emtelle aerial blown fibre - exim kábel€¦ · emtelle code 9248 integral bearer cable fitting...
TRANSCRIPT
Emtelle Aerial Blown Fibre
Solution Overview
• For Span Lengths of between 30-60 metres
• Only One Tube Bundle between Poles
• A Joint Closure can be added every 5 poles or more
depending on housing density
• Tubes can be dropped off from Poles to Homes directly,
then fibre is blown in
Cable Clamp AC68L
Emtelle Code 9248
Integral Bearer cable Fitting
Suspension Clamp
Emtelle code 9252
S- hook
Emtelle Code 9354
D-side E-side
Product code: 61834
2 x 10/8 tubes and 8 x 5/3.5mm tubes
Product code: CP922
Aerial Branch ClosureEmtelle Code 70957
Customer Leap In Point
12 – 72 fibres fit into the 10/8 tubes
Product Map: Over Head
Product Code: UK_DS_7500
1way Drop tube 7/3.7mm
2 fibre for FTTH, Emtelle code 9032
4 way 5/3.5mm Tube Bundle. Emtelle Code CP902D
Dome Splice
Enclosure, Overhead
Code 9040
Tube Bundle Information
Drop Microduct Information
Hanging Information
Hanging
Information
Drop Closure
• Installed without tools
• Span Mounted
• 4 drop ducts per closure
Splice Closure• Mole Mounted, Cabinet Mounted or installed in manhole
• 8 customer drops, plus Tube Bundle compatible
• 72 fibre splicing capacity
• IP68 Rated
• Mounting bracket available (below)
Blown Fiber Accessories
Full Range of straight connectors, Direct Bury Connectors, Reducers, Ends stops, Gas
Seals and water seals – No other Blown Fiber manufacturer has access to all of the
connectors shown below
Straight
Connectors
Straight
ReducersEnd Caps
Direct Bury &
Lock Connector
Gas & Water
Block Connectors
Centre Blow
Connectors
(Closedowns)
Splittable cable
and ducts seals
Blown Fiber Bundles & Cables
Full Range of Fiber Bundles and Mini Cables, manufactured by Emtelle or preferred
partner if required.
2, 4,6,8 & 12 fibers / bundle
Diameter 1.1mm – 1.6mm
Available in Singlemode G652d,
G657A1, G657A2,
MultimodeOM1, OM2, OM3 &
OM4
Emtelle are one of the only companies in the world to manufacture Tube Bundles, Mini Cables, & Fibre Bundles at one
manufacturing plant – This means that you can buy all products under 1 Guarantee
FIBER BUNDLE MINI CABLE
Mini cables vary from 5.8mm – 10.5mm diameter for 24-288 fiber
G657A1 & G652d
• 4 fiber - upto 1500m max in typical route
• 500m in this route (up and down 4 times)
(average installation speed was 49m/min)
• 8 & 12 fiber 800 – 1000m
• 72 fiber cable in 10/8 tube, 1000-1500m
• 72 fiber cable in 12/9.4mm tube 2.2km
• 96 fiber cable in 12/9.4mm tube 1000m
The above distances are point to point blows.
Fiber can be centre blown and onward blown
to get 6km splice-less fibre lengths.
How Far can you blow fiber in One point to point blow ?
Other Overhead ProductsEmtelle have developed overhead systems for clients overseas and in the UK. Below is an example of the products which are currently available. Overhead solutions may play a critical part in connecting rural communities.
Benefits of Blown Fibre on Poles
• A ‘One Time’ installation for many tube pathways.
• The new system of 14mm tubes can take 96 or even 144 fiber mini cables.
• The smaller 4/2.7mm tubes can take 2 or 4 fibers bundles.
• The 5/3.5mm tubes can accommodate 2,4,8 or 12 fiber bundles.
FTTX Global Projects
FTTX
Global
Projects
KEY FACTORS FOR FTTH INSTALLATIONS
• EASY TO INSTALL, ASSEMBLE AND USE PRODUCTS
• REDUCED SKILL REQUIREMENTS SO INSTALLATION
CANNOT GO WRONG
• COST EFFECTIVE AND UPGRADEABLE
• ADAPTED FOR LOW COST CONSTRUCTION
TECHNIQUES
Fibre installation EquipmentThis blowing machine is
manufactured for Emtelle and is
electronically driven, monitoring
fibre at all times. No other blowing
machine has this ability
BLOWING EQUIPMENT – MINI CABLES
• 100-240V OPERATION
•OR PNEUMATICALLY DRIVEN (BETTER)
•12-15 BAR AIR PRESSURE REQUIRED WITH
AFTERCOOLER & FILTRATION
• ACCEPTS CABLES FROM 3-11MM DIAMETER
Emtelle - Our Key Features
(compared to other manufacturers)
• Un-rivaled Product Range ( Over 1000 designs)
• Largest single Microtube manufacture plant
• One of the only companies to make tube bundles, fiber
bundles & fiber mini cables (upto 96 fibres)
• The largest range of tube connectors
• Sole supplier to British Telecom – The Inventors of Blown
Fiber solutions
• Emtelle seen as the pioneers of Blown Fiber Tubes –
Other manufacturers follow our lead with regards to design
• Engineers have between 5-20 years field experience
• Emtelle carry out cable blowing trials and approvals for
Telecom Operators
Contact
• Adress: 6 Naplás Street, 2142 Nagytarcsa
• Phone: +361 323-1097
• Mobil: +3630 297-7378
• Email: [email protected] ; [email protected]
• Website: www.eximkabel.com ; www.emtelle.com
• Online catalogue: http://www.emtelle.com/emtelle-fibreflow-catalogue/
• Youtube channel: https://www.youtube.com/user/Emtelle1