Encompass Automation & Engineering Technologies LLC

Industrial Automation & Power Distribution | Engineering | Project Management | Electrical Contracting & Installation | Turn-Key Project Services 622 Eckel Road, Perrysburg, OH 43551 USA/ Phone (419) 873-0000 / Fax (419) 872-2612 www.EAETech.com

Copyright 2010 EAET-LLC. Confidential and Intellectual Property / Not For Disclosure Nor Abstraction / All Rights Reserved

Scale Terminal Calibration

Mettler-Toledo IND560

Training Purposes Only2

How To : Traditional Calibration

Scale System Calibration

Main area of proficiency:- Mettler-Toledo IND560 Scale Terminal

Training Purposes Only3

How To : Traditional Calibration

Entering Setup Mode

Press the Down Arrow to viewthe SETUP softkey.

The configuration of the IND560 terminal is accessed through the SETUP softkey

Softkeys

Training Purposes Only4

How To : Traditional Calibration

With the Down Arrow navigate to Scale Sub-branch

Use the UP and DOWN navigation keys to move focus through the branches of the setup menu tree.

Press the RIGHT navigation key to expand a branch and the LEFT navigation key to collapse a branch. When the focus is on a sub-branch, focus can quickly be moved back to the main branch by pressing the LEFT navigation key.

When a branch such as Calibration is in focus, press the ENTER key to display the setup screen for that function.

Training Purposes Only5

How To : Traditional Calibration

Navigate to Calibration- Press the Down Arrow twice.

When at Calibration-Press Enter

Training Purposes Only6

How To : Traditional Calibration

Navigate to Calibration- Press the Down Arrow four (4) times.

Geo Code Base Serial Number

Calibration Units Linearity Adjust

Training Purposes Only7

How To : Traditional Calibration

Press Zero softkey - Remove all weight from scale

- Press Start

Training Purposes Only8

How To : Traditional Calibration

Press Span softkey

- Last test weight value of 100 Lb. is displayed

- Press Enter twice

- Add test weight either manually or via Automated Test Weight System

Training Purposes Only9

How To : Traditional Calibration

Span- Press Start

Training Purposes Only10

How To : Traditional Calibration

- Press Exit twice when done

- Unit will return to normal weighing mode

-Weigh Hopper Discharge Feeder needs to be placed back into Automatic.

Training Purposes Only

Encompass Automation LLC

Thank you !

11