endmill - factory max
TRANSCRIPT
EN
DM
ILL
EN
DM
ILL
Ball End Mill
Radius End Mill
Drill
Square End Mill
MUGEN Coating Premium End Mill Series
CBN End Mill Series
Ball End Mill
Radius End Mill
Drill
Square End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
Square End Mill
Square End Mill
Ball End Mill
EN
DM
ILL
Ball End Mill
Taper End Mill
Taper Ball End Mill
Radius End Mill
End Mill for Aluminum
Endmill for Copper
Chuck
Inner Radius Cutter
Ball End Mill
Ball End Mill
Solid Carbide ASHINAGA CHUCK
EN
DM
ILL
184
Code No. (R)Radius
EffectiveLength
( )Dia.(D)
NeckTaper Angle
(y°)
Lengthof Cut
( )
0.10.2
0.250.30.40.50.60.7
0.750.80.91
0.51
1.251.52
2.53
3.53.84
4.55
0.150.3
0.380.50.60.70.8111
1.21.2
0.20.40.50.60.81
1.21.41.51.61.82
Sharpened edge at R-center improves shearing ability.Continuous 10 hour machining on hardened steel of HRC60.Long-lasting high surface accuracy Rz1.5 mm.Save significant time at polishing process.We recommend using oil mist coolant.
01-00500-0010001-00500-0020001-00500-0025001-00500-0030001-00500-0040001-00500-0050001-00500-0060001-00500-0070001-00500-0075001-00500-0080001-00500-0090001-00500-01000
ShankDia.(d)
OverallLength
(L)
12°12°12°12°12°12°12°12°12°12°12°12°
444444444444
50
50
50
50
50
50
50
52
52
52
52
52
When you order, indicate SFB200 (R) ( ) is reference value.y°
UnderNeck Dia.
(d2)
0.180.370.460.560.760.951.151.351.451.551.751.94
Sharp tooth edge guarantees long andconsistent accuracy.
Unit [size : mm]
With “R” Measuring Data
y°
SFB200CBN Super Finish Ball End Mill
CBN End Mill Series
EN
DM
ILL
185
This CBN Ball End Mill has realized both advantages of CBN and Carbide.Depth of Cut can be increased at the equivalent level to Carbide.Unique flute design with R-accuracy ±0.005 prevents chipping!Flute is smoothly tangent from straight line to R-curve.Applicable for hardened materials up to 68HRC.We recommend using oil mist coolant.
Code No. (R)Radius
EffectiveLength
( )Dia.(D)
NeckTaper Angle
(y°)
Lengthof Cut
( )
0.30.40.50.6
0.75
1
1.52
2.53
3.845
0.50.60.70.81
1.2
0.60.81
1.21.5
2
01-00510-0030001-00510-0040001-00510-0050001-00510-0060001-00510-0075001-00510-0100101-00510-01000
ShankDia.(d)
OverallLength
(L)
15゜15゜15゜15゜15゜
15゜
44444
4
50
50
50
50
52
52
UnderNeck Dia.
(d2)
0.560.760.951.151.45
1.94
Bigger cutting depth was realized withbetter chip disposal.
When you order, indicate SSB200 (R) x ( ) ( ) is reference value.y°
y°
SSB200CBN Super Speed Ball End Mill
CBN End Mill Series
EN
DM
ILL
186
Lineup of CBN tool with long neck applicable to deep milling, available 23 sizes in total.Enables milling more deeply by long effective length up to 10mm comparing with conventional CBN tools.Enables wider application for milling by long neck in addition to long life and accurate finishing.Standardized in R0.05 at smallest.Unique flute design with R-accuracy ±0.005 prevents chipping!We recommend using oil mist coolant.
Code No. (R)RRadius
EffectiveLength
( )Dia.(D)
NeckTaper Angle
(y°)
Lengthof Cut
( )
0.05
0.1
0.15
0.2
0.25
0.3
0.4
0.5
0.75
1
0.30.50.61
0.91.51.22
1.52.534544568
107.568
10
0.08
0.15
0.23
0.3
0.38
0.5
0.6
0.7
1
1.2
0.1
0.2
0.3
0.4
0.5
0.6
0.8
1
1.5
2
01-00511-0005101-00511-0005201-00511-0010101-00511-0010201-00511-0015101-00511-0015201-00511-0020101-00511-0020201-00511-0025101-00511-0025201-00511-0030101-00511-0030201-00511-0030301-00511-0040101-00511-0050101-00511-0050201-00511-0050401-00511-0050601-00511-0050801-00511-0075101-00511-0100101-00511-0100301-00511-01005
ShankDia.(d)
OverallLength
(L)
15°
15°
15°
15°
15°
15°
15°
15°
15°
15°
4
4
4
4
4
4
4
4
4
4
4
50
50
50
50
50
50
52
53
53
52
52
UnderNeck Dia.
(d2)
0.085
0.18
0.28
0.37
0.46
0.56
0.76
0.95
1.45
1.94
Unit [size : mm]
When you order, indicate SSBL200 (R) x ( )(y°) is reference value.
SSBL200CBN Super Speed Long Neck Ball End Mill
CBN End Mill Series
EN
DM
ILL
187
Realized high efficient machining with radius flute along with excellent wear resistance of CBN.Realized excellent surface roughness by intoroducing smooth tangent on all over flute. (corner accuracy : ±5 mm)Applicable for work materials from tempered steel to hardened steel (up to 68 HRC).We recommend using oil mist coolant.
Code No.EffectiveLength
( )Dia.(D)
NeckTaper Angle
(y°)
Lengthof Cut
( )
0.2
0.3
0.4
0.02
0.03
0.05
0.02
0.03
0.05
0.02
0.03
0.510.510.510.511.520.511.520.511.520.511.520.511.52
0.08
0.13
0.24
01-00490-0202101-00490-0202201-00490-0203101-00490-0203201-00490-0205101-00490-0205201-00490-0302101-00490-0302201-00490-0302301-00490-0302401-00490-0303101-00490-0303201-00490-0303301-00490-0303401-00490-0305101-00490-0305201-00490-0305301-00490-0305401-00490-0402101-00490-0402201-00490-0402301-00490-0402401-00490-0403101-00490-0403201-00490-0403301-00490-04034
ShankDia.(d)
OverallLength
(L)
15°
15°
15°
4
4
4
50
50
50
UnderNeck Dia.
(d2)
0.18
0.28
0.37
(R)RCornerRadius
Unit [size : mm]
R±0.005(R>0.03)R±0.002(R 0.03)<=
When you order, indicate SSR200 (D) x (R) x ( ). ( ) is reference value.y
SSR200CBN Super Speed Radius End Mill
CBN End Mill Series
EN
DM
ILL
188
SSR200CBN Super Speed Radius End Mill
Realized high efficient machining with radius flute along with excellent wear resistance of CBN.Realized excellent surface roughness by intoroducing smooth tangent on all over flute. (corner accuracy : ±5 mm)Applicable for work materials from tempered steel to hardened steel (up to 68 HRC).We recommend using oil mist coolant.
Code No.EffectiveLength
( )Dia.(D)
NeckTaper Angle
(y°)
Lengthof Cut
( )
0.4
0.5
0.6
0.05
0.1
0.02
0.03
0.05
0.1
0.02
0.03
0.05
0.1
0.511.520.511.520.511.52.50.511.52.50.511.52.50.511.52.50.511.52.50.511.52.50.511.52.50.511.52.5
01-00490-0405101-00490-0405201-00490-0405301-00490-0405401-00490-0410101-00490-0410201-00490-0410301-00490-0410401-00490-0502001-00490-0502201-00490-0502101-00490-0502301-00490-0503001-00490-0503201-00490-0503101-00490-0503301-00490-0505001-00490-0505201-00490-0505101-00490-0505301-00490-0510001-00490-0510201-00490-0510101-00490-0510301-00490-0602101-00490-0602201-00490-0602301-00490-0602401-00490-0603101-00490-0603201-00490-0603301-00490-0603401-00490-0605101-00490-0605201-00490-0605301-00490-0605401-00490-0610101-00490-0610201-00490-0610301-00490-06104
ShankDia.(d)
OverallLength
(L)
15°
15°
15°
UnderNeck Dia.
(d2)
(R)RCornerRadius
Unit [size : mm]
R±0.005(R>0.03)R±0.002(R 0.03)<=
When you order, indicate SSR200 (D) x (R) x ( ). ( ) is reference value.y
0.24
0.3
0.3
0.37
0.46
0.56
4
5
6
50
48
50
48
50
48
50
48
50
48
50
48
50
48
50
48
50
CBN End Mill Series
EN
DM
ILL
189
SSR200CBN Super Speed Radius End Mill
Realized high efficient machining with radius flute along with excellent wear resistance of CBN.Realized excellent surface roughness by intoroducing smooth tangent on all over flute. (corner accuracy : ±5 mm)Applicable for work materials from tempered steel to hardened steel (up to 68 HRC).We recommend using oil mist coolant.
Code No.EffectiveLength
( )Dia.(D)
NeckTaper Angle
(y°)
Lengthof Cut
( )
0.8
1
1.5
0.02
0.03
0.05
0.1
0.02
0.03
0.05
0.1
0.2
0.3
0.02
0.03
1.52.551.52.551.52.551.52.5512351235123512351235123534.57.53
01-00490-0802101-00490-0802201-00490-0802301-00490-0803101-00490-0803201-00490-0803301-00490-0805101-00490-0805201-00490-0805301-00490-0810101-00490-0810201-00490-0810301-00490-1002001-00490-1002201-00490-1002101-00490-1002301-00490-1003001-00490-1003201-00490-1003101-00490-1003301-00490-1005001-00490-1005201-00490-1005101-00490-1005301-00490-1010001-00490-1010201-00490-1010101-00490-1010301-00490-1020001-00490-1020201-00490-1020101-00490-1020301-00490-1030001-00490-1030201-00490-1030101-00490-1030301-00490-1502001-00490-1502101-00490-1502301-00490-15030
ShankDia.(d)
OverallLength
(L)
15°
15°
15°
UnderNeck Dia.
(d2)
(R)RCornerRadius
Unit [size : mm]
R±0.005(R>0.03)R±0.002(R 0.03)<=
When you order, indicate SSR200 (D) x (R) x ( ). ( ) is reference value.y
50
53
50
53
50
53
50
5349
50
5349
50
5349
50
5349
50
5349
50
5349
50
53
52
0.56
0.7
1
0.76
0.95
1.45
4
4
4
CBN End Mill Series
EN
DM
ILL
190
SSR200CBN Super Speed Radius End Mill
Realized high efficient machining with radius flute along with excellent wear resistance of CBN.Realized excellent surface roughness by intoroducing smooth tangent on all over flute. (corner accuracy : ±5 mm)Applicable for work materials from tempered steel to hardened steel (up to 68 HRC).We recommend using oil mist coolant.
Code No.EffectiveLength
( )Dia.(D)
NeckTaper Angle
(y°)
Lengthof Cut
( )
1.5
2
0.03
0.05
0.1
0.2
0.3
0.02
0.03
0.05
0.1
0.2
0.3
0.5
4.57.534.57.534.57.534.57.534.57.54610461046104610461046104610
01-00490-1503101-00490-1503301-00490-1505001-00490-1505101-00490-1505301-00490-1510001-00490-1510101-00490-1510301-00490-1520001-00490-1520101-00490-1520301-00490-1530001-00490-1530101-00490-1530301-00490-2002001-00490-2002101-00490-2002301-00490-2003001-00490-2003101-00490-2003301-00490-2005001-00490-2005101-00490-2005301-00490-2010001-00490-2010101-00490-2010301-00490-2020001-00490-2020101-00490-2020301-00490-2030001-00490-2030101-00490-2030301-00490-2050001-00490-2050101-00490-20503
ShankDia.(d)
OverallLength
(L)
15°
15°
UnderNeck Dia.
(d2)
(R)RCornerRadius
Unit [size : mm]
R±0.005(R>0.03)R±0.002(R 0.03)<=
When you order, indicate SSR200 (D) x (R) x ( ). ( ) is reference value.y
52
51
52
1
1.2
1.45
1.94
4
4
CBN End Mill Series
EN
DM
ILL
191
Code No.EffectiveLength
( )Dia.(D)
NeckTaper Angle
(y°)
FluteLength
( )0.20.30.40.50.60.70.80.91
1.11.21.31.41.51.61.71.81.92
0.10.150.2
0.250.3
0.350.4
0.450.5
0.550.6
0.650.7
0.750.8
0.850.9
0.951
11.52
2.53
3.54
4.55
5.56
6.57
7.58
8.59
9.510
04-00050-0100004-00050-0150004-00050-0200004-00050-0250004-00050-0300004-00050-0350004-00050-0400004-00050-0450004-00050-0500004-00050-0550004-00050-0600004-00050-0650004-00050-0700004-00050-0750004-00050-0800004-00050-0850004-00050-0900004-00050-0950004-00050-10000
ShankDia.(d)
OverallLength
(L)
15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°
4444444444444444444
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
UnderNeck Dia.
(d2)
0.0850.130.180.230.280.320.370.410.460.510.560.610.660.710.760.810.860.9
0.95
Unit [size : mm]
Precise drilling on hardened steel (65HRC)!Equable hole accuracy and stably long tool life!Drilling on high hardened steel ( 0.1~)!
When you order, indicate MSDH (D).( ) is reference value.
MSDHProcision drill for Hardened Steel
MUGEN Coating Premium End Mill Series
EN
DM
ILL
192
Code No. Dia.(D)
NeckTaper Angle
(y°)
Lengthof cut
( )23468
11.5234
08-00427-0010008-00427-0015008-00427-0020008-00427-0030008-00427-00400
ShankDia.(d)
OverallLength
(L)
12°12°12°12°12°
66666
60
60
60
60
60
Code No. Dia.(D)
NeckTaper Angle
(y°)
Lengthof cut
( )10151218162420302436
5
6
8
10
12
ShankDia.(d)
OverallLength
(L)
12°12° - - - - - - - -
66668810101212
60
65
60
65
65
70
75
80
80
90
Stably long tool life on milling hardened steel. Available L/D 2 and 3.Selective for conformed tools.
When you order, indicate MHDH445 (D).
Unit [size : mm] Unit [size : mm]
08-00428-0050008-00428-0050108-00428-0060008-00428-0060108-00428-0080008-00428-0080108-00428-0100008-00428-0100108-00428-0120008-00428-01201
When you order, indicate MHDH645 (D) x ( ).
MHDH445 MHDH6454-Flute Square End Mill for Hardened Steels 6-Flute Square End Mill for Hardened Steels
MUGEN Coating Premium End Mill Series
EN
DM
ILL
193
Code No.EffectiveLength
( )Dia.(D)
NeckTaper Angle
(y°)
Lengthof cut
( )0.30.5
0.751
0.30.5
0.751
1.50.5
0.751
1.521
1.52
2.531
1.52
2.53
3.541
1.52
2.5345
1.523456
0.1
0.15
0.2
0.3
0.4
0.5
0.6
0.08
0.12
0.15
0.25
0.3
0.4
0.5
0.085
0.13
0.18
0.28
0.37
0.46
0.56
4
4
4
4
4
4
4
45
45
45
45
45
45
45
08-00207-0100308-00207-0100508-00207-0100708-00207-0101008-00207-0150308-00207-0150508-00207-0150708-00207-0151008-00207-0151508-00207-0200508-00207-0200708-00207-0201008-00207-0201508-00207-0202008-00207-0301008-00207-0301508-00207-0302008-00207-0302508-00207-0303008-00207-0401008-00207-0401508-00207-0402008-00207-0402508-00207-0403008-00207-0403508-00207-0404008-00207-0501008-00207-0501508-00207-0502008-00207-0502508-00207-0503008-00207-0504008-00207-0505008-00207-0601508-00207-0602008-00207-0603008-00207-0604008-00207-0605008-00207-06060
ShankDia.(d)
OverallLength
(L)
12°
12°
12°
12°
12°
12°
12°
Neck Dia.(d2)
When you order, indicate MHRH230(D) x ( )
Unit [size : mm]
Mugen Coating Premium to improve accuracy and tool life on machining hardened steel!Total 83 size!
MHRH2302-Flute Long Neck End Mill for Hardened Steels
MUGEN Coating Premium End Mill Series
EN
DM
ILL
194
Code No.EffectiveLength
( )Dia.(D)
NeckTaper Angle
(y°)
Lengthof cut
( )4683468
1068
1012468
1012141668
101214161868
1012141618208
1216208
1216202530
0.8
1
1.2
1.5
1.8
2
2.5
3
0.65
0.8
1
1.2
1.4
1.6
2
4.5
0.76
0.95
1.15
1.45
1.75
1.94
2.4
2.85
4
4
4
4
4
4
4
4
4550
50
50
50
60
50
60
50
60
50
6050
60
70
08-00207-0804008-00207-0806008-00207-0808008-00207-1003008-00207-1004008-00207-1006008-00207-1008008-00207-1010008-00207-1206008-00207-1208008-00207-1210008-00207-1212008-00207-1504008-00207-1506008-00207-1508008-00207-1510008-00207-1512008-00207-1514008-00207-1516008-00207-1806008-00207-1808008-00207-1810008-00207-1812008-00207-1814008-00207-1816008-00207-1818008-00207-2006008-00207-2008008-00207-2010008-00207-2012008-00207-2014008-00207-2016008-00207-2018008-00207-2020008-00207-2508008-00207-2512008-00207-2516008-00207-2520008-00207-3008008-00207-3012008-00207-3016008-00207-3020008-00207-3025008-00207-30300
ShankDia.(d)
OverallLength
(L)
12°
12°
12°
12°
12°
12°
12°
12°
Neck Dia.(d2)
When you order, indicate MHRH230(D) x ( )
Unit [size : mm]
Mugen Coating Premium to improve accuracy and tool life on machining hardened steel!Total 83 size!
MHRH2302-Flute Long Neck End Mill for Hardened Steels
MUGEN Coating Premium End Mill Series
EN
DM
ILL
195
Code No.EffectiveLengthDia.
(D)
NeckTaper Angle
(y°)
Lengthof cut
468
1068
101268
1012141668
101214161868
1012141618208
121620258
1216202530
1
1.2
1.5
1.8
2
2.5
3
0.8
1
1.2
1.4
1.6
2
4.5
0.95
1.15
1.45
1.74
1.94
2.4
2.85
4
4
4
4
4
4
6
50
50
50
50
50
60
50
60
7050
60
70
08-00217-0100408-00217-0100608-00217-0100808-00217-0101008-00217-0120608-00217-0120808-00217-0121008-00217-0121208-00217-0150608-00217-0150808-00217-0151008-00217-0151208-00217-0151408-00217-0151608-00217-0180608-00217-0180808-00217-0181008-00217-0181208-00217-0181408-00217-0181608-00217-0181808-00217-0200608-00217-0200808-00217-0201008-00217-0201208-00217-0201408-00217-0201608-00217-0201808-00217-0202008-00217-0250808-00217-0251208-00217-0251608-00217-0252008-00217-0252508-00217-0300808-00217-0301208-00217-0301608-00217-0302008-00217-0302508-00217-03030
ShankDia.(d)
OverallLength
(L)
12°
12°
12°
12°
12°
12°
12°
Neck Dia.(d2)
Unit [size : mm]
Improve tool rigidity for precision machiningTotal 55 size!
When you order, indicate MHRH430(D) x (l1)
3
6 6
(l)
l
(l1)
l1
MHRH4304-Flute Long Neck End Mill for Hardened Steels
MUGEN Coating Premium End Mill Series
EN
DM
ILL
196
Unit [size : mm]
Improve tool rigidity for precision machiningTotal 55 size!
3
6 6
Code No.EffectiveLength
( )Dia.(D)
NeckTaper Angle
(y°)
Lengthof cut
( )121620253035401625355020304050
4
5
6
6
7.5
9
3.8
4.8
5.8
6
6
6
5060
70
80906070801108090100110
08-00217-0401208-00217-0401608-00217-0402008-00217-0402508-00217-0403008-00217-0403508-00217-0404008-00217-0501608-00217-0502508-00217-0503508-00217-0505008-00217-0602008-00217-0603008-00217-0604008-00217-06050
ShankDia.(d)
OverallLength
(L)
12°
12°
-
Neck Dia.(d2)
When you order, indicate MHRH430(D) x ( )
MHRH4304-Flute Long Neck End Mill for Hardened Steels
MUGEN Coating Premium End Mill Series
EN
DM
ILL
197
Standard ball end mill for hardened steel, suitable for finishing processApplicable for hardened steel up to 65HRC
When you order, indicate MSBH230 (R) x (d). ( ) is reference value.
Code No. Dia.(D)
(R)RRadius
NeckTaper Angle
(y°)
Lengthof Cut
0.050.075
0.10.150.2
0.250.30.40.5
0.751
1.251.522
2.53456
0.10.150.20.30.60.80.91.21.52.33
3.85668
10121520
0.10.150.20.30.40.50.60.81
1.52
2.53445681012
08-00507-0000508-00507-0000708-00507-0001008-00507-0001508-00507-0002008-00507-0002508-00507-0003008-00507-0004008-00507-0005008-00507-0007508-00507-0010008-00507-0012508-00507-0015008-00507-0020008-00507-0020108-00507-0025008-00507-0030008-00507-0040008-00507-0050008-00507-00600
Shank Dia.(d)
OverallLength
(L)
505050505050505050506060607070708090100100
12°12°12°12°12°12°12°12°12°12°12°12°12°12°
-12°
----
4444444444466646681012
Unit [size : mm]
y°
l
(l)
MSBH2302-Flute Ball End Mill for Hardened Steels
MUGEN Coating Premium End Mill Series
EN
DM
ILL
198
Code No. Dia.(D)
Radius.(R)
NeckTaper Angle
(y°)
Lengthof cut
( )0.51
1.52
2.53
1.53568
10
08-00607-0005008-00607-0010008-00607-0015008-00607-0020008-00607-0025008-00607-00300
ShankDia.(d)
OverallLength
(L)
12°12°12°12°12° -
666666
60
60
60
70
70
80
123456
When you order, indicate MSBH345(R).( ) is reference value.
Mugen Coating Premium realizes long tool life for machining on high-hardened steel.Original 3-flute design and unequal flute spacing to suppress chattering realize high efficientmachining.
Unit [size : mm]
MSBH3453-Flute Ball End Mill for Hardened Steels
MUGEN Coating Premium End Mill Series
EN
DM
ILL
199
Mugen Coating Premium for hardened steel and unique new design excel in chipping prevention and resolves chattering to realize excellent finished surface. Applicable for hardened steel up to 65HRC
Code No. (R)RRadius
EffectiveLength
( )Neck
Taper Angle(y°)
0.05
0.075
0.1
0.15
0.2
0.25
0.20.30.50.30.51
0.50.75
11.251.5
1.752
2.53
0.61
1.251.5
1.752
2.252.53
3.54
0.81
1.52
2.53
3.54
4.551
1.52
2.53
3.54
0.07
0.1
0.15
0.2
0.3
0.35
0.1
0.15
0.2
0.3
0.4
0.5
08-00527-0005008-00527-0005108-00527-0005308-00527-0007108-00527-0007308-00527-0007508-00527-0010108-00527-0010208-00527-0010308-00527-0010408-00527-0010508-00527-0010608-00527-0010708-00527-0010808-00527-0010908-00527-0015008-00527-0015108-00527-0015208-00527-0015308-00527-0015408-00527-0015508-00527-0015608-00527-0015708-00527-0015908-00527-0016008-00527-0016108-00527-0020108-00527-0020208-00527-0020308-00527-0020408-00527-0020508-00527-0020608-00527-0020708-00527-0020808-00527-0020908-00527-0021008-00527-0025008-00527-0025108-00527-0025208-00527-0025308-00527-0025408-00527-0025508-00527-00256
ShankDia.(d)
OverallLength
(L)
0.085
0.13
0.18
0.28
0.37
0.46
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
4
4
4
4
4
4
45
45
45
45
45
45
0.24
0.34
0.55
0.36
0.57
1.09
0.56
0.82
1.08
1.34
1.6
1.86
2.13
2.65
3.17
0.66
1.08
1.34
1.6
1.86
2.12
2.38
2.64
3.17
3.69
4.21
0.89
1.1
1.62
2.15
2.67
3.19
3.71
4.23
4.75
5.27
1.13
1.65
2.17
2.69
3.21
3.73
4.25
0.25
0.36
0.57
0.37
0.59
1.13
0.58
0.85
1.13
1.4
1.67
1.94
2.22
2.76
3.31
0.69
1.12
1.39
1.67
1.94
2.21
2.48
2.76
3.3
3.85
4.39
0.93
1.14
1.69
2.23
2.78
3.32
3.87
4.41
4.96
5.5
1.16
1.71
2.25
2.8
3.34
3.89
4.43
0.26
0.37
0.6
0.39
0.61
1.18
0.61
0.89
1.18
1.46
1.75
2.03
2.32
2.89
3.46
0.71
1.17
1.45
1.74
2.02
2.31
2.59
2.88
3.45
4.02
4.59
0.96
1.19
1.76
2.33
2.9
3.47
4.04
4.61
5.18
5.75
1.21
1.78
2.35
2.92
3.49
4.06
4.63
0.27
0.39
0.63
0.4
0.64
1.24
0.63
0.93
1.23
1.53
1.83
2.13
2.43
3.02
3.62
0.74
1.22
1.52
1.82
2.12
4.42
2.71
3.01
3.61
4.21
4.81
1
1.24
1.84
2.43
3.03
3.63
4.23
4.83
5.43
6.02
1.26
1.85
2.45
3.05
3.65
4.25
4.85
0.29
0.42
0.69
0.44
0.7
1.37
0.69
1.02
1.35
1.68
2.02
2.35
2.68
3.34
4.01
0.81
1.34
1.67
2
2.33
2.66
3
3.33
3.99
4.65
5.32
1.09
1.35
2.02
2.68
3.34
4.01
4.67
5.33
6
6.66
1.37
2.03
2.69
3.36
4.02
4.69
5.35
12°
12°
12°
12°
12°
12°
Dia. (D)
Unit [size : mm]
Act
ual E
ffect
ive
Inclined Angle
When you order, indicate MRBH230 (R) x ( ). ( ) is reference value.y°
MRBH230Long Neck End Mill (for Hardened Steels)
MUGEN Coating Premium End Mill Series
EN
DM
ILL
200
When you order, indicate MRBH230 (R) x ( ). ( ) is reference value.y°
Code No. (R)RRadius
EffectiveLength
( )Neck
Taper Angle(y°)
0.25
0.3
0.4
0.5
4.55
5.5681
1.52
2.53
3.5456789
10122345678
101223456789
101214161820
0.35
0.45
0.6
0.75
0.5
0.6
0.8
1
08-00527-0025708-00527-0025808-00527-0025908-00527-0026008-00527-0026208-00527-0030008-00527-0030108-00527-0030208-00527-0030308-00527-0030408-00527-0030508-00527-0030608-00527-0030808-00527-0031008-00527-0031208-00527-0031408-00527-0031608-00527-0031808-00527-0032008-00527-0040108-00527-0040208-00527-0040308-00527-0040408-00527-0040508-00527-0040608-00527-0040708-00527-0040908-00527-0041008-00527-0050008-00527-0050108-00527-0050208-00527-0050308-00527-0050408-00527-0050508-00527-0050608-00527-0050708-00527-0050808-00527-0050908-00527-0051008-00527-0051108-00527-0051208-00527-00513
ShankDia.(d)
OverallLength
(L)
0.46
0.56
0.76
0.95
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
4
4
4
4
45
45
45
45
4.78
5.3
5.82
6.34
8.42
1.12
1.64
2.17
2.69
3.21
3.73
4.25
5.29
6.34
7.38
8.42
9.47
10.51
12.59
2.16
3.2
4.25
5.29
6.33
7.38
8.42
10.5
12.59
2.18
3.22
4.27
5.31
6.35
7.4
8.44
9.48
10.52
12.61
14.7
16.78
18.87
20.95
4.98
5.52
6.07
6.61
8.79
1.16
1.71
2.25
2.79
3.34
3.88
4.43
5.52
6.61
7.7
8.79
9.88
10.97
13.14
2.24
3.33
4.42
5.51
6.6
7.69
8.78
10.96
13.14
2.26
3.35
4.44
5.53
6.62
7.71
8.79
9.88
10.97
13.15
15.33
17.51
19.69
21.87
5.2
5.77
6.34
6.91
9.19
1.2
1.77
2.34
2.91
3.48
4.05
4.62
5.76
6.9
8.04
9.18
10.33
11.47
13.75
2.33
3.47
4.61
5.75
6.89
8.03
9.17
11.45
13.73
2.34
3.48
4.62
5.76
6.9
8.04
9.18
10.32
11.46
13.75
16.03
18.31
20.59
22.87
5.44
6.04
6.64
7.24
9.63
1.25
1.84
2.44
3.04
3.64
4.24
4.84
6.03
7.23
8.43
9.62
10.82
12.02
14.41
2.42
3.62
4.82
6.01
7.21
8.41
9.6
12
14.39
2.43
3.63
4.83
6.02
7.22
8.42
9.61
10.81
12.01
14.4
16.79
19.18
21.58
23.97
6.01
6.68
7.34
8
10.66
1.35
2.02
2.68
3.34
4.01
4.67
5.33
6.66
7.99
9.31
10.64
11.97
13.3
15.95
2.65
3.97
5.3
6.63
7.96
9.28
10.61
13.26
15.92
2.65
3.97
5.3
6.63
7.96
9.28
10.61
11.94
13.26
15.92
18.57
21.23
23.88
26.54
12°
12°
12°
12°
Dia. (D)
Mugen Coating Premium for hardened steel and unique new design excel in chipping prevention and resolves chattering to realize excellent finished surface. Applicable for hardened steel up to 65HRC
Unit [size : mm]
Act
ual E
ffect
ive
Inclined Angle
MRBH230Long Neck End Mill (for Hardened Steels)
MUGEN Coating Premium End Mill Series
EN
DM
ILL
201
Code No. (R)RRadius
EffectiveLength
( )Neck
Taper Angle(y°)
0.6
0.75
0.8
1
1.25
2.4468
10123468
10121416208
1216203468
1012141618202225303540101520253035
0.9
1.1
1.2
1.5
2.3
1.2
1.5
1.6
2
2.5
08-00527-0060008-00527-0060108-00527-0060208-00527-0060308-00527-0060408-00527-0060508-00527-0075008-00527-0075108-00527-0075308-00527-0075508-00527-0075708-00527-0075808-00527-0075908-00527-0076008-00527-0076208-00527-0080308-00527-0080508-00527-0080708-00527-0080908-00527-0100108-00527-0100208-00527-0100408-00527-0100608-00527-0100808-00527-0101008-00527-0101108-00527-0101208-00527-0101308-00527-0101408-00527-0101508-00527-0101608-00527-0101708-00527-0101808-00527-0101908-00527-0125208-00527-0125308-00527-0125408-00527-0125508-00527-0125608-00527-01257
ShankDia.(d)
OverallLength
(L)
1.15
1.45
1.55
1.94
2.4
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
4
4
4
4
4
45
45
50554545
5055
45
50
55
606570
904550556570
2.59
4.26
6.35
8.43
10.52
12.61
3.21
4.26
6.34
8.43
10.51
12.6
14.69
16.77
20.94
8.43
12.6
16.77
20.94
3.23
4.27
6.36
8.44
10.53
12.61
14.7
16.78
18.87
20.96
23.04
26.17
31.38
36.6
41.81
10.62
15.83
21.04
26.26
31.47
36.69
2.68
4.43
6.61
8.79
10.96
13.14
3.33
4.41
6.59
8.77
10.95
13.13
15.31
17.49
21.85
8.77
13.13
17.48
21.84
3.33
4.42
6.6
8.78
10.95
13.13
15.31
17.49
19.67
21.85
24.03
27.3
32.74
38.19
43.64
11.04
16.48
21.93
27.38
32.82
38.27
2.78
4.61
6.89
9.17
11.45
13.73
3.45
4.59
6.87
9.15
11.43
13.71
15.99
18.27
22.84
9.14
13.7
18.27
22.83
3.44
4.58
6.86
9.14
11.42
13.7
15.98
18.27
20.55
22.83
25.11
28.53
34.23
39.93
Free
11.49
17.2
22.9
28.6
Free
Free
2.89
4.81
7.2
9.59
11.99
14.38
3.58
4.78
7.17
9.56
11.96
14.35
16.74
19.14
23.92
9.55
14.34
19.13
23.91
3.56
4.76
7.15
9.54
11.94
14.33
16.72
19.12
21.51
23.9
26.3
29.89
Free
Free
Free
12
17.98
Free
Free
Free
Free
3.15
5.27
7.92
10.58
13.23
15.89
3.89
5.22
7.88
10.53
13.18
15.84
18.49
21.15
Free
10.51
15.82
21.13
Free
3.85
5.17
7.83
10.48
13.17
15.79
18.45
Free
Free
Free
Free
Free
Free
Free
Free
13.18
Free
Free
Free
Free
Free
12°
12°
12°
12°
12°
Dia. (D)
Mugen Coating Premium for hardened steel and unique new design excel in chipping prevention and resolves chattering to realize excellent finished surface. Applicable for hardened steel up to 65HRC
Unit [size : mm]
Act
ual E
ffect
ive
Inclined Angle
When you order, indicate MRBH230 (R) x ( ). ( ) is reference value.y°
MRBH230Long Neck End Mill (for Hardened Steels)
MUGEN Coating Premium End Mill Series
EN
DM
ILL
202
Code No. (R)RRadius
EffectiveLength
( )Neck
Taper Angle(y°)
1.5
2
2.5
3
68
101214162025303540101214152025303540455010152025304010152025304050
2.5
3
3.5
8
3
4
5
8
08-00527-0150108-00527-0150208-00527-0150308-00527-0150408-00527-0150508-00527-0150608-00527-0150808-00527-0150908-00527-0151008-00527-0151108-00527-0151208-00527-0200208-00527-0200308-00527-0210108-00527-0200408-00527-0200608-00527-0200808-00527-0201008-00527-0201108-00527-0201208-00527-0201308-00527-0201408-00527-0250008-00527-0250108-00527-0250208-00527-0250308-00527-0250408-00527-0250608-00527-0300008-00527-0300108-00527-0300208-00527-0300308-00527-0300408-00527-0300508-00527-03006
ShankDia.(d)
OverallLength
(L)
2.85
3.8
4.8
5.8
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
6
6
6
6
60
65
708090
65
70
808590100
70
8090
70
8090120
6.56
8.64
10.73
12.81
14.9
16.98
21.16
26.37
31.58
36.8
42.01
10.83
12.91
15
16.04
21.26
26.47
31.68
36.9
42.11
47.33
52.54
10.81
16.02
21.24
26.45
31.66
42.09
Free
Free
Free
Free
Free
Free
Free
6.78
8.96
11.14
13.32
15.5
17.68
22.04
27.48
32.93
38.38
43.83
11.22
13.4
15.58
16.67
22.12
27.57
33.01
38.46
43.91
49.36
54.8
11.18
16.63
22.08
27.52
Free
Free
Free
Free
Free
Free
Free
Free
Free
7.03
9.31
11.59
13.88
16.16
18.44
23
28.7
34.4
40.11
45.81
11.66
13.94
16.22
17.36
23.06
28.77
34.47
40.17
Free
Free
Free
11.59
17.29
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
7.31
9.7
12.09
14.49
16.88
19.27
24.06
30.04
36.03
42.01
Free
12.14
14.53
16.92
18.12
24.1
30.09
Free
Free
Free
Free
Free
12.04
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
7.95
10.6
13.26
15.91
18.57
21.22
26.53
Free
Free
Free
Free
13.25
15.91
18.56
19.89
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
12°
12°
12°
12°
Dia. (D)
Mugen Coating Premium for hardened steel and unique new design excel in chipping prevention and resolves chattering to realize excellent finished surface. Applicable for hardened steel up to 65HRC
Unit [size : mm]
Act
ual E
ffect
ive
Inclined Angle
When you order, indicate MRBH230 (R) x ( ). ( ) is reference value.y°
MRBH230Long Neck End Mill (for Hardened Steels)
MUGEN Coating Premium End Mill Series
EN
DM
ILL
203
Code No. Dia.(D)
CornorRadius.(R)
NeckTaper Angle
(y°)
Lengthof cut
( )
3
4
6
8
08-00437-0300208-00437-0300308-00437-0300508-00437-0400208-00437-0400308-00437-04005
ShankDia.(d)
OverallLength
(L)
12°
12°
6
6
60
60
0.20.30.50.20.30.5
Code No. Dia.(D)
CornorRadius.(R)
NeckTaper Angle
(y°)
Lengthof cut
( )
5
6
8
10
12
10
12
16
20
24
08-00438-0500208-00438-0500308-00438-0500508-00438-0501008-00438-0600208-00438-0600308-00438-0600508-00438-0601008-00438-0800308-00438-0800508-00438-0801008-00438-0801508-00438-1000308-00438-1000508-00438-1001008-00438-1001508-00438-1002008-00438-1200508-00438-1201008-00438-1201508-00438-12020
ShankDia.(d)
OverallLength
(L)
12°
-
-
-
-
6
6
8
10
12
60
60
65
75
80
0.20.30.51
0.20.30.51
0.30.51
1.50.30.51
1.52
0.51
1.52
Radius end mill with Mugen Coating Premium for high-hardened steel.
Radius end mill with Mugen Coating Premium for high-hardened steel.
Unit [size : mm]
Unit [size : mm]
When you order, indicate MHDH445R (D) x ( ) x (R).
When you order, indicate MHDH645R (D) x ( ) x (R).
MHDH445R4-Flute Redius End Mill for Hardened Steel
6-Flute Redius End Mill for Hardened Steel
MHDH645R
MUGEN Coating Premium End Mill Series
EN
DM
ILL
204
Mugen Coating Premium for hardened steels and unique new design exel inchipping prevention and resolves charttering to realize excellent finished surface.Total 48 sizes.
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
0.2
0.3
0.4
0.5
0.6
0.05
0.05
0.05
0.1
0.05
0.1
0.05
0.1
0.51
1.521
1.52
2.53123412341234512345246246
08-00227-0205108-00227-0205308-00227-0205508-00227-0205708-00227-0305108-00227-0305208-00227-0305308-00227-0305408-00227-0305508-00227-0405108-00227-0405308-00227-0405508-00227-0405708-00227-0410108-00227-0410308-00227-0410508-00227-0410708-00227-0505108-00227-0505208-00227-0505308-00227-0505408-00227-0505508-00227-0510108-00227-0510208-00227-0510308-00227-0510408-00227-0510508-00227-0605108-00227-0605308-00227-0605508-00227-0610108-00227-0610308-00227-06105
ShankDia.(d)
OverallLength
(L)
0.18
0.28
0.37
0.46
0.56
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
4
4
4
4
4
45
45
45
45
45
0.56
1.08
1.61
2.13
1.08
1.61
2.13
2.65
3.17
1.12
2.16
3.21
4.25
1.12
2.16
3.21
4.25
1.13
2.18
3.22
4.26
5.31
1.13
2.17
3.22
4.26
5.30
2.18
4.26
6.35
2.17
4.26
6.35
0.59
1.13
1.68
2.22
1.13
1.68
2.22
2.77
3.31
1.17
2.26
3.35
4.44
1.17
2.25
3.34
4.43
1.18
2.27
3.36
4.45
5.54
1.18
2.27
3.36
4.45
5.54
2.27
4.45
6.63
2.27
4.45
6.63
0.61
1.18
1.75
2.32
1.18
1.75
2.32
2.89
3.46
1.22
2.36
3.50
4.64
1.22
2.36
3.50
4.64
1.24
2.38
3.52
4.66
5.80
1.23
2.37
3.51
4.65
5.79
2.38
4.66
6.94
2.37
4.65
6.93
0.64
1.24
1.84
2.43
1.24
1.84
2.43
3.03
3.63
1.28
2.48
3.67
4.87
1.27
2.47
3.66
4.86
1.29
2.49
3.69
4.88
6.08
1.28
2.48
3.68
4.87
6.07
2.49
4.88
7.28
2.48
4.87
7.27
0.71
1.37
2.03
2.70
1.37
2.03
2.70
3.36
4.02
1.42
2.74
4.07
5.40
1.40
2.73
4.05
5.38
1.43
2.76
4.09
5.41
6.74
1.42
2.74
4.07
5.40
6.72
2.76
5.14
8.07
2.74
5.40
8.05
CornerRadius
(R)
12°
12°
12°
12°
12°
0.15
0.25
0.3
0.4
0.5
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
When you order, indicate MHRH230R(D) x (R) x ( ).(y) is reference value
MHRH230R2-Flute Long Neck Radius End Mill for Hardened Steels
MUGEN Coating Premium End Mill Series
EN
DM
ILL
205
Mugen Coating Premium for hardened steels and unique new design exel inchipping prevention and resolves charttering to realize excellent finished surface.Total 48 sizes.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
0.7
0.8
0.9
0.05
0.1
0.05
0.1
0.2
0.1
464646846846848
08-00227-0205108-00227-0205308-00227-0205508-00227-0205708-00227-0305108-00227-0305208-00227-0305308-00227-0305408-00227-0305508-00227-0405108-00227-0405308-00227-0405508-00227-0405708-00227-0410108-00227-04105
ShankDia.(d)
OverallLength
(L)
0.66
0.76
0.85
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
4
4
4
45
45
5045
5045
504550
4.26
6.35
4.26
6.35
4.27
6.36
8.45
4.27
6.36
8.44
4.27
6.35
8.44
4.28
8.46
4.45
6.63
4.45
6.63
4.46
6.64
8.82
4.46
6.64
8.82
4.45
6.63
8.81
4.47
8.83
4.66
6.94
4.65
6.93
4.67
6.95
9.23
4.66
6.94
9.23
4.65
6.93
9.21
4.68
9.24
4.88
7.28
4.87
7.27
4.90
7.29
9.68
4.89
7.28
9.68
4.87
7.26
9.66
4.90
9.69
5.41
8.07
5.40
8.05
5.43
8.08
10.74
5.41
8.07
10.72
5.38
8.04
10.69
5.43
10.74
CornerRadius
(R)
12°
12°
12°
0.55
0.65
0.7
When you order, indicate MHRH230R(D) x (R) x ( ).(y) is reference value
MHRH230R2-Flute Long Neck Radius End Mill for Hardened Steels
MUGEN Coating Premium End Mill Series
EN
DM
ILL
206
Mugen Coating Premium for hardened steels and unique new design exel inchipping prevention and resolves charttering to realize excellent finished surface.4 flutes end mill for higher efficiency.Total 147 sizes.
When you order, indicate MHRH430R(D) x (R) x ( ).(y) is reference value
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
1
1.2
1.5
0.8
1
1.2
0.95
1.14
1.43
4
4
4
50
50
50
60
0.05
0.1
0.2
0.3
0.1
0.2
0.3
0.1
34568
1034568
1034568
1034568
105
105
105
10468
1215
08-00237-1005008-00237-1005108-00237-1005208-00237-1005308-00237-1005508-00237-1005708-00237-1010008-00237-1010108-00237-1010208-00237-1010308-00237-1010508-00237-1010708-00237-1020008-00237-1020108-00237-1020208-00237-1020308-00237-1020508-00237-1020708-00237-1030008-00237-1030108-00237-1030208-00237-1030308-00237-1030508-00237-1030708-00237-1210108-00237-1210308-00237-1220108-00237-1220308-00237-1230108-00237-1230308-00237-1510108-00237-1510308-00237-1510508-00237-1510708-00237-15109
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d2)Lengh of
Cut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
3.264.305.346.388.4710.563.254.305.346.388.4710.553.254.295.346.388.4610.553.254.295.336.378.4610.555.3610.585.3610.575.3610.574.356.438.5212.6915.82
3.44.495.586.678.8511.033.4
4.485.576.668.8411.023.394.485.576.668.8311.013.384.475.566.658.83115.6
11.055.5911.045.5811.034.546.728.8913.2516.52
3.564.7
5.846.989.2611.543.554.695.836.979.2511.533.544.685.826.969.2411.523.524.665.8
6.949.2211.515.8611.565.8411.555.8311.534.747.039.3113.8717.29
3.734.936.127.329.7112.113.724.926.117.319.712.13.74.96.097.299.6812.083.684.886.077.279.6612.066.1412.126.1212.116.1
12.094.977.379.7614.5518.14
4.135.466.798.11
10.7713.424.125.446.778.1010.7513.414.085.416.748.0710.7213.384.055.386.718.0310.6913.34
6.813.446.7713.416.7413.375.518.1610.8216.1220.11
CornerRadius
(R)
12°
12°
12°
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
MHRH430R4-Flute Long Neck Radius End Mill for Hardened Steels
MUGEN Coating Premium End Mill Series
EN
DM
ILL
207
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
1.5
2
1.2
1.6
4
4
1.43
1.91
50
60
50
60
50
60
50
60
50
60
50
60
50
60
0.2
0.3
0.5
0.1
0.2
0.3
0.5
468
1215468
1215468
121568
12162068
12162068
12162068
121620
08-00237-1520108-00237-1520308-00237-1520508-00237-1520708-00237-1520908-00237-1530108-00237-1530308-00237-1530508-00237-1530708-00237-1530908-00237-1550108-00237-1550308-00237-1550508-00237-1550708-00237-1550908-00237-2010108-00237-2010308-00237-2010508-00237-2010708-00237-2010908-00237-2020108-00237-2020308-00237-2020508-00237-2020708-00237-2020908-00237-2030108-00237-2030308-00237-2030508-00237-2030708-00237-2030908-00237-2050108-00237-2050308-00237-2050508-00237-2050708-00237-20509
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d2)Lengh of
Cut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
4.34
6.43
8.51
12.68
15.81
4.34
6.42
8.51
12.68
15.81
4.33
6.41
8.5
12.67
15.8
6.47
8.55
12.73
16.90
21.07
6.46
8.55
12.72
16.89
21.06
6.46
8.55
12.72
16.89
21.06
6.45
8.54
12.71
16.88
21.05
4.53
6.71
8.89
13.24
16.51
4.52
6.7
8.88
13.23
16.5
4.5
6.68
8.86
13.22
16.48
6.75
8.93
13.29
17.65
22.01
6.74
8.92
13.28
17.64
22
6.74
8.91
13.27
17.63
21.99
6.72
8.9
13.25
17.61
21.97
4.73
7.01
9.29
13.85
17.28
4.72
7
9.28
13.84
17.26
4.69
6.97
9.25
13.81
17.23
7.07
9.35
13.91
18.47
23.03
7.05
9.33
13.89
18.46
23.02
7.04
9.32
13.88
18.44
23
7.01
9.29
13.85
18.42
22.98
4.95
7.35
9.74
14.53
18.12
4.93
7.33
9.72
14.51
18.1
4.9
7.29
9.68
14.47
18.06
7.41
9.8
14.59
19.37
24.16
7.39
9.78
14.57
19.36
24.14
7.37
9.76
14.55
19.34
24.12
7.33
9.72
14.51
19.3
24.08
5.47
8.13
10.78
16.09
20.07
5.44
8.1
10.75
16.06
20.04
5.38
8.03
10.69
16
19.98
8.21
10.86
16.17
FREE
FREE
8.18
10.83
16.14
FREE
FREE
8.14
10.80
16.11
FREE
FREE
8.08
10.73
16.04
FREE
FREE
CornerRadius
(R)
12°
12°
When you order, indicate MHRH430R(D) x (R) x ( ).(y) is reference value
Mugen Coating Premium for hardened steels and unique new design exel inchipping prevention and resolves charttering to realize excellent finished surface.4 flutes end mill for higher efficiency.Total 147 sizes.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
MHRH430R4-Flute Long Neck Radius End Mill for Hardened Steels
MUGEN Coating Premium End Mill Series
EN
DM
ILL
208
3 2.5 62.85
50
60
70
50
60
70
50
60
70
0.1
0.2
0.3
812162025308
12162025308
1216202530
08-00237-3010108-00237-3010308-00237-3010508-00237-3010708-00237-3010908-00237-3011108-00237-3020108-00237-3020308-00237-3020508-00237-3020708-00237-3020908-00237-3021108-00237-3030108-00237-3030308-00237-3030508-00237-3030708-00237-3030908-00237-30311
8.7
12.87
17.04
21.21
26.43
31.64
8.70
12.87
17.04
21.21
26.42
31.64
8.69
12.86
17.04
21.21
26.42
31.63
9.09
13.44
17.8
22.16
27.61
33.05
9.08
13.44
17.79
22.15
27.6
33.05
9.07
13.43
17.78
22.14
27.59
33.04
9.51
14.07
18.63
23.19
28.9
34.6
9.49
14.06
18.62
23.18
28.88
34.58
9.48
14.04
18.6
23.17
28.87
34.57
9.97
14.76
19.54
24.33
30.31
36.3
9.95
14.74
19.52
24.31
30.29
36.28
9.93
14.72
19.5
24.29
30.27
36.26
11.05
16.36
21.67
26.98
FREE
FREE
11.02
16.33
21.64
26.94
FREE
FREE
10.99
16.29
21.6
26.91
FREE
FREE
12°
When you order, indicate MHRH430R(D) x (R) x ( ).(y) is reference value
2.5 2 42.39
50
60
70
50
60
70
50
60
70
50
60
70
0.1
0.2
0.3
0.5
102030102030102030102030
08-00237-2510108-00237-2510308-00237-2510508-00237-2520108-00237-2520308-00237-2520508-00237-2530108-00237-2530308-00237-2530508-00237-2550108-00237-2550308-00237-25505
10.69
21.12
31.55
10.68
21.11
31.54
10.68
21.11
31.54
10.67
21.1
31.53
11.16
22.06
32.95
11.15
22.05
32.94
11.14
22.04
32.93
11.13
22.02
32.92
11.68
23.09
FREE
11.67
23.07
FREE
11.65
23.06
FREE
11.63
23.03
FREE
12.25
FREE
FREE
12.23
FREE
FREE
12.21
FREE
FREE
12.17
FREE
FREE
13.58
FREE
FREE
13.55
FREE
FREE
13.52
FREE
FREE
13.45
FREE
FREE
12°
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d2)Lengh of
Cut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
CornerRadius
(R)
Mugen Coating Premium for hardened steels and unique new design exel inchipping prevention and resolves charttering to realize excellent finished surface.4 flutes end mill for higher efficiency.Total 147 sizes.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
50
60
70
0.5
81216202530
08-00237-3050108-00237-3050308-00237-3050508-00237-3050708-00237-3050908-00237-30511
8.68
12.86
17.03
21.2
26.41
31.63
9.05
13.41
17.77
22.12
27.57
33.02
9.45
14.01
18.58
23.14
28.84
34.54
9.89
14.68
19.47
24.25
30.24
36.22
10.92
16.23
21.54
26.85
FREE
FREE
MHRH430R4-Flute Long Neck Radius End Mill for Hardened Steels
MUGEN Coating Premium End Mill Series
EN
DM
ILL
209
5
6
4
4
6
6
4.75
5.7
0.1
0.2
0.3
0.5
1
0.1
0.2
0.3
0.5
1
2040204020402040204024482448244824482448
70
90
70
90
70
90
70
90
70
90
90
110
90
110
90
110
90
110
90
110
08-00237-5010108-00237-5010308-00237-5020108-00237-5020308-00237-5030108-00237-5030308-00237-5050108-00237-5050308-00237-5100108-00237-5100308-00237-6010108-00237-6010308-00237-6020108-00237-6020308-00237-6030108-00237-6030308-00237-6050108-00237-6050308-00237-6100108-00237-61003
21.46
42.32
21.46
42.31
21.45
42.31
21.44
42.3
21.42
42.28
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
22.42
FREE
22.41
FREE
22.4
FREE
22.38
FREE
22.34
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
12°
-
When you order, indicate MHRH430R(D) x (R) x ( ).(y) is reference value
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
3
4
2.5
3.2
6
6
2.85
3.8
50
60
70
60
70
60
70
60
70
70
60
70
60
70
1
0.1
0.2
0.3
0.5
1
81216202530162432162432162432162432162432
08-00237-3100108-00237-3100308-00237-3100508-00237-3100708-00237-3100908-00237-3101108-00237-4010108-00237-4010308-00237-4010508-00237-4020108-00237-4020308-00237-4020508-00237-4030108-00237-4030308-00237-4030508-00237-4050108-00237-4050308-00237-4050508-00237-4100108-00237-4100308-00237-41005
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d2)Lengh of
Cut( )
Actual effective length dependingon inclined angle of workipiece.30' 1° 1°30' 2° 3°
8.66
12.83
17.01
21.18
26.39
31.6
17.17
25.51
33.85
17.16
25.50
33.85
17.16
25.50
33.84
17.15
25.49
33.83
17.13
25.47
33.81
9.01
13.36
17.72
22.08
27.53
32.97
17.93
26.65
35.36
17.92
26.64
35.35
17.91
26.63
35.34
17.89
26.61
35.33
17.85
26.57
35.28
9.38
13.94
18.51
23.07
28.77
34.47
18.77
27.89
37.01
18.75
27.88
37.00
18.74
27.86
36.99
18.71
27.83
36.96
18.64
27.77
36.89
9.80
14.58
19.37
24.16
30.14
36.12
19.68
29.26
FREE
19.66
29.24
FREE
19.65
29.22
FREE
19.61
29.18
FREE
19.51
29.08
FREE
10.76
16.07
21.38
26.69
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
CornerRadius
(R)
12°
12°
Mugen Coating Premium for hardened steels and unique new design exel inchipping prevention and resolves charttering to realize excellent finished surface.4 flutes end mill for higher efficiency.Total 147 sizes.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
MHRH430R4-Flute Long Neck Radius End Mill for Hardened Steels
MUGEN Coating Premium End Mill Series
EN
DM
ILL
210
Code No. Dia.(D)
NeckTaper Angle
(y°)
FluteLength
( )1.21.21.41.41.41.81.81.82.12.12.42.42.62.62.6333
3.33.3555555555566666666666
0.10.110.120.130.140.150.160.170.180.190.2
0.210.220.230.240.250.260.270.280.290.3
0.310.320.330.340.350.360.370.380.390.4
0.410.420.430.440.450.460.470.480.490.5
04-00200-0010004-00200-0011004-00200-0012004-00200-0013004-00200-0014004-00200-0015004-00200-0016004-00200-0017004-00200-0018004-00200-0019004-00200-0020004-00200-0021004-00200-0022004-00200-0023004-00200-0024004-00200-0025004-00200-0026004-00200-0027004-00200-0028004-00200-0029004-00200-0030004-00200-0031004-00200-0032004-00200-0033004-00200-0034004-00200-0035004-00200-0036004-00200-0037004-00200-0038004-00200-0039004-00200-0040004-00200-0041004-00200-0042004-00200-0043004-00200-0044004-00200-0045004-00200-0046004-00200-0047004-00200-0048004-00200-0049004-00200-00500
ShankDia.(d)
OverallLength
(L)
15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°
33333333333333333333333333333333333333333
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
Unit [size : mm]
When you order, indicate MDR-R (D).( ) is reference value.
Stable and long-life drill realized by Mugen-coatingHigh accuracy suitable for precision machining. Tolerance of diameter : 0-0.005mm.
Code No. Dia.(D)
NeckTaper Angle
(y°)
FluteLength
( )66666666677777777778888888888888888888888
0.510.520.530.540.550.560.570.580.590.60.610.520.630.640.650.660.670.680.690.70.710.720.730.740.750.760.770.780.790.80.810.820.830.840.850.860.870.880.890.90.91
04-00200-0051004-00200-0052004-00200-0053004-00200-0054004-00200-0055004-00200-0056004-00200-0057004-00200-0058004-00200-0059004-00200-0060004-00200-0061004-00200-0062004-00200-0063004-00200-0064004-00200-0065004-00200-0066004-00200-0067004-00200-0068004-00200-0069004-00200-0070004-00200-0071004-00200-0072004-00200-0073004-00200-0074004-00200-0075004-00200-0076004-00200-0077004-00200-0078004-00200-0079004-00200-0080004-00200-0081004-00200-0082004-00200-0083004-00200-0084004-00200-0085004-00200-0086004-00200-0087004-00200-0088004-00200-0089004-00200-0090004-00200-00910
ShankDia.(d)
OverallLength
(L)
15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°
33333333333333333333333333333333333333333
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
MDR-RMUGEN-COATING Miniature Drill
MUGEN Coating Endmill Series
EN
DM
ILL
211
Unit [size : mm]
When you order, indicate MDR-R (D).( ) is reference value.
Stable and long-life drill realized by Mugen-coatingHigh accuracy suitable for precision machining. Tolerance of diameter : 0-0.005mm.
Code No. Dia.(D)
NeckTaper Angle
(y°)
FluteLength
( )88888888
10
0.920.930.940.950.960.970.980.99
1
04-00200-0092004-00200-0093004-00200-0094004-00200-0095004-00200-0096004-00200-0097004-00200-0098004-00200-0099004-00200-01000
ShankDia.(d)
OverallLength
(L)
15°15°15°15°15°15°15°15°15°
333333333
38
38
38
38
38
38
38
38
38
Design short length of cut and helix 25° to increase rigidity realizeshigh efficient machining, and resolves chattering and minimizes deflection of work material.
When you order, indicate MX225 (D).
Unit [size : mm]
Code No. Dia.(D)
NeckTaper Angle
(y°)
FluteLength
( )0.30.40.50.81
1.21.51.82
2.534567891012
0.30.40.50.81
1.21.51.82
2.534567891012
08-00025-0003008-00025-0004008-00025-0005008-00025-0008008-00025-0010008-00025-0012008-00025-0015008-00025-0018008-00025-0020008-00025-0025008-00025-0030008-00025-0040008-00025-0050008-00025-0060008-00025-0070008-00025-0080008-00025-0090008-00025-0100008-00025-01200
ShankDia.(d)
OverallLength
(L)
12°12°12°12°12°12°12°12°12°12°12°12°12°–
12°–
12°––
4444444444666688101012
45454545454545454545454550506565757580
MDR-RMUGEN-COATING Miniature Drill
MX225MUGEN-COATING 2-Flute LEAD25 End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
212
Code No. Dia(D)
Lengthof Cut
( )
NeckTaper Angle
(y°)
0.10.20.30.40.50.60.70.80.91
1.11.21.31.41.51.61.71.81.92
2.12.22.32.42.52.62.72.82.93
0.20.40.60.81
1.21.41.61.82
2.22.42.62.83
3.23.43.63.84
4.24.44.64.85
5.25.45.65.86
12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°
444444444444444444444444444446
08-00030-0001008-00030-0002008-00030-0003008-00030-0004008-00030-0005008-00030-0006008-00030-0007008-00030-0008008-00030-0009008-00030-0010008-00030-0011008-00030-0012008-00030-0013008-00030-0014008-00030-0015008-00030-0016008-00030-0017008-00030-0018008-00030-0019008-00030-0020008-00030-0021008-00030-0022008-00030-0023008-00030-0024008-00030-0025008-00030-0026008-00030-0027008-00030-0028008-00030-0029008-00030-00300
ShankDia.(d)
OverallLength
(L)
454545454545454545454545454545454545454545454545454545454545
Code No. Dia(D)
Lengthof Cut
( )
NeckTaper Angle
(y°)
3.13.23.33.43.53.63.73.83.94
4.14.24.34.44.54.64.74.84.95
5.15.25.35.45.55.65.75.85.967891012
6.26.46.66.87
7.27.47.67.88
8.28.48.68.89
9.29.49.69.810
10.210.410.610.811
11.211.411.611.8121416182024
12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°–
12°–
12°––
66666666666666666666666666666688101012
08-00030-0031008-00030-0032008-00030-0033008-00030-0034008-00030-0035008-00030-0036008-00030-0037008-00030-0038008-00030-0039008-00030-0040008-00030-0041008-00030-0042008-00030-0043008-00030-0044008-00030-0045008-00030-0046008-00030-0047008-00030-0048008-00030-0049008-00030-0050008-00030-0051008-00030-0052008-00030-0053008-00030-0054008-00030-0055008-00030-0056008-00030-0057008-00030-0058008-00030-0059008-00030-0060008-00030-0070008-00030-0080008-00030-0090008-00030-0100008-00030-01200
ShankDia.(d)
OverallLength
(L)
4545454545454545454545454545505050505050505050505050505050506565757580
Applicable to both slotting and side milling.Unit [size : mm]
When you order, indicate MX230 (D).
MX230MUGEN-COATING 2-Flute LEAD30 End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
213
Available for appropriate length of cut for the machining.
Code No. Dia(D)
Lengthof Cut
( )
NeckTaper Angle
(y°)
0.10.20.30.40.50.60.70.80.91
1.11.21.31.41.51.61.71.81.92
2.12.22.32.42.52.62.72.82.93
0.30.60.91.21.51.82.12.42.73
3.33.63.94.24.54.85.15.45.76
6.36.66.97.27.57.88.18.48.79
12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°
444444444444444444444444444446
08-00035-0001008-00035-0002008-00035-0003008-00035-0004008-00035-0005008-00035-0006008-00035-0007008-00035-0008008-00035-0009008-00035-0010008-00035-0011008-00035-0012008-00035-0013008-00035-0014008-00035-0015008-00035-0016008-00035-0017008-00035-0018008-00035-0019008-00035-0020008-00035-0021008-00035-0022008-00035-0023008-00035-0024008-00035-0025008-00035-0026008-00035-0027008-00035-0028008-00035-0029008-00035-00300
ShankDia.(d)
OverallLength
(L)
454545454545454545454545454545454545454545454545454545454545
Code No. Dia(D)
Lengthof Cut
( )
NeckTaper Angle
(y°)
3.13.23.33.43.53.63.73.83.94
4.14.24.34.44.54.64.74.84.95
5.15.25.35.45.55.65.75.85.967891012
9.39.69.910.210.510.811.111.411.712
12.312.612.913.213.513.814.114.414.715
15.315.615.916.216.516.817.117.417.7182124273036
12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°–
12° –
12°– –
66666666666666666666666666666688
101012
08-00035-0031008-00035-0032008-00035-0033008-00035-0034008-00035-0035008-00035-0036008-00035-0037008-00035-0038008-00035-0039008-00035-0040008-00035-0041008-00035-0042008-00035-0043008-00035-0044008-00035-0045008-00035-0046008-00035-0047008-00035-0048008-00035-0049008-00035-0050008-00035-0051008-00035-0052008-00035-0053008-00035-0054008-00035-0055008-00035-0056008-00035-0057008-00035-0058008-00035-0059008-00035-0060008-00035-0070008-00035-0080008-00035-0090008-00035-0100008-00035-01200
ShankDia.(d)
OverallLength
(L)
4545454545454545455050505050505555555555555555556060606060606565757580
Unit [size : mm]
When you order, indicate MX235 (D).
MX235MUGEN-COATING 2-Flute LEAD35 End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
214
Code No. Dia(D)
Lengthof Cut
( )
NeckTaper Angle
(y°)
0.30.40.50.60.70.80.91
1.11.21.31.41.51.61.71.81.92
2.12.22.32.42.52.62.72.82.93
3.13.2
1.21.62
2.42.83.23.64
4.44.85.25.66
6.46.87.27.68
8.48.89.29.610
10.410.811.211.612
12.412.8
12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°
444444444444444444444444444666
08-00040-0003008-00040-0004008-00040-0005008-00040-0006008-00040-0007008-00040-0008008-00040-0009008-00040-0010008-00040-0011008-00040-0012008-00040-0013008-00040-0014008-00040-0015008-00040-0016008-00040-0017008-00040-0018008-00040-0019008-00040-0020008-00040-0021008-00040-0022008-00040-0023008-00040-0024008-00040-0025008-00040-0026008-00040-0027008-00040-0028008-00040-0029008-00040-0030008-00040-0031008-00040-00320
ShankDia.(d)
OverallLength
(L)
454545454545454545454545454545454545454545454550505050505050
Code No. Dia(D)
Lengthof Cut
( )
NeckTaper Angle
(y°)
3.33.43.53.63.73.83.94
4.14.24.34.44.54.64.74.84.95
5.15.25.35.45.55.65.75.85.967891012
13.213.614
14.414.815.215.616
16.416.817.217.618
18.418.819.219.620
20.420.821.221.622
22.422.823.223.6242832364048
12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°–
12°–
12°– –
666666666666666666666666666688101012
08-00040-0033008-00040-0034008-00040-0035008-00040-0036008-00040-0037008-00040-0038008-00040-0039008-00040-0040008-00040-0041008-00040-0042008-00040-0043008-00040-0044008-00040-0045008-00040-0046008-00040-0047008-00040-0048008-00040-0049008-00040-0050008-00040-0051008-00040-0052008-00040-0053008-00040-0054008-00040-0055008-00040-0056008-00040-0057008-00040-0058008-00040-0059008-00040-0060008-00040-0070008-00040-0080008-00040-0090008-00040-0100008-00040-01200
ShankDia.(d)
OverallLength
(L)
505050505050505555555555555555555560606060606565656565659090100100105
MX240 with length of cut 4 times the diameter is suitable for deepmachining with minmum deflection of cutting up-right surface.
Unit [size : mm]
When you order, indicate MX240 (D).
MX240MUGEN-COATING 2-Flute LEAD40 End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
215
MX245 with length of cut of 5 times the diameter is suitable for deep ,machining withminimum deflection of cutting up-right surface.
Code No.Effective Length
( )
NeckTaper Angle
(y°)
0.30.40.50.81
1.21.51.82
2.53456789
1012
1.52
2.5456
7.59
1012.5152025303540455060
12°12°12°12°12°12°12°12°12°12°12°12°12°– 12°– 12°– –
4444444444666688101012
08-00045-0003008-00045-0004008-00045-0005008-00045-0008008-00045-0010008-00045-0012008-00045-0015008-00045-0018008-00045-0020008-00045-0025008-00045-0030008-00045-0040008-00045-0050008-00045-0060008-00045-0070008-00045-0080008-00045-0090008-00045-0100008-00045-01200
Shank Dia.(d)
Overall Length(L)
45454545454545505050556065759090100100105
Dia (D)
When you order, indicate MX245 (D).
Unit [size : mm]
MX245MUGEN-COATING 2-Flute LEAD45 End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
216
Code No. Dia.(D)
NeckTaper Angle
(y°)
Lengthof cut
( )1
1.52
2.53
3.54
4.55
5.568
1012
11.52
2.53
3.54
4.55
5.568
1012
08-00075-0010008-00075-0015008-00075-0020008-00075-0025008-00075-0030008-00075-0035008-00075-0040008-00075-0045008-00075-0050008-00075-0055008-00075-0060008-00075-0080008-00075-0100008-00075-01200
ShankDia.(d)
OverallLength
(L)
12°12°12°12°12°12°12°12°12°12° - - - -
4444666666681012
45
45
45
45
45
45
45
50
50
50
50
65
75
80
Code No. Dia.(D)
NeckTaper Angle
(y°)
Lengthof cut
( )23456789101112162024
11.52
2.53
3.54
4.55
5.5681012
08-00080-0010008-00080-0015008-00080-0020008-00080-0025008-00080-0030008-00080-0035008-00080-0040008-00080-0045008-00080-0050008-00080-0055008-00080-0060008-00080-0080008-00080-0100008-00080-01200
ShankDia.(d)
OverallLength
(L)
12°12°12°12°12°12°12°12°12°12° - - - -
4444666666681012
45
45
45
45
45
45
45
50
50
50
50
65
75
80
When you order, indicate MX425 (D). When you order, indicate MX430 (D).
Unit [size : mm]
Design of short length of cut and helix 25 to increase rigidity realizes high efficient machining,and resolves chattering and minimizes deflection of work material.
Applicable to any milling process.The length of cut is double dia, and helix angle is 30.
Unit [size : mm]
MX425 MX430MUGEN-COATING 4-Flute LEAD25 End Mill MUGEN-COATING 4-Flute LEAD30 End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
217
Code No. Dia.(D)
NeckTaper Angle
(y°)
Lengthof cut
( )3
4.56
7.59
10.512
13.515
16.518243036
11.52
2.53
3.54
4.55
5.568
1012
08-00085-0010008-00085-0015008-00085-0020008-00085-0025008-00085-0030008-00085-0035008-00085-0040008-00085-0045008-00085-0050008-00085-0055008-00085-0060008-00085-0080008-00085-0100008-00085-01200
ShankDia.(d)
OverallLength
(L)
12°12°12°12°12°12°12°12°12°12° - - - -
4444666666681012
45
45
45
45
45
45
45
50
50
50
50
65
75
80
Code No. Dia.(D)
NeckTaper Angle
(y°)
Lengthof cut
( )4681012141618202224324048
11.52
2.53
3.54
4.55
5.5681012
08-00090-0010008-00090-0015008-00090-0020008-00090-0025008-00090-0030008-00090-0035008-00090-0040008-00090-0045008-00090-0050008-00090-0055008-00090-0060008-00090-0080008-00090-0100008-00090-01200
ShankDia.(d)
OverallLength
(L)
12°12°12°12°12°12°12°12°12°12° - - - -
4444666666681012
45
45
45
45
45
45
45
50
50
50
50
65
75
80
When you order, indicate MX435 (D). When you order, indicate MX440 (D).
Available for appropriate length of cut for the machining.The length of cut is three times dia, and helix angle is 35.
MX440 with length of cut of 4 times the diameter is suitable fordeep machining with minimum deflection of cutting up-right surface.
Unit [size : mm]Unit [size : mm]
MX435 MX440MUGEN-COATING 4-Flute LEAD35 End Mill MUGEN-COATING 4-Flute LEAD40 End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
218
Code No. Dia.(D)
NeckTaper Angle
(y°)
Lengthof cut
( )
57.510
12.515
17.520
22.525
27.530405060
11.52
2.53
3.54
4.55
5.568
1012
08-00095-0010008-00095-0015008-00095-0020008-00095-0025008-00095-0030008-00095-0035008-00095-0040008-00095-0045008-00095-0050008-00095-0055008-00095-0060008-00095-0080008-00095-0100008-00095-01200
ShankDia.(d)
OverallLength
(L)
12°12°12°12°12°12°12°12°12°12° - - - -
4444666666681012
45
45
50
50
55
60
60
65
65
75
75
90
100
105
When you order, indicate MX445 (D).
MX445 with length of cut of 5 times the diameter is suitable fordeep machining with minimum deflection of cutting up-right surface.
Unit [size : mm]
Code No. Dia(D)
Lengthof Cut
( )
NeckTaper Angle
(y°)
0.10.150.20.250.30.350.40.450.50.550.60.650.70.750.80.850.90.95
11.051.11.151.21.251.31.35
0.150.20.40.50.60.70.80.91.251.31.51.51.81.82222
2.52.52.52.53333
9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9° 9°
44444444444444444444444444
08-00100-0001008-00100-0001508-00100-0002008-00100-0002508-00100-0003008-00100-0003508-00100-0004008-00100-0004508-00100-0005008-00100-0005508-00100-0006008-00100-0006508-00100-0007008-00100-0007508-00100-0008008-00100-0008508-00100-0009008-00100-0009508-00100-0010008-00100-0010508-00100-0011008-00100-0011508-00100-0012008-00100-0012508-00100-0013008-00100-00135
ShankDia.(d)
OverallLength
(L)
4545454545454545454545454545454545454545454545454545
Unit [size : mm]
When you order, indicate MSE230P (D).
08-00100-0014008-00100-0014508-00100-0015008-00100-0015508-00100-0016008-00100-0016508-00100-0017008-00100-0017508-00100-0018008-00100-0018508-00100-0019008-00100-00195
1.41.451.51.551.61.651.71.751.81.851.91.95
3.53.54444
4.54.54.54.555
9°9°9°9°9°9°9°9°9°9°9°9°
444444444444
454545454545454545454545
Our original MUGEN-COATING has been put on 2-flute end mill.It covers all-round cutting from roughing to finishing.
MX445MUGEN-COATING 4-Flute LEAD45 End Mill
MSE230MUGEN-COATING 2-Flute End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
219
Code No. Dia(D)
Lengthof Cut
( )
NeckTaper Angle
(y°)
4.84.95
5.15.25.35.45.55.65.75.85.96
6.57
7.58
8.59
9.510
10.511
11.512
12131313131414141415151515171819202223242527282930
9°9°9°9°9°9°9°9°9°9°9°9°– 9°9°9°– 9°9°9°– 9°9°9°–
666666666666688881010101012121212
08-00100-0048008-00100-0049008-00100-0050008-00100-0051008-00100-0052008-00100-0053008-00100-0054008-00100-0055008-00100-0056008-00100-0057008-00100-0058008-00100-0059008-00100-0060008-00100-0065008-00100-0070008-00100-0075008-00100-0080008-00100-0085008-00100-0090008-00100-0095008-00100-0100008-00100-0105008-00100-0110008-00100-0115008-00100-01200
ShankDia.(d)
OverallLength
(L)
55555555555555555555555555606565657070757580808080
Unit [size : mm]
When you order, indicate MSE230P (D).
Code No. Dia(D)
Lengthof Cut
( )
NeckTaper Angle
(y°)
22.052.1
2.152.2
2.252.3
2.352.4
2.452.5
2.552.6
2.652.7
2.752.8
2.852.9
2.953
3.13.23.33.43.53.63.73.83.94
4.14.24.34.44.54.64.7
55
5.55.55.55.5666677777778888889999
1010101011111111121212
9°9°9°9°9°9°9°9°9°9°9°9°9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9°
44444444444444444464666666666666666666
08-00100-0020008-00100-0020508-00100-0021008-00100-0021508-00100-0022008-00100-0022508-00100-0023008-00100-0023508-00100-0024008-00100-0024508-00100-0025008-00100-0025508-00100-0026008-00100-0026508-00100-0027008-00100-0027508-00100-0028008-00100-0028508-00100-0029008-00100-0029508-00100-0030008-00100-0031008-00100-0032008-00100-0033008-00100-0034008-00100-0035008-00100-0036008-00100-0037008-00100-0038008-00100-0039008-00100-0040008-00100-0041008-00100-0042008-00100-0043008-00100-0044008-00100-0045008-00100-0046008-00100-00470
ShankDia.(d)
OverallLength
(L)
4545454545454545454545454545454545505050505050505050505050505050505050555555
Our original MUGEN-COATING has been put on 2-flute end mill.It covers all-round cutting from roughing to finishing.
MSE230MUGEN-COATING 2-Flute End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
220
Code No. Dia(D)
Lengthof Cut
( )
NeckTaper Angle
(y°)
11.52
2.53
3.54
4.55
5.56
6.57
7.58
8.59
9.510121415161820
2.545789
10121314151718192022232425303540404550
9°9°9°9°9°9°9°9°9°9°- 9°9°9°- 9°9°9°- - - 9°- - -
444466666668888
10101010121216161620
08-00110-0010008-00110-0015008-00110-0020008-00110-0025008-00110-0030008-00110-0035008-00110-0040008-00110-0045008-00110-0050008-00110-0055008-00110-0060008-00110-0065008-00110-0070008-00110-0075008-00110-0080008-00110-0085008-00110-0090008-00110-0095008-00110-0100008-00110-0120008-00110-0140008-00110-0150008-00110-0160008-00110-0180008-00110-02000
ShankDia.(d)
OverallLength
(L)
4545454550505055555555606565657070757580100110110120135
Unit [size : mm]
When you order, indicate MSE430 (D).
Code No. Dia(D)
Lengthof Cut
( )
NeckTaper Angle
(y°)
0.50.60.81
1.52
2.534568
1012
22.43.2468
1012162024324048
9°9°9°9°9°9°9°9°9°9°- - - -
444444466668
1012
08-00101-0005008-00101-0006008-00101-0008008-00101-0010008-00101-0015008-00101-0020008-00101-0025008-00101-0030008-00101-0040008-00101-0050008-00101-0060008-00101-0080008-00101-0100008-00101-01200
ShankDia.(d)
OverallLength
(L)
505050505050505560657590100110
It can be cut the depth of four times the dia.
Unit [size : mm]
When you order, indicate MSEM230 (D).
Our original MUGEN-COATING has been put on 4-flute end mill.It can be cut from non-hardened materials to hardened materials.
MSEM230MUGEN-COATING 2-Flute Medium End Mill
MSE430MUGEN-COATING 4-Flute End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
221
Unit [size : mm]
Code No. Dia(D)
Lengthof Cut
( )
NeckTaper Angle
(y°)
11.52
2.534568
10121620
468
10121620243240486480
9°9°9°9°9°9°9°- - - - - -
444466668
10121620
08-00111-0010008-00111-0015008-00111-0020008-00111-0025008-00111-0030008-00111-0040008-00111-0050008-00111-0060008-00111-0080008-00111-0100008-00111-0120008-00111-0160008-00111-02000
ShankDia.(d)
OverallLength
(L)
505050505560657590
100110130140
Unit [size : mm]
When you order, indicate MSEM430 (D).
It is very suitable for finishing side milling on the depth of four times the dia.
Code No. Dia.(D)
NeckTaper Angle
(y°)
Lengthof cut
( )81013152025304050
3456810121620
08-00130-0030008-00130-0040008-00130-0050008-00130-0060008-00130-0080008-00130-0100008-00130-0120008-00130-0160008-00130-02000
ShankDia.(d)
OverallLength
(L)
9°9°9° - - - - - -
6666810121620
50
50
55
55
65
75
80
110
135
When you order, indicate MSE345 (D).
Our original MUGEN-COATING has been put on 3-flute end mill.Compared with 30 helix angle, it can be reduced cutting resistance
MSEM430MUGEN-COATING 4-Flute Medium End Mill
MSE345MUGEN-COATING 3-Flute End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
222
Code No. Dia.(D)
NeckTaper Angle
(y°)
Lengthof cut
( )578
1013152025304050
22.534568
10121620
08-00140-0020008-00140-0025008-00140-0030008-00140-0040008-00140-0050008-00140-0060008-00140-0080008-00140-0100008-00140-0120008-00140-0160008-00140-02000
ShankDia.(d)
OverallLength
(L)
9°9°9°9°9° - - - - - -
4466668
10121620
45
45
50
50
55
55
65
75
80
110
135
When you order, indicate MSE445 (D).
Our original MUGEN-COATING has been put on 4-flute end mill.Compared with 30 helix angle, it can be reduced cutting resistance
Unit [size : mm]
MSE445MUGEN-COATING 4-Flute End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
223
Code No. Dia(D)
Lengthof Cut
( )
NeckTaper Angle
(y°)
11.11.21.31.41.51.61.71.81.92
2.12.22.32.42.52.62.72.82.93
3.13.23.33.43.5
1.51.71.82
2.12.32.42.62.72.93
3.23.33.53.63.83.94.14.24.56
6.26.46.66.87
9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9° 9°
44444444444444444444666666
08-00133-0010008-00133-0011008-00133-0012008-00133-0013008-00133-0014008-00133-0015008-00133-0016008-00133-0017008-00133-0018008-00133-0019008-00133-0020008-00133-0021008-00133-0022008-00133-0023008-00133-0024008-00133-0025008-00133-0026008-00133-0027008-00133-0028008-00133-0029008-00133-0030008-00133-0031008-00133-0032008-00133-0033008-00133-0034008-00133-00350
ShankDia.(d)
OverallLength
(L)
4545454545454545454545454545454545454545505050505050
Code No. Dia(D)
Lengthof Cut
( )
NeckTaper Angle
(y°)
4.84.95
5.15.25.35.45.55.65.75.85.96
6.16.26.36.46.56.66.76.86.97
7.17.27.37.47.57.67.77.87.98
8.18.28.38.48.5
9.69.810
10.210.410.610.811.211.411.612
12.4131313
13.513.513.51414151516161616161617171717191818181818
9°9°9°9°9°9°9°9°9°9°9°9°–
9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° – 9° 9° 9° 9° 9°
6666666666666888888888888888888881010101010
08-00133-0048008-00133-0049008-00133-0050008-00133-0051008-00133-0052008-00133-0053008-00133-0054008-00133-0055008-00133-0056008-00133-0057008-00133-0058008-00133-0059008-00133-0060008-00133-0061008-00133-0062008-00133-0063008-00133-0064008-00133-0065008-00133-0066008-00133-0067008-00133-0068008-00133-0069008-00133-0070008-00133-0071008-00133-0072008-00133-0073008-00133-0074008-00133-0075008-00133-0076008-00133-0077008-00133-0078008-00133-0079008-00133-0080008-00133-0081008-00133-0082008-00133-0083008-00133-0084008-00133-00850
ShankDia.(d)
OverallLength
(L)
5050505555555555555555555565656565656565656565656565656565656565657575757575
08-00133-0036008-00133-0037008-00133-0038008-00133-0039008-00133-0040008-00133-0041008-00133-0042008-00133-0043008-00133-0044008-00133-0045008-00133-0046008-00133-00470
3.63.73.83.94
4.14.24.34.44.54.64.7
7.27.47.67.88
8.28.48.68.89
9.29.4
9°9°9°9°9°9°9°9°9°9°9°9°
666666666666
505050505050505050505050
New flute design brought a remarkable shearing ability.High efficent machining is realized both for plunge cuttingand slotting.MUGEN-COATING prolong the tool life more than ever.
Unit [size : mm]
When you order, indicate MSZ345 (D).
MSZ345MUGEN-COATING 3-Flute POWER “Z” End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
224
New flute design brought a remarkable shearing ability.High efficent machining is realized both for plunge cuttingand slotting.MUGEN-COATING prolong the tool life more than ever.
Unit [size : mm]
When you order, indicate MSZ345 (D).
Code No.Dia(D)
Lengthof Cut( )
NeckTaper Angle
(y°)
8.68.78.88.99
9.19.29.39.49.59.69.79.89.910
10.110.210.310.410.510.610.710.810.911
11.111.211.311.411.511.611.711.811.912
1819191919192020202020212121212222222222222222222225252525252525252526
9°9°9°9°9°9°9°9°9°9°9°9°9° 9° – 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° 9° –
1010101010101010101010101010101212121212121212121212121212121212121212
08-00133-0086008-00133-0087008-00133-0088008-00133-0089008-00133-0090008-00133-0091008-00133-0092008-00133-0093008-00133-0094008-00133-0095008-00133-0096008-00133-0097008-00133-0098008-00133-0099008-00133-0100008-00133-0101008-00133-0102008-00133-0103008-00133-0104008-00133-0105008-00133-0106008-00133-0107008-00133-0108008-00133-0109008-00133-0110008-00133-0111008-00133-0112008-00133-0113008-00133-0114008-00133-0115008-00133-0116008-00133-0117008-00133-0118008-00133-0119008-00133-01200
ShankDia.(d)
OverallLength
(L)
7575757575757575757575757575758080808080808080808080808080808080808080
MSZ345MUGEN-COATING 3-Flute POWER “Z” End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
225
It is very suitable for roughing and semi-finshing onstainless steels and tough materials.High performance for reducing roughing time.
Unit [size : mm]
When you order, indicate MSX440 (D).
Code No. Dia (D) Length of Cut( )
Corner Radius(R)
3456789
101112131415161820
8111313191922222626262626323238
0.20.20.20.30.30.30.30.30.30.30.70.71111
66668810101212161616162020
08-00144-0030008-00144-0040008-00144-0050008-00144-0060008-00144-0070008-00144-0080008-00144-0090008-00144-0100008-00144-0110008-00144-0120008-00144-0130008-00144-0140008-00144-0150008-00144-0160008-00144-0180008-00144-02000
Shank Dia.(d)
OverallLength
(L)
5555555560607070808090909090105105
MSX440MUGEN-COATING 4-Flute POWER End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
226
MUGEN-COATING has been put on our original end mill deep ribIt is very suitable for cutting on narrow and deep rib by long neck end mill.
Code No.Dia(D)
EffectiveLength
( )
NeckTaper Angle
(y°)
0.1
0.2
0.3
0.4
0.5
0.30.51
0.51
1.52
2.53
3.541
1.52
2.534569123456789
101212
0.15
0.3
0.4
0.6
0.7
0.085
0.18
0.28
0.37
0.46
08-00200-0100308-00200-0100508-00200-0101008-00200-0200508-00200-0201008-00200-0201508-00200-0202008-00200-0202508-00200-0203008-00200-0203508-00200-0204008-00200-0301008-00200-0301508-00200-0302008-00200-0302508-00200-0303008-00200-0304008-00200-0305008-00200-0306008-00200-0309008-00200-0401008-00200-0402008-00200-0403008-00200-0404008-00200-0405008-00200-0406008-00200-0407008-00200-0408008-00200-0409008-00200-0410008-00200-0412008-00200-0501008-00200-05020
ShankDia.(d)
OverallLength
(L)
12°
12°
12°
12°
12°
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.30' 1° 1°30' 2° 3°
4
4
4
4
4
45
45
45
45
45
0.34
0.55
1.07
0.57
1.09
1.61
2.13
2.65
3.17
3.69
4.22
1.09
1.61
2.13
2.65
3.17
4.22
5.26
6.3
9.43
1.11
2.15
3.2
4.24
5.28
6.33
7.37
8.41
9.45
10.5
12.58
1.14
2.18
0.36
0.58
1.12
0.59
1.14
1.68
2.23
2.77
3.31
3.86
4.4
1.14
1.68
2.23
2.77
3.31
4.4
5.49
6.58
9.85
1.16
2.25
3.34
4.43
5.52
6.61
7.7
8.79
9.88
10.97
13.15
1.19
2.28
0.38
0.61
1.18
0.62
1.19
1.76
2.33
2.9
3.47
4.04
4.61
1.19
1.76
2.33
2.9
3.47
4.61
5.75
6.89
10.31
1.22
2.36
3.5
4.64
5.78
6.92
8.06
9.2
10.34
11.48
13.76
1.24
2.38
0.4
0.64
1.23
0.65
1.25
1.85
2.44
3.04
3.64
4.24
4.84
1.25
1.85
2.44
3.04
3.64
4.84
6.03
7.23
10.82
1.28
2.47
3.67
4.87
6.06
7.26
8.46
9.65
10.85
12.05
14.44
1.3
2.5
0.44
0.71
1.37
0.72
1.38
2.05
2.71
3.38
4.04
4.7
5.37
1.38
2.05
2.71
3.38
4.04
5.37
6.69
8.02
12
1.42
2.74
4.07
5.4
6.72
8.05
9.38
10.71
12.03
13.36
16.02
1.45
2.77
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
When you order, indicate MHR230 (D) x ( ). ( ) is reference value.y°
MHR230MUGEN-COATING 2-Flute Long Neck End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
227
When you order, indicate MHR230 (D) x ( ). ( ) is reference value.y°
Code No.Dia(D)
EffectiveLength
( )
NeckTaper Angle
(y°)
0.5
0.6
0.7
0.8
0.9
3456789
1012152345678
101215182468
10468
101214162024468
1015
0.7
0.9
1
1.2
1.4
0.46
0.56
0.66
0.76
0.86
08-00200-0503008-00200-0504008-00200-0505008-00200-0506008-00200-0507008-00200-0508008-00200-0509008-00200-0510008-00200-0512008-00200-0515008-00200-0602008-00200-0603008-00200-0604008-00200-0605008-00200-0606008-00200-0607008-00200-0608008-00200-0610008-00200-0612008-00200-0615008-00200-0618008-00200-0702008-00200-0704008-00200-0706008-00200-0708008-00200-0710008-00200-0804008-00200-0806008-00200-0808008-00200-0810008-00200-0812008-00200-0814008-00200-0816008-00200-0820008-00200-0824008-00200-0904008-00200-0906008-00200-0908008-00200-0910008-00200-09150
ShankDia.(d)
OverallLength
(L)
12°
12°
12°
12°
12°
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
4
4
4
4
4
45
50
45
50
45
50
45
50
60
45
50
60
3.22
4.26
5.31
6.35
7.39
8.44
9.48
10.52
12.61
15.74
2.18
3.22
4.26
5.31
6.35
7.39
8.44
10.52
12.61
15.74
18.86
2.18
4.26
6.35
8.44
10.52
4.26
6.35
8.44
10.52
12.61
14.69
16.78
20.95
25.12
4.26
6.35
8.44
10.52
15.74
3.37
4.46
5.54
6.63
7.72
8.81
9.9
10.99
13.17
16.44
2.28
3.37
4.46
5.54
6.63
7.72
8.81
10.99
13.17
16.44
19.71
2.28
4.46
6.63
8.81
10.99
4.46
6.63
8.81
10.99
13.17
15.35
17.53
21.89
26.24
4.46
6.63
8.81
10.99
16.44
3.52
4.66
5.8
6.95
8.09
9.23
10.37
11.51
13.79
17.21
2.38
3.52
4.66
5.8
6.95
8.09
9.23
11.51
13.79
17.21
20.63
2.38
4.66
6.95
9.23
11.51
4.66
6.95
9.23
11.51
13.79
16.07
18.35
22.91
27.47
4.66
6.95
9.23
11.51
17.21
3.7
4.89
6.09
7.29
8.48
9.68
10.88
12.07
14.47
18.06
2.5
3.7
4.89
6.09
7.29
8.48
9.68
12.07
14.47
18.06
21.65
2.5
4.89
7.29
9.68
12.07
4.89
7.29
9.68
12.07
14.47
16.86
19.25
24.04
28.83
4.89
7.29
9.68
12.07
18.06
4.1
5.43
6.76
8.08
9.41
10.74
12.07
13.39
16.05
20.03
2.77
4.1
5.43
6.76
8.08
9.41
10.74
13.39
16.05
20.03
24.01
2.77
5.43
8.08
10.74
13.39
5.43
8.08
10.74
13.39
16.05
18.7
21.36
26.66
Free
5.43
8.08
10.74
13.39
20.03
MUGEN-COATING has been put on our original end mill deep ribIt is very suitable for cutting on narrow and deep rib by long neck end mill.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
MHR230MUGEN-COATING 2-Flute Long Neck End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
228
1.2
1.4
1.5
161820222530468
1012162068
1012141622468
101214161820253035384045
1.8
2.1
2.3
1.15
1.35
1.45
08-00200-1016008-00200-1018008-00200-1020008-00200-1022008-00200-1025008-00200-1030008-00200-1204008-00200-1206008-00200-1208008-00200-1210008-00200-1212008-00200-1216008-00200-1220008-00200-1406008-00200-1408008-00200-1410008-00200-1412008-00200-1414008-00200-1416008-00200-1422008-00200-1504008-00200-1506008-00200-1508008-00200-1510008-00200-1512008-00200-1514008-00200-1516008-00200-1518008-00200-1520008-00200-1525008-00200-1530008-00200-1535008-00200-1538008-00200-1540008-00200-15450
12°
12°
12°
4
4
4
60
70
50
60
50
60
50
60
70
80
16.8
18.89
20.97
23.06
26.19
31.4
4.29
6.37
8.46
10.55
12.63
16.8
20.97
6.37
8.46
10.55
12.63
14.72
16.8
23.06
4.29
6.37
8.46
10.55
12.63
14.72
16.8
18.89
20.97
26.19
31.4
36.62
39.74
41.83
47.04
17.55
19.73
21.91
24.09
27.36
32.81
4.48
6.66
8.84
11.02
13.2
17.55
21.91
6.66
8.84
11.02
13.2
15.38
17.55
24.09
4.48
6.66
8.84
11.02
13.2
15.38
17.55
19.73
21.91
27.36
32.81
38.25
41.52
43.7
49.15
18.38
20.66
22.94
25.22
28.64
34.34
4.69
6.97
9.25
11.53
13.82
18.38
22.94
6.97
9.25
11.53
13.82
16.1
18.38
25.22
4.69
6.97
9.25
11.53
13.82
16.1
18.38
20.66
22.94
28.64
34.34
40.05
43.47
45.75
Free
19.28
21.67
24.07
26.46
30.05
36.03
4.92
7.32
9.71
12.1
14.49
19.28
24.07
7.32
9.71
12.1
14.49
16.89
19.28
26.46
4.92
7.32
9.71
12.1
14.49
16.89
19.28
21.67
24.07
30.05
36.03
Free
Free
Free
Free
21.39
24.04
26.7
Free
Free
Free
5.46
8.11
10.77
13.42
16.08
21.39
26.7
8.11
10.77
13.42
16.08
18.73
21.39
Free
5.46
8.11
10.77
13.42
16.08
18.73
21.39
24.04
Free
Free
Free
Free
Free
Free
Free
Code No.Dia(D)
EffectiveLength
( )
NeckTaper Angle
(y°)
1
3456789
101214
1.5 0.95
08-00200-1003008-00200-1004008-00200-1005008-00200-1006008-00200-1007008-00200-1008008-00200-1009008-00200-1010008-00200-1012008-00200-10140
ShankDia.(d)
OverallLength
(L)
12°
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
4
50
3.25
4.29
5.33
6.37
7.42
8.46
9.5
10.55
12.63
14.72
3.39
4.48
5.57
6.66
7.75
8.84
9.93
11.02
13.2
15.38
3.55
4.69
5.83
6.97
8.11
9.25
10.39
11.53
13.82
16.1
3.73
4.92
6.12
7.32
8.51
9.71
10.91
12.1
14.49
16.89
4.13
5.46
6.79
8.11
9.44
10.77
12.1
13.42
16.08
18.73
MUGEN-COATING has been put on our original end mill deep ribIt is very suitable for cutting on narrow and deep rib by long neck end mill.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
MHR230MUGEN-COATING 2-Flute Long Neck End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
229
2
2.5
18202568
1012141618202530354050608
10121416182025304050
3
3.7
1.94
2.4
08-00200-1818008-00200-1820008-00200-1825008-00200-2006008-00200-2008008-00200-2010008-00200-2012008-00200-2014008-00200-2016008-00200-2018008-00200-2020008-00200-2025008-00200-2030008-00200-2035008-00200-2040008-00200-2050008-00200-2060008-00200-2508008-00200-2510008-00200-2512008-00200-2514008-00200-2516008-00200-2518008-00200-2520008-00200-2525008-00200-2530008-00200-2540008-00200-25500
12°
12°
4
4
70
50
60
70
8090100110
50
60
70
90100
18.89
20.97
26.19
6.4
8.48
10.57
12.66
14.74
16.83
18.91
21
26.21
31.43
36.64
41.85
52.28
65.71
8.58
10.67
12.75
14.84
16.93
19.01
21.1
26.31
31.52
41.95
52.38
19.73
21.91
27.36
6.69
8.86
11.04
13.22
15.4
17.58
19.76
21.94
27.39
32.83
38.28
43.73
54.62
Free
8.97
11.15
13.32
15.5
17.68
19.86
22.04
27.49
32.94
43.83
Free
20.66
22.94
28.64
7
9.28
11.56
13.84
16.12
18.4
20.69
22.97
28.67
34.37
Free
Free
Free
Free
9.39
11.67
13.95
16.23
18.51
20.79
23.07
28.78
Free
Free
Free
21.67
24.07
30.05
7.34
9.74
12.13
14.52
16.92
19.31
21.7
24.1
Free
Free
Free
Free
Free
Free
9.85
12.24
14.64
17.03
19.42
21.82
Free
Free
Free
Free
Free
Free
Free
Free
8.15
10.8
13.45
16.11
18.76
Free
Free
Free
Free
Free
Free
Free
Free
Free
10.93
13.58
Free
Free
Free
Free
Free
Free
Free
Free
Free
Code No. Dia(D)
EffectiveLength
( )
NeckTaper Angle
(y°)
1.6
1.8
68
1012141618202668
10121416
2.4
2.7
1.55
1.75
08-00200-1606008-00200-1608008-00200-1610008-00200-1612008-00200-1614008-00200-1616008-00200-1618008-00200-1620008-00200-1626008-00200-1806008-00200-1808008-00200-1810008-00200-1812008-00200-1814008-00200-18160
ShankDia.(d)
OverallLength
(L)
12°
12°
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
4
4
50
60
50
60
6.37
8.46
10.55
12.63
14.72
16.8
18.89
20.97
27.23
6.37
8.46
10.55
12.63
14.72
16.8
6.66
8.84
11.02
13.2
15.38
17.55
19.73
21.91
28.45
6.66
8.84
11.02
13.2
15.38
17.55
6.97
9.25
11.53
13.82
16.1
18.38
20.66
22.94
29.78
6.97
9.25
11.53
13.82
16.1
18.38
7.32
9.71
12.1
14.49
16.89
19.28
21.67
24.07
31.25
7.32
9.71
12.1
14.49
16.89
19.28
8.11
10.77
13.42
16.08
18.73
21.39
Free
Free
Free
8.11
10.77
13.42
16.08
18.73
21.39
MUGEN-COATING has been put on our original end mill deep ribIt is very suitable for cutting on narrow and deep rib by long neck end mill.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
MHR230MUGEN-COATING 2-Flute Long Neck End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
230
5
6
16202530354050602030405060
7.5
9
4.8
5.8
08-00200-5016008-00200-5020008-00200-5025008-00200-5030008-00200-5035008-00200-5040008-00200-5050008-00200-5060008-00200-6020008-00200-6030008-00200-6040008-00200-6050008-00200-60600
12°
-
6
6
60
70
80
90
110
120
80
90
100
110
120
17.17
21.34
26.56
31.77
36.98
42.2
52.63
Free
Free
Free
Free
Free
Free
17.94
22.3
27.74
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
18.78
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
When you order, indicate MHR230 (D) x ( ). ( ) is reference value.y°
Code No.Dia(D)
EffectiveLength
( )
NeckTaper Angle
(y°)
3
4
8101214161820253035405012162025303540455060
4.5
6
2.85
3.8
08-00200-3008008-00200-3010008-00200-3012008-00200-3014008-00200-3016008-00200-3018008-00200-3020008-00200-3025008-00200-3030008-00200-3035008-00200-3040008-00200-3050008-00200-4012008-00200-4016008-00200-4020008-00200-4025008-00200-4030008-00200-4035008-00200-4040008-00200-4045008-00200-4050008-00200-40600
ShankDia.(d)
OverallLength
(L)
12°
12°
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
6
6
50
60
70
809010050
60
70
80
90
100110
8.71
10.79
12.88
14.96
17.05
19.13
21.22
26.43
31.65
36.86
42.08
52.5
13
17.17
21.34
26.56
31.77
36.98
42.2
47.41
52.63
63.05
9.1
11.27
13.45
15.63
17.81
19.99
22.17
27.62
33.06
38.51
43.96
54.85
13.58
17.94
22.3
27.74
33.19
38.64
44.09
49.53
54.98
Free
9.52
11.8
14.08
16.36
18.65
20.93
23.21
28.91
34.61
40.32
46.02
57.42
14.22
18.78
23.34
29.04
34.75
Free
Free
Free
Free
Free
9.99
12.38
14.78
17.17
19.56
21.96
24.35
30.33
36.31
42.3
Free
Free
14.92
19.7
24.49
Free
Free
Free
Free
Free
Free
Free
11.08
13.74
16.39
19.04
21.7
24.35
27.01
Free
Free
Free
Free
Free
16.55
Free
Free
Free
Free
Free
Free
Free
Free
Free
MUGEN-COATING has been put on our original end mill deep ribIt is very suitable for cutting on narrow and deep rib by long neck end mill.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
MHR230MUGEN-COATING 2-Flute Long Neck End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
231
Unit [size : mm]
Code No.Dia(D)
EffectiveLength
( )
NeckTaper Angle
(y°)
0.3
0.4
0.5
0.6
0.8
1
1.5
2
6
6
6
6
6
6
6
6
60
60
60
60
60
60
60
60
0.4
0.6
0.7
0.9
1.2
1.5
2.3
3
0.28
0.37
0.46
0.56
0.76
0.95
1.45
1.94
3345456468368
1035
101520
08-00202-0303008-00202-0403008-00202-0404008-00202-0405008-00202-0504008-00202-0505008-00202-0506008-00202-0604008-00202-0606008-00202-0808008-00202-1003008-00202-1006008-00202-1008008-00202-1010008-00202-1503008-00202-1505008-00202-1510008-00202-1515008-00202-20200
ShankDia.(d)
OverallLength
(L)
15°
15°
15°
15°
15°
15°
15°
15°
Neck Dia.(d2)
Lengh ofCut( )
Semi-standard item. Please inquire for price and delivery
When you order, indicate MHRLN230-6(D) x ( )
MHRLN230-6MUGEN-COATING 2-Flute Long Neck End Mill (Shank Dia.6)
MUGEN Coating Endmill Series
EN
DM
ILL
232
MUGEN-COATING has been put on our original end mill for deep rib.It is very suitable for cutting on narrow and deep rib by long neck end mill.
Code No.Dia(D)
EffectiveLength
( )
NeckTaper Angle
(y°)
1
1.1
1.2
1.3
1.4
1.5
1.6
468
1012166
101668
1012166
121868
101214162268
1012141618206
1.5
1.7
1.8
1.9
2.1
2.3
2.4
0.95
1.05
1.15
1.25
1.35
1.45
1.55
08-00210-0100408-00210-0100608-00210-0100808-00210-0101008-00210-0101208-00210-0101608-00210-0110608-00210-0111008-00210-0111608-00210-0120608-00210-0120808-00210-0121008-00210-0121208-00210-0121608-00210-0130608-00210-0131208-00210-0131808-00210-0140608-00210-0140808-00210-0141008-00210-0141208-00210-0141408-00210-0141608-00210-0142208-00210-0150608-00210-0150808-00210-0151008-00210-0151208-00210-0151408-00210-0151608-00210-0151808-00210-0152008-00210-01606
ShankDia.(d)
OverallLength
(L)
12°
12°
12°
12°
12°
12°
12°
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
4
4
4
4
4
4
4
50
50
60
50
60
50
60
50
60
50
60
50
4.29
6.37
8.46
10.55
12.63
16.8
6.37
10.55
16.8
6.37
8.46
10.55
12.63
16.8
6.37
12.63
18.89
6.37
8.46
10.55
12.63
14.72
16.8
23.06
6.37
8.46
10.55
12.63
14.72
16.8
18.89
20.97
6.37
4.48
6.66
8.84
11.02
13.2
17.55
6.66
11.02
17.55
6.66
8.84
11.02
13.2
17.55
6.66
13.2
19.73
6.66
8.84
11.02
13.2
15.38
17.55
24.09
6.66
8.84
11.02
13.2
15.38
17.55
19.73
21.91
6.66
4.69
6.97
9.25
11.53
13.82
18.38
6.97
11.53
18.38
6.97
9.25
11.53
13.82
18.38
6.97
13.82
20.66
6.97
9.25
11.53
13.82
16.1
18.38
25.22
6.97
9.25
11.53
13.82
16.1
18.38
20.66
22.94
6.97
4.92
7.32
9.71
12.1
14.49
19.28
7.32
12.1
19.28
7.32
9.71
12.1
14.49
19.28
7.32
14.49
21.67
7.32
9.71
12.1
14.49
16.89
19.28
26.46
7.32
9.71
12.1
14.49
16.89
19.28
21.67
24.07
7.32
5.46
8.11
10.77
13.42
16.08
21.39
8.11
13.42
21.39
8.11
10.77
13.42
16.08
21.39
8.11
16.08
24.04
8.11
10.77
13.42
16.08
18.73
21.39
Free
8.11
10.77
13.42
16.08
18.73
21.39
24.04
Free
8.11
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
When you order, indicate MHR430 (D) x ( ). ( ) is reference value.y°
MHR430MUGEN-COATING 4-Flute Long Neck End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
233
Code No. Dia(D)
EffectiveLength
( )
NeckTaper Angle
(y°)
1.6
1.7
1.8
1.9
2
2.5
8101214161820266
142468
101214161820256
162868
10121416182025308
12162025
2.4
2.5
2.7
2.8
3
3.7
1.55
1.65
1.74
1.84
1.94
2.4
08-00210-0160808-00210-0161008-00210-0161208-00210-0161408-00210-0161608-00210-0161808-00210-0162008-00210-0162608-00210-0170608-00210-0171408-00210-0172408-00210-0180608-00210-0180808-00210-0181008-00210-0181208-00210-0181408-00210-0181608-00210-0181808-00210-0182008-00210-0182508-00210-0190608-00210-0191608-00210-0192808-00210-0200608-00210-0200808-00210-0201008-00210-0201208-00210-0201408-00210-0201608-00210-0201808-00210-0202008-00210-0202508-00210-0203008-00210-0250808-00210-0251208-00210-0251608-00210-0252008-00210-02525
ShankDia.(d)
OverallLength
(L)
12°
12°
12°
12°
12°
12°
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
4
4
4
4
4
4
50
60
70506070
50
60
70506070
50
60
70
50
60
70
8.46
10.55
12.63
14.72
16.8
18.89
20.97
27.23
6.37
14.72
25.15
6.37
8.46
10.55
12.63
14.72
16.8
18.89
20.97
26.19
6.4
16.83
29.34
6.4
8.48
10.57
12.66
14.74
16.83
18.91
21
26.21
31.43
8.58
12.75
16.93
21.1
26.31
8.84
11.02
13.2
15.38
17.55
19.73
21.91
28.45
6.66
15.38
26.27
6.66
8.84
11.02
13.2
15.38
17.55
19.73
21.91
27.36
6.69
17.58
30.65
6.69
8.86
11.04
13.22
15.4
17.58
19.76
21.94
27.39
32.83
8.97
13.32
17.68
22.04
27.49
9.25
11.53
13.82
16.1
18.38
20.66
22.94
29.78
6.97
16.1
27.5
6.97
9.25
11.53
13.82
16.1
18.38
20.66
22.94
28.64
7
18.4
32.09
7
9.28
11.56
13.84
16.12
18.4
20.69
22.97
28.67
34.37
9.39
13.95
18.51
23.07
28.78
9.71
12.1
14.49
16.89
19.28
21.67
24.07
31.25
7.32
16.89
28.85
7.32
9.71
12.1
14.49
16.89
19.28
21.67
24.07
30.05
7.34
19.31
Free
7.34
9.74
12.13
14.52
16.92
19.31
21.7
24.1
Free
Free
9.85
14.64
19.42
Free
Free
10.77
13.42
16.08
18.73
21.39
Free
Free
Free
8.11
18.73
Free
8.11
10.77
13.42
16.08
18.73
21.39
Free
Free
Free
8.15
Free
Free
8.15
10.8
13.45
16.11
18.76
Free
Free
Free
Free
Free
10.93
Free
Free
Free
Free
When you order, indicate MHR430 (D) x ( ). ( ) is reference value.y°
MUGEN-COATING has been put on our original end mill for deep rib.It is very suitable for cutting on narrow and deep rib by long neck end mill.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
MHR430MUGEN-COATING 4-Flute Long Neck End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
234
5
6
8
10
2530354045501625355020304050305060406080
7.5
9
12
15
4.8
5.8
7.8
9.8
08-00210-0402508-00210-0403008-00210-0403508-00210-0404008-00210-0404508-00210-0405008-00210-0501608-00210-0502508-00210-0503508-00210-0505008-00210-0602008-00210-0603008-00210-0604008-00210-0605008-00210-0803008-00210-0805008-00210-0806008-00210-1004008-00210-1006008-00210-10080
12°
-
-
-
6
6
8
10
70
80
90
100
60
70
80
110
80
90
100
110
100
120
130
110
130
150
26.56
31.77
36.98
42.2
47.41
52.63
17.17
26.56
36.89
52.63
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
27.74
33.19
38.64
44.09
49.53
54.98
17.94
27.74
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
29.04
34.75
Free
Free
Free
Free
18.78
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
When you order, indicate MHR430 (D) x ( ). ( ) is reference value.y°
Code No. Dia(D)
EffectiveLength
( )
NeckTaper Angle
(y°)
3
3.5
4
81216202530152535121620
4.5
5.5
6
2.85
3.35
3.8
08-00210-0300808-00210-0301208-00210-0301608-00210-0302008-00210-0302508-00210-0303008-00210-0351508-00210-0352508-00210-0353508-00210-0401208-00210-0401608-00210-04020
ShankDia.(d)
OverallLength
(L)
12°
12°
12°
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
6
6
6
50
60
70
60708050
60
8.71
12.88
17.05
21.22
26.43
31.65
16.01
26.43
36.86
13
17.17
21.34
9.1
13.45
17.81
22.17
27.62
33.06
16.72
27.62
38.51
13.58
17.94
22.3
9.52
14.08
18.65
23.21
28.91
34.61
17.5
28.91
40.32
14.22
18.78
23.34
9.99
14.78
19.56
24.35
30.33
36.31
18.37
30.33
Free
14.92
19.7
24.49
11.08
16.39
21.7
27.01
Free
Free
20.37
Free
Free
16.55
Free
Free
MUGEN-COATING has been put on our original end mill for deep rib.It is very suitable for cutting on narrow and deep rib by long neck end mill.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
MHR430MUGEN-COATING 4-Flute Long Neck End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
235
It fits for Shrink Chuck System.
Code No. Dia (D)Length of Cut( )
NeckTaper Angle
(y°)
0.10.20.30.40.50.6
0.751
1.52
2.53456
0.20.40.60.81
1.21.5234568
1012
0.20.40.60.81
1.21.5234568
1012
15°15°15°15°15°15°15°15°15°15°15°
- - - -
08-00504-0001008-00504-0002008-00504-0003008-00504-0004008-00504-0005008-00504-0006008-00504-0007508-00504-0010008-00504-0015008-00504-0020008-00504-0025008-00504-0030008-00504-0040008-00504-0050008-00504-00600
Shank Dia.(d)
OverallLength
(L)
27.327.227.327.432.532.532.630.131.827.639.834.941.136.633.6
353535354040404040405050606060
Radius(R)
Shank Length
44444444466681012
When you order, indicate MSB230SF (R) ( ) is reference value. R4 and above,tolerance of Shank Dia. is h6
y
Unit [size : mm]
MSB230SFMUGEN-COATING 2-Flute Long End Mill with Short Shank
MUGEN Coating Endmill Series
EN
DM
ILL
236
Code No. Radius(R)
Lengthof Cut
( )
NeckTaperAngle
(y°)
0.050.05
0.0750.075
0.10.1
0.150.150.20.2
0.250.250.30.3
0.350.40.4
0.450.50.5
0.550.60.6
0.650.70.7
0.750.750.80.8
0.850.9
0.9511
0.10.1
0.150.150.20.20.30.30.60.60.80.80.90.91.11.21.21.41.51.51.71.81.82
2.12.12.32.32.42.42.62.72.933
0.10.1
0.150.150.20.20.30.30.40.40.50.50.60.60.70.80.80.911
1.11.21.21.31.41.41.51.51.61.61.71.81.922
15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°9°9°
08-00501-0000508-00500-0000508-00501-0000708-00500-0000708-00501-0001008-00500-0001008-00501-0001508-00500-0001508-00501-0002008-00500-0002008-00501-0002508-00500-0002508-00501-0003008-00500-0003008-00500-0003508-00501-0004008-00500-0004008-00500-0004508-00501-0005008-00500-0005008-00500-0005508-00501-0006008-00500-0006008-00500-0006508-00501-0007008-00500-0007008-00501-0007508-00500-0007508-00501-0008008-00500-0008008-00500-0008508-00500-0009008-00500-0009508-00501-0010008-00500-00100
ShankDia.(d)
OverallLength
(L)
46464646464646646646646646464666646
Dia(D)
5050505050505050505050505050505050505050505050505050505050505050506060
It is very suitable for precision three-dimensional cutting in the low to high speed range.
When you order, indicate MSB230 (R) ( ) is reference value. R3.5 and above,tolerance of Shank Dia. is h6
Code No. Radius(R)
Lengthof Cut
( )
NeckTaperAngle
(y°)
1.051.11.151.21.251.251.31.351.41.451.51.51.551.61.651.71.751.81.851.91.95
22.052.12.152.22.252.32.352.42.452.52.552.62.65
3.23.33.53.63.83.83.94.14.24.455555
5.15.35.45.65.75.96
6.26.36.56.66.86.97.17.27.48888
2.12.22.32.42.52.52.62.72.82.933
3.13.23.33.43.53.63.73.83.94
4.14.24.34.44.54.64.74.84.95
5.15.25.3
9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°9°
08-00500-0010508-00500-0011008-00500-0011508-00500-0012008-00501-0012508-00500-0012508-00500-0013008-00500-0013508-00500-0014008-00500-0014508-00501-0015008-00500-0015008-00500-0015508-00500-0016008-00500-0016508-00500-0017008-00500-0017508-00500-0018008-00500-0018508-00500-0019008-00500-0019508-00500-0020008-00500-0020508-00500-0021008-00500-0021508-00500-0022008-00500-0022508-00500-0023008-00500-0023508-00500-0024008-00500-0024508-00500-0025008-00500-0025508-00500-0026008-00500-00265
ShankDia.(d)
OverallLength
(L)
66664666664666666666666666666666666
Dia(D)
6060606060606060606060606060606060606060607070707070707070707070707070
Unit [size : mm]
y°
MSB230MUGEN-COATING 2-Flute Ball End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
237
It is very suitable for precision three-dimensional cutting in the low to high speed range.
Unit [size : mm]
When you order, indicate MSB230 (R) ( ) is reference value. R3.5 and above,tolerance of Shank Dia. is h6
y°
Code No. Radius(R)
Lengthof Cut
( )
NeckTaperAngle
(y°)
2.72.752.8
2.852.9
2.953
3.54
8.18.38.48.68.78.910
10.512
5.45.55.65.75.85.9678
9°9°9°9°9°9°- - -
08-00500-0027008-00500-0027508-00500-0028008-00500-0028508-00500-0029008-00500-0029508-00500-0030008-00500-0035008-00500-00400
ShankDia.(d)
OverallLength
(L)
666666668
Dia(D)
707070707070808090
Code No. Radius(R)
Lengthof Cut
( )
NeckTaperAngle
(y°)
4.55
5.5678910
13.515
16.52021252730
910111214161820
- - - - - - - -
08-00500-0045008-00500-0050008-00500-0055008-00500-0060008-00500-0070008-00500-0080008-00500-0090008-00500-01000
ShankDia.(d)
OverallLength
(L)
810101212161620
Dia(D)
90100100110160160170170
MSB230MUGEN-COATING 2-Flute Ball End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
238
Our original MUGEN-COATING has been put on 2-flute long ball end mill.The available sizes are from radius 0.1 to 5.Take advantage of long shank feature.
Code No. Dia (D)Length of Cut( )
NeckTaper Angle
(y°)
0.10.150.2
0.250.3
0.350.4
0.450.5
0.550.6
0.650.7
0.750.8
0.850.9
0.951
1.11.2
1.251.31.41.51.61.71.81.92
2.12.22.32.42.52.62.72.82.9345
0.50.75
11.251.5
1.752
2.252.5
2.753
3.253.5
3.754
4.254.5
4.755
5.56
6.256.57
7.58
8.59
9.510
10.511
11.512
12.513
13.514
14.5152025
0.20.30.40.50.60.70.80.91
1.11.21.31.41.51.61.71.81.92
2.22.42.52.62.83
3.23.43.63.84
4.24.44.64.85
5.25.45.65.86810
- - - - - - - -
- - - - - - -
- -
- - - - -
- - - - - - - -
- - - - - - - - - -
9°
9°
08-00510-0001008-00510-0001508-00510-0002008-00510-0002508-00510-0003008-00510-0003508-00510-0004008-00510-0004508-00510-0005008-00510-0005508-00510-0006008-00510-0006508-00510-0007008-00510-0007508-00510-0008008-00510-0008508-00510-0009008-00510-0009508-00510-0010008-00510-0011008-00510-0012008-00510-0012508-00510-0013008-00510-0014008-00510-0015008-00510-0016008-00510-0017008-00510-0018008-00510-0019008-00510-0020008-00510-0021008-00510-0022008-00510-0023008-00510-0024008-00510-0025008-00510-0026008-00510-0027008-00510-0028008-00510-0029008-00510-0030008-00510-0040008-00510-00500
Shank Dia.(d)
OverallLength
(L)
3333333333333333333333333334444466666666810
Radius(R)
70707070707070707070707070707070707070808080808080120120120120120150150150150150150150150150150160200
Unit [size : mm]
When you order, indicate MSBL230 (R) ( ) is reference value.y°
MSBL230MUGEN-COATING 2-Flute Long Ball End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
239
Unit [size : mm]
Semi-standard item. Please inquire for price and delivery
When you order, indicate MSBXL230 (R).
Code No. Dia.(D)
Radius(R)
1.53568
10121520
0.51
1.52
2.53456
08-00600-0005008-00600-0010008-00600-0015008-00600-0020008-00600-0025008-00600-0030008-00600-0040008-00600-0050008-00600-00600
ShankDia.(d)
OverallLength
(L)
12345681012
66666681012
60
60
60
70
70
80
90
100
110
NeckTaper Angle
(y°)
12°12°12°12°12° - - - -
Unit [size : mm]
Original 3-flute design and unequal flute spacing to suppress chattering realize high efficient machining.
When you order, indicate MSB345 (R).(y) is reference value
5
Code No. Radius(R)
0.51
1.52
2.5345
2.55
7.510
12.5152025
1234568
10
3334668
10
08-00511-0005008-00511-0010008-00511-0015008-00511-0020008-00511-0025008-00511-0030008-00511-0040008-00511-00500
ShankDia.(d)
OverallLength
(L)
100
100
120
150
180
180
200
250
Lengthof Cut
( )Dia(D)
Lengthof Cut
( )
MSBXL230MUGEN-COATING 2-Flute Extra Long Ball End Mill
MSB345MUGEN-COATING 3-Flute Ball End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
240
Act
ual E
ffect
ive
Inclined Angle
It Fits For Shrink Chuck System.
Unit [size : mm]
Code No. Radius(R)
EffectiveLength
( )Neck
Taper Angle(y°)
0.1
0.15
0.2
0.25
0.3
0.4
0.50.75
11.250.50.6
0.751
1.251.5
1.750.75
11.52
2.51
1.52
2.53
1.52
2.53
3.54
4.55
5.56
2
3
0.15
0.2
0.3
0.35
0.45
0.6
08-00525-0010308-00525-0010508-00525-0010708-00525-0010908-00525-0015108-00525-0015208-00525-0015308-00525-0015408-00525-0015508-00525-0015608-00525-0015708-00525-0020208-00525-0020308-00525-0020408-00525-0020508-00525-0020608-00525-0025108-00525-0025208-00525-0025308-00525-0025408-00525-0025508-00525-0030108-00525-0030208-00525-0030308-00525-0030408-00525-0030508-00525-0030608-00525-0030708-00525-0030808-00525-0030908-00525-0031008-00525-0040108-00525-00402
ShankDia.(d)
OverallLength
(L)
0.18
0.28
0.37
0.46
0.56
0.76
NeckDia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.30' 1° 1°30' 2° 3°
4
4
4
4
4
4
35
35
35
35
35
40
35
0.55
0.81
1.06
1.32
0.55
0.65
0.80
1.06
1.32
1.58
1.84
0.82
1.08
1.60
2.11
2.63
1.10
1.61
2.13
2.63
3.16
1.61
2.13
2.65
3.16
3.68
4.20
4.71
5.23
5.75
6.26
2.13
3.16
0.56
0.83
1.10
1.37
0.56
0.67
0.83
1.09
1.36
1.63
1.90
0.84
1.11
1.65
2.18
2.72
1.13
1.66
2.20
2.73
3.27
1.66
2.19
2.73
3.26
3.80
4.33
4.87
5.40
5.94
6.47
2.19
3.26
0.58
0.86
1.13
1.41
0.57
0.69
0.85
1.13
1.41
1.68
1.96
0.87
1.14
1.70
2.25
2.81
1.16
1.71
2.27
2.82
3.38
1.71
2.26
2.82
3.37
3.92
4.48
5.03
5.59
6.14
6.70
2.25
3.36
0.60
0.89
1.17
1.46
0.59
0.71
0.88
1.17
1.45
1.74
2.03
0.89
1.18
1.75
2.33
2.90
1.19
1.77
2.34
2.92
3.49
1.76
2.34
2.91
3.49
4.06
4.64
5.21
5.79
6.36
6.94
2.32
3.47
0.64
0.95
1.26
1.57
0.63
0.75
0.94
1.25
1.56
1.87
2.18
0.95
1.26
1.88
2.50
3.13
1.27
1.89
2.51
3.14
3.76
1.88
2.50
3.12
3.75
4.37
4.99
5.61
6.23
6.85
7.48
2.48
3.72
15°
15°
15°
15°
15°
15°
0.2
0.3
0.4
0.5
0.6
0.8
Dia.(D)
ShankLength
( )27.327.126.826.627.527.427.327
26.826.526.327.427.226.726.225.727.326.826.325.825.327
26.526
25.525
29.529
28.528
27.526.925.9
When you order, indicate MRB230SF (R) x ( ).
MRB230SFMUGEN-COATING 2-Flute Long Neck Ball End Mill with Short Shank
MUGEN Coating Endmill Series
EN
DM
ILL
241
Act
ual E
ffect
ive
Inclined Angle
It Fits For Shrink Chuck System.
Unit [size : mm]
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
0.4
0.5
0.75
1
1.5
4
5
3
4
5
6
8
10
3
4
6
8
10
3
4
6
8
10
12
14
16
18
20
6
8
10
12
0.6
0.75
1.1
1.5
2.5
0.8
1
1.5
2
3
08-00525-0040308-00525-0040408-00525-0050108-00525-0050208-00525-0050308-00525-0050408-00525-0050508-00525-0050608-00525-0075108-00525-0075208-00525-0075408-00525-0075508-00525-0075608-00525-0100108-00525-0100208-00525-0100308-00525-0100408-00525-0100508-00525-0100608-00525-0100708-00525-0100808-00525-0100908-00525-0101008-00525-0150108-00525-0150208-00525-0150308-00525-01504
ShankDia.(d)
OverallLength
(L)
0.76
0.95
1.45
1.94
2.85
NeckDia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
4
4
4
4
4
40
35
40
35
40
35
40
45
50
40
4.19
5.23
3.18
4.21
5.24
6.28
8.34
10.41
3.17
4.20
6.27
8.34
10.40
3.18
4.21
6.28
8.35
10.41
12.48
14.55
16.62
18.68
20.75
6.44
8.50
10.57
12.64
4.33
5.40
3.27
4.34
5.41
6.48
8.62
10.76
3.25
4.32
6.46
8.60
10.74
3.25
4.32
6.46
8.60
10.74
12.88
15.02
17.16
19.30
21.44
6.61
8.75
10.89
13.03
4.47
5.58
3.37
4.48
5.59
6.69
8.91
11.13
3.34
4.45
6.67
8.88
11.10
3.34
4.45
6.66
8.88
11.10
13.31
15.53
17.75
19.96
22.18
6.79
9.01
11.23
13.44
4.62
5.77
3.48
4.63
5.78
6.93
9.23
11.53
3.44
4.59
6.89
9.19
11.49
3.43
4.58
6.88
9.18
11.48
13.77
16.07
18.37
20.67
22.97
7.00
9.29
11.59
13.89
4.97
6..21
3.72
4.97
6.21
7.45
9.94
12.42
3.66
4.91
7.39
9.88
12.36
3.63
4.87
7.36
9.84
12.33
14.82
17.30
19.79
Free
Free
7.45
9.93
Free
Free
Radius(R)
15°
15°
15°
15°
15°
ShankLength
( )29.928.926.325.329.328.326.324.327.226.229.227.225.228.127.125.128.126.129.127.125.128.126.131.829.827.825.8
When you order, indicate MRB230SF (R) x ( ).
MRB230SFMUGEN-COATING 2-Flute Long Neck Ball End Mill with Short Shank
MUGEN Coating Endmill Series
EN
DM
ILL
242
Code No. Radius(R)
EffectiveLength
( )Neck
Taper Angle(y°)
0.05
0.1
0.15
0.2
0.30.50.50.5
0.7511
1.251.51.5
1.7522
2.53
0.611
1.251.51.5
1.7522
2.252.5
2.753
3.54
4.55
0.7511
1.51.522
2.5
0.07
0.15
0.2
0.3
0.1
0.2
0.3
0.4
08-00520-2005108-00520-2005208-00520-0010108-00521-0010108-00520-1010108-00520-0010208-00521-0010208-00520-1010208-00520-0010308-00521-0010308-00520-1010308-00520-0010408-00521-0010408-00520-0010508-00520-0010608-00520-1015108-00520-0015108-00521-0015108-00520-3015308-00520-1015208-00521-0015208-00520-3015408-00520-0015208-00521-0015308-00520-3015508-00520-1015308-00520-3015608-00520-1015408-00520-3015708-00520-2015108-00520-3015808-00520-2015208-00520-1020108-00520-0020108-00521-0020108-00520-0020408-00521-0020208-00520-0020208-00521-0020308-00520-00205
ShankDia.(d)
OverallLength
(L)
0.085
0.18
0.28
0.37
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
4446446446446444464464464444444444646464
45454550454550454550454550454545455045455045455045454545454545454545504550455045
0.34
0.55
0.57
0.57
0.83
1.09
1.09
1.36
1.62
1.62
1.88
2.14
2.14
2.66
3.18
0.68
1.09
1.09
1.34
1.61
1.61
1.83
2.14
2.14
2.38
2.66
2.91
3.18
3.69
4.21
4.73
5.25
0.85
1.12
1.12
1.64
1.64
2.16
2.16
2.68
0.36
0.57
0.59
0.59
0.87
1.14
1.14
1.41
1.68
1.68
1.96
2.23
2.23
2.77
3.32
0.70
1.14
1.14
1.39
1.68
1.68
1.94
2.22
2.22
2.48
2.77
3.03
3.31
3.85
4.39
4.94
5.48
0.88
1.16
1.16
1.70
1.70
2.25
2.25
2.79
0.37
0.60
0.62
0.62
0.90
1.19
1.19
1.47
1.76
1.76
2.04
2.33
2.33
2.90
3.47
0.73
1.18
1.18
1.45
1.75
1.75
2.02
2.32
2.32
2.59
2.89
3.16
3.46
4.02
4.59
5.16
5.73
0.92
1.20
1.20
1.77
177
2.34
2.34
2.91
0.39
0.63
0.64
0.64
0.94
1.24
1.24
1.54
1.84
1.84
2.14
2.44
2.44
3.04
3.64
0.75
1.23
1.23
1.52
1.83
1.83
2.12
2.43
2.43
2.71
3.03
3.31
3.63
4.21
4.81
5.41
6.01
0.95
1.25
1.25
1.85
1.85
2.45
2.45
3.05
0.42
0.69
0.70
0.70
1.04
1.37
1.37
1.70
2.03
2.03
2.36
2.70
2.70
3.36
4.02
0.82
1.35
1.35
1.67
2.02
2.02
2.33
2.68
2.68
3.00
3.34
3.66
4.01
4.65
5.32
5.98
6.65
1.04
1.37
1.37
2.03
2.03
2.70
2.70
3.36
12°
12°
12°
12°
Dia. (D)
It is very suitable for cutting on narrow and deep rib by long neck end mill.It is possible to have deep and precision three-dimensional cutting in the low to high speed range.
Unit [size : mm]
Act
ual E
ffect
ive
Inclined Angle
When you order, indicate MRB203 (R) x ( ) x (d). ( ) is reference value. Overall Length 80 and above, tolerance of Shank Dia. is h6
y°
MRB230MUGEN-COATING 2-Flute Long Neck Ball End Mil
MUGEN Coating Endmill Series
EN
DM
ILL
243
Code No. Radius(R)
EffectiveLength
( )Neck
Taper Angle(y°)
2.533
3.54
4.55
5.561
1.51.522
2.53
3.544
4.555
5.5667889
101.522
2.533
3.544
4.55
5.566
0.3
0.35
0.45
0.4
0.5
0.6
08-00521-0020408-00520-0020308-00521-0020508-00520-1020208-00520-0020608-00520-1020308-00520-0020708-00520-1020408-00520-1020508-00520-3025108-00520-1025108-00521-0025108-00520-0025108-00521-0025208-00520-1025208-00520-1025308-00520-1025408-00520-0025208-00521-0025308-00520-1025508-00520-0025508-00521-0025408-00520-1025608-00520-0025308-00521-0025508-00520-1025708-00520-0025408-00521-0025608-00521-3025108-00521-3025208-00520-1030108-00520-0030108-00521-0030108-00520-1030208-00520-0030508-00521-0030208-00520-1030308-00520-0030208-00521-0030308-00520-1030408-00520-0030608-00520-1030508-00520-0030308-00521-00304
ShankDia.(d)
OverallLength
(L)
0.37
0.46
0.56
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.30' 1° 1°30' 2° 3°
64644444444646444464464464466644644644644446
5045504545454545454545504550454545455045455045455045455055554545504545504545504545454550
2.68
3.20
3.20
3.72
4.24
4.76
5.29
5.81
6.33
1.13
1.65
1.65
2.17
2.17
2.69
3.21
3.73
4.25
4.25
4.78
5.30
5.30
5.82
6.34
6.34
7.38
8.42
8.42
9.47
10.51
1.64
2.17
2.17
2.69
3.21
3.21
3.73
4.25
4.25
4.77
5.23
5.82
6.34
6.34
2.79
3.34
3.34
3.88
4.42
4.97
5.51
6.06
6.60
1.16
1.71
1.71
2.25
2.25
2.80
3.34
3.89
4.43
4.43
4.98
5.52
5.52
6.07
6.61
6.61
7.70
8.79
8.79
9.88
10.97
1.71
2.25
2.25
2.79
3.34
3.34
3.88
4.43
4.43
4.97
5.40
6.06
6.61
6.61
2.91
3.48
3.48
4.05
4.62
5.19
5.76
6.33
6.90
1.21
1.78
1.78
2.35
2.35
2.92
3.49
4.06
4.63
4.63
5.20
5.77
5.77
6.34
6.91
6.91
8.05
9.19
9.19
10.33
11.47
1.77
2.34
2.34
2.91
3.48
3.48
4.05
4.62
4.62
5.19
5.59
6.33
6.90
6.90
3.05
3.64
3.64
4.24
4.84
5.44
6.04
6.64
7.23
1.26
1.85
1.85
2.45
2.45
3.05
3.65
4.25
4.85
4.85
5.44
6.04
6.04
6.64
7.24
7.24
8.44
9.63
9.63
10.83
12.03
1.84
2.44
2.44
3.04
3.64
3.64
4.24
4..84
4.84
5.43
5.79
6.63
7.23
7.23
3.36
4.02
4.02
4.69
5.35
6.01
6.68
7.34
8.00
137
2.03
2.03
2.69
2.69
3.36
4.02
4.69
5.35
5.35
6.01
6.68
6.68
7.34
8.00
8.00
9.33
10.66
10.66
11.99
13.31
2.02
2.68
2.68
3.34
4.01
4.01
4.67
5.33
5.33
6.00
6.23
7.32
7.99
7.99
12°
12°
12°
Dia. (D)
0.2
0.25
0.3
It is very suitable for cutting on narrow and deep rib by long neck end mill.It is possible to have deep and precision three-dimensional cutting in the low to high speed range.
Unit [size : mm]
Act
ual E
ffect
ive
Inclined Angle
MRB230MUGEN-COATING 2-Flute Long Neck Ball End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
244
Code No. Radius(R)
EffectiveLength
( )Neck
Taper Angle(y°)
6.57
7.588
08-00520-1030608-00520-0030708-00520-1030708-00520-0030408-00521-00305
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d2)Lengh of
Cut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
44446
4545454550
6.86
7.38
7.90
8.42
8.42
7.15
7.70
8.24
8.79
8.79
7.47
8.04
8.61
9.18
9.18
7.83
8.43
9.02
9.62
9.62
8.65
9.31
9.98
10.64
10.64
Dia. (D)
08-00520-1030808-00520-1030908-00520-1031008-00520-1031108-00521-0030608-00520-1031208-00520-1031308-00520-0040008-00521-0040108-00520-1040108-00521-0040208-00520-0040108-00521-0040308-00520-0040508-00520-0040208-00521-0040408-00520-0040608-00520-0040308-00521-0040508-00520-3040108-00520-0040408-00521-0040608-00520-2040108-00520-0050508-00521-0050108-00520-0050608-00521-0050208-00520-0051008-00521-0050308-00520-0050108-00521-0050408-00520-0051108-00520-0050208-00521-0050508-00520-0051208-00520-0050708-00521-0050608-00520-0050408-00521-00507
8.59
9.5101011122233445667889
101012334455667889
10101212
0.45
0.6
0.75
0.6
0.8
1
0.56
0.76
0.95
444464446464644644644644646464644644646
454545455045454550455045504545504545504545504545504550455045504545504545504550
8.94
9.47
9.99
10.51
10.40
11.55
12.59
2.16
2.16
3.20
3.20
4.25
4.25
5.29
6.33
6.33
7.29
8.42
8.42
9.46
10.50
10.40
12.59
3.22
3.22
4.27
4.27
5.24
5.31
6.35
6.35
7.40
8.44
8.44
9.48
10.52
10.41
12.61
12.61
9.33
9.88
10.42
10.97
10.75
12.06
13.14
2.24
2.24
3.33
3.33
4.42
4.42
5.51
6.60
6.60
7.53
8.78
8.78
9.87
10.96
10.74
13.14
3.35
3.35
4.44
4.44
5.41
5.53
6.62
6.62
7.71
8.79
8.79
9.88
10.97
10.76
13.15
13.15
9.76
10.33
10.90
11.47
11.13
13.61
13.75
2.33
2.33
3.47
3.47
4.61
4.61
5.75
6.89
6.89
7.79
9.17
9.17
10.31
11.45
11.12
13.73
3.48
3.48
4.62
4.62
5.59
5.76
6.90
6.90
8.04
9.18
9.18
10.32
11.46
11.13
13.75
13.75
10.22
10.82
11.42
12.02
11.54
13.21
14.41
2.42
2.42
3.62
3.62
4.82
4.82
6.01
7.21
7.21
8.17
9.60
9.60
10.80
12.00
11.52
14.39
3.63
3.63
4.83
4.83
5.78
6.02
7.22
7.22
8.42
9.61
9.61
10.81
12.01
11.53
14.40
14.40
11.31
11.97
12.63
13.30
12.45
14.62
15.95
2.65
2.65
3.97
3.97
5.30
5.30
6.63
7.96
7.96
8.70
10.61
10.61
11.94
13.26
12.42
15.92
3.97
3.97
5.30
5.30
6.21
6.63
7.96
7.96
9.28
10.61
10.61
11.94
13.26
12.42
15.92
15.92
12°
12°
12°
0.3
0.4
0.5
It is very suitable for cutting on narrow and deep rib by long neck end mill.It is possible to have deep and precision three-dimensional cutting in the low to high speed range.
Unit [size : mm]
Act
ual E
ffect
ive
Inclined Angle
MRB230MUGEN-COATING 2-Flute Long Neck Ball End Mil
MUGEN Coating Endmill Series
EN
DM
ILL
245
Code No. Radius(R)
EffectiveLength
( )Neck
Taper Angle(y°)
14161618202022466
08-00520-0051308-00520-0050808-00521-0050808-00520-0051408-00520-0050908-00521-0050908-00521-0051008-00520-2060108-00520-0060008-00521-00601
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d2)Lengh of
Cut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
4464466446
50506055556060454550
14.70
16.78
16.78
18.87
20.95
20.95
22.82
4.26
6.35
6.35
15.33
17.51
17.51
19.69
21.87
21.87
23.59
4.43
6.61
6.61
16.03
18.31
18.31
20.59
22.87
22.87
24.43
4.61
6.89
6.89
16.79
19.18
19.18
21.58
23.97
23.97
25.33
4.81
7.20
7.20
18.57
21.23
21.23
23.88
26.54
26.54
27.34
5.27
7.92
7.92
Dia. (D)
0.688
101012121416161820248
121634688
101212141616182020223048
12
0.9
1
1.1
1.2
1.2
1.4
1.5
1.6
08-00520-0060108-00521-0060208-00520-0060208-00521-0060308-00520-0060308-00521-0060408-00520-1060108-00520-1060208-00521-0060508-00520-2060208-00520-3060108-00520-2060308-00520-3070108-00520-3070208-00520-3070308-00520-3075108-00520-2075108-00520-2075208-00520-0075108-00521-0075108-00520-0075208-00520-0075308-00521-0075208-00520-0075408-00520-0075508-00521-0075508-00520-0075608-00520-0075708-00521-0075708-00520-1075108-00520-2075308-00520-2080108-00520-0080108-00520-00803
1.15
1.35
1.45
1.55
4646464464444444444644644644644444
45504550455050506055556045505045454545504545505050605555605570454545
8.43
8.43
10.52
10.41
12.48
12.48
14.69
16.78
16.78
18.86
20.95
25.12
8.43
12.60
16.77
3.21
4.26
6.34
8.43
8.43
10.51
12.60
12.60
14.69
16.77
16.77
18.86
20.94
20.94
23.03
31.37
4.25
8.43
12.60
8.79
8.79
10.96
10.75
12.89
12.89
15.32
17.50
17.50
19.68
21.86
26.22
8.78
13.13
17.49
3.33
4.41
6.59
8.77
8.77
10.95
13.13
13.13
15.31
17.49
17.49
19.67
21.85
21.85
24.02
32.74
4.41
8.77
13.13
9.17
9.17
11.45
11.12
13.33
13.33
16.01
18.29
18.29
20.58
22.86
27.42
9.16
13.72
18.28
3.45
4.59
6.87
9.15
9.15
11.43
13.71
13.71
15.99
18.27
18.27
20.55
22.84
22.84
25.12
34.24
4.58
9.14
13.70
9.59
9.59
11.99
11.51
13.81
13.81
16.77
19.17
19.17
21.56
23.95
28.74
9.57
14.36
19.15
3.58
4.78
7.17
9.56
9.56
11.96
14.35
14.35
16.74
19.14
19.14
21.53
23.92
23.92
26.32
35.89
4.77
9.55
14.34
10.58
10.58
13.23
12.40
14.89
14.89
18.54
21.20
21.20
23.85
26.50
Free
10.55
15.85
21.16
3.89
5.22
7.88
10.53
10.53
13.18
15.84
15.84
18.49
21.15
21.15
23.80
Free
26.46
Free
Free
5.21
10.51
15.82
12°
12°
12°
12°
0.6
0.7
0.75
0.8
0.5 0.75 1 0.95 12°
It is very suitable for cutting on narrow and deep rib by long neck end mill.It is possible to have deep and precision three-dimensional cutting in the low to high speed range.
Unit [size : mm]
Act
ual E
ffect
ive
Inclined Angle
MRB230MUGEN-COATING 2-Flute Long Neck Ball End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
246
Code No. Radius(R)
EffectiveLength
( )Neck
Taper Angle(y°)
16208
1216203446688
1010
08-00520-0080508-00520-0080708-00520-3090108-00520-3090208-00520-3090308-00520-3090408-00520-3100108-00520-0100008-00521-0100008-00520-0100108-00521-0100108-00520-0100208-00521-0100208-00520-0100308-00521-01003
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d2)Lengh of
Cut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
444444446464646
505545455055454550455045504550
16.77
20.94
8.42
12.59
16.76
20.94
3.23
4.27
4.27
6.36
6.36
8.44
8.44
10.53
10.53
17.48
21.84
8.76
13.12
17.47
21.83
3.33
4.42
4.42
6.60
6.60
8.78
8.78
10.95
10.95
18.27
22.83
9.13
13.69
18.25
22.81
3.44
4.58
4.58
6.86
6.86
9.14
9.14
11.42
11.42
19.13
23.91
9.53
14.32
19.11
23.89
3.56
4.76
4.76
7.15
7.15
9.54
9.54
11.94
11.94
21.13
Free
10.48
15.79
21.10
Free
3.85
5.17
5.17
7.83
7.83
10.48
10.48
13.14
13.14
Dia. (D)
0.8
0.9
1
1.25
1.5
1.2
0.75
1.5
2.3
2.5
1.6
1
2
2.5
3
1.55
0.95
1.94
2.4
2.85
12°
12121416161820202225253030353540406
101520253035668
1012
08-00520-0100408-00521-0100408-00520-0100508-00520-0100608-00521-0100508-00520-0100708-00520-0100808-00521-0100808-00520-0100908-00520-0101008-00521-0101008-00520-0101108-00521-0101208-00520-1100108-00521-0101408-00520-3100208-00521-0101508-00520-2125108-00520-1125108-00520-1125208-00520-1125308-00520-1125408-00520-1125508-00520-2125208-00520-3150208-00520-3150308-00520-0150008-00520-0150108-00520-31504
46446446446464646444444446666
4550505060555560606580708070809090454550556570706060606060
12.61
12.61
14.70
16.78
16.78
18.87
20.96
20.96
23.04
26.17
26.17
31.38
31.38
36.60
36.60
41.81
41.81
6.44
10.62
15.83
21.04
26.26
31.47
36.69
6.56
6.56
8.64
10.73
12.81
13.13
13.13
15.31
17.49
17.49
19.67
21.85
21.85
24.03
27.30
27.30
32.74
32.74
38.19
38.19
43.64
43.64
6.68
11.04
16.48
21.93
27.38
32.82
38.27
6.78
6.78
8.96
11.14
13.32
13.70
13.70
15.98
18.27
18.27
20.55
22.83
22.83
25.11
28.53
28.53
34.23
34.23
29.93
39.93
Free
45.64
6.93
11.49
17.20
22.90
28.60
Free
Free
7.03
7.03
9.31
11.59
13.88
14.33
14.33
16.72
19.12
19.12
21.51
23.90
23.90
26.30
29.89
29.89
Free
35.87
Free
41.85
Free
47.83
7.21
12.00
17.98
Free
Free
Free
Free
7.31
7.31
9.70
12.09
14.49
15.79
15.79
18.45
Free
21.10
Free
Free
26.41
Free
Free
33.04
Free
Free
Free
Free
Free
Free
7.87
13.18
Free
Free
Free
Free
Free
7.95
7.95
10.60
13.26
15.91
12°
12°
12°
12°
It is very suitable for cutting on narrow and deep rib by long neck end mill.It is possible to have deep and precision three-dimensional cutting in the low to high speed range.
Unit [size : mm]
Actu
al E
ffect
ive
Inclined Angle
MRB230MUGEN-COATING 2-Flute Long Neck Ball End Mil
MUGEN Coating Endmill Series
EN
DM
ILL
247
Code No. Radius(R)
EffectiveLength
( )Neck
Taper Angle(y°)
141516202530354010152025303540451012141516202530354045501015202530354045501020253035404550
08-00520-3150508-00520-0150308-00520-3150608-00520-0150508-00520-0150608-00520-0150708-00520-0150808-00520-1150108-00520-1175108-00520-1175208-00520-1175308-00520-1175408-00520-1175508-00520-1175608-00520-1175708-00520-1175808-00520-0200008-00520-3200108-00520-3200208-00520-0200108-00520-3200308-00520-0200308-00520-0200408-00520-0200508-00520-0200608-00520-0200708-00520-0200808-00520-0200908-00520-3250108-00520-1250108-00520-0250108-00520-0250208-00520-0250308-00520-0250408-00520-1250208-00520-1250308-00520-1250408-00520-3300108-00520-1300108-00520-1300208-00520-0300108-00520-1300308-00520-1300408-00520-1300508-00520-03003
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d2)Lengh of
Cut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
666666666666666666666666666666666666666666666
60606065657080906060656570809090656565656565707080859010070707070808090100100707070808090100120
14.90
15.94
16.98
21.16
26.37
31.58
36.80
42.01
10.72
15.93
21.14
26.36
31.57
36.79
42.00
47.22
10.83
12.91
15.00
16.04
17.09
21.26
26.47
31.68
36.90
42.11
47.33
52.54
10.81
16.02
21.24
26.45
31.66
36.88
42.09
47.31
52.52
Free
Free
Free
Free
Free
Free
Free
Free
15.50
16.59
17.68
22.04
27.48
32.93
38.38
43.83
11.12
16.57
22.01
27.46
32.91
38.36
43.80
49.25
11.22
13.40
15.58
16.67
17.76
22.12
27.57
33.01
38.46
43.91
49.36
54.80
11.18
16.63
22.08
27.52
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
16.16
17.30
18.44
23.00
28.70
34.40
40.11
45.81
11.56
17.26
22.96
28.67
34.37
40.07
45.77
Free
11.66
13.94
16.22
17.36
18.50
23.06
28.77
34.47
40.17
Free
Free
Free
11.59
17.29
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
16.88
18.08
19.27
24.06
30.04
36.03
42.01
Free
12.05
18.03
24.01
29.99
35.98
Free
Free
Free
12.14
14.53
16.92
18.12
19.32
24.10
30.09
Free
Free
Free
Free
Free
12.04
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
18.57
19.89
21.22
26.53
Free
Free
Free
Free
13.18
19.81
Free
Free
Free
Free
Free
Free
13.25
15.91
18.56
19.89
21.22
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Dia. (D)
1.5
1.75
2
2.5
3
2.5
2.8
3
3.5
6
3
3.5
4
5
6
2.85
3.35
3.8
4.8
5.8
12°
12°
12°
-
12°
It is very suitable for cutting on narrow and deep rib by long neck end mill.It is possible to have deep and precision three-dimensional cutting in the low to high speed range.
Unit [size : mm]
Actu
al E
ffect
ive
Inclined Angle
MRB230MUGEN-COATING 2-Flute Long Neck Ball End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
248
Code No. Dia.(D)
Radius(R)
EffectiveLength
( )
Lengthof cut
( )
0.30.40.8111
1.41.5
1.752
0.150.2
0.250.30.30.30.40.5
0.751
08-00522-0150108-00522-0200108-00522-0250108-00522-0300108-00522-0300508-00522-0300608-00522-0400808-00522-0501008-00522-0751508-00522-10020
ShankDia.(d)
OverallLength
(L)
0.30.40.50.60.60.60.811.52
3453568101520
Neck Dia. (d2)
0.280.370.460.560.560.560.760.951.451.94
6666666666
60
60
60
60
60
60
60
60
60
60
NeckTaper Angle
(y°)
15°15°15°15°15°15°15°15°15°15°
Semi-standard item. Please inquire for price and delivery.
Unit [size : mm]
When you order, indicate MRBLN230-6 (R) x ( )
MRBLN230-6MUGEN-COATING 2-Flute Long Neck Ball End Mil (Shank Dia. 6)
MUGEN Coating Endmill Series
EN
DM
ILL
249
Code No. Radius(R)
EffectiveLength
( )Neck
Taper Angle(y)
30'
1°
1°30'
2°
3°
5°30'
1°
1°30'
2°3°5°
30'
1°
1°30'
11.521
1.521
1.521
1.521
1.5
2
3232
3
23423423423
0.210.220.230.220.240.260.230.260.280.240.280.310.260.320.370.480.340.350.380.370.430.470.550.720.420.440.460.440.480.510.460.520.570.480.55
08-00570-0102008-00570-0102108-00570-0102208-00570-0104008-00570-0104108-00570-0104208-00570-0105008-00570-0105108-00570-0105208-00570-0106008-00570-0106108-00570-0106208-00570-0108008-00570-0108108-00570-0108208-00570-0109208-00570-0152108-00570-0154008-00570-0154108-00570-0155008-00570-0155108-00570-0156108-00570-0158108-00570-0159108-00570-0202108-00570-0202308-00570-0202208-00570-0204108-00570-0204308-00570-0204208-00570-0205108-00570-0205308-00570-0205208-00570-0206108-00570-02063
ShankDia.(d)
OverallLength
(L)
0.2
0.3
0.4
Neck Dia.(d2)
Lengh ofCut( )
4
4
4
50
50
50
12°
12°
12°
0.1
0.15
Effective WallGradient Angle
( )
Under NeckTaper Angle
( )Neck
Taper Angle( )
0.4
0.6
0.8
0°19'0°23'0°25'0°38'0°47'0°51'0°57'1°11'1°16'0°16'1°35'1°41'0°54'2°21'2°32'4°13'0°25'0°45'0°51'1°08'1°16'1°41'2°32'4°13'0°20'0°24'0°25'0°40'0°47'0°51'1°00'1°11'1°16'1°20'1°34'
It is possible to increase rigidity with the neck taper. The volume of depth of cut will be more than conventional en mills.
Unit [size : mm]
2°
3°
5°
30'
1°
1°30'
2°
42
4
35353535
0.620.530.740.960.530.570.570.640.6
0.710.640.78
08-00570-0206208-00570-0208108-00570-0208208-00570-0209208-00570-0252108-00570-0252208-00570-0254108-00570-0254208-00570-0255108-00570-0255208-00570-0256108-00570-02562
0.5 4 5012°
0.2
0.251
1°41'2°00'2°31'4°13'0°22'0°25'0°44'0°51'1°06'1°16'1°27'1°41'
When you order, indicate MRBTN230 (R) x (q) x ( ) ( ) is reference value.y°
MRBTN230MUGEN-COATING 2-Flute Long Neck Ball End Mill
Effective Wall Gradient Angle
Effe
ctiv
e Le
ngth
1(
)
MUGEN Coating Endmill Series
EN
DM
ILL
250
Code No. Radius(R)
EffectiveLength
( )Neck
Taper Angle(y)
08-00570-0258108-00570-0258208-00570-0259208-00570-0302108-00570-0302208-00570-0304008-00570-0304108-00570-0304308-00570-0304208-00570-0305108-00570-0305208-00570-0306108-00570-0306208-00570-0308108-00570-0308208-00570-0309208-00570-0402108-00570-0402208-00570-0404108-00570-0404208-00570-0405108-00570-0405208-00570-0406108-00570-0406208-00570-0408108-00570-0408208-00570-0502108-00570-0502208-00570-0502308-00570-0502408-00570-0503908-00570-0504008-00570-0504108-00570-0504408-00570-0504208-00570-0504508-00570-0504308-00570-0504608-00570-0504708-00570-0504908-00570-0505008-00570-0505108-00570-0505408-00570-0505208-00570-0505508-00570-05053
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d2)Lengh of
Cut( )
Effective WallGradient Angle
( )
Under NeckTaper Angle
( )Neck
Taper Angle( )
3°
5°
30'
1°
1°30'
2°
3°
5°
30'
1°
1°30'
2°
3°
30'
1°
1°30'
3
5
58456858686
8
8128
128
128
128
121015202568
1012151620222568
1012151620
0.710.921.20.670.720.70.730.770.840.80.960.941.071.11.311.790.910.981.021.161.141.341.251.531.471.891.141.231.311.411.141.211.281.351.451.491.631.71.81.211.311.421.521.681.731.94
0.5
0.6
0.8
1
4
4
4
4
50
50
5060506050605060506060
70
60
70
60
70
12°
12°
12°
12°
0.25
0.3
0.4
0.5
1
1.2
1.6
2
2°11'2°32'4°13'0°24'0°27'0°45'0°49'0°51'0°53'1°13'1°19'1°41'1°46'2°32'2°39'4°25'0°25'0°27'0°50'0°54'1°16'1°21'1°42'1°48'2°31'2°41'0°25'0°27'0°28'0°29'0°43'0°48'0°50'0°52'0°54'0°54'0°55'0°56'0°56'1°05'1°12'1°16'1°18'1°21'1°21'1°23'
It is possible to increase rigidity with the neck taper. The volume of depth of cut will be more than conventional en mills.
Unit [size : mm]
When you order, indicate MRBTN230 (R) x (q) x ( ) ( ) is reference value.y°
MRBTN230MUGEN-COATING 2-Flute Long Neck Ball End Mil
Effective Wall Gradient Angle
Effe
ctiv
e Le
ngth
1(
)
MUGEN Coating Endmill Series
EN
DM
ILL
251
Code No. (R)RRadius
EffectiveLength
( )Neck
Taper Angle(y)
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d2)Lengh of
Cut( )
Effective WallGradient Angle
( )
Under NeckTaper Angle
( )Neck
Taper Angle( )
1°30'
2°
3°
5°
30'
1°
1°30'
2°
3°
5°
30'
1°
1°30'
2°
3°
5°
30'
2.052.2
2.781.561.912.261.842.362.893.274.151.371.581.541.951.7
2.331.872.712.213.462.884.981.621.711.971.741.922.092.441.872.132.911.992.342.693.392.763.284.333.66
2.142.212.28
2225361015201015201520122412241224122412241224101530101520301015301015203015203015
28.7121620
08-00570-0505608-00570-0505708-00570-0505908-00570-0506108-00570-0506208-00570-0506308-00570-0508108-00570-0508208-00570-0508308-00570-0509208-00570-0509308-00570-0602108-00570-0602208-00570-0604108-00570-0604208-00570-0605108-00570-0605208-00570-0606108-00570-0606208-00570-0608108-00570-0608208-00570-0609108-00570-0609208-00570-0752008-00570-0752108-00570-0752208-00570-0754008-00570-0754108-00570-0754308-00570-0754208-00570-0755008-00570-0755108-00570-0755208-00570-0756008-00570-0756108-00570-0756308-00570-0756208-00570-0758108-00570-0758308-00570-0758208-00570-0759108-00570-0759208-00570-1001908-00570-1002008-00570-10021
1
1.2
1.5
2
4
6
4
646
4
6
4
6
4
12°
12°
1°24'1°24'1°26'1°41'1°48'1°51'2°31'2°41'2°46'4°28'4°37'0°25'0°28'0°51'0°55'1°16'1°23'1°41'1°51'2°32'2°46'4°13'4°37'0°23'0°25'0°28'0°45'0°51'0°53'0°55'1°08'1°16'1°23'1°31'1°41'1°46'1°51'2°32'2°39'2°46'4°13'4°36'0°21'0°24'0°25'
12°
12°
2
2.4
3
4
0.5
0.6
0.75
1
70
70
70
70
60
60
60
7060
7060
7060
7060
7060
70
70
70
70
70
70
70
60
60
60
60
60
60
60
60
It is possible to increase rigidity with the neck taper. The volume of depth of cut will be more than conventional en mills.
Unit [size : mm]
When you order, indicate MRBTN230 (R) x (q) x ( ) ( ) is reference value.y°
MRBTN230MUGEN-COATING 2-Flute Long Neck Ball End Mill
Effective Wall Gradient Angle
Effe
ctiv
e Le
ngth
1(
)
MUGEN Coating Endmill Series
EN
DM
ILL
252
Code No. Radius(R)
EffectiveLength
( )Neck
Taper Angle(y)
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d2)Lengh of
Cut( )
Effective WallGradient Angle
( )
Under NeckTaper Angle
( )Neck
Taper Angle( )
30'
1°
1°30'
2°
3°
5°
304012162025303540121620253035401216203040121620304020
26.838.2
2.452.632.282.422.562.732.913.083.262.422.632.843.1
3.363.623.892.562.843.123.824.512.843.263.684.735.774.868
08-00570-1002208-00570-1002308-00570-1003908-00570-1004008-00570-1004108-00570-1004408-00570-1004208-00570-1004508-00570-1004308-00570-1004908-00570-1005008-00570-1005108-00570-1005408-00570-1005208-00570-1005508-00570-1005308-00570-1005908-00570-1006008-00570-1006108-00570-1006208-00570-1006308-00570-1007908-00570-1008008-00570-1008108-00570-1008208-00570-1008308-00570-1009108-00570-1009208-00570-10093
2
7080
60
70
80
60
70
80
60
708060
70
8070
80
12°
-
1 4
0°27'0°28'0°43'0°48'0°51'0°53'0°54'0°55'0°55'1°05'1°12'1°16'1°19'1°21'1°22'1°23'1°27'1°36'1°41'1°48'1°51'2°11'2°24'2°31'2°41'2°46'4°13'4°25'4°36'
4
6
4
4
4
8
6
6
6
It is possible to increase rigidity with the neck taper. The volume of depth of cut will be more than conventional en mills. Unit [size : mm]
When you order, indicate MRBTN230 (R) x (q) x ( ) ( ) is reference value.y°
MRBTN230MUGEN-COATING 2-Flute Long Neck Ball End Mil
Effective Wall Gradient Angle
Effe
ctiv
e Le
ngth
1(
)
MUGEN Coating Endmill Series
EN
DM
ILL
253
30'
1°
1°30'
2°
3°
5°
30'
1°
152030405015203040501520304050152030
48.9203050
23.1204060204060
3.163.243.433.6
3.773.313.493.844.194.543.473.734.264.785.3
3.633.984.68
64.475.527.61
64.214.564.914.425.125.82
08-00570-1501808-00570-1501908-00570-1502008-00570-1502208-00570-1502108-00570-1503808-00570-1503908-00570-1504008-00570-1504208-00570-1504108-00570-1504808-00570-1504908-00570-1505008-00570-1505208-00570-1505108-00570-1505808-00570-1505908-00570-1506008-00570-1506108-00570-1507908-00570-1508008-00570-1508108-00570-1509108-00570-2001908-00570-2002008-00570-2002108-00570-2003908-00570-2004008-00570-20041
3
4
70
8090
70
8090
70
8090
70
9070
907070901107090110
12°
-
12°
-
12°
1.5
2
6
8
0°20'0°22'0°26'0°27'0°27'0°39'0°45'0°51'0°53'0°54'1°00'1°07'1°16'1°19'1°22'1°20'1°31'1°41'1°49'2°16'2°32'2°43'3°58'0°19'0°25'0°27'0°40'0°50'0°54'
86
6
6
Code No. Radius(R)
EffectiveLength
( )Neck
Taper Angle(y)
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d2)Lengh of
Cut( )
Effective WallGradient Angle
( )
Under NeckTaper Angle
( )Neck
Taper Angle( )
It is possible to increase rigidity with the neck taper. The volume of depth of cut will be more than conventional en mills. Unit [size : mm]
When you order, indicate MRBTN230 (R) x (q) x ( ) ( ) is reference value.y°
MRBTN230MUGEN-COATING 2-Flute Long Neck Ball End Mil
Effective Wall Gradient Angle
Effe
ctiv
e Le
ngth
1(
)
MUGEN Coating Endmill Series
EN
DM
ILL
254
Code No. Dia (D) Taper Angle( )
NeckTaper Angle
(y°)
0.2
0.3
0.4
0.5
30'1°
1°30'2°3°5°
10°30'1°
1°30'2°3°5°
10°30'1°
1°30'2°3°5°
10°30'1°
1°30'2°3°4°5°6°7°
10°15°20°
0.210.230.240.260.280.340.480.320.340.360.380.430.510.720.430.460.480.510.570.680.960.530.570.60.640.710.780.850.920.991.211.571.96
4
4
4
4
08-00300-0020208-00300-0020408-00300-0020508-00300-0020608-00300-0020808-00300-0021208-00300-0021908-00300-0030208-00300-0030408-00300-0030508-00300-0030608-00300-0030808-00300-0031208-00300-0031908-00300-0040208-00300-0040408-00300-0040508-00300-0040608-00300-0040808-00300-0041208-00300-0041908-00300-0050208-00300-0050408-00300-0050508-00300-0050608-00300-0050808-00300-0051008-00300-0051208-00300-0051408-00300-0051608-00300-0051908-00300-0052408-00300-00525
Shank Dia.(d)
OverallLength
(L)
45
45
45
45
Our original MUGEN-COATING has been put on 2-flute taper end mill.The tool life is longer at taper cutting.The dia. sizes are available 0.2 to 10 and the single angles are from 30' to 20° (less than dia. 6).
Dia atLang End
(d1)
Length ofCut( )
0.8
1.2
1.6
2
9°
-
9°
-
9°
-
9°
-
15°
Unit [size : mm]
When you order, indicate MTE230 (D) x ( ).
MTE230MUGEN-COATING 2-Flute Taper End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
255
Code No. Dia (D) Taper Angle( )
NeckTaper Angle
(y°)
Shank Dia.(d)
OverallLength
(L)
Dia atLang End
(d1)
Length ofCut( )
0.6
0.7
0.8
0.9
30'1°
1°30'2°3°4°5°6°7°
10°15°20°30'1°
1°30'2°3°4°5°6°7°
10°15°20°30'1°
1°30'2°3°4°5°6°7°
10°15°20°30'1°
1°30'2°3°4°5°6°7°
0.630.670.70.740.810.880.951.021.091.311.672.060.730.770.80.840.910.981.051.121.191.411.772.160.850.90.961.011.111.211.321.431.541.862.412.980.95
11.061.111.211.321.421.531.64
4
4
4
4
08-00300-0060208-00300-0060408-00300-0060508-00300-0060608-00300-0060808-00300-0061008-00300-0061208-00300-0061408-00300-0061608-00300-0061908-00300-0062408-00300-0062508-00300-0070208-00300-0070408-00300-0070508-00300-0070608-00300-0070808-00300-0071008-00300-0071208-00300-0071408-00300-0071608-00300-0071908-00300-0072408-00300-0072508-00300-0080208-00300-0080408-00300-0080508-00300-0080608-00300-0080808-00300-0081008-00300-0081208-00300-0081408-00300-0081608-00300-0081908-00300-0082408-00300-0082508-00300-0090208-00300-0090408-00300-0090508-00300-0090608-00300-0090808-00300-0091008-00300-0091208-00300-0091408-00300-00916
45
45
45
45
2
2
3
3
9°
-
15°
9°
-
15°
9°
-15°
-
9°
Our original MUGEN-COATING has been put on 2-flute taper end mill.The tool life is longer at taper cutting.The dia. sizes are available 0.2 to 10 and the single angles are from 30' to 20° (less than dia. 6). Unit [size : mm]
When you order, indicate MTE230 (D) x ( ).
MTE230MUGEN-COATING 2-Flute Taper End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
256
Code No. Dia (D) Taper Angle( )
NeckTaper Angle
(y°)
Shank Dia.(d)
OverallLength
(L)
Dia atLang End
(d1)
Length ofCut( )
0.9
1
1.5
2
10°15°20°30'1°
1°30'2°3°4°5°6°7°
10°15°20°30'1°
1°30'2°3°4°5°6°7°
10°15°20°30'1°
1°30'2°3°4°5°6°7°
10°15°20°
1.962.513.081.071.141.211.281.421.561.71.841.982.413.143.911.591.671.761.852.022.22.372.552.733.264.185.142.12.212.312.412.622.843.053.263.474.115.226.37
4
4
6
4
6
4
6
08-00300-0091908-00300-0092408-00300-0092508-00300-0100208-00300-0100408-00300-0100508-00300-0100608-00300-0100808-00300-0101008-00300-0101208-00300-0101408-00300-0101608-00300-0101908-00300-0102408-00300-0102508-00300-0150208-00300-0150408-00300-0150508-00300-0150608-00300-0150808-00300-0151008-00300-0151208-00300-0151408-00300-0151608-00300-0151908-00300-0152408-00300-0152508-00300-0200208-00300-0200408-00300-0200508-00300-0200608-00300-0200808-00300-0201008-00300-0201208-00300-0201408-00300-0201608-00300-0201908-00300-0202408-00300-02025
45
45
50
45
50
45
50
3
4
5
6
-15°
-
9°
-
15°
9°
-15-
9°
-
Our original MUGEN-COATING has been put on 2-flute taper end mill.The tool life is longer at taper cutting.The dia. sizes are available 0.2 to 10 and the single angles are from 30' to 20° (less than dia. 6).
Unit [size : mm]
When you order, indicate MTE230 (D) x ( ).
MTE230MUGEN-COATING 2-Flute Taper End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
257
Code No. Dia (D) Taper Angle( )
NeckTaper Angle
(y°)
Shank Dia.(d)
OverallLength
(L)
Dia atLang End
(d1)
Length ofCut( )
2.5
3
4
30'1°
1°30'2°3°4°5°6°7°
10°15°20°30'1°
1°30'2°3°4°5°6°7°
10°15°20°30'1°
1°30'2°3°4°5°6°7°
10°15°20°
2.642.782.913.053.333.623.9
4.184.465.326.798.323.173.353.523.694.054.4
4.755.1
5.466.538.3610.34.264.524.795.045.576.1
6.627.157.689.2912.0414.92
4
6
8
6
812
6
812
08-00300-0250208-00300-0250408-00300-0250508-00300-0250608-00300-0250808-00300-0251008-00300-0251208-00300-0251408-00300-0251608-00300-0251908-00300-0252408-00300-0252508-00300-0300208-00300-0300408-00300-0300508-00300-0300608-00300-0300808-00300-0301008-00300-0301208-00300-0301408-00300-0301608-00300-0301908-00300-0302408-00300-0302508-00300-0400208-00300-0400408-00300-0400508-00300-0400608-00300-0400808-00300-0401008-00300-0401208-00300-0401408-00300-0401608-00300-0401908-00300-0402408-00300-04025
45
50
60
50
55
6080
50
55
6080
8
10
15
9°
-
9
-
9
-
Our original MUGEN-COATING has been put on 2-flute taper end mill.The tool life is longer at taper cutting.The dia. sizes are available 0.2 to 10 and the single angles are from 30' to 20° (less than dia. 6).
Unit [size : mm]
When you order, indicate MTE230 (D) x ( ).
MTE230MUGEN-COATING 2-Flute Taper End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
258
Code No. Dia (D) Taper Angle( )
NeckTaper Angle
(y°)
Shank Dia.(d)
OverallLength
(L)
Dia atLang End
(d1)
Length ofCut( )
5
6
8
10
30'1°
1°30'2°3°4°5°6°7°
10°15°20°30'1°
1°30'2°3°4°5°6°7°
10°15°20°30'1°
1°30'2°3°5°30'1°
1°30'2°3°5°
5.345.76.046.397.17.88.59.29.9112.0515.7219.566.356.77.057.48.18.89.510.210.9113.0516.7220.568.448.879.319.7410.6212.3710.6111.2211.8312.4413.6716.12
6
8
10121620
6
8
121620
8
1012
10
12
16
08-00300-0500208-00300-0500408-00300-0500508-00300-0500608-00300-0500808-00300-0501008-00300-0501208-00300-0501408-00300-0501608-00300-0501908-00300-0502408-00300-0502508-00300-0600208-00300-0600408-00300-0600508-00300-0600608-00300-0600808-00300-0601008-00300-0601208-00300-0601408-00300-0601608-00300-0601908-00300-0602408-00300-0602508-00300-0800208-00300-0800408-00300-0800508-00300-0800608-00300-0800808-00300-0801208-00300-1000208-00300-1000408-00300-1000508-00300-1000608-00300-1000808-00300-10012
55
60
708090100
55
6065
70
8090100
65
7090
85
90
20
20
15
9
-
9
-
-
-
Our original MUGEN-COATING has been put on 2-flute taper end mill.The tool life is longer at taper cutting.The dia. sizes are available 0.2 to 10 and the single angles are from 30' to 20° (less than dia. 6).
Unit [size : mm]
When you order, indicate MTE230 (D) x ( ).
MTE230MUGEN-COATING 2-Flute Taper End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
259
Code No. Dia (D) Taper Angle( )
NeckTaper Angle
(y°)
0.2
0.3
0.4
0.5
0.6
0.7
0.8
30'1°
1°30'2°30'1°
1°30'2°30'1°
1°30'2°30'1°
1°30'2°30'1°
1°30'2°30'1°
1°30'2°30'1°
1°30'2°30'1°
1°30'2°30'1°
1°30'2°15'30'1°
1°30'2°15'30'1°
1°30'2°
0.230.270.30.340.350.40.460.510.470.540.610.680.570.640.710.780.60.710.810.920.670.740.810.880.70.810.911.020.80.911.011.120.840.981.121.260.830.870.941.011.080.850.91.011.111.22
3
3
3
3
3
3
4
08-00310-0202208-00310-0202308-00310-0202408-00310-0202508-00310-0303208-00310-0303308-00310-0303408-00310-0303508-00310-0404208-00310-0404308-00310-0404408-00310-0404508-00310-0504208-00310-0504308-00310-0504408-00310-0504508-00310-0506208-00310-0506308-00310-0506408-00310-0506508-00310-0604208-00310-0604308-00310-0604408-00310-0604508-00310-0606208-00310-0606308-00310-0606408-00310-0606508-00310-0706208-00310-0706308-00310-0706408-00310-0706508-00310-0708208-00310-0708308-00310-0708408-00310-0708508-00310-0804108-00310-0804208-00310-0804308-00310-0804408-00310-0804508-00310-0806108-00310-0806208-00310-0806308-00310-0806408-00310-08065
Shank Dia.(d)
OverallLength
(L)
40
40
40
40
40
40
45
45
Dia atLang End
(d1)
Length ofCut( )
2
3
4
4
6
4
6
6
8
4
6
15°
15°
15°
15°
15°
15°
15°
Unit [size : mm]
It is possble for high precision and efficiency cutting by NS original design.(y°) is reference value.When you order, indicate MRT425 (D) × ( ) × ( ).
MRT425MUGEN-COATING 4-Flute Taper End Mill for Deep Rip
MUGEN Coating Endmill Series
EN
DM
ILL
260
Code No. Dia (D) Taper Angle( )
NeckTaper Angle
(y°)
0.8
1
1.2
15'30'1°
1°30'2°15'30'1°
1°30'2°30'1°
1°30'2°15'30'1°
1°30'2°15'30'1°
1°30'2°15'30'1°
1°30'2°15'30'1°
1°30'2°1°
1°30'2°15'30'1°
1°30'2°
0.870.941.081.221.360.890.971.151.321.51.011.221.431.641.051.11.211.311.421.071.141.281.421.561.091.171.351.521.71.11.211.421.631.841.561.842.121.251.31.411.511.62
4
4
4
08-00310-0808108-00310-0808208-00310-0808308-00310-0808408-00310-0808508-00310-0810108-00310-0810208-00310-0810308-00310-0810408-00310-0810508-00310-0812208-00310-0812308-00310-0812408-00310-0812508-00310-1006108-00310-1006208-00310-1006308-00310-1006408-00310-1006508-00310-1008108-00310-1008208-00310-1008308-00310-1008408-00310-1008508-00310-1010108-00310-1010208-00310-1010308-00310-1010408-00310-1010508-00310-1012108-00310-1012208-00310-1012308-00310-1012408-00310-1012508-00310-1016308-00310-1016408-00310-1016508-00310-1206108-00310-1206208-00310-1206308-00310-1206408-00310-12065
Shank Dia.(d)
OverallLength
(L)
45
50
45
50
55
45
Dia atLang End
(d1)
Length ofCut( )
8
10
12
6
8
10
12
16
6
15°
.
15°
15°
Unit [size : mm]
It is possble for high precision and efficiency cutting by NS original design.(y°) is reference value.When you order, indicate MRT425 (D) × ( ) × ( ).
MRT425MUGEN-COATING 4-Flute Taper End Mill for Deep Rip
MUGEN Coating Endmill Series
EN
DM
ILL
261
Code No. Dia (D) Taper Angle( )
NeckTaper Angle
(y°)
Shank Dia.(d)
OverallLength
(L)
Dia atLang End
(d1)
Length ofCut( )
1.2
1.3
1.4
1.5
15'30'1°
1°30'2°15'30'1°
1°30'2°15'30'1°
1°30'2°1°
1°30'2°30'1°
1°30'2°30'1°
1°30'2°15'30'1°
1°30'2°15'30'1°
1°30'2°15'30'1°
1°30'2°
1.291.371.551.721.91.31.411.621.832.041.341.481.762.042.321.92.252.61.511.721.932.141.611.822.032.241.551.61.711.811.921.571.641.781.922.061.591.671.852.022.2
4
4
4
4
08-00310-1210108-00310-1210208-00310-1210308-00310-1210408-00310-1210508-00310-1212108-00310-1212208-00310-1212308-00310-1212408-00310-1212508-00310-1216108-00310-1216208-00310-1216308-00310-1216408-00310-1216508-00310-1220308-00310-1220408-00310-1220508-00310-1312208-00310-1312308-00310-1312408-00310-1312508-00310-1412208-00310-1412308-00310-1412408-00310-1412508-00310-1506108-00310-1506208-00310-1506308-00310-1506408-00310-1506508-00310-1508108-00310-1508208-00310-1508308-00310-1508408-00310-1508508-00310-1510108-00310-1510208-00310-1510308-00310-1510408-00310-15105
45
50
55
50
50
.
45
10
12
16
20
12
12
6
8
10
15°
15°
15º
15°
Unit [size : mm]
It is possble for high precision and efficiency cutting by NS original design.(y°) is reference value.When you order, indicate MRT425 (D) × ( ) × ( ).
MRT425MUGEN-COATING 4-Flute Taper End Mill for Deep Rip
MUGEN Coating Endmill Series
EN
DM
ILL
262
Code No. Dia (D) Taper Angle( )
NeckTaper Angle
(y°)
Shank Dia.(d)
OverallLength
(L)
Dia atLang End
(d1)
Length ofCut( )
1.5
1.6
1.8
4
4
4
50
55
60
45
50
55
45
55
60
12
16
20
25
8
12
16
20
8
16
24
15°
08-00310-1512108-00310-1512208-00310-1512308-00310-1512408-00310-1512508-00310-1516108-00310-1516208-00310-1516308-00310-1516408-00310-1516508-00310-1520108-00310-1520208-00310-1520308-00310-1520408-00310-1520508-00310-1525308-00310-1525408-00310-1525508-00310-1608208-00310-1608308-00310-1608408-00310-1608508-00310-1612208-00310-1612308-00310-1612408-00310-1612508-00310-1616208-00310-1616308-00310-1616408-00310-1616508-00310-1620208-00310-1620308-00310-1620408-00310-1620508-00310-1808108-00310-1808208-00310-1808308-00310-1808408-00310-1808508-00310-1816108-00310-1816208-00310-1816308-00310-1816408-00310-1816508-00310-18241
15'30'1°
1°30'2°15'30'1°
1°30'2°15'30'1°
1°30'2°1°
1°30'2°30'1°
1°302°30'1°
1°30'2°30'1°
1°30'2°30'1°
1°30'2°15'30'1°
1°30'2°15'30'1°
1°30'2°15'
1.61.711.922.132.341.641.782.062.342.621.671.852.22.552.92.372.813.251.741.882.022.161.812.022.232.441.882.162.442.721.952.32.65
31.871.942.082.222.361.942.082.362.642.922.01
Unit [size : mm]
It is possble for high precision and efficiency cutting by NS original design.(y°) is reference value.When you order, indicate MRT425 (D) × ( ) × ( ).
15°
15°
MRT425MUGEN-COATING 4-Flute Taper End Mill for Deep Rip
MUGEN Coating Endmill Series
EN
DM
ILL
263
Code No. Dia (D) Taper Angle( )
NeckTaper Angle
(y°)
Shank Dia.(d)
OverallLength
(L)
Dia atLang End
(d1)
Length ofCut( )
1.8
2
4
4
60
45
50
55
60
65
24
8
10
12
16
20
25
30
15°
15°
08-00310-1824208-00310-1824308-00310-1824408-00310-1824508-00310-2008108-00310-2008208-00310-2008308-00310-2008408-00310-2008508-00310-2010108-00310-2010208-00310-2010308-00310-2010408-00310-2010508-00310-2012108-00310-2012208-00310-2012308-00310-2012408-00310-2012508-00310-2012708-00310-2016108-00310-2016208-00310-2016308-00310-2016408-00310-2016508-00310-2016708-00310-2020108-00310-2020208-00310-2020308-00310-2020408-00310-2020508-00310-2020708-00310-2025108-00310-2025208-00310-2025308-00310-2025408-00310-2025508-00310-2025708-00310-2030208-00310-2030308-00310-2030408-00310-2030508-00310-20307
30'1°
1°30'2°15'30''1°
1°30'2°15'30'1°
1°30'2°15'30'1°
1°30'2°3°15'30'1°
1°30'2°3°15'30'1°
1°30'2°3°15'30'1°
1°30'2°3°30'1°
1°30'2°3°
2.222.643.063.482.072.142.282.422.562.092.172.352.522.72.12.212.422.632.843.262.142.282.562.843.123.682.172.352.73.053.44.12.222.442.873.313.754.622.523.053.574.15.14
6
6
6
Unit [size : mm]
It is possble for high precision and efficiency cutting by NS original design.(y°) is reference value.When you order, indicate MRT425 (D) × ( ) × ( ).
4
4
MRT425MUGEN-COATING 4-Flute Taper End Mill for Deep Rip
MUGEN Coating Endmill Series
EN
DM
ILL
264
Code No. Dia (D) Taper Angle( )
NeckTaper Angle
(y°)
Shank Dia.(d)
OverallLength
(L)
Dia atLang End
(d1)
Length ofCut( )
2.5
3
4
6
4
6
6
45
50
55
60
65
65
80
10
16
20
25
30
25
40
15°
15°
08-00310-2510208-00310-2510308-00310-2510408-00310-2510508-00310-2516208-00310-2516308-00310-2516408-00310-2516508-00310-2520208-00310-2520308-00310-2520408-00310-2520508-00310-2525208-00310-2525308-00310-2525408-00310-2525508-00310-2530208-00310-2530308-00310-2530408-00310-2530508-00310-3025208-00310-3025308-00310-3025408-00310-3025508-00310-3040208-00310-3040308-00310-3040408-00310-30405
30'1°
1°30'2°30'1°
1°30'2°30'1°
1°30'2°30'1°
1°30'2°30'1°
1°30'2°30'1°
1°30'2°30'1°
1°30'2°
2.672.853.023.22.783.063.343.622.853.23.553.92.943.373.814.253.023.554.074.63.443.874.314.753.74.45.095.79
Unit [size : mm]
It is possble for high precision and efficiency cutting by NS original design.(y°) is reference value.When you order, indicate MRT425 (D) × ( ) × ( ).
MRT425MUGEN-COATING 4-Flute Taper End Mill for Deep Rip
MUGEN Coating Endmill Series
EN
DM
ILL
265
Code No. Radius(R)
Taper Angle( )
NeckTaper Angle
(y°)
0.1
0.15
0.2
0.25
0.3
1°2°3°5°7°
10°1°2°3°5°7°
10°15°1°2°3°5°7°
10°15°1°2°3°5°7°
10°15°1°2°3°5°7°
10°15°
0.230.260.290.360.420.520.350.390.440.540.630.781.030.460.530.590.720.841.041.380.580.660.740.91.061.31.720.690.790.881.071.271.562.07
4
4
4
4
4
08-00540-0100408-00540-0100608-00540-0100808-00540-0101208-00540-0101608-00540-0101908-00540-0150408-00540-0150608-00540-0150808-00540-0151208-00540-0151608-00540-0151908-00540-0152408-00540-0200408-00540-0200608-00540-0200808-00540-0201208-00540-0201608-00540-0201908-00540-0202408-00540-0250408-00540-0250608-00540-0250808-00540-0251208-00540-0251608-00540-0251908-00540-0252408-00540-0300408-00540-0300608-00540-0300808-00540-0301208-00540-0301608-00540-0301908-00540-03024
Shank Dia.(d)
OverallLength
(L)
50
50
50
50
50
It is possible to cut both taper and ball simultaneously.The available sizes are from radius 0.1 and single angles up to 15°.
Dia atLang End
(d1)
Length ofCut( )
1
1.5
2
2.5
3
9°
10°
9°
10°15°
9°
10°15°
9°
10°15°
9°
10°15°
Unit [size : mm]
When you order, indicate MTB230 (D) x ( ).
MTB230MUGEN-COATING 2-Flute Taper Ball End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
266
Code No. Radius(R)
Taper Angle( )
NeckTaper Angle
(y°)
08-00540-0350408-00540-0350608-00540-0350808-00540-0351208-00540-0351608-00540-0351908-00540-0352408-00540-0400408-00540-0400608-00540-0400808-00540-0401208-00540-0401608-00540-0401908-00540-0402408-00540-0450408-00540-0450608-00540-0450808-00540-0451208-00540-0451608-00540-0451908-00540-0452408-00540-0500408-00540-0500608-00540-0500808-00540-0501208-00540-0501608-00540-0501908-00540-0502408-00540-0600408-00540-0600608-00540-0600808-00540-0601208-00540-0601608-00540-0601908-00540-0602408-00540-0750408-00540-0750608-00540-0750808-00540-0751208-00540-0751608-00540-0751908-00540-0752408-00540-0800408-00540-08006
Shank Dia.(d)
OverallLength
(L)
Dia atLang End
(d1)
Length ofCut( )
0.35
0.4
0.45
0.5
0.6
0.75
0.8
1°2°3°5°7°
10°15°1°2°3°5°7°
10°15°1°2°3°5°7°
10°15°1°2°3°5°7°
10°15°1°2°3°5°7°
10°15°1°2°3°5°7°
10°15°1°2°
0.810.921.031.251.481.822.410.931.051.181.431.692.082.761.021.151.271.521.742.172.831.121.251.371.621.872.252.911.351.51.661.972.292.773.61.681.872.052.422.83.374.371.781.96
4
4
4
4
4
4
4
50
50
50
55
55
55
55
3.5
4
4
4
5
6
6
9°
10°15°
9°
10°15°
9°
10°15°
9°
10°15°
9°
10°15°
9°
10°-
9°
When you order, indicate MTB230 (D) x ( ).
It is possible to cut both taper and ball simultaneously.The available sizes are from radius 0.1 and single angles up to 15°. Unit [size : mm]
MTB230MUGEN-COATING 2-Flute Taper Ball End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
267
Code No. Radius(R)
Taper Angle( )
NeckTaper Angle
(y°)
0.8
1
1.25
1.5
2
3°5°7°
10°15°1°2°3°5°7°
10°15°1°2°3°5°7°
10°15°1°2°3°5°7°
10°15°1°2°3°5°7°
10°15°
2.152.522.893.464.442.242.492.743.233.734.55.822.813.113.424.044.675.627.283.373.744.14.855.66.758.734.494.985.476.467.47
911.64
4
4
6
4
6
4
6
8
6
8
10
08-00540-0800808-00540-0801208-00540-0801608-00540-0801908-00540-0802408-00540-1000408-00540-1000608-00540-1000808-00540-1001208-00540-1001608-00540-1001908-00540-1002408-00540-1250408-00540-1250608-00540-1250808-00540-1251208-00540-1251608-00540-1251908-00540-1252408-00540-1500408-00540-1500608-00540-1500808-00540-1501208-00540-1501608-00540-1501908-00540-1502408-00540-2000408-00540-2000608-00540-2000808-00540-2001208-00540-2001608-00540-2001908-00540-20024
Shank Dia.(d)
OverallLength
(L)
55
60
60
60
65
70
Dia atLang End
(d1)
Length ofCut( )
6
8
10
12
16
9°
10°-
9°
7°10°15°
9°
-
9°-
9°
-
9°
-
It is possible to cut both taper and ball simultaneously.The available sizes are from radius 0.1 and single angles up to 15°.
Unit [size : mm]
When you order, indicate MTB230 (D) x ( ).
MTB230MUGEN-COATING 2-Flute Taper Ball End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
268
Code No. Dia (D) Corner Radius(R)
NeckTaper Angle
(y°)
1
1.5
2
2.5
3
4
5
0.10.20.30.10.20.30.50.10.20.30.50.10.20.30.50.10.20.30.51
0.10.20.30.51
0.10.20.30.51
1.5
2
3
4
5
6
8
10
4
4
4
4
6
6
6
08-00700-0100108-00700-0100208-00700-0100308-00700-0150108-00700-0150208-00700-0150308-00700-0150508-00700-0200108-00700-0200208-00700-0200308-00700-0200508-00700-0250108-00700-0250208-00700-0250308-00700-0250508-00700-0300108-00700-0300208-00700-0300308-00700-0300508-00700-0301008-00700-0400108-00700-0400208-00700-0400308-00700-0400508-00700-0401008-00700-0500108-00700-0500208-00700-0500308-00700-0500508-00700-0501008-00700-05015
Shank Dia.(d)
Overall Length(L)
60
60
60
60
60
65
70
It is possible to cut both straight and corner radius simultaneously.It is very suitable for high speed cutting because the length of cut is short.
Length of Cut( )
9°
9°
9°
9°
9°
9°
9°
Unit [size : mm]
When you order, indicate MSRS230 (D) x (R). ( ) is reference value.y°
MSRS230MUGEN-COATING 2-Flute Redius End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
269
Code No. Dia(D)
Lengthof Cut
( )Length of
Cut
6
8
10
0.10.20.30.51
1.52
0.10.20.51
1.52
2.53
0.10.20.30.51
1.52
2.53
12
16
20
6
8
10
08-00710-0600108-00710-0600208-00710-0600308-00710-0600508-00710-0601008-00710-0601508-00710-0602008-00710-0800108-00710-0800208-00710-0800508-00710-0801008-00710-0801508-00710-0802008-00710-0802508-00710-0803008-00710-1000108-00710-1000208-00710-1000308-00710-1000508-00710-1001008-00710-1001508-00710-1002008-00710-1002508-00710-10030
ShankDia.(d)
OverallLength
(L)
80
90
100
It is possible to cut both straight and corner radius simultaneously.It is very suitable for high speed cutting because the length of cut is short.
Code No. Dia(D)
Lengthof Cut
( )Length of
Cut
12
0.10.20.30.51
1.52
2.53
24 12
08-00710-1200108-00710-1200208-00710-1200308-00710-1200508-00710-1201008-00710-1201508-00710-1202008-00710-1202508-00710-12030
ShankDia.(d)
OverallLength
(L)
110
Unit [size : mm]
When you order, indicate MSRS430 (D) x (R). ( ) is reference value.y°
MSRS430MUGEN-COATING 4-Flute Redius End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
270
Minimized chattering by peripheral cutting edge designed for minimal interference to work material.Realized high efficiency milling by obtaining larger radial depth of cutting comparing with Ball End Mill.Corner R accuracy : ±5μm (2.5D and below)Upgraded Mugen-Coating brings outstanding performance for milling of Prehardened Steel andCopper Electrode as well.
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.05
0.05
0.05
0.1
0.05
0.1
0.05
0.1
0.05
0.1
0.05
0.1
0.511223423423452345246464646468468
08-00220-0200108-00220-0200208-00220-0300108-00220-0300208-00220-0400508-00220-0400608-00220-0400708-00220-0401108-00220-0401308-00220-0401208-00220-0500508-00220-0500608-00220-0500708-00220-0500808-00220-0501108-00220-0501308-00220-0501208-00220-0501408-00220-0600508-00220-0600708-00220-0600908-00220-0601108-00220-0601208-00220-0700508-00220-0700608-00220-0701108-00220-0701208-00220-0800508-00220-0800608-00220-0800708-00220-0801108-00220-0801208-00220-08013
ShankDia.(d)
OverallLength
(L)
0.18
0.28
0.37
0.46
0.56
0.66
0.76
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
6
6
6
6
6
6
6
50
50
50
50
50
50
50
0.56
1.08
1.08
2.13
2.15
3.19
4.24
2.15
3.19
4.24
2.18
3.22
4.26
5.31
2.17
3.22
4.26
5.3
2.18
4.26
6.35
4.26
6.35
4.26
6.35
4.26
6.35
4.26
6.35
8.43
4.26
6.35
8.43
0.59
1.13
1.13
2.22
2.25
3.34
4.43
2.24
3.33
4.42
2.27
3.36
4.45
5.54
2.27
3.36
4.45
5.54
2.27
4.45
6.63
4.45
6.63
4.45
6.63
4.45
6.63
4.45
6.63
8.81
4.45
6.63
8.8
0.61
1.18
1.18
2.32
2.35
3.49
4.63
2.34
3.48
4.62
2.38
3.52
4.66
5.8
2.37
3.51
4.65
5.79
2.38
4.66
6.94
4.65
6.93
4.66
6.94
4.65
6.93
4.66
6.94
9.22
4.65
6.93
9.21
0.64
1.24
1.24
2.43
2.46
3.66
4.86
2.45
3.65
4.85
2.49
3.69
4.88
6.08
2.48
3.68
4.87
6.07
2.49
4.88
7.28
4.87
7.27
4.88
7.28
4.87
7.27
4.88
7.28
9.67
4.87
7.27
9.66
0.71
1.37
1.37
2.7
2.73
4.05
5.38
2.71
4.04
5.37
2.76
4.09
5.41
6.74
2.74
4.07
5.4
6.72
2.76
5.41
8.07
5.4
8.05
5.41
8.07
5.4
8.05
5.41
8.07
10.72
5.4
8.05
10.71
CornerRadius
(R)
12°
12°
12°
12°
12°
12°
12°
0.15
0.25
0.3
0.4
0.5
0.55
0.65
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
When you order, indicate MHR230R (D) x (R) x ( ). ( ) is reference value.y°
MHR230RMUGEN-COATING 2-Flute Long Neck Redius End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
271
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
4684834568
101234568
101234568
101234568
1012
08-00220-0802108-00220-0802208-00220-0802308-00220-0901108-00220-0901208-00220-1000108-00220-1000208-00220-1000308-00220-1000408-00220-1000608-00220-1000808-00220-1000908-00220-1001008-00220-1001108-00220-1001408-00220-1001508-00220-1001208-00220-1001608-00220-1001308-00220-1002408-00220-1002108-00220-1002508-00220-1002608-00220-1002208-00220-1002708-00220-1002308-00220-1003408-00220-1003108-00220-1003508-00220-1003608-00220-1003208-00220-1003708-00220-10033
ShankDia.(d)
OverallLength
(L)
0.76
0.86
0.95
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
CornerRadius
(R)
0.8
0.9
1
0.2
0.1
0.05
0.1
0.2
0.3
0.65
0.7
0.8
12°
12°
12°
6
6
6
50
50
50
4.26
6.34
8.43
4.26
8.43
3.24
4.29
5.33
6.37
8.46
10.54
12.63
3.24
4.28
5.33
6.37
8.46
10.54
12.63
3.24
4.28
5.32
6.37
8.45
10.54
12.62
3.23
4.28
5.32
6.36
8.45
10.53
12.62
4.44
6.62
8.8
4.45
8.8
3.39
4.48
5.57
6.66
8.83
11.01
13.19
3.38
4.47
5.56
6.65
8.83
11.01
13.19
3.37
4.46
5.55
6.64
8.82
11
13.18
3.36
4.45
5.54
6.63
8.81
10.99
13.17
4.64
6.92
9.2
4.65
9.21
3.54
4.68
5.82
6.97
9.25
11.53
13.81
3.54
4.68
5.82
6.96
9.24
11.52
13.8
3.52
4.66
5.8
6.94
9.23
11.51
13.79
3.51
4.65
5.79
6.93
9.21
11.49
13.77
4.86
7.25
9.64
4.87
9.66
3.72
4.91
6.11
7.31
9.7
12.09
14.49
3.71
4.9
6.1
7.3
9.69
12.08
14.48
3.69
4.88
6.08
7.28
9.67
12.06
14.46
3.67
4.86
6.06
7.26
9.65
12.04
14.44
5.37
8.02
10.67
5.4
10.71
4.12
5.44
6.77
8.1
10.75
13.41
16.06
4.1
5.43
6.76
8.08
10.74
13.39
16.05
4.07
5.4
6.72
8.05
10.71
13.36
16.01
4.04
5.36
6.69
8.02
10.67
13.33
15.98
Minimized chattering by peripheral cutting edge designed for minimal interference to work material.Realized high efficiency milling by obtaining larger radial depth of cutting comparing with Ball End Mill.Corner R accuracy : ±5μm (2.5D and below)Upgraded Mugen-Coating brings outstanding performance for milling of Prehardened Steel andCopper Electrode as well.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
When you order, indicate MHR230R (D) x (R) x ( ). ( ) is reference value.y°
MHR230RMUGEN-COATING 2-Flute Long Neck Redius End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
272
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
510155
10155
10156
12186
12186
12186
12188
121620248
12162024
08-00220-1201108-00220-1201308-00220-1201508-00220-1202108-00220-1202208-00220-1202308-00220-1203108-00220-1203208-00220-1203308-00220-1501108-00220-1501308-00220-1501508-00220-1502108-00220-1502308-00220-1502508-00220-1503108-00220-1503208-00220-1503308-00220-1505108-00220-1505208-00220-1505308-00220-2001108-00220-2001408-00220-2001208-00220-2001508-00220-2001308-00220-2002108-00220-2002308-00220-2002508-00220-2002708-00220-20029
ShankDia.(d)
OverallLength
(L)
1.15
1.45
1.94
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
CornerRadius
(R)
1.2
1.5
2
0.1
0.2
0.3
0.1
0.2
0.3
0.5
0.1
0.2
1
1.2
1.6
50
60
50
60
50
60
50
60
50
60
50
6050
6050
60
7050
60
70
5.33
10.54
15.76
5.32
10.54
15.75
5.32
10.53
15.75
6.37
12.63
18.88
6.37
12.62
18.88
6.36
12.62
18.88
6.35
12.61
18.87
8.48
12.65
16.82
20.99
25.17
8.48
12.65
16.82
20.99
25.16
5.56
11.01
16.46
5.55
11
16.45
5.54
10.99
16.44
6.65
13.19
19.72
6.64
13.18
19.72
6.63
13.17
19.71
6.62
13.15
19.69
8.86
13.21
17.57
21.93
26.29
8.85
13.2
17.56
21.92
26.28
5.82
11.52
17.22
5.8
11.51
17.21
5.79
11.49
17.2
6.96
13.8
20.46
6.94
13.79
20.63
6.93
13.77
20.62
6.9
13.75
20.59
9.27
13.83
18.39
22.95
27.51
9.25
13.81
18.38
22.94
27.5
6.1
12.08
18.07
6.08
12.06
18.05
6.06
12.04
18.03
7.3
14.48
21.65
7.28
14.46
21.64
7.26
14.44
21.62
7.22
14.4
21.58
9.72
14.5
19.29
24.08
28.86
9.7
14.48
19.27
24.06
28.84
6.76
13.39
20.03
6.72
13.36
20
6.69
13.33
19.96
8.08
16.05
24.01
8.05
16.01
23.98
8.02
15.98
23.95
7.96
15.92
23.38
10.77
16.08
21.39
26.7
32
10.74
16.05
21.35
26.66
31.97
12°
1.2°
1.2°
6
6
6
Minimized chattering by peripheral cutting edge designed for minimal interference to work material.Realized high efficiency milling by obtaining larger radial depth of cutting comparing with Ball End Mill.Corner R accuracy : ±5 m (2.5D and below)Upgraded Mugen-Coating brings outstanding performance for milling of Prehardened Steel andCopper Electrode as well.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
When you order, indicate MHR230R (D) x (R) x ( ). ( ) is reference value.y°
MHR230RMUGEN-COATING 2-Flute Long Neck Redius End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
273
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
8121620248
12162024102030102030102030102030121824303612182430361218243036121824
08-00220-2003108-00220-2003408-00220-2003208-00220-2003508-00220-2003308-00220-2005108-00220-2005408-00220-2005208-00220-2005508-00220-2005308-00220-2501108-00220-2501308-00220-2501508-00220-2502108-00220-2502308-00220-2502508-00220-2503108-00220-2503208-00220-2503308-00220-2505108-00220-2505208-00220-2505308-00220-3001108-00220-3001308-00220-3001508-00220-3001708-00220-3001908-00220-3002108-00220-3002308-00220-3002508-00220-3002708-00220-3002908-00220-3003108-00220-3003408-00220-3003208-00220-3003508-00220-3003308-00220-3005108-00220-3005408-00220-30052
ShankDia.(d)
OverallLength
(L)
1.94
2.4
2.85
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.30' 1° 1°30' 2° 3°
CornerRadius
(R)
2
2.5
3
0.3
0.5
0.1
0.2
0.3
0.5
0.1
0.2
0.3
0.5
1.6
2
4.5
50
60
70
50
60
705060705060705060705060705060
70
805060
70
805060
70
80506070
8.47
12.64
16.81
20.99
25.16
8.46
12.63
16.81
20.98
25.15
10.66
21.09
31.52
10.66
21.09
31.52
10.66
21.08
31.51
10.65
21.08
31.5
12.87
19.13
25.39
31.64
37.9
12.87
19.13
25.38
31.64
37.9
12.86
19.12
25.38
31.63
37.89
12.86
19.11
25.37
8.84
13.2
17.55
21.91
26.27
8.82
13.18
17.54
21.89
26.25
11.14
22.03
32.93
11.13
22.02
32.92
11.12
22.01
32.91
11.1
22
32.89
13.44
19.98
26.52
33.05
39.59
13.44
19.97
26.51
33.05
39.58
13.43
19.96
26.5
33.04
39.57
13.41
19.95
26.48
9.24
13.8
18.36
22.29
27.49
9.21
13.77
18.33
22.9
27.46
11.65
23.06
34.46
11.64
23.05
34.45
11.63
23.03
34.44
11.6
23
34.41
14.07
20.91
27.76
34.6
41.44
14.06
20.9
27.74
34.58
41.43
14.04
20.88
27.73
34.57
41.41
14.01
20.86
27.7
9.68
14.46
19.25
24.04
28.82
9.64
14.43
19.21
24
28.79
12.22
24.19
36.15
12.2
24.17
36.14
12.18
24.15
36.12
12.15
24.11
36.08
14.76
21.94
29.12
36.3
43.48
14.74
21.92
29.1
36.28
43.46
14.72
21.9
29.08
36.26
43.44
14.68
21.86
29.04
10.7
16.01
21.32
26.63
31.94
10.64
15.95
21.26
26.57
31.88
13.55
26.82
Free
13.52
26.79
Free
13.48
26.76
Free
13.42
26.69
Free
16.36
24.32
Free
Free
Free
16.33
24.29
Free
Free
Free
16.29
24.26
Free
Free
Free
16.23
24.19
Free
12°
1.2°
1.2°
6
6
6
Minimized chattering by peripheral cutting edge designed for minimal interference to work material.Realized high efficiency milling by obtaining larger radial depth of cutting comparing with Ball End Mill.Corner R accuracy : ±5μm (2.5D and below)Upgraded Mugen-Coating brings outstanding performance for milling of Prehardened Steel andCopper Electrode as well.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
When you order, indicate MHR230R (D) x (R) x ( ). ( ) is reference value.y°
MHR230RMUGEN-COATING 2-Flute Long Neck Redius End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
274
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
30361218243036162432481624324816243248162432481624324820402040204020402040
08-00220-3005508-00220-3005308-00220-3010108-00220-3010408-00220-3010208-00220-3010508-00220-3010308-00220-4001108-00220-4001308-00220-4001508-00220-4001708-00220-4002108-00220-4002308-00220-4002508-00220-4002708-00220-4003108-00220-4003408-00220-4003208-00220-4003308-00220-4005108-00220-4005408-00220-4005208-00220-4005308-00220-4010108-00220-4010408-00220-4010208-00220-4010308-00220-5001108-00220-5001308-00220-5002108-00220-5002308-00220-5003108-00220-5003208-00220-5005108-00220-5005208-00220-5010108-00220-50102
ShankDia.(d)
OverallLength
(L)
2.85
3.8
4.8
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
CornerRadius
(R)
3
4
5
0.5
1
0.1
0.2
0.3
0.5
1
0.1
0.2
0.3
0.5
1
4.5
6
7.5
70805060
70
8060
70
10060
70
10060
70
10060
70
10060
70
10070907090709070907090
31.63
37.88
12.83
19.09
25.35
31.6
37.86
17.17
25.51
33.85
50.54
17.16
25.5
33.85
50.53
17.16
25.5
33.84
50.53
17.15
25.49
33.83
50.52
17.13
25.47
33.81
50.5
21.34
42.19
21.33
42.19
21.33
42.19
21.32
42.18
21.3
42.16
33.02
39.56
13.36
19.9
26.44
32.97
39.51
17.93
26.65
35.36
52.79
17.92
26.64
35.35
52.78
17.91
26.63
35.34
52.78
17.89
26.61
35.33
52.76
17.85
26.57
35.28
52.71
22.29
Free
22.28
Free
22.27
Free
22.25
Free
22.21
Free
34.54
41.39
13.94
20.79
27.63
34.47
41.32
18.77
27.89
37.01
Free
18.75
27.88
37
Free
18.74
27.86
36.99
Free
18.71
27.83
36.96
Free
18.64
27.77
36.89
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
36.22
43.4
14.58
21.76
28.94
36.12
43.3
19.68
29.26
Free
Free
19.66
29.24
Free
Free
19.65
29.22
Free
Free
19.61
29.18
Free
Free
19.51
29.08
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
16.07
24.04
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
12°
1.2°
1.2°
6
6
6
Minimized chattering by peripheral cutting edge designed for minimal interference to work material.Realized high efficiency milling by obtaining larger radial depth of cutting comparing with Ball End Mill.Corner R accuracy : ±5μm (2.5D and below)Upgraded Mugen-Coating brings outstanding performance for milling of Prehardened Steel andCopper Electrode as well.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
When you order, indicate MHR230R (D) x (R) x ( ). ( ) is reference value.y°
MHR230RMUGEN-COATING 2-Flute Long Neck Redius End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
275
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
24482448244824482448
08-00220-6001108-00220-6001308-00220-6002108-00220-6002308-00220-6003108-00220-6003208-00220-6005108-00220-6005208-00220-6010108-00220-60102
ShankDia.(d)
OverallLength
(L)
5.8
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
CornerRadius
(R)
6 9
90
110
90
110
90
110
90
110
90
110
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
- 6
Minimized chattering by peripheral cutting edge designed for minimal interference to work material.Realized high efficiency milling by obtaining larger radial depth of cutting comparing with Ball End Mill.Corner R accuracy : ±5μm (2.5D and below)Upgraded Mugen-Coating brings outstanding performance for milling of Prehardened Steel andCopper Electrode as well.
Act
ual E
ffect
ive
Inclined Angle
Unit [size : mm]
When you order, indicate MHR230R (D) x (R) x ( ). ( ) is reference value.y°
0.1
0.2
0.3
0.5
1
MHR230RMUGEN-COATING 2-Flute Long Neck Redius End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
276
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
34568
101234568
101234568
101234568
10125
10155
10155
1015
08-00230-1002108-00230-1002208-00230-1002308-00230-1002408-00230-1002508-00230-1002608-00230-1002708-00230-1003108-00230-1003208-00230-1003308-00230-1003408-00230-1003508-00230-1003608-00230-1003708-00230-1004108-00230-1004208-00230-1004308-00230-1004408-00230-1004508-00230-1004608-00230-1004708-00230-1005108-00230-1005208-00230-1005308-00230-1005408-00230-1005508-00230-1005608-00230-1005708-00230-1203108-00230-1203208-00230-1203308-00230-1204108-00230-1204208-00230-1204308-00230-1205108-00230-1205208-00230-12053
ShankDia.(d)
OverallLength
(L)
0.95
1.15
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
CornerRadius
(R)
1
1.2
0.05
0.1
0.2
0.3
0.1
0.2
0.3
8
1
50
3.26
4.3
5.34
6.38
8.47
10.56
12.64
3.25
4.3
5.34
6.38
8.47
10.55
12.64
3.25
4.29
5.34
6.38
8.46
10.55
12.64
3.25
4.29
5.33
6.37
8.46
10.55
12.63
5.36
10.58
15.79
5.36
10.57
15.79
5.36
10.57
15.78
3.4
4.49
5.58
6.67
8.85
11.03
13.21
3.4
4.48
5.57
6.66
8.84
11.02
13.2
3.39
4.48
5.57
6.66
8.83
11.01
13.19
3.38
4.47
5.56
6.65
8.83
11
13.18
5.6
11.05
16.49
5.59
11.04
16.49
5.58
11.03
16.48
3.56
4.7
5.84
6.98
9.26
11.54
13.82
3.55
4.69
5.83
6.97
9.25
11.53
13.81
3.54
4.68
5.82
6.96
9.24
11.52
13.8
3.52
4.66
5.8
6.94
9.22
11.51
13.79
5.86
11.56
17.26
5.84
11.55
17.25
5.83
11.53
17.24
3.73
4.93
6.12
7.32
9.71
12.11
14.5
3.72
4.92
6.11
7.31
9.7
12.1
14.49
3.7
4.9
6.09
7.29
9.68
12.08
14.47
3.68
4.88
6.07
7.27
9.66
12.06
14.45
6.14
12.12
18.11
6.12
12.11
18.09
6.1
12.09
18.07
4.13
5.46
6.79
8.11
10.77
13.42
16.08
4.12
5.44
6.77
8.1
10.75
13.41
16.06
4.08
5.41
6.74
8.07
10.72
13.38
16.03
4.05
5.38
6.71
8.03
10.69
13.34
16
6.8
13.44
20.07
6.77
13.41
20.04
6.74
13.37
20.01
12°
12°
4
4
Enhanced selectivity for machining process in all 146 sizes.Employing short flute length. Less interference to work material reduces chattering.Corner R accuracy : ±5μm (2.5D and below)Upgraded Mugen-Coating brings outstanding performance for milling of Prehardened Steels and Copper Electrodeas well.
50
60
50
60
50
60
Unit [size : mm]
When you order, indicate MHR430R (D) x (R) x ( ).( y°) is reference value.
MHR430RMUGEN-COATING 4-Flute Long Neck Redius End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
277
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
612186
12186
12186
12188
121620248
121620248
121620248
12162024102030102030102030102030
08-00230-1503108-00230-1503208-00230-1503308-00230-1504108-00230-1504208-00230-1504308-00230-1505108-00230-1505208-00230-1505308-00230-1506108-00230-1506208-00230-1506308-00230-2003108-00230-2003208-00230-2003308-00230-2003408-00230-2003508-00230-2004108-00230-2004208-00230-2004308-00230-2004408-00230-2004508-00230-2005108-00230-2005208-00230-2005308-00230-2005408-00230-2005508-00230-2006108-00230-2006208-00230-2006308-00230-2006408-00230-2006508-00230-2503108-00230-2503208-00230-2503308-00230-2504108-00230-2504208-00230-2504308-00230-2505108-00230-2505208-00230-2505308-00230-2506108-00230-2506208-00230-25063
ShankDia.(d)
OverallLength
(L)
1.45
1.94
2.4
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
CornerRadius
(R)
1.5
2
2.5
0.1
0.2
0.3
0.5
0.1
0.2
0.3
0.5
0.1
0.2
0.3
0.5
1.2
1.6
2
50
60
50
60
50
60
50
60
50
60
70
50
60
70
50
60
70
50
60
70506070506070506070506070
6.42
12.68
18.93
6.42
12.67
18.93
6.41
12.67
18.92
6.4
12.66
18.92
8.55
12.73
16.9
21.07
25.24
8.55
12.72
16.89
21.06
25.23
8.55
12.72
16.89
21.06
25.23
8.54
12.71
16.88
21.05
25.22
10.66
21.09
31.52
10.66
21.09
31.52
10.66
21.08
31.51
10.65
21.08
31.5
6.7
13.24
19.78
6.69
13.23
19.77
6.68
13.22
19.76
6.67
13.2
19.74
8.93
13.29
17.65
22.01
26.36
8.92
13.28
17.64
22
26.36
8.91
13.27
17.63
21.99
26.35
8.9
13.25
17.61
21.97
26.33
11.14
22.03
32.93
11.13
22.02
32.92
11.12
22.01
32.91
11.1
22
32.89
7.01
13.85
20.7
7
13.84
20.68
6.98
13.83
20.67
6.96
13.8
20.64
9.35
13.91
18.47
23.03
27.59
9.33
13.89
18.46
23.02
27.58
9.32
13.88
18.44
23
27.57
9.29
13.85
18.42
22.98
27.54
11.65
23.06
Free
11.64
23.05
Free
11.63
23.03
Free
11.6
23
Free
7.35
14.53
21.71
7.33
14.51
21.69
7.31
14.49
21.67
7.27
14.45
21.63
9.8
14.59
19.37
24.16
28.95
9.78
14.57
19.36
24.14
28.93
9.76
14.55
19.34
24.12
28.91
9.72
14.51
19.3
24.08
28.87
12.22
Free
Free
12.2
Free
Free
12.18
Free
Free
12.15
Free
Free
8.15
16.11
24.07
8.11
16.08
24.04
8.08
16.04
24.01
8.02
15.98
23.94
10.86
16.17
Free
Free
Free
10.83
16.14
Free
Free
Free
10.8
16.11
Free
Free
Free
10.73
16.04
Free
Free
Free
13.55
Free
Free
13.52
Free
Free
13.48
Free
Free
13.42
Free
Free
12°
12°
12°
4
4
4
Enhanced selectivity for machining process in all 146 sizes.Employing short flute length. Less interference to work material reduces chattering.Corner R accuracy : ±5μm (2.5D and below)Upgraded Mugen-Coating brings outstanding performance for milling of Prehardened Steels and Copper Electrodeas well. Unit [size : mm]
When you order, indicate MHR430R (D) x (R) x ( ).( y°) is reference value.
MHR430RMUGEN-COATING 4-Flute Long Neck Redius End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
278
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
12182430361218243036122024303612202430361220243036162432481624324816243248
08-00230-3003108-00230-3003208-00230-3003308-00230-3003408-00230-3003508-00230-3004108-00230-3004208-00230-3004308-00230-3004408-00230-3004508-00230-3005108-00230-3005208-00230-3005308-00230-3005408-00230-3005508-00230-3006108-00230-3006208-00230-3006308-00230-3006408-00230-3006508-00230-3007108-00230-3007208-00230-3007308-00230-3007408-00230-3007508-00230-4003108-00230-4003208-00230-4003308-00230-4003408-00230-4004108-00230-4004208-00230-4004308-00230-4004408-00230-4005108-00230-4005208-00230-4005308-00230-40054
ShankDia.(d)
OverallLength
(L)
2.85
3.8
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
CornerRadius
(R)
3
4
0.1
0.2
0.3
0.5
1
0.1
0.2
0.3
2.5
3.2
5060
70
805060
70
805060
70
805060
70
805060
70
8060
70
10060
70
10070
60
100
12.81
19.07
25.32
31.58
37.84
12.81
19.06
25.32
31.58
37.83
12.8
21.15
25.32
31.57
37.83
12.79
21.14
25.31
31.56
37.82
12.77
21.12
25.29
31.54
37.8
17.17
25.51
33.85
50.54
17.16
25.5
33.85
50.53
17.16
25.5
33.84
50.53
13.38
19.92
26.45
32.99
39.53
13.37
19.91
26.44
32.98
39.52
13.36
22.08
26.44
32.97
39.51
13.34
22.06
26.42
32.96
39.49
13.3
22.02
26.37
32.91
39.45
17.93
26.65
35.36
52.79
17.92
26.64
35.35
52.78
17.91
26.63
35.34
52.78
14
20.85
27.69
34.53
41.37
13.99
20.83
27.67
34.52
41.36
13.97
23.1
27.66
34.5
41.35
13.95
23.07
27.63
34.48
41.32
13.88
23
27.56
34.41
41.25
18.77
27.89
37.01
Free
18.75
27.88
37
Free
18.74
27.86
36.99
Free
14.69
21.87
29.05
36.23
43.4
14.67
21.85
29.03
36.21
43.39
14.65
24.22
29.01
36.19
43.37
14.61
24.18
28.97
36.15
43.33
14.51
24.09
28.87
36.05
43.23
19.68
29.26
Free
Free
19.66
29.24
Free
Free
19.65
29.22
Free
Free
16.28
24.24
Free
Free
Free
16.25
24.21
Free
Free
Free
16.22
26.83
Free
Free
Free
16.15
26.77
Free
Free
Free
15.99
26.61
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
12°
12°
6
6
Enhanced selectivity for machining process in all 146 sizes.Employing short flute length. Less interference to work material reduces chattering.Corner R accuracy : ±5μm (2.5D and below)Upgraded Mugen-Coating brings outstanding performance for milling of Prehardened Steels and Copper Electrodeas well. Unit [size : mm]
When you order, indicate MHR430R (D) x (R) x ( ).( y°) is reference value.
MHR430RMUGEN-COATING 4-Flute Long Neck Redius End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
279
Code No. Dia(D)
EffectiveLength
( )Neck
Taper Angle(y°)
16243248162432482040204020402040204024482448244824482448
08-00230-4006108-00230-4006208-00230-4006308-00230-4006408-00230-4007108-00230-4007208-00230-4007308-00230-4007408-00230-5003108-00230-5003208-00230-5004108-00230-5004208-00230-5005108-00230-5005208-00230-5006108-00230-5006208-00230-5007108-00230-5007208-00230-6003108-00230-6003208-00230-6004108-00230-6004208-00230-6005108-00230-6005208-00230-6006108-00230-6006208-00230-6007108-00230-60072
ShankDia.(d)
OverallLength
(L)
3.8
4.8
5.8
Neck Dia.(d2)
Lengh ofCut( )
Actual effective length dependingon inclined angle of workipiece.
30' 1° 1°30' 2° 3°
CornerRadius
(R)
4
5
6
0.5
1
0.1
0.2
0.3
0.5
1
0.1
0.2
0.3
0.5
1
3.2
4
5
60
70
10060
70
100709070907090709070909011090110901109011090110
17.15
25.49
33.83
50.52
17.13
25.47
33.81
50.5
21.34
42.19
21.33
42.19
21.33
42.19
21.32
42.18
21.3
42.16
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
17.89
26.61
35.33
52.76
17.85
26.57
35.28
52.71
22.29
Free
22.28
Free
22.27
Free
22.25
Free
22.21
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
18.71
27.83
36.96
Free
18.64
27.77
36.89
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
19.61
29.18
Free
Free
19.51
29.08
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
12°
12°
-
6
6
6
Enhanced selectivity for machining process in all 146 sizes.Employing short flute length. Less interference to work material reduces chattering.Corner R accuracy : ±5μm (2.5D and below)Upgraded Mugen-Coating brings outstanding performance for milling of Prehardened Steels and Copper Electrodeas well. Unit [size : mm]
When you order, indicate MHR430R (D) x (R) x ( ).( y°) is reference value.
MHR430RMUGEN-COATING 4-Flute Long Neck Redius End Mill
MUGEN Coating Endmill Series
EN
DM
ILL
280
Code No. Dia.(D)
CornerRadius
(D)
EffectiveLength
( )Neck
Taper Angle(y)
0.220.260.260.370.300.480.350.380.450.550.540.720.480.510.630.740.780.960.480.510.630.740.780.960.570.640.740.810.880.710.921.231.441.650.851.201.722.070.570.640.740.810.880.710.921.231.44
1212122323233434343434343581012358101235810358101235810
08-00770-0221108-00770-0221208-00770-0223108-00770-0223208-00770-0225108-00770-0225208-00770-0321108-00770-0321208-00770-0323108-00770-0323208-00770-0325108-00770-0325208-00770-0421108-00770-0421208-00770-0423108-00770-0423208-00770-0425108-00770-0425208-00770-0431108-00770-0431208-00770-0433108-00770-0433208-00770-0435108-00770-0435208-00770-0521108-00770-0521208-00770-0521308-00770-0521408-00770-0521508-00770-0523108-00770-0523208-00770-0523308-00770-0523408-00770-0523508-00770-0525108-00770-0525208-00770-0525308-00770-0525408-00770-0531108-00770-0531208-00770-0531308-00770-0531408-00770-0531508-00770-0533108-00770-0533208-00770-0533308-00770-05334
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d1)Lengh of
Cut( )
12°
12°
12°
12°
1°
3°
5°
1°
3°
5°
1°
3°
5°
1°
3°
5°
1°
3°
5°
1°
3°
Effective WallGradient Angle
( )
Under NeckTaper length
( )Neck
Taper Angle( )
0°38'0°49'1°54'2°28'3°10'4°07'0°43'0°49'2°10'2°27'3°35'4°04'0°45'0°49'2°14'2°26'3°44'4°03'0°46'0°49'2°17'2°28'3°48'4°07'0°41'0°49'0°53'0°54'0°55'2°02'2°25'2°38'2°43'2°46'3°23'4°02'4°25'4°32'0°41'0°49'0°53'0°55'0°55'2°04'2°27'2°40'2°44'
Unit [size : mm]
0.2
0.3
0.4
0.5
0.15
0.25
0.3
0.4
0.4
0.6
0.8
1
4
4
4
4
50
50
50
50
0.05
0.05
0.05
0.1
0.05
0.1
improve surface overall accuracy brought by high speed cutting with minimal chattring in roughing to finishing process.High R-Accuracy :+/- 5 mPrevent interference to a work. Designed tappered neck with angle tolerance: - 10’ .Better performance in wide range of machining of direct carving on Prehardened Steels and Copper Electrode.
MSTNR230MUGEN-COATING 2-Flute Long Taper Neck Redius End Mill
Effective Wall Gradient Angle
Effe
ctiv
e Le
ngth
1(
)
MUGEN Coating Endmill Series
EN
DM
ILL
281
Code No. Dia.(D)
CornerRadius
(D)
EffectiveLength
( )Neck
Taper Angle(y)
1.650.851.201.722.070.921.021.161.470.921.021.161.470.921.021.161.471.141.281.451.631.801.982.151.421.841.141.281.451.631.801.982.151.421.841.141.281.451.631.801.982.151.421.841.141.281.45
12358
105858585858586
1015202530356
106
1015202530356
106
1015202530356
106
1015
08-00770-0533508-00770-0535108-00770-0535208-00770-0535308-00770-0535408-00770-0821108-00770-0821208-00770-0823108-00770-0823208-00770-0831108-00770-0831208-00770-0833108-00770-0833208-00770-0841108-00770-0841208-00770-0843108-00770-0843208-00770-1021108-00770-1021208-00770-1021308-00770-1021408-00770-1021508-00770-1021608-00770-1021708-00770-1023108-00770-1023208-00770-1031108-00770-1031208-00770-1031308-00770-1031408-00770-1031508-00770-1031608-00770-1031708-00770-1033108-00770-1033208-00770-1041108-00770-1041208-00770-1041308-00770-1041408-00770-1041508-00770-1041608-00770-1041708-00770-1043108-00770-1043208-00770-1051108-00770-1051208-00770-10513
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d1)Lengh of
Cut( )
12°
12°
12°
3°
5°
1°
3°
1°
3°
1°
3°
1°
3°
1°
3°
1°
3°
1°
Effective WallGradient Angle
( )
Under NeckTaper length
( )Neck
Taper Angle( )
2°46'3°27'4°05'4°26'4°33'0°41'0°48'2°04'2°25'0°42'0°49'2°05'2°26'0°43'0°49'2°07'2°28'0°40'0°48'0°52'0°54'0°55'0°56'0°56'2°01'2°25'0°41'0°49'0°52'0°54'0°55'0°56'0°57'2°06'2°26'0°41'0°49'0°53'0°55'0°56'0°56'0°57'2°04'2°27'0°42'0°49'0°53'
0.5
0.8
1
0.4
0.65
0.8
1
1.6
2
4
4
4
50
50
50
60
70
80
506050
60
70
80
506050
60
70
80
506050
60
0.1
0.05
0.1
0.2
0.05
0.1
0.2
0.3
Unit [size : mm]
improve surface overall accuracy brought by high speed cutting with minimal chattring in roughing to finishing process.High R-Accuracy :+/- 5μmPrevent interference to a work. Designed tappered neck with angle tolerance: - 10’ .Better performance in wide range of machining of direct carving on Prehardened Steels and Copper Electrode.
MSTNR230MUGEN-COATING 2-Flute Long Taper Neck Redius End Mill
Effective Wall Gradient Angle
Effe
ctiv
e Le
ngth
1(
)
MUGEN Coating Endmill Series
EN
DM
ILL
282
Code No. Dia.(D)
CornerRadius
(D)
EffectiveLength
( )Neck
Taper Angle(y)
1.631.801.982.151.421.841.741.922.092.272.442.232.761.741.922.092.272.442.232.761.741.922.092.272.442.232.762.382.562.732.913.263.613.153.682.382.562.732.913.263.613.153.683.382.562.732.91
202530356101015202530101510152025301015101520253010151520253040501520152025304050152015202530
607080
5060
60
708060
60
708060
60
708060
60
7080
100
60
70
80
100
60
7080
08-00770-1051408-00770-1051508-00770-1051608-00770-1051708-00770-1053108-00770-1053208-00770-1531108-00770-1531208-00770-1531308-00770-1531408-00770-1531508-00770-1533108-00770-1533208-00770-1541108-00770-1541208-00770-1541308-00770-1541408-00770-1541508-00770-1543108-00770-1543208-00770-1551108-00770-1551208-00770-1551308-00770-1551408-00770-1551508-00770-1553108-00770-1553208-00770-2031108-00770-2031208-00770-2031308-00770-2031408-00770-2031508-00770-2031608-00770-2033108-00770-2033208-00770-2041108-00770-2041208-00770-2041308-00770-2041408-00770-2041508-00770-2041608-00770-2043108-00770-2043208-00770-2051108-00770-2051208-00770-2051308-00770-20514
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d1)Lengh of
Cut( )
12°
12°
12°
1°
3°
1°
3°
1°
3°
1°
3°
1°
3°
1°
3°
1°
Effective WallGradient Angle
( )
Under NeckTaper length
( )Neck
Taper Angle( )
0°55'0°56'0°56'0°57'2°06'2°29'0°43'0°49'0°51'0°53'0°54'2°07'2°25'0°43'0°49'0°52'0°53'0°55'2°08'2°26'0°43'0°49'0°52'0°53'0°55'2°10'2°27'0°44'0°48'0°50'0°52'0°54'0°55'2°13'2°25'0°44'0°49'0°51'0°52'0°54'0°55'2°14'2°25'0°45'0°49'0°51'0°53'
1
1.5
2
0.8
1.2
1.6
2
3
4
0.3
0.1
0.2
0.3
0.1
0.2
0.3
4
4
4
Unit [size : mm]
improve surface overall accuracy brought by high speed cutting with minimal chattring in roughing to finishing process.High R-Accuracy :+/- 5μmPrevent interference to a work. Designed tappered neck with angle tolerance: - 10’ .Better performance in wide range of machining of direct carving on Prehardened Steels and Copper Electrode.
MSTNR230MUGEN-COATING 2-Flute Long Taper Neck Redius End Mill
Effective Wall Gradient Angle
Effe
ctiv
e Le
ngth
1(
)
MUGEN Coating Endmill Series
EN
DM
ILL
283
Code No. Dia.(D)
CornerRadius
(D)
EffectiveLength
( )Neck
Taper Angle(y)
3.263.613.153.682.382.562.732.913.263.613.153.683.313.493.844.194.544.893.313.493.844.194.544.89
405015201520253040501520152030405060152030405060
80100
60
7080
100
60
60
80
100110
60
80
100110
08-00770-2051508-00770-2051608-00770-2053108-00770-2053208-00770-2061108-00770-2061208-00770-2061308-00770-2061408-00770-2061508-00770-2061608-00770-2063108-00770-2063208-00770-3041108-00770-3041208-00770-3041308-00770-3041408-00770-3041508-00770-3041608-00770-3061108-00770-3061208-00770-3061308-00770-3061408-00770-3061508-00770-30616
ShankDia.(d)
OverallLength
(L)Neck Dia.
(d1)Lengh of
Cut( )
12°
12°
1°
3°
1°
3°
1°
1°
Effective WallGradient Angle
( )
Under NeckTaper length
( )Neck
Taper Angle( )
0°55'0°56'2°15'2°26'0°46'0°49'0°52'0°53'0°55'0°56'2°17'2°28'0°37'0°43'0°49'0°51'0°53'0°54'0°37'0°43'0°49'0°52'0°53'0°55'
2
3
1.6
2.5
4
6
4
6
0.3
0.5
0.2
0.5
Unit [size : mm]
improve surface overall accuracy brought by high speed cutting with minimal chattring in roughing to finishing process.High R-Accuracy :+/- 5μmPrevent interference to a work. Designed tappered neck with angle tolerance: - 10’ .Better performance in wide range of machining of direct carving on Prehardened Steels and Copper Electrode.
When you order, indicate MSTNR230 (D) x (R) x ( ) x ( ).0
MSTNR230MUGEN-COATING 2-Flute Long Taper Neck Redius End Mill
Effective Wall Gradient Angle
Effe
ctiv
e Le
ngth
1(
)
MUGEN Coating Endmill Series
EN
DM
ILL
284
Tool life is exceptionally extended as MUGEN-COATING provides additional wear resistance.
Code No. Dia (D) Outer Dia.Neck
Taper Angle(y°)
0.10.150.2
0.250.3
0.350.4
0.450.5
0.550.6
0.650.7
0.750.8
0.850.9
0.951
1.251.5
1.752
2.53
3.54
4.55
0.50.50.50.50.50.50.50.50.50.50.50.50.50.50.80.80.80.80.80.81.51.51.51.51.52222
0.80.91
1.11.21.31.41.51.61.71.81.92
2.12.52.62.72.82.93.44.65.15.66.67.69.110.111.112.1
12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°12°
----
45°45°
-45°
-
08-00900-0010008-00900-0015008-00900-0020008-00900-0025008-00900-0030008-00900-0035008-00900-0040008-00900-0045008-00900-0050008-00900-0055008-00900-0060008-00900-0065008-00900-0070008-00900-0075008-00900-0080008-00900-0085008-00900-0090008-00900-0095008-00900-0100008-00900-0125008-00900-0150008-00900-0175008-00900-0200008-00900-0250008-00900-0300008-00900-0350008-00900-0400008-00900-0450008-00900-05000
Shank Dia.(d)
OverallLength
(L)
444444444444444444444446810101212
Radius(R)
4545454545454545454545454545454545454545454545455555556565
Unit [size : mm]
Type B
TypeOuter Dia.
Length( )
3333333355555555558888
10101212121515
AAAAAAAAAAAAAAAAAAAABBBBAABAB
Type A
When you order, indicate MIR200 (R) ( ) is reference value.y°
MIR200MUGEN-COATING 2-Flute Inner Redius Cutter
MUGEN Coating Endmill Series
EN
DM
ILL
285
NS unique flute design reduces chattering at corner and side milling
Code No. TypeLength of Cut( )
NeckTaper Angle
(y°)
UnderNeck Dia.
(d2)
0.30.4
0.5
0.75
1
1.5
2
2.5
3
456
0.450.62
0.75
3
1.1
4
1.5
6
2.5
8
3
10
3.5
12
6
162024
Effective Length 1( )
34-5
10-
7.515-
1020-
1530-
2040-
2550-
3060---
221
2
1
2
1
2
1
2
1
2
1
2
1
2
111
Dia (D)
0.60.8
1
1.5
2
3
4
5
6
81012
0.560.76
-0.95
-1.45
-1.94
-2.85
-3.8
-4.8
-5.8
---
-
-
- -
12°12°
12°
12°
12°
12°
12°
12°
01-00638-0300101-00638-0400101-00638-0500101-00638-0501101-00638-0501301-00638-0750101-00638-0751101-00638-0751301-00638-1000101-00638-1001101-00638-1001301-00638-1500101-00638-1501101-00638-1501301-00638-2000101-00638-2001101-00638-2001301-00638-2500101-00638-2501101-00638-2501301-00638-3000101-00638-3001101-00638-3001301-00638-4000101-00638-5000101-00638-60001
Shank Dia.(d)
OverallLength
(L)
44
4
4
4
6
6
6
6
81012
Radius(R)
6060
60
60
60
60
7070809080
100
90
12090100110
Unit [size : mm]
Type 1
Type 2
When you order, indicate ALB225 (R) x ( ) x ( ) ( ) is reference value.y°
ALB225Ball End Mill for Aluminum
End Mill for Aluminum
EN
DM
ILL
286
Code No. Radius(R)
Lengthof Cut
( )
NeckTaperAngle
(y°)
0.50.75
11.251.5
1.752
2.534568
10
2345678
10121620243240
11.52
2.53
3.54568
10121620
9°9°
12°9°9°9°9°9°------
07-00523-0005007-00523-0007507-00523-0010007-00523-0012507-00523-0015007-00523-0017507-00523-0020007-00523-0025007-00523-0030007-00523-0040007-00523-0050007-00523-0060007-00523-0080007-00523-01000
ShankDia.(d)
OverallLength
(L)
446666666810121620
Dia(D)
45456060606060608090100110150170
Semi-standard item, Please inquire for price and delivery.
Unit [size : mm]
When you order, indicate DB (R) ( ) is reference value.y°
DB2-Flute Ball End Mill for Nonferrous
Endmill for Copper
EN
DM
ILL
287
Code No. Radius(R)
Lengthof Cut
( )
NeckTaperAngle
(y°)
0.5
0.75
1
1.5
2
2.5
3
4
5
6
1.5
2.25
3
4.5
6
7.5
9
12
15
18
1
1.5
2
3
4
5
6
8
10
12
0.95
1.45
1.94
2.85
3.8
4.8
5.8
7.8
9.8
11.8
4
4
4
6
6
6
68
810
1012
1216
50
50
50
60
8060709060709060901107010012090120140110130160
EffectiveLength
( )46
106
10168
1420152535203040203040203050204060305070406080
12°
12°
12°
12°
12°
12°
-12°
-12°
-12°
-12°
07-00432-0050407-00432-0050607-00432-0051007-00432-0070607-00432-0071007-00432-0071607-00432-0100807-00432-0101407-00432-0102007-00432-0151507-00432-0152507-00432-0153507-00432-0202007-00432-0203007-00432-0204007-00432-0252007-00432-0253007-00432-0254007-00432-0302007-00432-0303007-00432-0305007-00432-0402007-00432-0404007-00432-0406007-00432-0503007-00432-0505007-00432-0507007-00432-0604007-00432-0606007-00432-06080
ShankDia.(d)
OverallLength
(L)
Dia(D)
Neck Dia.(d2)
It is very suitable for on a cutting narrow and deep area by long neck ball end mill.As the cutting edge is very sharp, it is suitable for nonferrous.
Unit [size : mm]
When you order, indicate DHB (R) x ( ). ( ) is reference value.y°
DHB2-Flute Long Neck Ball End Mill for Nonferrous
Endmill for Copper
EN
DM
ILL
288
Code No. Model
S12-NPC6-50S12-NPC6-60S12-NPC6-70S12-NPC6-100S12-NPC6-150S12-NPC6-200
01-00996-0005001-00996-0006001-00996-0007001-00996-0010001-00996-0015001-00996-00200
Overall Length(L)
Holder is made of heavy and stiff carbide.It is very suitable for precise cutting at deep area without chattering.
506070100150200
Code No. Model
NPC6-50NPC6-60NPC6-70NPC6-100NPC6-150NPC6-200
01-00996-0003301-00996-0004301-00996-0005301-00996-0008301-00996-0013301-00996-00183
Overall Length(L)
33435383133183
Code No. Model
S12-NPC6-50SS12-NPC6-60SS12-NPC6-70SS12-NPC6-100SS12-NPC6-150SS12-NPC6-200S
01-00996-0205001-00996-0206001-00996-0207001-00996-0210001-00996-0215001-00996-02200
Overall Length(L)
506070
100150200
Code No. Model
NPC6-3NPC6-4NPC6-6
01-00996-0000301-00996-0000401-00996-00006
Overall Length(L)
346
NPCASHINAGA CHUCK
Chuck
EN
DM
ILL
289
EN
DM
ILL
EN
DM
ILL
EN
DM
ILL
VICTORY MILL SERIES
294
Features
1.5 times longer tool life than conventional coated End Mills
Compound multi - layered TiAIN coating.Designed for high - speed milling and long tool life.Excellent cost - performance.
Performance
MillingCondition
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MillingCondition
Work Materials
Carbon Steels, Rolled Steels, Alloy Steels, Pre-Hardened Steels, Mold Steels, Stainless Steels, Nickel Alloys,Titanium Alloys, Cast Irons, Aluminum Alloys, Copper Alloys
400
300
200
100
0VICTORY MILL
Wea
r
Brand A(TiN Coated)
Brand C(TiCN Coated)
Cornerwear
Flankwear
Localizedflank wear
400
300
200
100
0VICTORY MILL
Wea
r
Brand B(TiN Coated)
Cornerwear
Flankwear
Localizedflank wear
-1
End mill : 6 mmSpeed : 65 m / min (3,450 min )Feed : 260 mm / min (0.038 mm / tooth)Work material : S50C (180 HB)
Milling depth : ae = 6 mm ap = 1.5 mmMilling method : Side milling (Down cut)Cutting oil : Air blowMachine : Vertical machining center
-1End mill : 10 mmSpeed : 60 m / min (1,910 min )Feed : 230 mm / min (0.063 mm / tooth)Work material : S50C (180 HB)
Milling depth : aa = 10mm ar = 2.5 mmMilling method : Side milling (Down cut)Cutting oil : Air blowMachine : Vertical machining center
VICTORY MILL
Brand A(TiN Coated)
Brand C(TiCN Coated)
Corner wear Flank wear Localized flank wear
VICTORY MILL
Brand B(TiN Coated)
Corner wear Flank wear Localized flank wear
VICTORY MILL
EN
DM
ILL
VICTORY MILL SERIES
295
Features
VICTORY MILL HEAVY & ROUGHING
Performance
Groove milling of VICTORY Mills HEAVY
Groove milling of VICTORY Mills Roughing
Side milling of VICTORY Mills Roughing
<HEAVY> Long life is provided by combination with TiAIN coat and enables high-speed cutting more. It shows stable performance in heavy duty of grooving/side milling.
<ROUGHING> The chip breaker that it adopted reduces cutting resistance and improves in chip removal, and shows stable performance in hevy duty of gooving/side milling.
-1
Grooving Life is 3 times
Grooving Life is 2 times
ExcellentWear-resistant
Side Milling Wear 60 %
Excellentchipping-resistant
Excellentchipping-resistant
Work Materials
Carbon steels, Alloy steels, Pre-Hardened steels, Stainless steels, Nickel alloys, Titanium alloys, Cast Irons, Aluminum alloys
EN
DM
ILL
VICTORY MILL SERIES
296
LIST 6478
VICTORY Mills 2 Flutes
VAN NACHI 2VE DIA. LIST 6480
VICTORY Mills 4 Flutes
VAN NACHI 4VE DIA.Lengthof Cut
OverallLength Shank Dia.Drill Dia
2345688
1010121214141414181818182222222226262626303030303535353540404040455050505555
50505050506060606060606565656570707070808080809090909095959595
105105105105110110110110110120120120125125
66666888888
10101010101010101212121216161616161616162020202020202020202525252525
11.522.533.544.555.566.577.588.599.51010.51111.51212.51313.51414.51515.51616.51717.51818.51919.520222425262830
Srock
1010 +20~0
+25~0
1010 0~-20
0~-25
Lengthof Cut
OverallLength Shank Dia.Drill Dia
7912121515151520202020252525253030303035353535404040404040404045454545455050505555
50506060606060606565656575757575808080809090909095959595105105105105110110110110110120120120125125
6668888810101010101010101212121216161616161616162020202020202020202525252525
2.533.544.555.566.577.588.599.51010.51111.51212.51313.51414.51515.51616.51717.51818.51919.520222425262830
Srock
Unit :mmUnit :mm
EN
DM
ILL
VICTORY MILL SERIES
297
LIST 6416
VICTORY Mills 2 Flutes Long
VAN NACHI 2VEL DIA. LIST 6418
VICTORY Mills 4 Flutes Long
VAN NACHI 4VEL DIA.
above and belowTolerance
( m)Dia. of Mill (mm)
1010 0~-20
0~-25
Lengthof Cut
OverallLength Shank Dia.Drill Dia
1520252535455555656575759090909090
606065658095
105110120130140140160160160160160
6888
10101216162020202525252525
34568101214161820222425262830
Srock Lengthof Cut
OverallLength Shank Dia.Drill Dia
1520252535455555656575759090909090
606065658095105110120130140140160160160160160
6888
10101216162020202525252525
34568101214161820222425262830
Srock
above and belowTolerance
( m)Dia. of Mill (mm)
1010 0~-20
0~-25
Unit :mmUnit :mm
EN
DM
ILL
VICTORY MILL SERIES
298
LIST 6408
VICTORY Mills Heavy
VAN NACHI VHV DIA. LIST 6410
VICTORY Mills HEAVY Long
VAN NACHI VLHV DIA.
Lengthof Cut
OverallLength
Shank Dia.Drill Dia
912151520202525303035354040404045454545505050505555555560606570707070
5060606065657575808090909595
105105110110110110120120120120125125125125145145150160160160160
6888
10101212121216161616202020202020252525252525252532323232423242
345678910111213141516171819202122232425262728293032354045455050
SrockNO. ofFlutes
44444444444444444444444446666666666
Lengthof Cut
OverallLength
Shank Dia.Drill Dia
15202525353545455555555565656565757575909090105105125145145145145
6060656580809595105105110110120120130130140140140160160160190190210230230230230
688810101212121216161616202020202025252532323232423242
345678910111213141516171819202225283032354045455050
SrockNO. ofFlutes
44444444444444444444666666666
Unit :mm Unit :mm
36
101830
36
101830
+0.025 ~ 0+0.030 ~ 0+0.036 ~ 0+0.043 ~ 0+0.052 ~ 0+0.062 ~ 0
above and belowDia. of Mill (mm)
EN
DM
ILL
VICTORY MILL SERIES
299
LIST 6482
VICTORY Mills Roughing Regular Length Short
VAN NACHI VSRE DIA.
LIST 6414 VAN NACHI VELRE DIA.
Lengthof Cut
OverallLength
Shank Dia.Drill Dia
1520202525303035354040
60656575758080909095
105
610101010121216161620
678910111214151618
SrockNO. ofFlutes
44444444444
Lengthof Cut
OverallLength
Shank Dia.Drill Dia
4545505055556060657070
110110120120125140145145150155160
2020252525323232324242
2022242528303235404550
SrockNO. ofFlutes
44555566666
Tolerance: 0.1mm+Tolerance: 0.1mm+
Lengthof Cut
OverallLength
ShankDia.
DrillDia
162532404040484856566767676780809595112
8090
100110110125125125140140160160160160180180200200220
68
1012121616162020202525253232324242
681012141516182022242528303235404550
SrockNO. ofFlutes
4444444444555566666
VICTORY Mills Roughing LongVICTORY Mills Roughing Medium
LIST 6412 NACHI VMRE DIA.VAN
L1 Lengthof Cut
OverallLength
Shank Dia.Drill Dia
2635455353536363757590909090106106125125150
8090100110110125125125140140160160160160180180200230250
681012121616162020202525253232324242
681012141516182022242528303235404550
SrockNO. ofFlutes
4444444444555566666
-----
5356-
70--
88--
112----
d1
-----
13.314.3
-18.0
--
23.0--
29.5----
Tolerance: 0.1mm+
Unit :mmUnit :mm
Unit :mm
EN
DM
ILL
VICTORY MILL SERIES
300
VICTORY Mills 2 Flutes
VICTORY Mills 4 Flutes
VICTORY Mills 2 Flutes Long
23568101215202530
6400420025002100160013001100850640510420
15016016016016017016016015012095
48003200190016001200960800640480380320
1101101101101101101101101008065
40002700160013001000800660530400320270
6872697170727171675040
3200210013001100800640530420320250210
4549474949494949463530
7200480029002400180014001200960720570480
420440430440440450440440410320250
14000900054004500340027002300180014001100900
720760740760760770760760720550440
1. In dry milling (recommend air blow), reduce the rotation and feed to 70% of table values.2. Adjust milling condition when unusual vibration, different sound occur by cutting.
3568101215202530
420025002100160013001100850640510420
200200200200210200200190150120
3200190016001200960800640480380320
14014014014014014014013010080
2700160013001000800660530400320270
86888890898984846550
210013001100800640530420320250210
61596160626161574535
480029002400180014001200960720570480
550550550550560550550520400320
900054004500340027002300180014001100900
950920950950970950950890690550
356810121520
420025002100160013001100850640
8080808080808075
3200190016001200960800640480
5555555555555550
2700160013001000800660530400
3535353535353530
210013001100800640530420320
2525252525252525
480029002400180014001200960720
220220220220220220220210
90005400450034002700230018001400
380380380380380380380360
1. In dry milling (recommend air blow), reduce the rotation and feed to 70% of table values.2. Adjust milling condition when unusual vibration, different sound occur by cutting.
1. In dry milling (recommend air blow), reduce the rotation and feed to 70% of table values.2. Adjust milling condition when unusual vibartion, different sound occur by cutting.
EN
DM
ILL
VICTORY MILL SERIES
301
VICTORY Mills 4 Flutes Long
VICTORY Mills HEAVY
3568101215202530
420025002100160013001100850640510420
1101101101101101101101008065
3200190016001200960800640480380320
75757575757575705540
2700160013001000800660530400320270
45454545454545453525
210013001100800640530420320250210
33333333333333302520
480029002400180014001200960720570480
290290290290300290290280210170
900054004500340027002300180014001100900
510490500500510510510480370290
1. In dry milling (recommend air blow), reduce the rotation and feed to 70% of table values.2. Adjust milling condition when unusual vibration, different sound occur by cutting.
3568101215202530
5000300025001900150012501000750600500
290290290290300290290260220200
380023001900140012001000800600500400
190190190190200200200180150120
32001900160012001000800600500400300
1301301301301301301301209080
2500160013001000800600500400300250
90909090909090806050
5800350029002200170014001200900700600
770770790790800790790740580510
10800650054004100320028002200170013001100
13201320132013201320132013201320980860
1. In dry milling (recommend air blow), reduce the rotation and feed to 70% of table values.2. Adjust milling condition when unusual vibration, different sound occur by cutting.
EN
DM
ILL
VICTORY MILL SERIES
302
VICTORY Mills HEAVY Long
VICTORY Mills Roughing Regular Length Short
3568101215202530
5000300025001900150012501000750600500
180180180180180180180160140120
380023001900140012001000800600500400
12012012012012012012011010090
32001900160012001000800600500400300
80808080808080706060
2500160013001000800600500400300250
50505050505050504040
5800350029002200170014001200900700600
470470480480480480480460350300
10800650054004100320028002200170013001100
840840840840840840800700600560
1. In dry milling (recommend air blow), reduce the rotation and feed to 70% of table values.2. Adjust milling condition when unusual vibration, different sound occur by cutting.
681012152025304050
2100160013001100850640510420320250
260280280280280260290260170110
16001200960800640480380320240190
18019019019019018020018011071
13001000800660530400320270200160
1001201201201201101301107446
1100800640530420320250210160130
75808084847887785132
2400180014001200960720570480360290
320340340340340340390360230150
4500340027002300180014001100900680540
12001300130013001300130014001300840520
1. In dry milling (recommend air blow), reduce the rotation and feed to 70% of table values.2. Adjust milling condition when unusual vibration, different sound occur by cutting.
EN
DM
ILL
VICTORY MILL SERIES
303
VICTORY Mills Roughing Medium
VICTORY Mills Roughing Long
681012152025304050
2100160013001100850640510420320250
18020020020020018019017011071
16001200960800640480380320240190
1201301301301301201301207648
13001000800660530400320270200160
75808086868185764931
1100800640530420320250210160130
50555959595558523421
2400180014001200960720570480360290
220240240240240240260240150100
4500340027002300180014001100900680540
800900900920920890950860560350
1. In dry milling (recommend air blow), reduce the rotation and feed to 70% of table values.2. Adjust milling condition when unusual vibration, different sound occur by cutting.
681012152025304050
2100160013001100850640510420320250
1301501501501501401501308553
16001200960800640480380320240190
901001001001009598885736
13001000800660530400320270200160
60656565666164573723
1100800640530420320250210160130
40454545454244392516
2400180014001200960720570480360290
17018018018018018020018012073
4500340027002300180014001100900680540
650700700700700670710650420260
1. In dry milling (recommend air blow), reduce the rotation and feed to 70% of table values.2. Adjust milling condition when unusual vibration, different sound occur by cutting.