elite electronic engineering inc. commercial aviation ... · elite electronic engineering inc....
TRANSCRIPT
Elite Electronic Engineering Inc.
Commercial Aviation+MilitaryEMCTesting Services
One-Stop Testing Completed Accurately and on Your Schedule.
Elite Electronic Engineering Inc.
Elite is a leader in providing EMC and
environmental stress testing services
to the commercial aviation and military
industry. Our test and consulting engineers
assist manufacturers of aircraft avionics,
military equipment, and vehicles to comply
with rigorous governmental requirements
and OEM specifications.
The Elite Advantage• Expertise — Elite is an industry leader with a name
highly regarded in the aviation and military industry.
Testing with Elite means our test results and reports
are readily accepted and approved by OEMs along
with aviation and defense agencies.
• Trust — With more than 60 years of EMC services,
you can count on Elite to get the job done right,
and on time.
• Accreditations and Credentials — Elite is ISO17025
accredited to provide independent verification
of our processes, staff credentials, and capabilities.
We have many iNARTE Certified Engineers and
qualify as an iNARTE Test Lab.
• Scheduling and Convenience — As one of the
largest EMC labs in North America, we are configured
for responsive scheduling. And with a full capability
Environmental Stress Test Laboratory, we provide the
convenience of one-stop for all your qualification
needs.
What Makes Elite the Preferred Choice?
Range of Services
MIL, Aero, Auto, Commercial, Wireless
• RTCA DO-160 through Revision G, Boeing
D6-16050-4, Airbus ABD, Embraer, Bombardier
• MIL-STD-461/462 — Revision G, F, E, D, C, B, and A
• DEF-STAN-59-41 — U.K. Military EMC Spec
• MIL-STD-704, 1275, 1399 — Power Systems Testing
• Lockheed, Boeing, Airbus, and other OEM
Specifications
Unique Capabilities
• Test Plan Development — Fully Developed Aviation
or Military Test Plans/Procedures
• HIRF, Lightning, EMP (MIL-461 RS105) Test Services
• Whole Vehicle EMC Testing
• Large Walk-in Temperature Chamber for Electrical
Testing at Temperature
• Customized Support and Load Equipment
Development
Special Utilities
• Readily available AC (60Hz/400Hz) and DC Power
• LISNs (DC-480V 3phase) up to 200 Amps
• Waveguide, Filtered, or Fiber Optic Interfaces on
RF Test Chambers
• Compressed Air: 90PSI, 150CFM, Refrigeration
Dried; Cooling Water: 30PSI, 7GPM
• Forklifting Capabilities up to 15,000 lb
CHAMBER GROUND ID DIMENSIONS PLANE TYPE
L W H L W
11 19´ 20´ 14´ 16´ 6´ Semi-Anechoic
12 20´ 15´ 10´ 16´ 6´ Semi-Anechoic
14L 21´ 19´ 16´ 16´ 4´ Reverberation
14S 10´ 8´ 8´ 7.5´ 4´ Reverberation
16 19´ 20´ 12´ 20´ 7´ Semi-Anechoic
17 24´ 10´ 10´ 9´ 3.5´ Semi-Anechoic
19 19´ 20´ 12´ 16´ 4´ Semi-Anechoic
21 32´ 20´ 18´ Semi-Anechoic
22 70´ 33´ 18´ Semi-Anechoic
23 31´ 23´ 18´ 31´ 6´ Semi-Anechoic
23P 15´ 12´ 10´ 15´ 3´ Shielded Room
24 16´ 12´ 10´ 9´ 2.5´ Reverberation
25 23.5´ 21.5´ 14´ 16´ 5.5´ Semi-Anechoic
26 16´ 12´ 10´ 11.5´ 4´ Shielded Room
27 23´ 21.5´ 14´ 11´ 5´ Semi-Anechoic
28 16´ 12´ 10´ 10´ 4´ Shielded Room
29 32´ 20´ 18´ 10´ 4´ Semi-Anechoic
Elite EMC Chambers
We offer test chambers in various configurations, sizes,
absorber linings, power supplies, and monitoring systems
that can be tailored to your exact testing needs.
Elite’s EMC Test Chamber 12 Semi-Anechoic Shielded Test Enclosure Primary Testing Uses: MIL-STD and DO-160
Elite’s EMC Test Chamber 22 Semi-Anechoic Shielded Whole Vehicle Test Enclosure Primary Testing Uses: Automotive and MIL-STD
Elite’s Electromagnetic Pulse (EMP) simulator is designedto test in accordance with MIL-STD-461 RS105 at pulseamplitudes in excess of 50,000V/m.
Elite Radiated Susceptibility (and HIRF) Capabilities
Actual field intensity may be affected by test item loading.
Range (MHz) Elite’s Field Intensity (V/m) Elite’s Field Intensity (V/m)
400 – 1000 1000 (CW, SW, AM & PM) 1000 (CW, SW, AM & PM)
1000 – 4000 800 (CW, SW) 4000 (PM) 800 (CW, SW) 5000 (PM)
4000 – 8000 800 (CW, SW) 4000 (PM) 800 (CW, SW) 6000 (PM)
8000 – 18000 800 (CW, SW) 4000 (PM) 800 (CW, SW) 5000 (PM)
18000 – 26500 600 (CW, SW, PM) 600 (CW, SW, PM)
26500 – 40000 400 (CW, SW, PM) 400 (CW, SW, PM)
˜̃ ˜̃
The one-stop testing experience that gets your products to market efficiently and cost effectively.
To find out more: www.elitetest.com | 1-800-354-8311
Elite Induced Effects Lightning Capabilities
Elite has the expertise and equipment to apply DO-160
Section 22 Secondary Effects Lightning transients including
single stroke (SS), multi-burst (MB), and multi-stroke (MS)
pulses. Elite can apply all RTCA DO-160 waveforms at
Level 5. Other specifications include MIL-461G CS117,
Boeing D6-16050-4, and Airbus ABD0100.1.2.
• Pin Test Waveforms and Levels:
· Single Stroke and Multiple Stroke all waveforms to Level 5
· Ex, DO-160G Waveforms 2, 3, 4, 5a (Level 5)
• Cable Induction & Cable Injection Methods:
· Multiple Burst —Waveform 3 and Waveform 6 capability
· Waveform 3 or 6 multiple burst threat to Level 5
Note: Elite has two Thermo Scientific ECAT Lightning Test Systems.Contact Elite for other customized lightning and surge waveformsand testing.
Programmable and Steady State
Power Capabilities
Elite power supply systems are configured for
DO-160 Sec 16, MIL-HDBK-704, MIL-1275, Boeing
Elite’s lightning capabilities include pin injection, cable injection, and ground injection. With our large coupling probes Elite can cable inject WF4 and WF5A current or voltage transients up to Level 5.
3-phase AC
(30kVA)
40-5000Hz
Single phase AC
(30kVA)
40-5000Hz
DC: (30kVA)
208VAC 84A/phase
156VAC 190A
120VAC 250A
312VAC 95A
270VDC 140A
28VDC 250A
50/60Hz AC
400Hz AC (90kVA)
DC
3 phase 208VAC 200A
3-phase 208VAC 30A*
3-phase 208VAC 200A
3-phase 208VAC 30A
600VDC 17A
270VDC 140 A
28VDC 1000A
Programmable Power Supplies
Steady State Power Supplies
*30A are available at RF chambers, contact Elite for 200A service.