ductile manhole covers gully gratings ......manufacturers of ductile iron, highway and municipal...
TRANSCRIPT
R&B UK JT LimitedCourt 2000, Bridgnorth Road, Madeley, Telford, Shropshire, TF7 4JB P R O D U C T C ATA LO G U E
Manufacturers of Ductile Iron, Highway and Municipal Access Covers & Gratings.
The information given in this literature is, to the best of our knowledge, correct at the time of going to print. However, R&B UK JT Ltd is constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any data changed contained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request.
Tel: +44 (0) 1952 580 554Fax: +44 (0) 1952 580 527Email: [email protected] www.randb-uk.com
R&BUKJT/01/2015/V8
I S S U E 8
D U C T I L E M A N H O L E C O V E R S
G U L LY G R AT I N G S
C O M P O S I T E C O V E R S
D U C T A C C E S S C H A M B E R S
P O R O U S PAV I N G
M O D U L A R M A N H O L E L A D D E R
AT T E N UAT I O N C R AT E S
Based in Telford, Shropshire we are ideally situated to access all major
motorway networks and operate a nationwide delivery service from
single items to full loads.
We offer a complete range of municipal castings in Grey and Ductile
iron, together with a full range of Fabricated Steel access covers and
ladders, continuous ducting, stainless steel and brass finished items.
All items are fabricated to customer’s drawings or purpose-designed
to suit on-site applications.
PRODUCT CERTIFICATION AND QUALITY ASSURANCE
Our Comprehensive range of Ductile Iron Castings Includes IMPACT ( HA104/09), Classic and bespoke design products manufactured to
clients specification.
We have products available to BS EN124:1994 B125, C250, D400 and E600 loadings. This range is further complimented with our fully certified
grey iron A15 products, for light duty applications. We also operate an audited and accredited ISO9001:2008 Quality Management System to
ensure our products are of the highest quality possible. CE Marked product will be available following the harmonisation and publication of
the newly revised EN124 when ratified.
ESTABLISHED IN 1988, R&B UK JT LTD ARE SPECIALIST
MANUFACTURERS AND DISTRIBUTORS OF ACCESS COVERS,
GULLY GRATINGS AND FRAMES.
32
INTRODUCTION Classification 4
Technical Details & Features 5
GROUP 1 A15 – Manhole Covers and Frames 6
GROUP 2 B125 – Manhole Covers and Frames 7
GROUP 3 C250 - Manhole Covers and Frames 8
GROUP 4 D400 - Manhole Covers and Frames 9
D400 – Gully Gratings and Frames 10
Surface Boxes 11
GROUP 5 E600 Covers and Gratings 11
OTHER ITEMS Telecommunication Covers 12
TUFTAC Tuftac Covers 13
SOLID TOP Fabricated Solid Top Covers 14
Sealing Plates & Safety Grids 14
SPECIALIST Recessed Steel Covers & Frames 15
Brass & Stainless Material Products 16
Miscellaneous 17
COMPOSITE Compass Composite 18
FIRMGROUND Firmground Ground Mat 48 / 70 19
COMPASS ESTATE 20
21
COMPASS HIGHWAY 22
23
COMPASS ADD-A-STEP™ 24
25
AQUACRATE Aquacrate 2 and Aquacrate 4 26
Facta Classification Table 27
Our highly-experienced sales staff have an in-depth knowledge of
a very broad spectrum of Grey/Ductile Iron and Fabricated Steel
Products in general, and we are confident that any enquiry can be
dealt with to your total satisfaction.
We are currently supplying products into European and Middle East
markets and offer a full export quotation service from containerised/
conventional shipment to any International destination
TECHNICAL DETAILS & FEATURES
CLASSIFICATION
BS EN 124 The selection of the appropriate class is the responsibility of the designer. When in doubt the stronger class should be selected.
GROUP CLASS
1 min .Class A15 Areas which can only be used by pedestrians and pedal cyclists.
2 min .Class B125 Footways, pedestrian areas and comparable areas, car parks or car parking areas.
3 min .Class C250For gully tops installed in the area of kerbside channels of roads (fig 1) which when
measured from the kerb edge, extend a maximum of 0.5m into the carriageway and a maximum or 0.2m into the footway.
4 min .Class D400 Carriageway roads (including pedestrian streets), hard shoulders (fig 1 & 2) and park-ing areas for all types of road vehicles.
5 min .Class E600 Areas imposing high wheel loads eg. Docks and aircraft pavements
6 min .Class F900 Area imposing particualry high wheel loads, eg aircraft pavements.
• Double Triangular - Covers comprising of two triangular elements for the purpose of providing stable seating under load and
convenience of lighter weight due to slip cover configuration
• Clear Opening - The nominal unobstructed access opening in a frame, neglecting minor intrusions such as the corner seatings of
some rectangular frames.
• Watertight - Proof against the passage of surface water of a minimal depth and at atmospheric pressure.
• Pressure Tight - Proof against the escape of fluids/gases at a specified pressure.
• Recessed Cover - Cover recessed to accept the insertion of chosen material usually to match the surrounding area.
• Ventilated - Cover and/ or frame provided with opening to allow free circulation of air within the chamber.
• Safety Grid - A fabricated steel grid housed under a cover when installed to hold an accidentally dropped cover.
• Sealing Plate - Galvanised steel or GRP located under the cover to provide additional protection against the sand/silt etc.
• Prising Slot - Recesses to receive a prising bar for the purpose of loosening a cover prior to lifting
• Frame Bearing Area - The surface of the underside of the frame which rests upon the supporting structure.
• Nominal Bearing Pressure - The bearing pressure calculated by dividing the test load (BS EN 124) by the Frame Bearing Area.
• Single Seal - Vertical relationship between a cover edge and frame with the bottom sitting in the seal as shown in detail
• Double seal - Duplicate vertical relationship between a cover edge and frame with the bottom sitting in the seal as shown in detail
• Plain Seated - Not sealed, but jointed contact between a cover edge and frame
• Keyholes - Closed keyholes prevent ingress of water and debris and escape of odours, open keyholes do not.
• Locking - Either screwed down or fitted with a turn buckle system to deter unauthorised lifting.
• Loosely coupled - Two halves of a double triangular cover are loosely coupled to prevent separation when lifting yet allow
permitted deflection under traffic loads.
• Seating - The bearing surface between the cover and frame.
• Waterway - The drainage area of a gully grating in square centimetres.
TECHNICAL DETAILS & FEATURES
optional optional
optional optional
optional optional
optional optional
optional optional
Suitable for use in domestic areas used by pedestrians and pedal cyclists.
Suitable for use in car parks and areas of slow moving access to light commercial vehicles.
Suitable for use where continuous high levels of fast-moving traffic are present.
Suitable for areas subject to slow moving heavy loadings. eg industrial premises.
Includes a security locking feature to deter unauthorised access including high security options.
Suitable for use in conditions of heavy traffic eg: main city streets and roads.
optional optional
(For Access Covers Only)Includes a feature which reduces egress of unwanted odours, gases and the ingress of water.
54
ICON DETAILS
optional optional
WHAT IS DUCTILE IRON Ductile iron is not a single material but is part of a group
of materials which can be produced to have a wide range
of properties through control of the microstructure. The
common defining characteristic of this group of materials is
the morphological structure of the graphite. In ductile irons,
the graphite is in the form of spherical nodules rather than
flakes (as in grey iron), thus inhibiting the creation of cracks and
providing the enhanced ductility that gives the alloy its name.
The formation of nodules is achieved by addition of nodulizing
elements, most commonly magnesium.
WHY WE USE DUCTILE IRON
Ductile iron offers superior hardness and durability when
compared to grey iron as well as offering a high strength to
weight ratio allowing producers to manufacture lightweight
castings that can allow for 50% weight saving over traditional
grey iron castings. All of this therefore minimises the risk to the
user as the castings are easier and lighter to handle and with
an ever changing marketplace that specially requires less risk to
the manual user and installer ductile iron is the perfect material
to use. Ductile iron also offers a component that reduces the
possibility of breakages and failure when installed and in transit,
we see these points as key features as it offers the customer a
high quality of material and less risk compared to the use of
other metals.
GROUP 1
Areas which can only be used by pedestrians and pedal cyclists
PRODUCT CODE PRODUCT NAME CLEAR OPENING (MM) OVER BASE (MM) COVER DEPTH (MM)
1020D EASTNOR 600 x 450 680 x 545 Single Seal, Solid Top 30
1021D BEESTON 600 x 600 690 x 690 Single Seal, Solid Top 30
BESPOKE OPTIONS
• Locking (security or standard screws)• Double seal (neoprene rubber seal)• Badging • Venting
FEATURES: Single seal frame BS EN124 Class A15 Grey Iron for durability and strength Black coated finish OPTIONS: Badged SW or FW Locking screws Neoprene seal Ventilated Safety Grid Sealing plate
EASTN
OR
A
15 BS EN
124
600 x 450 clear opening x 30 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1020D Eastnor 600 x 450 695 x 545 30 EN124 Access Covers and Frames: A15 Group 1 A15 access covers and frames are designed for use in pedestrian and pedal cycle areas only.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Single seal frame BS EN124 Class A15 Grey Iron for durability and strength Black coated finish OPTIONS: Badged SW or FW Locking screws Neoprene seal Ventilated Safety Grid Sealing plate
BEESTO
N
A15 B
S EN124
600 x 600 clear opening x 30 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1021D Beeston 600 x 600 690 x 690 30 EN124 Access Covers and Frames: A15 Group 1 A15 access covers and frames are designed for use in pedestrian and pedal cycle areas only.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
PRODUCT CODE PRODUCT NAME CLEAR OPENING (MM) OVER BASE (MM) COVER DEPTH (MM)
3001D PPIC 450 Dia 550 Dia Single Seal, Solid Top 40
1014D DENBIGH 450 x 450 520 x 520 Single Seal, Solid Top 45
1006D CHIRK 600 x 450 675 x 520 Single Seal, Solid Top 40/75
1005D RAGLAN 600 x 600 665 x 665 Single Seal, Solid Top 40/75
1004D LIFFEY 600 Dia 700 x 700 Single Seal, Solid Top 75
1010D RHUDDLAN 750 x 600 840 x 695 Single Seal, Solid Top 45
1016D STIRLING 675 x 675 760 x 760 Single Seal, Solid Top 45
1080D KENILWORTH 750 x 750 850 x 850 Single Seal, Solid Top 45
1008D CONWAY 900 x 600 1024 x 724 Single Seal, Solid Top 45
1015D WARWICK 900 x 900 1010 x 1010 Single Seal, Solid Top 50
1028D LUDLOW 1220 x 675 1345 x 800 Single Seal, Solid Top 50
BESPOKE OPTIONS
• Locking (security or standard screws)• Double seal (neoprene rubber seal)• Badging • Venting
FEATURES: Single seal frame BS EN124 Class B125 Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Locking screws Neoprene seal
Designed to compliment standard Polypropylene 450mm diameter inspection chambers.
PPIC
B125 B
S EN124 K
ITEMA
RK
ED
450 diam
eter clear opening x 32 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 3001D PPIC 450 diameter 550 diameter 32 EN124 Access Covers and Frames: B125 B125 access covers and frames are designed for use in pedestrian areas subject to occasional vehicular traffic or pavements where kerb mounting in common. All B125 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Single seal frame BS EN124 Class B125 Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
DEN
BIG
H
B125 B
S EN124 K
ITEMA
RK
ED
450 x 450 clear opening x 45 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1014D Denbigh 450 x 450 575 x 575 45 EN124 Access Covers and Frames: B125, Group 2 B125 access covers and frames are designed for use in pedestrian areas subject to occasional vehicular traffic or pavements where kerb mounting in common. All B125 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Single seal frame BS EN124 Class B125 Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
CH
IRK
B125 B
S EN124 K
ITEMA
RK
ED
600 x 450 clear opening x 40 or 75 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1006-40 Chirk 600 x 450 670 x 520 40 1006-75 Chirk 600 x 450 670 x 520 75 EN124 Access Covers and Frames: B125, Group 2 B125 access covers and frames are designed for use in pedestrian areas subject to occasional vehicular traffic or pavements where kerb mounting in common. All B125 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Single seal frame BS EN124 Class B125 Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
RA
GLA
N
B
125 BS EN
124 KITEM
AR
KED
600 x 600 clear opening x 40 or 75 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1005D Raglan 600 x 600 670 x 670 40 1005D75 Raglan 600 x 600 670 x 670 75 EN124 Access Covers and Frames: B125, Group 2 B125 access covers and frames are designed for use in pedestrian areas subject to occasional vehicular traffic or pavements where kerb mounting in common. All B125 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Single seal frame BS EN124 Class B125 Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
RH
UD
DLA
N
B
125 BS EN
124 KITEM
AR
KED
900 x 600 clear opening x 45 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1010 Rhuddlan 750 x 600 820 x 670 45 EN124 Access Covers and Frames: B125, Group 2 B125 access covers and frames are designed for use in pedestrian areas subject to occasional vehicular traffic or pavements where kerb mounting in common. All B125 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Single seal frame BS EN124 Class B125 Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
STIRLIN
G
B125 B
S EN124 K
ITEMA
RK
ED
675 x 675 clear opening x 40 or 75 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1016D Stirling 675 x 675 745 x 745 40 1016D75 Stirling 675 x 675 745 x 745 75 EN124 Access Covers and Frames: B125, Group 2 B125 access covers and frames are designed for use in pedestrian areas subject to occasional vehicular traffic or pavements where kerb mounting in common. All B125 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Single seal frame BS EN124 Class B125 Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
KEN
ILWO
RTH
B125 B
S EN124 K
ITEMA
RK
ED
750 x 750 clear opening x 45 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1080D Kenilworth 750 x 750 840 x 840 45 EN124 Access Covers and Frames: B125, Group 2 B125 access covers and frames are designed for use in pedestrian areas subject to occasional vehicular traffic or pavements where kerb mounting in common. All B125 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Single seal frame BS EN124 Class B125 Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
WA
RW
ICK
B
125 BS EN
124 KITEM
AR
KED
900 x 900 clear opening x 50 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1015D Warwick 900 x 900 1015 x 1015 50 EN124 Access Covers and Frames: B125, Group 2 B125 access covers and frames are designed for use in pedestrian areas subject to occasional vehicular traffic or pavements where kerb mounting in common. All B125 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
optional optionaloptional optionaloptional optional optional optionaloptional optionaloptional optional
A15
GROUP 2
Suitable for use in domestic areas with occasional light vehicular access.B125
76
GROUP 4
Areas subject to fast moving traffic, so it is recommended in motorway application 150mm frame is specified. D400
FEATURES: End Hinged for ease of gully maintenance BS EN124 Class C250 Bolt down option Ductile Iron for lightweight and high strength Black coated finish
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1027D Ruthin 365 x 310 515 x 405 75 EN124 Access Covers and Frames: C250, Group 3 C250 gully gratings and frames are designed for use in car parks, industrial or commercial areas carrying slow moving traffic. All C250 manhole gratings and frames are certified to the requirements of BS EN124.
RU
THIN
C250 B
S EN124 K
ITEMA
RK
ED
365 x 310 clear opening x 75 deep
© 2005, R&B UK JT Limited.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Single seal frame BS EN124 Class C250 Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
BR
ECO
N
C
250 BS EN
124 KITEM
AR
KED
450 x 450 clear opening x 45 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1013d Brecon 450 x 450 600 x 600 45 EN124 Access Covers and Frames: C250, Group 3 C250 access covers and frames are designed for use in car parks, industrial or commercial areas carrying slow moving traffic. All C250 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Single seal frame BS EN124 Class C250 Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
AC
TON
C250 B
S EN124 K
ITEMA
RK
ED
600 x 450 clear opening x 45 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1012d Acton 600 x 450 750 x 600 45 EN124 Access Covers and Frames: C250, Group 3 C250 access covers and frames are designed for use in car parks, industrial or commercial areas carrying slow moving traffic. All C250 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Single seal frame BS EN124 Class C250 Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
FLINT
C
250 BS EN
124 KITEM
AR
KED
600 x 600 clear opening x 45 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1011D Flint 600 x 600 750 x 750 45 EN124 Access Covers and Frames: C250, Group 3 C250 access covers and frames are designed for use in car parks, industrial or commercial areas carrying slow moving traffic. All C250 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Single seal frame BS EN124 Class C250 Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
MO
RETO
N
C250 B
S EN124 K
ITEMA
RK
ED
750 x 600 clear opening x 50 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1009D Moreton 750 x 600 900 x 750 50 EN124 Access Covers and Frames: C250, Group 3 C250 access covers and frames are designed for use in car parks, industrial or commercial areas carrying slow moving traffic. All C250 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Single seal frame BS EN124 Class C250 Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
CR
ICC
IETH
C
250 BS EN
124 KITEM
AR
KED
750 x 750 clear opening x 75 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1037D Criccieth 750 x 750 900 x 900 75 EN124 Access Covers and Frames: C250, Group 3 C250 access covers and frames are designed for use in car parks, industrial or commercial areas carrying slow moving traffic. All C250 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Single seal frame BS EN124 Class C250 Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
PENR
HYN
C250 B
S EN124 K
ITEMA
RK
ED
900 x 900 clear opening x 75 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1038D Penrhyn 900 x 900 1050 x 1050 75 EN124 Access Covers and Frames: C250, Group 3 C250 access covers and frames are designed for use in car parks, industrial or commercial areas carrying slow moving traffic. All C250 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Non-rocking 3-point suspension design BS EN124 Class D400 BS 7903 (1997) Compliant Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
WYK
E
D400 B
S EN124 K
ITEMA
RK
ED
450 x 450 clear opening x 100
C
LASSIC
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1053D Wyke 450 x 450 610 x 610 100 BS EN124 Access Covers and Frames: D400 Group 4 D400 access covers and frames are designed for use in areas, which are subject to fast moving traffic such as major roads. All D400 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Non-rocking 3-point suspension design BS EN124 Class D400 BS 7903 (1997) Compliant Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
CLU
N
D
400 BS EN
124 KITEM
AR
KED
600 x 450 clear opening x 100 or 150 deep
C
LASSIC
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1026 Clun 600 x 450 750 x 600 100 1026-150 Clun 600 x 450 750 x 600 150 BS EN124 Access Covers and Frames: D400 Group 4 D400 access covers and frames are designed for use in areas, which are subject to fast moving traffic such as major roads. It is recommended that a 150mm frame be specified for motorway applications. All D400 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Non-rocking 3-point suspension design BS EN124 Class D400 BS 7903 (1997) Compliant Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
MO
NM
OU
TH
D400 B
S EN124 K
ITEMA
RK
ED
750 x 600 clear opening x 100 or 150 deep
C
LASSIC
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1019 Monmouth 750 x 600 910 x 750 100 1019-150 Monmouth 750 x 600 910 x 750 150 BS EN124 Access Covers and Frames: D400 Group 4 D400 access covers and frames are designed for use in areas, which are subject to fast moving traffic such as major roads. It is recommended that a 150mm frame be specified for motorway applications. All D400 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Non-rocking 3-point suspension design BS EN124 Class D400 BS 7903 (1997) Compliant Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
HA
RLEC
H
D400 B
S EN124 K
ITEMA
RK
ED
675 x 675 clear opening x 100 or 150 deep
C
LASSIC
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1017D Harlech 675 x 675 835 x 835 100 1017D-150 Harlech 675 x 675 835 x 835 150 BS EN124 Access Covers and Frames: D400 Group 4 D400 access covers and frames are designed for use in areas, which are subject to fast moving traffic such as major roads. It is recommended that a 150mm frame be specified for motorway applications. All D400 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Non-rocking 3-point suspension design BS EN124 Class D400 BS 7903 (1997) Compliant Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
MO
NM
OU
TH
D400 B
S EN124 K
ITEMA
RK
ED
750 x 600 clear opening x 100 or 150 deep
C
LASSIC
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1019 Monmouth 750 x 600 910 x 750 100 1019-150 Monmouth 750 x 600 910 x 750 150 BS EN124 Access Covers and Frames: D400 Group 4 D400 access covers and frames are designed for use in areas, which are subject to fast moving traffic such as major roads. It is recommended that a 150mm frame be specified for motorway applications. All D400 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Non-rocking 3-point suspension design BS EN124 Class D400 BS 7903 (1997) Compliant Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
HO
PTON
D400 B
S EN124 K
ITEMA
RK
ED
750 x 750 clear opening x 100 or 150 deep
C
LASSIC
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1036 Hopton 750 x 750 910 x 910 100 1036-150 Hopton 750 x 750 910 x 910 150 BS EN124 Access Covers and Frames: D400 Group 4 D400 access covers and frames are designed for use in areas, which are subject to fast moving traffic such as major roads. It is recommended that a 150mm frame be specified for motorway applications. All D400 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Non-rocking 3-point suspension design BS EN124 Class D400 BS 7903 (1997) Compliant Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
WH
ITTING
TON
D
400 BS EN
124 KITEM
AR
KED
900 x 600 clear opening x 100 or 150 deep
C
LASSIC
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1018 Whittington 900 x 600 1060 x 750 100 1018-150 Whittington 900 x 600 1060 x 750 150 BS EN124 Access Covers and Frames: D400 Group 4 D400 access covers and frames are designed for use in areas, which are subject to fast moving traffic such as major roads. It is recommended that a 150mm frame be specified for motorway applications. All D400 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Non-rocking 3-point suspension design BS EN124 Class D400 BS 7903 (1997) Compliant Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
HA
RTLEB
UR
Y
D
400 BS EN
124 KITEM
AR
KED
900 x 900 clear opening x 100 deep
C
LASSIC
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1035 Hartlebury 900 x 900 1065 x 1065 100 1002 Hartlebury 900 x 900 1065 x 1065 150 BS EN124 Access Covers and Frames: D400 Group 4 D400 access covers and frames are designed for use in areas, which are subject to fast moving traffic such as major roads. It is recommended that a 150mm frame be specified for motorway applications. All D400 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
GROUP 3
For use in car parks, industrial or commercial areas carrying slow moving traffic.C250
FEATURES: Non-rocking 3-point suspension design BS EN124 Class D400 BS 7903 (1997) Compliant Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing plate
PEMB
RO
KE
D
400 BS EN
124 KITEM
AR
KED
1220 x 675 clear opening x 100 or 150 deep
CLA
SSIC
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1022 Pembroke 1220 x 675 1378 x 835 100 1022-150 Pembroke 1220 x 675 1378 x 835 150 BS EN124 Access Covers and Frames: D400 Group 4 D400 access covers and frames are designed for use in areas, which are subject to fast moving traffic such as major roads. It is recommended that a 150mm frame be specified for motorway applications. All D400 manhole covers and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Non-rocking 3-point suspension design ITS, Impact Transfer System BS EN124 Class D400 BS 7903 (1997) Compliant Ductile Iron for lightweight and high strength Black coated finish OPTIONS: Badged SW or FW Locking Ventilated Safety Grid Sealing Plate
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1039 Kington 1800 x 675 1965 x 850 150 BS EN124 Access Covers and Frames: D400 Group 4 D400 access covers and frames are designed for use in areas, which are subject to fast moving traffic such as major roads. It is recommended that a 150mm frame be specified for motorway applications. All D400 manhole covers and frames are certified to the requirements of BS EN124.
KIN
GTO
N
D400 B
S EN124 K
ITEMA
RK
ED
1800 x 675 clear opening x 150 deep
C
LASSIC
© 2005, R&B UK JT Limited.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
optional optionaloptional optionaloptional optionaloptional optionaloptional optionaloptional optional
98
PRODUCT CODE PRODUCT NAME CLEAR OPENING (MM) OVER BASE (MM) COVER DEPTH (MM)
CDG18TF RUTHIN 365 x 310 515 x 40 Traffic Flow GG+F 75
1013D BRECON 450 x 450 600 x 600 Single Seal, Solid Top 45
1012D ACTON 600 x 450 750 x 600 Single Seal, Solid Top 45
1012D/TS ACTON(TRAFFIC SIGNAL) 600 x 450 750 x 600 Single Seal, Solid Top 45
1011D FLINT 600 x 600 650 x 650 Single Seal, Solid Top 45
1009D MORETON 750 x 600 900 x 750 Single Seal, Solid Top 50
1037D CRICCIETH 750 x 750 900 x 900 Single Seal, Solid Top 75
1007D CROFT 900 x 600 1050 x 760 Single Seal, Solid Top 45
1038D PENRHYN 900 x 900 1050 x 1050 Single Seal, Solid Top 75
BESPOKE OPTIONS
• Locking (security or standard screws)• Double seal (neoprene rubber seal)• Badging • Venting
BESPOKE OPTIONS
• Sealing plates (pressure tight 1 BAR available)• Locking (security or standard screws)• Badging • Venting• Safety grids
PRODUCT CODE PRODUCT NAME CLEAR OPENING (MM) OVER BASE (MM) COVER DEPTH (MM)
1053D WYKE 450 x 450 605 x 605 Double Tri 100
1026D CLUN 600 x 450 760 x 620 Double Tri 100
1001D MONTGOMERY 600 x 600 690 x 690 Double Tri 100/150
1017D HARLECH 675 x 675 780 x 780 Double Tri 100/150
1019D MONMOUTH 750 x 600 900 x 780 Double Tri 100/150
1036D HOPTON 750 x 750 920 x 920 Double Tri 100/150
1018D WHITTINGTON 900 x 600 1060 x 770 Double Tri 100/150
1035D HARTLEBURY 900 x 900 1070 x 1070 Double Tri 100/150
1022D PEMBROKE 1220 x 675 1378 x 820 Double Tri 100/150
1039D KINGTON 1800 x 675 1965 x 850 Double Tri 150
1027D LINCOLN 1000 x 1000 1150 x 1150 Double Tri 100
1063D WINDSOR 1200 x 900 1300 x 1000 Double Tri 100
1025D BRIDGNORTH 1200 x 1200 1350 x 1350 Double Tri 100
GROUP 5
E600
FEATURES: Non-rocking wedge and hinge suspension design BS EN124 Class D400 BS 7903 (1997) Compliant Ductile Iron for lightweight and high strength Black coated finish
Traffic Flow Hinged D400 Gully Grating and Frame
Code Name Clear Opening (mm) Over Base (mm) Depth (mm) Waterway CGD22K Dover 430 x 370 580 x 450 100 924 cm sq EN124 Gully Gratings and Frames: D400, Group 4 D400 gully gratings and frames are designed for use in the kerbside of carriageways and estate roads including pedestrian streets. All D400 gully gratings and frames are certified to the requirements of BS EN124.
DO
VER
D
400 BS EN
124 KITEM
AR
KED
430 x 370 clear opening x 100 deep
CLA
SSIC
© 2005, R&B UK JT Limited.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
FEATURES: Non-rocking 3-point suspension design Classic frame design BS EN124 Class D400 BS 7903 (1997) Compliant Ductile Iron for lightweight and high strength Black coated finish
STOK
ESAY
D
400 BS EN
124 KITEM
AR
KED
600 x 600 clear opening x 100 or 150 deep
C
LASSIC
© 2005, R&B UK JT Limited.
Code Product Name Clear Over Base (mm) Depth (mm) Waterway Opening (mm) 1023 Stokesay 600 x 600 755 x 755 100 2000cm sq 1023 150 Stokesay 600 x 600 755 x 755 150 2000cm sq EN124 Gully Gratings and Frames: D400, Group 4 D400 gully gratings and frames are designed for use in the kerbside of carriageways and estate roads including pedestrian streets. It is recommended that a 150mm frame be specified for motorway applications. All D400 gully gratings and frames are certified to the requirements of BS EN124.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
GROUP 4
Areas subject to fast moving traffic, so it is recommended in motorway application 150mm frame
is specified. D400
Areas subject to exceptionally high wheel loads Eg: dock yards and air craft pavements.
PRODUCT CODE PRODUCT NAME CLEAR OPENING (MM) OVER BASE (MM) COVER DEPTH (MM)
1060D MONTGOMERY 600 x 600 800 x 800 Double Tri 150
1061D PEMBROKE 1220 x 675 1385 x 885 Double Tri 150
1062D KINGTON 1800 x 675 2070 x 955 Double Tri 150
1062E HARLECH 675 x 675 825 x 825 Double Tri 150
CGE23TF150 DOVER 420 x 420 540 x 540 Traffic Flow 150
optional optionaloptional optional
optional optionaloptional optionaloptional optional
1110
GRATING FOR PEDESTRIAN AREAS
FEATURES: Non-rocking wedge and hinge suspension design ITS, Impact Transfer System BS EN124 Class D400 BS 7903 (1997) Compliant Ductile Iron for lightweight and high strength Black coated finish Kerb hinged
GLA
MIS
D
400 BS EN
124 KITEM
AR
KED
430 x 430 clear opening x 100 deep
IMPA
CT
© 2005, R&B UK JT Limited.
Code Name Clear Over Depth Opening (mm) Base (mm) (mm) IMPCGD1027 Glamis 430 x 430 580 x 515 100 EN124 Gully Gratings and Frames: D400 D400 gully gratings and frames are designed for use in the kerbside of carriageways and estate roads including pedestrian streets. All D400 gully gratings and frames are certified to the requirements of BS EN124. This pedestrian pattern grating has been designed with uni-directional openings for pedestrian traffic while still delivering good water flow characteristics.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
PRODUCT CODE CLEAR OPENING (MM) OVER BASE (MM) COVER DEPTH (MM)
1055D 150 x 150 260 x 260 Solid Top 100
1056D 225 x 225 335 x 335 Solid Top 100
1057D 300 x 300 410 x 410 Solid Top 100
1058D 380 x 230 530 x 530 Solid Top 100
1065D 430 x 280 550 x 400 Solid Top 100
1054D 150 x 150 230 x 230 Loop Box 150
optional optional optional optionaloptional optional
D400
PRODUCT CODE PRODUCT NAME CLEAR OPENING (MM) OVER BASE (MM) GRATING DEPTH (MM)
CGD25TF DOVER 365 x 310 450 x 384 Traffic Flow 100
CGD22TF DOVER 430 x 370 580 x 460 Traffic Flow 100
CGD24TF/1W DOVER 420 x 420 570 x 500 Traffic Flow 100/150
CGD24TF DOVER 420 x 420 570 x 500 Reversible 100
CGD24KB DOVER 420 x 420 570 x 500 Kerb Hinged 100
CGD26KB/PED GLAMIS 420 x 420 570 x 500 Pedestrian 100
CGD19D RIPLEY 420 x 420 575 x 510 Double Triangular 100/150
1024D BERKELEY 500 x 350 652 x 435 Traffic Flow 100
CDG28KB DUDLEY 600 x 450 760 x 540 Reversible 100/150
1023D STOKESAY 600 x 600 755 x 755 Double Triangular 100/150
CGD29HDT RIPLEY H 430 x 370 520 x 524 Hinged + Double Triangular 100
CGD40 DOVER 430x 370 580 x 460 Hinged 150
CGD31V YORK 650 x 650 790 x 810 V Profile 150
1045D HALKYN 480 x 370 560 x 410 Half Batter 150 / 200
1052D GLIN 480 x 370 560 x 410 45° Splay 150 / 200
BESPOKE OPTIONS
• Sealing plates (pressure tight 1 BAR available)• Locking (security or standard screws)• Badging • Venting• Safety grids
GROUP 4
D400 Surface BoxesOptions Badged SV, AV, WATER, FH, WO, METER, GAS, other badging available on request
Black coating Chained lids.
R&B’s unique spring lock design available on 420 x 420 and 430 x 370 Traffic flow hinged Gully Gratings
and Frames
optional optionaloptional optional
TUFTAC FEATURES
• The ironwork has passed independently conducted D400 load testing both filled and unfilled• It is BS EN124 D400 accredited.• The cover can be supplied filled or can be filled on site, the surface can be finished to compliment the surrounding surface characteristics, no more grip, no less!• The MA infill can be supplied in many colours to match adjacent road colours.• The MA infill is Carbon Neutral and can be fully recycled.• The MA infill can be resurfaced when worn, however MA is famous for its good wear characteristics.• The cover features a non-rocking three point suspension design.• Patented design.
The ductile iron covers and frames are designed to pass the statutory
highway loading requirements but unlike conventional ductile iron
covers that have a dangerously low skid resistance, the MA surface has
a high skid resistance at least equal to the surrounding road surface.
“Devon County Council has tested the MA infill for skid resistance, with various surface dressings giving great results equal to road surface values.”
Floating frame allows easy height adjustment of frame
bedding to suit the profile of the highway.
Open ended keyways drain water, but prevent objects being
dropped into the chamber.
TELECOMMUNICATIONS COVERS
optional optionaloptional optionaloptional optional
1312
PRODUCT NAME CLEAR OPENING (MM) OVER BASE (MM) COVER DEPTH (MM)
WHITTINGTON TELECOMS 896 x 696 1135 x 840 Double Triangular 150
PEMBROKE TELECOMS 1220 x 665 1460 x 915 Double Triangular 150
CONWAY TELECOMS 896 x 696 1135 x 840 Solid Top 150
LUDLOW TELECOMS 1220 x 665 1460 x 915 Solid Top 150
WHITTINGTON HINGED 896 x 696 1135 x 840 Hinged 150
PEMBROKE HINGED 1220 x 665 1460 x 915 Hinged 150
TUFTAC is a ductile iron manhole cover and frame, which is inset with an industry unique, special mastic asphalt (MA) formulation.TUFTAC
PRODUCT CODE PRODUCT NAME CLEAR OPENING (MM) OVER BASE (MM) COVER DEPTH (MM)
1001D/TUF/MONTGOMERY
TUFTAC 600 x 600 770 x 770 Recessed + Double Tri 100/150
1017D/TUF/ HARLECH TUFTAC 675 x 675 880 x 880 Recessed + Double Tri 100/150
1022D/TUF/PEMBROKE
TUFTAC 1220 x 675 1420 x 860 Recessed + Double Tri 100/150
1039D/TUF/ KINGTON TUFTAC 1800 x 675 2070 x 955 Recessed + Double Tri 100/150
PRODUCT NAME CLEAR OPENING (MM) OVER BASE (MM) COVER DEPTH (MM)
INTEGRA PEMBROKE 1220 x 675 1380 x 835 Double Tri Hinged 100
INTEGRA LINCOLN 1310 x 850 1470 x 1070 Double Tri Hinged 100
HINGED AND LOCKING D400
A comprehensive range of product accessories is available to enhance, protect and increase
safety of our products. The accessories include:
• Sealing plates and Safety Grids
• Personalised Badging
SEALING PLATES AND SAFETY GRIDS
Under surge conditions, pressure concentration in access shafts can lead to covers being forced out of access covers. In situation where this may
occur R&B offers a bolt-down mild steel sealing plate for added security. Mild Steel sealing plates also prevent the egress of odours and gases. Mild
steel sealing plates are secured to the access covers frame using a total of 12 bolts. The inner plate which is seated on a high strength neoprene
rubber seal is then locked to the sub frame with 16 Stainless steel bolts. Our standard sealing plate is produces using 3mm mild steel and can
take pressures of up to 0.5 BAR. Special sealing plates can be produced to take much higher water pressures and also can be coated in chemical
resistant materials for special applications.
SAFETY GRIDS
Specially designed mild steel safety grids depending on the design of the cover rest on the covers internal lip or pockets that are retrofitted to
enable to installation. They prevent the entry of any unwanted objects into the sewer shaft when work is being carried out.
BESPOKE OPTIONS
• Multiple leaf covers & duct runs• Can incorporate peep holes• Plain, grease or neoprene seals• Locking bolts (including home office approved security bolts)• Turnbuckle locking devices c/w security lifting keys• Water and pressure type units available• Badging & logo’s can be applied
PRODUCT CODE CLEAR OPENING (MM) DEPTH COVER TYPE LOADING
BP 30/30/80/10 300 x 300 80 Block Pavior 10T GLVW
BP 30/30/80/10RS 300 x 300 80 Block Pavior Square to Round 10T GLVW
BP 45/45/80/10 450 x 450 80 Block Pavior 10T GLVW
BP 45/45/80/10RS 450 x 450 80 Block Pavior Square to Round 10T GLVW
BP 60/45/80/10 600 x 450 80 Block Pavior 10T GLVW
BP 60/60/80/10 600 x 600 80 Block Pavior 10T GLVW
BP 60/60/100/10 600 x 600 100 Block Pavior 10T GLVW
BP 60/60/100/38 600 x 600 100 Block Pavior 38T GLVW
BP 675/675/100/10 675 x 675 100 Block Pavior 10T GLVW
BP 675/675/100/38 675 x 675 100 Block Pavior 38T GLVW
BP 75/60/80/10 750 x 600 80 Block Pavior 10T GLVW
BP 75/75/100/10 750 x 750 80 Block Pavior 10T GLVW
R&B can also offer a wide range of bespoke options on the above covers including locking and double sealed items.
RECESSED TRAYS
1514
SOLID TOP FABRICATED STEEL ACCESS COVERS RECESSED COVERS & FRAMES
PRODUCT CODE CLEAR OPENING (MM) DEPTH COVER TYPE LOADING
SBR 60/60 600 x 600 40 Recessed for Screed 10T GLVW
SBR 60/45 600 x 450 40 Recessed for Screed 10T GLVW
BLOCK PAVIORS
• Stainless steel edged trays are manufactured to take any internal flooring surface.
• Unique locking system
• Actually locks the cover through the edging, so that there are no unsightly bosses
protruding, which makes installation much easier than on similar covers especially
when tiled.
• Can be manufactured to take flexible floor finishes.
• Covers come locked as standard.
• Available in either mirror or satin finish.
• Can be stainless steel edged with galvanised frame or stainless steel edged with
stainless steel frame.
• Manufacture up to fork lift loading.
• Bosses made to suit M12 threaded lifting keys.
• Comes with Neoprene seal as standard.
• Made to any size including continuous duct runs.
• Manufactured from mild steel galvanised to ISO 1461.
• Can be fitted with either brass or aluminium trim.
• To take any internal flooring system.
• Can be made up to fork lift loading.
• Locked.
• Sealed.
• M12 threaded lifting bosses come as standard.
• Can be manufactured to suit any clear opening.
• Can be made as continuous duct run.
STAINLESS STEEL EDGE TRAYS
- Manufactured from mild steel galvanised to ISO 1461.
- Can be fitted with either brass or aluminium trim.
- To take any internal flooring system.
- Can be made up to fork lift loading.
- Locked.
- Sealed.
- M12 threaded lifting bosses come asstandard.
- Can be manufactured to suit any clear opening.
- Can be made as continuous duct run.
BRASS EDGE TRAYS
Section of Stainless Steel Edge Tray
Section of Brass/Aluminium Edge
Techn i ca l In fo rmat ion
f s p
Fabweld Steel Products Ltd Units D11-D13 Court 2000
Bridgnorth Road Madeley Telford Shropshire TF7 4JB
Tel: 01952 581430 Fax: 01952 586141
Email: [email protected] Web: www.manholes.co.uk
- Stainless steel edged trays are manufactured to take any internal flooring surface.
- Fabweld’s unique locking system actually locks the cover through the edging, so that there are no unsightly bosses protruding, which makes installation much easier than on similar covers especially when tiled.
- Can be manufactured to take flexiblefloor finishes.
- Covers come locked as standard.
- Available in either mirror or satin finish.
- Can be stainless steel edged with galvanised frame or stainless steeledged with stainless steel frame.
- Manufacture up to fork lift loading.
- Bosses made to suit M12 threaded lifting keys.
- Comes with Neoprene seal as standard.
- Made to any size including continuousduct runs.
Front cover picture:Stainless Edged at entrance to Linda McCartney Centre,Royal Liverpool Hospital
2pp ‘Show’ Edge (Linda McCartn) 4/7/07 1:48 PM Page 2
STAINLESS STEEL EDGE TRAYS
- Manufactured from mild steel galvanised to ISO 1461.
- Can be fitted with either brass or aluminium trim.
- To take any internal flooring system.
- Can be made up to fork lift loading.
- Locked.
- Sealed.
- M12 threaded lifting bosses come asstandard.
- Can be manufactured to suit any clear opening.
- Can be made as continuous duct run.
BRASS EDGE TRAYS
Section of Stainless Steel Edge Tray
Section of Brass/Aluminium Edge
Techn i ca l In fo rmat ion
f s p
Fabweld Steel Products Ltd Units D11-D13 Court 2000
Bridgnorth Road Madeley Telford Shropshire TF7 4JB
Tel: 01952 581430 Fax: 01952 586141
Email: [email protected] Web: www.manholes.co.uk
- Stainless steel edged trays are manufactured to take any internal flooring surface.
- Fabweld’s unique locking system actually locks the cover through the edging, so that there are no unsightly bosses protruding, which makes installation much easier than on similar covers especially when tiled.
- Can be manufactured to take flexiblefloor finishes.
- Covers come locked as standard.
- Available in either mirror or satin finish.
- Can be stainless steel edged with galvanised frame or stainless steeledged with stainless steel frame.
- Manufacture up to fork lift loading.
- Bosses made to suit M12 threaded lifting keys.
- Comes with Neoprene seal as standard.
- Made to any size including continuousduct runs.
Front cover picture:Stainless Edged at entrance to Linda McCartney Centre,Royal Liverpool Hospital
2pp ‘Show’ Edge (Linda McCartn) 4/7/07 1:48 PM Page 2
FEATURES: Single seal plastic frame 35 Kn loading Frame to chamber fixing as standard Durable finish Non slip definition Unique self captive locking system Badging facility available Slim line design stacks safely and tidily Economical in haulage and storage space
Poliglas 35 K
n loading
450 diameter clear opening x 44 deep
© 2005, R&B UK JT Limited.
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 3002-PPIC Poliglas 450 diameter 550 diameter 44 Poliglas Access Covers and Frames are designed for domestic driveway use, pedestrian and pedal cycle areas only.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
PRODUCT CODE PRODUCT NAME CLEAR OPENING (MM) OVER BASE (MM) DEPTH (MM)
3002-PPIC Poliglas 450 Dia 550 Dia 44
Code Name Over Base (mm) Depth (mm) 2004 Gully Chute 600 x 450 185 FEATURES: Cast Iron for high strength and durability. Designed to compliment standard gully products. 150mm inside diameter outlet. Wide flange for brickwork and mortar,
GU
LLY CH
UTE
600 x 450 over base 150 diameter outlet
© 2005, R&B UK JT Limited.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554 Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.com Email: [email protected]
PRODUCT CODE PRODUCT NAME OVER BASE (MM) DEPTH (MM)
2004 Gully Chute 600 x 450 185
FEATURES
• Ductile Iron of high strength and durability• 150mm inside diameter outlet • Designed to compliment standard gully products • Wide flange for brickwork and mortar
C250 access covers and frames are designed for use in car parks, industrial or commercial areas carrying slow moving traffic.
FEATURES: Hinged and locked BS EN124 Class C250 Ductile Iron for lightweight and high strength Black coated finish
Code Product Name Clear Opening (mm) Over Base (mm) Depth (mm) 1048D Chester 330x330 390x368 80 EN124 Gully Gratings and Frames: C250, Group 3 C250 access covers and frames are designed for use in car parks, industrial or commercial areas carrying slow moving traffic. All C250 manhole covers and frames are certified to the requirements of BS EN124.
EN124 C250 R+B UK JT
R+B UK JTEN124 C250
CH
ESTER – D
ISHED
GU
LLY GR
ATIN
G C
250 BS EN
124
330X330 clear opening x 80 deep
© 2005, R&B UK JT Limited.
R&B UK JT Limited Court 2000, Bridgnorth Road, Madeley, Telford Shropshire, TF7 4JB
Switchboard: +44 (0) 1952 580554Facsimile: +44 (0) 1952 580527
Website: www.randb-uk.comEmail: [email protected]
1716
DECORATIVE EDGE PRODUCTS
STAINLESS STEEL EDGE TRAYS
BRASS EDGE STEEL TRAYS
MISCELLANEOUS
FEATURES
• Hinged and locked• BS EN124 Class C250• Ductile Iron for lightweight and high strength • Black Coated finish
CHESTER
PRODUCT CODE PRODUCT NAME CLEAR OPENING (MM) OVER BASE (MM) DEPTH (MM)
3002-PPIC Poliglas 450 Dia 550 Dia 44
GULLY CHUTE CONNECTOR
Suitable for use in domestic areas with occasional light vehicular access.POLIGLAS
FEATURES
• Single seal plastic frame • 35 kn loading• Patented locking system• Durable Finish • Non Slip Definition • Slim line design stacks safely and tidily
R&B compass range of composite access covers achieved a market leading Skid Resistance Value of 90, when tested by the Materials Laboratory of
Devon County Council. All Access Covers are manufactured in SMC [Sheet Moulding Compound] a fibre-reinforced atenial, which consists primarily of
thermoset resin, glass fibres and fillers.
• Complies with requirements of EN124
• Impact and weather resistant
• No inherent scrap value
• Locking option
• Corrosion resistant
• Unique multi - direction slip resistant
tread pattern
• Lightweight meeting Manual Handling
Regulations
PRODUCT CODE LOADING ‘X’ ‘Y’ DEPTH
CMC30/30 B125 310 295 26
CMC30/45 B125 467 317 26
CMC45/45 B125 469 469 26
CMC60/45 B125 617 468 26
CMC60/60 B125 617 617 26
COMPOSITE COVERS
PRODUCT CODE MATERIAL ‘X’ ‘Y’ DEPTH
CFS30/30 Steel 313 298 75
CFS30/45 Steel 469 318 75
CFS45/45 Steel 469 469 75
CFS60/45 Steel 618 469 75
CFS60/60 Steel 618 618 75
FRAMES
The table below has been developed from data
collected by County Surveyors Society and illustrates
the acceptable parameter when tested using the TRRL
Pendulum Test in general accordance with
BS 6677 part 1:1986
This test provides a slip resistance value (PSRV) for
each surface tested. The higher value the greater slip
resistance.
TRRL PENDULUM VALUE
CONDITION OF SURFACE
19 and below Dangerous
20 - 39 Marginal
40 - 74 Satisfactory
above 75 Excellent
18 19
COMPASS COMPOSITE COVERS FIRMGROUND POROUS PAVING
FirmGround is a UK manufactured strong, versatile and interlocking porous paving system with products available for a wide
range of applications.
FirmGround has been specially designed in the UK to allow rain water to drain away whilst still retaining a small amount, this prevents the
grass from getting waterlogged and also ensures that it doesn’t dry out through lack of water. FirmGround can also be filled with your desired
type of gravel reinforcing areas whilst still keeping them naturally attractive.
from recycledhigh density polyethylene
SUITABLE FOR
• carparks & hardstandings
• footpaths & verges
• pedestrian areas
• bridge abutments
• access roads HGV service access and
overflow grass car parking
PRODUCT CODE PRODUCT NAME NOMINAL SIZE COVERAGE RATE FILTRATION RATE INFILL SURFACE AREACOMPRESSIVE
STRENGTH
FIRMG48 FirmGround 48 500 x 500 x 48mm 4 blocks/m2 >500cm/hour >90% >2000KN/m2
FIRMG70 FirmGround 70 500 x 500 x 68mm 4 blocks/m2 >500cm/hour >90% >2400KN/m2
FIRMGH FirmGround Heavy 500 x 500 x 80mm 4 blocks/m2 >250cm/hour >55% >2500KN/m2
���������������The is a quick and easy method of road installation for car parks, footpaths, pedestrian areas, bridge abutments, shed bases and access roads. As the weight applied to the road can vary, we have designed the to withstand compressive strengths of up to
����������
����������
�����
������2500 KN / m2 (EMPTY).
This can withstand fully loaded waggon loads
����� ����������� ������
Any material can be placed inside the compartments, from gravel to grass, as it is essential that water can drain
away to prevent foundations from damp and grass from getting water
logged.
������������ ������ �
Built in water reservoir for optimised grass growth, which doubles up as a grounding
base for ����������
The optimized notch construction of the ����������allows pedestrians
and vehicles to travel with improved traction on the road.
�����
������
�
��� ��������������������������
��������������� ������ �� �
With this fantastic feature the ����������
instantly and accurately.������
�
can be installed Made in UK from recycled polyethylene
The design of the can be stacked easily and efficiently saving
you money on storage and transport.
���������������
FirmGround has three products in its range meaning there
is a product available for almost every application please
call or email our sales team for further information and a
speedy competitive quote.
BENEFITS OF THE F IRMGROUND SYSTEM
• Made from recycled material & 100% recyclable
• Rapid installation with our unique interlocking system
• UV resistant
• SUDS source control compliant
• Durable and Maintenance free
20 21
Compass is a range of innovative structural access chambers for underground
installations. Ideal for all ducted network applications where access chambers
are required for inspection and maintenance, Compass is suitable for all
footway and highway projects.
Compass chambers are formed by an interlocking rectangular ring. Available in
sizes ranging from 300 x 300 to 1200 x 1200mm
Compass sections are a 150mm deep, with a single reinforced wall design. This
makes them lightweight and easy to install. Compass is able to support both
BSEN124 B125 and D400 loadings with added reinforcement and concrete
surround.
Compass parts are manufactured from 100% recycled polypropylene. All
Compass parts are highly resistant to attack from acids and alkalis and other
forms of chemical erosion. They are able to withstand high loading forces
which means that a concrete backfill is not required in many applications.
COMPASS ESTATE
APPLICATIONS
Compass can be used to create Duct Access Chambers,
Drawpits, Catchpits, Valve & Meter Chambers, Highway MCX
chambers and Rail Chambers. Thanks to their B125 and D400
loading capability. Atlas chambers are suitable for a wide rage of
applications.
Duct entry options are available with 110mm entries pre-
moulded into the wall blocks. Additional larger pre-drilled duct
entries can be supplied prior to despatch and meet specific site
requirements.
Applications And Features
Applications
Compass can be used to create Duct Access Chambers,Drawpits, Catchpits, Valve & Meter Chambers, Highway MCXchambers and Rail Chambers. Thanks to their B125 and
D400 loading capability. Atlas chambers are suitable for awide rage of applications.
4
Duct entry options are available with 110mm entries pre-moulded into the wall blocks.Additional larger pre-drilled duct entries can be supplied prior to despatch and meetspecific site requirements.
Lightweight chamber construction allows manualhandling for rapid on-site installation and eliminate themachine costs associated with traditional concretechamber construction.
from recycledhigh density polyethylene
5
900
150
750
1200
1050
600
Example
5
900
150
750
1200
1050
600
Example
Modular duct access system
Available in sizes ranging from 300 x 300 up to
1200 x 1200
Easily reinforced to meet D400 requirements.
22 23
Compass Highway Composite Access Chambers system is a modular twinwall
access chamber system which has been designed as a fast-buildhigh
strength stress free solution to traditional concrete and brick built chambers.
Manufactured from high quality recyclable polypropylene giving ultimate
strength whilst keeping transport and handling costs to a minimum. Compass
Highway consists of 150mm deep sections which are then stacked to create
the required depth.
COMPASS HIGHWAY
from recycledhigh density polyethylene
A cost effective, simple alternative to concrete and brick chambers.
FEATURES
• Huge Range of sizes available
• Quick and Easy installation
• Manufactured from recycled and fully recyclable materials
• 100 mm Twin-wall design providing excellent strength
BENEFITS OF THE HIGHWAYS SYSTEM
• Available in B125, D400 & F900 loadings
• Durable and lightweight
• No need for concrete surround
• Reduced handling & Health and safety risk
• Pre-drilled duct entries available
• Reinforced Twin-wall Design
●Available in B125, D400 &F900 loadings
●Durable and lightweight
●No need for concrete sur-round
●Reduced handling & Healthand safety risk
●Pre-drilled duct entriesavailable
●Reinforced Twin-wall Design
Benefits of the EasyStack System
●Huge Range of sizes available●Quick and Easy installation●Manufactured in the UK●Manufactured from recycled and
fully recyclable materials●100 mm Twin-wall design
providing excellent strength
Compass EasyStack - Features
APPLICATIONS
• Street lighting & Traffic signals Chambers
• Jointing/Splicing Chambers
• UTX Chambers
• Cable Drawpits
• Duct Access Chambers
• PRV/MPV Chambers
• Highway MCX Chambers
Light weight chamber construction allows manual handling for rapid
on-site installation and removing the machinery costs associated with
traditional concrete chamber construction.
Available in a huge range of sizes please call our sales team for
further details.
BESPOKE OPTIONS
• Duct entry Bellmouths
• Plastic Step Irons
• Plastic cable bearers and brackets
• 150 mm Duct Entry Reducers
Specifically designed to work with Compass Composite Covers
24 25
ADD-A-STEP modular ladders are designed to allow easy access to chambers
and are approved for use in potable water, waste water, highly corrosive and
general construction applications and are a cheaper, safer more user friendly
alternative to traditional stainless steel ladders.
The ADD-A-STEP™ modular ladder system is designed to provide a product
that can be supplied off the shelf for next day delivery. Each module of the
ADD-A-STEP™ ladder consists of two stiles, one rung and two retaining clips.
Each stile measures 360mm long, 80mm wide and 32mm thick maximum
dimension. The ladder width outside the stiles (uprights) is 435mm.
The ADD-A-STEP™ ladder has 30mm diameter rungs at 300mm centre
spacing and the width or foot space inside the stiles is 375mm. Two types
of wall brackets are supplied as standard, one for circular and one for square
chambers. The ladder can be assembled on site using the number of modules
to achieve any length and can be trimmed to length without the need for
expensive cutting equipment. The only piece of equipment required is a
standard hand saw of any description.
COMPASS ADD-A-STEP™
BENEFITS
The Modular design allows for more economical transportation than fully
assembled ladders. The ADD-A-STEP™ ladder requires no maintenance
other than occasional cleaning with a pressure hose if desired. The ladder
has excellent insulation properties so it can be used in applications where
electrical cables are present. The materials used, polybutelene (PBT) are
UV tolerant, non-corrosive and ultimately fully recyclable. Being injection
moulded ladders can easily be cut on site with no harmful shards or dust
given off.
Contractors and Water Utilities will have major benefits regarding Health &
Safety issues particularly weight. At approx. 5Kg per linear metre the ladder
is significantly lighter than galvanized or stainless steel alternatives.
The yellow colour of the ADD-A-STEP™ system has High Visibility properties
making it clearly visible when the manhole cover is raised. There is also a
proven reduced CAPEX versus stainless steel. The ADD-A-STEP™ system is
fully compliant and tested to - BSEN14396.
Assembled in minutes
Stainless Steel Pull-ups available to suit ex stock
Modular Manhole Ladder
26 27
Comparison** Wheel Loads Load Test Data
FACTA Class
EN24 ClassWheel Loads* (slow moving)
Pneumatic
Wheel Loads* (slow
moving) Solic
Test 1 ( Service) (Static Wheel Load plus overload
& dynamic effects)
Test 2 (Ultimate)(Test 1 load plus ultimate safety
factor)
A
A15 0.6 tonne (5kN) n/a 5.0 x 1.0 x 1.0 = 5.0kN 5.0 x 1.6 = 8.0kN
AA
n/a1.5 tonne
(15kN)n/a 15.0 x 1.1 x 1.15 = 19.0kN 19.0 x 1.6 = 31.0kN
AAA
n/a2.5 tonne
(25kN)0.5 tonne 25.0 x 1.1 x 1.15 = 32.0kN 32.0 x 1.6 = 52.0kN
B
B1250.5 tonne
(50kN)0.75 tonne 50.0 x 1.1 x 1.15 = 63.25kN 63.25 x 1.6 = 101.0kN
C
C2506.5 tonne
(65kN)1.0 tonne 65.0 x 1.1 x 1.15 = 82.25kN 82.5 x 1.6 = 132.0kN
D
D40011.0 tonne
(108kN)3.0 tonne 106.0 x 1.1 x 1.15 = 137.5kN 137.5 x 1.6 = 222.0kN
E
E60016.0 tonne
(158kN)5.0 tonne 158.0 x 1.1 x 1.15 = 200.0kN 200.0 x 1.6 = 320.0kN
F
F90024.0 tonne
(237kN)n/a 237.0 x 1.1 x 1.15 = 300.0kN 300.0 x 1.6 = 482.0kN
Fabricated access covers complying with the requirement of this specification shall be graded as follows:
NOTE: Under the “Road Vehicles ( Authorised Weight) Regulations 1998”, axle weights for the UK are limited to 11.5 tonnes maximum. “Refer to ‘Acceptance Test
for maximum design load/load bearing capacity.
* Slow moving wheel loads are deemed to be speeds no greater than 20mh, in low intensity trafficked areas. Where higher intensity traffic is expected, a higher
load classification of cover is recommended.
** These comparisons are indicative of the typical suitable area of application of each product class and are not a like-for-like performance comparison.
Comparisons are for guidance only and not intended to be exact.
optional optional
optional optional
optional optional
optional optional
optional optional
FACTA CLASSIFICATION TABLE
THE ADVANTAGES OF AQUACRATE
• Assembled ready to install with up to 75M³ on a full load
• Available in different configurations to meet specific requirements
• High load bearing capability capable of withstanding HGV traffic
• Simple and fast to install with 3 units per M³
Modular size of 1m x 1m plan x 333mm height ensures great
• Versatility in both size and shape of storage
• Small modular height (333mm) allows use with high water tables
• Standard connectivity with both 110 or 160mm connections
• Lightweight units under 20kg removes need for mechanical handling
AQUACRATE Loadbearing underground water storage/attenuation system
from strong copolymer polypropylene
PRODUCT CODE PRODUCT NAME NOMINAL SIZE CAPACITY UNIT WEIGHT KGCOMPRESSIVE
STRENGTH
AQUA2 Aquacrate2 1000 x 1000 x 333mm 333 Litres 15 >200KN/m2
AQUA4 Aquacrate4 1000 x 1000 x 333mm 333 Litres 17 >400KN/m2
WHY USE AQUACRATE?
• Prevents extreme peak flows to main drainage and water purification systems
• Rainwater is “cleaned” by the geotextile surround
• Decreases inconvenience of flooding during heavy rain falls
• Allows development of difficult sites by use of attenuation storage
• Decreases environment problems caused by development
WHAT IS AQUACRATE?
Aquacrate is a UK manufactured load bearing underground water storage attenuation
system specifically designed to better manage storm water flow.
DESIGN
Following detailed assessment of the required storm water to be stored (see CIRIA C522, R156 & BRE 365) the total number of Aquacrate units can be
calculated using approx. 3/m3 (1000 litres). Decide on the best configuration for the characteristics of the site in question and create the “box” accordingly
using the length and width dimensions allowing for a 95% void ratio. Aquacrate is suitable for landscaped and car park areas as well as heavier duty use. As a
guide, units require