edpc2013 program v01 - domel · buehler mechatronic award coffee break best paper award closing...

ElectricDrivesProduction

3 International Conferencerd

October 29 – 30 , 2013th th

Nuremberg, Germany

Copyright: ATS Wickel- und Montagetechnik AG

Program

The is located in the oyer.registration desk conference f

Opening time:

Monday, October 28 , 2013: 10:00 AM - 7:00 PMth

Tuesday Octo 29 3 8 AM 7 PM, ber , 201 : :00 - :00th

Wednesday October 30 3 AM 7 PM, , 201 : 8:00 - :00th

Phone: +49 911 5( ) 302 9090

Conference bags can be picked up at the registrationdesk. for the conference, theOn-spot registrationstechnical tours, the evening event and the conference WiFiwill be possible. can be settled in cashOn-site payments(EUR) only.

The on-spot and welcome drink willspeakers receptiontake place on , in theTuesday Octobe 29 3 PMr , 201 6:00

th

e fxhibition oyer.

All papers accepted and registered will be included inconference proceedings publishedand also atieeexplore.org scopus.com.and

CONTENT

OVERVIEW.............................................................. 2

SPONSORS.............................................................. 3

COMMITTEE........................................................... 4

T SIME CHEDULE.................................................. 5

TECHNICAL TOURS............................................ 10

TUTORIALS............................................................ 11

EXHIBITION........................................................... 12

PARTNERS.............................................................. 14

APPROACH............................................................ 15

PUBLICATION

ON-SITE ORGANIZATION

Increasing power consumption, CO reduction, growing2

mobility or progressing automation – all of these futuremegatrends are not possible without powerful electricdrives. The electrification of the automobile powertrainsystem is considered crucial, as the whole sector is facingdifficulties resulting from the substitution of the completeconventional powertrain. At the same time performanceimprovements and productivity gains can be reached also inindustry with new materials, efficient manufacturingprocesses and integrated production systems.

The international Electric Drives Production Conference andExhibition offers an outstanding platform for the exchangeof experiences for researchers, product developers,production experts, purchasers and potential users.

The offers on two days more than 80 technical papersE|DPCin total of eight tracks: four of them concentrate on the coretopics of electric drives production technologies, materialsand systems. The focus of the globally accompanyingconference on Energy Transfer in Electric Vehicles ( ) isE|TEVset on the technology of wireless power transmission. For thefirst time the Energy Storage Production Conference ( )E|SPCopens up new ideas and synergies at the same occasion. Andlast but not least the conference is hosting the wellestablished VDMA (German Association of Machine ToolMaker) symposium .e-motive

Completing the conference, a comprehensive industrialexhibition, tutorials, poster presentations, technicaltours social programand an inspiring will be offered.

ABOUT E|DPC

2

SPONSORS

Are you interested in supporting the E|DPC 2013 and presenting your company or organization as a sponsor? The E|DPC 2013 isthe ideal platform for the individual advertising of your innovative products and services. For further information, please visit ourwebsite www.edpc.eu/sponsoring-partners.

The Organizing Committee sincerely thanks the following and companies for sponsoring theorganizations E|DPC 2013:

Siemens AG

www.siemens.com/drives

Conference Sponsor

Copper Sponsors

MagCam NV

www.magcam.com

Aluminium Sponsors:

ATS

www.atsautomation.com

IEEE

www.ieee.org

Gold Sponsors Technical Co-Sponsor

3

Marsilli & Co. S.p.A.

www.marsilli.it

Continental AG

www.continental-corporation.com

INTERNATIONALPROGRAM COMMITTEE

Prof. Abele E.,TU Darmstadt (D)

Prof. Arai T.,University of Tokyo (J)

Baumueller A.,Baumueller GmbH (D)

Dr. Brandes J.,Siemens AG (D)

Prof. Covic G.,University of Auckland (NZ)

Prof. Dietz A.,University of Applied SciencesNuremberg (D)

Prof. Ehmann B.,University of Queensland (AUS)

Dr. Endisch C.,Audi AG (D)

Prof. Fleischer J.,Karlsruhe Institute of Technology (D)

Prof. Frey L.,Fraunhofer IISB (D)

Fritsch W.,ABM GreiffenbergerAntriebstechnik GmbH (D)

Prof. Gerling D.,University of the Federal Armed ForcesMunich (D)

Dr. Gerstenberger J.,Robert Bosch GmbH (D)

Prof. Hackstein D.,University of Hagen (D)

Hagemann B.,Power Transmission ResearchAssociation - FVA (D)

Prof. Hameyer K.,RWTH Aachen (D)

Prof. Hu J.,University of Michigan (USA)

Prof. Kampker A.,RWTH Aachen (D)

Prof. Kolar J.,ETH Zuerich (CH)

Prof. Meins J.,TU Braunschweig (D)

Dr. Moebius F.,B P CMW eugeot itroen

lectrification (D)E GmbH

PD Dr. Moeckel A.,Technical University ofIlmenau (D)

Prof. Monkman G.,University of Applied SciencesRegensburg (D)

Muhr P.,Buehler Motor GmbH (D)

Prof. Muhs J.,Utah State University (USA)

Prof. Muetze A.,TU Graz (A)

Noguchi K.,Aichi Steel Corporation (J)

Prof. Parspour N.,University of Stuttgart (D)

Pollmeier S.,VDE Power Engineering Society (D)

Prof. Reinhart G.,Technische Universitaet Muenchen (D)

Dr. Sakki R.,ABB Ltd (FIN)

Prof. Shinohora R.,Kyoto University (J)

Prof. Schluecker E.,University of Erlangen-Nuremberg (D)

Prof. Schmidt M.,University of Erlangen-Nuremberg (D)

Prof. Steinhilper R.,University of Bayreuth (D)

Prof. Suh I.-S.,Korea Advanced Institute of Scienceand Technology (KOR)

Prof. Thoms V.,Dresden University of Technology (D)

Prof. Verl A.,University of Stuttgart (D)

Dr. Vitek O.,Brno University of Technology (CZ)

Dr. Waasner M.,Gebr. Waasner GmbH (D)

Dr. Werner R.,TU Chemnitz (D)

CONFERENCECHAIRMAN

Prof. Franke J.,University of Erlangen-Nuremberg (D)

PUBLICATIONCHAIRMAN

Prof. Hahn I.,U (D)niversity of Erlangen-Nuremberg

LOCAL ORGANIZINGCOMMITTEE

Prof. Becker S.,Un (D)iversity of Erlangen-Nuremberg

Prof. Drummer D.,U (D)niversity of Erlangen-Nuremberg

Prof. Feldmann K.,U (D)niversity of Erlangen-Nuremberg

Prof. Kremser A.,University of Applied SciencesNuremberg (D)

Kuehl A.,U (D)niversity of Erlangen-Nuremberg

Prof. Piepenbreier B.,U (D)niversity of Erlangen-Nuremberg

Prof. Willner K.,U (Dniversity of Erlangen-Nuremberg

INTERNATIONAL CONFERENCE COMMITTEE

4

Baeuerlein F.,Siemens AG

Dr. Boehm T.,Volkswagen AG

Dibbern P.,Jungheinrich AG

Goericke D.,FVV e.V.

Haas E.,Magna Powertrain AG

Hagemann B.,FVA e.V.

Herrmann M.,Adam Opel AG

Kessler F.,Bayerische Motoren Werke AG

Dr. Vahlensieck B.,ZF Friedrichshafen AG

Dr. Wiebelt A.,Behr GmbH & Co. KG

Dr. Leonhard R.,Bosch Engineering GmbH

Dr. Nizzola C.,Daimler AG

Dr. Schamel A.,Ford Motor Company

Dr. Stopp R.,Schaeffler Technologie AG & Co. KG

COMMITTEE

5

TIME SCHEDULE:

OVERVIEW

9:00 AM

7:00 PM

9:00 AM

9:25 AM

11:00 AM

11:30 AM Session 1 Session 2 Session E-MOTIVE i Session E|TEV I

Magnet Material Innovative Material for

Magnetic Sheet

Electromobility Design and Optimization

Approaches

1:00 PM

2:30 PM Session 3 Session 4 Session E-MOTIVE ii Session E|TEV II

Magnet Manufacturing

and Test

Magnetic Sheet Metal

Processing

New Electric Motor

Concepts

New Coil Designs

4:00 PM

4:45 PM Session 5 Session 6 Session E-MOTIVE iii Session E|TEV III

Magnet Assembly Testing and Recycling

Technologies

Drive Control Challenges for

Industrialization and

Market Introduction

7:30 PM

9:00 AM Session 7 Session 8 Session E|SPC A Session E|TEV IV

Winding Technology (I) Production Concepts Safety and Quality in

Battery Production

Dynamic Power Transfer

Applications (I)

10:30 AM

11:15 AM Session 9 Session 10 Session E|SPC B Session E|TEV V

Winding Technology (II) Machine Size Related

Production Processes

Electro- / Chemical

Storages Production and

Technologies

Dynamic Power Transfer

Applications (II)

12:45 PM

2:15 PM Session 11 Session 12 Session E|SPC C Session E|TEV VI

Manufacturing of Electric

Drives

Manufacturing Methods

and Innovative Designs

Alternative Energy

Storage Technologies

Broader Considerations

3:45 PM

4:15 PM

4:45 PM

4:55 PM

5:00 PM

Lunch Break & Postersession

Welcome Coffee

Innovation in Large-Scale Generator Manufacturing

Ex

hib

ition

Buehler Mechatronic Award

Coffee Break

Best Paper Award

Closing Words and Look-Out

Lunch Break & Postersession

Coffee Break

Coffee Break

Monday, October 28th, 2013

Speakers Reception

Tuesday, October 29th, 2013

Opening Session

Coffee Break

Wednesday, October 30th, 2013

Technical Tours:

Technical Tour A: Research on Automation

Technical Tour B: Electric Drives Production

Tutorials:

Tutorial 1: Winding Assembly

Tutorial 2: Magnet Test

Tutorial 3: Laser Technology

Tutorial 4: ProPower

Conference Dinner

6

TIME SCHEDULE

Tuesday, October 29 , 2013th

9:25 AM

9:30 AM

10:00 AM

10:30 AM

11:00 AM Coffee Break

Session 1 Session 2

Magnet Material Innovative Material for Magnetic Sheet

Session Chair: Prof. Werner R.,

Chemnitz University of Technology (D)

Session Chair: Prof. Willner K.,

University of Erlangen-Nuremberg (D)

11:30 AM Hysteresis-Model Oriented Test Procedure for

Soft-Magnetic Properties of Printed or Rolled Toroids

Iron Loss Modelling which Includes the Impact of Punching,

Applied to High-Efficiency Induction Machines

Lindner M., Chemnitz University of Technology (D) Dr. Vandenbossche L., ArcelorMittal, Gent (B)

Dr. McClelland M., Leroy Somer, Angoulême (F)

12:00 PM Improvement of the Magnetic Properties of

Injection Molded Polymer Bonded Magnets

Effects and Advantages of High-Strength Non Grain Oriented

Electrical Steel for Traction Drives

Kurth K., University of Erlangen-Nuremberg (D) Tietz M., ThyssenKrupp Steel Europe AG, Bochum (D)

12:30 PM Magnetic Properties of Soft Magnetic Powder Composites at

Higher Frequencies in Comparison with Electrical Steels

Development of a Contact and a Material Model

of Laminated Stacks

1:00 PM Lunch Break & Postersession

Session 3 Session 4

Magnet Manufacturing and Test Magnetic Sheet Metal Processing

Session Chair: Prof. Drummer D.,


Session Chair: Prof. Hackstein D.

University of Hagen (D)

2:30 PM Assessment of Lamination Stack Production

Dr. Vervaeke K., MagCam NV, Leuven (B)

3:00 PM Innovative Systems for Measuring and Characterisation of

Permanent Magnets and Magnetic Fields

Localized Investigation of Magnetic Bulk Property

Deterioration of Electrical Steel

Holzhey R., INNOVENT e.V, Jena (D) Siebert R., Fraunhofer IWS, Dresden (D)

3:30 PM Characterization of Magnetic Actuators by Measuring of

Magnetic Stray Fields with GMR-Sensors

Dr. Braun W., Kienle + Spiess GmbH, Sachsenheim (D)

4:00 PM Coffee Break

Session 5 Session 6

Magnet Assembly Testing and Recycling Technologies

Session Chair: Prof. Fleischer J.,

Karlsruhe Institute of Technology (D)

Session Chair: Prof. Hahn I.,

University Erlangen-Nuremberg (D)

4:45 PM Automated Magnet Assembly for Large PM

Synchronous Machines with Integrated Permanent Magnets

Wu C., Robert Bosch GmbH, Stuttgart (D)

5:15 PM Optimized Handling of Permanent Magnets

within the Mass Production of

Electric Traction Drives

Impact of Impregnation Materials and Processes

on the Partial Discharge Resistance of

Low Voltage Electrical Machines

Schilp H., BMW Group, Munich (D) Kuschnerus M., ELANTAS Beck GmbH, Hamburg (D)

5:45 PM Acquisition Methodology of New Technologies

for the Production of Electric Motors

Disassembly Strategies for Recovering

Valuable Magnet Material of Electric Drives

Wowrezko D., RWTH Aachen University (D) Klier T., University of Erlangen-Nuremberg (D)

7:30 PM Conference Dinner

Dedication by the VDMA/FVA: Dr. Grunau A., Member of the Board Industrial, Schaeffler AG and Member of the FVA-Board

Hofmann B., University of Erlangen-Nuremberg (D)

Luchscheider V., University of Erlangen-Nuremberg (D)Dr. Schoppa A., PMG Fuessen GmbH, Fuessen (D)

Testing Method for Permanent Magnet

Synchronous Machines for Hybrid Vehicles by

use of Least Squares and Evolutionary Algorithms

Opening the Conference: Prof. Franke J., University of Erlangen-Nuremberg (D)

Keynote on Inductive Power Transfer: Prof. Suh N., Massachusetts Institute of Technology (USA)

Perspectives on Drive Technologie: Franke R.-M., CEO Drive Technologies - Siemens AG (D)

Stoll J., Karlsruhe Institute of Technology (D)

Automated Magnetic Inspection of

Permanent Magnet Rotors

Brela M., Robert Bosch GmbH, Nuremberg (D)

Comparison of Lasercutting vs. Punching and

Several Established Stacking Alternatives

Specially for Thin Laminations


Session E-MOTIVE i Session E|TEV I

Electromobility Design and Optimization Approaches

Session Chair: Dr. Boehm T.,

Volkswagen AG, Wolfsburg (D)

Session Chair: Prof. Franke J.,

University of Erlangen-Nuremberg (S)

11:30 AM E-MOTIVE - Benefits by Joint Research

with Automotive Industry

Systematically Design and Optimisation of Inductive

Power Transmission Systems

Dr. Boehm T., Volkswagen AG, Wolfsburg (D) Rathge C., Institut fuer Automation und

Kommunikation e.V. (ifak), Magdeburg (D)

12:00 PM The Innovative Hybrid-Synchrone-Machine

in the New BMW i3

Modeling of a Three-Phase Inductive Power Transfer System

in Phasor Domain for Fast Simulation

Dr. Merwerth J., BMW Group, Munich (D) Arnold R., Karlsruhe Institute of Technology (D)

12:30 PM E-Antrieb.Net - Pre Competitive Research of

Leading Technologies for Electromobility

Wiegand M., Leopold Kostal GmbH & Co. KG, Dortmund (D)


Session E-MOTIVE ii Session E|TEV II

New Electric Motor Concepts New Coil Designs

Session Chair: Kessler F.,

BMW AG, Munich (D)

Session Chair: Prof. Frey L.,

Fraunhofer IISB (D)

2:30 PM Production Concepts for Electric Drives

Joffe C., Fraunhofer IISB, Erlangen (D)

3:00 PM Dy-Free NdFeB Permanent Magnet Motor Topologies for

Automotive Applications

Coil Design of Electric Vehicle Inductive Chargers with

Homogeneous Low Magnetic Flux Density

Dr. Zhang S.,

Brose Fahrzeugteile GmbH & Co. KG, Wuerzburg (D)

Dr. Turki F., Vahle GmbH & Co. KG, Kamen (D)

3:30 PM High-Performance and Highly Efficient Electric

Wheel Hub Drive in Automotive Design

Shimizu R., Saitama University (J)


Session E-MOTIVE iii Session E|TEV III

Drive Control Challenges for Industrialization and Market Introduction

Session Chair: Baeuerlein F.,

Siemens AG, Munich (D)

Session Chair: Prof. Shinohora R.,

Kyoto University (J)

4:45 PM High-Power Wireless Charging for

the EV Market

Dr. Malrait F., Schneider Toshiba Inverters, Pacy Sur Eure (F)

5:15 PM Analysis of Sensor Parameter Characteristics and

Digital Control on the Electric

Drive’s Performance

Inductive Charging for EV, an Enabler for

Electromobility? The challenges of wireless

power transfer from a Tier-One perspective

Dr. Brockerhoff P., Infineon Technologies, Neubiberg (D) Thevenet M., Continental Automotive GmbH, Regensburg (D)

5:45 PM Highly Dynamic, Highly Integrated Current Sensors

for Electromobility Applications

Flexible Automation for the Production of Contactless Power

Transfer Systems for Electric Vehicles

Dr. Slatter R., Sensitec GmbH, Lahnau (D) Risch F., University of Erlangen-Nuremberg (D)

7:30 PM Conference Dinner

Daga A., Momentum Dynamics Corporation,

Malvern, PA (USA)

A Novel Positioning Tolerant

Inductive Power Transfer SystemBaumeister J., ZF-Friedrichshafen AG, Schweinfurt (D)

Robustness Analysis of Different Position Observers for

Surface–Mount Permanent Magnet

Synchronous Motors vis–à–vis Rotor Saliency

Wireless Energy Transmission Construction Kit -

0,4kW to 10kW for Applications with Voltages

between 12V and 500VGerlach M., RWTH Aachen (D)

Dr. Freitag G., Siemens AG, Munich (D)

A New Hc Core Transmitter of a Contactless Power Transfer

System that is Compatible with Circular Core Receivers and

H-shaped Core Receivers

7

TIME SCHEDULE

Tuesday, October 29 , 2013th

8

TIME SCHEDULE

, , 201Wednesday October 30 3th

Session 7 Session 8

Winding Technology (I) Production Concepts

Session Chair: PD Dr. Moeckel A.,

Ilmenau University of Technology (D)

Session Chair: Prof. Abele E.,

Darmstadt Technical University (D)

9:00 AM Winding Processes - Current and Future Challenges and

Opportunities for Automation Equipment Suppliers

A Modular Framework for Evaluation of

Electrical Machine Production Costs

Lang T., ATS Wickel- und Montagetechnik AG, Wuerenlos (CH) Fyhr P., Lund University (S)

9:30 AM Material Based Process Model for Linear Noncircular

Coil Winding Processes with Large Wire Gauges

Energy-Efficient Mobility

as a Market Chance

Sell-Le Blanc F., Karlsruher Institute of Technology (D) Jank K., puls Marktforschung GmbH, Schwaig (D)

10:00 AM Return on Engineering in

Electric Engine Production

Hagedorn J., Aumann GmbH, Espelkamp (D)


Session 9 Session 10

Winding Technology (II) Machine Size Related Production Processes

Session Chair: Prof. Feldmann K.,


Session Chair: Prof. Kremser A.,

Technical University Nuremberg (D)

11:15 AM Guide Winding

Dr. Hedges M., Neotech Services MTP, Nuremberg (D)

11:45 AM On the Wire Edge

Spitzner R., Buehler Motor GmbH, Nuremberg (D)

12:15 PM Experiences of Manufacturing Equipment Producer

Working in "Co-Design" with Electric Drives Producer

Large Drives Innovations Need

New Mass Manufacturing Processes

Kiefer D., Marsilli & Co. S.p.A., Castelleone (I) Schwander R., SCO Consulting GmbH, Luzern (CH)


Session 11 Session 12

Manufacturing of Electric Drives Manufacturing Methods and Innovative Designs

Session Chair: Prof. Gerling D.,

University of the Federal Armed Forces Munich (D)

Session Chair: Prof. Piepenbreier B.,


2:15 PM

Jonat T., ELANTAS Beck GmbH, Hamburg (D) Prof. Ehmann B., Hedrich Group, Katzenfurt (D)

2:45 PM Production Techniques to Shield the Vital

Components of Electric Drives

New Conceptional Lightweight Design Approaches for

Integrated Manufcturing Processes

Schedding T.,

HUEBERS Verfahrenstechnik Maschinenbau GmbH, Bocholt (D)

Peter M., Karlsruher Institute of Technology (D)

3:15 PM Virtual Prototyping of Electric Drive Systems for

System-level Parameter Studies and Optimization

New Self-Excited Synchronous Machine with

Tooth Concentrated Winding

Dr. Goossens P., Maplesoft, Waterloo (CDN) Dr. Dajaku G., FEAAM GmbH, Neubiberg (D)


4:15 PM

4:45 PM

4:55 PM

5:00 PM

Innovation in Large-Scale Generator Manufacturing - Stiesdal H., CTO, Siemens AG, Brande (DK)

Taux F., Nittoku Engineering Co. Ltd., Saitama (J)

Aerosol-Jet-Printing of

Dielectric Elastomer Actuators

Flexible Mass Production Concept for

Segmented BLDC StatorsJaksic D., Unum Limited, Auckland (NZ)

Closing Words and Look-Out - Prof. Franke J., University of Erlangen-Nuremberg (D)

Best Paper Award - Prof. Feldmann K., University of Erlangen-Nuremberg (D)

Buehler Mechatronic Award - Muhr P., Buehler Motor GmbH, Nuremberg (D)

Direct winding of inside slotted stators -

Needle Winding Applications for Concentrated

and Distributed Windings Nee C., RWTH Aachen University (D)

Modern Low Emission Resins Used in

Efficient Production

Enhanced Competitiveness with Quality Composites

and Automated Systems

9

TIME SCHEDULE

, , 201Wednesday October 30 3th

Session E|SPC A Session E|TEV IV

Safety and Quality in Battery Production Dynamic Power Transfer Applications (I)

Session Chair: Prof. Dietz A.,

Technical University Nuremberg (D)

Session Chair: Prof. Meins J.,

TU Braunschweig (D)

9:00 AM Design of Safe Assembly Processes for Live Working in

Traction Battery Series Production

Inductive Power Supply for

Heavy Rail Vehicles

Ranzinger R., AUDI AG, Ingolstadt (D) Streit S., Institute of Vehicle Concepts - German Aerospace Center,

Stuttgart (D)

9:30 AM Innovative Training Methods in Respect of Production

Orientated Qualifications of High Voltage Energy Storage

Electric Mobility for Heavy Duty Vehicles -

Siemens eHighway Solution and Research Results

Fink S., Chemnitz University of Technology (D) Dr. Lehmann M., Siemens AG, Erlangen (D)

10:00 AM Method for Quality Parameter Identification and

Classification in Battery Cell Production

Practical EV Integration Cases for Static and

Dynamic Wireless Power Transfer


Session E|SPC B Session E|TEV V

Electro- / Chemical Storages Production and Technologies Dynamic Power Transfer Applications (II)

Session Chair: Prof. Schmidt M.,


Session Chair: Prof. Weigel R.,


11:15 AM

Kirchhoff M.,

Trumpf Laser- und Systemtechnik GmbH, Ditzingen (D)

Prof. Shinohara N., Kyoto University (J)

11:45 AM Chemical Energy Storage

Prof. Dr. Duschl-Graw G., Beuth Hochschule für Technik Berlin (D)

12:15 PM New Requirements for the Virtual Assembly Validation

Caused by the Electrification of Passenger Vehicles

Identification and Positioning System for

Inductive Charging Systems

Kunz K., Audi AG, Ingolstadt (D) Dr. Loewel T., Alcatel-Lucent Deutschland AG, Berlin (D)


Session E|SPC C Session E|TEV VI

Alternative Energy Storage Technologies Broader Considerations

Session Chair: Prof. Schluecker E.,


Session Chair: Kiefer S.,

Kiefer Media GmbH, Offenburg (D)

2:15 PM

N.N., Technische Universitaet Muenchen (D) Kurczveil T., Technical University Braunschweig (D)

2:45 PM Kinetic Energy Storage - Energy-Efficient and

Highly Dynamic for Decentralised Application

Development of Positioning Tolerant Inductive

Charging Systems for Electric Vehicles

Schaede H., Darmstadt Technical University (D) Prof. Dr. Parspour N., University of Stuttgart (D)

3:15 PM Automotive Ultracapacitor Energy Storage

for Electric Buses

Charging Infrastructure for Shared Use of

Electric Vehicles in an Urban Area

Laska B., Siemens AG, Nuremberg (D) Borrmann D., Fraunhofer IAO, Suttgart (D)


Westermeier M., Technische Universitaet Muenchen (D) Perik H., Flanders' Drive, Lommel (B)

Hydropneumatic Storage Technology for

Energy Recuperation in Passenger Cars

Development of a Simulation Environment to

Evaluate Novel Charging Infrastructures

Wireless Charging for Electric Vehicle

with Microwaves

Laser Applications in Battery Production -

From Cutting Foils to Welding the Case

Inductive Power Transmission for Electric Vehicles with a

Three-Phase Moving TransformerProf. Arlt W., University of Erlangen-Nuremberg (D)

Technical Tour A: 10:00 am - 1:00 pm EUR 100,-

Research on Automation,

Electronics and

Electric Motor Production

02:00 PM Institute 1:

Institute for Manufacturing Automation

and Production Systems (FAPS) –

Egerlandstraße 7-9, Erlangen

04:30 PM Institute 2:

Bavarian Technology Center for Electric Drives

(E|Drive-Center) - Fuerther Straße 246b, Nuremberg

Technical Tour B: 10:00 am - 06:00 pm EUR 100,-

Electric Drives Production 09:30 AM Plant tour 1:

Conti Temic microelectronic GmbH,

Sieboldstr.19, 90411 Nuremberg

12:30 AM Plant tour 2:

Siemens AG,

Frauenauracherstraße 80, 91056 Erlangen

Leading industrial companies and research institutes will offer to all participants the opportunity to visit their facilities.

T , , 201ECHNICAL TOURS: Monday October 28 3th

10

POSTERSESSION

, , 201Tuesday, October 29 , 2013 and Wednesday October 30 3th th

Robot Based Assembly of Stators

Aichele J., Robert Bosch GmbH, Schwieberdingen (D)

Structural Mechanic Finite Element Analysis of the

Bend and Torsion Behavior of High-Voltage Cables

Optimization of Analytical Iron Loss Approaches

for Electrical Machines

Boenig J., University of Erlangen-Nuremberg (D) Reinlein M., Technical University Nuremberg (D)

Electrical Drivetrain without Rare Earth Magnets and

Integrated Inverter with Inherent Redundancy

Potential for Standardization and Guidelines of

Product and Production Features of Electric Drives

Dr. Brockerhoff P., Infineon Technologies, Neubiberg (D) Sell-Le Blanc F., Karlsruher Institute of Technology (D)

Electric Motors in Wearable

Rehabilitation Devices

Reliable Packaging Technologies for Power Electronics:

Diffusion Soldering and Heavy Copper Wire Bonding

Dr. Budaker B., Fraunhofer IPA, Stuttgart (D) Syed Khaja A.H., University of Erlangen-Nuremberg (D)

Parallel Decomposition for Safety-Critical Systems

Denk M., University of Bayreuth (D)

Design and Commissioning of a Low-Voltage

25 kW PMSM Traction Drive

Coils from Anodized Aluminium,

the Alternative to Copper

Endert F., Ilmenau University of Technology (D) Dr. Zimmermann O.,

STEINERT Elektromagnetbau GmbH, Cologne (D)

Continuous Rotational Cutting of Lamination Sheets

for Electrical Machines

Hackert J., Vipem Hackert GmbH, Gruenbach (D)

Session Chair: Prof. Becker S., University of Erlangen-Nuremberg (D)

Proactive Quality Control System for Defect Reduction

in the Production of Electric Drives Kuehl A., University of Erlangen-Nuremberg (D)

Comparison of Counting Algorithms and Empiric

Lifetime Models to Analyze the Load-Profile of an

IGBT Power Module in a Hybrid CarUygur G., University of Erlangen-Nuremberg (D)

During the tutorials vendors of product andmaterials,process technologies, service providers researchandorganizations will provide the participants with a profound

and applied know-how about specific topic . Tutorialss willbe held in English or German. Find more information onour website www.edpc.eu/tutorials.

11

Tutorial 1: 10:00 AM - 5:00 PM; CCN Centre EUR 100,-

Winding Assembly

Marsilli & Co. S.p.A.

Tutorial 2: 10:00 AM - 5:00 PM; CCN Centre EUR 100,-

Magnet Test

MagCam NV

Matesy GmbH

Dr. Brockhaus Messtechnik

GmbH & Co. KG

Tutorial 3: 1:30 PM - 6:00 PM; E|DRIVE Center - Room IPT EUR 100,-

Laser Technology - The Right

Tool for Electromobility

TRUMPF Laser- und Systemtechnik

GmbH

Tutorial 4: 1:30 PM - 6:00 PM; CCN Centre EUR 100,-

Current Power Electronic

Modules for Drive Technologies

Siemens AG

Modern demands and extended solutions for power electronics enables highly

integrated electric drives with increased power density and improved energy efficiency.

This tutorial provides an overview on today’s challenges and BMBF funded Propower

project based on possibilities in power electronics packaging with emphasis on

integration and manufacturing technologies. Different levels of packaging for power

modules with respect to cost-efficiency and reliability will be presented and evaluated

for the future needs in electronic drives technology.

In this tutorial Marsilli is presenting manufacturing solutions and technologies for the

complete process chain of the BLDC stator production. Discussion about the design

needs of the product will be an important aspect to guarantee the feasibility of a cost

efficient production solution. The area of interest that will be touched are the following:

- Poles preparation methodologies

- Winding methodologies

- Pole assembly methodologies

- Pole connection methodologies

- Wire connection methodologies

- Practical examples of realized solution.

This tutorial introduces the participants to a variety of measurement technologies for

fast and accurate inspection of permanent magnets of rotors, soft magnetic and hard

magnetic materials in research, development, production and quality control of electric

drives. Through a live demonstration of the various measurement and analysis

capabilities of the systems the participants obtain an expanded understanding of

advanced inspection possibilities in different fields of applications.

This tutorial will give you an overview of the possibilities using laser technology for the

production of e-mobility parts. Within the first part of this tutorial we will present you

new design possibilities for lightweight design and complex parts using only sheet

metal and standard machines. In the second block you will learn about laser cutting

technology now and in the future, especially for cutting electrical sheets, electrode foils

and tubes. After an overview of bending applications for producing 3D-parts from 2D

metal sheets, we will present you welding application in the field of e-mobility,

including e.g. welding of copper, aluminium and mixed materials.

TUTORIALS

Monday, October 28 , 2013th

E|DPC 201 will be completed by a comprehensive3exhibition. Companies, research institutes and otherorganizations will be offered the opportunity topresent their products and services to all participants.A perfect fit of your target audience and detailedtechnical discussions are guaranteed.

The exhibition will be organized byMesago Messe Frankfurt GmbH. Conferencedelegates have free access to the exhibition. For anyfurther questions regarding E|DPC-Ex pleasehibitionvisit the website www.edpc-expo.com.

EXHIBITION


Copyright Nuernberg Convention Center

The Exhibition will take place at Hall 10.1.

12

Register for your free entry ticket to the exhibition at

www.edpc-expo.com/tickets with the following code:

130001933

E|DPC Entrances and Services Parking

The exhibition covers the entire process chain rightthrough to the production of electric drives and otherinductivities. It showcases all components andmaterials as well as production processes and systems.The event will appeal to engine manufacturers, lookingto strengthen their market position whether based oncost, quality or innovation, as well as to carm a n u f a c t u re r s a n d s u p p l i e r s , w h o w a n t tosystematically plan their entry into electromobility.

Producers of electric machines and electro-mechanicproducts receive comprehensive informationregarding the production of electric drives.

Find out more about the exhibition topics:� Electromagnetic Components and Products� Materials and Semi-Finished Goods for

Electromagnetic Products� Energy Transfer for Electric Vehicles (E|TEV)� Winding Technology and

Manufacturing Facilities� Test- / Measurement- / and

Diagnostic Systems� Software� Electric Drives Manufacturing Services (E DMS)|� Production of electric machines for specific

applications

CONTACT MESAGO

Franziska Hesse

Tel: +49 (711) 61 94 6 65

E-Mail: [email protected]

Web: www.edpc-expo.com

EXHIBITION


Secure your stand space from

EUR 1,730.00 plus VAT.

13

Exhibitor list (as of June 2013)� ABM Greiffenberger Antriebstechnik GmbH� ATS Wickel- u. Montagetechnik AG� Aumann GmbH� BROSE-SEW

ELEKTROMOBILITAETS GmbH & Co. KG� CD-adapco� CST - Computer Simulation Technology AG� ELANTAS Beck GmbH� EMB - Elektromaschinenbau GmbH� Forschungsvereinigung Antriebstechnik e.V. -

FVA im VDMA� Germanflux-NOHA GmbH� Hans Mayer Elektrotechnik GmbH� HEDRICH GmbH� Hottinger Baldwin Messtechnik GmbH� HUEBERS Verfahrenstechnik

Maschinenbau GmbH� Kraemer Energietechnik GmbH� M-Pulse GmbH & Co. KG� Magcam� Maplesoft Europe GmbH� Marsilli & Co. S.p.A� PMG Fuessen GmbH� RM Prueftechnik GmbH� Scheugenpflug AG� Schleich GmbH� SICK Vertriebs-GmbH� Siemens AG Industry Sector� Stahl GmbH� STEINERT Elektromagnetbau GmbH� Stiefelmayer-Lasertechnik GmbH & Co. KG� Thyssenkrupp System Engineering GmbH� TRIDELTA Weichferrite GmbH� Universitaet Erlangen, Lehrstuhl FAPS� Victrex Polymer Solutions� voestalpine Stahl GmbH� Waasner Elektrotechnische Fabrik GmbH� Wieland Werke AG� Zany Materials Technology Ltd.

PARTNERS

AMA - Fachverband fuer

Sensorik e.V.

www.ama-sensorik.de

antriebstechnik - Technical

Magazine for Engineering

www.antriebstechnik.de

Automation Valley Nordbayern

www.automation-valley.de

Bayern innovativ

www.bayern-innovativ.de

Bundesverband fuer eMobilitaet

www.bem-ev.de

Cluster Mechatronik &

Automation e.V.

www.cluster-ma.de

ECPE -

The Industrial Research Network

for Power Electronics in Europe

www.ecpe.org

Electrical Manufacturing Coil

Winding Association

www.emcw.org

ETG - The Power Engineering

Society of the VDE

www.vde.com/etg

FVA - German Power

Transmission Research

Association

www.fva-net.de

IHK Mittelfranken

www.ihk-nuernberg.de

Insitute for Factory Automation

and Production Systems

www.faps.de

MHI - German Society for

Assembly, Handling and

Industrial Robots

www.wgmhi.de

City of Nuremberg

www.nuernberg.de

Nuremberg Metropolitan Region

www.metropolregionnuernberg.de

PELS - IEEE Power Electronics

Society

www.ieee-pels.org

VDMA - German Engineering

Federation (Power Transmission

Engineering)

www.vdma.org/ant

The 3 International Electric Drives Production Conference is kindly supported by the following organizations:nd

14

Nuremberg

Munich

A9A3

A6

A73

APPROACH

| BY CAR

You may reach the E|DPC 201 via car from the Highway:3- A9: 52 FischbachTake exit -- A6: Take exit 59 - Langwasser- A73: Take exit 34 - Zollhaus- Your navigation system will find NuernbergMesse if you

enter„Karl-Schoenleben-Strasse“ as address or Messe-zentrum as a special destination.

City

U11U1

U2

Airport

Main Station

ExhibitionCenter

Lorenzkirche

| BY PUBLIC TRANSPORTATION

To 3reach the E|DPC 201 from Nuremberg Main Station- Take subway no. 1 or 11 in direction “Langwasser“- Take Messestop “ ”

To 3reach the E|DPC 201 from Nuremberg Airport:- Take subway no. 2 in direction „Roethenbach“- Take Main Stationstop “ ”- Take subway no. 1 or 11 in direction “Langwasser“- Take s esse”top “MPlease find more on theInformation the websitewww.vgn.de


15

Nuermberg Messe GmbH - NCC MitteMessezentrum, 90471 Nuremberg

Conference Coordinator: Alexander Kuehl

Tel: +49 (911) 5302 9090Fax: +49 (911) 5302 9070

E-Mail: [email protected]: www.edpc.eu

EXHIBITION

E|DPC 2013 will be completed by a comprehensive exhibition. Companies, research institutesand other organizations will be offered the opportunity to present their products and servicesto all participants. The exhibition is organized by the Mesago Messe Frankfurt GmbH. For anyfurther questions regarding x please contact Ms.the E hibition Franziska Hesse( )[email protected] or visit the website www.edpc-expo.com.

Copyright City of Nuremberg


By registering to E|DPC you agree to store, administrate anduse your personal data for the generation of your invoiceand for informing you continuously about the latest researchresults and technology transfer activities of the Institute forFactory Automation and Production Systems (FAPS) of theUniversity of Erlangen-Nuremberg. Your personal data willnot be forwarded to third parties or used for other purposesthan specified above.

With the registration you also agree that photographs ofyour person shall be taken during the congress E|DPC. TheUniversity of Erlangen-Nuremberg shall have the non-exclusive, transferable, worldwide right in perpetuity toexploit such photographs in any and all forms, including, butnot limited to reporting on the aforementioned congress.

Cancellations received in writing prior to August , 20131 3st

will be refunded less a €100 administration fee. AfterAugust , 201 the fee will be fully charged.31 3st

Conference Organizer:E|DPC office, c/o FAPS-TT GmbHFuerther Straße 246b, D-90429 Nuremberg

SPONSORSHIP

Are you interested in supporting the E|DPC 2013 and presenting your company or organizationas a sponsor? The E|DPC 2013 is the ideal platform for the individual advertising of yourinnovative products and services. For further information, please visit our websitewww.edpc.eu/sponsoring-partners

REGISTRATION

By fax: +49 (911) 5302 9070 Online: www.edpc.euBy email: [email protected]

For the fax registration please use the following registration form:

Salutation ___________________ Title __________________________

First Name _________________________________________________

Last Name _________________________________________________

Company Name ____________________________________________

Department _______________________________________________

Street/Unit number _________________________________________

Postal Code ____________ City ________________________________

Country ___________________________________________________

Phone ____________________________________________________

Fax ______________________ Mobile phone _____________________

E-Mail ____________________________________________________

VENUE

RELEASE FORM

VENUE

The E|DPC 201 will take place at the Nuernberg Convention Center (NCC)3 Centre and hall 10.1of NuernbergMesse 29 30 3on October - , 201 . For your accommodation several hotels areth th

booked all over the city. For prices and reservation, please use the reservation form on ourwebsite www.edpc.eu. Nuremberg boasts a unique mixture of tradition and modern times. Bothpeople born here and people who moved here appreciate its extraordinary quality of life. At thesame time, Nuremberg is a modern city with 500,000 inhabitants, and the centre of a prosperingEuropean metropolitan region with 2.5 million inhabitants. Its almost thousand years of historyare still obvious in its cityscape. Please find more information at www.nuernberg.de.

CONFERENCE FEE

I sncludes access to all E|DPC, E-MOTIVE, E|TEV and E|SPC essions, accessto the exhibition, participation at the conference dinner, coffee andlunch breaks, conference proceedings printed and electronic as well as( )entitlement to participate at the tutorials and technical tours.

o Standard Fee 980,- € plus VATo Reduced Fee* 580,- € plus VAT

I also register for

o Tutorial #_____ 100,- € plus VATo Technical Tour Package _____ 100,- € plus VATo Evening Event included

* Reduced fee for International Program Committee members,speakers, authors, exhibitors and university members.

edpc2013 program v01 - domel · buehler mechatronic award coffee break best paper award closing...

Documents