longer required.
Monitoring system for safety underground
External and internal gas monitoring reliably measures the concentrations of oxygen, carbon dioxide and carbon monoxide in the ambient air and inside the vehicle. If thresholds are exceeded or fall short, the onboard personnel will be warned by visual and acoustic signals. Additionally, the measurement values are clearly visible in the front and in the rear of the vehicle. Thermal imaging cameras installed outside of the vehicle support the orientation in a dusty, smoky environment and can help detect trapped miners.
Combined expertise
The chassis of the Mine Rescue Vehicle has been designed by Paus, a renowned vehicle manufacturer specializing in mining applications. The chassis is well-tested, strong and robust for harsh underground mine conditions. In addition, cooperation with a specialized manufacturer enables low maintenance efforts as Paus only uses components from other specialized mining industry suppliers. By combining the knowledge and expertise of Paus together with the well-known competence of Dräger in the field of rescue and refuge solutions, breathing protection and gas monitoring, the MRV 9000 provides both quality and industry-specific design.
Customer driven
Close cooperation with our customers initiated and drove the development of a mine rescue solution based on the current and future challenges of a mine. The in-depth knowledge of our customer together with our competences made it possible to not only develop a mine rescue vehicle, but to create a customer driven innovative solution. Each component of the mine rescue vehicle mirrors the needs of the mine rescue team in deeper and longer mines taking mines rescue into the twenty-first century.
Benefits
04 | Dräger MRV 9000
Dräger PSS® BG 4 plus
Designed especially for tough missions: The Dräger PSS® BG 4 plus closed circuit breathing apparatus combines uncompromising safety with the highest level of breathing and carrying comfort. The unit supplies the wearer with up to four hours of breathing air, even in toxic atmospheres.
D-9
8783
-201
3
Dräger MRC 5000
During an emergency, Dräger mine refuge chambers provide mining personnel both shelter and breathing protection with the highest quality and safety standards. The robust and highly portable construction, as well as a low cost of maintenance, makes them ideally suited for diverse underground conditions.
Dräger ChargeAir system
The Dräger ChargeAir system opens up a new opportunity to enhance self-escape and first response capability of underground personnel. It offers good communication possibilities and allows the simultaneous charge of up to five SCBAs in minutes.
Dräger Oxy 3000/6000
Thanks to the robust and state-of-the art design, the Dräger Oxy 3000/6000 ensures not only immediate oxygen supply for up to 30 or 60 minutes upon donning, but also a ten-year service lifetime without additional testing and maintenance.
D-4
2461
-201
5D
-512
4-20
14D
-351
21-2
011
Related products
Dräger MRV 9000 | 05
Dräger air purging system
The air purging system provides positive pressure inside the cassette and cabin to prevent the ingress of harmful substances. Hazardous substances are purged and breathing air flushes into the vehicle. The air purging system consists of a high pressure breathing air storage, air management panels and positive pressure relief valves. The Dräger air management panels are used to adjust the flow of breathing air according to the number of personnel. The positive pressure as well as the flow of purged air can be monitored with gauges.
D-4
3249
-201
5
Breathing air storage
The air needed to breath, to provide a positive pressure environment and to purge hazardous substances is stored in a verticle rack. The cylinders can be changed in a short period of time with an integrated hydraulic lift.
Electrical system / Power supply
The electrical system controls the distribution of electrical power to all sub-systems. These include: the lighting, the digital gas monitors, and as an option: power for the thermal imaging cameras and the intercom. The electrical power supply is provided from the vehicle’s battery system.
D-4
2462
-201
5D
-432
53-2
015
Standard System Components
Dräger X-am® 7000 digital gas monitor
The Dräger X-am® 7000 monitors the gas inside the cassette and the driver’s cabin. The air is monitored for concentration of O2, CO2 and CO. Written instructions inside the cassette give clear information which steps are to be taken in case the recommended thresholds are exceeded or not achieved.
ST-6
5-20
06
06 | Dräger MRV 9000
Air conditioning
The air conditioning system contributes to the safety of persons since the regulation of body temperature may be affected by high humidity. The inner unit in the cassette consists of two sub-units, each for cooling and heating.
Communication system
An optional intercom system for private communication between the crew in the front cabin and the team in the cassette can be integrated.
D-4
3249
-201
5
Standard System Components
Thermal imaging cameras and monitoring
Externally installed thermal imaging cameras help the team to orientate in a dusty and smoky surrounding. Screens inside the vehicle visualize the surroundings on screens inside and support the detection of trapped miners. Two screens can be installed in the cabin and an additional screen in the cassette. Moreover, temperature sensors installed outside the vehicle give further insights into the surrounding.
External gas monitoring
A set of four sensors on the outside of the vehicle continuously monitor the lower explosive levels (LEL) and the O2, NO2 and CO gas levels. These values are visible for all occupants of the vehicle.
Optional System Components
Dräger MRV 9000 | 07
Technical dataAmbient temperature -20 to 45 °C / -4 °F to 113 °FAir conditioning in the cassette 15 to 30 °C / 59 °F to 86 °FInternal gas detection and CO, CO2, O2, temperature, humidity climate monitoringDimensions of the vehicle Height 2,570 mm / 8 ft 5.2 in Width 2,200 mm / 7 ft 2.6 in Length 5,760 mm / 18 ft 11 in Operating weight Approx. 9 t Doors on cassette One backdoor for main entrance One emergency door on the roofDoors on driver’s cabin Driver and passenger door Persons in cassette 4 persons rescue staff in cassette 3 patients (1 lying) Persons in driver’s cabin 2 persons (1 driver, 1 rescue staff)
Air purging system 2 x integrated cylinder rack units liftable for 3 x 6,000 PSI /43 lt. steel cylinders (DOT)Exchangeable in max. 45 minutes
Mission scenario*Operation time 5 hours Travel in: 1.5 hours 4 persons rescue staff in cassette 1 person rescue staff and 1 driver in the cabin Mission: 2 hours 1 driver in the cabin with overpressure system / next to the cabin with BG4 5 persons rescue staff with BG4 Travel out: 1.5 hours 4 persons rescue staff in cassette 1 person rescue staff and 1 driver in the cabin 3 patients in the cassette (1 lying) Purging capacity 3 times purging of cabin and cassette (possible additional purging reduces operation time of the vehicle)Recharge time Maximum 45 minutes * exemplary
Technical data: Casette
08 | Dräger MRV 9000
Technical data: Chassis
Technical data Payload Maximum 2 t Engine versions Deutz, TDC 2012/L04 2V Power 96 KW Chassis Rigid frame chassis Drive Hydrostatic, hydrodynamic Axles Planetary and steering axles with internal wet disc brakes Types 9.00-20 Speed 33 km/h Climbing power 60 %
appr
ox. 3
00
appr
ox. 2
,140
700 3,260 1,800
5,760
appr
ox. 2
,570
approx. 4,300
r approx. 3,700
r approx. 6,950
appr
ox. 4
,300
2,200
90 7
2 40
3 |
15.0
8-1
| C
omm
unic
atio
ns &
Sal
es M
arke
ting
| PP
| L
E |
Prin
ted
in G
erm
any
| Pa
pier
san
s ch
lore
, non
pol
luan
t | S
ous
rése
rve
de m
odifi
catio
ns |
© 2
015
Drä
gerw
erk
AG &
Co.
KG
aA
12 | Dräger MRV 9000
Notes
CORPORATE HEADQUARTERSDrägerwerk AG & Co. KGaAMoislinger Allee 53–5523558 Lübeck, Germany
www.draeger.com
Manufacturer (Cassette):Dräger Safety AG & Co. KGaARevalstraße 123560 Lübeck, Germany
Manufacturer (Chassis):Hermann Paus Maschinenfabrik GmbHSiemensstrasse 1-948488 Emsbüren, Germany
REGION CENTRAL AND SOUTH AMERICADräger Panama S. de R.L.Complejo Business Park, V tower, 10th floorPanama CityTel +507 377-9100Fax +507 [email protected]
CANADADraeger Safety Canada Ltd.2425 Skymark Avenue, Unit 1Mississauga, Ontario, L4W 4Y6Tel +1 905 212 6600Toll-free +1 877 Drager 1 (+1 877 372 4371)Fax +1 877 651 0902Toll-free Fax +1 800 329 8823
REGION MIDDLE EAST, AFRICADräger Safety AG & Co. KGaABranch Office P.O. Box 505108 Dubai, United Arab EmiratesTel +971 4 4294 600Fax +971 4 4294 [email protected]
REGION ASIA PACIFICDraeger Safety Asia Pte Ltd25 International Business Park#04-20/21 German CentreSingapore 609916Tel +65 6308 9400Fax +65 6308 [email protected]
REGION EUROPE CENTRAL AND EUROPE NORTHDräger Safety AG & Co. KGaA Revalstraße 123560 Lübeck, GermanyTel +49 451 882 0Fax +49 451 882 [email protected]
REGION EUROPE SOUTHDräger Safety France SAS25, rue Georges Besse92182 Antony CedexTel +33 1 46 11 56 00Fax +33 1 40 96 97 [email protected]
REGION NORTH AMERICADraeger Safety, Inc.101 Technology DrivePittsburgh, PA 15275Tel +1 412 787 8383Fax +1 412 787 [email protected]
Locate your Regional Sales Representative at: www.draeger.com/contact