embedded systems based smart energy meter abstract
DESCRIPTION
Abstract of Embedded Systems Based Smart Energy Meter using ultra low power components.TRANSCRIPT
7/16/2019 Embedded Systems Based Smart Energy Meter Abstract
http://slidepdf.com/reader/full/embedded-systems-based-smart-energy-meter-abstract 1/2
Embedded Systems Based Smart Energy Meter
Students:
Ashish Manjunath
Ashish S Koujalgi
Dhanush C Kumar
Sriram A
Guide: Mr. M D Nandeesh
Instrumentation Technology Dept,
MSRIT, Bangalore
7/16/2019 Embedded Systems Based Smart Energy Meter Abstract
http://slidepdf.com/reader/full/embedded-systems-based-smart-energy-meter-abstract 2/2
Abstract
This paper presents a single phase smart energy meter based on embedded
systems which operates on ultra-low power. This smart energy meter does not have
any mechanical rotating parts that are seen in most of the existing domestic energymeters. The measurement and calculation of the energy consumption is done by the
IC: CS5480, which is a 24-bit, ultra low power consuming, high precision with
serial communication IC.
The IC incorporates different methods and schemes of signal conditioning to
obtain a noise free data. The IC includes Pre-Gain Amplifier, 4th
Order Delta-
Sigma Modulator, Digital Filters - sinc3,
IIR Filters, High Pass Filters, Decimation
Filters for each of the three analog channels. This IC communicates with the
powerful micro-controller (Renesas RL78/I1B). The communication is done
through the UART channel, wherein, the parameters measured by the EnergyMeter IC are accessed in the Micro-controller.
A custom LCD is used to display the measured parameters. The Micro-
controller has 2 other UART channels. One, which can be used to communicate to
GSM Module for power consumption supervision and sending real-time SMS to
user and two, PC data logging of the overall energy consumption.
This project uses a transformerless power supply to achieve low cost and
low power consumption, RTC, battery back-up function and on-chip temperature
measurement.