dynaflow - gre piping - march 26 2009
TRANSCRIPT
-
Dynaflow Lectures - March 26th 2009
Fiberglass Pipe Systems
-
Agenda
Standards, very different markets.
Why should we choose for Glassfibre Reinforced.
materials for piping systems.
Product Ranges and Methods of Construction.
Jointing Methods.
Prefabrication.
Design.
-
Examples of very different marketsIndustrial pipingDrainage / Sewerage systems
-
GRP used in very different marketsIndustrial pipingDrainage / Sewerage systems
-
GRP used in very different markets
Low pressure.
Main focus:
Need to withstand soil and traffic loads
Stability in hoop direction, pipe stiffness.
Medium High pressure.
Main focus:
Need to pump from A to B and want to know under what (safety) conditions
System integrity.
Industrial pipingDrainage / Sewerage systems
-
GRP used in very different marketsNeed to withstand soil and
traffic loadsNeed to pump from A to B
and want to know under what (safety) conditions
Example of standards:AWWA M45 / C950
EN 1796EN 14364
ISO TR 10465
Example of standards:ASME B31.3
UKOOAISO 14692
-
GRP used in very different marketsNeed to withstand soil and
traffic loadsNeed to pump from A to B
and want to know under what (safety) conditions
Example of standards:AWWA M45 / C950
EN 1796EN 14364
ISO TR 10465
Example of standards:ASME B31.3
UKOOAISO 14692
-
GRP EN 1796Need to withstand soil and
traffic loads
EN 1796
Title: Plastics piping systems for water supply with or without pressure Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin.
-
GRP EN 1796Need to withstand soil and
traffic loads
-
GRP EN 1796Need to withstand soil and traffic
loads
EN 1796, characteristics:
Pipe:Verification of long-term proper-ties (Stiffness, PN).
Joints:Verification of initial sealing.
Fittings:No verification on PN.
-
GRP EN ISO 14692Need to pump from A to B and
want to know under what (safety) conditions
ISO 14692.
Title:Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping.
-
GRP EN ISO 14692pump from A to B and know
under what (safety) conditions
-
GRP EN ISO 14692pump from A to B and know
under what (safety) conditions
ISO 14692, characteristics:
Pipe:Verification of long-term proper-ties (PN, hoop & axial strength).
Joints & Fittings:Verification of long-term properties (as strong as pipe).
Pipe system:Assessment of integrity of pipe system based on known hoop and axial strength.
-
pump from A to B and know under what (safety) conditions
=
Know the strength of installed pipeline
GRP EN ISO 14692
-
I. Strength of components :Qualification.
II. Strength of pipe system :System Design.
III. Installation of pipe system :Training & Qualification.
ISO 14692 - part 2
ISO 14692 - part 3
ISO 14692 - part 4
GRP EN ISO 14692
Site Quality PLan
Design Envelope
Know the strength of installed pipeline
-
2:1 load condition
ASTM D 2992-96FPI AD, Wavistrong serie EST, ID 150 mm pipe PL/PL, 65C, pressure, TUV
10,0
100,0
1000,0
1,00E+00 1,00E+01 1,00E+02 1,00E+03 1,00E+04 1,00E+05 1,00E+06
time (hrs)
p
r
e
s
s
u
r
e
(
b
a
r
g
)
Mean LCL LPL Data
GRP EN ISO 14692Design Envelope
2:1 loa
d cond
ition
Long-term envelope
Hoop stress
A
x
i
a
l
s
t
r
e
s
s
-
Long-term envelope
Hoop stress
A
x
i
a
l
s
t
r
e
s
s
f2
Design envelope
2:1 load condition
GRP EN ISO 14692Design Envelope
2:1 loa
d cond
ition
ASTM D 2992-96FPI AD, Wavistrong serie EST, ID 150 mm pipe PL/PL, 65C, pressure, TUV
10,0
100,0
1000,0
1,00E+00 1,00E+01 1,00E+02 1,00E+03 1,00E+04 1,00E+05 1,00E+06
time (hrs)
p
r
e
s
s
u
r
e
(
b
a
r
g
)
Mean LCL LPL Data
-
Design envelope
Long-term envelope
f2
A
x
i
a
l
s
t
r
e
s
s
A
x
i
a
l
s
t
r
e
s
s
GRP EN ISO 14692Design Envelope
Hoop stress
A
x
i
a
l
s
t
r
e
s
s
-
Ax
i
a
l
s
t
r
e
s
s
Hoop stress
Design envelope
Long-term envelope
f2
A
x
i
a
l
s
t
r
e
s
s
A
x
i
a
l
s
t
r
e
s
s
GRP EN ISO 14692Design Envelope
Increase wall thickness!
Internal Pressure +
BendingX
-
Ax
i
a
l
s
t
r
e
s
s
A
x
i
a
l
s
t
r
e
s
s
GRP EN ISO 14692Design Envelope
XInternal Pressure
+Bending
f2= 0.67
A
x
i
a
l
s
t
r
e
s
s
Hoop stress
Design envelope
Long-term envelope
f2 9
-
I. Strength of components :Qualification.
II. Strength of pipe system :System Design.
III. Installation of pipe system :Training & Qualification.
ISO 14692 - part 2
ISO 14692 - part 3
ISO 14692 - part 4
Know the strength of installed pipeline
GRP EN ISO 14692
Site Quality PLan
Design Envelope
-
Site Quality Plan, describing:
Installation instructions.
Training + Qualification.
Installation in accordance with system design (isometrics)
QC.
GRP EN ISO 14692Site Quality Plan
-
Site Quality Plan, describing:
Installation instructions.
Training + Qualification.
Installation in accordance with system design (isometrics)
QC.
GRP EN ISO 14692Site Quality Plan
-
Site Quality Plan, describing:
Installation instructions.
Training + Qualification.
Installation in accordance with system design (isometrics)
QC.
GRP EN ISO 14692Site Quality Plan
-
ConclusionNeed to withstand soil and
traffic loadsNeed to pump from A to B
and want to know under what (safety) conditions
Example of standards:AWWA M45 / C950
EN 1796EN 14364
ISO TR 10465
Example of standards:ASME 31.3
UKOOAISO 14692
-
ConclusionNeed to withstand soil and
traffic loadsNeed to pump from A to B
and want to know under what (safety) conditions
Assessment of hoop stability
(Soil & Traffic Loads)
AWWA M45
Assessment ofintegrity of pipe system.
ISO 14692
Revision of ISO 14692
-
Application of Glass Fibre Reinforced Pipes
Why?
-
Why not? What do I buy?..... FRP, RTRP, GRE Glass, brittle at low temps. Standards? Dimensions Material Properties Calculations Joints, Glue?? Degeneration of properties in time
-
Why so? No corrosion
No corrosion allowance No cathodic protection
Long live (50 years design) Light weight Smooth walls, low friction Mechanical properties,
Flexible, Safe failure behaviour
Safe joints Adhesive bonded Mechanical, RSLJ, Key Lock.Tee-kay
Standards, ISO 14692
-
Wavistrong
MaterialEpoxy
Size Range 25 to 1600mm
Pressure range Up to 70 Bar
Temperature -60C to +110C
Red BoxYellow Box
Material Epoxy
Size Range 2 to 16
Pressure range Up to 3,500 psi
Temperature -65C to +100C
Fiberstrong
Material Polyester
Size Range 25 to 4000mm
Pressure range Up to 20 Bar
Temperature +65C
Fiberstrong
Material Vinylester
Size Range 25 to 4000mm
Pressure range Up to 20 Bar
Temperature +85C
Product Ranges
-
Materials & Methods of Construction
Considerations
Properties of the fibre
Properties of the resin
Ratio of fibre to resin
Geometry of fibres
Fibre
Resin
FRP Composite
Strain
T
e
n
s
i
l
e
S
t
r
e
s
s
-
Materials of Construction
Glass Fibres
C Glass / C Veil: Chemically resistant glass E Glass: Structurally strong
Continuous roving for pipe construction
Rolled matting for field lamination
-
Materials of ConstructionFibre orientation & fibre volume fraction
Chopped Strand
Woven Mat
Filament Wound
-
Materials of ConstructionResin Systems
Considerations Good mechanical properties
properties Good chemical properties
(liner) Good resistance to
environmental degradation
Plastic Deformation
E
l
a
s
t
i
c
D
e
f
o
r
m
a
t
i
o
n
Failure
Strain to failureStrain (%)T
e
n
s
i
l
e
S
t
r
e
s
s
Ult TensileStrength
-
Materials of ConstructionTypes of Resins
Other resins:Phenolics, Cynate Esters, Silicones, Polurethanes, Bismaleimides, Polymides
Polyester- A B A B A B A -
- A B A B A B A -SS S
Vinylester- A B A A A A - B A -
- A B A A A A - B A -S S
CatalystStyreneEster groups
EpoxyEpoxy Molecule
Amine Molecule
HardenerNo styreneNo ester groups
-
Continuous wound - sizes 300 to 4000 mm diam.
-
Continuous Wound - FIBERSTRONG
Infrared curing
Pure SilicaSandChopped
glass fibres Glass fibres
Chopped Strand
-
FIBERSTRONG - GRP / GRV Wall Structure
E Underground applications
Exterior surface
Structural wall (2)
Pipe core
Structural wall (1)
Liner back-upInner liner
-
FIBERSTRONG - Test Procedure
If you ma
ke a very
big pipe
??
-
FIBERSTRONG - Scope of Supply
Pressure classes Stiffness classes Size range Temperature range Installation type Design type
: PN 1, 3, 6, 10, 12, 16, 20: SN 2500, 5000, 10000: 350 mm to 4000 mm: -40 C 85 C: Above ground / Underground: Restrained / Unrestrained
-
FIBERSTRONG Jointing types
Laminated Joint 25mm to 4000mm
Double Bell Coupler 50mm to 4000mm
-
FIBERSTRONG
Applications
River & seawater intakes & outfalls
Gravity sewer lines Jacking & microtunneling WWT plant underground piping Irrigation main lines
-
Helical Wound - WAVISTRONG
-
Helical Wound diameters 25 1600 mm
Filament Wound
-
WAVISTRONG Production Process
-
WAVISTRONGGRE Wall Structure
0.3 mm epoxy coating .........0.3 mm epoxy coating .........EE--glass wall ....................glass wall ....................
0.5 mm Resin Liner .......0.5 mm Resin Liner .......
100%100%30%30%70%70%
ResinResin
0%0%70%70%30%30%
E(CR)E(CR)--glassglassCC--glassglass
GlassGlass
54
Test Pressure = 1.5 x designSafety Factor = 2 x designWeep Pressure = 4 x design
-
Standard Jointing Methods
LB/LS (rubber seal joint) / FB/LS (rubber seal lock joint)50mm to 1400mm
CB/CS (taper/straight) / TB/TS (taper/taper)25mm to 600mm
-
Laminated Joint - 25mm to 4000mm
Flange Joints to DIN & ANSI - 25mm to 4000mm
Standard Jointing Methods
-
WAVISTRONG - Scope of Supply
Pressure classes Size range Temperature range Installation type Design type
: PN 8, 10, 12.5, 16, 20, 25, 32, 40, 50: 25mm to 1600mm: From -40 C to 110 C: Above ground / Underground: Restrained / Unrestrained
-
WAVISTRONG - Applications
Crude oil Cooling water Fire fighting CO2 lines Water injection lines Well head tubing Potable water Sewer lines
-
WAVISTRONG Fittings
-
Laminated elbow
-
Prefabrication (Spools)
-
Utilisation of Prefabricated Spools
Effluent lines BP U.K.
-
Utilisation of Prefabricated Spools
Cooling water ID 800 mm Degussa Antwerp
-
Design of pipe systems: Testing
-
Design of pipe systems
Test Pressure : 1.5 x designSafety Factor : 2 x designWeep Pressure : 4 x design
Failure of pipe wall needs time
Long term testing
ASTM 2992 B
Regression curve
-
Long term testing acc. ASTM 2992-B
-
System design
E-modulus Support spans Expansion forces F = E x A x x T 10 times less than steel
Poisson Ratio Expansion by pressure
Expansion coeficient
Allowable stresses (Design Envelope) Isotrope (steel) vs anisotrope (GRE) = P x D / 2t
Safety factors (ASME B31.3, UKOOA, ISO 14692)