ee 443/cs 543 optical fiber communications dr. donald estreich€¦ · 10. the numerical aperature...
TRANSCRIPT
![Page 1: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/1.jpg)
http://www.wiretechworld.com/the-future-of-optical-fibres/
EE 443/CS 543 Optical Fiber Communications
Dr. Donald EstreichFall Semester
1
Lecture 5
Optical FibersII
![Page 2: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/2.jpg)
2
Highlights from Lecture 4 – I
1. Silica is silicon dioxide and exists in many forms or structures2. The index of refraction n of silica is weakly dependent upon
wavelength (common values range from n = 1.4 to 1.6)3. The equation governs wave travel along a transmission line with a
superposition of waves of the form where kis the wave number (2/) and is the radian frequency
4. Waves have a phase velocity vphase ( = /k) and the energy of the wave travels at the group velocity vgroup ( = d/dk)
5. Modes exist in transmission lines and in general each mode travels at a different group velocity
6. There are two primary categories of optical fibers: multi-mode fibers and single-mode fibers – the single-mode fiber uses a very small diameter core whereas the multi-mode fiber has a larger core diameter
( ) −exp ( )amplitudeA j kz t
![Page 3: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/3.jpg)
3
Highlights from Lecture 4 – II
7. Optical fibers can be either step index (constant index n) or graded index (core n is shaped)
8. The index of refraction of the core is always greater than the cladding index of refraction (n1 > n2)
9. Single-mode fiber is best for long-haul applications such as for WAN, data center and submarine cable links; multi-mode fiber is best for shorter distance applications such as LAN and MAN networks
10. The numerical aperature NA of a fiber is11. The acceptance angle ac is related to the NA by12. Linearly polarized modes exist in optical fibers for multi-mode fiber,
but not of single-mode fiber13. Four generations of fiber systems: (1st generation) 45 Mbps & 850 nm,
(2nd generation) 0.1 to 1.7 Gbps & 1310 nm, (3rd generation) 10 Gbps & 1550 nm, and (4th generation) 10 Tbps & DWDM 1450 to 1620 nm
221 2NA n n= −
sin( )acNA n =
![Page 4: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/4.jpg)
4
https://www.slideshare.net/tossus/waveguiding-in-optical-fibers
Linearly Polarized (LP) ModesReview – From Lecture 4:
![Page 5: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/5.jpg)
5
LP01 Mode Distribution LP11 Mode Distribution
https://www.newport.com/t/fiber-optic-basics
When light is launched into a fiber, modes are excited to varying degrees depending on
the conditions of the launch — input cone angle, spot size, axial centration, etc. The
distribution of energy among the modes evolves with distance as energy is exchanged
between them. Energy can be coupled from guided to radiation modes by
perturbations such as microbending and twisting of the fiber.
LP01 and LP11 Modes in the Core of an Optical Fiber
![Page 6: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/6.jpg)
6
The V-Number (or Normalized Frequency)
https://www.rp-photonics.com/v_number.html
The V-number is an often-used dimensionless parameter in the context of
MMF step-index fibers. V is given by these three expressions:
2 2
1 2 1
2 2 22
− = =
a a aV n n NA n
1
2
a
n
n
NA
Radius of fiber core within the claddingIndex of refraction of fiber coreIndex of refraction of claddingWavelength of optical signal in vacuumNumerical AperatureIndex difference between n1 and n2 is
− =
2 2
1 2
2
12
n n
n
See Section 2.4.1 in Senior, 3rd ed., Eqs. (2.69 and 2.70)
![Page 7: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/7.jpg)
7http://www.invocom.et.put.poznan.pl/~invocom/C/P1-9/swiatlowody_en/p1-1_1_3.htm
Propagation Constant vs. V-number for Different Modes
V = 2.405
Single moderange
LP01
LP11
LP21
0.00
1.00
( ) −
−
2 22
2 21 2
/ k nb
n n
From the solutions of Maxwell’s equations
No
rmal
ized
Pro
pag
atio
n C
on
stan
tb
See Section 2.4.1 in Senior, 3rd ed.
![Page 8: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/8.jpg)
8
The V-Number (or Normalized Frequency)
The V-number is a dimensionless parameter used in the context of step-index
fibers. It is defined as
where λ is the vacuum wavelength, a is the radius of the fiber core, and NA is the
numerical aperture. The V-number can be viewed as a kind of normalized optical frequency. (It is proportional to the optical frequency but rescaled using a waveguide’s properties.) Its useful properties for optical fibers are:
2 2
1 2
2 2
− =
a aV n n NA
(1) For V values less than 2.405, a fiber supports only one mode per polarization
direction (→ single-mode fibers).
(2) Multimode fibers can have much higher V numbers. For large values, the
number of supported modes of a step-index fiber (including polarization
multiplicity) can be calculated approximately as
2
; for 2.4052
V
M V
![Page 9: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/9.jpg)
9
Example: Number of Modes in a MMF given a V-Number Value
Consider a multimode fiber (MMF) with the following
parameters; core radius = ½ 50 m (radius a = 25 m),
numerical aperature NA = 0.39, and wavelength = 1500 nm.
Find the (1) value of the V-number and (2) estimate the number of modes M supported by this value.
2 2
2 2 (25 μm)(0.39) 40.8
1.500 μm
(40.8)832 modes
2 2
aV NA
VM
= = =
= =
![Page 10: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/10.jpg)
10
where Vlm corresponds to the (l,m)-mode. The cut-off wavelength may also be defined as the wavelength for which multimode transmission begins. Thus,
1 1 21 2
1
2 22 2
2
2 22 ,
2
−= = −
C
lm lm
an n n an n
V n V
Optical Fiber Cut-Off Wavelength
2(single-mode)
2.405
=
C
aNA
The cut-off frequency of an electromagnetic waveguide is the lowest frequency
for which a mode will propagate in it. In fiber optics, it is more common to
consider the cut-off wavelength, C , the maximum wavelength that will
propagate in an optical fiber or waveguide. The cut-off wavelength is given by
https://en.wikipedia.org/wiki/Cutoff_frequency
Section 2.5.1 to 3.12 in Senior, 3rd ed. (pp. 59 to 60 )
![Page 11: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/11.jpg)
11
Example 2.8: Optical Fiber Cut-Off Wavelength
Determine the cut-off wavelength for a step-index fiber to exhibit single-mode
operation when the core refractive index and core radius are n1 = 1.46 and a =
4.5 microns (m), respectively, with a relative index difference being 0.25%.
Solution: Using equation (2.98) on page 59 of Senior, 3rd edition, we find
12 2 2 (4.5 μm) 1.46 2 (0.00025)
2.405 2.405
1.214 μm or 1,214 nm
C
C
an
= =
=
![Page 12: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/12.jpg)
12
https://physics.stackexchange.com/questions/106477/graded-index-fiber?rq=1
Single Mode Optical Fiber Field Distribution
Step-Index SMF Fiber
![Page 13: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/13.jpg)
13
http://en.optipedia.info/lsource-index/fiberlaser-index/fiber/parameters/mode-field/
Mode Field Diameter (MFD) in Single-Mode Fiber
For SMF, the diameter of the circular region for the light intensity of 1/e2 = 0.1356 of
the core center light intensity is defined as mode field diameter (provided that the
light intensity distribution in SMF is approximated by the Gaussian function).
=MFD 2wThe MFD is sometimesassumed to be definedby the 1/e (= 0.368) amplitude points.
Senior, 3rd ed., pp. 60-61
![Page 14: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/14.jpg)
14
Mode-Field Diameter is Dependent Upon Wavelength
https://www.slideshare.net/tossus/waveguiding-in-optical-fibers
Wavelength (nm)
Mo
de-
Fiel
d D
iam
eter
(
m)
![Page 15: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/15.jpg)
15
Next Topic: Dispersion in Optical Fibers
Sections 3.8 to 3.12 in Senior, 3rd ed. (pages 105 to 140)Also refer to Section 3.13.2 (pages 144 to 147).
Initial shape
Later shape
![Page 16: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/16.jpg)
16
Pulse Spreading Caused by Dispersion
From: Senior, 3rd ed.– Figure 3.7 on page 106 in Chapter 3.
Composite pattern
1 0 1 1
Attenuation of pulsesnot included in figure
![Page 17: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/17.jpg)
17
A Demonstration of Wave Dispersion
https://en.wikipedia.org/wiki/Wave_packet
A wave packet with dispersionA wave packet without dispersion
▪ Single pulse▪ Pulse maintains its shape▪ Phase and group velocities equal
▪ Single pulse▪ Pulse spreads out as it travels▪ Phase and group velocities unequal
Lossless travel along a transmission path
Group velocity is the speed of the centroid of the pulse.It is the velocity of energy transport.
![Page 18: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/18.jpg)
18
And Pulses Trains Consist of Many Frequency Components
http://mriquestions.com/fourier-transform-ft.html
Periodic Waveforms use Fourier series to express the frequency components.
![Page 19: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/19.jpg)
19
Pulses Are the Sum of Many Frequencies
http://mriquestions.com/fourier-transform-ft.html
t
Infinite durationFourier TransformPair
![Page 20: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/20.jpg)
20
Parameter: Digital Bit Rate
For no overlapping light pulses in an optical fiber, thedigital bit rate (BT) must be less than the reciprocalof the pulse duration (2). Hence,
We must distinguish between digital bit rate and the band-width of the medium. The next slide addresses this.
1(approximately)
2TB
![Page 21: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/21.jpg)
21
Digital Bit Rate (BT) and Bandwidth (BW)
From: Figure 3.8 (page 107) in Senior, 3rd ed.
Nonreturn-to-Zero
Return-to-Zero
Maximum rateof change ina bit pattern
(b) 1 1 1 1
(a) 1 0 1 0
time
time
Finding the maximum digital bit rate BT (bps) from bandwidth BW (Hz) of transmission line depends upon the digital coding:
For Nonreturn-to-Zero: BT(max) = 2BWFor Return-to-Zero: BT(max) = BW
Two bits per second per Hz
One bit per second per Hz
NRZ
RZ
![Page 22: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/22.jpg)
22
Bandwidth-Length Product is a Useful Metric
The information carrying capability of an optical fiber is limited bythe amount of pulse distortion at the receiving end of the fiber.Pulse broadening is proportional to the length of the fiber cable and thus bandwidth is inversely proportional to distance.
The Bandwidth-Length parameter is a very useful parameter statingthe information capability of a transmission line (optical fiber).
A more accurate estimate for maximum bit rate BT(max) is obtained ifwe have a Gaussian pulse with standard deviation ,
TB L
0.2(max) [bits/sec]TB
=
See Appendix B (pp. 1052-1053)of Senior, 3rd ed.
~
![Page 23: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/23.jpg)
23
Example 3.5 (Page 109) of Senior, 3rd Edition
A multi-mode graded index fiber exhibits a pulse broadening of 0.1 microseconds (0.1 s) over a length of 15 km.
(a) Estimate the maximum possible bandwidth of this fiber link assuming not ISI.
The maximum possible optical bandwidth which is equivalent to the maximumPossible bit rate (for to return-to-zero pulses) without ISI is
(b) The dispersion per unit length may be estimated by dividing the total dispersion by the total length of the fiber link.
−= = = =
6second)
1 15 MHz
2 2 (0.1 10opt TB B
6second0.1 10
Dispersion 6.667 ns/km15 km
−= =
![Page 24: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/24.jpg)
24
Example 3.5 (continued)
(c) The bandwidth-length product can be determined in two ways. First, multiply the maximum bandwidth by its length.
Second, use the dispersion per unit length and use BT = 1/2.
5 MHz 15 km 75 MHz kmoptB L = =
9
1 175 MHz km
2 2 6.667 10 [sec/km]optB L
−= = =
![Page 25: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/25.jpg)
25
https://fiberopticnetwork.wordpress.com/tag/fibre-optic-bandwidth/
Fiber
Size (m) Wavelength 850 nm 1300 nm 1550 nm
9/125 Single-mode 2000 20,000 + 4000 – 20,000 +
50/125 Multimode 200 - 500 400 - 1500 300 - 1500
62.5/125 Multimode 100 - 400 200 - 1000 150 - 500
Bandwidth Distance Product (MHz km)
Bandwidth-Distance Product (MHz-km)Fiber
Some commonly cited numbers:
![Page 26: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/26.jpg)
26
https://www.intechopen.com/books/current-developments-in-optical-fiber-technology/multimode-graded-index-optical-fibers-for-next-generation-broadband-access
Dispersion Mechanisms in Optical Fibers
MMF = Multi-Mode Fiber; SMF = Single Mode Fiber
Optical Fiber Dispersion
Profile dispersion(MMFs)
![Page 27: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/27.jpg)
27
Dispersion Mechanisms in Optical Fibers – I
Modal Dispersion is a distortion mechanism occurring in multimode fibers, where
signals spread in time because the propagation velocity of the signals are not the
same for different modes.
Modal Dispersion (also called Intermodal Dispersion)
Chromatic Dispersion is the result of the different colors, or wavelengths, in a light
beam arriving at their destination at slightly different times. It results from the
refractive index being a function of wavelength.
Chromatic Dispersion
Waveguide Dispersion is the result of wavelength-dependence of the propagation
constant of the optical waveguide. It is important in single-mode waveguides. The
larger the wavelength, the more the fundamental mode will spread from the core into
the cladding. Related to Goos-Häenchen shift.
Waveguide Dispersion
![Page 28: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/28.jpg)
28
Dispersion Mechanisms in Optical Fibers – II
Polarization Mode Dispersion
Polarization Mode Dispersion (PMD) is a form of modal dispersion where two
different polarizations of light, which normally travel at the same speed, now travel
at different speeds due to their different polarizations.
Material Dispersion
Material Dispersion is one kind of Chromatic Dispersion where the material
refractive index varies with wavelength and therefore causes the group
velocity to vary. It is called “material” dispersion to distinguish it from “waveguide”
dispersion, which is a consequence of how light is guided in a dielectric fiber.
![Page 29: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/29.jpg)
29
Review: Group Velocity
A packet of waves (signal) moves at the group velocity given by
where
The group velocity is the velocity of the energy transport of theoptical signal propagating on the fiber.
The phase velocity of a single frequency is
= = = =1
g gr
d cv v
d dd
d dk
p phv v
= =
= = =1 1 1
2n n k n
c
Ref. Section 2.3.3,pp. 28 to 30 in Senior, 3rd ed.
![Page 30: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/30.jpg)
30
Review: Group Delay
❑ Group delay gr is the time taken by a modulated signal to travel (such as a length L of optical fiber).
❑ The collection of all frequencies constitutes the signal’s waveform and the energy of the signal.
❑ Each spectral component travels independently of the others.❑ Group velocity vgr is the speed of the waveform (i.e., group of
frequencies) as it travels through a component.
Ref. Section 2.3.3,pp. 28 to 30 in Senior, 3rd ed.
1gr
grv =
![Page 31: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/31.jpg)
31
A Formula for Group Velocity
−
−
− = = =
− = −
= =
−
1
1
1
1 1
2
11
2( )
( ) ( )1
2
gr
gr
d d d dv n
d d d d
dn n
d
c c
dn Nn
d
where Ngr is known as the “group index of the fiber.”For comparison,
Ref. Section 2.3.3,pp. 28 to 30 in Senior, 3rd ed.
=1
phase
cv
n
![Page 32: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/32.jpg)
32
Example: Wave Packet Formed By Two Sinusoids
http://hyperphysics.phy-astr.gsu.edu/hbase/Sound/beat.html
The formation of a wave packet from combining two sinusoidsof nearly equal frequencies.
The envelope of the wave packet moves at the group velocity.
=gr
dv
d
envelope
![Page 33: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/33.jpg)
33
Wave Packet Formed By Many Sinusoids
https://www.slideshare.net/srkrishna341/isi-and-nyquist-criterion
FrequencyDomain
Time Domain
![Page 34: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/34.jpg)
34
Pulse Dispersion Illustrated
http://umich.edu/~elements/5e/18chap/summary.html
Time evolution: t5 > t4 > t3 > t2 > t1
Why does dispersion occur?
Because the Fourier spectral components travel at different velocities causing the pulse to spatially spread out.
![Page 35: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/35.jpg)
35
Derivation of Phase and Group Velocity
Neglecting attenuation, the electric field of a single frequency sinusoid traveling in the z-direction is
The phase front is the plane where the optical phase is constant.
Differentiating both sides gives the phase velocity,
Next, modulate the signal by a sinusoid of frequency .
The modulation splits the signal into two frequency components.
( )( )
= − − = = =0
2( , ) exp ( , whereE z t E j t z n nk n
c
= =phase
dzv
dt
− = constantt z
( )( ) ( ) = − − 0( , ) exp ( cosE z t E j t z
![Page 36: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/36.jpg)
36
Derivation of Phase and Group Velocity (continued)
At the input (z = 0), we have
because
Now we have two frequencies, + and - , so this givestwo propagation constants: + and - , where = n/c.Thus,
( ) ( ) ( ) − − + − −= = +00
( ) ( )(0, ) cos2
j t j t j tEE t E e e e
( ) ( ) − = +( ) ( )1cos .
2
j je e
( ) ( )( )( )( ) ( )
( ) ( )
+ − + − − −
−
− −
−
= +
= −
=
( ) ( ) ( ) ( )0
0
0
( , )2
( , ) cos
( , ) optical carrier envelope of carrier
t z t z
t z
j j
j
EE z t e e
E z t E e t z
E z t E
![Page 37: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/37.jpg)
37
Derivation of Phase and Group Velocity (continued)
The envelope of the carrier represents the information that is modulated onto the optical carrier signal. The propagation speed is called the group velocity and is found by differentiating
This gives the relationship for group velocity,
Letting → d and → d ,
When the index of refraction is constant with frequency and geometry, then
− = constantt z
= =
group
dzv
dt
=group
dv
d
=group phasev v
![Page 38: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/38.jpg)
38
Group Velocity Dispersion
Consider two sinusoids of frequencies of (+½) and
(-½) modulated onto carrier frequency .
Each modulating frequency has its own group velocity.
2
Optical carrier
Frequency
- - - + + - + +
From: Rongqing Hui, Introduction to Fiber-Optic Communications, Academic Press, London, 2020; pp. 48 to 51. © Elsevier.
![Page 39: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/39.jpg)
39
Group Velocity Dispersion (continued)
The propagation group delay group over a one-meter length is defined as the reciprocal of the group velocity.
The group delay difference between + ½ and - ½ is
Obviously, the group delay difference is introduced by the frequency dependence of the propagation constant ().
1 1group
group
d
dv d
d
= = =
2
2
group
group
d d d d
d d d d
= = =
From: Rongqing Hui, Introduction to Fiber-Optic Communications, Academic Press, London, 2020; pp. 48 to 51. © Elsevier.
![Page 40: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/40.jpg)
40
Group Velocity Dispersion (continued)
In general, a frequency dependent propagation constant () can be written as a Taylor’s series,
where
0 0
0 0 0 02
0 0 1 0 2 0
22
2
1( ) ( ) ( ) ( )
2
1( ) ( ) ( ) ( )
2
d d
d d
= =
= + − + − +
= + − + − +
From: Rongqing Hui, Introduction to Fiber-Optic Communications, Academic Press, London, 2020; pp. 48 to 51. © Elsevier.
1
2
2
2
is the group delay
is the group delay dispersion
d
d
d
d
=
=
![Page 41: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/41.jpg)
41
Dispersion Coefficient
The relative time delay between two frequency components in an optical fiber of length L is
It is more convenient to use the wavelength separation instead of the frequency separation, then the relative delay is
where D is the group delay dispersion coefficient. It is related to the parameter 2 as follows:
From: Rongqing Hui, Introduction to Fiber-Optic Communications, Academic Press, London, 2020; pp. 48 to 51. © Elsevier.
2group groupL L = =
group
group
dD
d
= =
22
2group groupd dd cD
d d d
= = =
![Page 42: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/42.jpg)
42
Dispersion Coefficient
The relative time delay between two wavelength components separated by is
In practical fiber systems the delay is measured in picoseconds (ps), wavelengths in nanometers (nm) and fiber distances in kilometers (km). The units for the dispersion coefficient D is [ps/nm-km].
When more than one dispersion mechanisms are present in the fiber the dispersion coefficients are added together.
From: Rongqing Hui, Introduction to Fiber-Optic Communications, Academic Press, London, 2020; pp. 48 to 51. © Elsevier.
group D L =
iitotalD D=
Examples: Modal, chromatic, material, waveguide and polarization dispersion.
![Page 43: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/43.jpg)
43
https://apps.lumerical.com/pic_circuits_optical_fiber.html
Modal Dispersion
Modes in fiber
Each mode has a uniquevelocity of propagation
Pulseshape
Dispersion by path length
Sum of the threecomponents
![Page 44: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/44.jpg)
44
Modal Dispersion
1min
1
distance
velocity ( / )
LnLT
c n c= = =
1max
distance
velocity cos( )
LnT
c = =
Ref. Section 3.10.1,pp. 114 to 119 in
Senior, 3rd ed.
1
2
max
2
LnT
c n=
The minimum time Tmin for a signal to travel distance L within the fiber is
The maximum time Tmax for a signal to travel distance L within the fiber is
Using Snell’s Law we can write
![Page 45: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/45.jpg)
45
Modal Dispersion (continued)
The time delay difference between meridional ray and the axial ray by subtraction,
and by definition delta is
And
What we want to know is the rms pulse broadening MD
1 1 11 1 2max min
2 2 2 2
2 2 2Ln Ln LnLn n nT T T
c n c c n n c n
−= − = − = =
− − =
2 2
1 2 1 2
2
1 1
, 12
n n n n
n n
2
1 1 2 1
2 1
( )or
2
Ln n n Ln L NAT T
c n c n c
−= = =
( )2
1
12 3 4 3MD s
L NALn
c n c
= = =
~
~
~That was a homework problem
![Page 46: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/46.jpg)
46From: Figure 3.9 (page 108) in Senior, 3rd ed.
Pulse Broadening From Intermodal Dispersion
20 MHz-km
1 GHz-km
100 GHz-km
Multimode step index fiber
Multimode graded index fiber
Single-mode step index fiber
Bandwidth Distance Product
![Page 47: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/47.jpg)
47
Example 3.8 (Modal Dispersion)
Senior, 3rd ed.Pages 117-118
Example 3.8. A six-kilometer (6 km) optical link with multi-mode step-index fiber withcore index of refraction = 1.500 and relative refractive index difference of 1%. Find (a) The delay difference between the lowest and fastest modes of the fiber link.
Solution: The delay difference is given by
(b) Find the rms pulse broadening from modal dispersion over the fiber link of 6 km.
Solution:
(c) Next, find the maximum bit rate without errors on the fiber link.
3
1
8
(6 10 m) 1.500 0.01300 ns
3 10 m/sec
LnT
c
= = =
3
1
8
1 (6 10 m) 1.500 0.01 300ns 86.6 ns
3 10 m/sec 3.46412 3 2 3MD
Ln
c
= = = =
![Page 48: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/48.jpg)
48
Example 3.8 (continued)
Example 3.8. (c) Next, find the maximum bit rate without errors on the fiber link. (Assume only
modal dispersion is present)
Solution: The maximum bit rate can be estimated in two ways. First, we may use the relationship between BT and the reciprocal of the delay , namely,
Or we can estimate it from the calculated rms pulse broadening from part (b).
(d) Find the bandwidth-length product corresponding to (c) above. Assume return-to-zero pulses.
9maximum
1 1 1( ) 1.67 Mbps
2 2 2 300 10 secTB
T −= = = =
9maximum
0.2 0.2( ) 2.31Mbps
86.6 10 secT
MD
B −
= = =
Bestestimate
2.31MHz 6 km 13.86 MHz kmoptB L = =
~
Senior, 3rd ed.Pages 117-118
![Page 49: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/49.jpg)
49
Questions are requested.
![Page 50: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/50.jpg)
50
![Page 51: EE 443/CS 543 Optical Fiber Communications Dr. Donald Estreich€¦ · 10. The numerical aperature NA of a fiber is 11. The acceptance angle ac is related to the NA by 12. Linearly](https://reader034.vdocument.in/reader034/viewer/2022051902/5ff202de8e534604157ece0b/html5/thumbnails/51.jpg)
Pulse Spreading Caused by Dispersion
https://www.researchgate.net/figure/Pulse-Spread-and-Attenuation-due-to-Dispersion_fig1_277014078
51
1 0 1