eatsc.saeitc.orgeatsc.saeitc.org/standards/detail/docs/ts96-5.doc · rtf file2016-01-15 · sae...
TRANSCRIPT
NOTE: The issue status of this document remains unchanged as there have been no changes to the technical content.
SAE INDUSTRY TECHNOLOGIES CONSORTIA AEROSPACE STANDARDS AND PART QUALIFICATION PROGRAM FOREWORD
On the 1st January 2015 the SAE Industry Technologies Consortia (SAE ITC) acquired the ADS Aerospace Standards, previously known as the Society of British Aerospace Companies (SBAC) Aerospace Standards. The SAE ITC established in 2003 operates as a trade association as part of the SAE International Enterprise providing a unique framework serving the automotive, aerospace, and commercial vehicle sectors. Clients include private companies, government agencies, individuals, and trade associations. Building consensus and breakthrough barriers to achieve solutions, and the ways by which those solutions take shape, are tailored to each client’s individual needs.
The legal obligations and copyright authority of all Aerospace Standards that were issued by the ADS Group Limited are therefore assigned / transferred to the SAE ITC.
These Standards are produced by the SAE ITC with the assistance of, and for the benefit of the Aerospace Industry, as part of a continuous programme of Standardisation for Aerospace application under the control of the Technical Standards Committee (TSC) of the SAE ITC.
SAE ITC Standards are published as part of the series of SAE ITC Aerospace Industry Standards, and where appropriate, additional manufacturing and inspection requirements are issued as Reference Sheets (RS) or Technical Specifications (TS). It is the responsibility of those using or specifying a Standard to ensure the product, process, or manufacturer so used or specified, is appropriate for the task or role in question. The SAE ITC wishes to draw special attention to the fact Technical Specifications (TS) include testing and procedures by which a user or Design Authority can establish whether a particular manufacturer, prima facie, has the capability to produce hardware in accordance with the appropriate standards and related specifications.
The SAE ITC, its servants, or representatives accept no responsibility for the continued quality of hardware items produced against the relevant drawings and specifications; this responsibility remains with the user.
Whilst the SAE ITC takes all reasonable care in the preparation of its Standards, neither the SAE ITC, its officers, employees, servants, agents, or representatives, shall have any responsibility or liability whatsoever with respect to any act or omission (whether negligent or not) of whatsoever nature, or in connection with the preparation of the Standards or any part thereof. These responsibilities are those of the user or Design Authority. Users of SAE ITC Standards agree that any such liability on the part of the SAE ITC is excluded to the maximum extent permitted by law. SAE ITC Standards may be changed from time to time, and both users and manufacturers of these parts should ensure they are in possession of the latest issue of the Standards and supporting documentation before adoption or the commencement of production.
It is recommended that Technical Specification TS260, Metallic Materials List of Alternative Material Standards, be consulted prior to manufacture of SAE ITC products.
Each Standard is a facsimile or electronic reproduction of a master drawing and, therefore, any outline view scales stated are not necessarily reproduced accurately. A Master Index of all SAE ITC Aerospace Standards is published separately on the SAE ITC website.
All references to Standards include reference to RS and TS publications.
Details of this and any further information can be obtained from the SAE ITC.
SAE Industry Technologies Consortia provides that “This standard is published by SAE ITC to advance the state of technical and engineering sciences. The use of this standard is entirely voluntary and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”Copyright © 2015 SAE ITC.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without prior written permission of SAE ITC.
TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-772-7545 (outside USA)Fax: 724-776-0790Email: [email protected]
TECHNICAL SPECIFICATION
TS96™ ISSUE 5
Issued UNKNOWN Revised 2014-05
Recommendations for Similar Metallic Material Specifications and Standards
TECHNICAL SPECIFICATION
No. TS96
ADS RECOMMENDATIONS FORSIMILAR METALLIC MATERIAL SPECIFICATIONS
& STANDARDS
RATIONALE
Fifth issue of specification.Revised to add & remove preferred material specifications & standards & to deleteAppendix 1.
For full details of changes, refer to supplementary ADS Amendment Record documentTS96-AR.
Issued by: Technical Standards CommitteeADS Group LimitedRegistered in England and Wales no. 7016635
© 2014 Issue 5 May 2014
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 1 of 46
ADS Technical Specification No. TS96
ADS RECOMMENDATIONS FORSIMILAR METALLIC MATERIAL SPECIFICATIONS & STANDARDS
CONTENTS
Foreword
1. Scope2. Referenced Documents3. Introduction4. Index of Specifications5. BS/DTD Specifications superseded by other BS & DTD Specifications6. Tables of Materials & Specifications
Table 1A Aluminium Alloy - Sheet & Strip. Table 1B Aluminium Alloy - Plate.Table 1C Aluminium Alloy - Extruded Bar & Section. Table 1D Aluminium Alloy - Tube.Table 1E Aluminium Alloy - Forgings & Forging Stock.Table 1F Aluminium Alloy - Castings.Table 1G Aluminium Alloy - Wire for the Manufacture of Solid, Cold Forged
Rivets.Table 2A Magnesium Alloy - Castings. Table 2B Magnesium Alloy - Wrought.
Table 3A Non-Corrosion Resisting Steels - Sheet, Strip & Plate.Table 3B Non-Corrosion Resisting Steels - Bar, Forgings & Forging Stock. Table 3C Non-Corrosion Resisting Steels - Tube.Table 3D Non-Corrosion Resisting Steels - Castings & Remelting Stock. Table 3E Non-Corrosion Resisting Steels - Rod, Wire & Springs.
Table 4A Corrosion Resisting Steels - Sheet & Strip.Table 4B Corrosion Resisting Steels - Bar, Forgings & Forging Stock. Table 4C Corrosion Resisting Steels - Tube.Table 4D Corrosion Resisting Steels - Castings & Remelting Stock. Table 4E Corrosion Resisting Steels - Rod, Wire & Springs.
Table 5A Heat Resisting Alloys - Sheet, Strip & Plate.Table 5B Heat Resisting Alloys - Bar, Forgings & Forging Stock. Table 5C Heat Resisting Alloys - Tube.Table 5D Heat Resisting Alloys - Castings & Remelting Stock.Table 5E Heat Resisting Alloys - Bar/Wire for Springs & Fasteners.
Table 6A Titanium Alloys - Sheet, Strip & Plate.Table 6B Titanium Alloys - Bar, Section & Wire for Fasteners. Table 6C Titanium Alloys - Tube & Castings.Table 6D Titanium Alloys - Forgings & Forging Stock.
Table 7 Copper Alloys.Prepared by the Technical Standards Committee
ADS Group LimitedRegistered in England and Wales No. 7016635
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 2 of 46
1. SC O P E
This document provides a list of potential alternative metallic material specifications & standards for British Standard (BS) Aerospace & General Engineering & MoD Directorate of Technical Development (DTD). It is not, however, a design document & carries no design authority.
2. REFERENCE D DO CUMENTS
2.1 Informative ReferencesThe following documents, in whole or in part, are informatively referenced in this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
TS95 ADS Recommendations for Metallic Material Specifications & Standards to be used for New Designs.
TS260 Metallic Materials - List of Alternative Material Specifications& Standards Only Authorised for Use on ADS Standard Parts.
EN 2032-1 Metallic materials - Part 1: Conventional designation
ESDU 00932 Metallic Materials Data Handbook.
2.2 Listed Publication bodies
EN European Committee for Standardization (CEN). Available from NationalStandards Bodies e.g. British Standards Institution (BSI).
ESDU IHS Global Inc.TS ADS Group Limited.
3. I N T R O DU C T ION
3.1 In view of the difficulty in obtaining material supplies for both new & established designs, the ADS Metallic Materials Special Interest Group (MMSIG) was requested to formulate tables of similar materials to provide Potential Alternatives.
3.2 The MMSIG is aware that many of the larger Companies already possess lists of alternatives appropriate to their own products, but it is hoped that the Tables will be of help to those smaller manufacturing organisations who do not possess approved Design Teams.
3.3 The attached tables are the result of the MMSIG effort, but it is emphasised that considerable care must be taken before any specific substitution is made. In every case, it will be necessary to obtain local design & quality control approval; additionally the concurrence of the prime Contractor may be required.
3.4 Before any decision is taken to use an alternative material for a specific part, consideration must be given to all relevant mechanical & metallurgical properties, including:Strength, Ruling Section & Hardenability, Weldability, Formability, Processing Response.
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 3 of 46
3.5 The ASD-STAN designations quoted are those allocated in accordance with EN 2032-1.
3.6 Design properties for some of the materials included in this document are available inESDU 00932.
3.7 A list of preferred specifications for new designs is contained in TS95.
3.8 A list of alternative materials for ADS standard parts with design authority for these parts is contained in TS260.
3.9 Reference to any EN material standard means the National implementation of that standard e.g. BS EN.
3.10 Reference to any prEN material standard means an ASD-STAN Prestandard.
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 4 of 46
4. I NDEX O F SPEC I FI C A TI O NS MATL SPEC
REFERENCED FORM TABLE
BS B 8BS B 21BS B 23
BS B 24BS B 25
BS B 26
BS B 27
BS B 28
BS B 29
BS B 30
BS B 31
BS B 32
BS B 33
BS HC 1
BS HC 2
BS HC 3
BS HC 4BS HC 5BS HC 6BS HC 7BS HC 8BS HC 9BS HC 10BS HC 101BS HC 102BS HC 103BS HC 104BS HC 105BS HC 106BS HC 202BS HC 203BS HC 204BS HC 205BS HC 206BS HC 207BS HC 208BS HC 209BS HC 210BS HC 211BS HC 301BS HC 401
CastingsIngotsBar, Rod, Section, Forgings, & Forging StockRod & SectionRod, Section, Forgings & ForgingStockRod & Section
Tube
Strip, Foil & Parts
Strip, Foil & Parts
Strip, Foil & Parts
Strip, Foil & Parts
Rod, Section & Parts
Wire & Springs
Castings & Remelting Stock
Castings & Remelting Stock
Castings & Remelting Stock
Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock Castings & Remelting Stock
777
77
7
7
7
7
7
7
7
7
3D
3D
3D
3D3D3D3D3D3D3D4D4D4D4D4D4D5D5D5D5D5D5D5D5D5D5D5D3D
MATL SPECREFERENCED FORM TABLE
BS HC 402BS HC 403BS HC 404
BS HC 502
BS HR 1
BS HR 2
BS HR 3
BS HR 4
BS HR 5
BS HR 6
BS HR 10
BS HR 40
BS HR 51
BS HR 52
BS HR 53
BS HR 55
BS HR 201BS HR 202BS HR 203BS HR 204BS HR 205BS HR 206BS HR 207BS HR 208BS HR 209BS HR 240BS HR 401BS HR 402BS HR 403BS HR 404BS HR 501BS HR 502BS HR 503BS HR 504BS HR 505BS HR 506BS HR 601BS HR 650
Castings Castings Castings
Castings & Remelting Stock
Bar, Forgings & ForgingStockBar, Forgings & ForgingStockBar, Forgings & ForgingStockBar, Forgings & ForgingStockBar, Forgings & ForgingStockBar, Forgings & ForgingStockBar, Forgings & ForgingStockBar, Forgings & ForgingStockBar, Forgings & ForgingStockBar, Forgings & ForgingStockBar, Forgings & ForgingStockBar, Forgings & ForgingStockSheet, Strip & PlateSheet & StripSheet, Strip & PlateSheet & StripSheet & StripSheet, Strip & Plate Sheet, Strip & Plate Sheet, Strip & Plate Sheet, Strip & Plate Sheet & StripTube Tube Tube TubeWire for SpringsWire for SpringsWire for Thread Inserts Bar & Wire for Fasteners Wire for Thread Inserts Wire for Locking WireBar & Wire for FastenersBar & Wire for Fasteners
3D3D4D
7
5B
5B
5B
5B
5B
5B
5B
5B
5B
5B
5B
5B
5A5A5A5A5A5A5A5A5A5A5C5C5C5C5E5E5E5E5E5E5E5E
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 5 of 46
MATL SPECREFERENCED FORM TABLE
BS L 16BS L 17BS L 34BS L 34BS L 36BS L 37BS L 44BS L 44BS L 51BS L 54BS L 56BS L 58BS L 59BS L 60BS L 61BS L 63BS L 77BS L 78BS L 80BS L 81BS L 83BS L 83BS L 85BS L 85BS L 86BS L 87BS L 88BS L 93BS L 95BS L 97BS L 98BS L 99BS L 102BS L 103BS L 105BS L 109BS L 110BS L 111BS L 112BS L 113BS L 114BS L 115BS L 116BS L 117BS L 118BS L 119BS L 121BS L 122BS L 124BS L 125BS L 126BS L 127BS L 128BS L 154BS L 155BS L 156
Bar & Section Sheet & Strip Bar & SectionForgings & Forging StockWire for Rivets Wire for Rivets Bar & SectionForgings & Forging StockCastings Tube TubeWire for rivets Sheet & Strip Sheet & Strip Sheet & Strip TubeForgings & Forging StockCastings Sheet & Strip Sheet & Strip Bar & SectionForgings & Forging StockBar & SectionForgings & Forging StockWire for Rivets Hexagonal Bar Sheet & Strip PlatePlate Plate Plate CastingsBar & SectionForgings & Forging StockTubeSheet & Strip Sheet & Strip Bar & SectionForgings & Forging StockSheet & StripTube Plate Tube Tube Tube Castings Castings Castings Castings Castings Castings Castings Castings Castings CastingsSheet & Strip
1A1A1C1E1G1G1C1E1F1D1D1G1A1A1A1D1E1F1A1A1C1E1C1E1G1C1A1B1B1B1B1F1C1E1D1A1A1C1E1A1D1B1D1D1D1F2A2A2A2A2A2A2A1F1F1A
MATL SPECREFERENCED FORM TABLE
BS L 157BS L 158BS L 159BS L 160BS L 161BS L 162BS L 163BS L 164BS L 165BS L 166BS L 167BS L 168BS L 169BS L 170BS L 171BS L 172BS L 173BS L 174BS L 503BS L 504BS L 505BS L 508BS L 509BS L 512BS L 513BS L 514BS L 515
BS S 1BS S 14BS S 15BS S 21BS S 28BS S 61BS S 62BS S 70BS S 79BS S 80BS S 82BS S 91BS S 92BS S 93BS S 95BS S 97BS S 98BS S 99BS S 102BS S 105BS S 106BS S 111BS S 112BS S 113BS S 114BS S 116BS S 117
Sheet & Strip Sheet & Strip Sheet & Strip Bar & SectionForgings & Forging Stock Forgings & Forging Stock Sheet & StripSheet & StripSheet & Strip Sheet & Strip Sheet & Strip Bar & Section CastingsBar & Section Forgings Forging Stock Castings CastingsTubeSheet & Strip Bar & Section Bar & Section TubeBar & SectionForgings & Forging Stock Forgings & Forging Stock Sheet & Strip
BarBar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar & Forging StockBar, Forgings & Forging Stock Bar, Forgings & Forging Stock BarBarBar, Forgings & Forging StockBarBar, Forgings & Forging Stock
1A1A1A1C1E1E1A1A1A1A1A1C1F1C1E1E1F1F2B2B2B2B2B2B2B2B2B
3B3B3B3B3B4B4B3B3B4B3B3B3B3B3B3B3B3B3B3B3B3B3B3B3B3B3B
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 6 of 46
MATL SPECREFERENCED FORM TABLE
BS S 119BS S 120BS S 124BS S 125BS S 126BS S 127BS S 128BS S 129BS S 130BS S 131BS S 132BS S 133BS S 134BS S 135BS S 136BS S 137BS S 138BS S 139BS S 140BS S 141BS S 142BS S 143BS S 144BS S 145BS S 146BS S 147BS S 148BS S 149BS S 150BS S 151BS S 152BS S 153BS S 154BS S 155BS S 156BS S 157BS S 158BS S 159BS S 160BS S 161BS S 162BS S 163BS S 201BS S 202BS S 203BS S 204BS S 205BS S 206BS S 510BS S 511BS S 513BS S 514BS S 515BS S 516BS S 517BS S 524
Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock BarBar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar & Forging StockBar & Forging StockBar & Forging StockBar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar & Forging StockBar & Forging StockBarBar, Forgings & Forging Stock Bar, Forgings & Forging Stock Bar, Forgings & Forging Stock Wire & SpringsWire & Springs Wire & Springs Wire & Springs Wire & SpringsRod, Wire &,SpringsSheet & Strip Sheet & Strip StripSheet & Strip Sheet & Strip Sheet & Strip Sheet & Strip Sheet & Strip
3B3B4B4B4B4B4B4B4B3B3B3B3B3B3B3B3B3B3B4B3B4B4B4B3B3B3B3B4B4B4B3B3B3B3B3B3B4B4B4B3B3B3E3E3E3E4E4E3A3A3A3A3A3A3A4A
MATL SPECREFERENCED FORM TABLE
BS S 525BS S 526BS S 527BS S 528BS S 529BS S 530BS S 531BS S 532BS S 533BS S 534BS S 535BS S 536BS S 537BS S 538
BS T 2BS T 45BS T 51BS T 53BS T 57BS T 60BS T 64BS T 66BS T 67BS T 68BS T 69BS T 72BS T 73BS T 74BS T 75BS T 76BS T 77BS T 78BS T 79BS T 80
BS TA 1BS TA 2BS TA 3BS TA 4BS TA 5BS TA 6BS TA 7BS TA 8BS TA 9BS TA 10BS TA 11BS TA 12BS TA 13BS TA 21BS TA 22BS TA 23BS TA 24BS TA 25
Sheet & Strip Sheet & Strip Sheet & Strip Sheet & Strip Sheet & Strip Sheet & Strip Sheet & Strip Sheet & Strip Sheet & Strip Sheet & Strip Sheet & Strip Sheet & Strip Sheet & Strip Sheet & Strip
Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube
Sheet & Strip Sheet & Strip BarForging StockForgings Sheet & Strip BarForging Stock Forgings SheetBarForging Stock Forgings Sheet & Strip BarForging StockForgingsBar
4A4A4A4A4A4A4A4A4A3A3A4A4A4A
3C3C7
3C3C3C3C4C4C4C4C4C4C4C4C3C3C3C3C4C
6A6A6B6D6D6A6B6D6D6A6B6D6D6A6B6D6D6B
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 7 of 46
MATL SPECREFERENCED FORM TABLE
BS TA 26BS TA 27BS TA 28BS TA 38BS TA 39BS TA 40BS TA 41BS TA 42BS TA 43BS TA 44BS TA 45BS TA 46BS TA 47BS TA 48BS TA 49BS TA 50BS TA 51BS TA 52BS TA 53BS TA 54BS TA 55BS TA 56BS TA 57BS TA 58BS TA 59
Forging StockForgingsWire for FastenersBarForging StockBarForging Stock Forgings Forging Stock ForgingsBarBarForging StockForgingsBarForging Stock Forgings Sheet & Strip BarForging StockForgings Plate Plate PlateSheet & Strip
6D6D6B6B6D6B6D6D6D6D6B6B6D6D6B6D6D6A6B6D6D6A6A6A6A
MATL SPECREFERENCED FORM TABLE
DTD 118DTD 142DTD 150DTD 161DTD 167DTD 189DTD 246DTD 253DTD 271DTD 297DTD 297DTD 319DTD 372DTD 503DTD 716DTD 720DTD 722DTD 727DTD 731DTD 735DTD 737DTD 740DTD 5004DTD 5005DTD 5008DTD 5010DTD 5013DTD 5014DTD 5015DTD 5018DTD 5023DTD 5024DTD 5025DTD 5030DTD 5035DTD 5036DTD 5040DTD 5041DTD 5044DTD 5045DTD 5052DTD 5055
DTD 5062DTD 5070DTD 5073DTD 5081DTD 5082DTD 5086DTD 5091DTD 5094DTD 5100DTD 5101DTD 5110DTD 5111DTD 5112DTD 5114
Sheet & Strip Bar & Section ForgingsRod, wireTubeWire, Rivets & Split Pins Forgings & Forging Stock TubeStripBar & SectionForgings & Forging StockTubeBar & SectionTube Castings Rod, wire Castings CastingsForgings & Forging StockCastings Tube TubeForgings & Forging StockCastings Castings PlateBarBar & Section Castings Castings Sheet & Strip Forgings CastingsPlateCastingsWire, Rivets & Split PinsPlateBar & Section Bar & Section CastingsPlateCastings Sheet & Strip Sheet & StripTubePlateBar, Forgings & Forging StockRod, Wire & Springs Sheet & Strip ForgingsPlateSheet & StripPlateForgings & Forging StockSheetBar & Section
2B2B1E4E3C4E1E7
4E1C1E7
1C3C1F3E1F1F1E1F2B3C1E2A1F1B6B1C2A1F6A1E2A1B2A4E1B2B1C2A3A2A
3A1A6C2B3B4E2B1E1B2B1B2B3A1C
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 8 of 46
MATL SPECREFERENCED FORM TABLE
DTD 5120DTD 5130DTD 5132DTD 5142DTD 5152DTD 5222
DTD 5232
DTD 5273DTD 5283DTD 5289DTD 5293DTD 5363DTD 5636DTD 5638DTD 5639
Plate Plate Tube Tube WireBar, Forgings & ForgingStockBar, Forgings & ForgingStockBarForging Stock Castings Forgings CastingsForgings & Forging Stock Bar & Wire for Fasteners Bar & Wire for Fasteners
1B1B3C3C3E3B
3B
6B6D4D6D6C1E5E5E
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 9 of 46
5. BS / D T D SPEC I FI C A T I O NS SUPERSEDED BY O T HER BS & D T D SP E C I FI C A T IO N S
SUPERSEDED SPECIFICATION
REFER TOSPECIFICATION TABLE
HC 501HR 11HR 54L 1L 3L 38L 39L 40L 43L 45L 47L 62L 64L 65L 67L 70L 71L 72L 73L 76L 89L 90L 104L 106L 107L 108L 150L 151L 152L 153L 501L 502L 506L 507S 2S 3S 4S 6S 11S 19S 35S 65S 69S 81S 84S 86S 90S 94S 96S 103S 107S 108S 109
HC 502HR 55S 150L 102L 166L 164, L 163L 102L 168, L 77L 77L 168, L 77L 165L 105L 102L 168, L 77L 116L 156L 157L 163, L 164L 165L 103L 166L 167L 157L 156L 164L 166L 157L 164L 165L 164L 512L 513L 514L 515S 95, S 154S 510S 514S 93S 95, S 154S 62S 1S 97S 95, S 154S 97S 511S 514S 157S 154S 154S 148S 157S 125, S 126S 127, S 128
75B4B1C1A1A1C
1C, 1E1E
1C, 1E1A1D1C
1C, 1E1D1A1A1A1A1E1A1A1A1A1A1A1A1A1A1A2B2B2B2B3B3A3A3B3B4B3B3B3B3B3A3A3B3B3B3B3B4B4B
SUPERSEDED SPECIFICATION
REFER TOSPECIFICATION TABLE
S 110S 518S 519S 520S 521S 522S 523
T 4T 9T 35T 55T 58T 59T 65
TA 29TA 30TA 31TA 32TA 33TA 34TA 35TA 36TA 37
DTD 1DTD 2DTD 3DTD 4DTD 5DTD 7DTD 8DTD 10DTD 12DTD 14DTD 18DTD 19DTD 21DTD 22DTD 23DTD 42DTD 43DTD 49DTD 57DTD 59DTD 76DTD 88DTD 89DTD 100DTD 105DTD 110DTD 111
S 129, S 130S 534S 535S 524, S 525S 526, S 527S 528, S 529S 530, S 531
L 105L 54T 64T 66, T 67T 68, T 69T 77T 77
TA 45TA 47TA 48TA 46TA 47TA 48TA 46, TA 49TA 47, TA 50TA 48, TA 51
S 82S 15S 157S 204S 202S 97S 97HR 205S 511B 21L 103S 28S 61S 62DTD 161, DTD 189S 526, S 527S 129, S 130S 111S 524, S 525L 121S 80L 513T 45S 514T 80L 37L 163, L 164
4B3A3A4A4A4A4A
1D1D3C4C4C3C3C
6B6D6D6B6D6D6B6D6D
3B3B3B3E3E3B3B5A3A7
1E3B4B4B4E4A4B3B4A2A4B2B3C3A4C1G1A
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 10 of 46
SUPERSEDED SPECIFICATION
REFER TOSPECIFICATION TABLE
DTD 113DTD 124DTD 126DTD 127DTD 130DTD 133DTD 137DTD 138DTD 141DTD 144DTD 148DTD 149DTD 156DTD 166DTD 171DTD 176DTD 178DTD 187DTD 188DTD 197DTD 203
DTD 207
DTD 209DTD 211DTD 213DTD 215DTD 233DTD 239DTD 247DTD 252DTD 254DTD 259DTD 265DTD 276DTD 278DTD 281DTD 285DTD 287DTD 289DTD 292DTD 293DTD 289DTD 299DTD 303DTD 306DTD 310DTD 323DTD 327DTD 328DTD 330DTD 331DTD 342DTD 347DTD 348DTD 351
T 64S 514S 92L 512L 83L 51S 516S 517S 511S 526, S 527L 36DTD 167S 129, S 130S 524, S 525S 526, S 527S 129, S 130T 53S 513S 114B 23T 80
T 66, T 67
L 80T 68, T 69L 59S 201HC 402S 203S 131L 168T 57L 512B 24L 78L 80L 124L 125L 51L 122L 80L 83L 122S 91L 58S 106L 56B 27L 86HR 208DTD 5092, DTD 5102S 99L 165T 77L 503L 165
3C3A3B2B
1C, 1E1F3A3A3A4A1G3C4B4A4A4B3C3A3B7
4C
4C
1A4C1A3E3D3E3B1C3C2B7
1F1A2A2A1F2A1A
1C, 1E2A3B1G3B1D7
1G5A3B3B1A3C2B1A
SUPERSEDED SPECIFICATION
REFER TOSPECIFICATION TABLE
DTD 356DTD 359DTD 363DTD 364DTD 390DTD 408DTD 410DTD 412DTD 423DTD 463DTD 464DTD 473DTD 480DTD 485DTD 490DTD 493DTD 498DTD 500DTD 504DTD 519DTD 525DTD 529
DTD 546DTD 600DTD 603DTD 606DTD 610DTD 619DTD 622DTD 626DTD 634DTD 646DTD 650DTD 653DTD 666DTD 683DTD 687DTD 703DTD 705DTD 708DTD 710DTD 712DTD 713DTD 715DTD 719DTD 721DTD 723DTD 726DTD 729DTD 730DTD 736DTD 743DTD 746DTD 747DTD 748
L 157T 53, T 77L 170L 168L 163, L 164T 60L 83HC 502L 85S 80L 63S 98S 95HC 403S 154S 531B 25S 99B 26S 157S 124S 125, S 126, S 127, S 128L 165S 95L 156L 81L 164L 514L 505L 504L 80L 157S 112L 60HC 9DTD 5024, DTD 5114L 88HR 203HC 8, HC 10L 126L 166S 536T 79S 137HC 404L 127T 78L 505L 514S 132HR 1T 72, T 73L 167HR 2L 128
1A3C1C1C1A3C
1C, 1E7
1C, 1E4B1D3B3B
3B4A7
3B7
3B4B4B
1A3B1A1A1A2B2B2B1A1A3B1A3D
1C, 1E1A5A3D2A1A4A3C3B4D2A3C2B2B3B5B4C1A5B2A
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 11 of 46
SUPERSEDED SPECIFICATION
REFER TOSPECIFICATION TABLE
DTD 749DTD 5001DTD 5002DTD 5003DTD 5006DTD 5007DTD 5011DTD 5012DTD 5016DTD 5017DTD 5019DTD 5020DTD 5021DTD 5022DTD 5026DTD 5027DTD 5028DTD 5033DTD 5046DTD 5047DTD 5050DTD 5054DTD 5060DTD 5063DTD 5067DTD 5072DTD 5074DTD 5076DTD 5077DTD 5080DTD 5087DTD 5090DTD 5103
DTD 5104DTD 5113DTD 5123DTD 5124DTD 5133DTD 5153DTD 5163DTD 5172DTD 5173DTD 5183DTD 5192DTD 5193DTD 5199DTD 5203
DTD 5209DTD 5212DTD 5219DTD 5223DTD 5229DTD 5233DTD 5239
L 512L 515S 133DTD 5273, DTD 5283S 205HR 3L 508S 134T 72, T 73HR 4B 27L 93L 509S 135HR 650HR 202L 99TA 1S 538HR 207L 95DTD 5114DTD 5110TA 6HR 4HC 8, HC 10L 170HR 650HR 601L 113HR 506L 97, L 98TA 45, TA 46, TA 47, TA 49, TA 50L 171, L 172TA 25TA 22, TA 23L 170TA 21TA 48, TA 51TA 59, TA 10HC 7, HC 9TA11, TA12TA 2S 163TA 6HC 1TA 38, TA 39, TA 40, TA 41HC 2S 162HC 3TA 42HC 4TA 52HC 5
2B2B3B
6B, 6D4E5B2B3B4C5B7
1B2B3B5E5A1F6A4A5A1B1C1B6A5B3D1C5E5E1A5E1B
6B, 6D
1E6B
6B, 6D1C6A6D6A3D
6B, 6D6A3B6A3D
6D, 6E
3D3B3D6D3D6A3D
SUPERSEDED SPECIFICATION
REFER TOSPECIFICATION TABLE
DTD 5243DTD 5249DTD 5253DTD 5259DTD 5263DTD 5269DTD 5279DTD 5299DTD 5309
TA 53HC 6TA 54HC 103TA 55HC 104HC 105HC 101HC 102
6B3D6D4D6D4D4D4D4D
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 12 of 46
6. T A B L ES O F M A TER I A L S & SPEC I FI C A T IO N S
TABLE 1A - ALUMINIUM ALLOY - SHEET & STRIP
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSASD-STAN ALLOY
DESIGNATION TEMPERASD-STANprEN / EN USA
L 16 CurrentAL-P1200-
AL-P3103-
AL-P5251-
AL-P7075- clad
AL-P2024- clad
AL-P6082-
AL-P2014A
AL-P2014A clad
AL-P2618A clad
H14/H24 3996 AMS 4003
L 17
L 59
Current
Withdrawn
0
H16/H26
-
4004
AMS 4001
-
L 60 Withdrawn H12/H22 - -
L 61
L 80
Withdrawn
Current
0
0
-
-
AMS 4006
-
L 81
L 88
L 109
Current
Withdrawn
Withdrawn
H16/H26
T6/T62
T3
-
2092
2090
-
AMS 4049
AMS-QQ-A-250/5 - T3AMS 4041
L 110
L 113
L 156
Withdrawn
Withdrawn
Withdrawn
T42
T6/T62
T4/T42
2703
4007
2395
AMS-QQ-A-250/5 - T42
-
-L 158 Withdrawn
L 157 WithdrawnT6/T62
T3
2089
-
AMS 4029
-
L 159
L 163
Withdrawn
Withdrawn
L 164 CurrentT4/T42 2088
AMS-QQ-A-250/3- T4/T42L 166 Withdrawn
L 165 CurrentT6/T62
T62
2087
3552
AMS-QQ-A-250/3- T6/T62
-
L 167
DTD 5070
Withdrawn
Withdrawn
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 13 of 46
TABLE 1B - ALUMINIUM ALLOY – PLATE
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSASD-STAN ALLOY
DESIGNATION TEMPERASD-STANprEN / EN USA
L 93 Current AL-P2014A T651 2124 AMS 4029
DTD 5010 Withdrawn - T4 - -
L 95 Current AL-P7075- T651 2126AMS -QQ-A-250/12 -
T651AMS 4045
L 97 Withdrawn AL-P2024- T351 2422 -
L 98 Withdrawn AL-P2024- T42 4247 AMS-QQ-A-250/4 - T42
L 115 Withdrawn AL-P6082- T651 4202 -
DTD 5030 WithdrawnAL-P2014A clad
T4 - -
DTD 5040 Withdrawn T6 - -
DTD 5100 Withdrawn AL-P2024- clad T351 4211 (T42)AMS-QQ-A-250/5 - T351
AMS 4034
DTD 5110 Withdrawn AL-P7075- clad T6 - AMS 4049
DTD 5120 WithdrawnAL-P7010-
T7651 2684 AMS 4204
DTD 5130 Withdrawn T7451 2687 AMS 4205
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 14 of 46
TABLE 1C - ALUMINIUM ALLOY - EXTRUDED BAR & SECTION
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSASD-STAN ALLOY
DESIGNATION TEMPERASD-STANprEN / EN USA
L 34
L 44
L 83
L 85
L 87 *
L 102
Current
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Obsolescent
AL-P1200-
AL-P5251-
AL-P2031-
-
AL-P2014A
AL-2014A
AL-P6082-
AL-P7075-
-
AL-P6063-
AL-P2618A
AL-P7014-
-
F/O F/O
T6/T6511
T6/T6511
T6
T4511
-
-
-
-
-
2100
-
-
-
-
-
-
2634 (PCGC)** -
L 168
L 111
L 160
Current
Obsolescent
Obsolescent
T62324 AMS 4153
2639 (PCGC)** -
T6511
T6
2384 -
2635 (PCGC)**
2326
-
-
2636 (PCGC)** -
T6511
T73511
4273 -
4274 (PCGC)**
2127
-
AMS 4617
2632 (PCGC)** -
L 170
DTD 297
DTD 372
DTD 5014
DTD 5044
DTD 5114
Current
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
T65102698 AMS 4514
2707 (PCGC)** -
T6511
O
T4
T6511
T6511
T6/T6511
2394 AMS 4514
2631 (PCGC)**
-
-
3553
-
-
-
-
-
-
-
-
* Hexagonal bar for nuts, couplings & hollow machined parts
** PCGC = Peripheral coarse grain control
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 15 of 46
TABLE 1D – ALUMINIUM ALLOY TUBE
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSASD-STAN ALLOY
DESIGNATION TEMPER TYPEASD-STANprEN / EN USA
L 54 Current AL-P1200- F Hydraulic - -
L 116 Withdrawn AL-P99.5 F Weldable 2073 -
L 56 Current AL-P5251- 0 Hydraulic -AMS 4071
AMS-WW-T-700/4 (non-current) (0)
L 63 Current AL-P2014A T8 Structural 2387 -
L 105 CurrentAL-P6082-
T3 Structural 3346 -
T4/42 Structural 2389 -
L 114 Current T6/T62 Structural 2390 -
L 117 Current
AL-P6061-
T6 Structural 2392AMS 4082
AMS-WW-T-700/6F (T6)
L 118 Current T6 Hydraulic 2813AMS 4083 (T6) AMS 4081 (T4)
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 16 of 46
TABLE 1E - ALUMINIUM ALLOY - FORGINGS & FORGING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSASD-STAN ALLOY
DESIGNATION TEMPERPRODUCT
FORMASD-STANprEN / EN
USA
L 34 Current AL-P1200-F/O Forgings - -
F Forging Stock - -
L 44 Withdrawn AL-P5251-F/O Forgings - -
F Forging Stock - -
L 83 Withdrawn
AL-P2031-
T6 Forgings - -
F Forging Stock - -
L 85 WithdrawnT6 Forgings - -
F Forging Stock - -
L 77 Current
AL-P2014A
T6 Forgings 2382 AMS 4133
L 103 Withdrawn T4 Forgings 2383 AMS 4134
L 77 / L 103 Current/Withdrawn F Forging Stock 2485 -
L 112 Current AL-P6082-T6 Forgings - -
F Forging Stock
L 161 Withdrawn
AL-P7075-
T73 Die forgings 3880 AMS 4141
T73 Hand forgings 3881 -
L 162 Withdrawn T7352 Hand forgings 2386 AMS 4147
L 161 / L 162 Withdrawn F Forging Stock 2488 AMS 4141
L 171 CurrentAL-P7014-
T761 Forgings - -
L 172 Current F Forging Stock - -
DTD 5024 Withdrawn -T6 Forgings - -
F Forging Stock - -
DTD 5094 Withdrawn -T6 Forgings - -
F Forging Stock - -
DTD 150 Withdrawn - T4 Forgings - -
DTD 246 Withdrawn -T6 Forgings - -
F Forging Stock - -
DTD 297 Withdrawn -0 Forgings - -
F Forging Stock -
DTD 731 Withdrawn AL-P2618AT6 Die & Hand
forgings 2085AMS 4132
F Forging Stock 2486
DTD 5004 Withdrawn -T6 Forgings - -
F Forging Stock - -
DTD 5636 Withdrawn AL-P7010-T74 Die forgings 2681 -
F Forging Stock 4287 -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 17 of 46
TABLE 1F - ALUMINIUM ALLOY - CASTINGS
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSASD-STAN
ALLOY DESIGNATION
COMMON NAME TEMPER TYPE ASD-STAN
prEN / ENUSA
L 51 Withdrawn - - T5
SandCastings - -
ChillCastings - -
L 78 Withdrawn - 355 T6
SandCastings - AMS 4212
ChillCastings - -
L 119 Current AL-C21201 RR350 T6 SandCastings 2725 -
L 154
L 155
L 169
L 99
L 173
Current
Current
Current
Current
Current
AL-C21001
-
AL-C42201
AL-C42101
-
-
-
A357
A356
-
T4
T6
T6
T6
T7
F
SandCastings 2721 -
ChillCastings
SandCastings
2722
2723
-
-
ChillCastings
SandCastings
2724
2726
-
AMS 4219
AMS 4218
-
ChillCastings
SandCastings
2727
2728
ChillCastings
ChillCastings
2729
-
L 174
DTD 716
Current
Withdrawn
-
-
-
-
SandCastings
SandCastings
-
-
-
-
ChillCastings - -
DTD 722
DTD 727
Withdrawn
Withdrawn
-
-
-
-
T5
T4
SandCastings - -
ChillCastings
SandCastings
-
-
-
-
ChillCastings - -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 18 of 46
TABLE 1F (cont) - ALUMINUM ALLOY - CASTINGS
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSASD-STAN
ALLOY DESIGNATION
COMMON NAME TEMPER TYPE ASD-STAN
prEN / ENUSA
DTD 735
DTD 5008
DTD 5018
Withdrawn
Withdrawn
Withdrawn
-
-
-
-
D712
-
T6
T1, T2
T4
SandCastings - -
ChillCastings
SandCastings
SandCastings
-
-
-
-
-
-
ChillCastings - -
TABLE 1G - ALUMINUM ALLOY - WIRE FOR THE MANUFACTURE OF SOLID, COLD FORGED RIVETS
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSASD-STAN
ALLOY DESIGNATION
SUPPLY TEMPER
TEST TEMPER
ASD-STANprEN / EN
USA
L 36
L 37
L 58
L 86
Current
Current
Withdrawn
Withdrawn
AL-P1050A
AL-P2014A
AL-P5056A
AL-P2217-
F
H13
0
F
F
T42
0
T42
2114
-
2628
2116
QQ-A-430 1100 (not for new design)
-
QQ-A-430 5056 (not for new design)
QQ-A-430 2117 (not for new design)
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 19 of 46
TABLE 2A - MAGNESIUM ALLOY - CASTINGS
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSASD-STAN
ALLOY DESIGNATION
COMMON NAME TEMPER TYPE
ASD-STANprEN / EN USA
L 121 Withdrawn
MG-C18001AZ8AZ81A
FSand Castings - -
Chill Castings - -
L 122 Current T4Sand Castings - -
Chill Castings - -
L 124 Withdrawn
-
AZ91AZ91A
T4Sand Castings - -
Chill Castings - -
L 125 WithdrawnT6
Sand Castings - AMS 4437
Chill Castings - -
AZ91C T6 InvestmentCastings - AMS 4452
L 126 Current MG-058002ZRE1EZ33A T5
Sand Castings 2735 AMS 4442
Chill Castings 2736 -
L 127 Withdrawn MG-C83001Z5Z ZK51A T5
Sand Castings - AMS 4443
Chill Castings - -
L 128 Current MG-C85001RZ5ZE41A T5
Sand Castings 2738 AMS 4439
Chill Castings 2739 -
DTD 5005 Withdrawn MG-058001ZT1HZ321A T5
Sand Castings 2733 -
Chill Castings 2734 -
DTD 5015 Withdrawn MG-C85002TZ6ZH62A
T5Sand Castings - -
Chill Castings - -
DTD 5025 Withdrawn - MSR-A T6Sand Castings - -
Chill Castings - -
DTD 5035 Withdrawn MG-C46001 MSR-B T6Sand Castings 2731 -
Chill Castings 2732 -
DTD 5045 Withdrawn - ZE63 T6Sand Castings - AMS 4425
(Non current)
Chill Castings - -
DTD 5055 Withdrawn - QE22A- T6Sand Castings - AMS 4418
Chill Castings - -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 20 of 46
TABLE 2B - MAGNESIUM ALLOY – WROUGHT
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSASD-STAN
ALLOY DESIGNATION
COMMON NAME TEMPER TYPE
ASD-STANprEN / EN
USA
DTD 5111
DTD 5091
Withdrawn
Withdrawn
-
-
ZTY
ZM21
F
0
Forgings &forging Stock
Sheet & strip
-
-
-
-
DTD 5101 Withdrawn H14 Sheet & strip - -
DTD 118 Withdrawn
-AM503MIA
F
Sheet & strip - -
DTD 142 WithdrawnBar & extruded section
- -
DTD 737 Withdrawn Tube - -
DTD 5041
L 508
Withdrawn
Withdrawn
-
-
Al 6.0 Zn 1.0
Zn 3.0 Zr 0.6
ZW6
ZW1ZK10
AZM AZ61A
ZW3
T5
F
F
F
Bar & extruded section
Bar & extruded section
-
-
-
-
L 509 Withdrawn Tube - -
L 515
L 503
Withdrawn
Withdrawn
Sheet & strip
Tube
-
-
-
-
L 512 WithdrawnBar & extruded section
- AMS 4350
L 513
DTD 5081
Current
Withdrawn
Forgings &forging Stock
Plate
-
-
-
-
L 504 Withdrawn Sheet & strip - -
L 505 WithdrawnBar & extruded section
- -
L 514 WithdrawnForgings &forging Stock
- -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 21 of 46
TABLE 3A - NON-CORROSION RESISTING STEELS - SHEET, STRIP & PLATE
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN
USA
S 510 CurrentCarbon steel, weldable
- Sheet & strip - -
S 511 WithdrawnDeep drawing carbon steel, weldable
- Sheet & strip - -
S 513
S 514
Current
Current
Spring steel
C-Mn steel, weldable
C-Mn steel, weldable
Cr-Mo steel, weldable (4130)
Ni-Cr-Mo-Vsteel
Mo-B steel, weldable
1% Cr-Mo steel, weldable
-
-
FE-PL1502 (25CrMo4)
-
-
-
Strip
Sheet & strip
-
-
-
-
S 515
S 516
Current
Withdrawn
Sheet & strip
Sheet & strip
-
-
-
-
S 517
S 534
Withdrawn
Current
Sheet & strip
Sheet & strip
-
2209
-
AMS-S-6758 (non current)
S 535
DTD 5052
DTD 5062
DTD 5112
Current
Withdrawn
Withdrawn
Withdrawn
Sheet & strip
Plate
Sheet & strip
Sheet
-
-
-
-
-
-
-
-
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 22 of 46
TABLE 3B - NON-CORROSION RESISTING STEELS - BAR, FORGINGS & FORGING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN USA
S 1
S 14
S 15
S 21
S 28
S 70
S 79
S 82
S 91
S 92
S 93
S 95
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Current
Withdrawn
Current
Current
Withdrawn
Carbon steel
Carbon case hardening steel
3% Ni case hardening steel
'20' carbon steel, weldable
4% Ni-Cr-Mo steel(air hardening)
'55' carbon steel(normalized)
'55' carbon steel (hardened & tempered)
4% Ni-Cr-Mo casehardening steel
Mild steel (suitable for bearing shells)
C-Mn steel, weldable
'40' carbon steel(normalized)
1½ % Ni-Cr-MoSteel (4340)
-
-
-
-
-
-
-
FE-PL2110(16NiCrMo16)
-
-
-
-
Bar
Bar
-
-
-
-
Forgings - -
Forging Stock
Bar
-
-
-
-
Forgings - -
Forging Stock
Bar
-
-
-
-
Forgings - -
Forging Stock
Bar
-
-
-
-
Forgings - -
Forging Stock
Bar
-
-
-
-
Forgings -
Forging Stock
Bar
-
-
-
-
Forgings - -
Forging Stock
Bar
-
2767
-
-
Forgings 2768 -Forging Stock
Bar
3522
-
--
Forgings - -
Forging Stock
Bar
-
-
-
-
Forgings - -
Forging Stock
Bar
-
- -
Forgings - -
Forging Stock
Bar
-
3519
-
AMS 6415Forgings 2455
Forging Stock 3520
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 23 of 46
TABLE 3B (cont) - NON-CORROSION RESISTING STEELS - BAR, FORGINGS & FORGING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN USA
S 97
S 98
Withdrawn
Current
2½ % Ni-Cr-Mo steel
2½ % Ni-Cr-Mo steel (high carbon)(4340)
C-Mo steel (manufacture of forged bolts only)
Carbon steel (manufacture of forged bolts only)
3% Cr-Mo nitriding steel
Ni-Cr-W valve steel
Semi-free cutting carbon steel (primarily intended for manufacture of forged nuts)
'40' carbon steel (primarily intended for manufacture of forged nuts)
Mn-Mo steel
-
-
-
-
-
-
-
-
-
Bar - -
Forgings - -
Forging Stock
Bar
-
-
-
-
Forgings - -
Forging Stock - -
S 99
S 102
S 105
S 106
S 111
S 112
S 113
S 114
Current
Current
Withdrawn
Current
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Bar -
AMS 6415Forgings -
Forging Stock
Bar
-
- -
Forgings -
Forging Stock
Bar
-
- -
Forging Stock
Bar
-
-
-
AMS 6475Forging Stock
Forgings
-
- -
Forging Stock
Bar
Bar
Bar
--
-
-
-
-
-
-
-
Forgings - -
Forging Stock - -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 24 of 46
TABLE 3B (cont) - NON-CORROSION RESISTING STEELS - BAR, FORGINGS & FORGING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN USA
S 116
S117
S 119
S 120
S 131
S 132
S 133
S 134
S 135
S 136
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Current
Current
Withdrawn
Current
Current
Current
'40' carbon steel (primarily intended for manufacture ofmachined bolts)
1% Cr steel
1½ % Ni-Cr-Mo steel
2½ % Ni-Cr-Mo steel (oil hardening)
High thermal expansion steel
3% Cr-Mo-Vnitriding steel
¾% Ni-Cr case hardening steel
3% Cr-Mo-V steel(air hardening)
1% C-Cr steel, suitable for bearings (52100)
1% C-Cr steel (vacuum arc remelted), suitable for bearings
(52100 VAR)
-
-
-
-
-
-
-
-
FE-PL1801 (100Cr6)
FE-PL1802 (100Cr6)
Bar
Bar
-
-
-
-
Forgings - -
Forging Stock
Bar
-
-
-
-
Forgings - -
Forging Stock
Bar
-
-
-
-
Forgings - -
Forging Stock
Bar
-
-
-
-
Forgings - -
Forging Stock
Bar
-
-
-
-
Forgings - -
Forging Stock
Bar
-
-
-
-
Forgings - -
Forging Stock
Bar
-
-
-
-
Forgings - -
Forging Stock
Bar
-
2031
-
AMS 6440
AMS 6444
Forgings 2222
Forging Stock
Bar
-
3511
Forgings 2225
Forging Stock -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 25 of 46
TABLE 3B (cont) - NON-CORROSION RESISTING STEELS - BAR, FORGINGS & FORGING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN USA
S 137 WithdrawnHigh Cr-Ni freemachining steel
- Bar - -
S 138
S 139
S 140
S 142
Withdrawn
Withdrawn
Current
Current
3% Cr-Mo-V steel (vacuum remelted air hardening)
1½ Ni-Cr-Mo steel
2½ % Ni-Cr-Mo steel
1% Cr-Mo steel(4130)
4% Ni-Cr-Mo air hardening steel (vacuum arcremelted)
½ % Ni-Cr-Mo steel (manufacture offorged bolts &forged nuts)
Low Ni-Cr steel(manufacture of
forged bolts only)
1¾ % Ni-Cr-Mo steel (manufacture of
forged bolts &forged nuts)
-
-
FE-PL2105 (31NiCrMo10)
FE-PL1502 (25CrMo4)
FE-PL2109 (36NiCrMo16)
-
-
-
Bar - -
Forgings - -
Forging Stock
Bar
-
-
-
-
Forgings - -
Forging Stock
Bar
-
3517
-
-
Forgings 3518 -
Forging Stock
Bar
3520
2205
AMS 6370Forgings 2207
Forging Stock -
S 164
S 146
S 147
S 148
S 149
Current
Current
Current
Current
Current
Bar - -
Forgings - -
Forging Stock
Bar
-
2760
-
-
Forgings 2761 -
Forging Stock
Bar
-
-
-
-
Forging Stock
Bar
-
-
-
-
Forging Stock
Bar
-
-
-
-
Forging Stock - -
S 153 Current2½ % Ni-Cr-Mo steel
FE-PL2105 (31NiCrMo10)
Bar 2450 -
Forgings 2451 -
Forging Stock 3520 -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 26 of 46
TABLE 3B (cont) - NON-CORROSION RESISTING STEELS - BAR, FORGINGS & FORGING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN USA
S 154 Current2½ % Ni-Cr-Mo steel
FE-PL2105 (31NiCrMo10)
Bar 3519 -
Forgings 2455 -
Forging Stock 3520 -
S 155
S 156
S 157
Current
Current
Current
Ni-Si-Cr-Mo-V steel (vacuum arc remelted) (300M)
4% Ni-Cr-Mo casehardening steel
(vacuum arc remelted)
3% Ni-Cr-Mo case hardening steel
FE-PL2111 (43NiSiCrMoV7)
-
-
Bar 2762 AMS 6414AMS 6419AMS 6257
Forgings 2759
Forging Stock
Bar
-
- -
Forgings - -
Forging Stock
Bar
-
-
-
-
Forgings - -
Forging Stock - -
S 158 Current
1% Cr-Mo steel (manufacture of forged bolts & forged nuts)
-Bar - -
Forging Stock - -
S 162 Current
18% Ni-Co-Mo maraging steel (double vacuum melted)(Maraging 250G110)
FE-PM2701 (X1NiCoMoTiAl
18-5)
Bar 3528
AMS 6512Forgings 3529
Forging Stock 3530
DTD 5232 Withdrawn18% Ni-Co-Mo maraging steel -
Bar - -
Forgings - -
Forging Stock - -
S 163 Current Ni-Cr-Mo-V steel -
Bar - -
Forgings - -
Forging Stock - -
DTD 5222 Withdrawn5% Cr-Mo-V steel (vacuum remelted)
FE-PM1501 (40CrMoV20)
Bar 2269 -
Forgings 2271 -
Forging Stock - -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 27 of 46
TABLE 3C - NON-CORROSION RESISTING STEELS – TUBE
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
TYPEASD-STANprEN / EN
USA
T 2 Withdrawn4/1 Ni-Cr steel
- - - -
T 57 Withdrawn - - - -
T 45 Withdrawn C-Mn steel, weldable
- - - -
T 64 Withdrawn - - - -
T 53 Current
Cr-Mo steel, Weldable (4130)
FE-PL1502 (25CrMo4)
- 2247
AMS 6361AMS 6362
T 60 Current - -
T 76 Current - -
T 77 Current - 2211
T 78 Current 2%% Ni-Cr-Mo steel
- - - -
T 79 Current - - - -
DTD 167 Withdrawn Cr-Mo steel - - - -
DTD 503 Withdrawn C-Mn steel - Hydraulic - -
DTD 740 WithdrawnMo-B steel, weldable - - - -
DTD 5132 Withdrawn 1% Cr-Mo steel, weldable
- - - -
DTD 5142 Withdrawn - - - -
TABLE 3D - NON-CORROSION RESISTING STEELS - CASTINGS & REMELTING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN
USA
HC 1 Withdrawn Carbon steel --
PrecisionCastings - -
Sand Castings - -
CentrifugalCastings - -
RemeltingStock - -
HC 2 Withdrawn C-Mn steel -
PrecisionCastings - -
Sand Castings - -
CentrifugalCastings. - -
RemeltingStock - -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 28 of 46
TABLE 3D (cont) - NON-CORROSION RESISTING STEELS - CASTINGS & REMELTING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN
USA
HC 3
HC 4
HC 5
HC 6
HC 7
HC 8
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Current
Current
1% Cr-Molow alloy steel
3% Cr-Mo steel
3% Ni case hardening steel
3% Cr-Mo nitriding steel
3% Cr-Mo steel
3% Cr-Mo steel
-
-
.-
-
-
-
PrecisionCastings - -
Sand Castings - -
CentrifugalCastings - -
RemeltingStock
PrecisionCastings
-
-
-
-
Sand Castings - -
CentrifugalCastings - -
RemeltingStock
PrecisionCastings
-
-
-
-
Sand Castings - -
RemeltingStock
PrecisionCastings
-
-
-
-
Sand Castings - -
RemeltingStock
PrecisionCastings
-
-
-
-
Sand Castings - -
CentrifugalCastings - -
RemeltingStock
PrecisionCastings
-
-
-
-
Sand Castings - -
CentrifugalCastings. - -
RemeltingStock - -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 29 of 46
TABLE 3D (cont) - NON-CORROSION RESISTING STEELS - CASTINGS & REMELTING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN
USA
HC 9 Current Ni-Cr-Mo steel -
PrecisionCastings - -
Sand Castings - -
CentrifugalCastings - -
RemeltingStock - -
HC 10 Current Ni-Cr-Mo steel -
PrecisionCastings - -
Sand Castings - -
CentrifugalCastings - -
RemeltingStock - -
HC 401
HC 402
HC 403
Current
Withdrawn
Withdrawn
18% NiMaraging steel
Cast iron
High Cr cast iron
-
-
-
PrecisionCastings - -
RemeltingStock
CentrifugalCastings
CentrifugalCastings
-
-
-
-
-
-
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 30 of 46
TABLE 3E - NON-CORROSION RESISTING STEELS - ROD, WIRE & SPRINGS
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN
USA
S 201
S 202
S 203
S 204
DTD 720
DTD 5152
Current
Current
Current
Current
Withdrawn
Withdrawn
Cold drawn carbon steel
Cold drawn carbon steel
Carbon steel
Cr-V steel
'15' carbon steel
1% Cr-Mo steel
-
-
-
-
-
-
Wire & Springs (high duty ungroundwire)
Wire & Springs (high dutyground wire)
Wire & Springs (high dutyunground wire)
Wire & Springs (high dutyground wire)
Rod & Wire (suitable for blind rivets)
Wire (suitable for use as filler material)
-
-
-
-
-
-
-
-
-
-
-
-
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 31 of 46
TABLE 4A - CORROSION RESISTING STEELS – SHEET & STRIP
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN ALLOY
DESIGNATIONASD-STANprEN / EN USA
S 524 Current Cold rolled 18/10 Cr-Ni steel, Ti stabilized (30321) FE-PA3601
(X6CrNiTi18-10)
3816 -
S 526 Current 18/10 Cr-Ni steel, Ti stabilized(30321) 3488 AMS 5510
S 525 Current Cold rolled 18/10 Cr-Ni steel,Nb stabilized (30347) - - -
S 527 Current 18/10 Cr-Ni steel, Nb stabilized(30347) - - AMS 5512
S 528 Withdrawn 23/14 Cr-Ni steel, Ti stabilized - - -
S 529 Withdrawn 23/14 Cr-Ni steel, Nb stabilized - - -
S 530 Current 24/17 Cr-Ni steel, Ti stabilized - - -
S 531 Withdrawn 24/17 Cr-Ni steel, Nb stabilized - - -
S 532 Current Cr-Ni-Cu-Mo precipitation hardening steel (FV520S)
- - -
S 533 Current - - -
S 536 Current Low carbon 18/10 Cr-Ni steel(30304L)
FE-PA3901 (X2CrNi19-11)
2467 AMS 5511
S 537 Current Low carbon 17/12 Cr-Ni-Mo steel (30316L) - - AMS 5507
S 538 CurrentCr-Ni-Mo-V steel (Jethete M152, FV566)
FE-PM1502 (X11CrNiMoVN12-3)
2280 -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 32 of 46
TABLE 4B - CORROSION RESISTING STEELS - BAR, FORGINGS & FORGING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN USA
S 61 Withdrawn 12% Cr steel -
Bar - -
Forgings - -
Forging Stock - -
S 62 Withdrawn 12% Cr steel -
Bar - -
Forgings - -
Forging Stock - -
S 80 Current16% Cr-2.5%NiSteel (51431)
FE-PM3901 (X15CrNi17-3)
Bar 3490 AMS 5628MIL-S-18732 (Not for new
design)
Forgings 3491
Forging Stock -
S 124 Withdrawn12% Cr steel, free machining (51416)
-
Bar -
AMS 5610Forgings -
Forging Stock -
S 125 Withdrawn23/14 Cr-Ni steel, Ti stabilized
-
Bar - -
Forgings - -
Forging Stock - -
S 126 Withdrawn23/14 Cr-Ni steel, Nb stabilized
-
Bar - -
Forgings - -
Forging Stock - -
S 127 Withdrawn24/17 Cr-Ni steel Ti stabilized
-
Bar - -
Forgings - -
Forging Stock - -
S 128 Withdrawn24/17 Cr-Ni steel Nb stabilized
-
Bar - -
Forgings - -
Forging Stock - -
S 129 Current18/9 Cr-Ni steel Ti stabilized (30321)
FE-PA3601 (X6CrNiTi18-10)
Bar -
AMS 5645Forgings -
Forging Stock --
S 130 Current18/9 Cr-Ni steel Nb stabilized (30347)
-
Bar -
AMS 5646Forgings -
Forging Stock -
S 141 Withdrawn 12% Cr steel -
Bar - -
Forgings - -
Forging Stock - -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 33 of 46
TABLE 4B (cont) - CORROSION RESISTING STEELS - BAR, FORGINGS & FORGING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN USA
S 143 Current
Cr-Ni-Cu-Mo precipitation hardening steel(FV520B)
FE-PM1801 (X5CrNiMoCu
Nb14-5)
Bar - -
Forgings - -
Forging Stock - -
S 144 Current
Bar - -
Forgings - -
Forging Stock - -
S 145 Current
Bar - -
Forgings - -
Forging Stock - -
S 150 CurrentCr-Mo-V-NbSteel (FV448)
-
Bar - -
Forgings - -
Forging Stock - -
S 151 Current
Cr-Ni-Mo-V steel(JETHETE M152 Bar) (FV566 Forging Stock)
FE-PM1502 (X11CrNiMoVN
12-3)
Bar -
AMS 5719Forgings -
Forging Stock -
S 152
S 159
S 160
Current
Current
Current
Cr-Co-Mo-V-Nb steel (consumableelectrode remelted) (FV535)
12%Cr-Ni-Mo-V steel (suitable for themanufacture of fasteners) (FV566)
Cr-Ni steel (controlled nitrogen content)
FE-PM1708 (X9CrCoMo1)
-
-
Bar 4244 -
Forgings 2494 -
Forging Stock
Bar
4245
-
-
-
Forging Stock
Bar
-
- -
S 161 CurrentCr-Ni-Mo steel (controlled nitrogen content)
- Bar - -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 34 of 46
TABLE 4C – CORROSION RESISTING STEELS – TUBE
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREF ERR ED OT HERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN USA
T 66 Current 18/10 Cr-Ni steel, Nb stabilized (30347)
FE-PA3701
FE-PA3601 (X6CrNiTi18-10)
FE-PA3901 (X2CrNi19-11)
-
-
Weldable - AMS 5571
T 72 Current Hydraulic -AMS 5556Seamless
T 68
T 67
Current
Withdrawn
Cold drawn18/10 Cr-Ni steel, Nb stabilized
18/10 Cr-Ni steel, Ti stabilized (30321)
Structural
Weldable
-
3489
AMS 5897
AMS 5570
T 73 Current Hydraulic 3680AMS 5557Seamless
T 69
T 74
T 75
T 80
Withdrawn
Withdrawn
Withdrawn
Current
Cold drawn18/10 Cr-Ni steel, Ti stabilized (30321)
Low carbon18/10Cr-Ni steel(30304L)
Low carbon17/12Cr-Ni-Mo steel(30316L)
12% Cr steel
Structural
Weldable
Weldable
-
-
2468
-
-
AMS 5896
AMS 5647
AMS 5653
-
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 35 of 46
TABLE 4D – CORROSION RESISTING STEELS – CASTINGS & REMELTING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN
USA
HC 101 Current
Cr-Ni-Cu-Mo precipitation
hardening steel(FV520)
-
Precision Castings - -
Sand Castings - -
CentrifugalCastings - -
Remelting Stock - -
HC 102 Current -
Precision Castings - -
Sand Castings - -
CentrifugalCastings
- -
Remelting Stock - -
HC 103 Current
23% Cr-Ni-W Steel (H.R. CROWN
MAX30309)
-
Precision Castings - -
Sand Castings - -
CentrifugalCastings
-
Remelting Stock - -
HC 104
HC 105
HC 106
HC 404
Current
Current
Current
Withdrawn
19% Cr-10% Ni steel, Nb stabilized(30347)
18% Cr-11% Ni-2.5% Mo steel,
Nb stabilized
Cr-Ni-Cu precipitation
hardening steel
Cr-Mo cast iron
FE-CM3901 (X8CrNiNb19-11)
-
-
-
Precision Castings3363 -
Sand Castings
CentrifugalCastings
- -
Remelting Stock
Precision Castings
3366
-
-
-
Sand Castings - -
CentrifugalCastings
- -
Remelting Stock
Precision Castings
-
-
-
-
Sand Castings - -
CentrifugalCastings
- -
Remelting Stock
Sand Castings
-
-
-
-
CentrifugalCastings
- -
DTD 5289 Withdrawn Cr-Ni-3½ % Mo steel - Investment
Castings - -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 36 of 46
TABLE 4E – CORROSION RESISTING STEELS – ROD, WIRE & SPRINGS
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREF ERR ED OT HERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
PRODUCT FORM
ASD-STANprEN / EN
USA
S 205
S 206
DTD 161
DTD 189
DTD 271
DTD 5036
Current
Current
Withdrawn
Withdrawn
Withdrawn
Withdrawn
AusteniticCr-Ni steel
17/7 Cr-Ni precipitation hardening steel
12% Cr steel
Cr-Ni steel
12% Cr steel
Low carbon Cr-Ni steel, weldable
-
-
-
FE-PA3601 (X6CrNiTi18-10)
-
FE-PA3901 (X1CrNi18-10)
Wire & Springs
Rod, Wire & Springs
Rod & Wire (suitable for locking wire)
Wire, Rivets& Split Pins (suitable forlocking wire)
Strip (suitable for magneto- breaker springs)
Wire, Rivets & Split Pins
2541
-
-
2573
-
24692470
-
-
-
-
-
-
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 37 of 46
TABLE 5A – HEAT RESISTING ALLOYS – SHEET, STRIP & PLATE
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ASD-STAN ALLOY DESIGNATION
COMMON NAMES
PRODUCT FORM
ASD-STANprEN / EN
USA
HR 201 CurrentNI-PH8701 (NiCr20TiAl)
Nimonic 80A Sheet, Strip & Plate 2191 -
HR 202 CurrentNI-PH1801 (NiCr20Co18Ti)
Nimonic 90 Sheet & Strip 2298 -
HR 203 CurrentNI-PH1201 (NiCr20Ti)
Nimonic 75Sheet & Strip 2302 -
Plate 2411 -
HR 204 CurrentNI-PH2301 (NiCr21Fe18Mo9)
Hastelloy X Sheet, Strip & Plate 2185 AMS 5536
HR 205 CurrentNI-PD9001 (NiCu31)
Monel 400 Sheet & Strip - AMS 4544
HR 206 CurrentNI-PH1303 (NiCr20Co13Mo4Ti3Al)
Nimonic 263Sheet & Strip 2203
AMS 5872Plate 2418
HR 207 Current - Nimonic PE16Sheet & Strip - -
Plate - -
HR 208 Current - Inconel 600Sheet & Strip -
AMS 5540Plate -
HR 209 Current - Nimonic PK33Sheet & Strip - -
Plate - -
HR 240 CurrentCO-PH4101 (CoCr2OW15Ni
HS25/L605 Sheet & Strip 4568 AMS 5537
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 38 of 46
TABLE 5B – HEAT RESISTING ALLOYS – BAR, FORGINGS & FORGING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ASD-STAN ALLOY DESIGNATION
COMMON NAMES
PRODUCT FORM
ASD-STANprEN / EN
USA
HR 1
HR 2
HR 3
HR 4
Current
Current
Current
Current
NI-PH8701 (NiCr20TiAl)
NI-PH1801 (NiCr20Co18Ti)
NI-PD1301 (NiCo20Cr15Mo5A15Ti)
NI-PH1701 (NiCr15Co14A15Ti4Mo4)
Nimonic 80A Rex 664
Nimonic 90Rex 670
Nimonic 105
Nimonic 115
Bar 2188 -
Forgings 2189 -
ForgingStock
Bar
-
2295
-
-
Forgings 2296 -
ForgingStock
Bar
-
2179
-
-
Forgings 2180 -
ForgingStock
Bar
-
4369
-
-
Forgings 2197 -
ForgingStock 4370 -
HR 5 CurrentNI-PH1201 (NiCr20Ti)
Nimonic 75Rex 724
Bar 2306 -
Forgings 2307 -
ForgingStock 2308 -
HR 6 CurrentNI-PH2301 (NiCr21Fe18Mo9)
Hastelloy X Inco HX
Bar 2184
AMS 5754Forgings 2183
ForgingStock . 3668
HR 10 CurrentNI-PH1303 (NiCo20Cr20Mo5Ti2Al)
Nimonic 263Rex 736
Bar 2199
AMS 5886Forgings 2200
ForgingStock 2201
HR 40 CurrentCO-PH4101 (CoCr2OW15Ni)
HS25 / L605
Bar 4567
AMS 5759Forgings 4566
ForgingStock 4246
HR 51 CurrentFE-PA2601 (X6NiCrTiMoV26-15)
A286Rex 559
Bar 4318
AMS 5731AMS 5732
Forgings 2172
ForgingStock -
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 39 of 46
TABLE 5B (cont) – HEAT RESISTING ALLOYS – BAR, FORGINGS & FORGING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSASD-STAN ALLOY
DESIGNATIONCOMMON NAMES
PRODUCT FORM
ASD-STANprEN / EN
USA
HR 52 CurrentFE-PA2602 (X4NiCrTiMoV26-15)
A286 (low Ti)
Bar 3510 -
Forgings 2174 -
ForgingStock 4314 -
HR 53 CurrentFE-PA2501 (X4NiCrMoTi43-13)
Nimonic 901Incoloy 901Rex 688
Bar 2178
AMS 5660Forgings 2177
ForgingStock -
HR 55 Current - Nimonic PE16
Bar - -
Forgings - -
ForgingStock - -
TABLE 5C – HEAT RESISTING ALLOYS – TUBE
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSASD-STAN ALLOY
DESIGNATIONCOMMON NAMES
ASD-STANprEN / EN
USA
HR 401
HR 402
HR 403
HR 404
Current
Current
Current
Current
NI-PH8701 (NiCr20TiAl)
NI-PH1801 (NiCr20Co18Ti)
NI-PH1201 (NiCr20Ti)
NI-PH1303 (NiCo20Cr20Mo5Ti2Al)
Nimonic 80A
Nimonic 90
Nimonic 75
Nimonic 263
-
2299
2294
2202
-
-
-
-
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 40 of 46
TABLE 5D – HEAT RESISTING ALLOYS – CASTINGS & REMELTING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR
SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSASD-STAN ALLOY
DESIGNATIONCOMMON NAMES PRODUCT FORM
ASD-STANprEN / EN USA
HC 202
HC 203
HC 204
HC 205
HC 206
HC 207
HC 208
HC 209
HC 210
HC 211
HC 301
Current
Current
Current
Current
Current
Current
Current
Current
Current
Current
Current
NI-CH6301 (NiCr2Onb7Mo6W)
NI-CD7301 (NiCr13Al6Mo5Nb)
NI-CD1701 (NiCo15Cr10Al6Ti5Mo3)
NI-CH1303 (NiCo20Cr20Mo5Ti2Al)
NI-CI-11303 (NiCo20Cr20Mo5Ti2Al)
NI-CD1401 (NiCo10W10Cr9A16Ta3)
-
-
-
NI-CH1305(NiCr16Co10Mo8Al4Ti4)
CO-CH1401 (CoCr22NiW)
PE10
Inconel 713Nimocast713C
Inconel 100
Nimonic 263C263
Nimonic 263C263
MAR M002
MAR M246
Nimocast713LC
NimocastPD21
Nimonic 1023C1023
HS31Stellite 31
Precision Castings 2198 -
Remelting Stock
Precision Castings
-
2192
-
AMS 5391Remelting Stock
Precision Castings
-
2233AMS 5397
Remelting Stock
Precision Castings
4368
2204 -
CentrifugalCastings - -
Remelting Stock
Precision Castings
4384
2204
-
-
Remelting Stock
Precision Castings
4384
4097
-
-
Remelting Stock
Precision Castings
4096
-
-
-
Remelting Stock
Precision Castings
-
-
-
-
Remelting Stock
Precision Castings
-
-
-
-
Remelting Stock
Precision Castings
-
4095
-
-
Remelting Stock
Precision Castings
4094
2161
-
AMS 5382Remelting Stock 2660
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 41 of 46
TABLE 5E – HEAT RESISTING ALLOYS – BAR / WIRE FOR SPRINGS & FASTENERS
SPECIFICATION & DESCRIPTIONSIMILAR
SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSASD-STAN ALLOY
DESIGNATIONCOMMON NAMES
PRODUCT FORM
ASD-STANprEN / EN
USA
HR 501
HR 502
HR 503
HR 504
HR 505
HR 506
HR 601
HR 650
DTD 5638
DTD 5639
Current
Current
Current
Current
Current
Current
Current
Current
Withdrawn
Withdrawn
NI-PH1801 (NiCr20Co18Ti)
NI-PH1801 (NiCr20Co18Ti)
NI-PH1801 (NiCr20Co18Ti)
NI-PH1201 (NiCr20Ti)
-
NI-PH1801(NiCr20Co18Ti)
NI-PH8701 (NiCr20TiAl)
FE-PA2601 (X6NiCrTiMoV26-15)
NI-PH2601 (NiCr19Fe19Nb5Mo3)
NI-PH1302 (NiCr20Co13Mo4Ti3Al)
Nimonic 90
Nimonic 90
Nimonic 90
Nimonic 75
Inconel X750
Nimonic 90
Nimonic 80A
A286
Inconel 718
Waspaloy
Wire forSprings
Wire forSprings
Wire forThread Inserts
Bar & wire for fasteners
Wire for thread inserts
Wire forLocking
Bar & Wire forFasteners
Bar & Wire forFasteners
Bar & Wire forFasteners
Bar & Wire forFasteners
-
2401
-
2402
-
-
-
-
2952
-
-
-
-
AMS 5698AMS 5699
-
-
AMS 5732
AMS 5662AMS 5663
AMS 5707
2961
3219
2959
2960
3220
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 42 of 46
TABLE 6A - TITANIUM ALLOYS - SHEET, STRIP & PLATE
SPECIFICATION & DESCRIPTIONSIMILAR
SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
COMMON NAMES
PRODUCT FORM
ASD-STANprEN / EN
USA
TA 1
TA 2
TA 6
DTD 5023
TA 10
Current
Current
Current
Withdrawn
Current
CP
-
-
-
Ti 6Al-4V
Ti 2.5Cu
Ti 4AI-4Mo-
2Sn-0.5Si
TI-P99001
TI-P99002
TI-P99003
-
TI-P64001
TI-P19001
TI-P63001
Timetal 35A
Timetal 50A
Timetal 75A
Ti metal 65A
Timetal 6-4
Timetal 230
Timetal 550
Sheet & Strip
Sheet & Strip
Sheet & Strip
Sheet & Strip
Sheet
3441 (HR)AMS 4940
AMS 4902
AMS 4901
AMS 4900
-
3497 (CR)
3442 (HR)
3498 (CR)
3443 (HR)
3499 (CR)
-
-
TA 56 Current Plate 3464 AMS 4911
TA 59
TA 21
Current
Current
Sheet & Strip
Sheet & Strip
3456
3859 (HR)
AMS 4911
-
3860 (CR) -
TA 52 Current Sheet & Strip
3870 (HR) -
3871 (CR) -
TA 58
TA 57
Current
Current
Plate
Plate
-
3459
-
-
CP = Commercially pureCR = Cold rolledHR = Hot rolled
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 43 of 46
TABLE 6B - TITANIUM ALLOYS - BAR, SECTION & WIRE FOR FASTENERS
SPECIFICATION & DESCRIPTIONSIMILAR
SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
COMMON NAMES
PRODUCT FORM
ASD-STANprEN / EN USA
DTD 5013
TA 3
DTD 5273
TA 7
TA 11
Withdrawn
Withdrawn
Withdrawn
Current
Current
Withdrawn
Withdrawn
Current
CP
-
-
-
Ti 6AI-4V
Ti 2.5Cu
Ti 11Sn-5Zr-
2.2AI-1Mo-0.2Si-
Ti 4Al-4Mo-
4Sn-0.5Si-0.1C
Ti 4AI-4Mo-
2Sn- 0.5Si
-
TI-P99002
-
TI-P99003
TI-P64001
TI-P19001
-
-
TI-P63001
Timetal 35A
Timetal 50A
Timetal 65A
Timetal 100A
Timetal 6-4
Timetal 230
Timetal 679
Timetal 551
Timetal 550
Bar - -
Section
Bar
-
3460
-
-
Section
Bar
Bar
-
-
3461
-
-
AMS 4921Section
Bar
-
3311AMS 4928
Section 3355
TA 28
TA 22
Wire forFasteners
Bar
3813
3462
AMS 4965AMS 6930
-
Section - -
TA 53
TA 25
TA 38
Bar 3463 -
Section
Bar
Bar
-
-
-
-
-
-
TA 40
TA 45
Current
Current
Bar
Bar
-
3466
-
-
Section - -
TA 46 CurrentBar 3466 -
Section - -
TA 49 CurrentBar 3466 -
Section - -
CP = Commercially pure
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 44 of 46
TABLE 6C - TITANIUM ALLOYS - TUBE & CASTINGS
SPECIFICATION & DESCRIPTIONSIMILAR
SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
COMMON NAMES
PRODUCT FORM
ASD-STANprEN / EN
USA
DTD 5073
DTD 5363
Withdrawn
Withdrawn
CP
Ti 6A1-4V
-
TI-C64001
Timetal 65A
Timetal 6-4
Tube
Castings
-
3352
AMS 4942
AMS 4985AMS 4991
TABLE 6D - TITANIUM ALLOYS - FORGINGS & FORGING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR
SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
COMMON NAMES
PRODUCT FORM
ASD-STANprEN / EN
USA
TA 4 Withdrawn
CP
Ti 6AI-4V .
Ti 2.5Cu
TI-P99002 Timetal 50AForgingStock 3451 -
TA 5 Withdrawn Forging 3452 -
DTD 5283 Withdrawn- Timetal 65A
ForgingStock - -
DTD 5293 Withdrawn Forgings - -
TA 8 WithdrawnTI-P99003
TI-P64001
TI-P19001
Timetal 100A
Timetal 6-4
Timetal 230
ForgingStock 3453 AMS 4921
TA 9
TA 12
Withdrawn
Withdrawn
Forgings
ForgingStock
3496
3310
AMS 4921
AMS 4928AMS 6930AMS 6931TA 13
TA 23
Withdrawn
Withdrawn
Forgings
ForgingStock
3312
3454 -
TA 24 Withdrawn Forgings 3495 -
TA 54 Withdrawn ForgingStock 3455 -
TA 55 Withdrawn Forgings 3494 -
TA 26 Withdrawn Ti 11Sn-5Zr-2.2AI-1Mo-0.2Si
- Timetal 679ForgingStock - -
TA 27 Withdrawn Forgings - -
CP = Commercially pure
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 45 of 46
TABLE 6D (cont) - TITANIUM ALLOYS - FORGINGS & FORGING STOCK
SPECIFICATION & DESCRIPTIONSIMILAR
SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUS ALLOYASD-STAN
ALLOY DESIGNATION
COMMON NAMES
PRODUCT FORM
ASD-STANprEN / EN
USA
TA 39 Current Ti 4AI-4Mo-
4Sn-0.5Si-0.1C
Ti 6AI-5Zr0.5Mo-0.25Si
Ti 4AI-4Mo-
2Sn-0.5Si
-
TI-P65001
TI-P63001
Timetal 551
Timetal 685
Timetal 550
ForgingStock
- -
TA 41 Current - -
TA 42
TA 43
Current
Withdrawn
Forgings
ForgingStock
-
3321
-
-
TA 44
TA 47
Withdrawn
Current
Forgings
ForgingStock
3322
3465
-
-TA 50 Current
TA 48 WithdrawnForgings 3351 -
TA 51 Withdrawn
ADS Technical Specification – TS96 Issue 5Date: May 2014
Page 46 of 46
TABLE 7 - COPPER ALLOYS
SPECIFICATION & DESCRIPTIONSIMILAR SPECIFICATIONS
PREFERRED OTHERS
BS / DTD STATUSISO ALLOY
DESIGNATIONCOMMON NAMES
PRODUCT FORM
ASD-STANprEN / EN USA
B 8
B 21
B 23
Withdrawn
Withdrawn
Current
Cu Sn10
-
Cu Al10 Ni5 Fe4
Phosphor bronze
White metal
Aluminium bronze C63200
Castings
Ingots
Rod
-
-
-
-
-
AMS 4640AMS 4880
Section -
Forgings -
ForgingStock -
B 24 Current Cu Sn8Phosphor bronze
Rod - -
Section - -
B 25 Current
Cu Ni3 Si -
Rod - -
Section - -
Forgings - -
ForgingStock - -
B 26 CurrentRod - -
Section - -
B 27 CurrentCu Zn14 Al1 Ni1
Si1 Tungum
Tube - hydraulic - -
DTD 253 Withdrawn Tube - -
DTD 319 Withdrawn Rod - -
B 28 Current
Cu Be1.9
Cu Al9.5 Ni5 Fe5
Cu
Beryllium copperBERYLCO 25C17200
Aluminium bronzeC95500
Copper
Strip & Foil - AMS 4530
B 29 Current Strip & Foil - -
B 30 Current Strip & Foil - AMS 4532
B 31 Current Strip & Foil - -
B 32 Current Rod & Section -
AMS 4533AMS 4650
B 33
HC 502
T 51
Current
Current
Withdrawn
Wire & Springs
Castings
Tube - high pressure
-
-
-
-
-
-