Materials Needed:#71365132 Sterling Silver Flower Stud with Loop#71365155 Sterling Silver Dragonfly Charm#71365009 Sterling Silver 4mm Open Jump Rings#71365037 Sterling Silver 1 1/4” Head Pin#71365024 Sterling Silver 1” Eye Pin#71365096 Sterling Silver 4mm Stardust Round#71365019 Sterling Silver 18” Link Chain#7122110 Crystazzi® 6mm Aquamarine Bicone#7122115 Crystazzi® 6mm Erinite Bicone#7127311 Crystazzi® 6mm Cobalt Bicone

Tools:Round Nose Pliers #4458Wire Cutters #4457

Techniques to Know:Form a Wrapped LoopOpening Jump Rings

Directions:Cut 2-12 link lengths of link chain. These form the base that the drops will 1. be clustered onto.Lay out your head pins threaded with beads. Four of each color will be 2. used for one earring.The bicone drops are connected to the chain using wrapped loops for 3. a very secure hold. Remember to leave the tail end of the head pin out straight and uncut. Thread the tail onto a chain link until the loop sits directly on the chain. Finish the wrapped loop process.Attach the aquamarine drops at the top of the chain, the erinite drops in 4. the middle and the cobalt drops on the lower portion of chain.Use a 4mm open jump ring to attach the dragonfly to the last link of 5. chain.Using an eye pin thread on one sterling silver stardust bead and form a 6. wrapped loop, attaching the loop to the earring before completing the wrapped portion of the loop. Open the bottom loop of the stardust link to connect to the top link of 7. chain.Repeat steps for the second earring.8.

x8 x8 x8

Skill Level: Easy - No Experience NecessaryApproximate Crafting Time: 20 minutesCopyright 2010 Prima Bead ™ visit www.primabead.com

Dragonfly Earrings