eco series
TRANSCRIPT
FULL SPEED WHEN YOU NEED ITAfter filling, the vessel gets pressurized first so the abrasive is‘on full speed’ the moment you start blasting. So there’s no time-, abrasive- or compressed air loss. Also excessive wear (i.e. of the decompression valve) is avoided. When fitted with ‘Independently controlled multiple abrasive outlets’ the ECO series are well suited for use in/as (semi) automatic systems.
“Need a lot of start/stop/start intervals (i.e. blasting pipe joints or spot repair)? Then Gritco’s ECO Blast Pots are your most ef cient choice. For one because of their
unique ‘pressure hold system.”
eco series
gritco high qualityblasting equipmentGRITCO.COM
POWERFUL BENEFITS Immediate start response for precise blasting and more production
No slow abrasive starting shot Reduced dust by wet/vapour blasting possibilities Air (and water) cleaning/blowing off also possible Easy adjustable pressure and abrasive amount settings No pressure drop because of large pipework
BETTERBLASTING VALUEAccurate metering valve for less use of abrasives and dust production Wide choice in tankage varying from 18, 40, 60, 100, 160, 200 to 300 liter Independently controlled, multiple abrasive outlet possibilities (Spare) parts can be easily removed for quick maintenance Can meet any blasting need because of extensive options
ENVIRONMENTALLYFRIENDLYLess compressed air consumption means less compressor energy and CO2
Reduced waste and environmental pollution (dust) because of precise abrasive metering Less energy needed to attain the required blasting pressure
QUALITYINCLUDESWear resistant metering valve handles all abrasives (also steel grits, fine aluminum oxide, etc.)
Separate main air valve makes for little wear and maintenance No risk of abrasives entering the ‘air section’ because of separate decompression valve Spray painted, galvanized and non-ferrous fittings Completely safe according to European Directive PED2014/68/EU
NO SLOW ABRASIVE STARTING SHOT
SI N C E 1
99
0+
G
R I T CO
Unlike conventional blast pots the ECO series vessel gets pressurized right after the machine is lled with abrasive. Because of this ‘stand- by mode’ the abrasive ow is on full speed the moment you activate the start/stop blasting handle. Only for re lling the vessel needs to be depressurized. This means: a. Improved (more precise) production results.b. No time, abrasive or compressed air is wasted.c. Excessive wear (e.g. of the decompression valve) is minimized.
PE
D
2 0 1 4 / 6 8 / EU
CERTIFIED
gritco high qualityblasting equipmentGRITCO.COM
GRITCO’S UNIQUE PRESSURE HOLD SYSTEM SAVES TIME, AIR AND MONEY
eco series
BLASTING ACCESSORIES
COMPRESSED AIR AFTERCOOLERS
MOBILE DUSTEXTRACTION UNITS
PERSONAL PROTECTION
ALSO YOUR BEST CHOICE FOR ADDITIONAL EQUIPMENT
1
2
3
4
5 6
As the decompression valve is separated from the air section of the blast pot, no dust or abrasives can penetrate the air fittings.This eliminates the chance on malfunctions and makes for a long lifetime of the blast pot. The extra wear disc adds to this feature.
System pressure drops - also when using large nozzles- are prevented by large pipe works. This means no energy loss.
MEETING YOUR EXACT BLASTING NEEDS BY IMPLEMENTING ONE OR MORE OF THE MANY GRITCO OPTIONS. FOR EXAMPLE:
Spare parts are easily removed for quick and trouble free maintenance.
Reduced use of abrasives and dust production because of the accurate setting possibilities of the metering valve.
The (optional) regulator valve makes adjusting the right blasting pressure possible. This is important not only for getting the required blasting results (cleanness, roughness, speed) but also for the recycling (and lifetime) of re-usable abrasives.
Enhanced, trouble free blasting is obtained by the (optional) inlet filter. This filter removes final moist and residues from the compressed air.
WHAT MORE MAKES GRITCO ECO SERIES YOUR PERFECT BLASTING CHOICE
1 2
3
4
5
6