Edging Tape looks similar to that of edge banding roll. These tapes hold the rubber tightly in its place so that it doesn’t loosen up a bit. In turn it protects the edge of the blade and makes the racket looks good. These tapes only cover the sponge not the top sheets. The tapes are made up of superior quality of materials. They are two millimeters long.

On the other hand in order to cover the exposed sides of particular furniture Edge Banding method is followed which provides a covering plus sealing to the exposed sides of a furniture. Edge banding materials are often made up of wide variety of things including that of PVC, ABS, acrylic, Melamine, wood and that of wood veneer as a whole. Among all these materials ABS is the most suitable of all as it environmental friendly and thermally resilient by nature. These materials have certain advantageous features as they are easy to install, scratch resistant, durable, thermal resistance, and almost perfect for interior application. Individual by using this material often seal, cover and give a superior appearance to a particular products. As said earlier before availing these products certain things must be kept in mind one should ask for sample of these products before buying. Alongside this they should choose the color of these products, as color differs rapidly from one products to that of another.

The color of these products varies according to the design of particular furniture. These products if an individual are installing by himself then he must follow certain guidelines. One should cut the banding of a product longer than that of the panel. Before starting the mechanisms of banding one should keep the surface clean so that the materials are glued to the surface firmly. One by heating the material up makes sure that it has already stuck to the surface. One can apply clothing iron to heat up the material. Other than this if an individual is applying edge banding on two joining side one should start banding both left and right so that it cover up both the front and back side of a furniture. One can take aid of an expert for

this procedure. Edge banding products has wide range of application it is most often used in an office, kitchen, bathroom, bedroom furniture, to that of cubicle furniture as a whole.

Apart from this Extrusion Profile are made up of both hard and soft PVC based products and often comes in multi color to that of bi color. These materials are generally used at the corner of furniture, door, and that of window as a whole. They are mostly bi color or multicolor by nature.

Reference form: http://goo.gl/Dev0r0