eng manuale tecnico cucine 2016
TRANSCRIPT
KITCHEN1 _ 2016
TECHNICAL MANUAL
301/2016
L = WidthP = DepthH = HeightPr = Price code
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
130Silk White
CARCASSES
608Grey-graphite oak(open-pore)
MELAMINE-COATED
Coated with high quality resin
501Supreme white
FINISHES
502Pebble grey
DECOMAT
Bi-laminate – Edge in polypropylene, applied with Laser technique
FRONT PANELSPANELS
CARCASSES
C o l o u r s - W o o d s p e c i e s
CUSTOMISED COLOURS ARE NOT FEASIBLE
CUSTOMISED COLOURS ARE NOT FEASIBLE
4 01/2016
L = WidthP = DepthH = HeightPr = Price code
003 White Boffi (411) *
140Cream Boffi **
145Sand Boffi **
144Dove grey Boffi **
149Grey Boffi **
148Dark grey Boffi **
LAMINATE
High-resistant HPL laminate
FRONT PANELSPANELSTOPSBACK PANELS
151 White (410) *
Price increase for CUSTOM-ISED COLOURS ***
+0%ABET / PRINT colours
+??%AS PER SAMPLE colours
NEW
* The doors and panels in White 151 (410) or Boffi white 003 (411) have the edge in same colour, applied with Laser technique.
** The doors and panels, in colours different from White 151 (410) or Boffi white 003 (411), have edge (type AH) in aluminium or wood (choose the species from Wood or Wood Selection range).
*** With no extra charge it is possible to ask for one of the 100 colours of the ABET COLOURS list, included in Boffi FINISHES & COLOURS samples box (max sizes: 2970 x 1260 mm). Customised colours require the feasibility approval by Boffi and they will be subject to an extra charge. The lead time for goods in ABET COLOURS or customised colours will be defined by single case. Please see more details at page 21.19.
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
501/2016
L = WidthP = DepthH = HeightPr = Price code
177Alaska white *
178Malè white
179Luxor beige
180Ottawa beaver
181Londra grey
182Ingo black
LASERMAT
Nanotechnological matt “soft touch” surface - Edge in polypropylene, applied with Laser technique
FRONT PANELSPANELSTOPSBACK PANELS
183Kos white **
184Efeso grey
185Bromo grey
NEW
NEW NEW
* The colour Alaska white Lasermat 177, in some light conditions, tends to reveal the red pigment inside the colour formulation, causing chromatic changes.This characteristic can not be considered cause for a compliant.
** The colour Kos white Lasermat 183 is recommended for matches with white Corian® 173 / white Silcover 003 / Arctic white Ecolak 510.
The external decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnol-ogy (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view.
The internal structural layer is obtained through the thermo-lamination of kraft papers, soaked in thermosetting resin.
CUSTOMISED COLOURS ARE NOT FEASIBLE
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
6 01/2016
L = WidthP = DepthH = HeightPr = Price code
003White *
133Bright white(Lamicolor® 754)
129Magnolia
131 Sand
134Graphite grey
119Grey
118Black
025Ècru
024Pebble grey
023Mud
SILCOVER
Matt lacquered, fine textured
FRONT PANELSPANELSBACK PANELS
Price increase for CUSTOM-ISED COLOURS **
+10%RAL or NCS colours
+18%AS PER SAMPLE colours
* The colour white Silcover 003 is recommended for matches with white Corian® 173 / Kos white Lasermat 183 / Arctic white Ecolak 510 / white Polyester 003.
** The extra charge has to be applied to the price of cabinets, SILCOVER category. Please consider a 4 weeks time increase for supply of goods. Fluorescent or metalized colours are not feasible. Please see more details at page 21.19.
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
701/2016
L = WidthP = DepthH = HeightPr = Price code
510Arctic white *
511Bright white
129Magnolia
512Oat colour
025Ècru
024Pebble grey
023Mud
513Cloud colour
515Basalt grey
027Black
ECOLAK
Water-based matt “Soft touch” lacquer
FRONT PANELSPANELSBACK PANELS
517Charcoal
Price increase for CUSTOM-ISED COLOURS **
+10%RAL or NCS colours
+18%AS PER SAMPLE colours
* The colour Arctic white Ecolak 510 is recommended for matches with white Corian® 173 / Kos white Lasermat 183 / white Silcover 003 / white Polyester 003.
** The extra charge has to be applied to the price of cabinets, ECOLAK category. Please consider a 4 weeks time increase for supply of goods. Fluorescent or metalized colours are not feasible. Please see more details at page 21.19.
NEW
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
8 01/2016
L = WidthP = DepthH = HeightPr = Price code
049Oak **
033Ash-grey oak *
076Grey-graphite oak **
100Black Eco-wood **
WOOD
Veneer wood / Veneer reconstructed Eco-wood
FRONT PANELSPANELSTOPSBACK PANELSHOOD PANELS
048Core walnut *
052Thermo-treated acacia wood (brushed) **
WOOD SELECTION
Veneer wood
FRONT PANELSPANELSTOPSBACK PANELSHOOD PANELS
331Larch wood, Aspen white *
332Larch wood, Orion black *
* Finished with water-based paint.
** Finished with acrylic-based paint.
*** Customised species require the feasibility approval by Boffi. They will be subject to an extra charge and lead time increase, which will be defined by single case. Please see more details at page 21.19.
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
Attention!Doors and panels have vertical grain, XILA ST excluded.XILA ST doors and panels are available only in Oak 049 and black Eco-wood 100, with horizontal grain.
* Finished with water-based paint.
** Finished with acrylic-based paint. The thermo-treatment is a gradual heating process, performed in specific plants, which ages wood veneers with heating stresses meant to steady wood characteristics and colour.
*** Customised species require the feasibility approval by Boffi. They will be subject to an extra charge and lead time increase, which will be defined by single case. Please see more details at page 21.19.
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
Attention!Doors and panels have vertical grain.
Price increase for CUSTOM-ISED SPECIES ***
+??%Species AS PER SAMPLE
Price increase for CUSTOM-ISED SPECIES ***
+??%Species AS PER SAMPLE
NEW NEW
NEW
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
901/2016
L = WidthP = DepthH = HeightPr = Price code
003White *
129Magnolia
005Grey Ral 7038
106Sahara
027Black
024Pebble grey
001Andalusian red
004Grey
063Sand
007Dark green
FRONT PANELSPANELS
POLYESTER
Polyester hi gloss lacquer
* The colour white Polyester 003 is recommended for matches with white Corian® 173 / Kos white Lasermat 183 / white Silcover 003 / Arctic white Ecolak 510.
** The extra charge has to be applied to the price of cabinets, POLYESTER category. Please consider a 4 weeks time increase for supply of goods. Fluorescent or metalized colours are not feasible. Please see more details at page 21.19.
Price increase for CUSTOM-ISED COLOURS **
+18%RAL colours
+25%AS PER SAMPLE colours
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
10 01/2016
L = WidthP = DepthH = HeightPr = Price code
192Titanium
191Lead
934Aluminium
METALS
Metal-effect lacquer
FRONT PANELSPANELS
WOOD 3D
Veneer wood, slats effect, alternating thickness 20 /23 mm.
FRONT PANELSPANELS
CUSTOMISED COLOURS ARE NOT FEASIBLE
3D
100Black Eco-wood **
048Core walnut *
052Thermo-treated acacia wood (brushed) **
* Finished with water-based paint.
** Finished with acrylic-based paint. The thermo-treatment is a gradual heating process, performed in specific plants, which ages wood veneers with heating stresses meant to steady wood characteristics and colour.
*** Customised species require the feasibility approval by Boffi. They will be subject to an extra charge and lead time increase, which will be defined by single case. Please see more details at page 21.19.
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
Attention!Doors and panels have vertical grain.
Price increase for CUSTOM-ISED SPECIES ***
+??%Species AS PER SAMPLE
NEW NEW NEW
Attention!Metals is a special finishing which reproduces the typical effect of metallic surfaces, rendered through a very precise and technical se-quence of production cycles. The characteristic metallic effect of the surface is given by the alternation of manual and mechanical process-es, by the quality of the chromium particles-enriched acrylic paints and by the complex drying procedure.The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession of multi-directional brushingof the surface make each piece a unique and exclusive one. The above mentioned characteristics shall not be considered cause of com-plaint.
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
1101/2016
L = WidthP = DepthH = HeightPr = Price code
055Canaletto walnut “sawn-effect“ *
055Canaletto walnut “sawn-effect“ *
057“Old“ grey pinewood **
058Canaletto LIGHT walnut “sawn-effect“ *
058Canaletto LIGHT walnut “sawn-effect“ *
SOLID WOOD
Solid wood layers, with support made of strip wood
FRONT PANELSPANELSTOPS
SOLID WOOD 3D
Slats, alternating thickness 20 / 23 mm - Solid wood layers, with support made of strip wood
FRONT PANELSPANELS
3D
* Front panels and panels: finished with vegetable oils. / Worktops: finished with water-based paints.
** Finished with special painting cycles, that don’t change the “old” aspect of the wood.
*** Upon request, without an extra charge, the worktops can be proposed in Oak solid wood 049 / grey-graphite oak 076 (tone matching between solid wood parts and veneered parts in the same species is not guaranteed).
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
Attention!Doors and panels have vertical grain.The solid Canaletto walnut with “sawn effect“ (the two versions: 055 or 058 LIGHT) may have parts with lighter grain alternating the dark one.The “old“ grey pinewood 057 consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteris-tic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood. Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability.For this reasons each piece in solid wood has to be considered “unique“ and different from all the other ones.The above mentioned characteristics shall not be considered cause of complaint.
* Finished with natural vegetable oil-based waxes.
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
Attention!Doors and panels have vertical grain.The solid Canaletto walnut with “sawn effect“ (the two versions: 055 or 058 LIGHT) may have parts with lighter grain alternating the dark one.For this reasons each piece in solid wood has to be considered “unique“ and different from all the other ones.The above mentioned characteristics shall not be considered cause of complaint.
Price increase for worktops in CUSTOMISED SPECIES ***
+0%ONLY:Oak 049Grey-graphite oak 076
NEW
NEW
NEW
SPECIAL OR CUSTOM-ISED SPECIES ARE NOT FEASIBLE
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
12 01/2016
L = WidthP = DepthH = HeightPr = Price code
STAVES IN SOLID WOOD
Solid wood layers with staves effect on support in strip-wood
TOPS
092Steel *
ALUMINIUM
Anodised aluminium sheet
FRONT PANELSPANELS
091Dark **
049Oak *
076Grey-graphite oak *
052Thermo-treated acacia wood (brushed) *
332Larch wood, Orion black *
NEW
NEWPrice increase for CUSTOM-ISED SPECIES **
+0%ONLY:LIGHT Canaletto walnut “sawn effect” 058Canaletto walnut “sawn effect” 055
* Finished with water-based paints.
** Upon request, without an extra charge, the worktops can be proposed in solid LIGHT Canaletto walnut “sawn effect” 058/ Canaletto walnut “sawn effect” 055.
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
Attention !Tone matching between solid wood parts and veneered parts in the same species is not guaranteed.This finish has small grooves between wood staves in order to avoid possible unaesthetic effects (cracks and possible retractions of the same staves due to temperature and humidity changes), possibly caused by characteristic natural wood change. This issue shall not be considered cause of complaint.
* Brushed finish.
** Micro-sandblasted finish.
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
1301/2016
L = WidthP = DepthH = HeightPr = Price code
Extra-light frosted Painted dove grey
Extra-light frosted Painted coffee
Extra-light frosted Painted white
GLASS
Tempered glass
FRONT PANELSTOPSBACK PANELSFRAMES WITH GLASSHOOD PANELS
SatinSoft White
Whitepainted
Frosted
GLASS
Tempered glass
BACK PANELSFRAME WITH GLASSHOOD PANELS
Blackpainted
* Customised glasses require the feasibility approval by Boffi. They will be subject to an extra charge and lead time increase, which will be defined by single case.
Attention!Please consider that glasses with same colours but different thickness (e.g.: door 4 mm / top 12 mm) have always different tones. Colour of possible replacements or completions, may not match exactly the original one.
Price increase for CUSTOM-ISED GLASSES *
+??%Glass AS PER SAMPLE (worktops feasible only in standard colours)
Price increase for CUSTOM-ISED GLASSES *
+??%Glass AS PER SAMPLE
* Customised glasses require the feasibility approval by Boffi. They will be subject to an extra charge and lead time increase, which will be defined by single case.
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
14 01/2016
L = WidthP = DepthH = HeightPr = Price code
Pre-satinstainless steel
STAINLESS STEEL
Box section structure steel sheet
FRONT PANELSBACK PANELSHOOD PANELS
Polished stainless steel
STAINLESS STEEL
Box section structure steel sheet
DURINOX®
Box section stainless steel, micro-sandblasted finish
TOPS
TOPSBACK PANELS
Matt satinstainless steel
C.R.S. Scotch Britestainless steel
Durinox®
NEW
CUSTOMISED FINISHES ARE NOT FEASIBLE
CUSTOMISED FINISHES ARE NOT FEASIBLE
CUSTOMISED FINISHES ARE NOT FEASIBLE
In comparison with conventional stainless steel surfaces this material is on average more than twice as hard, which makes it much more resistant to scratches and less impervious to fingerprints. The micro-sandblasted treatment makes the surface especially homogenous, matt and velvety.This innovative material is derived from aerospace technology and is an absolute novelty for kitchen worktops.
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
1501/2016
L = WidthP = DepthH = HeightPr = Price code
173White
CORIAN®
Natural minerals with acrylic polymers and pigments
FRONT PANELSPANELSTOPSBACK PANELSHOOD PANELS
080Black
PAPERSTONE®
100% eco-friendly matt material, made of recycled paper, resins not derived from petroleum and natural colours
OPEN-FACED UNITS
NEW
CUSTOMISED COLOURS ARE NOT FEASIBLE
CUSTOMISED COLOURS ARE NOT FEASIBLE
Certifications: FSC - NSF® - Rainforest Alliance - U.S. Green Building Council.
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
16 01/2016
L = WidthP = DepthH = HeightPr = Price code
240Marble White Carrara
248Bihara Stone
250Serena Stone
199GraniteBlack absoluteZimbabwe
259Quartzite Calacatta
200Cardoso Stone
258Quartzite Brown Chocolate
257Quartzite Silver
245Matraia Stone
254Granite Black Cosmic
TOPSBACK PANELS
STONE - MARBLE - GRANITE
Matt finish
Stone A Stone A Stone A
Stone B Stone B Stone B
Stone C Stone C
Stone EStone E
951Lava stone, grey
Stone DNEW
The price category is indicated inside the relative image.
* Customised stone, marble or granite require the feasibility approval by Boffi. They will be subject to an extra charge and lead time increase, which will be defined by single case.
It’s possible to send feasibil-ity requests for CUSTOM-ISED STONES, MARBLES OR GRANITES*
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
1701/2016
L = WidthP = DepthH = HeightPr = Price code
The price category is indicated inside the relative image.
* Customised colours (to be chosen from the Silestone® by Cosentino colour chart) require the feasibility approval by Boffi. They will be subject to an extra charge and lead time increase, which will be defined by single case.
432Expo grey
433Concrete grey
435Tebas black
437Lagoon white
439Merope grey-brown
431Zeus white
440Doradus black
436Yukon white
434Unsui brown
438Kensho grey
COMPOSITE SILESTONE®
Matt finish
Stone C Stone C Stone C
Stone D
Stone D
Stone D Stone D
Stone D
Stone D
Stone D
TOPSBACK PANELS
NEW
NEW
NEW
NEW
NEW
It’s possible to send feasibil-ity requests for CUSTOM-ISED COLOURS *
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
18 01/2016
L = WidthP = DepthH = HeightPr = Price code
452Kadum brown
453Sirius black
455Edora beige
456Irok beige
458Korus grey
451Strato grey
459Galema brown
454Zenith White
457Ventus grey
COMPOSITE DEKTON®
Matt finish
Stone D Stone DStone D
Stone E
Stone EStone E
Stone E
Stone E
Stone E
TOPSBACK PANELS
It’s possible to send feasibil-ity requests for CUSTOM-ISED COLOURS *
The price category is indicated inside the relative image.
* Customised colours (to be chosen from the Dekton® by Cosentino colour chart) require the feasibility approval by Boffi. They will be subject to an extra charge and lead time increase, which will be defined by single case.
NEW
NEW NEW
NEW
NEW
NEW
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
1901/2016
L = WidthP = DepthH = HeightPr = Price code
Stainless steel finish
PLINTHS / HANDRAILS / SPACERS
Painted matt white *
EXTRUDED ALUMINIUM PROFILE PLINTHSHANDRAILSSPACERS
Painted matt black
Painted bright white(Lamicolor® 754) **
CUSTOMISED COLOURS ARE NOT FEASIBLE
* The colour matt White is recommended for matches with white Corian® 173 / Kos white Lasermat 183 / white Silcover 003 / Arctic white Ecolak 510 / white Polyester 003.
** The colour bright White (Lamicolor® 754) is recommended for matches with Malè white Lasermat 178 / bright white Silcover 133 (Lami-color® 754) / bright white Ecolak 511.
Attention!XILA ST plinths, handle-rails and spacers are feasible only in stainless steel or matt white painted finishes.
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materi-als may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
These issues can not be considered cause for a complaint
C o l o u r s - W o o d s p e c i e s
20 01/2016
L = WidthP = DepthH = HeightPr = Price code
P r i c e r a n g eFURNITURE
FURNITUREPRICE RANGE TYPE OF MATERIAL COLOURS / SPECIES PRICE
DECOMAT
AH LAMINATE
Bi-laminate with laser welded edges
HPL laminate, AH edge in aluminium or wood (with white laminate the dyed edge is welded with Laser technique)
Supreme white / Pebble grey
LAMINATE colour range / ABET COLOURS range
LASERMAT Nanotechnological matt “soft touch” surface, with dyed edge, welded with Laser technique
LASERMAT colour range
SILCOVER Matt lacquered, fine texture SILCOVER colour range
GLASS Tempered glass Extra-light frosted painted White / Dove grey / Coffee
ECOLAK Water-based, “soft touch” matt lacquered ECOLAK colour range
WOOD Veneer wood Oak / Ash-grey oak / Grey-graphite oak / Larch wood, As-pen white / Larch wood, Orion black / Black Eco-wood
POLYESTER
WOOD SELECTION
METALS
Polyester hi gloss lacquer
Veneer wood
Metal-effect lacquer
POLYESTER colour range
Core walnut / Thermo-treated acacia wood (brushed)
Aluminium / Titanium / Lead
Frame WK6 + GLASS Aluminium frame with tempered glass All glasses of GLASS range (frosted excluded)
WOOD 3D
WOOD LT
CORIAN®
STAINLESS STEEL
ALUMINIUM
Frame FACTORY + GLASS
Veneer wood, planks effect
Veneer wood with lateral frames, LT handle
Corian®
Box section stainless steel
Anodised aluminium
Aluminium frame with tempered glass
Core walnut / Thermo-treated acacia wood (brushed) / Black Eco-wood
Oak / Ash-grey oak / Grey-graphite oak
White
Pre-satin
Steel / Dark
All glasses of GLASS range
WOOD SELECTION LT Veneer wood with lateral frames, LT handle Core walnut / Thermo-treated acacia wood (brushed) (Price = WOOD LT + 6%)
SOLID WOOD
SOLID WOOD 3D
Solid wood (even surface)
Solid wood (planks, alternating thickness 20 / 23 mm)
Canaletto LIGHT walnut “sawn-effect“ / Canaletto walnut “sawn-effect“ / “Old“ grey pinewood
Canaletto LIGHT walnut “sawn-effect“ / Canaletto walnut “sawn-effect“
_
+
Some cabinets, for technical reasons, may have restrictions and/or price relationships different from what indicated on this chart.
2101/2016
L = WidthP = DepthH = HeightPr = Price code
P r i c e r a n g eWORKTOPS
WORKTOPSPRICE RANGE TYPE OF MATERIAL COLOURS / SPECIES PRICE
LAMINATE with wood edge HPL laminate with wood edge LAMINATE colour range / ABET COLOURS range (edge in all colours of WOOD range)
LAMINATE, aluminium profile HPL laminate with aluminium profile LAMINATE colour range / ABET COLOURS range
LASERMAT Nanotechnological matt “Soft Touch” surface with laser welded edges
LASERMAT colour range
LASERMAT, stainless steel profile Nanotechnological “Soft Touch” surface with alu-minium profile, stainless steel finish
LASERMAT colour range
WOOD Veneer wood All species WOOD range
GLASS Tempered glass Extra-light frosted painted White / Dove grey / Coffee
WOOD SELECTION Veneer wood All species WOOD SELECTION range
CORIAN ® Corian® White
Polished ST. STEEL
Matt satin ST. STEEL
Stainless steel boxed structure
Stainless steel boxed structure
Polished
Matt-satin
C.R.S. SCOTCH BRITE ST. STEEL Stainless steel boxed structure Scotch Brite, matt satin
SOLID WOOD
STAVES IN SOLID WOOD SELECTION
Solid wood, multi-layered support.
Solid wood with grooves, multi-layered support.
Canaletto LIGHT walnut “sawn-effect“ / Canaletto walnut “sawn-effect“ / “Old“ grey pinewood
Oak / Grey-graphite oak / Larch wood, Orion black / Ther-mo-treated acacia wood (brushed)
STONE A Marble, stone, granite, composites. White Carrara marble/ Bihara stone / Serena stone
STONE B Marble, stone, granite, composites. Matraia stone / Absolute black Zimbabwe granite / Cardoso stone
STONE C Marble, stone, granite, composites. Quartzite Silver / Granite Black Cosmic / Silestone® Expo grey / Silestone® Concrete grey / Silestone® Tebas black
DURINOX® Stainless steel Micro-sandblasted finish
STONE D Marble, stone, granite, composites. Lava stone grey / Silestone® Zeus white / Silestone® La-goon white / Silestone® Yukon white / Silestone® Ken-sho grey / Silestone® Unsui brown / Silestone® Merope grey-brown / Silestone® Doradus black / Dekton® Kadum brown / Dekton® Sirius black
STONE E Marble, stone, granite, composites. Quartzite Calacatta / Quartzite Brown Chocolate / Dek-ton® Zenith white / Dekton® Irok beige/ Dekton® Edora beige/ Dekton® Strato grey/ Dekton® Ventus grey/ Dek-ton® Korus grey/ Dekton® Galema brown
_
+
Some worktops, for technical reasons, may have restrictions and/or price relationships different from what indicated on this chart.
22 01/2016
L = WidthP = DepthH = HeightPr = Price code
CARCASS (A)
• It’s made of 19 mm thick wood particle board panels, waterproof (class V100 - In compli-ance with EN317 standards), with low formaldehyde emission (class E1 - In compliance with EN717+EN 120 / CARB P2 standards), treated with high performance melamine resin. Front and back edges in ABS, same colour.
• Back panel made of 3,5 mm thick MDF Medium Density fibres board, treated with high performance melamine resin, in same finish as carcass. The back panels of Hide tall units are 8 mm. thick.
• Each carcass is fitted with a soft close system (Blumotion): the device is integrated In the hinge on hinged doors and in the glide on drawers. In some specific cases the Blumotion device is installed on the carcass (instead of hinge/glide).
• On the bottom of under-sink base units an aluminium cover is provided (B) in order to protect the bottom from possible water leaks. Customised under-sink base units are not provided with aluminium-covered bottom (this can be provided upon request, with extra charge).
• Side panels are connected in the back through longitudinal beams in black anodised aluminium.
• All drillings holes for shelving are filled with galvanised metal bushes.• It is possible to ask for finished side panels in all finishes, except for Decomat - Glass -
Aluminium - Solid wood, for these three please add finished end panels. By requesting the finished side panel the frontal edge of it is finished too (Laminate - Lasermat excluded).
• Feet are made of zinc-plated steel and nylon with height adjustment. Foot support is made of plastic resin and installed with pressure on the bottom of the carcass. The feet of base and tall units are shipped in one or more packages, accordingly to each composition.
• Hardware, when used, is made of anti-oxidation treated nickel-plated metal.• The nominal carcass width has a ± 1 mm allowance.
COLOURS / SPECIES: 130 Silk white / 608 Open pore grey-graphite oak.
SHELVES (C)
• They are made of 19 mm thick wood particle board panels, waterproof (class V100 - In compliance with EN317 standards), with low formaldehyde emission (class E1 - In compliance with EN717+EN 120 / CARB P2 standards), treated with high performance melamine resin. Front and back edges in ABS, same colour.
• On request, with an extra charge (see chapter “Customised solutions - Price Increases - Maintenance” ), it is possible to use extruded aluminium shelves, 16 mm thick (D), produced with special joining connection; not possible for corner units or for units with customised depth which will use always traditional melamine shelves (finished as carcass).
• Base units and tall units with linear corner are available with revolving chromium-plated metal wire shelves or pull-out storage mechanisms FLY MOON, SMART CORNER and CONVOY.
• Shelves brackets in stainless steel, equipped with a special blocking device.
• ATTENTION ! - To avoid any breakage, please move the shelves using ONLY the screwdriver. DO NOT use the cordless drill or other tools.
HINGES
• Hinges are nickel moulded, thickness 1,2mm with special spring breaking device, adjust-ment in height, depth and width. Opening angle 95° (E) or 155° (F). The hinge board is a die cast alloy safely attached to the side panel. Special hinges are supplied for steel or aluminium frames doors (glass doors with WK6 or Factory frames).
• Every hinge has a Blumotion soft close system (excluded those cases where a special installation is required).
G e n e r a l t e c h n i c a l i n f o r m a t i o nCARCASSES / HARDWARE
A B
C
E
D
F
2301/2016
L = WidthP = DepthH = HeightPr = Price code
J
PLINTH
• Made of aluminium extruded profiles. • Exclusive telescopic device performing height adjustment (Height 80 mm: -0 / +20 mm ,
Height 120/150/210 mm: -5/+20 mm) and, on the side, feet distance adjustment.• Completed with a gasket between plinth and floor (Boffi esthetical and functional patent
applied).• Cut-out on aluminium profile for refrigerator ventilation (G1) (please add the cut-out for
plinth cod. ZZIDB01, see page 24.4).
HEIGHTS: 50 - 80 - 120 - 150 - 210 mm.
FINISHES: Stainless steel (G) / Matt white painted / Matt black painted / Bright white painted (Lamicolor® 754).
“AVENTOS“ SYSTEM FOR FLAP DOORS (J)
• Door may be stopped in any position; soft close device; 3d door adjustment; balance adjustment according to weight.
• The device has a special cover in grey plastic.• Available, with extra charge, version with motor, activated by pressure; motor is
installed adjacent to the standard device (J1).
LOWER BAND, FOR OPENING THE WALL UNIT DOOR (H)
• In painted extruded aluminium, placed between the wall unit side panels.
FINISHES: matt white painted on melamine silk white carcasses / matt black painted on melamine grey-graphite oak carcasses.
PLATE-RACKS FOR WALL UNITS (K)
• Structure in polished stainless steel, removable drip tray. Plastic (transparent, nontoxic and dishwasher safe) elements for dishes, cutlery and glasses.
HARDWARE FOR WALL UNITS OR SUSPENDED BASE UNITS (L)
• In reinforced polyamide resin.• Internal adjustment devices are galvanised chromium plated steel and die cast aluminium.• Please drill the wall as indicated (L1).
G e n e r a l t e c h n i c a l i n f o r m a t i o nCARCASSES / HARDWARE
G G1
30 30
55 55
L L1
H K
J1
24 01/2016
L = WidthP = DepthH = HeightPr = Price code
LEGRABOX DRAWERS/ HEAVY-DUTY DRAWERS (standard) (M)
• Side and back panels in matt black painted steel. • Soft closing device.• Bottom panel made of 16 mm. thick wood particle board, melamine-coated. Bottom is
provided with non-toxic anti-slip mat.• Sides of the short drawer (with front panel high up to H 190 mm): H 91 mm (type M) (*).• Sides of the mid-height heavy-duty drawer (with front panel high up to H 370 mm): H
177 mm (type C).• Sides of the tall heavy-duty drawer (with front panel higher than H 370 mm): H 241 mm
(type F) (**) .• All internal drawers (N) are provided with melamine-coated front panel, same finish as
carcass (***).• Customised width is available with extra charge: in those cases (only for Legrabox) drawer
will always be provided with melamine-coated back panel, instead of the metal one. • Glides are in galvanized steel and run on stabilized carriages.• Total extraction. Capacity 40 or 70 kg as reported in drawers capacity chart.• Compatible internal accessories: DOMESTICI - EASY - PREMIÉRE - STORAGE SYSTEM
- AMBIALINE.• Compatible dustbins: TECNOKIT T2 - PREMIÉRE.
DRAWERS/ HEAVY-DUTY DRAWERS, ALUMINIUM Design Boffi (internal only, optional with extra charge) (P)
• Side and back panels made of aluminium extruded profiles with exclusive joining system. • Soft closing device.• Bottom panel made of 16 mm. thick wood particle board, treated with high performance
melamine. Bottom is provided with atoxic anti-slip mat.• Sides of the short drawer: H 113 mm (*).• Sides of the tall heavy-duty drawer: H 246 mm (**).• A special internal side spacer must be used for specific configurations with hinged door.• Compatible units: W. 300 - 450 - 600 - 900 - 1200 mm• Glides are in galvanized steel and run on stabilized carriages.• Total extraction. Capacity 30 kg.• Compatible internal accessories: EASY - STORAGE SYSTEM (Q).
CAPACITY CHART
G e n e r a l t e c h n i c a l i n f o r m a t i o nCARCASSES / HARDWARE
450 / 500 L > 750 mm
70 kg
600
70 kg
450 / 500 L 750 mm
40 kg40 kg
270350 / 400
270350 / 400
40 kg
450500 / 600
70 kg40 kg
400
PULL OUT70 kg
450500 / 600
PULL OUT
Single pull-out door CANNOT be proposed with TIP-ON push-opening mechanism.
N
****
**
*
**
M
P Q
2501/2016
L = WidthP = DepthH = HeightPr = Price code
23
R= 2 mm
1
3
2
type AHAprile > type SH
DECOMAT - Bi-laminate
1. Wood particle board panel, waterproof (class V100), with low formaldehyde emission (class E1 / CARB P2).
2. Treated with high performance melamine resin.3. Polypropylene edge applied with laser technique (edge seam hard to be perceived).
Because of technical reasons, all panels with width shorter than 100 mm will be provided with 1 edge in ABS (3 edges in polypropylene).
Colours: Supreme white / Pebble grey.
LAMINATE AH - Laminate HPL with external edge (see point 3)
1. Wood particle board panel, waterproof (class V100), with low formaldehyde emission (class E1 / CARB P2).
2. Laminate HPL thickness 0,9 mm.3. Edge 1,2 mm thick available in 3 options: a > on Boffi white laminate 003 or white 151 door, the edge Is in white polypropylene ap-
plied with Laser technique. This edge is feasible ONLY in these colours. b > solid aluminium. c > Wood. Colours: Laminate > LAMINATE Boffi range or ABET COLOURS range. Edge of doors and panels in Boffi white 003 or white 151 > white. Edge of doors and panels in other colours > aluminium / wood (WOOD / WOOD SELEC-
TION range).
SILCOVER - Matt lacquered, fine textured
1. MDF medium density fibres board.2. First coat of isolating paint Primer.3. Bi-components solvent fine textured paint Silcover.
Colours: SILCOVER range.
3
23
22
1
3
22
22
1
type AHAprile > type SH
type AHAprile > type SH
G e n e r a l t e c h n i c a l i n f o r m a t i o nDOORS / FRONT PANELS
LASERMAT - Nanotechnological matt “Soft Touch” surface
1. Wood particle board panel, waterproof (class V100), with low formaldehyde emission (class E1 / CARB P2).
2. Covered with nanotechnological decorative paper (NTM).3. Polypropylene edge applied with laser technique (edge seam hard to be perceived).
Because of technical reasons, all panels with width shorter than 100 mm will be provided with 1 edge in ABS (3 edges in polypropylene).
Colours: LASERMAT range.
3
23
221
type AHAprile > type SH NEW
Feasible for: PROGRAMMA STANDARD - APRILE - XILA - XILA ST.
Feasible for: PROGRAMMA STANDARD - APRILE - XILA - XILA ST.
Feasible for: PROGRAMMA STANDARD - APRILE - XILA - XILA ST - HIDE - ON-OFF ST.
Feasible for: PROGRAMMA STANDARD - APRILE - XILA - XILA ST - HIDE - ON-OFF ST.
PROGRAMMA STANDARD - APRILE - XILA - XILA ST
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials and technical construction of the door/front panels.
26 01/2016
L = WidthP = DepthH = HeightPr = Price code
G e n e r a l t e c h n i c a l i n f o r m a t i o nDOORS / FRONT PANELS
3
23
22
1
R= 1R= 1
3
23
22
1
R= 1R= 1
WOOD - Veneer wood
1. Wood particle board panel, waterproof (class V100), with low formaldehyde emission (class E1 / CARB P2) or in MDF medium density fibres board.
2. Wood veneer 0,6 mm thick, painted in 2 steps with acrylic or water based matt paints (bot-tom layer + finish layer). Vertical grain (XILA ST excluded which has an horizontal grain)
3. Wood edge 1 mm thick.
Species: WOOD range (on XILA ST available only Oak 049 / black Eco-wood 100).
WOOD SELECTION - Veneer wood
1. Wood particle board panel, waterproof (class V100), with low formaldehyde emission (class E1 / CARB P2) or in MDF medium density fibres board.
2. Wood veneer 0,6 mm thick, brushed, painted in 2 steps with acrylic or water based matt paints (bottom layer + finish layer). Vertical grain.
3. Wood edge 1 mm thick.
Species: Thermo-treated acacia wood (brushed) / Core walnut.
POLYESTER - Polyester hi gloss lacquer
1. MDF medium density fibres board.2. Three Polyester resin layers (each 320 gr/m2) sanded, smoothed and polished.
Colours: POLYESTER range.
type AHAprile > type SH
type AHAprile > type SH
type AHAprile > type SH
23
R= 2 mm
12
12
23
3
R= 2 mm
type AHAprile > type SH
ECOLAK - Matt “Soft Touch” lacquer
1. MDF medium density fibres board.2. First coat of isolating paint Primer.3. Water-based matt bi-components paint, double layers: the two coats are cross-applied.
Colours: ECOLAK range.
NEW
Feasible for: PROGRAMMA STANDARD - APRILE - XILA - HIDE - ON-OFF ST.
Feasible for: PROGRAMMA STANDARD - APRILE - XILA - HIDE.
Feasible for: PROGRAMMA STANDARD - APRILE - XILA - HIDE - ON-OFF ST.
Feasible for: PROGRAMMA STANDARD - APRILE - XILA - XILA ST - HIDE - ON-OFF ST.
PROGRAMMA STANDARD - APRILE - XILA - XILA ST
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials and technical construction of the door/front panels.
2701/2016
L = WidthP = DepthH = HeightPr = Price code
STAINLESS STEEL - Box section stainless steel
1. Filling panel made of light inert material.2. Box section pre-satin stainless steel, thickness 0,8 mm (vertical satin direction). Thickness
allowance: +0 / -1 mm.
Colours: pre-satin stainless steel (vertical satin).
type AHAprile > type SH
type AHAprile > type SH
23
1
22
CORIAN®
1. Inner and outer face, edges made of white Corian®, thickness 4 mm.2. MDF medium density fibres panel with honeycomb structure.
Colours: White.
23
1
1
2
G e n e r a l t e c h n i c a l i n f o r m a t i o nDOORS / FRONT PANELS
type AHAprile > type SH
METALS - Metal-effect lacquer
1. MDF medium density fibres board.2. Mixture of acrylic paints with metal particles. Applied with 4/5 distinct mechanical and
manual processes.
Colours: METALS range.
HANDLE: compatible ONLY with external handles.
12
23
R= 2 mm
NEW
23
19 4
3
4
1
2
GLASS
1. Wood particle board panel, waterproof (class V100), with low formaldehyde emission (class E1 / CARB P2).
2. Treated with high performance melamine resin.3. ABS edge thickness 1 mm colour white, black or stainless steel (always matching handrail
colour used in the composition).4. EXTRA-LIGHT frosted glass, varnished, tempered, thickness 4 mm. Bevelled on inner and
outer edges.
ATTENTION ! Please consider that glasses with same colours but different thickness (ex: door 4 mm / top 12 mm) have always different tones. Colour of possible replacements or completions, may not match exactly the original one.
Colours: Glass > Extra-light frosted varnished White / Dove grey / Coffee. Support > Silk white / Grey-graphite oak. Edge support > White / Black / Stainless steel.
type BV
Feasible for: PROGRAMMA STANDARD - APRILE - XILA - HIDE - ON-OFF ST.
Feasible for: PROGRAMMA STANDARD - APRILE - XILA - ON-OFF ST.
Feasible for: PROGRAMMA STANDARD - APRILE - XILA.
Feasible for: PROGRAMMA STANDARD wall units - XILA base units.
PROGRAMMA STANDARD - APRILE - XILA
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials and technical construction of the door/front panels.
28 01/2016
L = WidthP = DepthH = HeightPr = Price code
G e n e r a l t e c h n i c a l i n f o r m a t i o nDOORS / FRONT PANELS
type AHAprile > type SH
22
19 3
3
412
ALUMINIUM
1. Wood particle board panel, waterproof (class V100), with low formaldehyde emission (class E1 / CARB P2).
2. Treated with high performance melamine resin, in same finish as carcass.3. 1 mm thick edge in ABS white, black or steel finish.4. 3 mm. thick anodised aluminium sheet, STEEL (brushed finish) or DARK (micro-sandblasted
finish).
Colours: Aluminium > Steel / Dark. Support > Silk White / Grey-graphite oak. Support edge > White / Black / Stainless steel.
SOLID WOOD 3D (alternating thickness 20 / 23 mm) - Solid wood vertical slats
1. Slat of solid brushed wood, treated with 2 steps of colourless natural oil. Vertical grain. Horizontal “sawn effect”.
ATTENTION ! - Boffi 3D door has been designed to create a specific three dimensions effect: therefore
thicknesses and widths of solid wood vary on purpose in a specific untidy way. Upper doors (wall units) and lower doors (base units) may present slats mis-alignments.
- Solid wood, with time, may present, very naturally, small cracks not pertaining to the product’s quality.
These characteristics may not be used as a cause for a complaint.
Species: “Canaletto” walnut “sawn-effect” / Canaletto LIGHT walnut “sawn-effect“.
HANDLE: compatible ONLY with X3D handle, with a price increase (see page 21.15). Any frames for wine cellars should be provided with a verti-cal external handle.
WOOD 3D - Wood veneer slats effect
1. Wood particle board panel, waterproof (class V100), with low formaldehyde emission (class E1 / CARB P2) or in MDF medium density fibres board.
2. Wood veneer 0,6 mm thick, brushed, painted in 2 steps with acrylic or water based matt paints (bottom layer + finish layer). Vertical grain.
3. Wood edge thickness 1 mm.
ATTENTION ! - Boffi 3D door has been designed to create a specific three dimensions effect: therefore
thicknesses and widths vary on purpose in a specific untidy way. Upper doors (wall units) and lower doors (base units) may present staves mis-alignments.
- Possible small cracks on upper and lower edge may not be used as a cause for a com-plaint, because they are an integral part of the product itself and are due to the use of end-grain (cut perpendicularly) wood which gives a natural aspect to the door.
These characteristics may not be used as a cause for a complaint.
Species: Thermo-treated acacia wood (brushed) / Core walnut / Black Ecowood.
HANDLE: compatible ONLY with 3D and X3D handles, with a price increase (see page 21.15).
type BMAprile > type SM
type BMAprile > type SM
20
23
2
22
3
1
NEW
type AHAprile > type SH
SOLID WOOD (thickness 23 mm) - Solid wood layers
1. Brushed solid wood layer, treated with 2 steps of natural oil or oil-based paints and vegetal waxes. Vertical grain. Horizontal “sawn-effect” (only on species clearly indicated).
ATTENTION ! - Possible small cracks on upper and lower edge may not be used as a cause for a com-
plaint, because they are an integral part of the product itself and are due to the use of end-grain (cut perpendicularly) wood which gives a natural aspect to the door.
The above mentioned characteristics shall not be considered cause of complaint.
HANDLE: compatible ONLY with external handles or with X3L handle, with a price increase (see page 21.15). Any frames for wine cellars should be provided with a vertical external handle.
Species: Canaletto walnut “sawn-effect“ / Canaletto LIGHT walnut “sawn-effect“ / “Old“ grey pinewood.
23
1
1
1
23
1
1
1
1
1
Feasible for: PROGRAMMA STANDARD - APRILE - XILA.
Feasible for: PROGRAMMA STANDARD - APRILE - XILA.
Feasible for: PROGRAMMA STANDARD - APRILE - XILA.
Feasible for: PROGRAMMA STANDARD wall unitsAPRILE base and wall units - XILA base units.
PROGRAMMA STANDARD - APRILE - XILA
NEW
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials and technical construction of the door/front panels.
Other species“Old“ grey pinewood
2901/2016
L = WidthP = DepthH = HeightPr = Price code
WOOD LT / WOOD SELECTION LT - Veneer wood with lateral frames, LT handle
1. Support of the top strip in solid Toulipier wood.2. Wood veneer 0,6 mm thick, brushed, painted in 2 steps with acrylic or water based paints
(bottom layer + finish layer). Vertical grain on the central panel and vertical strips; horizontal grain on top strip.
3. Central panel and vertical strips made of wood particle board panel, waterproof (class V100), with low formaldehyde emission (class E1 / CARB P2) or in MDF medium density fibres board.
Species Wood: Oak / Ash-grey oak / Grey-graphite oak. Species Wood Selection: Thermo-treated acacia wood (brushed) / Core walnut (price
Wood LT+6%).
type APAprile > type SP
G e n e r a l t e c h n i c a l i n f o r m a t i o nDOORS / FRONT PANELS
Feasible for: PROGRAMMA STANDARD - APRILE.
Feasible for: PROGRAMMA STANDARD wall and tall units.
Feasible for: PROGRAMMA STANDARD wall and tall units.
PROGRAMMA STANDARD - APRILE
FRAME WK6 + GLASS - (Wall units and tall units Programma STANDARD)
1. Frame in naturally anodised aluminium profile.2. Tempered glass 4 mm thick.3. Inner layer in laminate.
Available glasses: GLASS range, excluded the frosted one.
FRAME FACTORY + GLASS - (Wall units and tall units Programma STANDARD)
1. Frame in naturally anodised aluminium profile.2. Tempered glass 4 mm thick.
Available glasses: GLASS range.
2
1 40
23
3
type BF
1
70
21
2
type BK
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials and technical construction of the door/front panels.
30 01/2016
L = WidthP = DepthH = HeightPr = Price code
G e n e r a l t e c h n i c a l i n f o r m a t i o nDOORS / FRONT PANELS
SILCOVER - ECOLAKPOLYESTER - METALS
K14
K14_SILCOVER - Matt lacquered fine textured
1. MDF medium density fibres board.2. First coat of isolating paint Primer.3. Bi-components solvent fine textured paint Silcover.
Colours: SILCOVER range.
K14_ECOLAK - Matt lacquered “Soft Touch”
1. MDF medium density fibres board.2. First coat of isolating paint Primer.3. Water-based matt bi-components paint, double layers: the two coats are cross-applied.
Colours: ECOLAK range.
K14_POLYESTER - Hi gloss lacquer polyester
1. MDF medium density fibres panel.2. Three Polyester resin layers (each 320 gr/m2) sanded, smoothed and polished.
Colours: POLYESTER range.
K14_METALS - Metal-effect lacquer
1. MDF medium density fibres board.2. Mixture of acrylic paints with metal particles. Applied with 4/5 distinct mechanical and
manual processes.
Colours: METALS range.
K14_CORIAN®
1. Inner and outer face made of white Corian® panel thickness 4 mm.2. Angled edge 30° made of solid Corian® thickness 19 mm.3. Honeycomb panel with solid pinewood frame.
Colours: White.
type BN
23
13
30°2
23
1
2
3
30°
K14_WOOD / WOOD SELECTION - Veneer wood
1. Wood veneer thickness 0,6 mm (first choice on both faces) painted in 2 steps with acrylic or water based matt paints (bottom layer + finish layer). Vertical grain.
2. Wood edge thickness 0,6 mm.3. MDF medium density fibres board.
Species WOOD: WOOD range. Species WOOD SELECTION: Thermo-treated acacia wood (brushed) / Core walnut.
type BN
type BN
WOODWOOD SELECTION
CORIAN®
23
3
1
230°
< NEW
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials and technical construction of the door/front panels.
3101/2016
L = WidthP = DepthH = HeightPr = Price code
G e n e r a l t e c h n i c a l i n f o r m a t i o nDOORS / FRONT PANELS
SOLID WOOD
K14
K14_SOLID WOOD (thickness 23 mm) - Solid wood layers
1. Brushed solid wood layer (th. about 8 mm), treated with 2 steps of natural oil or oil-based paints and vegetal waxes. Vertical grain. Horizontal “sawn-effect” (only on species clearly indicated).
ATTENTION ! - Possible small cracks on upper and lower edge may not be used as a cause for a com-
plaint, because they are an integral part of the product itself and are due to the use of end-grain (cut perpendicularly) wood which gives a natural aspect to the door.
The above mentioned characteristics shall not be considered cause of complaint.
Species: Canaletto walnut “sawn-effect“ / Canaletto LIGHT walnut “sawn-effect“ / “Old“ grey pinewood.
type BN
23
1
1
1
30°
K14_STAINLESS STEEL
1. Inner pre-satin stainless steel sheet 8/10 mm thick mm (vertical satin).2. Outer pre-satin stainless steel sheet 8/10 mm thick mm (vertical satin).3. Panel made of inert resin.
Colours: pre-satin stainless steel (vertical satin).
23
1
230°
32
type BN
STAINLESS STEEL
NEW
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials and technical construction of the door/front panels.
32 01/2016
L = WidthP = DepthH = HeightPr = Price code
K20_WOOD / WOOD SELECTION - Veneer wood
1. Wood particle board panel, waterproof (class V100), with low formaldehyde emission (class E1 / CARB P2) or in MDF medium density fibres board.
2. Wood veneer 0,6 mm thick (1st choice on both surfaces), painted in 2 steps with acrylic or water-based matt transparent varnishes (bottom layer + finish layer). Vertical grain.
3. Aluminium profile, stainless steel finish.
Species: WOOD range / WOOD SELECTION range. Grip finish: stainless steel.
K20_STAINLESS STEEL
1. Panel made of compounded aluminium.2. Box section pre-satin stainless steel, thickness 0,8 mm (vertical satin direction).3. Profile in satin stainless steel.
Colour: pre-satin stainless steel (vertical satin) Grip in satin stainless steel.
type BW
type BW
WOODWOOD SELECTION
STAINLESS STEEL
535
23
1
22
3
23
535
12
3
G e n e r a l t e c h n i c a l i n f o r m a t i o nDOORS / FRONT PANELS
K20
K20_SOLID WOOD (thickness 23 mm) - Solid wood layers
1. Brushed solid wood layer (th. about 8 mm), treated with 2 steps of natural oil or oil-based paints and vegetal waxes. Vertical grain. Horizontal “sawn-effect” (only on species clearly indicated).
2. Aluminium profile, stainless steel finish.
ATTENTION ! - Possible small cracks on upper and lower edge may not be used as a cause for a com-
plaint, because they are an integral part of the product itself and are due to the use of end-grain (cut perpendicularly) wood which gives a natural aspect to the door.
The above mentioned characteristics shall not be considered cause of complaint.
Species: Canaletto walnut “sawn-effect“ / Canaletto LIGHT walnut “sawn-effect“ / “Old“ grey pinewood.
Grip finish: stainless steel.
type BW
SOLID WOOD
23
1
11
535
2< NEW
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials and technical construction of the door/front panels.
3301/2016
L = WidthP = DepthH = HeightPr = Price code
G e n e r a l t e c h n i c a l i n f o r m a t i o nDOORS / FRONT PANELS
K20
K20_CORIAN® - Monolithic aspect
1. Panel made of 4 mm thick white Corian®.2. Honeycomb panel with solid pinewood frame.
Colour: White.
type BW
SILCOVER - ECOLAKMETALS
CORIAN®
23
1
2
14
35
K20_SILCOVER - Textured matt lacquer, monolithic aspect
1. MDF medium density fibres board.2. First coat of isolating paint Primer.3. Bi-components solvent fine textured varnish Silcover.
Colours: SILCOVER range.
K20_ECOLAK - Matt “Soft Touch” lacquer, monolithic aspect
1. MDF medium density fibres board.2. First coat of isolating paint Primer.3. Water-based matt bi-components paint, double layers: the two coats are cross-applied.
Colours: ECOLAK range.
K20_METALS - Metal-effect lacquer, monolithic aspect
1. MDF medium density fibres board.2. Mixture of acrylic paints with metal particles. Applied with 4/5 distinct mechanical and
manual processes.
Colours: METALS range.
type BW
< NEW
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials and technical construction of the door/front panels.
23
635
12
3
34 01/2016
L = WidthP = DepthH = HeightPr = Price code
G e n e r a l t e c h n i c a l i n f o r m a t i o nSTANDARD HANDLESNo extra charge.
220 / 370 / 520 / 820 / 1120
160 / 224 / 381 / 531 / 831= =
8
25
TRAVE WK6 “a” horizontal centred
Extruded aluminium natural anodised.
Available finishes: Decomat / Lami-nate AH / Lasermat / Silcover / Glass / Ecolak / Wood / Wood Selection / Metals / Polyester / Stainless steel / Corian® / Aluminium / Solid wood.
Satin stainless steel.
Available finishes: Decomat / Lami-nate AH / Lasermat / Silcover / Glass / Ecolak / Wood / Wood Selection / Metals / Polyester / Stainless steel / Corian® / Aluminium / Solid wood.
40
220
“b” horizontal left or right
MATERIAL ANDCOMPATIBILITY
STANDARDPOSITIONING
SERIES AND DIMENSIONS
128 / 381 / 531 / 831Ø 11
35
horizontal left or right
horizontal left or right
vertical left or right
GRAND CHEF
STEEL
40
224
239
15
1515
30
Extruded aluminium, stainless steel finish.
Available finishes: Decomat / Lami-nate AH / Lasermat / Silcover / Glass / Ecolak / Wood / Wood Selection / Metals / Polyester / Stainless steel / Corian® / Aluminium / Solid wood.
128
/ 224
/ 38
1 / 5
31 /
831
1535
Extruded aluminium natural anodised.
Available finishes: Decomat / Lami-nate AH / Lasermat / Silcover / Glass / Ecolak / Wood / Wood Selection / Metals / Polyester / Stainless steel / Co-rian® / Aluminium / Solid wood / Frame Factory+glass.
FACTORY
1) Please always specify on the order handles’ position: without info Boffi will consider standard position.2) When using wide external handles on hinged door, please always check possible opening interferences.3) With drawers, heavy-duty drawers, pull out and dishwashers, handles position is always centred on the door panel.
23
21
220
30
WK6 (POCKET) horizontal centred
Painted, moulded zinc alloy, with thermoplastic gasket.*
Colour: aluminium.
Available finishes: Decomat / Laminate AH (only with wood edge or laser welded edge) / Lasermat / Silcover / Ecolak / Wood / Wood Selection / Metals / Polyester / Corian® / Solid wood.
Minimal width for front panels / doors:- Front panels / drawers: 350 mm.- Doors: 300 mm.
Attention: to avoid opening interferences, it is not possible to use opposed wk6 pocket handles on tall unit with double doors.
* With Corian® doors, the handle is not moulded “zama” but obtained with a special cut out on the solid Corian® of the door perimeter.
3501/2016
L = WidthP = DepthH = HeightPr = Price code
G e n e r a l t e c h n i c a l i n f o r m a t i o nSTANDARD HANDLESNo extra charge.
MATERIAL ANDCOMPATIBILITY
“a” horizontal centred
“b” horizontal left or right
STANDARDPOSITIONING
SERIES AND DIMENSIONS
Milled Brass painted with aluminium finish.
Used on all doors with aluminium frame+glass.
Available finishes: Decomat / Lami-nate AH / Lasermat / Silcover / Glass / Ecolak / Wood / Wood Selection / Metals / Polyester / Stainless steel / Corian® / Alu-minium / Solid wood / Frame WK6+glass / Frame Factory+glass.
40
10
FRAMES
224
236
= = 30
39
40
220 / 370 / 520 / 820 / 1120
128/224/381/531/831
35 3525
811
16
8 17
40
HANDLE
T LINE
Moulded aluminium, painted or chrome finished.
Colours: chrome / white / black.
Available finishes: Decomat / Lami-nate AH / Lasermat / Silcover / Glass / Ecolak / Wood / Wood Selection / Metals / Polyester / Stainless steel / Corian® / Aluminium / Solid wood.
Extruded aluminium, stainless steel satin finish.
Available finishes: Decomat / Lami-nate AH / Lasermat / Silcover / Glass / Ecolak / Wood / Wood Selection / Metals / Polyester / Stainless steel / Corian® / Aluminium / Solid wood.
horizontal centred
40
220
40
Extruded aluminium painted or anodised stainless steel finish.
Colours: matt white / matt black / stain-less steel.
Available finishes: Decomat / Lami-nate AH / Lasermat / Silcover / Glass / Ecolak / Wood / Wood Selection / Metals / Polyester / Stainless steel / Corian® / Aluminium / Solid wood.
APRILE 2 horizontal centred
40
left or right
1) Please always specify on the order handles’ position: without info Boffi will consider standard position.2) When using wide external handles on hinged door, please always check possible opening interferences.3) With drawers, heavy-duty drawers, pull out and dishwashers, handles position is always centred on the door panel.
36 01/2016
L = WidthP = DepthH = HeightPr = Price code
220 / 370 / 520 / 820 / 1120 17
32
160 / 224 / 381 / 531 / 831= =
=
40
=
horizontal or verticalcentred
ZONE
200
25
20
20
All stainless steel.Touch latch opening with spring.
Available finishes: Decomat / Laser-mat / Silcover / Ecolak / Wood / Wood Selection / Metals / Polyester / Corian® / Solid wood.
X12 - X36 horizontal o verticalleft - right - centred
Obtained with a special cut out on door thickness. Handle’s inner part is painted to match door finish (for polyester> hi gloss / for wood> painted to match door species).
Available finishes: / Silcover / Ecolak / Wood / Wood Selection / Polyester / Corian®.
Solid varnished larch, horizontal grain. Two steps varnish with matt transparent paints (bottom layer + finish layer).
Feasible species: Larch wood, As-pen white / Larch wood, Orion black.
Obtained with a special cut out on door thickness.
Handle’s inner part is obtained with the following techniques:SILCOVER - ECOLAK > painted door finish.POLYESTER > painted hi gloss to match door colour. CORIAN® > solid Corian®, white.WOOD - WOOD SELECTION > Back panel in wood to match door finish; other handle inner surfaces painted to match door wood species.
Available finishes: / Silcover / Ecolak / Wood / Wood Selection / Polyester / Corian®.
60
30
25
23
30
25
23
30
25
23
LT
APRILE 2 - WOOD
60 60
horizontal centred
horizontal centred
STANDARDPOSITIONING
SERIES AND DIMENSIONS
SILCOVERECOLAKPOLYESTER CORIAN®
WOODWOOD SELECTION
40
G e n e r a l t e c h n i c a l i n f o r m a t i o nHANDLES WITH EXTRA CHARGEPlease add the price increase cod. JZMK01 to each door or front panel, see page 21.15.
MATERIAL ANDCOMPATIBILITY
1) Please always specify on the order handles’ position: without info Boffi will consider standard position.2) When using wide external handles on hinged door, please always check possible opening interferences.3) With drawers, heavy-duty drawers, pull out and dishwashers, handles position is always centred on the door panel.
3701/2016
L = WidthP = DepthH = HeightPr = Price code
Extruded anodised aluminium.
Colours: painted matt white – painted matt black – Satin stainless steel.
Handle 360 mm wide can not be used on doors shorter than 450 mm.
Available finishes: Silcover / Ecolak / Wood / Wood Selection / Metals / Polyester / Corian® / Solid wood.
ATTENTION !: handle with cut out is highly recommended for these follow-ing scenarios:
1 doors for dish washers, fridges and electric appliances in general
2 doors with opposed handles ( lower and upper )
3 doors with 2 opposed vertical handles adjacent
STANDARDPOSITIONING
SERIES AND DIMENSIONS
2327
50
173
100 / 360
100 / 360
27 23
50
APRILE
APRILE with cut-out
horizontalcentred
verticallower or upper(only 100 mm)
verticalnot centred on theside
20
2327
50
173
100 / 360
83 / 100
100 / 360
27 23
50
9
Handle ONLY horizontal.Made with special cut-out on door thick-ness, positioned on wider slat (146 mm).
Made with special cut-out on wider slat (146 mm). Not available with tall unit single door.
X3D
3D Available finishes: Wood 3D only.
Available finishes: Wood 3D and Solid Wood 3D only.
Available finishes: Solid wood only.
23 / 20
30
25
23 / 20
25
X 146146X146
XX
Distance X changes always according to direction and width required. No symme-try granted between right and left handles.
Distance X changes always according to direction and width required. No symme-try granted between right and left handles.
Lefthinged door
Drawers – Pull out Dishwasher door
Righthinged door
Lefthinged door
Drawers – Pull out Dishwasher door
Righthinged door
30
25
23
146 75 14675146= =
horizontal left horizontal centred horizontal right
X3L Handle ONLY horizontal.Not feasible on doors in grey old pine-wood 057.
G e n e r a l t e c h n i c a l i n f o r m a t i o nHANDLES WITH EXTRA CHARGEPlease add the price increase cod. JZMK01 to each door or front panel, see page 21.15.
MATERIAL ANDCOMPATIBILITY
1) Please always specify on the order handles’ position: without info Boffi will consider standard position.2) When using wide external handles on hinged door, please always check possible opening interferences.3) With drawers, heavy-duty drawers, pull out and dishwashers, handles position is always centred on the door panel.
38 01/2016
L = WidthP = DepthH = HeightPr = Price code
Position A – Horizontal centred
- On hinged doors, pull outs, drawers, heavy-duty drawers and flap doors
- Width 364 mm only for finish: Silcover, Ecolak, White Polyester, Corian®.
Position B – Horizontal left or right
- On hinged doors, pull outs, drawers and heavy-duty drawers maximum width 600 mm.
Position C – Vertical
- Only for tall unit single door.- Custom height positioning (according to
the project).
Position D - Vertical upper or lower
- only for hinged doors.- Only for finish: Silcover, Ecolak, White Polyester, Corian®.
180 / 364 ==
2525
DUEMILAOTTO Made with a special cut out on door thickness.
Available on finishes:
SILCOVER / ECOLAK: - Width 180 mm, positions A - B - C - D - Width 364 mm, positions A - C (on tall
units single door only position C)
POLYESTER: Available ONLY in colour white
cod.003. It is made with a special solid piece of Corian® inserted into the door thickness and then cut out. Therefore the “cut out” part is always white Corian® and different from all the rest of the door (polyester).
- Width 180 mm, positions A - B - C - D - Width 364 mm positions A - C (for tall
unit single door, only position C)
WOOD / WOOD SELECTION: Available ONLY in Ash-grey oak,
Grey-graphite oak, Black Eco-wood, Thermo-treated acacia wood (brushed), Core walnut.
- Width 180 mm, positions A - B - C - Width 364 mm positions C (on tall unit
single door)
CORIAN®: - Width 180 mm, positions A - B - C - D - Width 364 mm positions A - C (on tall
unit single door, only position C)
180 / 364
180
180
180
/ 364
STANDARDPOSITIONING
SERIES AND DIMENSIONS
G e n e r a l t e c h n i c a l i n f o r m a t i o nHANDLES WITH EXTRA CHARGEPlease add the price increase cod. JZMK01 to each door or front panel, see page 21.15.
MATERIAL ANDCOMPATIBILITY
1) Please always specify on the order handles’ position: without info Boffi will consider standard position.2) When using wide external handles on hinged door, please always check possible opening interferences.3) With drawers, heavy-duty drawers, pull out and dishwashers, handles position is always centred on the door panel.
3901/2016
L = WidthP = DepthH = HeightPr = Price code
= =
40
40
238
GRIP
238 / 395 / 545 / 845 / 1145
224 / 381 / 531 / 831 / 1131
50
77
25
Extruded aluminium, stainless steel finish.
Available finishes: Decomat / Laser-mat / Silcover / Ecolak / Wood / Wood Selection / Metals / Polyester / Corian® / Solid wood.
ATTENTION !!!“a“ positioning is compatible ONLY with pull-out frontal panels.
*= 35 mm on HIDE doors.
vertical left or right
Vertical, upper or lower,right or left
STANDARDPOSITIONING
SERIES AND DIMENSIONS
MATERIAL ANDCOMPATIBILITY
“a” horizontal centred
“b” horizontal left or right
NEW
NEW
1) Please always specify on the order handles’ position: without info Boffi will consider standard position.2) When using wide external handles on hinged door, please always check possible opening interferences.3) With drawers, heavy-duty drawers, pull out and dishwashers, handles position is always centred on the door panel.
G e n e r a l t e c h n i c a l i n f o r m a t i o nHANDLES WITH EXTRA CHARGEPlease add the price increase cod. JZMK01 to each door or front panel, see page 21.15.
209523052465
210923192479
212623362496
=
50 40*
ø 25
=
130515151585
755685
21262336
50 40*
131915291599
769699
133615461616
786716
ø 25
40 01/2016
L = WidthP = DepthH = HeightPr = Price code
G e n e r a l t e c h n i c a l i n f o r m a t i o n CHART FOR HANDLES COMPATIBILITY
Decom
at
AH
Lam
inate
Lase
rmat
Silc
ove
r
Gla
ss
Ecola
k
Wood
Wood
Sele
ctio
n
Meta
ls
Poly
est
er
Sta
inle
ss S
teel
Corian®
Alu
min
ium
Wood
3D
Fra
me W
K6 +
gla
ss
Fra
me F
acto
ry +
g
lass
Solid
Wood
Solid
Wood
3D
Trave WK6 O O O O O O O O O O O O O O
Grand chef O O O O O O O O O O O O O O
Steel O O O O O O O O O O O O O O
Factory O O O O O O O O O O O O O O O
WK6 (Pocket) O O1
O O O O O O O O O
Handle O O O O O O O O O O O O O O
T Line O O O O O O O O O O O O O O
Frames O O O O O O O O O O O O O O O O
Aprile 2 O O O O O O O O O O O O O O
Aprile 2 Wood O2
Zone O O O O O O O O O O
X12 - X36 O O O O O O
LT O O O O O O
Aprile O O O O O O O O
3D O
X3D O O
X3L O
Duemilaotto O O O3
O O4
Grip O O O O O O O O O O O O O O
1 = only on AH laminate with wood edge or laser welded edge.2 = only Aspen white and Orion black larch wood.3 = only ash-grey oak, grey-graphite oak and black Ecowood.4 = only on polyester white 003 (internal part of handle in Corian®).
4101/2016
L = WidthP = DepthH = HeightPr = Price code
A
B
C
E
A - LAMINATE with wood edge / Thickness: 40 - 60 mmStructure made of wood particle board panel with low formaldehyde emission (class E1), waterproof (class V100). Wood edges; top and bottom surfaces plated in highly-resistant HPL laminate (back-overlaying laminate on bottom surface).
• Colours: Boffi LAMINATE range or ABET COLOURS range.• Edges: species Boffi WOOD range (not feasible in WOOD SELECTION finish).
• Max. length: 4150 mm (003 Boffi white / 140 Boffi cream / 145 Boffi sand / 144 Boffi dove-grey / 149 Boffi grey / 148 Boffi dark grey) - 2970 mm (151 white [410] / Abet Colours range).
• Max. depth: 1370 mm (003 Boffi white / 140 Boffi cream / 145 Boffi sand / 148 Boffi dark grey) - 1260 mm (151 white [410] / 144 Boffi dove-grey / 149 Boffi grey / Abet Colours range).
B - LAMINATE with aluminium profile / Thickness: 40 - 60 mmStructure made of wood particle board panel with low formaldehyde emission (class E1), waterproof (class V100). Edges made of natu-
rally anodised aluminium profile; plated on 2 surfaces in high-resistant HPL laminate (back-overlaying laminate on bottom surface).
• Colours: Boffi LAMINATE range or ABET COLOURS range.• Edge: naturally anodised aluminium profile.
• Max. length: 4150 mm (003 Boffi white / 140 Boffi cream / 145 Boffi sand / 144 Boffi dove-grey / 149 Boffi grey / 148 Boffi dark grey) - 2970 mm (151 white [410] / Abet Colours range).
• Max. depth: 1370 mm (003 Boffi white / 140 Boffi cream / 145 Boffi sand / 148 Boffi dark grey) - 1260 mm (151 white [410] / 144 Boffi dove-grey / 149 Boffi grey / Abet Colours range).
C - LASERMAT with edge welded with laser technique / Thickness: 12 - 20 - 40 mmStructure made of wood particle board panel with low formaldehyde emission (class E1), waterproof (class V100), plated with Lasermat nanotechnological paper. Dyed edge in polypropylene, welded with laser technique (edge seam hard to be perceived).
• Colours: LASERMAT range.• • Max. length: 3200 mm.• Max. depth: 1260 mm.
D - LASERMAT with aluminium profile, stainless steel finish / Thickness: 40 - 60 mmStructure made of wood particle board panel with low formaldehyde emission (class E1), waterproof (class V100). Edges made of anodised aluminium profile, stainless steel finish; plated on 2 surfaces in high-resistant HPL laminate (back-overlaying laminate on bottom surface.
• Colours: Boffi LASERMAT range.• Edge: anodised aluminium profile, stainless steel finish.
• Max. length: 4150 mm.• Max. depth: 1260 mm.
E - WOOD VENEER / Thickness: 20 - 40 - 60 mmStructure made of wood particle board panel with low formaldehyde emission (class E1), waterproof (class V100). Two wood veneer layers on top surface (double wood veneer plating on bottom surface). Painted with transparent, polyurethane or acrylic paints. Wood edges.
• Species: WOOD Boffi range or WOOD SELECTION Boffi.
• Max. length: 2800 mm (black Eco-wood: 3300 mm).• Max. depth: 1260 mm (for deeper tops please check the feasibility).
G e n e r a l t e c h n i c a l i n f o r m a t i o nWORKTOPS
D
STANDARD WORKTOPS - Compatible with PROGRAMMA STANDARD, XILA, XILA ST (Xila ST: max. thickness 60 mm).See codes and prices in WORKTOPS chapter.
1) Worktops with customised depth (not indicated on the price list) are available within the MAXIMUM DEPTH limits specified. Please forward your out-of-standard depth request to Boffi’s commercial department.
42 01/2016
L = WidthP = DepthH = HeightPr = Price code
G e n e r a l t e c h n i c a l i n f o r m a t i o nWORKTOPS
H
G
F - SOLID WOOD / Thickness: 40 - 60 - 110 - 190 mmStructure made of panels in poplar multi-layer wood. Surfaces and edges covered by solid wood layers, 5 mm thick, assembled used a 45° “folding“ technique. Finished with matt transparent water-based paints.WARNING ! - The worktop in SOLID WOOD differs from the one made of SOLID WOOD STAVES because its surface is completely even, without any groove between the wood layers/staves (F1).
• Species: LIGHT Canaletto walnut, “sawn-effect “ / Canaletto walnut “sawn-effect “ / “Old“ grey pinewood.
• Max. length: 3000 mm.• Max. depth: 1260 mm (for deeper tops please check the feasibility).
G - SOLID WOOD STAVES / Thickness: 40 - 60 - 110 - 190 mmStructure made of panels in poplar multi-layer wood. Surfaces and edges covered by solid wood layers, 5 mm thick with staves effect, assembled used a 45° “folding“ technique. Finished with matt transparent water-based paints.WARNING ! - The worktop in SOLID WOOD STAVES differs from the one made of SOLID WOOD because its surface has grooves between the wood layers/staves (G1).
• Species: Oak / grey-graphite oak / Orion black larch wood / thermo-treated acacia wood.
• Max. length: 3000 mm.• Max. depth: 1260 mm (for deeper tops please check the feasibility).
H - GLASS / Thickness: 12 mmExtra-light tempered glass, painted and frosted. Edges bevelled and satin.
• Colours: White / Dove-grey / Coffee.
• Max. length: 3650 mm.• Max. depth: 1260 mm (for deeper tops please check the feasibility).
F
F1
F1
STANDARD WORKTOPS - Compatible with PROGRAMMA STANDARD, XILA, XILA ST (Xila ST: max. thickness 60 mm).See codes and prices in WORKTOPS chapter.
1) Worktops with customised depth (not indicated on the price list) are available within the MAXIMUM DEPTH limits specified. Please forward your out-of-standard depth request to Boffi’s commercial department.
4301/2016
L = WidthP = DepthH = HeightPr = Price code
G e n e r a l t e c h n i c a l i n f o r m a t i o nWORKTOPS
I
L - POLISHED STAINLESS STEEL, rounded edges / Thickness: 12 mmStructure in compounded aluminium. Outer structure in AISI 304, th. 1 mm, box section stainless steel; 45° lower and upper rounded edges.Worktops are joined by default as shown in the picture (L1). For different joining typologies please check feasibility in advance.
• Max. length: 4000 mm.• Max. depth: 1260 mm (for deeper tops please check the feasibility).
MATT SATIN STAINLESS STEEL, rounded edges / Thickness: 12 mmStructure in compounded aluminium. Outer structure in AISI 304, th. 1 mm, box section stainless steel; 45° lower and upper rounded edges.Worktops are joined by default as shown in the picture (L1). For different joining typologies please check feasibility in advance.
• Max. length: 4000 mm.• Max. depth: 1260 mm (for deeper tops please check the feasibility).
C.R.S. SCOTCH BRITE STAINLESS STEEL, rounded edges / Thickness: 12 mmStructure in compounded aluminium. Outer structure in AISI 304, th. 1 mm, box section stainless steel; 45° lower and upper rounded edges.Worktops are joined by default as shown in the picture (L1). For different joining typologies please check feasibility in advance.
• Max. length: 5000 mm.• Max. depth: 1260 mm (for deeper tops please check the feasibility).
L
I - POLISHED STAINLESS STEEL, square-edged / Thickness: 20 - 40 - 60 - 110 - 190 mmStructure made of wood particle board panel with low formaldehyde emission (class E1), waterproof (class V100). The structure of 20 mm thick tops only is in compounded aluminium. The 60-110-190 mm thick worktops are provided with lower wooden frame on the perimeter. Outer structure in AISI 304, th. 1 mm, box section stainless steel.Worktops are joined by default as shown in the picture (I1). For different joining typologies please check feasibility in advance.
• Max. length: 4000 mm.• Max. depth: 1260 mm (for deeper tops please check the feasibility).
MATT SATIN STAINLESS STEEL, square-edged / Thickness: 20 - 40 - 60 - 110 - 190 mmStructure made of wood particle board panel with low formaldehyde emission (class E1), waterproof (class V100). The structure of 20 mm thick tops only is in compounded aluminium. The 60-110-190 mm thick worktops are provided with lower wooden frame on the perimeter. Outer structure in AISI 304, th. 1 mm, box section stainless steel.Worktops are joined by default as shown in the picture (I1). For different joining typologies please check feasibility in advance.
• Max. length: 4000 mm.• Max. depth: 1260 mm (for deeper tops please check the feasibility).
C.R.S. SCOTCH BRITE STAINLESS STEEL, square-edged / Thickness: 20 - 40 - 60 - 110 - 190 mmStructure made of compounded aluminium. The 110-190 mm thick worktops are provided with white melamine-coated lower panel in wood particle board, with low formaldehyde emission (class E1), waterproof (class V100). Outer structure in AISI 304, th. 1 mm, box section stainless steel.Worktops are joined by default as shown in the picture (I1). For different joining typologies please check feasibility in advance.
• Max. length: 5000 mm.• Max. depth: 1260 mm (for deeper tops please check the feasibility).
R
I1
L1
M - CORIAN® / Thickness: 12 - 20 - 40 - 60 - 110 - 190 mmWorktops th. 12 mm: solid Corian®.Other thicknesses: structure in compounded aluminium. Upper surface and edges are covered with Corian®. The 40 - 60 - 110 - 190 mm thick worktops are provided with white melamine-coated lower panel in wood particle board, with low formaldehyde emission (class E1), waterproof (class V100).
• Colour: White.
• Max. length: 3650 mm.• Max. depth: 1260 mm (for deeper tops please check the feasibility).
M
STANDARD WORKTOPS - Compatible with PROGRAMMA STANDARD, XILA, XILA ST (Xila ST: max. thickness 60 mm).See codes and prices in WORKTOPS chapter.
1) Worktops with customised depth (not indicated on the price list) are available within the MAXIMUM DEPTH limits specified. Please forward your out-of-standard depth request to Boffi’s commercial department.
44 01/2016
L = WidthP = DepthH = HeightPr = Price code
G e n e r a l t e c h n i c a l i n f o r m a t i o nWORKTOPS
N - DURINOX® / Thickness: 12 - 20 - 40 mmStructure made of wood particle board panel with low formaldehyde emission (class E1), waterproof (class V100). Boxed with 1 mm thick Durinox® (micro-sandblasted steel sheet).
• Max. length: 3800 mm.• Max. depth: 1260 mm.
Q - Composite SILESTONE® - MATT finish / Thickness: 12 - 20 - 40 - 60 - 110 - 190 mmMatt finish, oil-repellent and waterproof treated, with bacteriostatic protection.Composite stone composed of 94% natural quartz and 6% polymer and colouring pigments. Extraordinarily hard and resistant. Thickness 12-20 mm: solid composite. For other thicknesses: edge and face in 20 mm thick composite stone matched with 45° folding technique. Structure in thermosetting polymer polyurethane foam (light, stable over time, waterproof and resistant to thermal shock). For thicknesses 110-190 mm a lower wooden frame on the perimeter is being provided.
• Colours: Expo grey / Concrete grey / Tebas black / Zeus white / Yukon white / Lagoon white / Unsui brown / Kensho grey / Merope grey-brown / Doradus black.
• Max. length: 3230 mm.• Max. depth: 1570 mm.
P - MARBLE / STONE / GRANITE - MATT finish / Thickness: 20 - 40 - 60 - 110 - 190 mmMatt finish, oil-repellent and waterproof treated, not resistant to weak acids (fruit, tomatoes, citrus etc.) that can alter and corrode the surface. Thickness 20 mm: solid marble, stone or granite. For other thicknesses, edge and face in 20 mm thick solid marble, stone or granite matched with 45° folding technique. Structure in thermosetting polymer polyurethane foam (light, stable over time, waterproof and resistant to thermal shock). For thicknesses 110-190 mm a lower wooden frame on the perimeter is being provided.The worktops edges are lightly rounded: they are joined by default as shown in the picture (P1). For different joining typologies please check feasibility In advance.Option available, without extra charge, top with washbasin effect (P2) made with squared and combined slabs (only for 40-60-80 mm thick worktops).Option available, with extra charge (see “Customised Solutions- Price Increases- Maintenance” chapter), polished finish and, for absolute black Zimbabwe granite only, flamed brushed finish.
• Typologies: Carrara white marble / Bihara stone / Serena stone / Matraia stone / Cardoso stone / absolute black Zimbabwe granite / Black Cosmic granite / quartzite Silver / quartzite Calacatta / quartzite Brown Chocolate/ grey lava stone.
• Max. length 2500 mm: Cardoso stone.• Max. length 2800 mm (th. 20 mm max 2200 mm): Bihara stone.• Max. length 2870 mm: quartzite Brown Chocolate.• Max. length 2900 mm: quartzite Calacatta.• Max. length 3000 mm: grey lava stone.• Max. length 3050 mm (th. 20 mm max 2500 mm): Serena stone.• Max. length 3050 mm (th. 20 mm max 2800 mm): Matraia stone.• Max. length 3050 mm: Carrara white marble / absolute black Zimbabwe granite / Black Cosmic granite / quartzite Silver.• Max. depht 980 mm (Cardoso stone).• Max. depht 1260 mm (all stones, marbles and granites - in all thicknesses, Cardoso stone excluded).
N
Q
P
P
P2
STANDARD WORKTOPS - Compatible with PROGRAMMA STANDARD, XILA, XILA ST (Xila ST: max. thickness 60 mm).See codes and prices in WORKTOPS chapter.
NEW
P1
1) Worktops with customised depth (not indicated on the price list) are available within the MAXIMUM DEPTH limits specified. Please forward your out-of-standard depth request to Boffi’s commercial department.
4501/2016
L = WidthP = DepthH = HeightPr = Price code
G e n e r a l t e c h n i c a l i n f o r m a t i o nWORKTOPS
R - Composite DEKTON® - MATT finish / Thickness: 12 - 20 - 40 - 60 - 110 - 190 mmMaterial composed of sophisticated blend of raw materials used to produce the very latest in glass and porcelain as well as the highest quality quartz work surfaces. Dekton employs exclusive Sinterized Particle Technology, a high tech process which represents an accelerated version of the metamorphic change that natural stone undergoes when subjected to high temperatures and pres-sure. Electronic microscopy allows us to fully appreciate the material zero porosity and chemical resistance, a consequence of the sinterization and ultra-compaction process exclusive to this material.Thickness 12-20 mm: solid composite. For other thicknesses: edge and face in 20 mm thick composite stone matched with 45° folding technique. Structure in thermosetting polymer polyurethane foam (light, stable over time, waterproof and resistant to thermal shock). For thicknesses 110-190 mm a lower wooden frame on the perimeter is being provided.
• Colours: Edora beige / Kadum brown / Sirius black / Zenith white / Irok beige / Strato grey.
• Max. length: 3200 mm.• Max. depth: 1440 mm.
S - SOLID “OLD“ PINEWOOD, for PENINSULA COMPOSITIONS / Thickness: 80 mmIt’s composed of solid pinewood boards, recycled from renovation of old houses, barns and huts. Edges perpendicular to the grain direction are white painted.Possible cracks and deformations have to be considered characteristic part of the product. Since these tops are very unique, they have the typical appeal of “imperfect things” and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Tops obtained with old wooden boards offer a clear example of the wood vitality and instability.For this reasons each piece in solid wood has to be considered “unique“ and different from all the other ones.The above mentioned characteristic shall not be considered cause of complaint.
• Max. length: 3000 mm.• Max. depth: 1800 mm.
R
SPECIFIC WORKTOPS - PENINSULA TOP IN OLD PINEWOODSee codes and prices in PENINSULA COMPOSITIONS chapter
DEDICATED WORKTOPS - APRILE, K14, K20.See codes and prices in APRILE, K14, K20 chapters.
The APRILE, K14, K20 kitchens mount worktops with specific thicknesses and details.Please see features and finishes in relative chapters.
S
APRILE
K20
K14
STANDARD WORKTOPS - Compatible with PROGRAMMA STANDARD, XILA, XILA ST (Xila ST: max. thickness 60 mm).See codes and prices in WORKTOPS chapter.
NEW
1) Worktops with customised depth (not indicated on the price list) are available within the MAXIMUM DEPTH limits specified. Please forward your out-of-standard depth request to Boffi’s commercial department.
46 01/2016
L = WidthP = DepthH = HeightPr = Price code
600
600
900
900
1200
1200
2050
/202
0
2210
/218
0
1580
/161
0
2490
/242
0
Ø 1
20/1
50Ø
120
/150
Ø 1
50Ø
150
080
120
150
210
1880
/191
020
00
CA
B
400
1000
2300
2400
==
==
==
150
==
==
==
==
==
==
==
700
150
150
150
Ele
ctr
ic s
ocke
t
Wate
r d
ischarg
e u
nit
Warm
wa
ter
feed
er
Cold
wate
r fe
ed
er
Gas
feed
er
DIA
GR
AM
OF
WA
TE
R O
UT
LE
TA
= m
inim
um
heig
ht o
f w
ate
r o
utle
t: 4
00
mm
.B
= m
inim
um
heig
ht o
f w
arm
/co
ld w
ate
r fe
ed
er:
45
0 m
m.
C=
recom
mend
ed
dis
tan
ce
be
twe
en
wa
rm a
nd
co
ld w
ate
r fe
ed
ers
: 1
50
/20
0 m
m.
AT
TE
NT
ION
: dra
win
gs
an
d s
ize
s in
the
dia
gra
m a
re n
ot b
ind
ing
an
d m
ay
vary
ac
co
rdin
g
to th
e ty
pe o
f sin
k and
sip
hons
use
d. A
s to
pro
vid
e fo
r the m
axi
mum
sp
ace in
the u
nd
er-
sink
unit,
we s
ug
gest
yo
u p
lac
e p
ipe
s a
nd
sip
ho
ns
as
far
ba
ck
an
d a
s h
igh
as
po
ssib
le. D
urin
g
the in
stalla
tion,
ple
ase
ch
ec
k th
e s
ize
an
d th
e lo
ca
tion
of th
e d
ust
bin
.
Ove
nG
as
feed
er
Dis
hw
ash
er
Socke
t on b
ack
panel
Und
er-
sink
unit
In-
an
d o
utle
t fo
r w
ate
rO
ven w
. 900 m
mG
as
feed
er
Ele
ctr
ic p
late
Built
-in h
ood
LE
D li
ght b
ar
Wall
unit
spots
607 /
WD
35 h
ood
FLA
T /
GLA
SS
/LIE
VE
ho
od
CE
ILIN
G/T
ILE
/.K
AP
PA/G
HO
ST
ho
od
H. under-hood
H. plinths
H. kitchen
Ga
s b
urn
er
ign
itio
nG
as
fee
de
r
Min
. 7
50
fo
r re
-circ
ula
ting
ve
rsio
nM
in. 8
50
fo
r e
xte
rna
lly v
en
ted
ve
rsio
n
N o t e s t o d e s i g n e rTECHNICAL INSTALLATION CHART
4701/2016
L = WidthP = DepthH = HeightPr = Price code
N o t e s t o d e s i g n e rELECTRICAL APPLIANCES
GENERAL INDICATIONS
Knobs for electrical appliances design Boffi.
Electrical appliances design Boffi
This price list offers a wide range of exclusive cooktops, sinks and hoods design Boffi.All gas cooktops design Boffi are set for methane gas use. The use of different gases must be always specified on the order.
C.R.S. - Finishes: stainless steel / polished stainless steel / matt black.Control knob for hob and/or pop-up plug.
Control knob for HOB: in STAINLESS STEEL only (1). The stainless steel knob C.R.S. is installed on all hobs design Boffi in C.R.S. Scotch Brite or matt satin stainless steel (except for items when not expressly indicated).
Control knob for POP-UP PLUG: in STAINLESS STEEL (1) / POLISHED STAINLESS STEEL (2) / MATT BLACK (3). Sinks can be fitted with the relative automatic strainer waste kit with C.R.S. knob, please specify the finish (see page 19.27).
QUADRO - Finish: satin chrome.Control knob for hob.
It’s installed on all hobs in polished stainless steel (except for items when not expressly indicated).
Boffi recommended electrical appliances
Boffi S.p.A. offers a suitable “Recommended Electrical appliances, taps and sinks” price list including any recommended brand, available on the restricted area of www.boffi.com website, which is constantly updated. Any appliance recommended by Boffi complies with the EC standards for 220÷230V - 50Hz voltage.The prices of Boffi recommended electrical appliances include the cost of installing appliances in carcasses (of finished front panels when under-top appliances/hoods are used); except for cases in which the assembly is not recommended for technical, safety or handling reasons.
Electrical appliances by Client
Please add a price increase cod. ZNAA20 (see page 21.12) for each cabinet arranged for client’s electrical appliances. All electrical appliances NOT purchased through Boffi , even If included in the “Recommended Electrical Appliances, taps and sinks” price list, are subjected to an additional price.Each order containing Client’s electrical appliances needs to include the codes list (brand specification too) and the TECHNICAL SPECIFICATIONS WITH CUT-OUT DRAWING.The orders without the technical specifications required are not processed till receiving these info.
C.R.S.
C.R.S.
C.R.S.
QUADRO
1
2
3
48 01/2016
L = WidthP = DepthH = HeightPr = Price code
ELECTRICAL APPLIANCES AT THE END OF COMPOSITION
It’s not possible to use under-top electrical appliances (dishwashers, refrigerators, freezers, wine cellars etc.) at the end of composition, because the end side panels cannot be properly fixed.
ELECTRICAL APPLIANCES CLOSE TO WALL
It’s not suggested to use electrical appliances close to wall (without filler): possible wall imper fections can interfere with the electrical appliance avoiding the correct opening mechanism. Claims for these reasons are not accepted.
Please consider always to add a filler between wall and electrical appliance. The filler has to be measured according to the electrical appliance type and technical info (given by the producer).
CUSTOMISED ANGLES
Please measure carefully when the angles are customised following these notes: 1. measure the “Y” diagonal, which connects 2 points distant 1000 mm from the corner 2. if the “Y” diagonal measure is different from 1414 mm ( Y = 1414 mm the X angle is 90°) please Indicate the exact quote on the order.
OK
X
1000
1000
Y<1414
X<90°
1000
1000
Y>1414
X>90°
1000
1000
Y=1414
X=90°
N o t e s t o d e s i g n e rELECTRICAL APPLIANCES / SITE DIMENSION SURVEY
4901/2016
L = WidthP = DepthH = HeightPr = Price code
N o t e s t o d e s i g n e rPROTRUDING WORKTOPS
PROGRAMMA STANDARD - XILATHICKNESSES 20 / 40 mm
≤ 350
20* / 40
650 - 830 980 - 1260
≥ 150
**
≤ 330
20* / 40
980
**
≤ 290
20* / 40
1260
**
40
**
9801260
330290
≤ 350
≥ 150
Protruding part ON THE SIDE
• Not available on 12 mm thick worktops.• * = Not available on 20 mm thick worktops in Durinox®, stone, marble or granite.• Lateral protruding part can be proposed on 40 mm thick worktops in all finishes listed
on the price list.• On 20 mm thick worktops the protruding part on the side cannot be matched with the
back one (corner protruding top).• ** = hob or sink hole, if necessary.
Protruding part ON THE BACK
• Not available on 12 mm thick worktops.• * = Not available on 20 mm thick worktops in Durinox®, stone, marble or granite.• Back protruding part can be proposed on 40 mm thick worktops in all finishes listed
on the price list.• On 20 mm thick worktops the protruding part on the back cannot be matched with the
lateral one (corner protruding top).• ** = hob or sink hole, if necessary.• Please fasten the base units to the floor for avoiding overturning risks (hardware to be
supplied by the Customer).
Protruding part ON THE CORNER
• Not available on 12 and 20 mm thick worktops.• Corner protruding part can be proposed on 40 mm thick worktops in all finishes listed
on the price list.• ** = hob or sink hole, if necessary.• Please fasten the base units to the floor for avoiding overturning risks (hardware to be
supplied by the Customer).
50 01/2016
L = WidthP = DepthH = HeightPr = Price code
N o t e s t o d e s i g n e rPROTRUDING WORKTOPS
≤ 400
≥ 60
650 - 830 980 - 1260
≥ 150
**
≤ 1000
≥ 60
650 - 830 980 - 1260
≥ 150
**
Solo per Corian® e InoxFor Corian® and Stainless steel onlySeulement pour Corian® et InoxNur für Corian® und EdelstahlSólo para Corian® y Inox
PROGRAMMA STANDARD - XILATHICKNESSES 60 / 80 / 110 / 190 mm
≤ 330
≥ 60
980
**
≤ 290
1260
**
≥ 60
≥ 60
**
9801260
330290
≤ 400
≥ 150
Protruding part ON THE SIDE
• Lateral protruding part can be proposed on 60 /80 / 110 /190 mm thick worktops in all finishes listed on the price list.
• The protruding part, when included between 400 and 1000 mm, can be proposed on worktops in Corian® or Stainless Steel only. It’s not possible to have lateral protruding parts 400 mm matched with the back one (corner protruding top).
• ** = hob or sink hole, if necessary.
Protruding part ON THE BACK
• Back protruding part can be proposed on 60 /80 / 110 /190 mm thick worktops in all finishes listed on the price list.
• ** = hob or sink hole, if necessary.• Please fasten the base units to the floor for avoiding overturning risks (hardware to be
supplied by the Customer).
Protruding part ON THE CORNER
• Corner protruding part can be proposed on 60 /80 / 110 /190 mm thick worktops in all finishes listed on the price list.
• ** = hob or sink hole, if necessary.• Please fasten the base units to the floor for avoiding overturning risks (hardware to be
supplied by the Customer).
5101/2016
L = WidthP = DepthH = HeightPr = Price code
N o t e s t o d e s i g n e rPROTRUDING WORKTOPS
APRILE
** ≤ 350
≥ 150
≤ 330
980
**
≤ 290
10
1260
**
10
**
Protruding part ON THE SIDE
• Lateral protruding part can be proposed ONLY on worktops in MATT SATIN STAIN-LESS STEEL (visible front thickness: 10 mm).
• ** = hob or sink hole, if necessary.• The protruding part on the side cannot be matched with the back one (corner protrud-
ing top).
Protruding part ON THE BACK
• Back protruding part can be proposed ONLY on worktops in MATT SATIN STAINLESS STEEL (visible front thickness: 10 mm).
• ** = hob or sink hole, if necessary.• The protruding part on the back cannot be matched with the lateral one (corner pro-
truding top).
Protruding part ON THE CORNER
• Not available.
52 01/2016
L = WidthP = DepthH = HeightPr = Price code
N o t e s t o d e s i g n e rPROTRUDING WORKTOPS
Protruding part ON THE SIDE 400 mm
• Lateral protruding part can be proposed on worktops in all finishes listed on the price list.
• ** = hob or sink hole, if necessary.
Protruding part ON THE SIDE 400 / 1000 mm
• Lateral protruding part can be proposed ONLY on worktops in Stainless Steel / Co-rian® / Solid wood staves
• ** = hob or sink hole, if necessary.
Protruding part ON THE BACK
• Back protruding part can be proposed on worktops in all finishes listed on the price list.
• ** = hob or sink hole, if necessary.• Please fasten the base units to the floor for avoiding overturning risks.
Protruding part ON THE CORNER
• Corner protruding part can be proposed on worktops in all finishes listed on the price list.
• ** = hob or sink hole, if necessary.• Please fasten the base units to the floor for avoiding overturning risks.
K14
≤ 400
795 - 1175≥ 150
**
≤ 1000
795 - 1175≥ 150
**
≤ 400
1175
**
1175
**
≤ 400
≤ 400
≥ 150
5301/2016
L = WidthP = DepthH = HeightPr = Price code
N o t e s t o d e s i g n e rPROTRUDING WORKTOPS
Protruding part ON THE SIDE
• Thickness 12 mm: feasible ONLY on worktops in polished stainless steel, matt satin stainless steel, CRS Scotch Brite stainless steel and Silestone®.
• Thickness 20 / 40 / 60 mm: please see directions for Programma Standard / Xila protruding worktops.
• ** = hob or sink hole, if necessary.
Protruding part ON THE BACK
• Thickness 12 mm: feasible ONLY on worktops in polished stainless steel, matt satin stainless steel, CRS Scotch Brite stainless steel and Silestone®.
• Thickness 20 / 40 / 60 mm: please see directions for Programma Standard / Xila protruding worktops.
• ** = hob or sink hole, if necessary.• Please fasten the base units to the floor for avoiding overturning risks (hardware to be
supplied by the Customer).
Protruding part ON THE CORNER
• Thickness 12 mm: feasible ONLY on worktops in polished stainless steel, matt satin stainless steel, CRS Scotch Brite stainless steel and Silestone®.
• Thickness 20 / 40 / 60 mm: please see directions for Programma Standard / Xila protruding worktops.
• Please check the dimensional limits referring to information for lateral and back pro-truding top.
• ** = hob or sink hole, if necessary.• Please fasten the base units to the floor for avoiding overturning risks (hardware to be
supplied by the Customer).
≤ 285
650 - 830 980 - 1260
12
≥ 150
**
≤ 276
980
**
≤ 175
830
**
≤ 282
1260
**
12
12
12
**
8309801260
175276282
≤ 285
≥ 150
12
XILA STTHICKNESS: 12 mm ( For 20 / 40 / 60 mm thicknesses: please see directions for Programma Standard / Xila protruding worktops).
54 01/2016
L = WidthP = DepthH = HeightPr = Price code
N o t e s t o d e s i g n e rPROTRUDING WORKTOPS
100
980
878
**
100
1260
**
1158
100A
A
**
B
B
**
330
100
285
A-A
B-B
***
Protruding part ON THE BACK, for worktops in Corian®
• Feasible on worktops 12 mm thick in Corian® and in all other finishes of the price list.• Visible handle-rail long the entire perimeter.• Lateral or corner protruding parts are not available.• ** = hob or sink hole, if necessary.• *** = Rear base unit (Programma STANDARD) with push opening.
XILA STTHICKNESS: 12 mm ( For 20 / 40 / 60 mm thicknesses: please see directions for Programma Standard / Xila protruding worktops).
5501/2016
L = WidthP = DepthH = HeightPr = Price code
S a f e t y n o t e s
ANTI-OVERTURN
In order to avoid overturning risks, all tall units must be necessarily fixed to the wall with appropri-ate hardware by Client (please select those according to the wall type and characteristics. Draw-ing here used is just to be considered as an example).
56 01/2016
L = WidthP = DepthH = HeightPr = Price code
O r d e r p r e p a r a t i o n
fornooven
frigoriferorefrigerator
lavastovigliedishwasher
2460
980
600 120060023 23
786 870
786 870
600 600 600 60023 23 600 600 600 60023 23
2446
628
786
80
2336 2420
10 50
20 30 40
190191
200
210
160
170
60 70 80 90
100 150
110 120 130 140
180 181
220
ORDER EXAMPLE- Programma Standard
LINES10 End panel (per square metre) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 976 x 870 x 23 mm SBAYNT01 0,8520 Under-sink base unit with pull-out door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 x 625 x 790 mm BCBBT60N 1,0030 Dishwasher door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 596 x 23 x 786 mm DDBC022 1,0040 Under-hob base unit with 2 drawers+1 heavy-duty drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1200 x 625 x 790 mm BCBBI12N 1,0050 End panel (per square metre) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 976 x 870 x 23 mm SBAYNT01 0,8560 base unit with hinged door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 x 345 x 790 mm BCAAA60N S 1,0070 base unit with hinged door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 x 345 x 790 mm BCAAA60N D 1,0080 base unit with hinged door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 x 345 x 790 mm BCAAA60N S 1,0090 base unit with hinged door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 x 345 x 790 mm BCAAA60N D 1,00100 End panel (per square metre) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 628 x 2420 x 23 mm SBAYNT01 1,52110 tall unit with hinged door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .600 x 625 x 2340 mm CYBAC60N S 1,00120 tall unit with hinged door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .600 x 625 x 2340 mm CYBAC60N D 1,00130 tall unit for oven with 2 heavy-duty drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .600 x 625 x 2340 mm CYBAU60N S 1,00140 tall unit for refrigerator with 2 doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .600 x 625 x 2340 mm CYBDR60N D 1,00150 End panel (per square metre) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 628 x 2420 x 23 mm SBAYNT01 1,52160 stainless steel plinth H 80 mm (per linear metre) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400 x 80 mm ABAO007 2,40170 stainless steel plinth H 80 mm (per linear metre) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400 x 80 mm ABAO007 2,40180 stainless steel plinth H 80 mm (per linear metre) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400 x 80 mm ABAO007 2,40 181 Cut-out on plinth for refrigerator ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZZIDB01 1,00190 worktop in Corian® (per linear metre) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2460 x 980 x 20 mm TRACRA05 2,46 191 Cut-out for built-in - semi-flush-mounted sink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZNAB01 2,00200 Quadro - Semi-flush-mounted sink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 x 480 x 200 mm LHTCAA01 1,00210 R - Semi-flush-mounted hob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 920 x 520 x 66 mm VFRBQS02 1,00220 Stainless steel mixer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REAA1 1,00
HEADER• Carcass: melamine-coated, grey-graphite oak. Melamine-coated shelves.• Side panel: H 790 mm.• Plinth: H 80 mm.• Finish: Ecolak arctic white 510• Door type: AH (square-edged)• Handle: STEEL• Handle position: standard.• Worktops: white Corian® th. 20 mm.• Electrical appliances (dishwasher, oven, refrigerator): MIELE > (please provide list from “Boffi Recommended electric appliances, taps and sinks price list”).
ATTENTION !!!
In case of electric appliances provided by Client, please always provide codes list and TECHNICAL SPECIFICA-TIONS WITH CUT-OUT DRAWINGS. Please apply price increase cod. ZNAA20 (see page 21.12).
5701/2016
L = WidthP = DepthH = HeightPr = Price code
P r i c e c h e c kPRICE COMPARING, SAME KITCHEN WITH DIFFERENT FINISHES
2276,7
2005,9
1883,9
1563,6
1440,6
1369,3
1091,5
1000 1500 2000 2500 3000 3500
2380,5
2468,6
2589,0
2814,2
2968,2
+ 5,2 %
+ 8,5 %
+ 6,5 %
+ 13,5 %
+ 25,4 %
+ 4,6 %
+ 3,7 %
+ 4,9 %
+ 25,4 %
+ 32,0 %
+ 43,2 %
+ 72,6 %
+ 83,8 %
+ 108,6 %
+ 118,1 %
+ 126,2 %
+ 137,2 %
+ 157,8 %
+ 171,9 %
+ 8,7 %
+ 5,5 %
+ 20,5 %
2954,8
2684,0
2562,0
2241,7
2118,7
2047,4
1769,7
1000 1500 2000 2500 3000 3500 4000
3058,6
3146,8
3267,1
3492,3
3646,3
+ 3,5 %
+ 5,8 %
+ 4,8 %
+ 10,1 %
+ 15,7 %
+ 3,5 %
+ 2,9 %
+ 3,8 %
+ 15,7 %
+ 19,7 %
+ 26,7 %
+ 44,8 %
+ 51,7 %
+ 67,0 %
+ 72,8 %
+ 77,8 %
+ 84,6 %
+ 97,3 %
+ 106,0 %
+ 6,9 %
+ 4,4 %
+ 14,3 %
678,1
678,1
678,1
678,1
678,1
678,1
678,1
678,1
1883,9
2005,9
2276,7
2380,5
2468,6
678,1
678,1
678,1
2589,0
2814,2
2968,2
678,1
1091,5
1440,6
1563,6
1369,3
The kitchen considered is the one of the “order example” , listed on the previous page.In order to be able to make a comparison we considered for all the finishes:• Handle: STEEL, except for Solid Wood 3D finish where the X3D integrated handles are used (the only compatible), with relative price increase.• Worktop: Corian® th. 20 mm, square-edged.• Tap, semi-flush-mounted hob and sink are included in the price. Other appliances are not included. Prices are expressed in price codes.
FINISHES
FINISHES
CABINETS ONLY (TOP NOT INCLUDED)
COMPLETE KITCHEN WITH TOP
Silcover
Silcover
Ecolak
Ecolak
Wood
Wood
Wood LT
Wood LT
Stainless steel
Stainless steel
Corian®
Corian®
Wood 3D
Wood 3D
Solid wood
Solid wood
Solid wood 3D
Solid wood 3D
CABINETS - Price code
COMPLETE KITCHEN – Price codeTop Cabinets
Finishes % Increase
Finishes % increase
Decomat % increase
Decomat % increase
Laminate AH / Decomat
Laminate AH / Decomat
Polyester / Metals / Wood Selection
Polyester / Metals / Wood Selection
Lasermat
Lasermat
58 01/2016
L = WidthP = DepthH = HeightPr = Price code
M a i n t e n a n c e - U s e
SPECIFIC PRODUCTS - HINTS
Boffi suggests the use of the Boffi Clean Set (cod. AVBL022) and of the specific cleaning products indicated on the price list (see page 21.20).As a general advice, if Clean Set Boffi is not available, please do not use products that might scratch, such as abrasive powders and chemicals, solvents or strong acids. Please do not forget that, although Boffi works hard to ensure protection from water, the worst enemies of your kitchen are steam and humidity. We recommend to wipe always very well kitchen after cleaning.Possible oil stains, food particles, weak acids (vinegar and lemon) must be cleaned away immediately.
Recommended cleaning agents
Clean with dry cloth and multipurpose cream (Boffi Clean Set) or the Casa 9, Multipurpose cleaner by Nuncas. For in-depth cleaning add a degreaser de-tergent to water, as Casa 9 Strong Floor Degreaser by Nuncas. If these specific products are not available, please use a moist cloth for daily cleaning and a neutral detergent for in-depth cleaning.Dry well with soft or microfibre cloth.
Clean with dry cloth and multipurpose cream (Boffi Clean Set) or the Casa 9, Multipurpose cleaner by Nuncas. For in-depth cleaning add a degreaser de-tergent to water, as Casa 9 Strong Floor Degreaser by Nuncas. If these specific products are not available, please use a moist cloth for daily cleaning and a neutral detergent for in-depth cleaning.Dry well with soft or microfibre cloth.
Clean with dry cloth and multipurpose cream (Boffi Clean Set) or the Casa 9, Multipurpose cleaner by Nuncas, or the specific detergent included in the clean-ing kit for Lasermat (cod. AVBL025).For in-depth cleaning add a degreaser detergent to water, as Casa 9 Strong Floor Degreaser by Nuncas. If these specific products are not available, please use a moist cloth for daily cleaning and a neutral detergent for in-depth cleaning.Dry well with soft or microfibre cloth.
Clean with dry cloth and multipurpose cream (Boffi Clean Set) or the Casa 9, Multipurpose cleaner by Nuncas. For in-depth cleaning add a neutral detergent to water, as Winto Parquet by Nuncas. Dry well with soft or microfibre cloth. If these specific products are not available, please use a dry cloth for daily cleaning and a generic window cleaning agent, insisting in case of pos-sible stains.
Harmful cleaning agents
Abrasive products and products contain-ing chlorine.
Abrasive products or products containing chlorine or turpentine.
Abrasive detergents, alkaline or products containing chlorine or turpentine.Dust spray and furniture wax as these could change the matt finish.
Abrasive detergents and creams.Dust spray and furniture wax as these could change the matt finish.
Precautions and advice
Attention: Do not clean edges using products containing thinners or acetone.
HPL type laminate used for Boffi worktops is a high pressure laminate and conse-quently does not scratch and is resistant to the following: water/ steam, stains, high impact and abrasion.
Lasermat is highly scratch, steam, water, stain, impact and abrasion resistant. Do not wipe with strongly abrasive products.
When cleaning a new bathroom you may find colour residue on the cloth. This is normal and due to particles of paint that in the drying process rise to the surface. Please remove these particles cleaning the surface with a sponge and a neutral detergent as Winto Parquet by Nuncas.
MELAMINE-COATED SURFACES
SURFACES IN LAMINATE
SURFACES IN LASERMAT
SURFACES IN SILCOVER AND ECOLAK
5901/2016
L = WidthP = DepthH = HeightPr = Price code
Recommended cleaning agents
Clean with dry cloth and multipurpose cream (Boffi Clean Set) or the Casa 9, Multipurpose cleaner by Nuncas. For in-depth cleaning add a neutral detergent to water, as Winto Parquet by Nuncas. Dry well with soft or microfibre cloth. If these specific products are not available, please use a dry cloth for daily cleaning and a generic window cleaning agent, insisting in case of possible stains.
Clean with dry cloth and multipurpose cream (Boffi Clean Set) or the Casa 9, Multipurpose cleaner by Nuncas. For in-depth cleaning add a neutral detergent to water, as Winto Parquet by Nuncas. Dry well with soft or microfibre cloth. If these specific products are not available, please use a dry cloth for daily cleaning and a generic window cleaning agent, insisting in case of possible stains.
Clean with dry cloth and multipurpose cream (Boffi Clean Set) or the Casa 9, Multipurpose cleaner by Nuncas.For in-depth cleaning add a neutral detergent to water, as Winto Parquet by Nuncas. Dry well with soft cloth. If these specific products are not available, please use a moist cloth for daily clean-ing and a neutral detergent for in-depth cleaning.
Clean with moist cloth. For in-depth cleaning use vegetable soap. Dry well with soft cloth.
Clean with dry cloth and multipurpose cream (Boffi Clean Set) or the Casa 9, Multipurpose cleaner by Nuncas.For in-depth cleaning add a neutral detergent to water, as Winto Parquet by Nuncas. Dry well with soft cloth. If these specific products are not available, please use a moist cloth for daily clean-ing and a neutral detergent for in-depth cleaning.
Harmful cleaning agents
Abrasive detergents and creams.Dust spray and furniture wax as these could stain and leave haloes on surface.
Abrasive detergents and creams.Dust spray and furniture wax as these could stain and leave haloes on surface.
Products containing acetone, chlorine o diluents, powders or abrasive products.Strong alkaline detergents.
Products containing acetone, chlorine o diluents, powders or abrasive products.Strong alkaline detergents.
Products containing acetone, chlorine o diluents, powders or abrasive products.Strong alkaline detergents.
Precautions and advice
If the polyester should dull it is possible to buff the surface with car polish applied using a soft, non-abrasive cloth.
Use extreme caution not to scratch the surface. Do not use abrasive products.
Paints used for wooden surfaces are hydro repellent and anti-yellowing. Avoid scratching and exposure to high temperatures. Remember that wood is a natural productand as such is sensitive to heat and humidity.Do not apply furniture waxes.
Remove immediately any stains for avoid-ing their permeation. It’s recommended to use periodically the specific clean-ing / maintenance kit (cod. AVBL023 / AVBL024).
Remove immediately any stains for avoid-ing their permeation.
SURFACES IN POLYESTER
SURFACES LACQUERED IN METALS
SURFACES IN WOOD AND WOOD SELECTION (VENEER)
SURFACES IN SOLID WOOD (TOPS EXCLUDED)
WORKTOPS IN SOLID WOOD
M a i n t e n a n c e - U s e
SPECIFIC PRODUCTS - HINTS
60 01/2016
L = WidthP = DepthH = HeightPr = Price code
M a i n t e n a n c e - U s e
Recommended cleaning agents
For removing dust and fingerprints clean with dry cloth and multipurpose cream (Boffi Clean Set) or the Stainless Steel Polish Cleaner by Nuncas. For in-depth cleaning use Wannet Blu by Nuncas.If this specific product Is not available, please use a moist cloth and dry with soft or microfibre cloth or use a multipurpose cleaner and rinse well. For persistent stains use warm vinegar. Always clean in a motion parallel to the polish markings.
Clean da i ly w i th a sponge and water+detergent C1.07 DAY (cod. AVBL027) or Winto Marmo by Nuncas. For persistent stains use only the deter-gent (without water). In case of polished finish it’s possible to use Bel Marmo by Nuncas, to protect and maintain the surface brightness.On the surfaces use periodically the kit of oleo-proofing and waterproof treat-ment (cod. AVBL028), following the instructions.
For removing dust and fingerprints clean with dry cloth and multipurpose cream (Boffi Clean Set) or the Casa 9, Multi-purpose cleaner by Nuncas. To remove grease use Casa 9 Strong Degreaser Premium by Nuncas with a moist sponge and rinse well.For removing limestone and soap depos-its please use Wannet Blu by Nuncas. If these specific products are not available, please use a moist cloth for daily cleaning and a neutral detergent or descaler for in-depth cleaning.
For removing dust and fingerprints clean with dry cloth and multipurpose cream (Boffi Clean Set) or the Casa 9, Multi-purpose cleaner by Nuncas. To remove grease use Casa 9 Strong Degreaser Premium by Nuncas with a moist sponge and rinse well.For removing limestone and soap depos-its please use Wannet Blu by Nuncas. If these specific products are not available, please use a moist cloth for daily cleaning and a neutral detergent or descaler for in-depth cleaning.
For removing dust and fingerprints clean the aluminium and glass parts with dry cloth and Glasnet by Nuncas. If this specific product Is not available, please use a common window cleaning agent, rinsing and drying very well.
Harmful cleaning agents
Scrubs, abrasive sponges.Products containing ammonia or hydro-chloric acid as these could stain the surface.
Metal scrubs, sponges or abrasive products or bleach. In general avoid all acidic cleaners.
Acid or strong alkaline products. Deter-gents containing bleach.
Acid or strong alkaline products. Deter-gents containing bleach.
Scrubs, abrasive detergents and creams.Detergents containing acids.
Precautions and advice
Handle with care and do not use sharp objects to remove the protective poly-thene film.Please remove shortly stains of food weak acids (lemon, tomatoes etc. ).Please use Steel Protective Cream by Nuncas to remove limestone, ferrous stains and small scratches.
In case of fingerprints on matt polished surface please clean with lukewarm water and dry well. Do not use oil-based products or liquid wax or cleaners for other surface typologies.Pls. note: Marble and stone are porous materials, therefore stains penetrate quickly and must be removed immedi-ately; they are particularly sensitive to oil, lemon, vinegar, tea and coffee.
Please gently remove stains of materials that harden while drying (i.e. rubber, grease, nail varnish, paints, etc.), with a plastic scraper, after using some luke-warm water.
Please gently remove stains of materials that harden while drying (i.e. rubber, grease, nail varnish, paints, etc.), with a plastic scraper, after using some luke-warm water.
Use cotton rags or synthetic cloth in-tended for cleaning glass in order to avoid leaving fluff on the frosted and pressed glass surfaces.
SURFACES IN STAINLESS STEEL
SURFACES IN MARBLE, GRANITE OR STONE(sandblasted finish matter)
SURFACES IN SILESTONE®
SURFACES IN DEKTON®
SURFACES IN GLASS AND ALUMINIUM
SPECIFIC PRODUCTS - HINTS
6101/2016
L = WidthP = DepthH = HeightPr = Price code
M a i n t e n a n c e - U s e
Recommended cleaning agents
For in-depth cleaning use the Durinox® Liquid cleaner included in the cleaning kit for Durinox® (cod. AVBL026).For daily cleaning please use soft sponge or microfibre cloth with common-use detergent. For limestone stains please use vinegar or citrus-based cleaner.
Clean with dry cloth and a cleaning window agent as Glasnet by Nuncas. For in-depth cleaning use Brax Cleaner Cream by Nuncas, rinse and dry well. For limestone stains please use Wannet Blu by Nuncas. If these specific products are not available, please use a moist cloth and dry well. For persistent stains consult the maintenance advice supplied with the product.
Clean with moist cloth and warm water and multipurpose cream (Boffi Clean Set) or the Casa 9, Multipurpose cleaner by Nuncas. If this specific product is not available please use delicate detergent and not abrasive or bleach diluted with water (1 part bleach, 10 parts water).
Clean with moist cloth and warm water and multipurpose cream (Boffi Clean Set) or the Casa 9, Multipurpose cleaner by Nuncas. If these specific products are not available, please use water and a neutral detergent.
For removing dust and fingerprints clean with dry cloth and the Stainless Steel Polish Cleaner by Nuncas. If this specific product Is not available, please usea moist cloth and dry with soft cloth or chamois leather, or use a multipurpose cleaner and rinse well. For persistent stains use warm vinegar.Always clean in a motion parallel to the polish markings.To remove limestone and dirt from aera-tor filters, please remove the aerator and keep it soaking in white vinegar for some hours.Then please wash with water and soap and finally rinse well
Harmful cleaning agents
Scrubs and abrasive sponges.Detergents containing bleach or hydro-chloric acid.
Strong alkaline detergents such as con-centrated degreasers.Scrubs and abrasive sponges.
Abrasive detergents or containing bleach.
Scrubs, detergents and abrasive creams. In general avoid all acidic detergents.
Scrubs, abrasive sponges.Products containing ammonia or hydro-chloric acid as these could stain the surface.
Precautions and advice
Use extreme caution not to scratch the surface; do not use sharp objects to re-move the protective polythene film.Please remove shortly stains of food weak acids (lemon, tomatoes etc.).
In case of coloured stains such as wine, coffee or vegetables like aubergines and carrots, please clean the surface with bleach diluted with water (1 part bleach to 2 parts water) - leaving it for some seconds - then rinse well.
Use extreme caution not to scratch the surface. Do not use abrasive products. Do not place hot objects on the surfaces.
Use cotton rags or synthetic cloth to avoid leaving fluff on surfaces. For removing limestone and soap deposits please use Wannet Blu by Nuncas.
Use extreme caution not to scratch the surface; do not use sharp objects to re-move the protective polythene film.Please remove shortly stains of food weak acids (lemon, tomatoes etc.).Please use Steel Protective Cream by Nuncas to remove limestone, ferrous stains and small scratches.
SURFACES IN DURINOX®
SURFACES IN CORIAN®
SURFACES IN PAPERSTONE®
TAPS, ACCESSORIES AND PARTS IN CHROMIUM-PLATED FINISH
TAPS, ACCESSORIES AND FIN-ISHED PARTS IN STAINLESS STEEL
SPECIFIC PRODUCTS - HINTS
62 01/2016
L = WidthP = DepthH = HeightPr = Price code
M a i n t e n a n c e - U s e
Recommended cleaning agents
Clean with hot water and Nuncas Casa 9 Forte. Rinse and wipe well.
For removing dust and fingerprints clean with dry cloth and the Stainless Steel Polish Cleaner by Nuncas. If this specific product Is not available, please use a moist cloth and dry with soft cloth or chamois leather, or use a multipurpose cleaner and rinse well. Always clean in a motion parallel to the polish markings.
Clean with wrung out damp sponge and leave to dry, being careful to maintain the chopping-board in a vertical position. Colourful aliments (carrots, raw meat, some vegetables, etc.) may stain the chopping board surface, altering the natural shade of the wood.
Harmful cleaning agents
Any kind of cleanser and washing in dishwasher.
Scrubs, abrasive detergents and creams.Detergents containing acids.
Any kind of cleanser and washing in dishwasher.Scrubs, sponges or abrasive creams.
Precautions and advice
Possible incrustations may be removed wrapping the grid in a humid felt cloth; let it be for 15 min to soften the dirt; then you can proceed with cleaning process. In case of hard incrustations do not use sharp objects because they might dam-age the enamel surface and facilitate the rusty process: in these cases please use a Scotch Brite sponge. You can protect your grids lubricating them with a thin oil layer.
Avoid scratching as all handles are treated with anti-oxidation paints.
Do not leave it under water and avoid wet-ting it too much during cleaning. Do not expose it to direct sunlight and keep it away from any source of heat.Do not wash in dishwasher.Use the chopping board on both sides.To bring back the original features of the chopping board is recommended a simple sanding process of the two surfaces with fine sandpaper (grit: 160). Then treat the surfaces with vegetable oil (2 times in 48 hours).
ENAMELED CAST IRON GRIDS
HANDLES IN ALUMINIUM AND PAINTED ZAMA
CHOPPING-BOARDS IN SOLID WOOD
SPECIFIC PRODUCTS - HINTS
6301/2016
L = WidthP = DepthH = HeightPr = Price code
Modular units with COMPULSORY HANDLE, to be chosen among the handles with or without price increase.
Carcass
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low formaldehyde emission (class E1/CARB P2), treated with high performance melamine resin. Front and back edges in ABS, same colour.
SIDE PANEL HEIGHT: 660 - 720 - 790 mm.SIDE PANEL DEPTH: 320 - 600 mm.DEPTH INCLUDING FRONT PANEL: 345 - 625 mm.MODULE WIDTH: 150 - 300 - 450 - 600 - 900 - 1200 mm.
FINISH: melamine.
COLOURS: open-pore grey-graphite oak - Silk white.
Drawers
LEGRABOX system with sides and rear panel in metal, painted with epoxy dusts. Bottom in black melamine and front panel (of internal drawers) in melamine, same finish as carcass. Bottom is provided with non-toxic anti-slip mat.
FINISH: metal + melamine.
COLOURS: matt black.
Doors and front panels
Thickness: 23 mm, compulsory handle.All pull-out front panels of base units (drawers, heavy-duty drawers and single doors) can be fitted with the SERVO-DRIVE electrical opening device (CUSTOMISED SOLU-TIONS - PRICE INCREASES - MAINTENANCE chapter).
FINISHES: Decomat - AH laminate - Lasermat - Silcover - Ecolak - Wood - Wood Selection - Polyester - Metals - Corian® - Stainless steel - Wood 3D - LT Wood - Solid wood - Solid wood 3D.
COLOURS: all range colours/species.
Handle
Each front panel should have an handle, to be chosen from the range, with or without a price increase. Compatibility between handle type and finish are indicated on the general technical information part (Handles section).
ATTENTION !!! – Base unit doors with NO HANDLE can be supplied, upon request and free of charge, with the push opening system TIP-ON. SINGLE PULL-OUTDOORS require the SERVO-DRIVE system, to be ordered separately.
Worktops
Please use standard worktops, see WORKTOPS chapter.
THICKNESS: 12 - 20 - 40 - 60 - 110 - 190 mm.DEPTH: 350 - 630 - 650 - 705 - 830 - 900 - 980 - 1030 - 1260 mm.
FINISHES: Laminate - Lasermat - Glass - Wood (veneer) - Solid wood - Solid wood staves - Stainless Steel - Durinox® - Corian® - Marble - Stone - Granite - Composite.
COLOURS: all range colours/species - GLASS: feasible only frosted Extralight white / dove grey / coffee.
P r o g r a m m a S T A N D A R DBASE UNITS
Plinth
To be ordered separately (Plinth chapter).Made of extruded aluminium profile, in stainless steel or painted finishes, with a patented mechanism for height and depth regulation.
HEIGHT: 80 - 120 - 150 - 210 mm.
COLOURS: Stainless steel - Matt white painted - Matt black painted -Bright white painted (Lamicolor® 754).
TECHNICAL FEATURES
64 01/2016
L = WidthP = DepthH = HeightPr = Price code
P r o g r a m m a S T A N D A R D BASE UNITS
TECHNICAL DETAILS
656
22
540
40
140
110
45056
110
20 52420
140
625600
514
540573
620
2020
660
870 65
621
0
210
210
210
22
660
625600
540573
620
2020
660
870
210
656
520
500
500
372
140
140
22
22
372
282
22
2
625600
514
540573
540
100
20
660
870
656
210
210
210
210
22
660
625600
540573
540
100
20
660
870
210
656
520
500
500
372
140
140
22
22
372
282
22
2
625600
540
20
660
870 65
621
0
210
210
210
22
660
625600
640
20
660
870
210
656
372
282
22
2
2370 2
11241078
2370 2
11241078
2370 2
11241078
2370 2
11241078
2370 2
11241078
2370 2
11241078
BASE UNITS - STORAGE USE
BASE UNITS - UNDER-HOB USE
BASE UNITS - UNDER-SINK USE
6501/2016
L = WidthP = DepthH = HeightPr = Price code
P r o g r a m m a S T A N D A R D BASE UNITS
TECHNICAL DETAILS
716
22
540
40
140
110
45056
110
20 52420
140
625600
514
540573
680
2020
720
840-
870
716
120-1
50
120-1
50
120-1
50
120-1
50
22
720
625600
540573
680
2020
720
840-
870
120-1
50
716
520
500
500
432
140
140
22
22
432
282
22
2
625600
514
540573
600
100
20
720
840-
870
716
120-1
50
120-1
50
120-1
50
120-1
50
22
720
625600
540573
680
100
20
720
840-
870
120-1
50
716
520
500
500
432
140
140
22
22
432
282
22
2625600
700
20
720
840-
870
716
120-1
50
120-1
50
120-1
50
120-1
50
22
720
625600
700
20
720
840-
870
120-1
50
716
432
282
22
2
2370 2
11241078
2370 2
11241078
2370 2
11241078
2370 2
11241078
2370 2
11241078
2370 2
11241078
BASE UNITS - STORAGE USE
BASE UNITS - UNDER-HOB USE
BASE UNITS - UNDER-SINK USE
66 01/2016
L = WidthP = DepthH = HeightPr = Price code
P r o g r a m m a S T A N D A R D BASE UNITS
TECHNICAL DETAILS
625 625600
514
540573
670
100
20
790
80
870 67
010
020
790
80
87078
680
22
790
786
2370 2
11241078
2370 2
11241078
2370 2
11241078
2370 2
11241078
2370 2
11241078
2370 2
1124107820
790
80
870
600520
500
540573
500
502
140
140
80
22
22
502
282
80
22
2
625625
600
786
802
2
790
786
600
502
282
80
22
2
786
80
22
540
40
140
110
770
20
790
80
870
45056
110
20 52420 770
140
625 625600
514
540573
750
2020
790
80
870 75
020
20
790
80
87078
680
22
790
786
600520
500
540573
500
502
140
140
80
22
22
502
282
80
22
2
BASE UNITS - STORAGE USE
BASE UNITS - UNDER-HOB USE
BASE UNITS - UNDER-SINK USE
6701/2016
L = WidthP = DepthH = HeightPr = Price code
Modular wall units, available with HINGED DOOR (A), FLAP DOOR (B) OR COPLA-NAR SLIDING DOOR.The doors are opened through the specific lower aluminium band (recessed in the bottom part of the cabinet and hidden behind the door).The top-mounted units (C) , available as open-faced or open-faced with sliding door cabinets, complete the system.
Carcass
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low formaldehyde emission (class E1/CARB P2), treated with high performance melamine resin. Front and back edges in ABS, same colour. Lower door rear band in aluminium, painted with epoxy dusts: black on grey-graphite oak carcass / white on white carcass.
SIDE PANEL OF HINGED WALL UNIT: H. 440 - 600 - 720 - 880 - 1160 mm.SIDE PANEL OF FLAP WALL UNIT: H. 600 mm.SIDE PANEL DEPTH: 320 mm.DEPTH INCLUDING FRONT PANEL: 345 mm.MODULE WITH HINGED DOOR: W. 150 - 300 - 400 - 450 - 500 - 600 - 750 - 900 mm.MODULE WITH FLAP DOOR: W. 600 - 900 - 1200 - 1800 - 2400 mm.
FINISH: melamine.
COLOURS: open-pore grey-graphite oak - Silk white.
Mechanism (flap door)
AVENTOS device, available in version with or without motor. Cover plate in black plastic.
FINISH: metal + plastic.
COLOURS: matt black.
Doors and front panels
Thickness: 23 mm, compulsory handle.
FINISHES: Decomat - AH laminate - Lasermat - Silcover - Glass - Ecolak - Wood - Wood Selection - Polyester - Metals - Corian® - Stainless steel - Wood 3D - LT Wood - Aluminium - Solid wood - Solid wood 3D - WK6 frame with glass - Factory frame with glass.
COLOURS: all range colours/species - GLASS: feasible only frosted Extralight white / dove grey / coffee (WK6 or FACTORY FRAME with glass - all range glasses are feasible).
Grip
The doors are opened through the specific lower aluminium band (recessed in the bottom part of the cabinet and hidden behind the door).It’s possible, upon request, to have the handle on wall unit.
FINISH: painted aluminium.
COLOURS: matt black - matt white.
P r o g r a m m a S T A N D A R DWALL UNITS
TECHNICAL FEATURES
A
B
C
68 01/2016
L = WidthP = DepthH = HeightPr = Price code
P r o g r a m m a S T A N D A R D WALL UNITS
TECHNICAL DETAILS
345320
290
560
2020
600
596
22
716
22
876
22
1156
22
345320
290
560
2020
600
596
22
345320
163
163
20
22
290
400
20
440
436
345320
20
22
290
400
20
440
436
345320
290
680
2020
720
345320
290
840
2020
880
345320
290
300
1120
2020
1160
163
163
163
600
596
22
716
22
876
22
1156
22
720
880
345320
1160
32012
80 /
1320
345320
1280
/ 13
20
345320
345320
345320
163
163
75°(A)100°(B)
WALL UNITS - WITH HINGED DOOR
WALL UNITS - WITH FLAP DOOR
WALL UNITS - TOP-MOUNTED UNITS
WALL UNITS - WITH COPLANAR SLIDING DOOR
Door opening chosen by client: an opening hinge limiter is supplied to have 75° (A) and 100° (B) angles.
6901/2016
L = WidthP = DepthH = HeightPr = Price code
Modular tall units with COMPULSORY HANDLE, to be chosen among the handles with or without price increase.
Carcass
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low formaldehyde emission (class E1/CARB P2), treated with high performance melamine resin. Front and back edges in ABS, same colour.
SIDE PANEL HEIGHT: 1900 - 2000 - 2060 - 2130 - 2340 mm.SIDE PANEL DEPTH: 320 - 600 mm.DEPTH INCLUDING FRONT PANEL: 345 - 625 mm.MODULE WIDTH: 300 - 450 - 600 - 764 - 900 - 916 - 1200 mm.
FINISH: melamine.
COLOURS: open-pore grey-graphite oak - Silk white.
Drawers
LEGRABOX system with sides and rear panel in metal, painted with epoxy dusts. Bottom in black melamine and front panel (of internal drawers) in melamine, same finish as carcass. Bottom is provided with non-toxic anti-slip mat.
FINISH: metal + melamine.
COLOURS: matt black.
Doors and front panels
Thickness: 23 mm, compulsory handle.
FINISHES: Decomat - AH laminate - Lasermat - Silcover - Ecolak - Wood - Wood Selection - Polyester - Metals - Corian® - Stainless steel - Wood 3D - LT Wood - Solid wood - Solid wood 3D.
COLOURS: all range colours/species.
Handle
Each front panel should have an handle, to be chosen from the range, with or without a price increase. Compatibility between handle type and finish are indicated on the general technical information part (Handles section).
Plinth
To be ordered separately (Plinth chapter).Made of extruded aluminium profile, in stainless steel or painted finishes, with a patented mechanism for height and depth regulation.
HEIGHT: 80 - 120 - 150 - 210 mm.
COLOURS: Stainless steel - Matt white painted - Matt black painted -Bright white painted (Lamicolor® 754).
P r o g r a m m a S T A N D A R DTALL UNITS
TECHNICAL FEATURES
70 01/2016
L = WidthP = DepthH = HeightPr = Price code
P r o g r a m m a S T A N D A R D TALL UNITS
TECHNICAL DETAILS
514
540573
802
625600
514
540573
2000
1996
210
22
2370 2
11241078
514
540573
120-1
502
1896
2
625600
1900
2370 2
11241078
514
540573
120-1
502
2056
2
2126
2
625600
2060
2370 2
11241078
2370 2
11241078
625600
2130
514
540573
802
2336
2
2370 2
11241078
625600
2340
802
345320
2000
1996
210
22
2370 2
112
120-1
502
1896
2
345320
1900
2370 2
112
120-1
502
2056
2
2126
2
345320
2060
2370 2
112
2370 2
112
345320
2130
802
2336
2
2370 2
112
345320
2340
290
163
TALL UNITS - STORAGE
7101/2016
L = WidthP = DepthH = HeightPr = Price code
P r o g r a m m a S T A N D A R D TALL UNITS
TECHNICAL DETAILS
514
540573
786
802
22
790
625600
514
540573
2000
656
1336
210
22
22
660
2370 2
11241078
514
540573
716
120-1
502
2
720
1176
22
2
625600
1900
2370 2
11241078
514
540573
716
120-1
502
2
720
1336
22
2
1336
2
625600
2060
2370 2
11241078
2370 2
11241078
625600
2130
514
540573
786
802
22
790
1546
2
2370 2
11241078
625600
2340
786
802
22
790
345320
2000
656
1336
210
22
22
660
2370 2
112
716
120-1
502
2
720
1176
22
2
345320
1900
2370 2
112
716
120-1
502
2
720
1336
22
2
1336
2
345320
2060
2370 2
112
716
120-1
502
2
720
1616
22
2
716
120-1
502
2
720
1616
22
2
2370 2
112
345320
2130
786
802
22
790
1546
2
2370 2
112
345320
2340
290 290 290
290 290
163
TALL UNITS - STORAGE
72 01/2016
L = WidthP = DepthH = HeightPr = Price code
P r o g r a m m a S T A N D A R D TALL UNITS
TECHNICAL DETAILS
514
540573
786
802
2
790
625600
514
540573
2000
656
210
22
660
2370 2
11241078
514
540573
716
120-1
502
720
2
625600
1900
2370 2
11241078
514
540573
716
120-1
502
720
2
625600
2060
2370 2
11241078
514
540573
716
120-1
502
720
2
625600
2340
2370 2
11241078
2370 2
11241078
625600
2130
514
540573
786
802
2
790
2370 2
11241078
625600
2340
432
282
22
2
432
282
22
2
432
282
22
2
372
282
22
2
502
282
22
2
502
282
22
2
625600
436
2
440
2
625600
2210
1336
22
1176
22
625600
2050
625600
870
870
1546
22
870
2420
625600
1616
22
840/
870
2460
/249
514
540573
1526
802
625600
514
540573
1400
1396
210
22
2370 2
11241078
514
540573
120-1
502
1456
2 2
625600
1460
2370 2
11241078
2370 2
11241078
625600
1530
TALL UNITS - FOR OVEN
ABOVE TALL UNIT CABINETS COMPLEMENTARY TALL UNITS - STORAGE
MADIA TALL UNITS - STORAGE
7301/2016
L = WidthP = DepthH = HeightPr = Price code
Modular kitchen composed by Boffi standard units with specific worktops, char-acterised by a reduced visible thickness. The handle is compulsory, except for aluminium finish. _ Doors and front panels with compulsory handle extend, on the upper side 48 mm beyond the carcass height. Because of that, in combination with 60/55 mm. thick Aprile worktops, only 10/5 mm. are visible on the front. In the alu-minium finish the door has a reduced height (as handle-rail, without handle). _ The end units can be completed with 23 mm. thick side panels in the desired finish, with 5 mm. thick end panels (in this case please use end base units) or with finished side panels (in this case the 60/55 mm. thick worktop section is completely visible). _ In case of wall compositions it’s possible to have specific Top-mounted units placed on worktop: these open-faced units, available in different finishes, when combined with Aprile wall units can be equipped with sliding doors and/or LED-under wall unit lamps. _ Aprile wall units are characterized by a door extending 23 mm. beyond the lower edge: because of this extra extension, the thickness of the finished panel under-wall unit is covered and may be provided with LED under-mounted lamps and glides for sliding doors (to be used for the optional open-faced Top-mounted units, mounted under the wall unit)._ This chapter includes base units, tall units and wall units specific for Aprile. Aprile base units with 60 mm thick top can be, ac-cording to the designer’s choice, integrated with standard base units 660 mm. high (see chapter Programma STANDARD Base units) and provided with 190 mm. Aprile worktops. All the standard base units with side panel 660 mm. high, used in this kind of configuration, are provided with an 80 mm. plinth (and not a 210 mm one).
Carcass
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low formaldehyde emission (class E1/CARB P2), treated with high performance melamine resin. Front and back edges in ABS, same colour.
BASE UNIT SIDE PANEL HEIGHT: 790 mm.TALL UNIT SIDE PANEL HEIGHT: 2130 - 2340 mm.SIDE PANEL DEPTH: 320 - 600 mm.DEPTH INCLUDING FRONT PANEL: 345 - 625 mm.MODULE WIDTH: 150 - 300 - 450 - 600 - 900 - 1200 mm.
FINISH: melamine.
COLOURS: open-pore grey-graphite oak - Silk white.
Drawers
LEGRABOX system with sides and rear panel in metal, painted with epoxy dusts. Bottom in black melamine and front panel (of internal drawers) in melamine, same finish as carcass. Bottom is provided with non-toxic anti-slip mat.
FINISHES: metal + melamine.
COLOURS: matt black.
Doors and front panels
Thickness: 23 mm, compulsory handle in all finishes except for aluminium (in this case the door has a reduced height as handle-rail).All pull-out front panels of base units (drawers, heavy-duty drawers and single doors) can be fitted with the SERVO-DRIVE electrical opening device (CUSTOMISED SOLU-TIONS - PRICE INCREASES - MAINTENANCE chapter).
FINISHES: Decomat - AH laminate - Lasermat - Silcover - Ecolak - Wood - Wood Selection - Polyester - Metals - Corian® - Stainless steel - Wood 3D - LT Wood - Alu-minium - Solid wood - Solid wood 3D.
COLOURS: all range colours/species.
A P R I L ETECHNICAL FEATURES
Handle
Each front panel, except for the one in aluminium, must have an handle (see the complete range), with or without price increase.
SOLID WOOD finish, compatible with EXTERNAL handles only.
ATTENTION !!! – Base unit doors with NO HANDLE can be supplied, upon request and free of charge, with the push opening system TIP-ON. SINGLE PULL-OUT-DOORS require the SERVO-DRIVE system, to be ordered separately.
Worktops
Cut-out worktop, th. 60/55 mm (visible thickness: 10 /5 mm). The cut-out on front parts of the worktop houses the protruding part of base unit front panels. This same cut-out can be realised, with proper processing, on worktop sides, in correspondence to the end panels, so that the visible thickness 10 /5 mm is obtained on all sides. Height-reduced (-40 mm) insets can be used, adding the relative customisation per linear metre (not feasible on worktops in C.R.S. Scotch Brite stainless steel).
THICKNESS: 60 - 55 mm (visible: 10 - 5 mm).DEPTH: 350 - 630 - 705 - 830 - 980 - 1260 mm.
FINISHES, th. 60 mm (visible thickness: 10 mm): matt satin stainless steel - Corian® - stone - marble - granite (complete range except for Bihara stone).
FINISHES, th. 55 mm (visible thickness: 5 mm): matt satin stainless steel - C.R.S. Scotch Brite stainless steel .Made of extruded aluminium profile, in stainless steel or painted finishes, with a patented mechanism for height and depth regulation.
FINISHES, th. 56 mm (visible thickness: 6 mm): Durinox®.
Plinth
To be ordered separately (Plinth chapter).Made of extruded aluminium profile, in stainless steel or painted finishes, with a patented mechanism for height and depth regulation.
HEIGHT: 80 mm.
COLOURS: Stainless steel - Matt white painted - Matt black painted -Bright white painted (Lamicolor® 754).
74 01/2016
L = WidthP = DepthH = HeightPr = Price code
A P R I L ETECHNICAL DETAILS
Base units with compulsory handle (A): all finishes except for aluminium finish.Base units without handle (B): Aluminium finish only (base units with single door only).
A B
625 625600
514
540573
11241078
750
2020
790
80
870 75
020
20
790
80
870
23702
100
23702
10011241078
600520
500
540573
670
100
20
790
80
870
500
836
80
2
502
140
190
80
22
2
838
804
804
804
838
838
625 625600
514
540573
11241078
23702
100
836
80
283
8
670
100
20
790
80
870
4860 / 5
5 2
10 /
5
232 5
36
60 / 5
5 10 /
5
232 5
502
332
80
22
23702
10011241078
600
20
790
80
870
502
332
80
22
23702
10011241078
600520
500
540573
500
502
140
190
80
22
2
502
332
80
22
838
625600
54040
11241078
23702
100
836
80
2
170
110
838
770
20
790
80
870
625
45040
110
2020 770
170
7501/2016
L = WidthP = DepthH = HeightPr = Price code
A P R I L ETECHNICAL DETAILS
Wall units.
345
840
880
2020
320 232
16 301
290
3
901
2
903
345
680
720
2020
320 232
16 301
290
3
741
2
743
345
560
600
2020
320 232
16 301
290
3
621
2
623
23
23
23
345
1120
1160
2020
320 232
16 301
290
3
1181
2
1183
23345
400
440
2020
320 232
16 301
290
346
12
463
23
345320
290
560
2020
600
163
75°(A)100°(B)46
12
463
WALL UNITS - WITH HINGED DOOR
WALL UNITS - WITH FLAP DOOR
Door opening chosen by client: an opening hinge limiter is supplied to have 75° (A) and 100° (B) angles.
76 01/2016
L = WidthP = DepthH = HeightPr = Price code
A P R I L ENOTES TO DESIGNER
Base units.
80 80
790
660
190
930
930
60
A B
Tipo / type: SH - SP - SM
Tipo / type: SV
4860 / 5
5 2
10 /
5
232 5
36
60 / 5
5 10 /
5
232 5
10
10
5
5
10 / 5
23
8079
093
060
60 /
55 10 /
5
23
235 18 80
790
925
55
55 5
2310 13
8079
093
060
6010
1
2
3
*
BASE UNITS
Two different door types are possible according to the desired finish:
SQUARE-EDGED type SH - SP - SM:Thickness: 23 mm - FEASIBLE in all finishes (Aluminium excluded), COMPULSORY HANDLE.In the order please always specify the door type:SH = Aprile protruding square-edged doorSP = protruding door, Aprile Wood LTSM = Aprile protruding door 3D wood / 3D solid wood
REDUCED HEIGHT door type SV:Thickness: 23 mm - feasible in aluminium ONLY, WITHOUT HANDLE ( aluminium th. 3 mm + melamine coated support th. 20 mm )
The 790 mm high Aprile base units must be combined with 60 or 55 mm Aprile worktop (visible thickness: 10 or 5 mm)._ The Aprile base units (A) with 60 mm thick worktop can be, according to the designer, integrated with standard base units 660 mm high (B, see chapter 1 – base units) used with 190 mm. Aprile worktops. All standard base units with side panel 660 mm high have a 80 mm plinth and not a 210 mm plinth._ For finished side panels please use codes of standard base units (see chapter Programma Standard Base units).
BASE UNITS: SIDE PANELS
1 - 23 mm thick panel + base unit + 60 / 55 mm thick worktop.
Panel in SAME FINISH AS DOOR, th. 23 mm (please use the panel per square metre - Panels chapter), close to Aprile base unit with 60 mm thick worktop (visible thickness: 10 mm) or 55 mm thick (visible thickness: 5 mm). Please add, on worktop sides that should be matched with panel, the cut-out on top edges (customisation) per linear metre cod. ZTIBP01 / ZTIBP02 / ZTRBP01 / ZTMBP01.
2 - Panel with visible thickness 5 mm + END base unit + 55 mm thick worktop.
Panel in STAINLESS STEEL, SAME FINISH AS TOP, visible thickness: 5 mm (MATT SATIN STAINLESS STEEL / C.R.S. SCOTCH BRITE STAINLESS STEEL), close to END (*) Aprile base unit with 55 mm thick worktop (visible thickness: 5 mm). The panel is composed of a finished visible part (5 mm thick) and of an internal support in melamine (with frontal edge coated in stainless steel), covered by the lateral protruding part (+19 mm) of the end base unit front panel. Please add, on worktop sides that should be matched with panel, the cut-out on top edges (customisation) per linear metre cod. ZTIBP01 / ZTIBP02 / ZTRBP01 / ZTMBP01.
3 - 23 mm thick panel (visible thickness 10 mm + 13 mm rabbet) + base unit + 60 mm thick worktop
Panel in SAME FINISH AS DOOR (STAINLESS STEEL / CORIAN® only), 23 mm thick (vis-ible thickness 10 mm + 13 mm rabbet), close to Aprile base unit with 60 mm thick worktop (visible thickness: 10 mm). Please add, on worktop sides that should be matched with panel, the cut-out on top edges (customisation) per linear metre cod. ZTIBP01 / ZTIBP02 / ZTRBP01 / ZTMBP01.
7701/2016
L = WidthP = DepthH = HeightPr = Price code
A P R I L ENOTES TO DESIGNER
Tall units / Wall units/ Top-mounted units.
A A A
B B
C D
B
A
B
C
D
C
E
CF F F
838
*
TALL UNITS
The 2130 mm. or 2340 mm. high Aprile tall units allow to have alignments (*) with doors of specific Aprile base units. They can be integrated with 2130 or 2340 mm high tall units with single door (corner solution too), bridge tall units for 2210 or 2420 high refrigerators, fillers and standard finished side panels (see chapter Programma STANDARD Tall units)._ NOT feasible in Aluminium finish.
In the order please always specify the door type (thickness: 23 mm):SH = Aprile protruding square-edged doorSP = protruding door, Aprile Wood LTSM = Aprile protruding door 3D wood / 3D solid wood
WALL UNITS
The 440 - 600 - 720 - 880 - 1160 mm high Aprile wall units (A) with lower protruding door (+23 mm) must be combined ONLY with under-wall unit panel (B) cod. SQAYAV01/02. Thanks to this combination panel/wall unit the visible lower part of wall units is in finish and, upon request, a LED lamp/bar can be added_ The Aprile wall units, together with Aprile top-mounted units (C) or back panels (D), can be proposed on all other Boffi base units + worktop compositions, after checking carefully all their depths.
In the order please always specify the door type (thickness: 23 mm):SH = Aprile protruding square-edged doorSP = protruding door, Aprile Wood LTSM = Aprile protruding door 3D wood / 3D solid woodSV = Aprile protruding door in aluminium ( aluminium th.3 mm + melamine-coated support th. 20 mm )
TOP-MOUNTED UNITS
The Aprile top-mounted units (C) have to be covered with a panel - on upper part - (D) cod. SQAYAT02. If these units are positioned under Aprile wall units (A), the D covering panel is replaced with an under-wall unit panel (B) cod. SQAYAV01/02, which finishes the wall unit lower part and, at the same time, covers the upper part of the top-mounted unit. The 2 panel typologies (B and D) can be equipped with rail for sliding doors and/or LED lamp/bar cod. GMCZ04. It’s possible to propose these Aprile units under standard wall units (E), without any under-wall unit panel and any sliding door and/or LED lamp/bar. These units can be proposed on all other Boffi base units + worktop compositions, after checking carefully all their depths. ATTENTION ! - Any sliding door (F) cannot be used in correspondence to hobs or sinks.
78 01/2016
L = WidthP = DepthH = HeightPr = Price code
Modular base and tall units WITHOUT HANDLE.The front panels are opened through the upper / middle handle-rails (for base units) or vertical spacers (for tall units).The base units named ”TIP-ON” are fitted with a push-opening mechanism and don’t require an intermediate handle-rail.Programma STANDARD or APRILE wall units to be used to complete the composi-tion.
Carcass
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low formaldehyde emission (class E1/CARB P2), treated with high performance melamine resin. Front and back edges in ABS, same colour.
BASE UNIT SIDE PANEL HEIGHT: 790 mm.TALL UNIT SIDE PANEL HEIGHT: 2130 - 2340 mm.SIDE PANEL DEPTH: 320 - 600 mm.DEPTH INCLUDING FRONT PANEL: 345 - 625 mm.MODULE WIDTH: 150 - 300 - 450 - 600 - 900 - 1200 mm.
FINISH: melamine.
COLOURS: open-pore grey-graphite oak - Silk white.
Drawers
LEGRABOX system with sides and rear panel in metal, painted with epoxy dusts. Bottom in black melamine and front panel (of internal drawers) in melamine, same finish as carcass. Bottom is provided with non-toxic anti-slip mat.
FINISH: metal + melamine.
COLOURS: matt black.
Doors and front panels
Thickness: 23 mm.All pull-out front panels of base units (drawers, heavy-duty drawers and single doors) can be fitted with the SERVO-DRIVE electrical opening device (CUSTOMISED SOLU-TIONS - PRICE INCREASES - MAINTENANCE chapter).
FINISHES: Decomat - AH laminate - Lasermat - Silcover - Glass - Ecolak - Wood - Wood Selection - Polyester - Metals - Corian® - Stainless steel - Wood 3D - Aluminium - Solid wood - Solid wood 3D.
COLOURS: all range colours/species - GLASS: feasible only frosted Extralight white / dove grey / coffee.
Handle-rails / Vertical spacers
Made of extruded aluminium profile, in stainless steel or painted finishes.Handle-rail (horizontal, for base units) versions: UPPER (to be used always) and MIDDLE (to be used according to design needs).Vertical spacers (for tall units): available in different versions i.e. WITHOUT OVERLAYS, with 1 OVERLAY, with 2 OVERLAYS.
COLOURS: Stainless steel - Matt white painted - Matt black painted -Bright white painted (Lamicolor® 754).
Worktops
Please use standard worktops, see WORKTOPS chapter.
THICKNESS: 12 - 20 - 40 - 60 mm.DEPTH: 350 - 630 - 650 - 705 - 830 - 900 - 980 - 1030 - 1260 mm.
FINISHES: Laminate - Lasermat - Glass - Wood (veneer) - Solid wood - Solid wood staves - Stainless Steel - Durinox® - Corian® - Marble - Stone - Granite - Composite.
COLOURS: all range colours/species - GLASS: feasible only frosted Extralight white
X I L A
/ dove grey / coffee.
Plinth
To be ordered separately (Plinth chapter).Made of extruded aluminium profile, in stainless steel or painted finishes, with a patented mechanism for height and depth regulation.
HEIGHT: 80 - 120 mm.
COLOURS: Stainless steel - Matt white painted - Matt black painted -Bright white painted (Lamicolor® 754).
Xila STONE
It’s possible to have, after checking the feasibility, base units and fillers with front panels in WHITE CARRARA marble, CARDOSO stone, SILVER quartzite, ABSOLUTE BLACK ZIMBABWE granite.
Please consider the following PEREMPTORY RESTRICTIONS:- ONLY base units with PULL-OUT DOOR/DRAWERS/FIXED FRONT PANELS are feasible.- Max. width of the 900 mm single unit (single pull-out door max 600 mm).- fillers/ front panels for oven base units, width / min. height 70 mm.- Diswasher door available only in case of single door, without lower front panel.- To hold the door in stone, please use ONLY dishwasher with a door support ca-pacity of at least 12 kg (on some models of GAGGENAU and MIELE the standard hinges can be changed, contacting the customer service of the relative brand).
TECHNICAL FEATURES
7901/2016
L = WidthP = DepthH = HeightPr = Price code
X I L A BASE UNITS.
TECHNICAL DETAILS
20
4832
625600
43 43
514
540573
670
100
20
790
80/1
20
870
/ 910
600520
500
540573
670
100
20
790
80/1
20
870
/ 910
500
756
80/1
20
322
756
440
80/1
2014
032
234
214
0
440
3428
2
2370 2
11241078
2370 2
11241078
625600
43 43
770
20
790
80/1
20
870
/ 910
600
670
100
20
790
80/1
20
870
/ 910
756
80/1
20
322
756
440
80/1
2032
342
282
756
2370 2
11241078
2370 2
11241078
625600
43 43
514
540573
700
7020
790
80/1
20
870
/ 910
600520
500
540573
700
7020
790
80/1
20
870
/ 910
500
756
80/1
20
322
756
440
80/1
2014
032
234
214
0
440
3428
2
756
472
228
2
756
472
228
2
756
472
228
2
20
4832
20
34 70
2370 2
11241078
2370 2
11241078
540
40
110
110
20
110
45056
110
20 524
600
790
80/1
20
870
/ 910
820
/ 860
50
BASE UNITS - STORAGE USE
BASE UNITS - UNDER-HOB USE
BASE UNITS - UNDER-SINK USE
Useful height for under-mounted electrical appliances installation.
Version with TIP-ON.
Version with TIP-ON.
Version with TIP-ON.
80 01/2016
L = WidthP = DepthH = HeightPr = Price code
X I L A TALL UNITS.
TECHNICAL DETAILS
514
540573
756
4
213
662
2370 2
11241078
625600
2130
514
540573
756
4
215
762
2370 2
11241078
625600
2340
756
80/1
20
4
213
662
2370 2
112
345320305
2130
756
4
215
762
2370 2
112
345320
2340
290 290
514
540573
221
262
2370 2
11241078
625600
2130
514
540573
223
362
2370 2
11241078
625600
2340
80/1
20 221
262
2370 2
112
80/1
20
345320
2130
223
362
2370 2
112
345320
2340
514
540573
756
80/1
20 2
2370 2
2130
514
540573
756
2
2370 2
2340
514
540573
1526
80/1
20 22
2370 2
11241078
625600
1530
625600
2210
/ 22
50
1336
22
625600
870
/ 910
1546
22
870
/ 910
2420
/ 24
60
436
2
440
2
80/1
20
80/1
20
305
585
585
80/1
20
80/1
20
80/1
20
80/1
20
472
282
22
2
472
282
22
2
625600585
625600585
625600585
TALL UNITS - STORAGE
TALL UNITS - FOR OVEN COMPLEMENTARY TALL UNITS - STORAGE
ABOVE TALL UNIT CABINETS
MADIA TALL UNITS - STORAGE
8101/2016
L = WidthP = DepthH = HeightPr = Price code
X I L A TALL UNITS - Vertical spacers
TECHNICAL DETAILS
3426
23 30 600 30 30 30 30 30 23600 800 600 600
653
16
30
19,2 3068,4
19,2
4616
30
3049,2
19,2
46
32 596 34 34 34 34 32596 796 596 59630
4616
30
30
Vertical spacer - 1 OVERLAY.
Vertical spacer - WITH-OUT OVERLAYS.
Vertical spacer - 2 OVERLAYS.
82 01/2016
L = WidthP = DepthH = HeightPr = Price code
Modular base, wall and tall units WITHOUT HANDLE.Boiserie shelves complete the system.Single doors and upper front panels are opened through the upper handle-rails, while the middle, the lower base unit front panels and tall unit front panels are opened with TIP-ON push-opening.The wall units are opened through the specific protruding part (+12 mm).
Carcass
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low formaldehyde emission (class E1/CARB P2), treated with high performance melamine resin. Front and back edges in ABS, same colour.
BASE UNIT SIDE PANEL HEIGHT: 720 mm.TALL UNIT SIDE PANEL HEIGHT: 2130 mm.SIDE PANEL DEPTH: 320 - 600 mm.DEPTH INCLUDING FRONT PANEL: 345 - 625 mm.MODULE WIDTH: 300 - 450 - 600 - 900 - 1200 mm.
FINISH: melamine.
COLOURS: open-pore grey-graphite oak - Silk white.
Drawers
LEGRABOX system with sides and rear panel in metal, painted with epoxy dusts. Bottom in black melamine and front panel (of internal drawers) in melamine, same finish as carcass. Bottom is provided with non-toxic anti-slip mat.
FINISH: metal + melamine.
COLOURS: matt black.
Doors and front panels
Thickness: 23 mm.All pull-out front panels of base units (drawers, heavy-duty drawers and single doors) can be fitted with the SERVO-DRIVE electrical opening device (CUSTOMISED SOLU-TIONS - PRICE INCREASES - MAINTENANCE chapter).
FINISHES: Decomat - AH laminate - Lasermat - Silcover - Wood .
COLOURS: all range colours/species - WOOD: feasible only Oak horizontal grain 040 and black Eco-wood horizontal grain 039.
Handle-rail
Made of extruded aluminium profile, in stainless steel or matt white painted finishes.
COLOURS: Stainless steel - Matt white painted.
Worktops
Please use standard worktops, see WORKTOPS chapter.Please order separately the support for worktop (to be installed between worktop and base units).
THICKNESS: 12 - 20 - 40 - 60 mm.DEPTH: 350 - 630 - 650 - 830 - 980 - 1260 mm.
FINISHES: Laminate - Lasermat - Glass - Wood (veneer) - Solid wood - Solid wood staves - Stainless Steel - Durinox® - Corian® - Marble - Stone - Granite - Composite.
COLOURS: all range colours/species - GLASS: feasible only frosted Extralight white / dove grey / coffee.
X I L A S T
Plinth
To be ordered separately.Made of extruded aluminium profile, in stainless steel or painted finishes, with a patented mechanism for height and depth regulation.
HEIGHT: 150 mm.
COLOURS: Stainless steel - Matt white painted.
TECHNICAL FEATURES
8301/2016
L = WidthP = DepthH = HeightPr = Price code
X I L A S T BASE UNITS
TECHNICAL DETAILS
732
2
540
40
140
110
45056
110
20 52420
140
625600
514
540573
680
2020
720
870 73
215
0
150
150
150
2
720
14
625600
540573
680
2020
720
870
150
732
520
500
500
432
140
156
22
2
432
298
22
150
150
732
432
140
156
22
2
432
298
22
625600
514
540573
600
100
20
720
870
150
625600
540573
680
100
20
720
870
150
520
500
500
625600
700
20
720
870
150
150
150
625600
700
20
720
870
150
732
432
298
22
2370 2
11241078
2370 2
11241078
2370 2
11241078
2370 2
11241078
2370 2
11241078
2370 2
11241078
732
150
2
720
14
732
150
2
720
14
BASE UNITS - STORAGE USE
BASE UNITS - UNDER-HOB USE
BASE UNITS - UNDER-SINK USE
84 01/2016
L = WidthP = DepthH = HeightPr = Price code
X I L A S T WALL UNITS / SHELVING SYSTEMS
TECHNICAL DETAILS
440
396
206
630
1414
320
200 10020
630
60
396
206
206
206
1070
1414
1414
320
30020
320
30020
320
200 10020
732
2
345320
163
20
2
290
400
20
440
452
345320
290
680
2020
720
163
720
720
150
12 2130
WALL UNITS - WITH HINGED DOOR
SHELVING SYSTEMS - P 320 mm.
8501/2016
L = WidthP = DepthH = HeightPr = Price code
X I L A S T TALL UNITS
TECHNICAL DETAILS
514
540573
221
262
625600
2130
150
221
262
345320
2130
514
540573
732
150
213
902
2370 2
1124107815
0
2370 2
11241078
625600
2130
732
150
4
213
902
2370 2
112
2370 2
112
345320
2130
290
514
540573
732
120-1
502
2
625600
2130
2370 2
11241078
432
298
22
2
625600
2280
1410
22
870
625600
2280
1410
22
870
*
TALL UNITS - STORAGE
COMPLEMENTARY TALL UNITS - STORAGE TALL UNITS - FOR OVEN
* = dishwasher door with compulsory handle ONLY when positioned under a complementary tall unit.
86 01/2016
L = WidthP = DepthH = HeightPr = Price code
Kitchen block with sliding worktop, disclosing the fixed working surface. The spe-cific base units do not require any handle as the doors are opened through the upper bevelled edge.
BLOCK DIMENSIONS:K4 > L 1596 (with sliding worktop open 2480 mm) - P 700 mm - H 960 mm.K3 > L 2000 (with sliding worktop open 2895 mm) - P 700 mm - H 960 mm.K2 > L 2341 (with sliding worktop open 3530 mm) - P 700 mm - H 960 mm.
Structure with sliding worktop
WOOD finish:structure in box section stainless steel, supported by melamine-coated panels and externally plated by black Eco-wood veneer. Working surface and sliding worktop in CRS Scotch Brite stainless steel.• Structure > black Eco-wood.• Worktop > CRS Scotch Brite stainless steel.• Sliding worktop> CRS Scotch Brite stainless steel.
STAINLESS STEEL finish:structure in box section CRS Scotch Brite stainless steel, supported by melamine-coated panels. Working surface and sliding worktop in CRS Scotch Brite stainless steel.• Structure > CRS Scotch Brite stainless steel.• Worktop > CRS Scotch Brite stainless steel.• Sliding worktop> CRS Scotch Brite stainless steel.
CORIAN® finish:structure made of honeycomb board wood, totally plated with panels in white Corian®. Worktop in CRS Scotch Brite stainless steel. Upper sliding worktop in white Corian®.• Structure > white Corian®.• Worktop > CRS Scotch Brite stainless steel.• Sliding worktop > white Corian®.
Carcass (base units)
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low formaldehyde emission (class E1/CARB P2), treated with high performance melamine resin. Front edge in stainless stee, back edge in ABS, same colour. Adjustable feet in zinc-coated metal (min 10 / max 20 mm).
SIDE PANEL HEIGHT: 840 mm.SIDE PANEL DEPTH: 640 mm.DEPTH INCLUDING FRONT PANEL: 662 mm.MODULE WIDTH: 192 - 408 - 460 - 480 - 533 - 596 mm.
FINISH: melamine.
COLOURS: open-pore grey-graphite oak.
Drawers
TANDEMBOX system, sides and rear panel in stainless steel. Melamine-coated bot-tom and finished front panel (both of drawers and internal drawers).
FINISH: stainless steel + melamine.
Doors and front panels
Thickness: 20 mm, with upper bevelled edge used for gripping the door.The doors in Wood finish are composed of black Eco-wood veneer and stainless steel perimeter edges.
FINISHES: Wood with stainless steel edge- Stainless Steel - Corian®.
COLOURS: WOOD black Eco-wood with stainless steel edge / CRS Scotch Brite STAINLESS STEEL / white CORIAN®.
Worktops
K 2 / K 3 / K 4
The concealed fixed worktop can be equipped ONLY with:• SINKS COMPATIBLE WITH K2-K3-K4.• ELECTRICAL COOKTOPS OR ELECTRICAL INDUCTION HOBS.
Sliding worktop, with 3 bevelled edges.
FINISHING OF THE FIXED WORKING SURFACE:CRS Scotch Brite stainless steel.FINISHING OF THE SLIDING WORKTOP: CRS Scotch Brite stainless steel (on structures in wood or stainless steel) - CORIAN® (on structure in Corian®).
Combination of finishes
Blocks are supplied by default in a single finish i.e. all Corian® or all stainless steel. Upon request the following options are available: stainless steel structure + base units in Corian® / Structure in Corian® + stainless steel base units.
Packaging and Shipping
The block is fully assembled and is crated in a wooden case on castor wheels. Blocks are fitted with devices allowing for disassembly if necessary. Upon request the blocks can be delivered disassembled.
TECHNICAL FEATURES
8701/2016
L = WidthP = DepthH = HeightPr = Price code
70015962480
680148058 58
40846059658 4 4 4 4 58
84096
0
738
738
833
80
40846059658 4 4 4 4 58
738
833
833
80
max. 40 mm.
K4 - Dimensions of the structure with sliding worktop.
K4 - Internal fitting, example 1
K4 - Internal fitting, example 2
K 2 / K 3 / K 4
K4 - TECHNICAL DETAILS
Volume: 1,6 m³Weight: 300 kg.(packaging/wood case included).
Volume: 1,6 m³Weight: 300 kg.(packaging/wood case included).
88 01/2016
L = WidthP = DepthH = HeightPr = Price code
70020002895
680188458 58
84096
0
max. 40 mm.
19259648059658 4 4 4 4 4 58
19248059659658 4 4 4 4 4 58
738
833
80
738
738
833
80K3 - Dimensions of the structure with sliding worktop.
K3 - Internal fitting, example 1
K3 - Internal fitting, example 2
K 2 / K 3 / K 4
K3 - TECHNICAL DETAILS
Volume: 2,0 m³Weight: 350 kg.(packaging/wood case included).
Volume: 2,0 m³Weight: 350 kg.K2 - TECHNICAL DETAILS
8901/2016
L = WidthP = DepthH = HeightPr = Price code
700 max. 40 mm.23413530
680222558 58
84096
0
53359648059658 4 4 4 4 4 58
53359648059658 4 4 4 4 4 58
738
738
833
80
738
738
833
80
K2 - Dimensions of the structure with sliding worktop.
K2 - Internal fitting, example 1
K2 - Internal fitting, example 2
K 2 / K 3 / K 4
K2 - TECHNICAL DETAILS
Volume: 2,3 m³Weight: 400 kg.(packaging/wood case included).
Volume: 2,3 m³Weight: 400 kg.(packaging/wood case included).
90 01/2016
L = WidthP = DepthH = HeightPr = Price code
1
2
34
5
6
7
L. 1
400
mm
.
L. 5
00 m
m.
L. 4
00 m
m.
L. 4
00 m
m.
L. 4
00 m
m.
L. 4
00 m
m.
1/2"
1/2"
1/2"
3/8"
1/2"
3/8"
3/8"3/8"
3/8"3/8"
3/8"
3/8"
Tap kit for k2-k3-k4 blocks: installation details.
K 2 / K 3 / K 4
TECHNICAL DETAILS
ATTENTION !!! – Operations on the plumbing have to be made only by qualified staff.
1 - Cold water inlet.2 - Hot water inlet.3 - Tap of cold water.4 - Tap for hot water.5 - Pull-out hand-shower.6 - Connection element.7 - Internal surface of cabinet.
9101/2016
L = WidthP = DepthH = HeightPr = Price code
Modular base and wall units WITHOUT HANDLE.The front panels are opened through the 30° bevelled edge at the top of the door (base units) or at the bottom of it (wall units) and through any middle handle-rails.Programma STANDARD, XILA or HIDE tall units to be used to complete the com-position.
Carcass
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low formaldehyde emission (class E1/CARB P2), treated with high performance melamine resin. Front and back edges in ABS, same colour.
BASE UNIT SIDE PANEL HEIGHT: 790 mm.SIDE PANEL DEPTH: 380 - 725 mm.DEPTH INCLUDING FRONT PANEL: 405 - 750 mm.MODULE WIDTH: 300 - 450 - 600 - 900 - 1200 mm.
FINISH: melamine.
COLOURS: open-pore grey-graphite oak - Silk white.
Drawers
LEGRABOX system with sides and rear panel in metal, painted with epoxy dusts. Bottom in black melamine and front panel (of internal drawers) in melamine, same finish as carcass. Bottom is provided with non-toxic anti-slip mat.
FINISH: metal + melamine.
COLOURS: matt black.
Doors and front panels
Thickness: 23 mm.30° upper bevelled edge and 45° lateral bevelled edge (on end base units), for the join with the end panels.
FINISHES: Silcover - Ecolak - Wood - Wood Selection - Polyester - Metals - Corian® - Stainless steel - Solid wood.
COLOURS: all range colours/species.
Handle-rails
Made of extruded aluminium profile, in stainless steel or painted finishes.Handle-rail versions: UNDER-MOUNTED (to be used always) and MIDDLE (to be used according to design needs).
COLOURS: Stainless steel - Matt white painted - Matt black painted -Bright white painted (Lamicolor® 754).
Worktops
Please use the specific worktops with 30° front bevelled edge. Upon request the sides can have straight 90° edges or 30° bevelled ones (please see Customised Solutions chapter).
THICKNESS: 50 mm.DEPTH: 415 - 760 - 795 - 1175 mm.
FINISHES: Stainless Steel- Corian® - Solid wood staves - Marble - Stone - Granite - Composite.
COLOURS: all range colours/species.
K 1 4
Plinth
To be ordered separately (Plinth chapter).Made of extruded aluminium profile, in stainless steel or painted finishes, with a patented mechanism for height and depth regulation.
HEIGHT: 80 mm.
COLOURS: Stainless steel - Matt white painted - Matt black painted -Bright white painted (Lamicolor® 754).
TECHNICAL FEATURES
92 01/2016
L = WidthP = DepthH = HeightPr = Price code
K 1 4 BASE UNITS
TECHNICAL DETAILS
2370 2
11253578
140
140
450181
110
20 524
750725
630
7070
70
665573
750
2020
790
80
870 80
580
2
805
620
600
600
410
184
184
80
2
25
2
2541
037
080
2
2370 2
11253578
750725
70 70
66557 3
750
2020
790
80
870
70
2370 2
112
405380
350750
2020
790
80
870 80
580
2
805
370
350
350
410
184
184
80
2
25
2
2541
037
080
2
405380
750
2020
790
80
870
70
2370 2
11253578
750725
630
70
665573
670
100
20
790
80
870 80
580
2
805
620
600
600
410
184
184
80
2
25
2
2541
037
080
280
580
2
2370 2
11253578
750725
70
66557 3
750
2020
790
80
870
70
2370 2
11253578
750725
770
20
790
80
870 80
580
2
80525
410
370
80
2
2370 2
11253578
750725
750
2020
790
80
870
70540
165
110
20
2370 2
112
70
BASE UNITS - STORAGE USE
BASE UNITS - UNDER-HOB USE
BASE UNITS - UNDER-SINK USE
9301/2016
L = WidthP = DepthH = HeightPr = Price code
K 1 4 WALL UNITS
TECHNICAL DETAILS
405380
350
560
202010
600
608
2
405380
350
560
202010
600
608
2
405380
350
680
202010
720
728
2
405380
350
840
202010
880
888
2
405380
350
360
1120
202010
1160
1168
2
163
163
163
163
163
75°(A)100°(B)
WALL UNITS - WITH HINGED DOOR
WALL UNITS - WITH FLAP DOOR
Door opening chosen by client: an opening hinge limiter is supplied to have 75° (A) and 100° (B) angles.
94 01/2016
L = WidthP = DepthH = HeightPr = Price code
K 1 4 WORKTOPS
TECHNICAL DETAILS
405380
415
805
3855 55
55 55
38
802
750
760
725
805
802
75025
795
725405
380750
1175
725
805
3880
2
805
3880
2
10 2335
50
4,5
38
80
70
24
30°
R 2,5
70,525
18,8
UNDER-MOUNTED HANDLE-RAIL MIDDLE HANDLE-RAIL
WALL USE
ISLAND USE
9501/2016
L = WidthP = DepthH = HeightPr = Price code
K 1 4 ACCESSORIES - DOMESTICI series Use examples. MOVE system: the placing of the single parts constituting the accessory is very flexible, it’s possible to choose their type and position, directly on the internal drawer mat or on the optional wood bottom.
1116
1 23 45
MOVE
572
1 23 45
1116
1 23 45
572
1116
1 23 45
MOVE
572
MOVE
+
+
+
+
573
1200
1116
96 01/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Cutlery tray L 600 mm.
• MOVE system.• For drawer L 600 mm.• Multipurpose element (compatible with accessories 1-2-3-4-5) + set of small
boxes (1 with divider, 1 without divider) + 2 clips (to fasten the single parts) + rear compensator element.
• H 55 mm.
572
516
1 23 45
MOVE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY112
DOMESTICI - Cutlery tray with knives holder L 600 mm.
• MOVE system.• For drawer L 600 mm.• Multipurpose element with knives holder (C) + set of small boxes (1 with divi-
der, 1 without divider) + 2 clips (to fasten the single parts) + rear compensator element.
• H 55 mm.
572
516
MOVE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY113
• The DOMESTICI accessories are laid inside the drawer. • All accessories are compatible also with internal drawers. • MOVE system: the placing of the single parts constituting the accessory is very flexible, it’s possible to choose their
type and position, directly on the internal drawer mat or on the optional wood bottom.
K 1 4 ACCESSORIES - DOMESTICI series Complete kits, for LEGRABOX drawers. Accessories in black-dyed ash wood. For units P 750 mm.
DOMESTICI - Cutlery tray L 900 mm.
• MOVE system.• For drawer L 900 mm.• Multipurpose element (compatible with accessories 1-2-3-4-5) + 2 sets of small
boxes (2 with divider, 2 without divider) + 4 clips (to fasten the single parts) + rear compensator element.
• H 55 mm.
572
816
1 23 45
MOVE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY114
DOMESTICI - Cutlery tray with knives holder L 900 mm.
• MOVE system.• For drawer L 900 mm.• Multipurpose element with knives holder (C) + 2 sets of small boxes (2 with
divider, 2 without divider) + 4 clips (to fasten the single parts) + rear compen-sator element.
• H 55 mm.
572
816
MOVE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY115
Technical chart for inside useful sizes - LEGRABOX drawers and internal drawers.
450 900 1200
816516
600
366
300
57
3
57
3
57
3
57
3
57
3
1116216
= = = = =
9701/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Cutlery tray L 1200 mm.
• MOVE system.• For drawer L 1200 mm.• Multipurpose element (compatible with accessories 1-2-3-4-5) + cutlery holder
element + 2 sets of small boxes (2 with divider, 2 without divider) + 4 clips (to fasten the single parts) + rear compensator element.
• H 55 mm.
1116
1 23 45
MOVE
572
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY116
DOMESTICI - Cutlery tray with knives holder L 1200 mm.
• MOVE system.• For drawer L 1200 mm.• Multipurpose element with cutlery + knives holder (C) + 2 sets of small boxes
(2 with divider, 2 without divider) + 4 clips (to fasten the single parts) + rear compensator element.
• H 55 mm.
572
1116
MOVE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY117
K 1 4 ACCESSORIES - DOMESTICI series Complete kits, for LEGRABOX drawers. Accessories in black-dyed ash wood. For units P 750 mm.
98 01/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Smooth bottom L 300 mm.
• MOVE system.• For drawer L 300 mm.• H 13 mm.
216
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY104
DOMESTICI - Smooth bottom L 450 mm.
• MOVE system.• For drawer L 450 mm.• H 13 mm.
366
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY118
K 1 4 ACCESSORIES - DOMESTICI series Complete kits, for LEGRABOX drawers. Accessories in black-dyed ash wood. For units P 750 mm.
DOMESTICI - Smooth bottom L 600 mm.
• MOVE system.• For drawer L 600 mm.• H 13 mm.
516
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY119
DOMESTICI - Smooth bottom L 900 mm.
• MOVE system.• For drawer L 900 mm.• H 13 mm.
816
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY120
DOMESTICI - Smooth bottom L 1200 mm.
• MOVE system.• For drawer L 1200 mm.• H 13 mm.
1116
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY121
9901/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Multipurpose element (B) with knives holder (1). - C
• MOVE system.• H 43 mm.
150
472
43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC029
K 1 4 ACCESSORIES - DOMESTICI series Modular elements, for LEGRABOX drawers. Accessories in black-dyed ash wood. For units P 750 mm.
DOMESTICI - Set of small boxes. - A
• MOVE system.• Set composed of 2 cutlery trays / trays (1 with divider, 1 without divider) + 2 clips
(to fasten the single parts).• H 43 mm.
118
43
300
118
43+
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC023
DOMESTICI - Multipurpose element. - B
• MOVE system.• The accessories 1-2-3-4-5 can be laid inside.• H 43 mm.
150
472
43
1 23 45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC028
DOMESTICI - Rear compensator element L 600 mm.
• MOVE system.• Including bottom.• H 55 mm.
572
516
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC025
DOMESTICI - Rear compensator element L 900 mm.
• MOVE system.• Including bottom.• H 55 mm.
572
816
1 23 45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC026
DOMESTICI - Rear compensator element L 1200 mm.
• MOVE system.• Including bottom.• H 55 mm.
1116
1 23 45
572
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC027
+
100 01/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Element with handles. - H
• MOVE system.• To be laid inside.• Thanks to the handles it can be used as freestanding (outside the drawer itself).• H 50 mm.
200
472
50
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC001
K 1 4 ACCESSORIES - DOMESTICI series Modular elements, for LEGRABOX drawers. Accessories in black-dyed ash wood. For units P 750 mm.
DOMESTICI - Multipurpose element (B) with divider (5). - G
• MOVE system.• H 43 mm.
150
472
43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC033
DOMESTICI - Cutlery tray element. - K
• MOVE system.• H 43 mm.
300
472
43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC024
DOMESTICI - Multipurpose element (B) with coffee pods holder (3). - E
• MOVE system.• H 43 mm.
150
472
43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC031
DOMESTICI - Multipurpose element (B) with spice holder (4). - F
• MOVE system.• H 43 mm.
150
472
43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC032
DOMESTICI - Multipurpose element (B) with film dispenser (2). - D
• MOVE system.• H 43 mm.
150
472
43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC030
+
+
+
+
10101/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Knives holder. - 1
• MOVE system.• To be laid inside the multipurpose element (B).• H 26 mm.
138
472
26
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC014
DOMESTICI - Film dispenser. - 2
• MOVE system.• To be laid inside the multipurpose element (B).• H 38 mm.
138
38
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC015
DOMESTICI - Coffee pods holder. - 3
• MOVE system.• To be laid inside the multipurpose element (B).• H 31 mm.
138
31
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC016
DOMESTICI - Chopping board for bread with handles. - L
• MOVE system.• To be laid inside.• Thanks to the handles it can be used as freestanding (outside the drawer itself).• Chopping board in smoked oak.• H 50 mm.
200
472
50
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC005
DOMESTICI - Spice holder. - 4
• MOVE system.• To be laid inside the multipurpose element (B).• H 26 mm.
138
26
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC017
K 1 4 ACCESSORIES - DOMESTICI series Modular elements, for LEGRABOX drawers. Accessories in black-dyed ash wood. For units P 750 mm.
DOMESTICI - Divider. - 5
• MOVE system.• To be laid inside the multipurpose element (B).• H 38 mm.
138
472
38
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC022
102 01/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Storage element L 600 mm.
• For heavy-duty drawer L 600 mm.• 2 fixed dividers.• Compatible with R-U-V accessories.• H 139 mm.
516
572259
R U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY098
• The DOMESTICI accessories are laid inside the heavy-duty drawer.
DOMESTICI - Storage element L 900 mm.
• For heavy-duty drawer L 900 mm.• 3 fixed dividers.• Compatible with R-U-V accessories.• H 139 mm.
816
572401
R U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY099
DOMESTICI - Storage element L 1200 mm.
• For heavy-duty drawer L 1200 mm.• 3 fixed dividers.• Compatible with R-U-V accessories.• H 139 mm.
1116
572699
R U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY100
DOMESTICI - Plate rack L 600 mm.
• For heavy-duty drawer L 600 mm.• Pre-punched bottom.• 4 flexible cross dividers.• Compatible with R-S-T-U-V accessories.• H 139 mm.
516
572
R S T U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY101
K 1 4 ACCESSORIES - DOMESTICI series Complete kits, for LEGRABOX heavy-duty drawers. Accessories in black-dyed ash wood. For units P 750 mm.
10301/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Plate rack L 900 mm.
• For heavy-duty drawer L 900 mm.• Pre-punched bottom.• 5 movable dividers.• Compatible with R-S-T-U-V accessories.• H 139 mm.
816
572
R S T U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY102
K 1 4 ACCESSORIES - DOMESTICI series Complete kits, for LEGRABOX heavy-duty drawers. Accessories in black-dyed ash wood. For units P 750 mm.
DOMESTICI - Plate rack L 1200 mm.
• For heavy-duty drawer L 1200 mm.• Pre-punched bottom.• 7 flexible cross dividers.• Compatible with R-S-T-U-V accessories.• H 139 mm.
1116
572
R S T U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY103
DOMESTICI - Storage element with lid and holder for oil bottle L 900 mm.
• For heavy-duty drawer L 900 mm.• 3 fixed dividers + lid with handle + divider kit and tray for oil bottle.• Compatible with R-U-V accessories.• H 139 mm.
816
572401
R U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY083
DOMESTICI - Storage element with lid and holder for oil bottle L 1200 mm.
• For heavy-duty drawer L 1200 mm.• 3 fixed dividers + lid with handle + divider kit and tray for oil bottle.• Compatible with R-U-V accessories.• H 139 mm.
1116
572699
R U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY084
DOMESTICI - Storage element with holder for wine decanter L 600 mm.
• For heavy-duty drawer L 600 mm.• Pre-punched bottom.• H 139 mm.
516
572
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY085
DOMESTICI - Storage element with holder for glasses L 600 mm.
• For heavy-duty drawer L 600 mm.• Pre-punched bottom.• H 139 mm.
516
572
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY086
104 01/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Storage element with holder for wine decanter and glasses L 900 mm.
• For heavy-duty drawer L 900 mm.• Pre-punched bottom.• H 139 mm.
816
572
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY087
K 1 4 ACCESSORIES - DOMESTICI series Complete kits, for LEGRABOX heavy-duty drawers. Accessories in black-dyed ash wood. For units P 750 mm.
DOMESTICI - Storage element with holder for wine decanter and glasses L 1200 mm.
• For heavy-duty drawer L 1200 mm.• Pre-punched bottom.• H 139 mm.
1116
572
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY088
DOMESTICI - Storage element with holder for pot lids L 600 mm.
• For heavy-duty drawer L 600 mm.• Pre-punched bottom.• Equipped with set of buffers (anti-slip / noise-reducing).• Noise-reducing felt coating in the space for lids.• H 139 mm.
516
572
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY089
DOMESTICI - Storage element with holder for pot lids L 900 mm.
• For heavy-duty drawer L 900 mm.• Pre-punched bottom.• Equipped with set of buffers (anti-slip / noise-reducing).• Noise-reducing felt coating in the space for lids.• H 139 mm.
816
572
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY090
DOMESTICI - Storage element with holder for pot lids L 1200 mm.
• For heavy-duty drawer L 1200 mm.• Pre-punched bottom.• Equipped with set of buffers (anti-slip / noise-reducing).• Noise-reducing felt coating in the space for lids.• H 139 mm.
1116
572
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY091
10501/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Set of chopping boards. - R
• To be laid inside.• Set composed of 1 base, 1 chopping board for bread 400 x 300 mm, 1 chop-
ping board 400 x 300 mm, 2 chopping boards 150 x 300 mm.• Totally made of black PaperStone®.• H 305 mm.
120
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC018
K 1 4 ACCESSORIES - DOMESTICI series Additional elements, for LEGRABOX heavy-duty drawers. Accessories in black-dyed ash wood. For units P 750 mm.
DOMESTICI - Wine decanter holder. - S
• It can be placed inside accessories with pre-punched bottom .• H 120 mm.
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC019
DOMESTICI - Glasses holder. - T
• It can be placed inside accessories with pre-punched bottom .• H 120 mm.
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC020
DOMESTICI - Bottles holder with handles. - U
• To be laid inside.• Thanks to the handles it can be used as freestanding (outside the drawer itself).• H 160 mm.
232
471
160
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC006
DOMESTICI - Plate rack with handles. - V
• To be laid inside.• Thanks to the handles it can be used as freestanding (outside the drawer itself).• H 96 mm.
250
372
96
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC007
106 01/2016
L = WidthP = DepthH = HeightPr = Price code
K 1 4 ACCESSORIES - PREMIÈRE series Complete kits, for LEGRABOX drawers. Accessories in ash wood / white-dyed MDF. For units P 750 mm.
PREMIÈRE - Cutlery tray L 450 mm.
• For drawer L 450 mm.
572
366
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ058
• The PREMIÈRE accessories are laid inside the drawer.• All accessories are compatible also with internal drawers.
PREMIÈRE - Cutlery tray with knives holder L 600 mm.
• For drawer L 600 mm.• Compatible with C-D-E accessories.
516
45
572CDE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ059
PREMIÈRE - Cutlery tray with accessories L 900 mm.
• For drawer L 900 mm.• Knives holder, spices holder and pair of chopping boards in beechwood.
816
45
572
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ060
PREMIÈRE - Cutlery tray with accessories L 1200 mm.
• For drawer L 1200 mm.• Knives holder, spices holder, stainless steel film dispenser and pair of chopping
boards in beechwood.• Compatible with C-D-E accessories.
1116
45
572CDE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ061
10701/2016
L = WidthP = DepthH = HeightPr = Price code
K 1 4 ACCESSORIES - PREMIÈRE series Modular elements, for LEGRABOX drawers. Accessories in ash wood / white-dyed MDF. For units P 750 mm.
PREMIÈRE - Base for cutlery tray L 600 mm.
• For drawer L 600 mm.• Compatible with C-D-E accessories.
516
45
572
2xC D E
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK025
PREMIÈRE - Base for cutlery tray L 900 mm.
• For drawer L 900 mm.• Compatible with A-B-C-D-E accessories.
816
45
A B
572
2xC D E
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK026
PREMIÈRE - Base for cutlery tray L 1200 mm.
• For drawer L 1200 mm.• Compatible with A-B-C-D-E accessories.
1116
45
A B 2xC D E C D EC D E
572
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK027
PREMIÈRE - Divider. - A
• Compatible with base for cutlery tray L 450 / 600 / 900 / 1200.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK005
PREMIÈRE - Chopping board pair in beechwood. - B
• Compatible with base for cutlery tray L 450 / 600 / 900 / 1200.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK006
PREMIÈRE - Knives holder. - C
• Compatible with base for cutlery tray L 600 / 900 / 1200.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK007
108 01/2016
L = WidthP = DepthH = HeightPr = Price code
K 1 4 ACCESSORIES - PREMIÈRE series Modular elements, for LEGRABOX drawers. Accessories in ash wood / white-dyed MDF. For units P 750 mm.
PREMIÈRE - Stainless steel spice holder. - D
• 5 glass jars.• Compatible with base for cutlery tray L 600 / 900 / 1200.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK008
PREMIÈRE - Stainless steel film dispenser. - E
• Compatible with base for cutlery tray L 600 / 900 / 1200.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK009
10901/2016
L = WidthP = DepthH = HeightPr = Price code
PREMIÈRE - Plate rack L 600 mm.
572
516
204
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ043
K 1 4 ACCESSORIES - PREMIÈRE series Complete kits, for LEGRABOX heavy-duty drawers. Accessories in ash wood / white-dyed MDF. For units P 750 mm.
• The PREMIÈRE accessories are laid inside the heavy-duty drawer.
• For heavy-duty drawer L 600 mm.• 8 removable plate fastenings.
PREMIÈRE - Plate rack with drainboard L 600 mm.
• For heavy-duty drawer L 600 mm.• Removable stainless steel dish draining tray.
572
516
142
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ044
PREMIÈRE - Plate rack L 900 mm.
• For heavy-duty drawer L 900 mm.• 12 removable plate fastenings.
572
816
204
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ045
PREMIÈRE - Plate rack with drainboard L 900 mm.
• For heavy-duty drawer L 900 mm.• Removable stainless steel dish draining tray.• 8 removable plate fastenings.
572
816
142204
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ062
110 01/2016
L = WidthP = DepthH = HeightPr = Price code
PREMIÈRE - Plate rack L 1200 mm.
• For heavy-duty drawer L 1200 mm.• 14 removable plate fastenings.
572
1116
204
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ047
K 1 4 ACCESSORIES - PREMIÈRE series Complete kits, for LEGRABOX heavy-duty drawers. Accessories in ash wood / white-dyed MDF. For units P 750 mm.
PREMIÈRE - Plate rack with drainboard L 1200 mm.
• For heavy-duty drawer L 1200 mm.• Removable stainless steel dish draining tray.• 12 removable plate fastenings.
572
1116
142204
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ063
PREMIÈRE - Storage element L 600 mm.
• For heavy-duty drawer L 600 mm.• Storage tray + 2 removable small containers.
572
516
229
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ064
PREMIÈRE - Storage element L 900 mm.
• For heavy-duty drawer L 900 mm.• Storage tray + 2 removable small containers.• 8 removable plate fastenings.• 2 elastic strips for storage spaces customisation.
572
816
172 229
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ065
PREMIÈRE - Storage element L 1200 mm.
• For heavy-duty drawer L 1200 mm.• Storage tray + 2 removable small containers.• 12 removable plate fastenings.• 3 elastic strips for storage spaces customisation.
572
1116
172 229
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ066
11101/2016
L = WidthP = DepthH = HeightPr = Price code
EASY - Cutlery tray L 300 mm.
572
216
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV093
K 1 4 ACCESSORIES - EASY series Complete kits, for LEGRABOX drawers. Accessories in grey graphite-dyed oak. For units P 750 mm.
• The EASY accessories are laid inside the drawer.• All accessories are compatible also with internal drawers.
• For drawer L 300 mm.
EASY - Cutlery tray L 450 mm.
• For drawer L 450 mm.
572
366
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV094
EASY - Cutlery tray L 600 mm.
• For drawer L 600 mm.• Compatible with accessory A.
572
516
45
123
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV095
EASY - Cutlery tray with knives holder L 600 mm.
• For drawer L 600 mm.• Compatible with accessory A.
572
516
45
123
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV096
112 01/2016
L = WidthP = DepthH = HeightPr = Price code
EASY - Cutlery tray L 900 mm.
• For drawer L 900 mm.• Compatible with accessory A.
572
816
45
123
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV097
K 1 4 ACCESSORIES - EASY series Complete kits, for LEGRABOX drawers. Accessories in grey graphite-dyed oak. For units P 750 mm.
EASY - Cutlery tray with knives holder L 900 mm.
• For drawer L 900 mm.• Removable chopping board in polyethylene.
572
816
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV098
EASY - Cutlery tray with knives holder L 1200 mm.
• For drawer L 1200 mm.• Removable chopping board in polyethylene.• Compatible with accessory A.
572
1116
45
123
A
123
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV099
EASY - Spice holder. - A
• To be placed inside the cutlery trays cod. AACV083 / AACV084 / AACV085 / AACV087.
• 4 glass jars with cover in chromium-plated metal.
121
452
16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV008
EASY - Sliding chopping board.
• For drawer L 600 mm.• Removable and sliding chopping board in polyethylene.• To be used upon cutlery tray, on drawer sides.• H 40 mm.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV023
EASY - Sliding chopping board for bread.
• For drawer L 600 mm.• Removable and sliding chopping board in polyethylene.• To be used upon cutlery tray, on drawer sides.• H 40 mm.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV025
11301/2016
L = WidthP = DepthH = HeightPr = Price code
EASY - Bottles holder L 450 mm.
572
45
366
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV100
K 1 4 ACCESSORIES - EASY series Complete kits, for LEGRABOX heavy-duty drawers. Accessories in grey graphite-dyed oak. For units P 750 mm.
• The EASY accessories are laid inside the heavy-duty drawers.
• ONLY for lower heavy-duty drawer L 450 mm.
EASY - Bottles holder L 600 mm.
• ONLY for lower heavy-duty drawer L 600 mm.
572
45
516
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV101
EASY - Plate rack L 600 mm.
• ONLY for lower heavy-duty drawer L 600 mm.• 5 removable plate fastenings.
516
205
572
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV102
EASY - Plate rack L 900 mm.
• ONLY for lower heavy-duty drawer L 900 mm.• 9 removable plate fastenings.
572
816
45
205
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV103
114 01/2016
L = WidthP = DepthH = HeightPr = Price code
EASY - Plate rack L 1200 mm.
• ONLY for lower heavy-duty drawer L 1200 mm.• 15 removable plate fastenings.
572
205
45
1116
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV104
K 1 4 ACCESSORIES - EASY series Complete kits, for LEGRABOX heavy-duty drawers. Accessories in grey graphite-dyed oak. For units P 750 mm.
11501/2016
L = WidthP = DepthH = HeightPr = Price code
K 1 4 ACCESSORIES - STORAGE SYSTEM series TECHNICAL DETAILS
450
57
3
L=366
57
3
L=516
600 900
L=816
57
3
57
3
1200
L=1116
57
3
300
L=216
Technical chart for inside useful sizes. - LEGRABOX internal drawers, drawers and heavy-duty drawers.
• Aluminium corner compensators (between drawer sides and accessory).• To be glued, during the installation, with bi-adhesive on side of terminal STORAGE SYSTEM element.
20
L15/20 15/20
15
15
20
W W
Detail of corner compensators. - LEGRABOX internal drawers, drawers.
450 900
L=785L=502
600
L=352
300
59
1
59
1
59
1
59
1
L=202
1200
L=1085
59
1
Technical chart for inside useful sizes. - ALLUMINIUM DESIGN BOFFI drawers and heavy-duty drawers.
• Useful drawer depth: P 591 mm.• Accessories depth: P 581 mm.
116 01/2016
L = WidthP = DepthH = HeightPr = Price code
K 1 4 ACCESSORIES - STORAGE SYSTEM series TECHNICAL DETAILS
ABN
BN
BN
BN
AHFE
ILM
450
366
450
600 900
816
900600
BN
A
300
573
573
573
573
573
573
573
216
W W
20 20366
20 20516
20 20816
20 20
300
573
21615
DG
BN
BN
BN I
LM
BN
51615
BN
EFH
EFH
BN
15
W W W W W W
W W W
R T
BN
BN
C
RS RS S
R S RS RS S
Use example of the STORAGE SYSTEM accessories inside the LEGRABOX drawers.
900
816516
600
573
573
1200
1116
573
U
U
U
U Z
Z
U
U
V
Z
Z
Use example of the STORAGE SYSTEM accessories inside the LEGRABOX heavy-duty drawers.
352
581
202 502 785
AH
DI
EG BC C 591 581 591 581 591 581 591
R T R T TS
Use example of the STORAGE SYSTEM accessories inside the ALUMINIUM DESIGN BOFFI drawers.
11701/2016
L = WidthP = DepthH = HeightPr = Price code
STORAGE SYSTEM - Ladles holder. - A
471
74
63A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA011
K 1 4 ACCESSORIES - STORAGE SYSTEM series Modular elements, for LEGRABOX drawers and for ALUMINIUM drawers DESIGN BOFFI. Accessories in melamine-coated grey-graphite oak with aluminium dividers. For units P 750 mm.
• The STORAGE SYSTEM accessories are laid inside the drawer.• All accessories are compatible also with internal drawers.• Each drawer can accommodate accessory compositions up to fill the inside useful width.
• Compatible with drawers.
STORAGE SYSTEM - Ladles holder. - B
• Compatible with drawers.
471
100
63B
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA012
STORAGE SYSTEM - Ladles holder. - C
• Compatible with drawers.
471
124
63C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA013
STORAGE SYSTEM - Cutlery tray. - D
• Compatible with drawers.
471
200
63D
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA014
Technical chart for inside useful sizes - LEGRABOX drawers and internal drawers.
450 900 1200
816516
600
366
300
57
3
57
3
57
3
57
3
57
3
1116216
= = = = =
118 01/2016
L = WidthP = DepthH = HeightPr = Price code
STORAGE SYSTEM - Cutlery tray. - E
• Compatible with drawers.
471
300
63
E
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA015
K 1 4 ACCESSORIES - STORAGE SYSTEM series Modular elements, for LEGRABOX drawers and for ALUMINIUM drawers DESIGN BOFFI. Accessories in melamine-coated grey-graphite oak with aluminium dividers. For units P 750 mm.
STORAGE SYSTEM - Film dispenser. - F
• Compatible with drawers.
471
300
63
F
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA016
STORAGE SYSTEM - Spice holder. - G
• Compatible with drawers.
471
200
63G
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA017
STORAGE SYSTEM - Medicine holder. - H
• Compatible with drawers.
471300
63
H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA018
STORAGE SYSTEM - Ladles holder. - I
• Compatible with drawers.
471
400
63
I
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA019
STORAGE SYSTEM - Knives holder. - L
• Compatible with drawers.• Knives holder in polyethylene.
471
400
63
L
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA020
11901/2016
L = WidthP = DepthH = HeightPr = Price code
STORAGE SYSTEM - Knives holder + chopping board. - M
• Compatible with drawers.• Knives holder and chopping board in polyethylene.
471
400
63
M
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA021
K 1 4 ACCESSORIES - STORAGE SYSTEM series Modular elements, for LEGRABOX drawers and for ALUMINIUM drawers DESIGN BOFFI. Accessories in melamine-coated grey-graphite oak with aluminium dividers. For units P 750 mm.
STORAGE SYSTEM - Storage tray. - N
• Compatible with drawers.
471
100
63N
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA022
STORAGE SYSTEM - Depth compensator element. - R
• Compatible with drawers.• To be used on each equipped drawer, in widths as needed.
100
174
63
R
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAOJ001
STORAGE SYSTEM - Depth compensator element. - S
• Compatible with drawers.• To be used on each equipped drawer, in widths as needed.
100
300
63S
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAOJ002
STORAGE SYSTEM - Depth compensator element. - T
• Compatible with drawers.• To be used on each equipped drawer, in widths as needed.
100
324
63T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAOJ003
STORAGE SYSTEM - Corner compensator kit. - W
• To compensate lateral spaces.
571
20
15
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAAB046
120 01/2016
L = WidthP = DepthH = HeightPr = Price code
STORAGE SYSTEM - Storage container for food. - U
475
285
250
U
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA050
K 1 4 ACCESSORIES - STORAGE SYSTEM series Modular elements, for LEGRABOX heavy-duty drawers and for ALUMINIUM heavy-duty drawers DESIGN BOFFI. Accessories in solid grey-graphite oak. For units P 750 mm.
• The STORAGE SYSTEM accessories are laid inside the heavy-duty drawer.• Each drawer can accommodate accessory compositions up to fill the inside useful width.
PL
• Compatible with heavy-duty drawers.• Finish: solid grey-graphite oak.
STORAGE SYSTEM - Storage container for food. - V
• Compatible with heavy-duty drawers.• Finish: solid grey-graphite oak.• Flexible cross divider.
300
571
250
V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA051
STORAGE SYSTEM - Storage container for food. - Z
• Compatible with heavy-duty drawers.• Finish: solid grey-graphite oak.
300
285
250
Z
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA052
Technical chart for inside useful sizes - LEGRABOX heavy-duty drawers.
450 900
L=816L=516
600
L=366
300
57
3
57
3
57
3
57
31200
L=1116
57
3
L=216
12101/2016
L = WidthP = DepthH = HeightPr = Price code
Modular base units without handle, wall or peninsula/island versions available char-acterised by wrapping doors and end panels. _ Terminal parts with 45° bevelled edges. _ The wrapping shape of front panels hides, with close doors, the worktop thickness giving a monolithic appearance to the composition. _ The front opening is allowed thanks to the upper protruding part (on the worktop) of the front itself. _ A middle handle-rail in extruded aluminium is set when drawers and heavy-duty drawers are used. _ Worktops with basin effect and stainless steel optional acces-sorisable back panels complete this kitchen.
NOTES TO DESIGNER
All base units used in wall compositions need back spacers (1 spacer each unit, to be ordered separately): 30 mm deep (P 30 mm) spacers in compositions with 630 mm deep (P 630 mm) worktop, 125 mm deep (P 125 mm) spacers in compositions with 725 mm deep (P 725 mm) worktop. Proper 130 or 150 mm spacers are neces-sary in island compositions to create, between opposite base units, the passage of duct hood system. _ Total base unit height: 838 mm (side panel h. 790 mm + 48 mm upper protruding part of the door) / 900 mm (side panel h. 852 mm + 48 mm upper protruding part of the door).
Carcass
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low formaldehyde emission (class E1/CARB P2), treated with high performance melamine resin. Front and back edges in ABS, same colour.
SIDE PANEL HEIGHT: 790 mm (plinth H 80 mm.) - 852 mm (plinth H 50 mm). SIDE PANEL DEPTH: 320 - 470 - 600 mm. DEPTH INCLUDING FRONT PANEL: 345 - 495 - 625 mm. MODULE WIDTH: 300 - 450 - 600 - 900 - 1200 mm.
FINISH: melamine.
COLOURS: open-pore grey-graphite oak - Silk white.
Drawers
LEGRABOX system with sides and rear panel in metal, painted with epoxy dusts. Bottom in black melamine and front panel (of internal drawers) in melamine, same finish as carcass. Bottom is provided with non-toxic anti-slip mat.
FINISH: metal + melamine.
COLOURS: matt black.
Doors / front panels / panels
The upper protruding part of front panels is always 48 mm with respect to the unit side panel. The 45° bevelled edges are on doors, fronts and panels at the end of composition.
Thickness: 23 mm (35 mm in the upper wrapping part).
FINISHES: Silcover - Ecolak - Wood - Wood Selection - Metals - Corian® - Stainless steel - Solid wood.
COLOURS: all range colours/species.
Grip
In finish (monolithic aspect), when used on door in SILCOVER, ECOLAK, METALS and CORIAN®.
Consisting of stainless steel profile when used on STAINLESS STEEL door.
Consisting of aluminium profile, Stainless steel finish, when used on doors in WOOD/WOOD SELECTION/SOLID WOOD.
Handle-rail
K 2 0TECHNICAL FEATURES
Made of anodised aluminium, for middle use only.
FINISHES: stainless steel - matt white - bright white Lamicolor® 754 - matt black.
Worktops
The worktops have a basin effect and are covered by wrapping frontal or end panels. They are arranged for the assembly of under-mounted/semi-flush-mounted/flush-mounted or welded sinks and hobs.
THICKNESS: 38 mm 28 mm + 10 mm elevated edge).DEPTH: 630 - 725 (the version for stainless steel accessorisable back panels is available too) - 920 - 1070 - 1200 mm.
FINISHES: Corian® - C.R.S. Scotch Brite Stainless Steel (satin direction along the worktop length) - Marble - Stone - Granite.
Accessorisable back panels
The back panels are made of C.R.S. Scotch Brite stainless steel (horizontally satin), equipped with LED linear lighting. Small storage compartments with flap opening can be cut-out. A back panel with totally concealed down-draft hood is available.
HEIGHT: 294 mm. DEPTH: 200 mm.
FINISHES: C.R.S. Scotch Brite stainless steel.
Version in Corian®.
Version in stainless steel. Door in Corian®, detail.
122 01/2016
L = WidthP = DepthH = HeightPr = Price code
K 2 0TECHNICAL DETAILS Base units.
69
D S DS
630
655
60025 30
838
80725
750
60025 125
838
184
184
432
342
2
80
920
970
600 32025 25
1070
1120
600 32015025 25
1070
1120
600 47025 25
1200
1250
600 60025 25
1200
1250
600 47013025 25
630
655
60025 30
900
50
25
900
50
725
750
600 125
20
34
370
432
342
215
215
432
342
2
432
432
342
35
848
105
528 38
23 2
*
**
+23+23 +23+23
WALL-MOUNTED
ISLAND
END USE - How to define the right (D) version and the left (S) one.
Base units with drawers / heavy-duty drawers
Detail of front panels
= Passage for any hood duct system
HINGED DOOR Pull-out door
Drawers
12301/2016
L = WidthP = DepthH = HeightPr = Price code
K 2 0 ACCESSORIES - EASY series Modular elements, for LEGRABOX drawers. Accessories in grey graphite-dyed oak. For units P 495 mm. For units with side panel P 625 mm please use the specific accessories (Accessories chapter).
• The EASY accessories are laid inside the drawer.• All accessories are compatible also with internal drawers.
EASY - Cutlery tray L 450 mm.
• For drawer L 450 mm.
372
359
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV105
EASY - Cutlery tray L 600 mm.
• For drawer L 600 mm.
372
509
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV106
124 01/2016
L = WidthP = DepthH = HeightPr = Price code
K 2 0 ACCESSORIES - EASY series Modular elements, for LEGRABOX heavy-duty drawers. Accessories in grey graphite-dyed oak. For units P 495 mm. For units with side panel P 625 mm please use the specific accessories (Accessories chapter).
• The EASY accessories are laid inside the drawer.
EASY - Bottle rack L 600 mm.
• ONLY for lower heavy-duty drawer L 600 mm.
372
509
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV110
EASY - Storage tray L 450 mm.
• ONLY for lower heavy-duty drawer L 450 mm.• 3 movable dividers.
372
359
14545
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV107
EASY - Storage tray L 600 mm.
• ONLY for lower heavy-duty drawer L 600 mm.• 5 movable dividers.
372
509
45145
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV108
EASY - Bottle rack L 450 mm.
• ONLY for lower heavy-duty drawer L 450 mm.• H 45 mm.
372
359
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV109
12501/2016
L = WidthP = DepthH = HeightPr = Price code
EASY - Chopping-board.
• They can be placed inside the inset on K20 worktops 630 and 725 mm deep - P 630 mm and P 725 mm - (for accessorisable back panels).
• Thanks to the handles they can be placed on any surface.
600
250 40
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV076
EASY - Tray.
• They can be placed inside the inset on K20 worktops 630 and 725 mm deep - P 630 mm and P 725 mm - (for accessorisable back panels).
• Thanks to the handles they can be placed on any surface.
600
250 60
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV077
K 2 0 ACCESSORIES - EASY series For worktops / back panels K20. Accessories in thermo-treated wood.
EASY - Small storage compartment.
• Specific tray for storage compartment with flap opening, of K20 back panel.
250
90 90
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV111
126 01/2016
L = WidthP = DepthH = HeightPr = Price code
Modular tall units with single side structural panel, doors in honeycomb board that can be hinged, side-recessing or folding side-recessing.
HINGED DOOR: modules STORAGE use (with bottom and feet).It can be equipped with: internal accessories specific for modules with hinged door.
SIDE-RECESSING DOOR: modules, STORAGE use (with bottom and feet or bridge version)/ FOR HOB / FOR SINK/ LAUNDRY USE (bridge version).The modules with bottom and feet can be equipped with specific internal acces-sories for modules with side-recessing door.The bridge modules (without feet) can be equipped with: Programma STANDARD base units H790 or specific internal tall units H 1900, totally melamine coated, in same finish as carcass. Specific stainless steel worktops (with back-splashes).
FOLDING SIDE-RECESSING DOOR: modules, MULTIPURPOSE use (bridge).It can be equipped with: Programma STANDARD base units H 790 or specific in-ternal units (base and tall units) melamine-coated or finished. Specific stainless steel worktops (with back-splashes) or standard worktops P 630 (thickness: 12/20 mm),upper blocks, shelves and back panels.
The handle is compulsory on all doors (recessing, folding recessing or hinged) and can be chosen from Boffi range. It has to be positioned VERTICALLY ONLY. In case of compositions with recessing doors with external handle please use always the specific fillers.
Modules - carcass / multipurpose side panels
It’s made of 28 mm thick wood particle board panels , waterproof (class V100), with low formaldehyde emission (class E1/CARB P2), treated with high performance melamine resin. Front and back edges in ABS, same colour. Back panel 8 mm thick.2 different typology options are possible, which can be perfectly integrated: Module WITH BOTTOM AND FEET: compatible with 80 or 120 mm plinth. Total H = H of module + H of plinth.BRIDGE module: without bottom and feet, with side panels whose height includes the plinth one and cut-out for plinth. Compatible with 80 or 120 mm plinth. Total H = module H.
SIDE PANEL of modules with BOTTOM AND FEET: H. 2130 - 2340 - 2500 mm.SIDE PANEL of BRIDGE MODULES: H. 2210 - 2250 - 2420 - 2460 - 2580 - 2620 mm.SIDE PANEL DEPTH: 700 - 733 mm.DEPTH INCLUDING FRONT PANEL: 758 mm.MODULE WITH HINGED DOOR: W. 422 - 572 - 722 - 872 - 1172 mm.MODULE WITH SIDE-RECESSING DOOR: W. 531 - 681 - 790 - 1090 - 1390 mm.MODULE WITH FOLDING SIDE-RECESSING DOOR: W.1338 - 1966 - 2676 mm.
FINISH: melamine.
COLOURS: open-pore grey-graphite oak - Silk white.
Drawers
LEGRABOX system with sides and rear panel in metal, painted with epoxy dusts. Bottom in black melamine and front panel (of internal drawers) in melamine, same finish as carcass. Bottom is provided with non-toxic anti-slip mat.
FINISH: metal + melamine.
COLOURS: matt black.
Doors / front panels / end panels
Honeycomb doors/front panels (23 mm thick) or end panels (28 mm thick), with ad-justable anti-warping rod fully integrated. Handle: VERTICAL positioning compulsory _ The hinged doors have specific VISIBLE hinges in AISI 304 stainless steel, with triple adjustment and closing magnet.
FINISHES: Lasermat - Silcover - Ecolak - Wood - Wood Selection - Metals - Polyester.
COLOURS: all range colours/species.
H I D E T A L L U N I T STECHNICAL FEATURES
Handles
Each front panel should have an handle, to be chosen from the range, with or without a price increase. _ VERTICAL POSITIONING COMPULSORY. _ The horizontally positioned handles cannot be used (e.g.: LT).
Internal handles
Internal drawer units for modules with hinged / side-recessing door: without handle, lateral grip.
Internal base and tall units, specific for modules with folding side-recessing door: without handle, push opening mechanism(tip-on). Door with handle available on request.
Each door of any Programma STANDARD base units or tall units inside Hide tall units must have an external handle, to be chosen from the Boffi range. ATTENTION !!! - push opening system TIP-ON. SINGLE PULL-OUT DOORS require the SERVO-DRIVE system, to be ordered separately.
Worktops
12 mm thick worktop (compatible with side-recessing door modules for hob /sink and/or multipurpose storage modules with folding side-recessing door) in matt satin stainless steel, with integrated short back-splash H 68 mm on 3 sides. The worktop can be equipped with electrical appliances (welded version only in matt satin stainless steel finish), accordingly to the cut-out dimensions indicated on the drawing. Modules for folding side-recessing door can also be equipped with standard worktops P 630 (12/20 mm thick) .
THICKNESS: 12 mm.LENGTH: 1032 - 1332 mm (side-recessing door) / 1200 - 1800 - 2400 (folding side-recessing door).DEPTH: 630 mm.HEIGHT (black-splashes included): 68 mm.
FINISHES: matt satin stainless steel.
Lighting
LED bar lamp with switch through a motion sensor. Supply polarized cable. Each lamp is supplied in the length relating to the module on which it is mounted.
ABSORPTION: 17 W per linear metre.TRANSFORMER: 24 V - 60 W.VOLTAGE: 100 ÷ 240 V - 50 ÷ 60 Hz (compatible with EUROPE / USA markets).COLOUR TEMPERATURE: 2700 K.
ATTENTION !!!
The use of electrical appliances inside compositions of Hide tall units is allowed ONLY with open doors.
ALL aluminium visible parts (vertical spacers of drawer units, front trims of shelves etc.) of HIDE collection are in ALUMINIUM, MATT BLACK PAINTED.
12701/2016
L = WidthP = DepthH = HeightPr = Price code
H I D E T A L L U N I T SNOTES TO DESIGNER
Modul dimensions and door typologies.
28
700758
23
2855
28531
610
596
L 600
2855 55
28790 2855 55
281090 2855 55
281390
2855
28681
28
700758
23 446 446
L 900
596 596
L 1200
760
746
L 750
503
734 1034
746 746
L 1500
1334
653
E
F
G
H
F + H
2855
28531
610
596
L 600
2855
28681
760
746
L 750
503 653
28
28
700758
23
28422 28 28572
474
460
460
446
L 450
624
610
610
596
L 600
28 28722
774 A
B
C
D
B+B
C+D
C+B
B+C
760
760
746
L 750
28
28
700758
23
28872
460
460
446 446
446
446 460
460
L 900
28 281172
610
610
596 596
596
596 610
610
L 1200
Hinged door
VISIBLE HINGES (SEE THE PIC-TURE) IN STAINLESS STEEL, 180° OPENING.
Each module must be completed using door and multipurpose side panels in order to be connected to another module or to end the composition.
The door has to be chosen considering the desired overlays and the overlays of the doors of the adjacent modules. In case of modules for double door please consider ALWAYS, for both door, the side without hinges (middle module) with partial overlay, as shown in these examples nearby.
Typologies:
A - total/total overlay (single door use only)
B - partial /partial overlay (single door use/double)
C - total/partial overlay (single door use/double)
D - partial/total overlay (single door use/double)
SIDE-RECESSING DOOR
Each module must be completed using door, the connecting kit and the multipur-pose side panels in order to be connected to another module or to end the composition. The side panel included in the module is necessary only as support for the recessing mechanism and not for ending the module.
The door has to be chosen considering the desired overlays and the overlays of the doors of the adjacent modules. In case of modules for double door please consider ALWAYS, for both door, the side without hinges (middle module) with partial overlay, as shown in these examples nearby.
Typologies:
E - Side-recessing overlay/total overlay, recessing side on the left (single door use only)
F - Side-recessing overlay/partial overlay, recessing side on the left (single/double door use)
G - Total overlay/side-recessing overlay, recessing side on the right (single door use only)
H - Partial overlay/side-recessing overlay, recessing side on the right (single/double door use)
128 01/2016
L = WidthP = DepthH = HeightPr = Price code
H I D E T A L L U N I T SNOTES TO DESIGNER
Modul dimensions and door typologies.PLEASE CHECK ALWAYS THE FEASIBILITY OF ANY CUSTOMISED (OR NOT INCLUDED ON THE PRICE LIST) MODULES OR INTERNAL EQUIPMENTS.
L 1200 L 1200
L 1800 L 1800
L 2400
L M
28 28110 1101200 1200
1338 1338
28 2828 28
1200
664 664 664 664
1200
N O
28 110 1101800 1800
1966 1966
28 2828
28
55/110 55/110
2828
28
733758
23
1800 1800
669 669 669 669 669 669
733758
23
P
28 110 2400
2676
2828110
28
2400
664 664 664 664
733758
23
FOLDING SIDE-RECESSING DOOR
Each module must be completed using door and multipurpose side panels in order to be connected to another module or to end the composition. The side panel included in the module is necessary only as support for the recessing mechanism and not for ending the module. The connecting kit (on side of recessing door) must be ordered separately for the L 1800 module only (folding side recessing door on one side and recessing on the other).
Typologies:
L - Single L 1200, folding side-recessing door overlay / no overlay (single door use/recessing side on the left).
M - Single L 1200 no overlay/folding side-recessing door overlay (single door use/recessing side on the right).
N - Kit L 1800 folding side-recessing doors overlay/side-recessing door overlay. The folding doors recess to the left and the single side-recessing door to the right. The use of these kits is compulsory.
O - Kit L 1800 side-recessing doors overlay/folding side-recessing door overlay. The single door recesses to the left and the folding doors to the right. The use of these kits is compulsory.
P - Kit L 2400 folding side-recessing doors overlay/folding side-recessing. The use of these kits is compulsory.
12901/2016
L = WidthP = DepthH = HeightPr = Price code
H I D E T A L L U N I T SNOTES TO DESIGNER
Dimensions of niche composition WITH END PANELS.
B
B1
A
AA1
100
100
A1 = A + 100 + 100 mm B1 = B + 20 mm (in case of folding side-recessing door B1 = B + 50 mm). The 100 mm. space is necessary for the correct tall units assembly. For different requests please contact Boffi.
209523052465
210923192479
212623362496
=
50 35
ø 25
=
GRIP Vertical, right or left Extruded aluminium, stainless steel finishing. • Compatible ONLY with single door H
2130 / 2340 / 2500 mm.
H I D E T A L L U N I T S HANDLES - With price increase
Please use the price increase cod. JZMK01 per each handle.
MATERIALSTANDARD POSITIONINGSERIES AND DIMENSIONS
130 01/2016
L = WidthP = DepthH = HeightPr = Price code
80 - 120
80 - 120
1000 - 1040
X
80 - 120
870 - 910
H I D E T A L L U N I T S TECHNICAL DETAILS HANDLE ALIGNEMENT Handle to be positioned VERTICALLY ONLY.
ALIGNEMENT WITH SINGLE DOORS
ALIGNEMENT OF SINGLE DOORS WITH DOUBLE DOORS (VERTICAL POSITIONING)
ALIGNEMENT OF SINGLE DOORS WITH DOUBLE DOORS (VERTICAL + HORIZONTAL POSITIONING)
HIDE tall units (HINGED DOOR - SIDE-RECESSING DOOR - FOLDING SIDE-RECESSING DOOR)
Programma STANDARD tall units
The height changes according to the handle chosen ( please see the GENERAL TECHNICAL INFORMATION part - HANDLES )
X =
13101/2016
L = WidthP = DepthH = HeightPr = Price code
L 1200
L 1800
L 2400
L 1200
L 1800
optional
optional optional
optional* *
H I D E T A L L U N I T S TECHNICAL DETAILS FOLDING SIDE-RECESSING DOOR - HANDLES POSITIONING Handle to be positioned VERTICALLY ONLY.Peremptory rules for handle positioning on modules with folding side-recessing door.* = please use a 100 mm filler on modules L 1800, when an optional handle on single side-recessing door is used.
132 01/2016
L = WidthP = DepthH = HeightPr = Price code
H I D E T A L L U N I T SSIDE-RECESSING DOOR - EQUIPPED WITH PROGRAMMA STANDARD BASE UNITS H 790 mm AND INTERNAL TALL UNITS H 1900 mm.
Design and cost information for modules equipped with Programma STANDARD base units or internal tall units.
900 / 1200
+
67
67
1090 / 1390
=900 / 1200
67
67
28
28
1090 / 1390
790
625
+1x2x
+
=
1090 / 1390 1090 / 1390
900 / 1200
67
67
28
28
1032 / 1332900 / 120067
67
Programma STANDARD BASE UNITS
The internal compartment of HOB / SINK bridge modules for double SIDE-RECESSING DOOR ONLY can be fitted with Programma STANDARD (H 790 mm - P 625 mm) base units, which are totally melamine-coated (20 mm. frontal panels included). Please consider the following criteria:
• PRICE of Programma STANDARD melamine-coated base unit = price of Decomat - 5%.
• Please complete the internal composition of base units with specific melamine-coated fillers cod. ACNJ001 and with worktop in matt satin stainless steel cod. UDBG01/2. The back panel in matt satin stainless steel cod. SIAJMA03/4 is optional. Alternatively is possible to use standard worktops P 630 mm, H 12/20 mm in finish, to be chosen on the price list.
• Optional elements: dishwasher door kit with base, under-mounted refrig-erator door kit with base and base for under-mounted wine cellar. To be completed with specific fillers cod. DBBC089.
• Please indicate the desired handle for doors with COMPULSORY EXTER-NAL HANDLE.
• Each base unit can be equipped with all internal accessories compatible with Programma STANDARD.
INTERNAL TALL UNITS
The internal compartment of STORAGE bridge modules for double SIDE-RECESSING DOOR ONLY can be fitted with internal tall units H 1900 mm, which are totally melamine-coated (20 mm. frontal panels included). Please consider the following criteria:
• Please complete the internal composition of tall units with specific mela-mine-coated fillers cod. ACNJ002.
• Please indicate the desired handle for doors with COMPULSORY EXTER-NAL HANDLE.
13301/2016
L = WidthP = DepthH = HeightPr = Price code
H I D E T A L L U N I T SFOLDING SIDE-RECESSING DOOR -INTERNAL EQUIPMENT.
Design and cost information for modules equipped.PLEASE CHECK ALWAYS THE FEASIBILITY OF ANY CUSTOMISED (OR NOT INCLUDED ON THE PRICE LIST) MODULES OR INTERNAL EQUIPMENTS.
=
+
==
=
+
N. x
1 x
=
+
INTERNAL EQUIPMENT
The CUSTOMISED bridge modules for FOLDING SIDE-RECESSING DOOR can be fitted with:
• Specific UPPER base units (melamine-coated or finished) matched with LOWER base units (melamine-coated). With push opening TIP-ON mecha-nism or, on request, with handle.
• The Programma STANDARD base units (H 790 - P 625) are melamine-coated (price = Decomat -5%) or finished. The handle is compulsory, to be chosen from the Boffi range. ATTENTION !!! - Doors with NO HANDLE can be supplied, upon request and free of charge, with the push opening system TIP-ON. SINGLE PULL-OUT DOORS require the SERVO-DRIVE system, to be ordered separately.
• Specific internal tall units, melamine-coated or finished. Push opening TIP-ON mechanism or, upon request, with handle.
• Worktops in matt satin stainless steel, with short back-splashes cod. UDBG03/04/05 or standard worktops P 630 - H 12/20 mm in all finishes included on the price list.
• Melamine-coated upper units with melamine-coated shelves H 130.• Melamine-coated or finished back panels, with melamine-coated shelves
H 58.• Back panels between top and shelves, melamine-coated or finished.
Example 1
Example 2
Example 3
134 01/2016
L = WidthP = DepthH = HeightPr = Price code
Modular kitchen composed by base or tall units completed with a totally integrated-self-standing structure, equipped with folding door, which opens upwards electroni-cally, and with worktop and electrical appliances inside. It’s available WITHOUT HANDLE (with handle-rail and XILA spacers) or WITH HAN-DLE (Boffi range, Aprile handle excluded). The self-standing structure (working area concealed by folding door) is equipped with back panel, internal side panels, shelves, open-faced units and upper internal panel in different finishes. Each structure should be completed with a standard worktop P 630 mm and can be equipped with hood (WD35 or 607) and suspended compartment for oven too. The ON-OFF ST tall units with side-recessing door can be perfectly integrated with Programma STANDARD or XILA tall units and relative spacers.Each composition is completed with finished perimeter panels, 14 mm. thick.ATTENTION! The use of gas hobs is highly not recommended. Should gas hobs be installed, the Client must provide for a safety thermo-valve. Boffi will not be liable for problems arising during installation and test of this valve.
Carcass
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low formaldehyde emission (class E1/CARB P2), treated with high performance melamine resin. Front and back edges in ABS, same colour.
BASE UNIT SIDE PANEL HEIGHT: 660 - 790 mm.BASE UNIT SIDE PANEL DEPTH : 600 mm (+ 145 mm, the rear spacer is included in the base unit).BASE UNIT DEPTH INCLUDING FRONT PANEL: 770 mm.BASE UNIT MODULE WIDTH : 600 mm.
TALL UNIT SIDE PANEL HEIGHT: 2000 - 2130 mm (H 2000 with external handle only).SIDE PANEL DEPTH OF TALL UNIT WITH SIDE RECESSING: 745 mm.DEPTH OF TALL UNIT WITH SIDE RECESSING DOOR INCLUDING FRONT PANEL: 770 mm.WIDTH OF TALL UNIT MODULE WITH SIDE RECESSING DOOR: 750 mm (it can be integrated with Programma STANDARD or XILA tall units, in all widths listed).
FINISHES: open-pore grey-graphite oak - Silk white.
Drawers
LEGRABOX system with sides and rear panel in metal, painted with epoxy dusts. Bottom in black melamine and front panel (of internal drawers) in melamine, same finish as carcass. Bottom is provided with non-toxic anti-slip mat.
FINISH: metal + melamine.
COLOURS: matt black.
Doors and front panels
Thickness: 23 mm, WITHOUT or WITH HANDLE.
FINISHES: Lasermat - Silcover - Ecolak - Wood - Wood Selection - Metals - Stain-less Steel.
COLOURS: all range colours/species.
Plinths - Handle-rails - Spacers
Extruded anodised aluminium profile. Handle-rails and spacers to be used for compositions WITHOUT HANDLE only.
PLINTH HEIGHT: 210 mm (for base units H 660 and tall units H 2000 mm) - 80 mm (for base units H 790 and tall units H 2130 mm).
FINISHES: Stainless steel - Matt white, matt black, bright white Lamicolor® 754 painted.
Handle
Each front panel, of composition WITH HANDLE, should have an handle to be chosen from the range, with or without price increase (Aprile handle excluded).ATTENTION !!! – Base unit doors with NO HANDLE can be supplied, upon request and free of charge, with the push opening system TIP-ON. SINGLE PULL-OUTDOORS
O N - O F F S TTECHNICAL FEATURES
require the SERVO-DRIVE system, to be ordered separately.
Self-standing structure and internal equipment
SELF-STANDING STRUCTURE WIDTH: 1800 mm (3 base units W. 600 mm) - 2400 mm (4 base units W.600 mm) - 3000 mm (5 base units W. 600 mm).
FINISHES OF BACK PANELS - INTERNAL LATERAL PANELS: Lasermat - Silcover - Ecolak - Wood - Wood Selection - Metals - Corian® - Stainless steel (it’s better to avoid Silcover, Ecolak, Wood and Wood Selection finishes when hob is used).
UPPER INTERNAL PANEL FINISHES: Lasermat - Silcover - Ecolak - Wood - Wood Selection - Metals - Stainless steel.
FINISHES OF BOX SECTION SHELVES - KIT OF CHIMNEY COVERINGS: Lasermat - Silcover - Ecolak - Wood - Wood Selection - Metals - Stainless steel.
FINISHES OF OPEN-FACED UNITS POSITIONED ON SHELF: Lasermat - Silcover - Ecolak - Wood - Wood Selection - Metals.
FINISHES OF SUSPENDED OVEN COMPARTMENT: stainless steel.
Worktops
Each self-standing structure should be completed with standard worktops P 630 mm, to be chosen among all finishes listed on price list.
THICKNESS: 12 - 20 mm.DEPTH: 630 mm.WIDTH: 1691 mm (3 base units W. 600 mm) - 2291 mm (4 base units W. 600 mm) - 2891 mm (5 base units W. 600 mm).
FINISHES: complete Boffi range (th. 12 or 20 mm only).
Without handle
With handle
13501/2016
L = WidthP = DepthH = HeightPr = Price code
2400 (L)
2291 (L1)
2294
1630
370 360
≥ 100 !!!
900
60061
53
265560
1,5
15 15
2430
28 25 14
1
531,5
12 / 20
53
1,5
L1 = L - 109 mm
2400 (L)
2294
2291
370 3601561
53
15
1,5
53
15
1,5
2430
≥ 100 !!!
265560
531,5
12 / 20
28 25 14
1
L1 = L - 109 mm
2291 (L1)
800 605
1405
800 605
1405
210
225421802050225421802050
80
O N - O F F S TTECHNICAL FEATURES
Dimensions.
Dimensions with folding doors open.
Internal dimensions of self-standing structure with folding door (example of a composition with 4 modules - L 2400 mm - with suspended oven).
Internal dimensions of self-standing structure with folding door (example of a composition with 4 modules - L 2400 mm).
136 01/2016
L = WidthP = DepthH = HeightPr = Price code
O N - O F F S TNOTES TO DESIGNER
Version WITHOUT HANDLE - Use of handle-rail and vertical spacers.
A1 A2
B1 B2
Vertical spacers cannot be used:
• between self-standing structure with folding door and finished end panel (see example A2 and B2).
• between tall unit with side-recessing door (on side where the door recesses) and finished end panel (see example B2).
13701/2016
L = WidthP = DepthH = HeightPr = Price code
O N - O F F S TNOTES TO DESIGNER
Version WITHOUT HANDLE- Use of vertical spacers when large refrigerators at the end of composition are used.Rules for niche compositions.
L 150150
≤ 600800
2254
150
2404
21080
2254
C1 C2
30
5523
5523
SDAJBQ26SDAVBQ26
Composition with lateral large refrigerators (Gaggenau Vario - Miele Master Cool - etc).
• Please refer ALWAYS to technical spec of electrical appliance to decide if you need to use the spacer cod. SDAJBQ26 / SDAVBQ26 (see example C2) for avoiding interferences with the finished side panel (see example C1).
Rules for niche compositions.
138 01/2016
L = WidthP = DepthH = HeightPr = Price code
O N - O F F S TNOTES TO DESIGNER
Technical connection diagram.
400
80
CONTROLBOX
UPS
C
A B
400
400
210
CONTROLBOX
UPS
C
C
A
A
B
B
180
Example of a composition with plinth H 80 mm.
Example of a composition with plinth H 210 mm.
Water discharge unit.
400 mm.
Cold water feeder.
450 mm.
Warm water feeder.
150 ÷ 200 mm.
Walled box with electrical socket 16 A.
Walled box to supply the electrical board (Control Box) fitted with the kitchen: set the outlet cable (min. 4 boards) with single terminals to protect the 32 A (Europe) / 64 A (USA) network.
ATTENTION !!! – The sizes are indicative and can change according to sink, siphons used or possible obstacles related to the place where the kitchen is installed.
CONTROL BOX: control board for all electrical functions of the self-standing structure.
UPS: uninterruptible power supply - for folding door opening/closing in case of absence of power supply.
13901/2016
L = WidthP = DepthH = HeightPr = Price code
Kitchen composed by cooking and washing unit in stainless steel (fixed size: 2400), which can be completed with a table.
Cooking and washing unit: made of stainless steel, with supporting structure in tubular and stainless steel sheet, with transparent wired glass shelf.
Table: structure made of tubular stainless steel with lower shelves in transparent wired glass and top in solid wood.
ATTENTION!: only the items indicated as OUTDOOR are suitable for external use (intended to be sheltered from the weather).
O P E NTECHNICAL FEATURES Kitchen composed by cooking and washing unit in stainless steel.
Examples of straight table positioning.
Examples of perpendicular table positioning.
140 01/2016
L = WidthP = DepthH = HeightPr = Price code
O P E N OUTDOOR = Elements suitable for outdoor (intended to be sheltered from the weather) or indoor use. Stainless steel parts in AISI 316. ATTENTION! : Boffi is not liable for any installation of electrical appliances outdoor. Please refer always to information and technical specifications of the manufacturer. All hobs Design Boffi ARE NOT suitable for external use.
Cooking and washing unit. • Made of matt satin stainless steel, 510 x 510 x 200 mm welded sink, removable chopping board in solid Iroko wood, 2 LEGRABOX drawers with “tip-on“ push-opening.
• Please order separately the hob (if WELDED only matt satin stainless steel, R or APRILE series - indoor use only), conforming to the cut-out indications on draw-ing (i.e. traces).
• Please add the hob cut-out cod. ZNAB01 (for top-mounted or semi-flush-mount-ed built-in hob) or cod. ZNAB02 (for flush-mounted built-in hob), any automatic strainer waste cod. ALER01*-ALES01*, tap cut-outs cod. ZNAB07 (this cut-out can be used for any automatic strainer waste and frontal hob knobs too), the syphon kit cod. ALEN001-ALEN002.
• ATTENTION !!!: all hobs Design Boffi ARE NOT suitable for external use.• Drawn=right (D), mirrored=left (S).
755
3442400
1100
130
600
700
L P H
OUTDOOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400 755 930 UOBH01
Supporting structure for cooking and washing unit. • Structure made of tubes and matt satin stainless steel profiles with transparent wired glass shelf, under-sink compartment with sides in stainless steel sheet.
• The under-sink compartment can be fitted with the trolley cod. GVCG01, to be ordered separately.
• In case of adjacent dishwasher, please use the specific structure with cut-out for dishwasher drain hoses.
• Drawn=right (D), mirrored=left (S).
755
586
2400
1700
700
110
L P H
A - Wall-mounted composition - OUTDOOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400 755 586 UOBJ01B - Wall-mounted composition, arranged for dishwasher use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400 755 586 UOBJ02C - Island composition- OUTDOOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400 755 586 UOBJ03D - Island composition, arranged for dishwasher use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400 755 586 UOBJ04
A B DC
14101/2016
L = WidthP = DepthH = HeightPr = Price code
O P E N OUTDOOR = Elements suitable for outdoor (intended to be sheltered from the weather) or indoor use. Stainless steel parts in AISI 316. ATTENTION! : Boffi is not liable for any installation of electrical appliances outdoor. Please refer always to information and technical specifications of the manufacturer. All hobs Design Boffi ARE NOT suitable for external use.
Worktop in solid wood. • Finishes: Iroko (OUTDOOR) - ”Olivato” ash wood - Canaletto LIGHT walnut “sawn-effect“.
• L max 2400 mm.• Price per linear metre.• In outdoor compositions the table should be slightly spaced from the cooking and
washing unit, to allow the protective cover use (recommended).
755 / 1100
max 2400
L P H
P 755 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 755 60 UOBK01P 1100 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 1100 60 UOBK02
Structure for worktop. • Made of tubes and matt satin stainless steel profiles with 2 transparent wired glass shelves.
• L min 900 mm / max 1800 mm. On the order please specify the desired measure-ment.
• Unit price.
min 900 / max 1800
L P H
L = min 900 / max 1200 mm - OUTDOOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 755 870 UOBL01L = min 1201 / max 1500 mm - OUTDOOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 755 870 UOBL02L = min 1501 / max 1800 mm - OUTDOOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 755 870 UOBL03
142 01/2016
L = WidthP = DepthH = HeightPr = Price code
Under-sink trolley. • Structure made of tubular matt satin stainless steel, composed by 3 upper and 7 lower compartments in solid Iroko wood, 4 castor wheels (2 with brakes).
• It can be placed inside the under-sink compartment.500500
555
L P H
OUTDOOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 500 555 GVCI01
Compartment + door for dishwasher. • In stainless steel.• GRIP handle in stainless steel.• Cut-out on side panel for connections.• Drawn=left (S), mirrored=right (D).
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 644 753 870 ABFW001
O P E N OUTDOOR = Elements suitable for outdoor (intended to be sheltered from the weather) or indoor use. Stainless steel parts in AISI 316. ATTENTION! : Boffi is not liable for any installation of electrical appliances outdoor. Please refer always to information and technical specifications of the manufacturer. All hobs Design Boffi ARE NOT suitable for external use.
Protective outdoor cover. • Made of marine technical textile.• It’s recommended to cover and protect the cooking/washing unit or the table,
when used outdoor. If cooking/washing unit and table are used together please leave a small distance between the two elements to allow the proper fit of the 2 protective covers.
• Version for cooking and washing unit: with specific integrated cover for tap.• Version for table: on the order please specify the table measurement.• Unit price.• Drawn=right (D), mirrored=left (S).
L P H
For cooking and washing unit - OUTDOOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400 755 930 AVNK001For table - OUTDOOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 930 AVNK002
14301/2016
L = WidthP = DepthH = HeightPr = Price code
M A D I A Equipped unit with double hinged door. CUSTOMISATIONS ARE NOT AVAILABLE. The ”old” solid pinewood can be, over time, altered (cracks and possible retractions of the same slats due to temperature and humidity change), result of possible wood natural change caused by time. The above mentioned characteristics shall not be considered cause of complaint.
MADIA • Frontal and external panels in solid grey ”old” pinewood.• Carcass: melamine-coated, grey-graphite oak.• Internal lighting: LED bar - Absorbtion: 36 W - Voltage: 100÷240 V / 50÷60 Hz -
Colour temperature: 2700 K.• Internal covering of back panel: mirrored glass.• Shelves L 1800 mm: extralight glass. Flexible or removable ONLY during the as-
sembly.• Internal drawers: Legrabox with front panels in burnished metal (useful sizes: P
473 / L 816 mm), compatible with internal accessories for units P 625 / L 900 mm.• Basement, internal frame and drawer front panels in tubular and/or metal sheet,
painted with epoxy dusts, bronzed coloured.• Door lock in burnished metal.• Adjustable hinges design Boffi in burnished metal. 180° opening.• Integrated device for automatic on/off switch of the lamp.• Island version: P 705 mm (please order separately the rear panels set).
1903
1635
1800
100
3780
68520
OPTIONALOPTIONAL
L P H
Wall version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1903 685 1800 FGEMD19NSet of rear panels, for island version.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1903 20 1800 SMAYDM01
144 01/2016
L = WidthP = DepthH = HeightPr = Price code
M I N I K I T C H E N TECHNICAL DETAILS
12
3
5
14
9
1
4
2
8
11
62
1071+535
max 2096 max 1150
650
107
979
810
7
10
6
13
+490 +500
• 1. Structure on castor wheels • 2. Pull-out top • 3. Tray on cooking plate • 4. Chopping board in Iroko wood (Teak until the stock lasts) • 5. Sliding flap • 6. Pot-holder wih sliding door in painted aluminium • 7. Sliding flap with main switch + sockets for small electrical appliances • 8. Handle • 9. Storage pull-out drawer• 10. Cutlery drawers• 11. Refrigerator, 60 litres• 12. Electrical cooking plate (to be chosen among the recommended models)• 13. Unit with door and shelf• 14. Open-faced unit for bottles
14501/2016
L = WidthP = DepthH = HeightPr = Price code
M I N I K I T C H E N O U T D O O R The Minikitchen is a re-edition of Joe Colombo’s celebrated 1963 design, proposed now with materials SUITABLE FOR OUTDOOR USE in a sheltered environ-ment. Boffi is not liable for any material deterioration if the product is not installed following the indicated instructions.
1
2
3
5
8
7
4
6
810
96
906
66
972
6022
445
1049
84.7 480.6 84.7130
320
230
400 520
1050
972
650
1090
40
220
256
9.3
216
.796
561
906
6611
9
10
• 1. Structure on castor wheels • 2. Tray on cooking plate • 3. Chopping board in Iroko wood (Teak until the stock lasts) • 4. Electrical cooking plate (to be chosen among the recommended models) • 5. Handle • 6. Open-faced unit • 7. Storage pull-out drawer • 8. Refrigerator 60 litres • 9. Compartment with door + 1 internal drawer• 10. Pull-out drawer• 11. Sliding flap for sockets and main switch
146 01/2016
L = WidthP = DepthH = HeightPr = Price code
LAMINATE
LASERMAT
VENEER WOOD
SOLID WOOD
SOLID WOOD STAVES
GLASS
POLISHED STAINLESS STEEL / MATT
40-60 mm.
cdba
40-60 mm.
cdba
Laminate, wooden edge
Laminate with aluminium profile
a HPL laminate, th. 0,9 mm.b Back-overlaying laminate.c Wood edge, th. 1 mm.d Panel made of wood particle boards, low formalde-
hyde emission (class E1), waterproof (class V100).
ATTENTION ! - Edge not feasible in Wood Selection.
a HPL laminate, th. 0,9 mm.b Back-overlaying laminate.c Edge in naturally anodised aluminium profile.d Panel made of wood particle boards, low formalde-
hyde emission (class E1), waterproof (class V100).
bca a
40-60 mm
bca a
12-20-40 mm
Lasermat with laser welded edge
Lasermat with profile in aluminium, stain-less steel finish
a 0,9 mm thick Lasermat nanotechnological material layer.
b Edge in polypropylene, welded with Laser technique.c Panel made of wood particle boards, low formalde-
hyde emission (class E1), waterproof (class V100).
a 0,9 mm thick Lasermat nanotechnological material layer.
b Edge in anodised aluminium profile, stainless steel finish.
c Panel made of wood particle boards, low formalde-hyde emission (class E1), waterproof (class V100).
a
b
c
12 mm
Extralight glass, frosted and painted
a Tempered glass, th. 12 mm.b Painted bottom.c Frosted surface.
Grinded corners.Satin edges.
20-40-60 mm.
c b da e
a 0,6+0,6 mm. double-layer wood veneer.b 0,6+0,6 mm. double wood veneer plating.c Wood edge, th. 1 mm.d Panel made of wood particle boards, low formalde-
hyde emission (class E1), waterproof (class V100).e Finished with natural polyurethane or acrylic base
paints, either as a primer or as final finish layer.
40-60 mm
110-190 mm
a
a
b
b
c
c
a Solid wood layers with staves effect, th. 5 mm.b Finished with matt transparent water-based paints,
either as a primer or as final finish layer.c Structure made of panels in poplar multi-layer wood.
ATTENTION ! - Tone matching is not guaranteed for adjacent veneered parts in the same specie.
a Solid wood layers, th. 5 mm.b Finished with matt transparent water-based paints,
either as a primer or as final finish layer.c Structure made of panels in poplar multi-layer wood.
ATTENTION ! - Tone matching is not guaranteed for adjacent veneered parts in the same specie.
cba
cba
110-190 mm
40-60 mmWith rounded edges
a AISI 304 stainless steel sheet, th. 1 mm.b Polished / matt finish.c Structure made of compounded aluminium.
a b c
12 mm.
2 x 45°
Square-edged
a Box section AISI 304 stainless steel, th. 1 mm.b Polished / matt finish.c Panel made of wood particle boards, low formalde-
hyde emission (class E1), waterproof (class V100).d Structure made of compounded aluminium.e Wood framework (only on 60-110-190 mm thick
worktops).
40 mm
a b c
c
60-110-190 mm
a b e
20 mm
a b cd
W o r k t o p s TECHNICAL FEATURES
IMPORTANT ! - In case of kitchen orders without worktops (supplied by the customer), please add always a price increase in terms of fixed amount per linear metre.
14701/2016
L = WidthP = DepthH = HeightPr = Price code
40-60-80 mm.
acb
ab c
20 mm.
C.R.S. SCOTCH BRITE STAINLESS STEEL
CORIAN®
STONE / MARBLE / GRANITE COMPOSITE
With rounded edges
a AISI 304 stainless steel sheet, th. 1 mm.b C.R.S. Scotch Brite finish.c Structure made of compounded aluminium.
a b c
12 mm.
2 x 45°
Square-edged
a AISI 304 stainless steel sheet, th. 1 mm.b C.R.S. Scotch Brite finish.c Structure made of compounded aluminium. d Slat in solid wood.e White melamine-coated panel made of wood parti-
cle boards, low formaldehyde emission (class E1), waterproof (class V100).
a b c d
e
110-190 mm.
a b c
20 mm.
a b c d
40-60 mm.
a White Corian®, th. 12 mm.
a12 mm.
a White Corian® , th. 6 mm.b White Corian®, th. 12 mm.c Structure made of compounded aluminium.
ab c e d
40-60110-190 mm.
a White Corian® , th. 6 mm.b White Corian®, min. th. 12 mm.c Structure made of compounded aluminium.d Slat made of wood particle boards, low formaldehyde
emission (class E1), waterproof (class V100).e White melamine-coated panel made of wood parti-
cle boards, low formaldehyde emission (class E1), waterproof (class V100).
Marble - Stone - Granite.
20 mm.
40-60-80110-190 mm.
40-60-80110-190 mm.
ab
acb
acb
a Marble, stone, granite.b Matt smooth, with waterproof and dirt-repellent treat-
ment.c Structure in thermosetting polymer polyurethane foam
(light, stable over time, waterproof and resistant to thermal shock). For thicknesses 110-190 mm a lower wooden frame on the perimeter is being provided.
Wall-mounted or island worktop, with basin effect. Upon request, without extra charge.
Silestone® - Dekton®
a Composite Silestone®, composite Dekton®.b Matt smooth, with waterproof and dirt-repellent treat-
ment.c Structure in thermosetting polymer polyurethane foam
(light, stable over time, waterproof and resistant to thermal shock). For thicknesses 110-190 mm a lower wooden frame on the perimeter is being provided.
W o r k t o p s TECHNICAL FEATURES
IMPORTANT ! - In case of kitchen orders without worktops (supplied by the customer), please add always a price increase in terms of fixed amount per linear metre.
DURINOX®
a Durinox® sheet, th. 1 mm.b Micro-sandblasted finish.c Panel made of wood particle boards, low formalde-
hyde emission (class E1), waterproof (class V100).
r=1 c
12-20-40 mm
a b
20 mm.
40-60-80110-190 mm.
40-60-80110-190 mm.
ab
acb
acb
148 01/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 340x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 450 mm.
340
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 400 200 LETBAA01
W o r k t o p s POLISHED STAINLESS STEEL - Welded sinks, QUADRO series Compatible ONLY with worktops in polished stainless steel, min. 630 mm deep. The price includes the welding on worktop. Square-edged sink - Bottom with draining folds and a 9 mm radius on lower corners. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter).
Sink 400x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 450 mm.
400
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 200 LETBAA02
Sink 500x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 600 mm.
500
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 400 200 LETBAA03
Sink 760x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 900 mm.
760
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760 400 200 LETBAG01
14901/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 340x400 mm. • Single sink H 195 mm.• Under-sink base unit min. L 450 mm.
340
400
r= 15
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 400 195 LETDAA01
W o r k t o p s POLISHED STAINLESS STEEL - Welded sinks, R series Compatible ONLY with worktops in polished stainless steel, min. 630 mm deep. The price includes the welding on worktop. Rounded-edges sink, radius of 15 mm - Smooth bottom. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter).
Sink 400x400 mm. • Single sink H 195 mm.• Under-sink base unit min. L 450 mm.
400
400
r= 15
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 195 LETDAA02
Sink 450X400 mm. • Single sink H 195 mm.• Under-sink base unit min. L 600 mm.
450
400
r= 15
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 400 195 LETDAA03
Sink 710x400 mm. • Single sink H 195 mm.• Under-sink base unit min. L 900 mm.
710
400
r= 15
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 710 400 195 LETDAG01
150 01/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 820x400 mm. • Double sink (400x400 + 340x400) H 195 mm.• Under-sink base unit min. L 900 mm.• Drawn=left (S), mirrored=right (D).
340400820
80
400
r= 15 r= 15
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 820 400 195 LETDAF01
W o r k t o p s POLISHED STAINLESS STEEL - Welded sinks, R series Compatible ONLY with worktops in polished stainless steel, min. 630 mm deep. The price includes the welding on worktop. Rounded-edges sink, radius of 15 mm - Smooth bottom. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter).
Sink 980x400 mm. • Double sink (450x400 + 450x400) H 195 mm.• Under-sink base unit min. L 1200 mm.• Drawn=left (S), mirrored=right (D).
450450980
80
400
r= 15 r= 15
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 980 400 195 LETDAC01
15101/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 340x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 450 mm.
340
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 400 200 LETCAA01
W o r k t o p s MATT SATIN STAINLESS STEEL - Welded sinks, QUADRO series Compatible ONLY with worktops in matt satin stainless steel, min. 630 mm deep. The price includes the welding on worktop. Square-edged sink - Bottom with draining folds and a 9 mm radius on lower corners. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter).
Sink 400x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 450 mm.
400
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 200 LETCAA02
Sink 500x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 600 mm.
500
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 400 200 LETCAA03
Sink 760x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 900 mm.
760
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760 400 200 LETCAG01
152 01/2016
L = WidthP = DepthH = HeightPr = Price code
Hob - 4 burners (art. 930715264 DB). • Burners power: (1) 3000 W - (2-4) 1750 W - (3) 1100 W.
1 2
3 4
460
460
65
125L P H
Control knobs on top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 585 460 65 VFRACI03Frontal control knobs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 460 460 65 VFRBLI03
Hob - 5 burners (art. 930715268 DB). • Burners power: (1) 3800 W triple rim - (2) 3000 W - (3) 1100 W - (4-5) 1750 W.
2 4
31 5
760
460
65
125L P H
Control knobs on top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 885 460 65 VFRACI04Frontal control knobs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760 460 65 VFRBLI04
Hob - 4 burners (art. 930715256 DB). • Burners power: (1) 3000 W - (2) 1750 W + (3) 3800 W triple rim - (4) 1100 W.• Additional frontal grids.
1 2 3 4
701021
419
125
L P H
Control knobs on top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1146 419 70 VFRBHI03
W o r k t o p s POLISHED STAINLESS STEEL - Welded hobs, R series Compatible ONLY with worktops in polished stainless steel, min. 630 mm deep. Default settings for METHANE GAS. Optional nozzles kit for LPG gas (LIQUID GAS) is included. Please check always with Boffi the options for other gas typologies. The price includes the welding on worktop. QUADRO series knobs in satin chromium-plated. Grids in enamelled cast-iron, safety valves, electronic ignition. Versions with frontal knobs are compatible ONLY with 110 and 190 mm thick worktops.
15301/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 760x400 mm. • Double sink (340x400 + 340x400) H 200 mm.• Under-sink base unit min. L 900 mm.
340
400
340 80760
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760 400 200 LETCAC01
W o r k t o p s MATT SATIN STAINLESS STEEL - Welded sinks, QUADRO series Compatible ONLY with worktops in matt satin stainless steel, min. 630 mm deep. The price includes the welding on worktop. Square-edged sink - Bottom with draining folds and a 9 mm radius on lower corners. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter).
Sink 820x400 mm. • Double sink (400x400 + 340x400) H 200 mm.• Under-sink base unit min. L 900 mm.• Drawn=left (S), mirrored=right (D).
340
400
400 80820
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 820 400 200 LETCAF01
Sink 920x400 mm. • Double sink (500x400 + 340x400) H 200 mm.• Under-sink base unit min. L 1050 mm.• Drawn=left (S), mirrored=right (D).
340
400
500 80920
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 920 400 200 LETCAF02
Welded dustbin for worktop. • Ø external 275 mm.• Plastic bucket, 13 l.-capacity with lid in stainless steel.
Ø 275
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275 275 - LEBJAN03
154 01/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 760x400 mm. • Double sink (340x400 + 340x400) H 200 mm.• Under-sink base unit min. L 900 mm.
340
400
340 80760
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760 400 200 LETBAC01
W o r k t o p s POLISHED STAINLESS STEEL - Welded sinks, QUADRO series Compatible ONLY with worktops in polished stainless steel, min. 630 mm deep. The price includes the welding on worktop. Square-edged sink - Bottom with draining folds and a 9 mm radius on lower corners. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter).
Sink 820x400 mm. • Double sink (400x400 + 340x400) H 200 mm.• Under-sink base unit min. L 900 mm.• Drawn=left (S), mirrored=right (D).
340
400
400 80820
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 820 400 200 LETBAF01
Sink 920x400 mm. • Double sink (500x400 + 340x400) H 200 mm.• Under-sink base unit min. L 1050 mm.• Drawn=left (S), mirrored=right (D).
340
400
500 80920
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 920 400 200 LETBAF02
Welded dustbin for worktop. • Ø external 275 mm.• Plastic bucket, 13 l.-capacity with lid in stainless steel.
Ø 275
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275 275 - LEBJAN02
15501/2016
L = WidthP = DepthH = HeightPr = Price code
Hob - 4 burners (art. 930715264 DB). • Burners power: (1) 3000 W - (2-4) 1750 W - (3) 1100 W.
1 2
3 4
460
460
65
125L P H
Control knobs on top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 585 460 65 VFRACS03Frontal control knobs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 460 460 65 VFRBLS03
Hob - 5 burners (art. 930715268 DB). • Burners power: (1) 3800 W triple rim - (2) 3000 W - (3) 1100 W - (4-5) 1750 W.
2 4
31 5
760
460
65
125L P H
Control knobs on top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 885 460 65 VFRACS04Frontal control knobs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760 460 65 VFRBLS04
Hob - 4 burners (art. 930715256 DB). • Burners power: (1) 3000 W - (2) 1750 W + (3) 3800 W triple rim - (4) 1100 W.• Additional frontal grids.
1 2 3 4
701021
419
125
L P H
Control knobs on top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1146 419 70 VFRBHS03
W o r k t o p s MATT SATIN STAINLESS STEEL - Welded hobs, R series Compatible ONLY with worktops in matt satin stainless steel, min. 630 mm deep. Default settings for METHANE GAS. Optional nozzles kit for LPG gas (LIQUID GAS) is included. Please check always with Boffi the options for other gas typologies. The price includes the welding on worktop. Knobs: C.R.S. stainless steel series. Grids in enamelled cast-iron, safety valves, electronic ignition. Versions with frontal knobs are compatible ONLY with 110 and 190 mm thick worktops.
156 01/2016
L = WidthP = DepthH = HeightPr = Price code
Hob - 4 burners. • Burners power: 1 x 3000 W rapid - 1 x 1000 W auxiliary - 2 x 1750 W semirapid.
470 125
524
40 4080
L P H
Control knobs on top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 595 524 80 VAFACI06Frontal control knobs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470 524 80 VAFBLI03
Hob - 5 burners. • Burners power: 1 x 300/4200 W indipendent triple rim - 1 x 3000 W rapid - 1 x 1000 W auxiliary - 2 x 1750 W semirapid.
753 125
524
40 4080
L P H
Control knobs on top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 878 524 80 VAFACI07Frontal control knobs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 753 524 80 VAFBLI04
W o r k t o p s MATT SATIN STAINLESS STEEL - Welded hobs, APRILE series Compatible ONLY with worktops in matt satin stainless steel, min. 630 mm deep. Default settings for METHANE GAS. Optional nozzles kit for LPG gas (LIQUID GAS) is included. Please check always with Boffi the options for other gas typologies. The price includes the welding on worktop. Knobs: C.R.S. stainless steel series. Grids in enamelled cast-iron, safety valves, electronic ignition, voltage 220 V - 50 Hz. Versions with frontal knobs are compatible ONLY with 110 and 190 mm thick worktops. For installation on Aprile worktops please see the Aprile chapter.
15701/2016
L = WidthP = DepthH = HeightPr = Price code
W o r k t o p s MATT SATIN STAINLESS STEEL - Welded insets (sink+hob) Compatible ONLY with worktops in matt satin stainless steel min. 60 mm thick and min. 630 mm deep. The price includes the sink, the hob and the relative welding process on top. Customisations are not available: positioning of sink, hob and control knobs cannot be changed. Hob knobs: C.R.S stainless steel series. Please order separately the worktop, tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter). Compatible with countertop-mounted accessories for Aprile inset. Default settings for METHANE GAS. Optional nozzles kit for LPG gas (LIQUID GAS) is included. Please check always with Boffi the options for other gas typologies.
Welded inset including sink and 4 gas burners. • L 1747 mm.• Height difference with worktop surface = - 40 mm.• Sink 500 x 400 x 200 mm cod. LETCAA03.• Hob cod. VAFACI06.
1622
1747
125 40 4080
40 200240
524
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1747 524 240 UBA401
Welded inset including sink and 5 gas burners. • L 2347 mm.• Height difference with worktop surface = - 40 mm.• Sink 760 x 400 x 200 mm cod. LETCAG01.• Hob cod. VAFACI07.
2222
2347
125 40 4080
40 200240
524
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2347 524 240 UBA402
158 01/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 400x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 450 mm.
400
400
r = 60
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 200 LESIAA10
Sink 850x400 mm. • Double sink (400x400 + 400x400) H 200 mm.• Under-sink base unit min. L 900 mm.
400 50 400850
400
r = 60 r = 60
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 850 400 200 LESIAC02
W o r k t o p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Welded sinks, C.R.S. series Compatible ONLY with worktops in C.R.S. Scotch Brite stainless steel, min. 630 mm deep. The price includes the welding on worktop. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter).
Sink 342x410 mm. • Single sink H 165 mm.• Under-sink base unit min. L 450 mm.
342
410
r = 75
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 410 165 LESIAA11
Sink 500x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 600 mm.• Drawn=right (D), mirrored=left (S).
500
400
r = 100
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 400 200 LESIAA12
15901/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 800x510 mm. • Single sink H 190 mm.• Draining lines on bottom.• Under-sink base unit min. L 900 mm.• Drawn=left (S), mirrored=right (D).
800
510
r = 10
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 510 190 LESIAG01
Welded dustbin for worktop. • Ø external 275 mm.• Plastic bucket, 13 l.-capacity with lid in stainless steel.
Ø 275
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275 275 - LESIAN01
Sink 1050x400 mm. • Double sink (500x400 + 500x400) H 200 mm.• Under-sink base unit min. L 1200 mm.
1050
50500
400
r = 100
500
r = 100
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050 400 200 LESIAC03
W o r k t o p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Welded sinks, C.R.S. series Compatible ONLY with worktops in C.R.S. Scotch Brite stainless steel, min. 630 mm deep. The price includes the welding on worktop. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter).
160 01/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 270x400 mm. • Single sink H 190 mm.• Under-sink base unit min. L 450 mm.
270
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 400 190 LESPAA01
W o r k t o p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Welded sinks, C.R.S. series Compatible ONLY with worktops in C.R.S. Scotch Brite stainless steel, min. 630 mm deep. The price includes the welding on worktop. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter). In the sinks with sharp corners a small retention of water could remain on the bottom. It could be wiped with a sponge. The above shall not be con-sidered cause of complaint or disputes. How to position sinks on worktops: 1) min. distance between bowl and front worktop trim: 60 mm. 2) min. distance between bowl and side worktop trim: 50 mm. 3) min. distance between 2 bowls: 50 mm. 4) min. distance between bowl and back worktop trim with 20 mm back-splash: 80 mm.
Sink 400x400 mm. • Single sink H 190 mm.• Under-sink base unit min. L 600 mm.
400
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 190 LESPAA02
Sink 770x400 mm. • Double sink (400x400 + 270x400) H 190 mm.• Under-sink base unit min. L 900 mm.
400770
400
100 270
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 770 400 190 LESPAF01
Sink 770x400 mm. • Single sink (400x400) H 190 mm + countertop waste chute Ø 275 mm.• Under-sink base unit min. L 900 mm.
400770
400
205 165
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 770 400 190 LESPAM01
16101/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 900x400 mm. • Double sink (400x400 + 400x400) H 190 mm.• Under-sink base unit min. L 1050 mm.
900
400
400 100 400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 400 190 LESPAC01
W o r k t o p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Welded sinks, C.R.S. series Compatible ONLY with worktops in C.R.S. Scotch Brite stainless steel, min. 630 mm deep. The price includes the welding on worktop. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter). In the sinks with sharp corners a small retention of water could remain on the bottom. It could be wiped with a sponge. The above shall not be con-sidered cause of complaint or disputes. How to position sinks on worktops: 1) min. distance between bowl and front worktop trim: 60 mm. 2) min. distance between bowl and side worktop trim: 50 mm. 3) min. distance between 2 bowls: 50 mm. 4) min. distance between bowl and back worktop trim with 20 mm back-splash: 80 mm.
Sink 810x400 mm. • Single sink H 200 mm.• For rear tap positioning, under-sink base unit min. L 900 mm.• For lateral tap positioning, under-sink base unit min. L 1200 mm.
810L= 900
400
810L= 1050
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 810 400 200 LESPAG02
162 01/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 270x510 mm. • Single sink H 190 mm.• Under-sink base unit min. L 450 mm.
270
510
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 510 190 LESPAA13
W o r k t o p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Welded sinks, C.R.S. series Compatible ONLY with worktops in C.R.S. Scotch Brite stainless steel, min. 700 mm deep. The price includes the welding on worktop. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter). In the sinks with sharp corners a small retention of water could remain on the bottom. It could be wiped with a sponge. The above shall not be con-sidered cause of complaint or disputes. How to position sinks on worktops: 1) min. distance between bowl and front worktop trim: 60 mm. 2) min. distance between bowl and side worktop trim: 50 mm. 3) min. distance between 2 bowls: 50 mm. 4) min. distance between bowl and back worktop trim with 20 mm back-splash: 80 mm.
Sink 510x510 mm. • Single sink H 190 mm.• Under-sink base unit min. L 600 mm.
510
510
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 510 510 190 LESPAA14
Sink 880x510 mm. • Double sink (510x510 + 270x510) H 190 mm.• Under-sink base unit min. L 1050 mm.
510 100 270880
510
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 880 510 190 LESPAF05
Sink 1120x510 mm. • Double sink (510x510 + 510x510) H 190 mm.• Under-sink base unit min. L 1200 mm.
510 5101120
510
100
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1120 510 190 LESPAC04
16301/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 940x510 mm. • Single sink (510x510) H 190 mm + countertop waste chute Ø 275 mm.• Under-sink base unit min. L 900 mm.
510 215215940
510
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 940 510 190 LESPAM03
W o r k t o p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Welded sinks, C.R.S. series Compatible ONLY with worktops in C.R.S. Scotch Brite stainless steel, min. 700 mm deep. The price includes the welding on worktop. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter). In the sinks with sharp corners a small retention of water could remain on the bottom. It could be wiped with a sponge. The above shall not be con-sidered cause of complaint or disputes. How to position sinks on worktops: 1) min. distance between bowl and front worktop trim: 60 mm. 2) min. distance between bowl and side worktop trim: 50 mm. 3) min. distance between 2 bowls: 50 mm. 4) min. distance between bowl and back worktop trim with 20 mm back-splash: 80 mm.
Sink 810x510 mm. • Single sink H 190 mm.• For lateral tap positioning, under-sink base unit min. L 1050 mm.
810940
510
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 810 510 190 LESPAG03
164 01/2016
L = WidthP = DepthH = HeightPr = Price code
Hob - 4 burners. • Burners power: (1) 1000 W - (2-4) 1650 W - (3) 3000 W.
1
2
3
4
75540
510
125
L P H
Control knobs on top - (art. BB40/CS DB).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 665 510 75 VAIACI04Frontal control knobs - (art. BB40 DB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540 510 75 VAIBLI04
Hob - 5 burners. • Burners power: (1) 1000 W - (2-5) 1650 W - (3) 3250 W triple rim - (4) 3000 W.
1
2
4
5
3
75810
510
125
L P H
Control knobs on top - (art. BB40TC/CS DB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 935 510 75 VAIACI05Frontal control knobs - (art. BB40TC DB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 810 510 75 VAIBLI05
Hob - 6 burners. • Burners power: (1-2) 3250 W triple rim - (3) 3000 W - (4-6) 1650 W - (5) 1000 W.
3
4
5
6
1 2
751080
510
125
L P H
Control knobs on top - (art. BB402TC/CS DB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1205 510 75 VAIACI06Frontal control knobs - (art. BB402TC DB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1080 510 75 VAIBLI06
Hob - 4 burners. • Burners power: (1-3) 1650 W - (2-4) 3000 W.
1 2 3 4
841020
375
125
L P H
Control knobs on top - (art. BB40118/CS DB).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1145 375 84 VAIBHI01
W o r k t o p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Welded hobs, C.R.S. series Compatible ONLY with worktops in C.R.S. Scotch Brite stainless steel, min. 630 mm deep. Default settings for METHANE GAS. Optional nozzles kit for LPG gas (LIQUID GAS) is included. Please check always with Boffi the options for other gas typologies. The price includes the welding on worktop. Knobs: C.R.S. stainless steel series. Grids in enamelled cast-iron, safety valves, electronic ignition. Versions with frontal knobs are compatible ONLY with 110 and 190 mm thick worktops.
16501/2016
L = WidthP = DepthH = HeightPr = Price code
Induction cooking vessel (art. B MULTIPLO.1 DB). • 5 cooking programmes, 2 induction zones that can be used together or sepa-rately, 16 power levels, display for cooking methods, electronic timer, child lock function.
• Supplied accessories: 2 stainless steel cooking vessels, stainless steel lid, 2 glass lids, 2 stainless steel steam small baskets, 1 stainless steel small basket for pasta, 1 stainless steel small basket for fryer unit.
• Power: max 1400 W.• Under-hob base unit min. L 600 mm.
411
497,5
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411 498 - VAMACI01
W o r k t o p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Welded hobs, C.R.S. series Compatible ONLY with worktops in C.R.S. Scotch Brite stainless steel, min. 630 mm deep. Default settings for METHANE GAS. Optional nozzles kit for LPG gas (LIQUID GAS) is included. Please check always with Boffi the options for other gas typologies. The price includes the welding on worktop. Knobs: C.R.S. stainless steel series. Grids in enamelled cast-iron, safety valves, electronic ignition. Versions with frontal knobs are compatible ONLY with 110 and 190 mm thick worktops.
166 01/2016
L = WidthP = DepthH = HeightPr = Price code
W o r k t o p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Welded hobs, PLANAR series Please order the code for methane gas or liquefied petroleum gas (LPG), accordingly to the supply. Compatible ONLY with worktops in C.R.S. Scotch Brite stainless steel, min. 630 mm deep. The price includes the welding on worktop. Knobs: C.R.S. stainless steel series. “Planar Tecnology“ burners, grids in enamelled cast-iron, safety valves, electronic ignition.
Hob - 4 burners - (art. BB44P/CS DB). • Burners power: (1-2) 1900 W - (3) 1000 W - (4) 3000 W triple rim.
2 4
1 3
776
507
74
L P H
Control knobs on top - Methane gas.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 776 507 74 VPLACI01Control knobs on top - Liquefied Petroleum Gas (LPG). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 776 507 74 VPLACI04
Hob - 5 burners - (art. BB55P/CS DB). • Burners power: (1-4) 1000 W - (2-5) 1900 W - (3) 3000 W triple rim.
2 5
1 4
3
930
505
74
L P H
Control knobs on top - Methane gas.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 930 505 74 VPLACI02Control knobs on top - Liquefied Petroleum Gas (LPG). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 930 505 74 VPLACI05
Hob - 4 burners - (art. BB44P120/CS DB). • Burners power: (1) 1000 W - (2-4) 1900 W - (3) 3000 W triple rim.
321 4
1230
408
74
L P H
Control knobs on top - Methane gas.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1230 408 74 VPLACI03Control knobs on top - Liquefied Petroleum Gas (LPG). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1230 408 74 VPLACI06
16701/2016
L = WidthP = DepthH = HeightPr = Price code
W o r k t o p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Welded hobs, PLANAR series Please order the code for methane gas or liquefied petroleum gas (LPG), accordingly to the supply. Compatible ONLY with worktops in C.R.S. Scotch Brite stainless steel, min. 630 mm deep. The price includes the welding on worktop. Knobs: C.R.S. stainless steel series. “Planar Tecnology“ burners, grids in enamelled cast-iron, safety valves, electronic ignition.
Hob - 4 burners - (art. BB44P DB). • Burners power: (1-2) 1900 W - (3) 1000 W - (4) 3000 W triple rim.• Compatible ONLY with 110 and 190 mm thick worktops.
2 4
1 3
590
100819
L P H
Frontal control knobs - Methane gas.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 819 590 100 VPLBLI01Control knobs on top - Liquefied Petroleum Gas (LPG). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 819 590 100 VPLBLI04
Hob - 5 burners - (art. BB55P DB). • Burners power: (1-4) 1000 W - (2-5) 1900 W - (3) 3000 W triple rim.• Compatible ONLY with 110 and 190 mm thick worktops.
2 5
1 4
3 590
100870
L P H
Frontal control knobs - Methane gas.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 870 590 100 VPLBLI02Control knobs on top - Liquefied Petroleum Gas (LPG). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 870 590 100 VPLBLI05
Hob - 4 burners - (art. BB44P120 DB). • Burners power: (1) 1000 W - (2-4) 1900 W - (3) 3000 W triple rim.• Compatible ONLY with 110 and 190 mm thick worktops.
321 4
100
460
1215
L P H
Frontal control knobs - Methane gas.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1215 460 100 VPLBLI03Control knobs on top - Liquefied Petroleum Gas (LPG). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1215 460 100 VPLBLI06
168 01/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 340x400 mm. • Single sink H 175 mm.• Under-sink base unit min. L 450 mm.
340
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 400 175 LXDRAA01
W o r k t o p s DURINOX® - Welded sinks in Durinox® Compatible ONLY with worktops in Durinox®, min. 630 mm deep. The price includes the welding on worktop. Square-edged sink - Bottom with draining folds. Please order separately tap holes and the automatic strainer waste kit if necessary (Taps chapter). Included accessories: 3“ 1/2 basket waste-drain with plug in Durinox® (CapFlow) and siphon.
Sink 400x400 mm. • Single sink H 175 mm.• Under-sink base unit min. L 450 mm.
400
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 175 LXDRAA02
Sink 500x400 mm. • Single sink H 175 mm.• Under-sink base unit min. L 600 mm.
500
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 400 175 LXDRAA03
Sink 700x400 mm. • Single sink H 185 mm.• Under-sink base unit min. L 900 mm.
700
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 400 185 LXDRAG01
16901/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 760x400 mm. • Double sink (340x400 + 340x400) H 175 mm.• Under-sink base unit min. L 900 mm.
340
400
340 80
760
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760 400 175 LXDRAC01
W o r k t o p s DURINOX® - Welded sinks in Durinox® Compatible ONLY with worktops in Durinox®, min. 630 mm deep. The price includes the welding on worktop. Square-edged sink - Bottom with draining folds. Please order separately tap holes and the automatic strainer waste kit if necessary (Taps chapter). Included accessories: 3“ 1/2 basket waste-drain with plug in Durinox® (CapFlow) and siphon.
Sink 820x400 mm. • Double sink (400x400 + 340x400) H 175 mm.• Under-sink base unit min. L 900 mm.• Drawn=left (S), mirrored=right (D).
340
400
400 80
820
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 820 400 175 LXDRAC02
Sink 920x400 mm. • Double sink (500x400 + 340x400) H 175 mm.• Under-sink base unit min. L 1050 mm.• Drawn=left (S), mirrored=right (D).
340
400
500 80
920
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 920 400 175 LXDRAC03
Drainboard 550x400 mm. • Single sink H 18 mm.• 1“ 1/2 basket waste-drain without gasket, used as overflow.• Under-sink base unit min. L 600 mm.
550 18
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550 400 18 LXDRAA04
170 01/2016
L = WidthP = DepthH = HeightPr = Price code
Welded dustbin for worktop. • Ø external 275 mm.• Plastic bucket, 13 l.-capacity with lid in Durinox®.
Ø 275
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275 275 - LXDRAN01
W o r k t o p s DURINOX® - Welded sinks in Durinox® Compatible ONLY with worktops in Durinox®, min. 630 mm deep. The price includes the welding on worktop. Square-edged sink - Bottom with draining folds. Please order separately tap holes and the automatic strainer waste kit if necessary (Taps chapter). Included accessories: 3“ 1/2 basket waste-drain with plug in Durinox® (CapFlow) and siphon.
17101/2016
L = WidthP = DepthH = HeightPr = Price code
400x449 400x449
695x436
630
mm
130 70
400
100
100 100400
600 mm
100
R= 10400x400
Ø 35
630
mm
130 70
400
100
75 75400 100 400
1050 mm
100 100Ø 35
R= 10400x400
R= 10400x400
630
mm
130 70
400
100
100 100700
900 mm
100
700x400R= 10
Ø 35
152x297
440x340
440x340
531x397
630
mm
233
297
100
190
340
100
190
340
100
133
397
100
104100 440152104
900 mm
630
mm
131
399
100
76 76100 399399
1050 mm
705
mm
160
445
100
75 75100 400400
1050 mm
705
mm
169
436
100
102,5 102,5695
900 mm
70
126 126 Ø 35
630
mm
233
297
100
51 66100 531152
900 mm
70
126 126 Ø 35
630
mm
133
397
100
64,5 64,5100 440531
1200 mm
70
100 100 Ø 35
70
100 100Ø 35
399x399 399x399
70
100 100 Ø 35
70
100Ø 35
152x297
531x397
LCDTAA01
2 x LCDTAA01
LCDTAA02
630
mm
130 70
400
100
70 100 70330 330
900 mm
100100Ø 35
2 x LCDTAA09
LCDTAA03 + LCDTAA04 LCDTAA03 + LCDTAA05
LCDTAA05 + LCDTAA042 x LCDTAA06 2 x LCDTAA07
LCDTAA08
330x400R= 10
330x400R= 10
W o r k t o p s Corian® - Welded sinks (under-mounted, gluing with monolithic appearance). TECHNICAL DETAILS Compatible ONLY with worktops in Corian®. With back panels, some tap types or XILA compositions, small size changes are possible. Holes can be located in different positions than shown, except those interfering with the overflow.
172 01/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 400x400 mm. • Single sink H 176 mm.• Under-sink base unit min. L 600 mm.• X = overflow positioning.• Dupont article 965.
400451
400
451
147
R= 10
X
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 176 LCDTAA01
W o r k t o p s Corian® - Welded sinks (under-mounted, gluing with monolithic appearance). Compatible ONLY with worktops in Corian®, min. 630 mm deep. The price includes the gluing on top. The gluing zone between worktop and sink can slightly differ in colour in the connection point. This shall not be considered a cause of quality claim. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter). 3“ 1/2 strainer waste.
Sink 700x400 mm. • Single sink H 176 mm.• Under-sink base unit min. L 900 mm.• X = overflow positioning.• Dupont article 966.
700750
400
451
147
R= 10
X
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 400 176 LCDTAA02
Sink 152x297 mm. • Single small bowl H 141 mm.• X = overflow positioning.• Dupont article 857.
152202
297
348
==
X
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 297 141 LCDTAA03
Sink 330x400 mm. • Single sink H 175 mm.• Under-sink base unit min. L 450 mm.• X = overflow positioning.• Dupont article 969.
330381
400
451
147
R= 10
X
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 400 175 LCDTAA09
17301/2016
L = WidthP = DepthH = HeightPr = Price code
Sink 440x340 mm. • Single sink H 200 mm.• Under-sink base unit min. L 600 mm.• X = overflow positioning.• Dupont article 859.
440484
340
384
122
X
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440 340 200 LCDTAA04
Sink 531x397 mm. • Single sink H 188 mm.• Under-sink base unit min. L 900 mm.• X = overflow positioning.• Dupont article 871.
531582
397
448
223
X
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531 397 188 LCDTAA05
W o r k t o p s Corian® - Welded sinks (under-mounted, gluing with monolithic appearance). Compatible ONLY with worktops in Corian®, min. 630 mm deep. The price includes the gluing on top. The gluing zone between worktop and sink can slightly differ in colour in the connection point. This shall not be considered a cause of quality claim. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter). 3“ 1/2 strainer waste.
Sink 399x399 mm. • Single sink H 208 mm.• Under-sink base unit min. L 600 mm.• X = overflow positioning.• Dupont article 804.
399448
399
448
131
X
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399 399 208 LCDTAA06
Sink 400x449 mm. • Single sink H 208 mm.• Under-sink base unit min. L 600 mm.• Compatible ONLY with worktops in Corian®, min. 705 mm deep.• X = overflow positioning.• Dupont article 805.
400444
449
494
128
X
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 449 208 LCDTAA07
174 01/2016
L = WidthP = DepthH = HeightPr = Price code
Flush-mounted dustbin for worktop. • Ø external 313 mm.• Plastic bucket, 13 l.-capacity with lid in stainless steel, covered in Corian®.
Ø 313
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313 313 - LJBJAN01
W o r k t o p s Corian® - Welded sinks (under-mounted, gluing with monolithic appearance). Compatible ONLY with worktops in Corian®, min. 630 mm deep. The price includes the gluing on top. The gluing zone between worktop and sink can slightly differ in colour in the connection point. This shall not be considered a cause of quality claim. Please order separately tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter). 3“ 1/2 strainer waste.
Sink 695x436 mm. • Single sink H 214 mm.• Under-sink base unit min. L 900 mm.• Compatible ONLY with worktops in Corian®, min. 705 mm deep.• X = overflow positioning.• Dupont article 881.
695733
436
474
237
X
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 695 436 214 LCDTAA08
17501/2016
L = WidthP = DepthH = HeightPr = Price code
W o r k t o p s Corian® - Welded sink insets (gluing with monolithic appearance). Compatible ONLY with worktops in Corian® min. 60 mm thick and min. 630 mm deep (830 mm. deep if used with accessories/containers kit). The price includes the sink and the relative gluing on top (if requested and provided is included the flush-mounted dustbin price too). Customisations are not available: measures and positioning of sink cannot be changed. Please order separately the worktop, tap holes, waste-drain/siphon kit or automatic strainer waste kit if necessary (Taps chapter). Compatible with countertop-mounted accessories for Aprile inset.
Glued inset including sink. • Height difference with worktop surface = - 40 mm.• Sink 400 x 400 x 176 mm cod. LCDTAA01.• Drawn=right (D), mirrored=left (S).
1110 40 176 15231
524
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1110 524 231 UBA201
Glued inset including sink and flush-mounted countertop waste chute. • Height difference with worktop surface = - 40 mm.• Sink 400 x 400 x 176 mm cod. LCDTAA01.• Countertop waste chute with flush-mounted lid cod. LJBJAN01.• Drawn=right (D), mirrored=left (S).
1110 40 176 15231
524
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1110 524 231 UBA601
Glued inset including sink. • Height difference with worktop surface = - 40 mm.• Sink 760 x 400 x 176 mm cod. LCDTAA02.• Drawn=right (D), mirrored=left (S).
1110 40 176 15231
524
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1110 524 231 UBA202
176 01/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s MOUNTING TYPOLOGIES Technical chart for mounting typologies of sinks and hobs.
UNDER-MOUNTED
FLUSH-MOUNTED
SEMI-FLUSH-MOUNTED
17701/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s POLISHED STAINLESS STEEL - Sinks, QUADRO series UNDER-MOUNTED Compatible ONLY with worktops in Glass, Corian®, Stone, Marble, Granite, Composite, min. 630 mm deep. Square-edged sink with sharp corners - Bottom with draining folds. Please order separately the under-mounted cut-out, tap holes (Customised Solutions chapter) and the automatic strainer waste kit (Taps chapter).
Sink 340x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 450 mm.
340
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 400 200 LCTBAA01
Sink 400x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 450 mm.
400
400L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 200 LCTBAA02
Sink 500x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 600 mm.
500
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 400 200 LCTBAA03
Sink 760x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 900 mm.
400
760L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760 400 200 LCTBAG01
Design recommendations
120120120120120Ø 35 80
50
120
400
340
400
340
400
400
400
500
400
500
400
760
450 900 1200 900
178 01/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s MATT SATIN STAINLESS STEEL - Sinks, QUADRO series UNDER-MOUNTED Compatible ONLY with worktops in Glass, Corian®, Stone, Marble, Granite, Composite, min. 630 mm deep. Square-edged sink with sharp corners - Bottom with draining folds. Please order separately the under-mounted cut-out, tap holes (Customised Solutions chapter) and the automatic strainer waste kit (Taps chapter).
Sink 340x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 450 mm.
340
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 400 200 LCTCAA01
Sink 400x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 450 mm.
400
400L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 200 LCTCAA02
Sink 500x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 600 mm.
500
400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 400 200 LCTCAA03
Sink 760x400 mm. • Single sink H 200 mm.• Under-sink base unit min. L 900 mm.
400
760L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760 400 200 LCTCAG01
Design recommendations
120120120120120Ø 35 80
50
120
400
340
400
340
400
400
400
500
400
500
400
760
450 900 1200 900
17901/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s POLISHED STAINLESS STEEL - Sinks, QUADRO series SEMI-FLUSH-MOUNTED Compatible with worktops in all finishes, min. 630 mm deep. Square-edged sink with sharp corners - Bottom with draining folds - Tap and automatic strainer waste holes. Please order separately the built-in cut-out (Customised Solutions chapter), the compulsory automatic strainer waste kit (Taps chapter).
Sink 530x480 mm. • Single sink (400x400) H 200 mm.• 503x453 mm built-in hole.• Under-sink base unit min. L 600 mm (L 900 if at the beginning of composition).• 2 tap holes / automatic strainer waste.
r= 10
480
400
4040
40040 90530
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 480 200 LHTBAA01
Sink 890x480 mm. • Single sink (760x400) H 200 mm.• 863x453 mm built-in hole.• Under-sink base unit min. L 1050 mm.• 2 tap holes / automatic strainer waste.
r= 10
480
400
4040
76040 90890
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 890 480 200 LHTBAG01
Sink 880x480 mm. • Double sink (340x400 + 340x400) H 200 mm.• 853x453 mm built-in hole.• Under-sink base unit min. L 1050 mm.• 3 tap holes / automatic strainer waste.
r= 10
480
400
4040
34034040 70 90880
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 880 480 200 LHTBAC01
Sink 1040x480 mm. • Double sink (500x400 + 340x400) H 200 mm.• 1013x453 mm built-in hole.• Under-sink base unit min. L 1200 mm.• 3 tap holes / automatic strainer waste.
r= 10
480
400
4040
34050040 70 901040
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1040 480 200 LHTBAF01
180 01/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s MATT SATIN STAINLESS STEEL - Sinks, QUADRO series SEMI-FLUSH-MOUNTED Compatible with worktops in all finishes, min. 630 mm deep. Square-edged sink with sharp corners - Bottom with draining folds - Tap and automatic strainer waste holes. Please order separately the built-in cut-out (Customised Solutions chapter), the compulsory automatic strainer waste kit (Taps chapter).
Sink 530x480 mm. • Single sink (400x400) H 200 mm.• 503x453 mm built-in hole.• Under-sink base unit min. L 600 mm (L 900 if at the beginning of composition).• 2 tap holes / automatic strainer waste.
r= 10
480
400
4040
40040 90530
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 480 200 LHTCAA01
Sink 890x480 mm. • Single sink (760x400) H 200 mm.• 863x453 mm built-in hole.• Under-sink base unit min. L 1050 mm.• 2 tap holes / automatic strainer waste.
r= 10
480
400
4040
76040 90890
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 890 480 200 LHTCAG01
Sink 880x480 mm. • Double sink (340x400 + 340x400) H 200 mm.• 853x453 mm built-in hole.• Under-sink base unit min. L 1050 mm.• 3 tap holes / automatic strainer waste.
r= 10
480
400
4040
34034040 70 90880
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 880 480 200 LHTCAC01
Sink 1040x480 mm. • Double sink (500x400 + 340x400) H 200 mm.• 1013x453 mm built-in hole.• Under-sink base unit min. L 1200 mm.• 3 tap holes / automatic strainer waste.
r= 10
480
400
4040
34050040 70 901040
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1040 480 200 LHTCAF01
18101/2016
L = WidthP = DepthH = HeightPr = Price code
Hob - 4 burners (art. 930715210 DB). • Burners power: (1) 3000 W - (2) 1750 W Trial - (3) 3800 W triple rim - (4) 1100 W.• Additional frontal grids.• 1162x463 mm built-in hole.
1 2 3 4
1179
483
701021
419
R= 10 mm.
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1179 483 70 VFRBPS03
Hob - 4 burners (art. 7251 032 DB). • Burners power: (1) 3000 W - (2-4) 1750 W - (3) 1100 W.• 600x500 mm built-in hole.
620
520
62 4
R= 10 mm.
1 2
3 4
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620 520 66 VFRBQS01
Hob - 5 burners (art. 7252 032 DB). • Burners power: (1) 3800 W triple rim - (2) 3000 W - (3) 1100 W - (4-5) 1750 W.• 900x500 mm built-in hole.
920
520
62 4
R= 10 mm.
12 4
3 5
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 920 520 66 VFRBQS02
S i n k s / H o b s / T a p s MATT SATIN STAINLESS STEEL - Hobs, R series SEMI-FLUSH-MOUNTED Compatible ONLY with worktops in Laminate, Wood, Glass, Corian®, Stone, Marble, Granite, Composite, min. 630 mm deep. Knobs: C.R.S. stainless steel series. Please order separately the built-in cut-out (Customised Solutions chapter). Electronic ignition, safety valves, grids in enamelled cast-iron. Default settings for METHANE GAS. Optional nozzles kit for LPG gas (LIQUID GAS) is included. Please check always with Boffi the options for other gas typologies.
182 01/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Sinks, C.R.S. series SEMI-FLUSH-MOUNTED Compatible with worktops in all finishes, min. 630 mm deep. Square-edged sink with sharp corners - Bottom with draining folds - Tap and automatic strainer waste holes. Please order separately the built-in cut-out (Customised Solutions chapter), the compulsory automatic strainer waste kit (Taps chapter). In the sinks with sharp corners a small retention of water could remain on the bottom. It could be wiped with a sponge. The above shall not be considered cause of complaint or disputes. For mounting and sealing on worktops In Laminate, Lasermat, Wood and Corian® please add the relative price increase (see “Customised Solutions” chapter). On worktops in marble, stone, granite and composite the mounting and sealing has to be processed on site by Client . How to position sinks on worktops: 1) min. distance between bowl and front worktop trim: 60 mm. 2) min. distance between bowl and side worktop trim: 50 mm. 3) min. distance between 2 bowls: 50 mm. 4) min. distance between bowl and back worktop trim with 20 mm back-splash: 80 mm.
Sink 540x480 mm (art. BBLAV1V54SF DB). • Single sink (400x400) H 190 mm.• 512x452 mm built-in hole.• Under-sink base unit min. L 600 mm.• 2 tap holes / automatic strainer waste.
400
540
480
400
100
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540 480 190 LHSIAA01
Sink 980x480 mm (art. BBLAV2V4098SF DB). • Double sink (400x400 + 400x400) H 190 mm.• 952x452 mm built-in hole.• Under-sink base unit min. L 1050 mm.• 3 tap holes / automatic strainer waste.
980
480
400
400 100 400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 980 480 190 LHSIAC01
Sink 850x480 mm (art. BBLAV2V85SF DB). • Double sink (400x400 + 270x400) H 190 mm.• 822x452 mm built-in hole.• Under-sink base unit min. L 900 mm.• 3 tap holes / automatic strainer waste.
400
770850
480
400
100 270
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 850 480 190 LHSIAF01
Sink 850x480 mm (art. BBLAV1VP85SF DB). • Single sink (400x400) H 190 mm + countertop waste chute Ø 275 mm.• 822x452 mm built-in hole.• Under-sink base unit min. L 900 mm.• 2 tap holes / automatic strainer waste.
40040
850
480
400
195 215L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 850 480 190 LHSIAM01
18301/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Sinks, C.R.S. series SEMI-FLUSH-MOUNTED Compatible with worktops in all finishes, min. 630 mm deep. Square-edged sink with sharp corners - Bottom with draining folds - Tap and automatic strainer waste holes. Please order separately the built-in cut-out (Customised Solutions chapter), the compulsory automatic strainer waste kit (Taps chapter). In the sinks with sharp corners a small retention of water could remain on the bottom. It could be wiped with a sponge. The above shall not be considered cause of complaint or disputes. For mounting and sealing on worktops In Laminate, Lasermat, Wood and Corian® please add the relative price increase (see “Customised Solutions” chapter). On worktops in marble, stone, granite and composite the mounting and sealing has to be processed on site by Client . How to position sinks on worktops: 1) min. distance between bowl and front worktop trim: 60 mm. 2) min. distance between bowl and side worktop trim: 50 mm. 3) min. distance between 2 bowls: 50 mm. 4) min. distance between bowl and back worktop trim with 20 mm back-splash: 80 mm.
Sink 980x480 mm (art. BBLAV1V814098SF DB). • Single sink (810x400) H 200 mm.• 952x452 mm built-in hole.• Under-sink base unit min. L 1050 mm.• 2 tap holes / automatic strainer waste.
810
980
480
400
130L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 980 480 200 LHSIAG02
184 01/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Hobs, C.R.S. series SEMI-FLUSH-MOUNTED Compatible with worktops in all finishes, min. 630 / 705 mm deep. Knobs: C.R.S. stainless steel series. Please order separately the built-in cut-out (Customised Solutions chapter). Electronic ignition, safety valves, flush-mounted grids in enamelled cast-iron. Default settings for METHANE GAS. Optional nozzles kit for LPG gas (LIQUID GAS) is included. Please check always with Boffi the options for other gas typologies.
Hob - 4 burners (art. BB40/CS/SF DB). • Burners power: (1) 3000 W - (2-3) 1650 W - (3) 1000 W.• 712x552 mm built-in hole.• Compatible ONLY with worktops min. 705 mm deep.
1
2
4
3
76740
580
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 740 580 76 VAIBQI01
Hob - 5 burners (art. BB40TC/CS/SF DB). • Burners power: (1) 3000 W - (2-5) 1650 W - (3) 3250 W - (4) 1000 W.• 1062x552 mm built-in hole.• Compatible ONLY with worktops min. 705 mm deep.
1
2
4
5
3
761090
580
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1090 580 76 VAIBQI02
Hob - 4 burners (art. BB40118/CS/SF DB). • Burners power: (1) 1650 W - (2-4) 3000 W - (3) 1650 W.• Additional frontal grids.• 1152x452 mm built-in hole.
1180
480
R= 10 mm.
1 2 3 4
83
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1180 480 83 VAIBPI01
18501/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s POLISHED STAINLESS STEEL - Sinks, QUADRO series FLUSH-MOUNTED Compatible ONLY with worktops in Laminate, Lasermat , Wood, Corian®, St. steel, Durinox®, Stone, Marble, Granite, Composite, min. 630 mm deep. Square-edged sink with sharp corners - Bottom with draining folds - Tap and automatic strainer waste holes. Please order separately the flush-mounted cut-out (Customised Solutions chapter), the compulsory automatic strainer waste kit (Taps chapter).
Sink 530x480 mm. • Single sink (400x400) H 200 mm.• Under-sink base unit min. L 600 mm (L 900 if at the beginning of composition).• 2 tap holes / automatic strainer waste.
r= 10
480
400
4040
40040 90530
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 480 200 LBTBAA01
Sink 890x480 mm. • Single sink (760x400) H 200 mm.• Under-sink base unit min. L 1050 mm.• 2 tap holes / automatic strainer waste.
r= 10
480
400
4040
76040 90890
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 890 480 200 LBTBAG01
Sink 880x480 mm. • Double sink (340x400 + 340x400) H 200 mm.• Under-sink base unit min. L 1050 mm.• 3 tap holes / automatic strainer waste.
r= 10
480
400
4040
34034040 70 90880
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 880 480 200 LBTBAC01
Sink 1040x480 mm. • Double sink (500x400 + 340x400) H 200 mm.• Under-sink base unit min. L 1200 mm.• 3 tap holes / automatic strainer waste.
r= 10
480
400
4040
34050040 70 901040
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1040 480 200 LBTBAF01
186 01/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s POLISHED STAINLESS STEEL - Sinks, QUADRO series FLUSH-MOUNTED Compatible ONLY with worktops in Laminate, Lasermat , Wood, Corian®, St. steel, Durinox®, Stone, Marble, Granite, Composite, min. 630 mm deep. Square-edged sink with sharp corners - Bottom with draining folds - Tap and automatic strainer waste holes. Please order separately the flush-mounted cut-out (Customised Solutions chapter), the compulsory automatic strainer waste kit (Taps chapter).
Flush-mounted dustbin for worktop. • Ø external 313 mm.• Plastic bucket, 13 l.-capacity with Ø 275 mm lid in stainless steel and gaskets.
Ø 275
Ø 313
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313 313 - LBTIAN02
18701/2016
L = WidthP = DepthH = HeightPr = Price code
Hob - 3 burners. • Burners power: (1) 3500 W triple rim - (2-3) 2000 W.• Additional frontal grids.
321
1084
480
R= 10 60
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1084 480 60 VQABMI02
Hob - 4 burners. • Burners power: (1) 3500 W triple rim - (2) 1000 W - (3-4) 2000 W.• Additional frontal grids.
4321
1377
480
R= 10 60
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1377 480 60 VQABMI03
S i n k s / H o b s / T a p s POLISHED STAINLESS STEEL - Hobs, QUADRO series FLUSH-MOUNTED Compatible ONLY with worktops in Laminate, Lasermat , Wood, Corian®, St. steel, Durinox®, Stone, Marble, Granite, Composite, min. 630 / 830 mm deep. QUADRO series knobs in satin chromium-plated. Please order separately the flush-mounted cut-out (Customised Solutions chapter). For mounting and sealing on worktops In Laminate, Lasermat, Wood and Corian® please add the relative price increase (see “Customised Solutions” chapter). On worktops in marble, stone, granite and composite the mounting and sealing has to be processed on site by Client . Electronic ignition, safety valves, grids in enamelled cast-iron. Default settings for METHANE GAS. Optional nozzles kit for LPG gas (LIQUID GAS) is included. Please check always with Boffi the options for other gas typologies.
188 01/2016
L = WidthP = DepthH = HeightPr = Price code
Hob - 4 burners (art. 930715160 DB). • Burners power: (1) 3000 W - (2) 1750 W - (3) 3800 W triple rim - (4) 1100 W.• Additional frontal grids.
1 2 3 4
1179
483
701021
419
R= 10 mm.
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1179 483 70 VFRBMI03
Hob - 4 burners (art. 7256 032 DB). • Burners power: (1) 3000 W - (2-4) 1750 W - (3) 1000 W.
620
520
62
R= 10 mm.
1 2
3 4
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620 520 66 VFRBNI01
Hob - 5 burners (art. 7257 032 DB). • Burners power: (1) 3800 W triple rim - (2) 3000 W - (3) 1100 W - (4-5) 1750 W.
920
520
62 4
R= 10 mm.
12 4
3 5
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 920 520 66 VFRBNI02
S i n k s / H o b s / T a p s POLISHED STAINLESS STEEL - Hobs, R series FLUSH-MOUNTED Compatible ONLY with worktops in Laminate, Lasermat , Wood, Corian®, St. steel, Durinox®, Stone, Marble, Granite, Composite, min. 630 mm deep. QUADRO series knobs in satin chromium-plated. Please order separately the flush-mounted cut-out (Customised Solutions chapter). For mounting and sealing on worktops In Laminate, Lasermat, Wood and Corian® please add the relative price increase (see “Customised Solutions” chapter). On worktops in marble, stone, granite and composite the mounting and sealing has to be processed on site by Client . Electronic ignition, safety valves, grids in enamelled cast-iron. Default settings for METHANE GAS. Optional nozzles kit for LPG gas (LIQUID GAS) is included. Please check always with Boffi the options for other gas typologies.
18901/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s MATT SATIN STAINLESS STEEL - Sinks, QUADRO series FLUSH-MOUNTED Compatible ONLY with worktops in Laminate, Lasermat , Wood, Corian®, St. steel, Durinox®, Stone, Marble, Granite, Composite, min. 630 mm deep. Square-edged sink with sharp corners - Bottom with draining folds - Tap and automatic strainer waste holes. Please order separately the flush-mounted cut-out (Customised Solutions chapter), the compulsory automatic strainer waste kit (Taps chapter).
Sink 530x480 mm. • Single sink (400x400) H 200 mm.• Under-sink base unit min. L 600 mm (L 900 if at the beginning of composition).• 2 tap holes / automatic strainer waste.
r= 10
480
400
4040
40040 90530
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 480 200 LBTCAA01
Sink 890x480 mm. • Single sink (760x400) H 200 mm.• Under-sink base unit min. L 1050 mm.• 2 tap holes / automatic strainer waste.
r= 10
480
400
4040
76040 90890
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 890 480 200 LBTCAG01
Sink 880x480 mm. • Double sink (340x400 + 340x400) H 200 mm.• Under-sink base unit min. L 1050 mm.• 3 tap holes / automatic strainer waste.
r= 10
480
400
4040
34034040 70 90880
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 880 480 200 LBTCAC01
Sink 1040x480 mm. • Double sink (500x400 + 340x400) H 200 mm.• Under-sink base unit min. L 1200 mm.• 3 tap holes / automatic strainer waste.
r= 10
480
400
4040
34050040 70 901040
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1040 480 200 LBTCAF01
190 01/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s MATT SATIN STAINLESS STEEL - Sinks, QUADRO series FLUSH-MOUNTED Compatible ONLY with worktops in Laminate, Lasermat , Wood, Corian®, St. steel, Durinox®, Stone, Marble, Granite, Composite, min. 630 mm deep. Square-edged sink with sharp corners - Bottom with draining folds - Tap and automatic strainer waste holes. Please order separately the flush-mounted cut-out (Customised Solutions chapter), the compulsory automatic strainer waste kit (Taps chapter).
Flush-mounted dustbin for worktop. • Ø external 313 mm.• Plastic bucket, 13 l.-capacity with Ø 275 mm lid in stainless steel and gaskets.
Ø 275
Ø 313
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313 313 - LBTIAN03
19101/2016
L = WidthP = DepthH = HeightPr = Price code
Hob - 4 burners (art. 930715160 DB). • Burners power: (1) 3000 W - (2) 1750 W - (3) 3800 W triple rim - (4) 1100 W.• Additional frontal grids.
1 2 3 4
1179
483
701021
419
R= 10 mm.
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1179 483 70 VFRBMS03
Hob - 4 burners (art. 7256 032 DB). • Burners power: (1) 3000 W - (2-4) 1750 W - (3) 1000 W.
620
520
62
R= 10 mm.
1 2
3 4
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620 520 66 VFRBNS01
Hob - 5 burners (art. 7257 032 DB). • Burners power: (1) 3800 W triple rim - (2) 3000 W - (3) 1100 W - (4-5) 1750 W.
920
520
62 4
R= 10 mm.
12 4
3 5
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 920 520 66 VFRBNS02
S i n k s / H o b s / T a p s MATT SATIN STAINLESS STEEL - Hobs, R series FLUSH-MOUNTED Compatible ONLY with worktops in Laminate, Lasermat , Wood, Corian®, St. steel, Durinox®, Stone, Marble, Granite, Composite, min. 630 mm deep. Knobs: C.R.S. stainless steel series. Please order separately the flush-mounted cut-out (Customised Solutions chapter). For mounting and sealing on worktops In Laminate, Lasermat, Wood and Corian® please add the relative price increase (see “Customised Solutions” chapter). On worktops in marble, stone, granite and composite the mounting and sealing has to be processed on site by Client . Electronic ignition, safety valves, grids in enamelled cast-iron. Default settings for METHANE GAS. Optional nozzles kit for LPG gas (LIQUID GAS) is included. Please check always with Boffi the options for other gas typologies.
192 01/2016
L = WidthP = DepthH = HeightPr = Price code
Hob - 4 burners. • Burners power: 1 x 3000 W - 1 x 1000 W - 2 x 1750 W.
625 80
580
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 625 580 80 VAFBNI03
Hob - 5 burners. • Burners power: 1 x 300/4200 W independent triple rim - 1 x 3000 W - 1 x 1000 W - 2 x 1750 W.
911 80
580
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 911 580 80 VAFBNI04
S i n k s / H o b s / T a p s MATT SATIN STAINLESS STEEL - Hobs, APRILE series FLUSH-MOUNTED Compatible ONLY with worktops in Laminate, Lasermat , Wood, Corian®, St. steel, Durinox®, Stone, Marble, Granite, Composite, min. 705 mm deep (VAFBNI08 min. 630 mm). Knobs: C.R.S. stainless steel series. Please order separately the flush-mounted cut-out (Customised Solutions chapter). For mounting and sealing on worktops In Laminate, Lasermat, Wood and Corian® please add the relative price increase (see “Customised Solutions” chapter). On worktops in marble, stone, granite and composite the mounting and sealing has to be processed on site by Client . Electronic ignition, safety valves, grids in enamelled cast-iron. Default settings for METHANE GAS. Optional nozzles kit for LPG gas (LIQUID GAS) is included. Please check always with Boffi the options for other gas typologies.
Hob - 6 burners. • Burners power: 2 x 300/4200 W independent triple rim - 1 x 3000 W - 1 x 1000 W - 2 x 1750 W.
1196 80
580
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1196 580 80 VAFBNI06
Hob - 4 burners. • Burners power: 2 x 300/4200 W independent triple rim - 2 x 1750 W.
801196
480
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1196 480 84 VAFBNI08
19301/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Sinks, C.R.S. series FLUSH-MOUNTED Compatible ONLY with worktops in Laminate, Lasermat , Wood, Corian®, St. steel, Durinox®, Stone, Marble, Granite, Composite, min. 630 mm deep. Square-edged sink with sharp corners - Bottom with draining folds - Tap and automatic strainer waste holes. Please order separately the flush-mounted cut-out (Customised Solutions chapter), the compulsory automatic strainer waste kit (Taps chapter). In the sinks with sharp corners a small retention of water could remain on the bottom. It could be wiped with a sponge. The above shall not be considered cause of complaint or disputes. For mounting and sealing on worktops In Laminate, Lasermat, Wood and Corian® please add the relative price increase (see “Customised Solutions” chapter). On worktops in marble, stone, granite and composite the mounting and sealing has to be processed on site by Client . How to position sinks on worktops: 1) min. distance between bowl and front worktop trim: 60 mm. 2) min. distance between bowl and side worktop trim: 50 mm. 3) min. distance between 2 bowls: 50 mm. 4) min. distance between bowl and back worktop trim with 20 mm back-splash: 80 mm.
Sink 540x480 mm (art. BBLAV1V54F DB). • Single sink (400x400) H 190 mm.• Under-sink base unit min. L 600 mm.• 2 tap holes / automatic strainer waste.
400
540
480
400
100
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540 480 190 LBTIAA02
Sink 980x480 mm (art. BBLAV2V4098F DB). • Double sink (400x400 + 400x400) H 190 mm.• Under-sink base unit min. L 1050 mm.• 3 tap holes / automatic strainer waste.980
480
400
400 100 400
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 980 480 190 LBTIAC03
Sink 850x480 mm (art. BBLAV2V85F DB). • Double sink (400x400 + 270x400) H 190 mm.• Under-sink base unit min. L 900 mm.• 3 tap holes / automatic strainer waste.
400
770850
480
400
100 270
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 850 480 190 LBTIAF01
Sink 850x480 mm (art. BBLAV1VP85F DB). • Single sink (400x400) H 190 mm + countertop waste chute Ø 275 mm.• Under-sink base unit min. L 900 mm.• 2 tap holes / automatic strainer waste.
40040
850
480
400
195 215L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 850 480 190 LBTIAM01
194 01/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Sinks, C.R.S. series FLUSH-MOUNTED Compatible ONLY with worktops in Laminate, Lasermat , Wood, Corian®, St. steel, Durinox®, Stone, Marble, Granite, Composite, min. 630 mm deep. Square-edged sink with sharp corners - Bottom with draining folds - Tap and automatic strainer waste holes. Please order separately the flush-mounted cut-out (Customised Solutions chapter), the compulsory automatic strainer waste kit (Taps chapter). In the sinks with sharp corners a small retention of water could remain on the bottom. It could be wiped with a sponge. The above shall not be considered cause of complaint or disputes. For mounting and sealing on worktops In Laminate, Lasermat, Wood and Corian® please add the relative price increase (see “Customised Solutions” chapter). On worktops in marble, stone, granite and composite the mounting and sealing has to be processed on site by Client . How to position sinks on worktops: 1) min. distance between bowl and front worktop trim: 60 mm. 2) min. distance between bowl and side worktop trim: 50 mm. 3) min. distance between 2 bowls: 50 mm. 4) min. distance between bowl and back worktop trim with 20 mm back-splash: 80 mm.
Sink 980x480 mm (art. BBLAV1V814098F DB). • Single sink (810x400) H 200 mm.• Under-sink base unit min. L 1050 mm.• 2 tap holes / automatic strainer waste.
810
980
480
400
130L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 980 480 200 LBTIAG07
Flush-mounted dustbin for worktop. • Ø external 313 mm.• Plastic bucket, 13 l.-capacity with Ø 275 mm lid in stainless steel and gaskets.
Ø 275
Ø 313
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313 313 - LBTIAN01
19501/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Sinks, C.R.S. series FLUSH-MOUNTED Compatible ONLY with worktops in Laminate, Lasermat , Wood, Corian®, St. steel, Durinox®, Stone, Marble, Granite, Composite, min. 705 mm deep. Square-edged sink with sharp corners - Bottom with draining folds - Tap and automatic strainer waste holes. Please order separately the flush-mounted cut-out (Customised Solutions chapter), the compulsory automatic strainer waste kit (Taps chapter). In the sinks with sharp corners a small retention of water could remain on the bottom. It could be wiped with a sponge. The above shall not be considered cause of complaint or disputes. For mounting and sealing on worktops In Laminate, Lasermat, Wood and Corian® please add the relative price increase (see “Customised Solutions” chapter). On worktops in marble, stone, granite and composite the mounting and sealing has to be processed on site by Client . How to position sinks on worktops: 1) min. distance between bowl and front worktop trim: 60 mm. 2) min. distance between bowl and side worktop trim: 50 mm. 3) min. distance between 2 bowls: 50 mm. 4) min. distance between bowl and back worktop trim with 20 mm back-splash: 80 mm.
Sink 1180x580 mm (art. BBLAV2V118F DB). • Double sink (500x500 + 500x500) H 190 mm.• Under-sink base unit min. L 1200 mm.• 3 tap holes / automatic strainer waste.
50050 50500
1180
580
500
80
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1180 580 190 LBTIAC06
Sink 980x580 mm (art. BBLAV1VP98F DB). • Single sink (500x500) H 190 mm + countertop waste chute Ø 275 mm.• Under-sink base unit min. L 1050 mm.• 2 tap holes / automatic strainer waste.
50040 179
980
580
500
40
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 980 580 190 LBTIAM03
Sink 980x580 mm (art. BBLAV2V98F DB). • Double sink (500x500 + 270x500) H 190 mm.• Under-sink base unit min. L 1050 mm.• 3 tap holes / automatic strainer waste.
50055 100 270
980
580
500
55
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 980 580 190 LBTIAF03
196 01/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Sinks, C.R.S. series FLUSH-MOUNTED Compatible ONLY with worktops in Laminate, Lasermat , Wood, Corian®, St. steel, Durinox®, Stone, Marble, Granite, Composite, min. 705 mm deep. Rounded-edges sink - Tap holes. Please order separately the flush-mounted cut-out (Customised Solutions chapter), the compulsory automatic strainer waste kit (Taps chapter). In the sinks with sharp corners a small retention of water could remain on the bottom. It could be wiped with a sponge. The above shall not be considered cause of complaint or disputes. For mounting and sealing on worktops In Laminate, Lasermat, Wood and Corian® please add the relative price increase (see “Customised Solutions” chapter). On worktops in marble, stone, granite and composite the mounting and sealing has to be processed on site by Client . How to position sinks on worktops: 1) min. distance between bowl and front worktop trim: 60 mm. 2) min. distance between bowl and side worktop trim: 50 mm. 3) min. distance between 2 bowls: 50 mm. 4) min. distance between bowl and back worktop trim with 20 mm back-splash: 80 mm.
Sink 530x580 mm (art. BBLAV1V500F DB). • Single sink (400x500) H 200 mm.• Under-sink base unit min. L 600 mm.• 2 tap holes / automatic strainer waste.
500
40
40
580
53040065 65
r = 100
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 580 200 LBTIAA03
Sink 790x580 mm (art. BBLAV2V340F DB). • Double sink (342x410 + 342x410) H 190 mm.• Under-sink base unit min. L 900 mm.• 3 tap holes / automatic strainer waste.
410
130
40
580
790342 34238 30 38
r = 75 r = 75
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 790 580 190 LBTIAC05
19701/2016
L = WidthP = DepthH = HeightPr = Price code
S i n k s / H o b s / T a p s C.R.S. SCOTCH BRITE STAINLESS STEEL - Hobs, C.R.S. series FLUSH-MOUNTED Compatible ONLY with worktops in Laminate, Lasermat , Wood, Corian®, St. steel, Durinox®, Stone, Marble, Granite, Composite, min. 630 / 705 mm deep. Knobs: C.R.S. stainless steel series. Please order separately the flush-mounted cut-out (Customised Solutions chapter). For mounting and sealing on worktops In Laminate, Lasermat, Wood and Corian® please add the relative price increase (see “Customised Solutions” chapter). On worktops in marble, stone, granite and composite the mounting and sealing has to be processed on site by Client . Electronic ignition, safety valves, flush-mounted grids in enamelled cast-iron. Default settings for METHANE GAS. Optional nozzles kit for LPG gas (LIQUID GAS) is included. Please check always with Boffi the options for other gas typologies.
Hob - 4 burners (art. BB40/CS/F DB). • Burners power: (1) 3000 W - (2-3) 1650 W - (3) 1000 W.• Compatible ONLY with worktops min. 705 mm deep.
1
2
4
3
76740
580
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 740 580 76 VAIBNI01
Hob - 5 burners (art. BB40TC/CS/F DB). • Burners power: (1) 3000 W - (2-5) 1650 W - (3) 3250 W - (4) 1000 W.• Compatible ONLY with worktops min. 705 mm deep.
1
2
4
5
3
761090
580
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1090 580 76 VAIBNI02
Hob - 6 burners (art. BB402TC/CS/F DB). • Burners power: (1-2) 3250 W triple rim - (3) 3000 W - (4-6) 1650 W - (5) 1000 W.• Compatible ONLY with worktops min. 705 mm deep.
1280
3
4
5
6
11580
76
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1280 580 76 VAIBNI03
Hob - 4 burners (art. BB40118/CS/F DB). • Burners power: (1) 1650 W - (2-4) 3000 W - (3) 1650 W.• Additional frontal grids.
1 2 3 4
1180
R= 10 mm.
83
480
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1180 480 83 VAIBMI02
198 01/2016
L = WidthP = DepthH = HeightPr = Price code
Mixer Design Boffi by KWC.
• Lever in surgical-grade hardened stainless steel.• Swivelling spout.• Pull-out spray head with integrated LED light.• Voltage: 220 V - 50 Hz (NOT compatible with USA market).• Ø 35 mm built-in hole.
Totally in stainless steel. . . . . . . . . . . . . . . . . . . . . . REAA1
S i n k s / H o b s / T a p s Tap Design Boffi
250
405
245200
max. 45
M33440
1/2"
Mixer Design Boffi by KWC.
• Lever in surgical-grade hardened stainless steel.• Swivelling spout.• Pull-out spray head.• Ø 35 mm built-in hole.
Totally in stainless steel. . . . . . . . . . . . . . . . . . . . . . REAA2
369
230
231
199
390
M 33
max
. 45
3/8"
Mixer Design Boffi.
• 360° swivelling spout.• Ø 35 mm built-in hole.
Totally in stainless steel. . . . . . . . . . . . . . . . . . . . . . REAA7
111244
210
164
ø 45
R 40
200
303
Shut-off spray head Design Boffi.
• Pull-out.• 1/2“ connection.• Ø 35 mm built-in hole.
Totally in stainless steel - Satin. . . . . . . . . . . . . . . . . RJFA1Totally in stainless steel - Polished. . . . . . . . . . . . . . RJFA2
Ø 44
Ø 25
68
130
10
Mixer Design Boffi.
• 360° swivelling spout.• Lateral lever.• Ø 35 mm built-in hole.
Totally in stainless steel. . . . . . . . . . . . . . . . . . . . . . REAA8
271
357
247
106
Ø 45
Ø 39
Mixer Design Boffi, GASTRO series by KWC.
• 360° swivelling spout.• Compatible ONLY with worktops, min. 830 mm deep.• Capacity: 3 bar, with jet-breaker, 42 lt/min.• Ø 28 mm built-in hole.
Chromium-plated. . . . . . . . . . . . . . . . . . . . . . . . . . . REAE2
153
3/4"
110300
9535
5
MAX
. 60
160
3/4"
19901/2016
L = WidthP = DepthH = HeightPr = Price code
Hot water dispenser Design Boffi.
• 98° hot filtered water dispenser.• 2,5 litres stainless steel storage tank, fixed to wall (under the sink) or on cabinet
side panel.• Please arrange a socket for the tank and a water connection.• Ø 35 mm built-in hole.• 360° swivelling spout.
Totally in stainless steel. . . . . . . . . . . . . . . . . . . . . . RREA1Filter art. 1973082 (spare part / package of 2 pieces). . . . RREA2
S i n k s / H o b s / T a p s Tap Design Boffi
151
Ø 55
Ø 12
146
49
125
222
156
279
max
368
171
Mixer Design Boffi.
• 360° swivelling spout.• Lateral lever.• Externally treated with PVD (Physical Vapor Deposition) technique.• Ø 35 mm built-in hole.
Matt black. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REAA10
271
357
247
106
Ø 45
Ø 39
Mixer Design Boffi.
• 135° swivelling spout.• Pull-out spray head.• Externally treated with PVD (Physical Vapor Deposition) technique.• Ø 35 mm built-in hole.
Matt black. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REAA11
393
240
194
15°
Shut-off spray head Design Boffi.
• Pull-out.• 1/2“ connection.• Externally treated with PVD (Physical Vapor Deposition) technique.• Ø 35 mm built-in hole.
Matt black. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RJFA04
Ø 44
Ø 25
68
130
10
Mixer Design Boffi.
• 135° swivelling spout.• Pull-out spray head.• Ø 35 mm built-in hole.
Totally in stainless steel. . . . . . . . . . . . . . . . . . . . . . REAA9
393
240
194
15°
200 01/2016
L = WidthP = DepthH = HeightPr = Price code
W1 series mixer.
• Integrated control knobs.• 160° swivelling spout.• Adjustable aerator.• A = Lever for temperature adjustment.• B = Lever for water supply.• Ø 35 mm built-in hole.
Brushed stainless steel. . . . . . . . . . . . . . . . . . . . . . REFA01
S i n k s / H o b s / T a p s Tap Design Norbert Wangen
18
300
Ø 35A
B
36
Ø 55
1/2"
230
Spout, W1 series.
• 160° swivelling spout.• Adjustable aerator.• To be matched with knobs code RGFA02.• Ø 35 mm built-in hole.
Brushed stainless steel. . . . . . . . . . . . . . . . . . . . . . RIFA06
18
300
Ø 3536
Ø 55
1/2"
230
Cold/hot group, W1 series.
• 1/2“ connection.• Ø 35 mm built-in hole.
Brushed stainless steel. . . . . . . . . . . . . . . . . . . . . . RGFA02
1/2"
Ø 44
27
Pull-out spray head, W1 series.
• To be matched with knobs code RGFA02.• Ø 35 mm built-in hole.
Brushed stainless steel. . . . . . . . . . . . . . . . . . . . . . RJFA03
L. 1400
83
15
32
171035
Ø 44
1/2"
Ø 23
20101/2016
L = WidthP = DepthH = HeightPr = Price code
Automatic strainer waste kit for single sink.
• It includes: knob C.R.S. design Boffi, pop-up plug, waste-drain and 1-way si-phon.
• Available in stainless steel, polished stainless steel, matt black.
Stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ALER01SPolished stainless steel. . . . . . . . . . . . . . . . . . . . . . ALER01LMatt black. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ALER01N
S i n k s / H o b s / T a p s Tap - Accessories.
Automatic strainer waste kit for double sink.
• It includes: 2 knobs C.R.S. design Boffi, 2 pop-up plugs, 2 waste-drains, 2-ways siphon, 1 pop-up plug extension.
• Available in stainless steel, polished stainless steel, matt black.
Stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ALES01SPolished stainless steel. . . . . . . . . . . . . . . . . . . . . . ALES01LMatt black. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ALES01N
Automatic strainer waste kit for double sink in Corian®.
• It includes: knob C.R.S. design Boffi, pop-up plug, waste-drain with cover in white Corian® and 1-way siphon.
• Available in stainless steel, polished stainless steel, matt black.
Stainless steel + waste-drain covering in Corian®. ALEV01SPolished stainless steel + waste-drain covering in Corian®. ALEV01LMatt black + waste-drain covering in Corian®. . . . ALEV01N
Automatic strainer waste kit for double sink in Corian®.
• It includes: 2 knobs C.R.S. design Boffi, 2 pop-up plugs, 2 waste-drains with cover in white Corian®, 2-ways siphon, 1 pop-up plug extension.
• Available in stainless steel, polished stainless steel, matt black.
Stainless steel + waste-drain covering in Corian®. ALEW01SPolished stainless steel + waste-drain covering in Corian®. ALEW01LMatt black + waste-drain covering in Corian®. . . . ALEW01N
202 01/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s WD35 Built-in hoods in satin stainless steel. Technical features: Controls: electronic (3 speeds + intensive) Motors: n° 1 Airflow: 1000 m3/h Pressure: 520 Pa Noise level: 61 dBa Motor power: 300 W Voltage: EUROPE 230 V - 50 Hz / USA 110 V - 60 Hz Lighting: 2 LED spotlights (L 600 mm) / 4 LED spotlights (L 900-1200 mm) / Colour temperature: 3000 K Air outlet: ø 150 mm + reducer ø 120 mm
WD35 - EXTERNALLY VENTED built-in hood. • Front flap fold in stainless steel.• Lighting: LED spotlights.• Lower perimeter ducting system.• It can be integrated inside wall units for hood, with hinged or flap door.• USA version: the single pieces are UL-certified (the assembled hood is not certi-
fied).
L P H
L 600 - EUROPE version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 560 - - VW2AZI01L 600 - USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 560 - - VW2UZI01L 900 - EUROPE version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 860 - - VW2AZI02L 900 - USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 860 - - VW2UZI02L 1200 - EUROPE version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1160 - - VW2AZI03L 1200 - USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1160 - - VW2UZI03
20301/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s 607 Built-in hoods in satin stainless steel. Technical features: Controls: electronic (3 speeds + intensive) + radio control. Motors: n° 1 Airflow: 1000 m3/h Pressure: 520 Pa Noise level: 61 dBa Motor power: 300 W Voltage: EUROPE 230 V - 50 Hz / USA 110 V - 60 Hz Lighting: 2 LED spotlights (L 600 mm) / 4 LED spotlights (L 900-1200 mm) / Colour temperature: 3000 K Air outlet: ø 150 mm + reducer ø 120 mm Temperature sensor with automatic switch (speed 1) Automatic switch when the shelf is extracted
607 - EXTERNALLY VENTED built-in hood. • Lower pull-out shelf.• Lighting: LED spotlights.• Lower perimeter ducting system.• It can be integrated inside wall units for hood, with hinged or flap door.• USA version: the single pieces are UL-certified (the assembled hood is not certi-
fied).
L P H
L 600 - EUROPE version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 560 - - VS2AZI01L 600 - USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 560 - - VS2UZI01L 900 - EUROPE version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 860 - - VS2AZI02L 900 - USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 860 - - VS2UZI02L 1200 - EUROPE version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1160 - - VS2AZI03L 1200 - USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1160 - - VS2UZI03
204 01/2016
L = WidthP = DepthH = HeightPr = Price code
FLAT-KAP - EXTERNALLY VENTED hood with sail-shelf. - ISLAND. • Perimeter ducting system.• Please order separately the height-adjustable chimney cod. AKIT014.• Version without motor: please order separately the remote motor cod. EHLCI0001.
800 - 1100900 - 1200
500700
H
2033
545= =
395= =
2020
L P H
L 900 - EUROPE version. - (Net weight 54,5 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 700 - VABAKI12L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 54,5 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 700 - VABCCI12L 1200 - EUROPE version. - (Net weight 57,6 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 700 - VABAKI14L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 57,6 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 700 - VABCCI14
H o o d s FLAT-KAP Hoods in stainless steel, fixed-sized. Technical features: Controls: Control Ball (3 + i) + radio control. Motors: n° 1 IEC capacity: 830 m3/h - UL capacity: 900 m3/h Pressure: 480 Pa Noise level: 69 dBA Motor power: 316 W Voltage: 220 V - 50 Hz Lighting: halogen 2 x 20 W Air outlet: ø 150 mm - 120 mm with non-return valve
FLAT-KAP - EXTERNALLY VENTED hood with sail-shelf. - WALL-MOUNTED. • Perimeter ducting system.• Please order separately the height-adjustable chimney cod. AKIT013 and any
back panel cod. SVAJBU01/02.• Version without motor: please order separately the remote motor cod. EHLCI0001.
800 - 1100900 - 1200
500600
H
2033
560480= =
2020
L P H
L 900 - EUROPE version. - (Net weight 53,1 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 600 - VABAHI12L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 53,1 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 600 - VABCAI12L 1200 - EUROPE version. - (Net weight 55,8 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 600 - VABAHI14L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 55,8 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 600 - VABCAI14
FLAT-KAP - Back panel for WALL-MOUNTED hood. • With shelf P 150 mm.
900 ÷ 1200 150
1745
02020
L P H
L 900. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 150 450 SVAJBU01L 1200. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 150 450 SVAJBU02
20501/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s FLAT-KAP Customised hoods in stainless steel. Technical features: Controls: Control Ball (3 + i) + radio control. Motors: n° 1 IEC capacity: 830 m3/h - UL capacity: 900 m3/h Pressure: 480 Pa Noise level: 69 dBA Motor power: 316 W Voltage: 220 V - 50 Hz Lighting: halogen 2 x 20 W Air outlet: ø 150 mm - 120 mm with non-return valve
FLAT-KAP - Externally venting unit. - ISLAND. • Perimeter ducting system.• Radio control is supplied.• Please order separately the height-adjustable chimney cod. AKIT014, the Flat
shelf-sail cod. VABBFI01 + the additional lighting cod. ZDIDA0* if necessary and the tie-rods cod. AKFA005.
• Version without motor: please order separately the remote motor cod. EHLCI0001.
800 - 1100 500
H
33
545= =
395= =
2020
L P H
L 800 - EUROPE version. - (Net weight 45,0 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 500 - VABAKI11L 800 - EUROPE version - WITHOUT MOTOR. - (Net weight 45,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 500 - VABCCI11L 1100 - EUROPE version. - (Net weight 45,0 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1100 500 - VABAKI13L 1100 - EUROPE version - WITHOUT MOTOR. - (Net weight 45,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . 1100 500 - VABCCI13
FLAT-KAP - Flat sail-shelf. - ISLAND. • Please order separately the tie-rods cod. AKFA005 and, if necessary, the addi-tional lighting cod. ZDIDA0*.
• 1 = Stainless steel beam-holder for halogen spotlights. Max nr. 3 spotlights per sail-shelf.
• L max 3850 mm.
1200 ÷ 3850L
700
20
H
2020
1
L P H
Price per linear metre. - (Net weight 15,0 kg/m2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 700 20 VABBFI01
FLAT-KAP - Tie-rod for Flat sail-shelf. • H min 500 / max 2000 mm.
H
2020
L P H
Unit price. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AKFA005
206 01/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s FLAT-KAP Customised hoods in stainless steel.
FLAT-KAP - Set of additional lighting. • For wall-mounted or island sail-shelf.• To be ordered ONLY if an increase of standard lighting (2 spotlights- already avail-
able on externally venting unit) is necessary.• Please add the transformer cod. AVMU001 (for max 3 spotlights).• Lighting: halogen 20 W (for each spotlight).
L P H
1 spotlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZDIDA032 spotlights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZDIDA023 spotlights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZDIDA01
20701/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s FLAT-KAP Chimney / Accessories.
FLAT-KAP - Chimney for WALL-MOUNTED hood/externally venting unit. • H min 700 / max 2000 mm.• In case of lateral or rear air outlet please add the cut-out cod. ZDIH***.
H
560480
120
= =210
2020
L P H
Price per linear metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 560 480 - AKIT013
FLAT-KAP - Chimney for ISLAND hood/externally venting unit. • H min 700 / max 2000 mm.• In case of lateral or rear air outlet please add the cut-out cod. ZDIH***.
H
545= =
395= =
2020
165
L P H
Price per linear metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 545 395 - AKIT014
208 01/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s GLASS Hoods in stainless steel and transparent glass, fixed-sized. Technical features: Controls: Control Ball (3 + i) + radio control. Motors: n° 1 IEC capacity: 830 m3/h - UL capacity: 900 m3/h Pressure: 480 Pa Noise level: 69 dBA Motor power: 316 W Voltage: 220 V - 50 Hz Lighting: fluorescent 2 x 8 W Air outlet: ø 150 mm - 120 mm with non-return valve Weight: externally venting unit 35 kg / sail-shelf 20 kg per square metre.
GLASS - EXTERNALLY VENTED hood with glass shelf. - WALL-MOUNTED. • Perimeter ducting system.• Please order separately the height-adjustable chimney cod. AKTT015.
8
H
4255025575
L
386 470
2020
L P H
L 600 - EUROPE version. - (Net weight 42,0 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 575 - VAGAHJ11L 900 - EUROPE version. - (Net weight 45,5 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 575 - VAGAHJ12L 1200 - EUROPE version. - (Net weight 49,0 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 575 - VAGAHJ13
GLASS - EXTERNALLY VENTED hood with glass shelf. - ISLAND. • Perimeter ducting system.• Please order separately the height-adjustable chimney cod. AKIT018.• PLEASE NOTE: the position of the lower hole for the fumes outlet is not centred
with the chimney middle axis and the glass shelf.
418
700 80
H
L
386
2020
L P H
L 900 - EUROPE version. - (Net weight 47,6 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 700 - VAGAKJ12L 1200 - EUROPE version. - (Net weight 51,8 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 700 - VAGAKJ13
20901/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s GLASS Customised hoods in stainless steel and transparent glass. Technical features: Controls: Control Ball (3 + i) + radio control. Motors: n° 1 IEC capacity: 830 m3/h - UL capacity: 900 m3/h Pressure: 480 Pa Noise level: 69 dBA Motor power: 316 W Voltage: 220 V - 50 Hz Lighting: fluorescent 2 x 8 W Air outlet: ø 150 mm - 120 mm with non-return valve
GLASS - Externally venting unit. - ISLAND. • Perimeter ducting system.• Mod. TN228CB3i2NIX/A/39• Please order separately the height-adjustable chimney cod. AKIT018, the glass
shelf cod.VAGBFV0*, the tie-rods cod. AKFA006 and the holes for tie-rods cod. ZMVEP01.
700L
2020 80
H
386 418
L P H
EUROPE version. - (Net weight 35,0 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - VAGAHI11
GLASS - Shelf in transparent glass. - ISLAND. • Unit price.• Please order separately the height-adjustable chimney cod. AKIT018, the glass
shelf cod.VAGBFV0*, the tie-rods cod. AKFA006 and the holes for tie-rods cod. ZMVEP01.
• PLEASE NOTE: the position of the lower hole for the fumes outlet is not centred with the chimney middle axis and the glass shelf.
ZMVEP01
700 80L
L P H
L min 1201 / max 1800 mm. - (Net weight 20,0 kg/m2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 700 80 VAGBFV01L min 1801 / max 2400 mm. - (Net weight 20,0 kg/m2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 700 80 VAGBFV02Cut-out for tie-rod fixing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZMVEP01
GLASS - Tie-rod for shelf in transparent glass. - ISLAND. • Stainless steel.• Unit price.
H
L P H
H min 700 / max 2000 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AKFA006
210 01/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s GLASS Chimney / Accessories.
GLASS - Chimney for WALL-MOUNTED hood/externally venting unit. • Stainless steel.• H min 700 / max 2000 mm.• In case of lateral or rear air outlet please add the cut-out cod. ZDIH***.• Min. distance between shelf and lateral/rear air outlet= 800 mm.
H
386 210
Ø 150
470
120
L P H
Price per linear metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386 470 - AKTT015
GLASS - Chimney for ISLAND hood/externally venting unit. • Stainless steel.• H min 700 / max 2000 mm.• In case of lateral or rear air outlet please add the cut-out cod. ZDIH***.• Min. distance between shelf and lateral/rear air outlet= 800 mm.
418
165
H
386
Ø 150
L P H
Price per linear metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386 418 - AKIT018
21101/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s FLAT-KAP / GLASS Technical details.
L max 3000
L max 1500 L max 1500
1500 < L < 3000
1201 < L > 3850 (FLAT)1201 < L > 2400 (GLASS)
50 min.
6003000
2400
~ 2135~ 335
1500 < L < 3000
540 L max 3000
SxDx
Technical chart for tie-rods positioning for FLAT sail-shelf and GLASS shelf. MAX WIDTH: 3850 mm (FLAT sail-shelf) - 2400 mm (GLASS shelf). MAX. DISTANCE BETWEEN RODS: 1500 mm. MIN. DISTANCE BETWEEN END OF SAIL-SHELF AND EXTERNALLY VENTING UNIT: 50 mm
Example.
212 01/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s CEILING Hoods to be completed with finished covering panels. Structure made of stainless steel, customised height (H min 600 / max 1200 mm, compatible with ceiling height from 2400 up to 3200 mm). The distance between floor and hood (lower ventilating part) should be min. 1800 and max. 2000 mm. Technical features: Controls: electronic push-button panel + radio control (for island version only). Motors: n° 1 Max capacity: 1000 m3/h Voltage: EUROPE 220 V - 50 Hz / USA 110 V - 60 Hz 3 speeds + turbo. Lighting: L 1200 mm = 3 halogen spotlights 20 W / L 1800 mm = 4 halogen spotlights 20 W. Air outlet: Ø 150 mm with non-return valve, Ø 150 mm flexible aluminium tube, extensible up to L 1500 mm.
CEILING - EXTERNALLY VENTED hood. - WALL-MOUNTED. • Perimeter ducting system.• Please order separately the covering panels.• Please order separately the set of plate for lateral/rear air outlet cod. AKIR002 (ex-
ternally vented use), if necessary or the grid set for lateral air outlet cod. AKIR001 (for transforming into recirculating version).
• H min 600 mm (700 mm with lateral or rear air outlet) / max 1200 mm.• USA version: the single pieces are UL-certified (the assembled hood is not certi-
fied).
==
==
1200 / 1800
Ø 150
550
H
A
ABB
B
B
L P H
L 1200 - EUROPE version. - (Net weight 41,0 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 550 - VACAHI01L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 41,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 550 - VACCAI01L 1200 - USA version. - (Net weight 41,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 550 - VACUHI01L 1800 - EUROPE version. - (Net weight 51,0 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 550 - VACAHI02L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 51,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 550 - VACCAI02L 1800 - USA version. - (Net weight 51,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 550 - VACUHI02
CEILING - EXTERNALLY VENTED hood. - ISLAND. • Perimeter ducting system.• Please order separately the covering panels.• Please order separately the set of plate for lateral/rear air outlet cod. AKIR002 (ex-
ternally vented use), if necessary or the grid set for lateral air outlet cod. AKIR001 (for transforming into recirculating version).
• H min 600 (700 mm with lateral or rear air outlet) / max 1200 mm. To be used with ceiling height min. 2400 and max. 3200 mm. The lower ventilating hood shelf should be fitted min at 1800 mm and max at 2000 mm from the floor.
• USA version: the single pieces are UL-certified (the assembled hood is not certi-fied).
==
==
1200 / 1800
Ø 150
700
H
A
A
AABB
B
B
L P H
L 1200 - EUROPE version. - (Net weight 45,0 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 700 - VACAKI01L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 45,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 700 - VACCCI01L 1200 - USA version. - (Net weight 45,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 700 - VACUKI01L 1800 - EUROPE version. - (Net weight 58,0 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 700 - VACAKI02L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 58,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 700 - VACCCI02L 1800 - USA version. - (Net weight 58,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 700 - VACUKI02
21301/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s CEILING Hoods to be completed with finished covering panels.
CEILING - FRONTAL / REAR (A) covering panel. - WALL-MOUNTED / ISLAND. • Finishes: glass (white, black, frosted Extralight white – dove-grey - coffee) / stain-less steel (horizontally satin) / Corian® / mirror.
• H min 600 / max 1200 mm.• Joining of frontal/lateral panel:• 1 = with overlay, for stainless steel finish.• 2 = 45° connection, for Corian® / Glass / Mirror finishes.
H
A
1200 / 1800
30 1
2
L P H
L 1200 - Price per square metre. - (Net weight 15,0 kg/m2).. . . . . . . . . . . . . . . . . . . . . . . . . 1200 16 - SVAYBV01
L 1800 - Price per square metre. - (Net weight 15,0 kg/m2).. . . . . . . . . . . . . . . . . . . . . . . . . 1800 16 - SVAYBV02
CEILING - LATERAL (B) covering panel. - WALL-MOUNTED. • Please order always 2 lateral panels for 1 hood.• Finishes: glass (white, black, frosted Extralight white – dove-grey - coffee) / stain-
less steel (horizontally satin) / Corian® / mirror.• H min 600 / max 1200 mm.• Reversible.• Joining of frontal/lateral panel:• 1 = with overlay, for stainless steel finish.• 2 = 45° connection, for Corian® / Glass / Mirror finishes.
534 16
B
H
30 1
2
L P H
P 550 - Price per square metre. - (Net weight 15,0 kg/m2).. . . . . . . . . . . . . . . . . . . . . . . . . . 548 16 - SVAYBV03
CEILING - LATERAL (B) covering panel. - ISLAND. • Please order always 2 lateral panels for 1 hood.• Finishes: glass (white, black, frosted Extralight white – dove-grey - coffee) / stain-
less steel (horizontally satin) / Corian® / mirror.• H min 600 / max 1200 mm.• Reversible.• Joining of frontal/lateral panel:• 1 = with overlay, for stainless steel finish.• 2 = 45° connection, for Corian® / Glass / Mirror finishes.
668 1616
B
H
30 1
2
L P H
P 700 - Price per square metre. - (Net weight 15,0 kg/m2).. . . . . . . . . . . . . . . . . . . . . . . . . . 696 16 - SVAYBV04
214 01/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s CEILING Hoods to be completed with finished covering panels.
Cut-out for lateral or rear air outlet. - For WALL-MOUNTED/ISLAND hood. • Hood H min 700 mm.• Please add the recirculating kit cod. AKIR001 or the externally venting kit cod.
AKIR002.
H
1200 / 1800
185= = 200= =
200
200
20030
668 1616
H
30
534 16
H
30
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZDICK01
Set of plate for air outlet - recirculating use. • To be ordered to transform the hood into recirculating version.• It includes the lateral closing grid and the 2 recirculating carbon filters.
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AKIR001
Set of plate for air outlet - externally vented use. • To be ordered when EXTERNALLY VENTED hood, with lateral or rear air outlet, is used.
• The set is useful for the external continuation of duct for the air outlet.
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AKIR002
CEILING - Upper cover with grate for WALL-MOUNTED hood - Optional. • Stainless steel.
L P H
L 1200 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 550 - AKIA001L 1800 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 550 - AKIA002
21501/2016
L = WidthP = DepthH = HeightPr = Price code
700 (550)
1200 - 1800
Ø 150
1
1
1
1
A
H 1600÷2000
H 2600÷3200
550
600÷1200
2600÷3200
1600÷2000
700 (550)
2
600
600
630
min
. 800
302210
1610600 1200 600
min
. 605
360 m
in. 7
2030
min
. 750
155
600 1200
DC
B
H 1600÷2000
H 2600÷3200
700
30
Specifications showing the hood positioning. 1 - Customised, variable vertical profiles, to adjust the hood height. 2 - With lateral outlet, H min 700 mm.
Specifications showing frontal view of hood aligned with wall units. C - Example of external fume outlet. D - Example of internal fume outlet.
H o o d s CEILING Technical details.
A - Use of hood under inclined ceiling: compensating structure supplied by the customer.
B - Use of island hood with ceiling H > 3200 mm: please use compensating structure supplied by Client.
216 01/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s GHOST Ceiling-mounted hoods in stainless steel and transparent glass. Structure made of painted metal, perimeter sides in stainless steel and panels in transparent extralight glass. Technical features: Controls: radio control. Motors: n° 1 Max capacity: 1250 m3/h Voltage: EUROPE 220 V - 50 Hz / USA 110 V - 60 Hz 3 speeds + turbo. Lighting: fluorescent 2 x 21 W (L 1200) - 2 x 28 W (L 1500) - 6 x 14 W (L 1000) Air outlet: Ø 150 mm, with reduction to Ø 120 mm. Pressure: max 580 Pa Noise level: 70 dBA Power: 190 W.
GHOST - Built-in EXTERNALLY VENTED hood. - WALL-MOUNTED. • Externally vented duct with sides in extra light transparent glass (3 sides).• Please order the kit cod. AKIR001 for transforming the hood into RECIRCULAT-
ING version (not recommended).• USA version: the single pieces are UL-certified (the assembled hood is not certi-
fied).
600
600
1200 / 1600
12001600
500
400 min.
L P H
Rectangular- L 1200 - EUROPE version. - (Net weight 118,0 kg / gross weight 156,0 kg). . . . . . . . . . . . . 1200 600 900 VATAHJ01Rectangular- L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 118,0 kg / gross weight 156,0 kg). 1200 600 900 VATCAJ01Rectangular- L 1200 - USA version. - (Net weight 118,0 kg / gross weight 156,0 kg).. . . . . . . . . . . . . . . . 1200 600 900 VATUHJ01Rectangular- L 1500 - EUROPE version. - (Net weight 123,0 kg / gross weight 161,0 kg). . . . . . . . . . . . . 1500 600 900 VATAHJ02Rectangular- L 1500 - EUROPE version - WITHOUT MOTOR. - (Net weight 123,0 kg / gross weight 161,0 kg). 1500 600 900 VATCAJ02Rectangular- L 1500 - USA version. - (Net weight 123,0 kg / gross weight 161,0 kg).. . . . . . . . . . . . . . . . 1500 600 900 VATUHJ02
GHOST - Built-in EXTERNALLY VENTED hood. - ISLAND. • Externally vented duct with sides in extra light transparent glass (4 sides).• Please order the kit cod. AKIR001 for transforming the hood into RECIRCULAT-
ING version (not recommended).• USA version: the single pieces are UL-certified (the assembled hood is not certi-
fied).
600
600
1500
1500
500
400 min.
1000 1000
1000
1000
500
400 min.
L P H
Rectangular- L 1500 - EUROPE version. - (Net weight 126,0 kg / gross weight 164,0 kg). . . . . . . . . . . . . 1500 600 900 VATAKJ01Rectangular- L 1500 - EUROPE version - WITHOUT MOTOR. - (Net weight 126,0 kg / gross weight 164,0 kg). 1500 600 900 VATCCJ01Rectangular- L 1500 - USA version. - (Net weight 126,0 kg / gross weight 164,0 kg).. . . . . . . . . . . . . . . . 1500 600 900 VATUKJ01Square - L 1000 - EUROPE version. - (Net weight 132,0 kg / gross weight 168,0 kg). . . . . . . . . . . . . . . . . 1000 1000 900 VATAKJ02Square - L 1000 - EUROPE version - WITHOUT MOTOR. - (Net weight 132,0 kg / gross weight 168,0 kg). . . . . 1000 1000 900 VATCCJ02Square - L 1000 - USA version. - (Net weight 132,0 kg / gross weight 168,0 kg).. . . . . . . . . . . . . . . . . . . . 1000 1000 900 VATUKJ02
21701/2016
L = WidthP = DepthH = HeightPr = Price code
5
4
12
A1
A
C
P
B
P
L
L
500
400 min.
254
36
Ø 150
254
1 - Structure: possible installation as per A / B modalities - Lateral, rear or upper fumes outlet (C). 2 - Mobile body with motor, filter and light. 3 - Telescopic device to move the hood upward and downward. 4 - Fumes duct in glass. 5 - False ceiling. 6 - Light.
Installation typologies: A - Ceiling-recessed assembly with covering panels to be supplied by the customer (A1). B - False ceiling-recessed assembly, supplied by the customer.
H o o d s GHOST Technical details.
218 01/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s TILE Hoods to be completed with tiled covering panels. Structure made of painted metal, with visible frame in stainless steel. Compatible with ceiling height from 2600 up to 3200 mm. The distance between floor and hood (lower ventilating part) should be min. 1800 and max. 2000 mm. Technical features: Controls: electronic push-button panel + radio control. Power: 300 W Max capacity: 1000 m3/h Voltage: EUROPE 220 V - 50 Hz / USA 110 V - 60 Hz 3 speeds + turbo. Lighting: fluorescent 2 x 21 W (L 1200) - 2 x 80 W (L 1800). Air outlet: Ø 150 mm with non-return valve, reduction to Ø 120 mm. Noise level: 61 dBA Pressure: 520 Pa
TILE - EXTERNALLY VENTED hood (WD88) - WALL-MOUNTED. • Perimeter ducting system.• Please order separately the covering panels.• USA version: the single pieces are UL-certified (the assembled hood is not certi-
fied).
==
==
1200 / 1800
Ø 150
465
600900
1200
L P H
H 600.L 1200 - EUROPE version. - (Net weight 68,3 kg / gross weight 83,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 465 600 VBBAHI01L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 68,3 kg / gross weight 83,3 kg).. . . . . . . . . 1200 465 600 VBBCAI01L 1200 - USA version. - (Net weight 68,3 kg / gross weight 83,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 465 600 VBBUHI01
L 1800 - EUROPE version. - (Net weight 101,5 kg / gross weight 121,5 kg). . . . . . . . . . . . . . . . . . . . . . . . 1800 465 600 VBBAHI04L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 101,5 kg / gross weight 121,5 kg).. . . . . . . 1800 465 600 VBBCAI04L 1800 - USA version. - (Net weight 101,5 kg / gross weight 121,5 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 465 600 VBBUHI04
H 900.L 1200 - EUROPE version. - (Net weight 73,4 kg / gross weight 88,4 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 465 900 VBBAHI02L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 73,4 kg / gross weight 88,4 kg).. . . . . . . . . 1200 465 900 VBBCAI02L 1200 - USA version. - (Net weight 73,4 kg / gross weight 88,4 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 465 900 VBBUHI02
L 1800 - EUROPE version. - (Net weight 109,6 kg / gross weight 129,6 kg). . . . . . . . . . . . . . . . . . . . . . . . 1800 465 900 VBBAHI05L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 109,6 kg / gross weight 129,6 kg).. . . . . . . 1800 465 900 VBBCAI05L 1800 - USA version. - (Net weight 109,6 kg / gross weight 129,6 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 465 900 VBBUHI05
H 1200.L 1200 - EUROPE version. - (Net weight 78,7 kg / gross weight 93,7 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 465 1200 VBBAHI03L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 78,7 kg / gross weight 93,7 kg).. . . . . . . . . 1200 465 1200 VBBCAI03L 1200 - USA version. - (Net weight 78,7 kg / gross weight 93,7 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 465 1200 VBBUHI03
L 1800 - EUROPE version. - (Net weight 111,3 kg / gross weight 131,3 kg). . . . . . . . . . . . . . . . . . . . . . . . 1800 465 1200 VBBAHI06L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 111,3 kg / gross weight 131,3 kg).. . . . . . . 1800 465 1200 VBBCAI06L 1800 - USA version. - (Net weight 111,3 kg / gross weight 131,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 465 1200 VBBUHI06
White (polished) Black (matt)
21901/2016
L = WidthP = DepthH = HeightPr = Price code
TILE - EXTERNALLY VENTED hood (WD88I) - ISLAND. • Perimeter ducting system.• Please order separately the covering panels.• USA version: the single pieces are UL-certified (the assembled hood is not certi-
fied).
==
==
1200 / 1800
Ø 150
630
6009001200
L P H
H 600.L 1200 - EUROPE version. - (Net weight 78,6 kg / gross weight 93,6 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 630 600 VBBAKI01L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 78,6 kg / gross weight 93,6 kg).. . . . . . . . . 1200 630 600 VBBCCI01L 1200 - USA version. - (Net weight 78,6 kg / gross weight 93,6 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 630 600 VBBUKI01
L 1800 - EUROPE version. - (Net weight 116,7 kg / gross weight 136,7 kg). . . . . . . . . . . . . . . . . . . . . . . . 1800 630 600 VBBAKI04L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 116,7 kg / gross weight 136,7 kg).. . . . . . . 1800 630 600 VBBCCI04L 1800 - USA version. - (Net weight 116,7 kg / gross weight 136,7 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 630 600 VBBUKI04
H 900.L 1200 - EUROPE version. - (Net weight 84,5 kg / gross weight 99,5 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 630 900 VBBAKI02L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 84,5 kg / gross weight 99,5 kg).. . . . . . . . . 1200 630 900 VBBCCI02L 1200 - USA version. - (Net weight 84,5 kg / gross weight 99,5 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 630 900 VBBUKI02
L 1800 - EUROPE version. - (Net weight 126,0 kg / gross weight 146,0 kg). . . . . . . . . . . . . . . . . . . . . . . . 1800 630 900 VBBAKI05L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 126,0 kg / gross weight 146,0 kg).. . . . . . . 1800 630 900 VBBCCI05L 1800 - USA version. - (Net weight 126,0 kg / gross weight 146,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 630 900 VBBUKI05
H 1200.L 1200 - EUROPE version. - (Net weight 90,5 kg / gross weight 105,5 kg). . . . . . . . . . . . . . . . . . . . . . . . . 1200 630 1200 VBBAKI03L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 90,5 kg / gross weight 105,5 kg).. . . . . . . . 1200 630 1200 VBBCCI03L 1200 - USA version. - (Net weight 90,5 kg / gross weight 105,5 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 630 1200 VBBUKI03
L 1800 - EUROPE version. - (Net weight 128,0 kg / gross weight 148,0 kg). . . . . . . . . . . . . . . . . . . . . . . . 1800 630 1200 VBBAKI06L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 128,0 kg / gross weight 148,0 kg).. . . . . . . 1800 630 1200 VBBCCI06L 1800 - USA version. - (Net weight 128,0 kg / gross weight 148,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 630 1200 VBBUKI06
H o o d s TILE Hoods to be completed with tiled covering panels.
220 01/2016
L = WidthP = DepthH = HeightPr = Price code
TILE - Set of tiled covering panels. - For WALL-MOUNTED hood. • Tile colours: white (polished) / black (matt).• The various tiles applied on the panels have decorative design and format differ-
ent from each other.• The panels are shipped separately, to allow an easier assembly. They have then to
be installed on the hood and plastered afterwards (plaster is included).• Thickness: 25 mm.• 1 frontal panel + 2 lateral panels.
L P H
H 600.L 1200. - (Net weight 46 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 465 600 SVBPBV01L 1800. - (Net weight 59 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 465 600 SVBPBV04
H 900.L 1200. - (Net weight 69 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 465 900 SVBPBV02L 1800. - (Net weight 88,5 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 465 900 SVBPBV05
H 1200.L 1200. - (Net weight 92 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 465 1200 SVBPBV03L 1800. - (Net weight 118 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 465 1200 SVBPBV06
H o o d s TILE Hoods to be completed with tiled covering panels.
TILE - Set of tiled covering panels. - For ISLAND hood. • Tile colours: white (polished) / black (matt).• The various tiles applied on the panels have decorative design and format differ-
ent from each other.• The panels are shipped separately, to allow an easier assembly. They have then to
be installed on the hood and plastered afterwards (plaster is included).• Thickness: 25 mm.• 2 frontal panels + 2 lateral panels.
L P H
H 600.L 1200. - (Net weight 79 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 630 600 SVBPBV51L 1800. - (Net weight 105 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 630 600 SVBPBV54
H 900.L 1200. - (Net weight 118,6 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 630 900 SVBPBV52L 1800. - (Net weight 157,5 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 630 900 SVBPBV55
H 1200.L 1200. - (Net weight 158,1 kg).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 630 1200 SVBPBV53L 1800. - (Net weight 210 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 630 1200 SVBPBV56
22101/2016
L = WidthP = DepthH = HeightPr = Price code
45015
0
15
Ø 150
1515
600
600600
1
H
B
630H 1800÷2000
H 2600÷3200
A
H 1800÷2000
H 2600÷3200
465
Specifications showing the hood positioning. 1 - 25 mm thick covering panels: 15 mm tile + 10 mm compounded aluminium. Each panel is a multiple width of 600 mm base unit.
H o o d s TILE Technical details - Hoods to be covered with tiled panels.
A - Use of hood under inclined ceiling: compensating structure supplied by the customer.
B - Use of island hood with ceiling H > 3200 mm: please use compensating structure supplied by Client.
222 01/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s TILE Hoods with covering panels in Wood / Wood Selection / Stainless steel / Corian®. Structure made of painted metal, with visible frame in stainless steel. Compatible with ceiling height from 2600 up to 3200 mm. The distance between floor and hood (lower ventilating part) should be min. 1800 and max. 2000 mm. Technical features: Controls: electronic push-button panel + radio control. Power: 300 W Max capacity: 1000 m3/h Voltage: EUROPE 220 V - 50 Hz / USA 110 V - 60 Hz 3 speeds + turbo. Lighting: fluorescent 2 x 14 W (L 900) - 2 x 80 W (L 1800). Air outlet: Ø 150 mm with non-return valve, reduction to Ø 120 mm. Noise level: 61 dBA Pressure: 520 Pa
TILE - EXTERNALLY VENTED hood (WD64) - WALL-MOUNTED. • Perimeter ducting system.• Covering panels on 1 frontal side and on 2 sides.• USA version: the single pieces are UL-certified (the assembled hood is not certi-
fied).
L 480
H
L P H
H 600.L 900 - EUROPE version. - (Net weight 54,4 kg / gross weight 62,1 kg). . . . . . . . . . . . . . . . . . . . . . . 900 480 600 VBXAH01L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 54,4 kg / gross weight 62,1 kg).. . . . . . 900 480 600 VBXCA01L 900 - USA version. - (Net weight 54,4 kg / gross weight 62,1 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . 900 480 600 VBXUH01
L 1200 - EUROPE version. - (Net weight 68,0 kg / gross weight 77,6 kg). . . . . . . . . . . . . . . . . . . . . . 1200 480 600 VBXAH02L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 68,0 kg / gross weight 77,6 kg).. . . . . 1200 480 600 VBXCA02L 1200 - USA version. - (Net weight 68,0 kg / gross weight 77,6 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 480 600 VBXUH02
L 1800 - EUROPE version. - (Net weight 98,0 kg / gross weight 113,0 kg). . . . . . . . . . . . . . . . . . . . . 1800 480 600 VBXAH03L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 98,0 kg / gross weight 113,0 kg).. . . . 1800 480 600 VBXCA03L 1800 - USA version. - (Net weight 98,0 kg / gross weight 113,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . 1800 480 600 VBXUH03
H 880.L 900 - EUROPE version. - (Net weight 65,0 kg / gross weight 73,0 kg). . . . . . . . . . . . . . . . . . . . . . . 900 480 880 VBXAH04L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 65,0 kg / gross weight 73,0 kg).. . . . . . 900 480 880 VBXCA04L 900 - USA version. - (Net weight 65,0 kg / gross weight 73,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . 900 480 880 VBXUH04
L 1200 - EUROPE version. - (Net weight 80,0 kg / gross weight 90,0 kg). . . . . . . . . . . . . . . . . . . . . . 1200 480 880 VBXAH05L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 80,0 kg / gross weight 90,0 kg).. . . . . 1200 480 880 VBXCA05L 1200 - USA version. - (Net weight 80,0 kg / gross weight 90,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 480 880 VBXUH05
L 1800 - EUROPE version. - (Net weight 114,3 kg / gross weight 129,3 kg). . . . . . . . . . . . . . . . . . . . 1800 480 880 VBXAH06L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 114,3 kg / gross weight 129,3 kg).. . . 1800 480 880 VBXCA06L 1800 - USA version. - (Net weight 114,3 kg / gross weight 129,3 kg). . . . . . . . . . . . . . . . . . . . . . . . 1800 480 880 VBXUH06
H 1160.L 900 - EUROPE version. - (Net weight 73,2 kg / gross weight 81,2 kg). . . . . . . . . . . . . . . . . . . . . . . 900 480 1160 VBXAH07L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 73,2 kg / gross weight 81,2 kg).. . . . . . 900 480 1160 VBXCA07L 900 - USA version. - (Net weight 73,2 kg / gross weight 81,2 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . 900 480 1160 VBXUH07
L 1200 - EUROPE version. - (Net weight 88,8 kg / gross weight 98,8 kg). . . . . . . . . . . . . . . . . . . . . . 1200 480 1160 VBXAH08L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 88,8 kg / gross weight 98,8 kg).. . . . . 1200 480 1160 VBXCA08L 1200 - USA version. - (Net weight 88,8 kg / gross weight 98,8 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 480 1160 VBXUH08
L 1800 - EUROPE version. - (Net weight 125,5 kg / gross weight 140,5 kg). . . . . . . . . . . . . . . . . . . . 1800 480 1160 VBXAH09L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 125,5 kg / gross weight 140,5 kg).. . . 1800 480 1160 VBXCA09L 1800 - USA version. - (Net weight 125,5 kg / gross weight 140,5 kg). . . . . . . . . . . . . . . . . . . . . . . . 1800 480 1160 VBXUH09
22301/2016
L = WidthP = DepthH = HeightPr = Price code
TILE - EXTERNALLY VENTED hood (WD64I) - ISLAND. • Perimeter ducting system.• Covering panels on 4 sides.• USA version: the single pieces are UL-certified (the assembled hood is not certi-
fied).
L 480
H
L P H
H 600.L 900 - EUROPE version. - (Net weight 65,6 kg / gross weight 74,6 kg). . . . . . . . . . . . . . . . . . . . . . . 900 480 600 VBXAK01L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 65,6 kg / gross weight 74,6 kg).. . . . . . 900 480 600 VBXCC01L 900 - USA version. - (Net weight 65,6 kg / gross weight 74,6 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . 900 480 600 VBXUK01
L 1200 - EUROPE version. - (Net weight 82,9 kg / gross weight 93,9 kg). . . . . . . . . . . . . . . . . . . . . . 1200 480 600 VBXAK02L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 82,9 kg / gross weight 93,9 kg).. . . . . 1200 480 600 VBXCC02L 1200 - USA version. - (Net weight 82,9 kg / gross weight 93,9 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 480 600 VBXUK02
L 1800 - EUROPE version. - (Net weight 120,0 kg / gross weight 136,0 kg). . . . . . . . . . . . . . . . . . . . 1800 480 600 VBXAK03L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 120,0 kg / gross weight 136,0 kg).. . . 1800 480 600 VBXCC03L 1800 - USA version. - (Net weight 120,0 kg / gross weight 136,0 kg). . . . . . . . . . . . . . . . . . . . . . . . 1800 480 600 VBXUK03
H 900.L 900 - EUROPE version. - (Net weight 80,0 kg / gross weight 89,0 kg). . . . . . . . . . . . . . . . . . . . . . . 900 480 900 VBXAK04L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 80,0 kg / gross weight 89,0 kg).. . . . . . 900 480 900 VBXCC04L 900 - USA version. - (Net weight 80,0 kg / gross weight 89,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . 900 480 900 VBXUK04
L 1200 - EUROPE version. - (Net weight 99,9 kg / gross weight 110,9 kg). . . . . . . . . . . . . . . . . . . . . 1200 480 900 VBXAK05L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 99,9 kg / gross weight 110,9 kg).. . . . 1200 480 900 VBXCC05L 1200 - USA version. - (Net weight 99,9 kg / gross weight 110,9 kg). . . . . . . . . . . . . . . . . . . . . . . . . 1200 480 900 VBXUK05
L 1800 - EUROPE version. - (Net weight 143,5 kg / gross weight 159,5 kg). . . . . . . . . . . . . . . . . . . . 1800 480 900 VBXAK06L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 143,5 kg / gross weight 159,5 kg).. . . 1800 480 900 VBXCC06L 1800 - USA version. - (Net weight 143,5 kg / gross weight 159,5 kg). . . . . . . . . . . . . . . . . . . . . . . . 1800 480 900 VBXUK06
H 1200.L 900 - EUROPE version. - (Net weight 92,0 kg / gross weight 101,0 kg). . . . . . . . . . . . . . . . . . . . . . 900 480 1200 VBXAK07L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 92,0 kg / gross weight 101,0 kg).. . . . . 900 480 1200 VBXCC07L 900 - USA version. - (Net weight 92,0 kg / gross weight 101,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 900 480 1200 VBXUK07
L 1200 - EUROPE version. - (Net weight 113,6 kg / gross weight 124,6 kg). . . . . . . . . . . . . . . . . . . . 1200 480 1200 VBXAK08L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 113,6 kg / gross weight 124,6 kg).. . . 1200 480 1200 VBXCC08L 1200 - USA version. - (Net weight 113,6 kg / gross weight 124,6 kg). . . . . . . . . . . . . . . . . . . . . . . . 1200 480 1200 VBXUK08
L 1800 - EUROPE version. - (Net weight 162,0 kg / gross weight 178,0 kg). . . . . . . . . . . . . . . . . . . . 1800 480 1200 VBXAK09L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 162,0 kg / gross weight 178,0 kg).. . . 1800 480 1200 VBXCC09L 1800 - USA version. - (Net weight 162,0 kg / gross weight 178,0 kg). . . . . . . . . . . . . . . . . . . . . . . . 1800 480 1200 VBXUK09
H o o d s TILE Hoods with covering panels in Wood / Wood Selection / Stainless steel / Corian®. Structure made of painted metal, with visible frame in stainless steel. Compatible with ceiling height from 2600 up to 3200 mm. The distance between floor and hood (lower ventilating part) should be min. 1800 and max. 2000 mm.
224 01/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s .KAPPA Hoods with covering panels in stainless steel. Hoods WITHOUT MOTOR for European market: the motor has to be added and can be selected among these codes EHLCI0002 /4 /5. Hoods WITHOUT MOTOR for US market: the remote motor has to be ordered by Client (the connection technical chart is provided). Technical features: Controls: electronic push-button panel + radio control (for island version only). Power: 300 W (USA 320 W) Max capacity: 1000 m3/h (USA 900 m3/h) Voltage: EUROPE 220 V - 50 Hz / USA 110 V - 60 Hz 3 speeds + turbo. Lighting: halogen 2 x 20 W (L 900) - 3 x 20 W (L 1200) wall-mounted / 4 x 20 W (L 900) - 6 x 20 W (L 1200) island. Air outlet: Ø 150 mm with non-return valve, reduction to Ø 120 mm. Noise level: 61 dBa (USA 71 dBA) Pressure: 520 Pa (USA 630 Pa)
.KAPPA - EXTERNALLY VENTED hood (WD95). - WALL-MOUNTED. • Covered by panels on 3 sides.• Max. height from floor: 1900 mm.• Perimeter ducting system.• USA version: the single pieces are UL-certified (the assembled hood is not certi-
fied).
600 / 880
500
900 / 1200
L P H
H 600.L 900 - EUROPE version. - (Net weight 35,0 kg / gross weight 42,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . 900 500 600 VBOAHI03L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 35,0 kg / gross weight 42,0 kg).. . . . . . . . . . 900 500 600 VBOCAI03L 900 - USA version. - (Net weight 35,0 kg / gross weight 42,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 500 600 VBOUHI03L 900 - USA version - WITHOUT MOTOR. - (Net weight 35,0 kg / gross weight 42,0 kg). . . . . . . . . . . . . . 900 500 600 VBOUAI03
L 1200 - EUROPE version. - (Net weight 47,6 kg / gross weight 54,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 500 600 VBOAHI04L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 47,6 kg / gross weight 54,3 kg).. . . . . . . . . 1200 500 600 VBOCAI04L 1200 - USA version. - (Net weight 47,6 kg / gross weight 54,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 500 600 VBOUHI04L 1200 - USA version - WITHOUT MOTOR. - (Net weight 47,6 kg / gross weight 54,3 kg). . . . . . . . . . . . . 1200 500 600 VBOUAI04
H 880.L 900 - EUROPE version. - (Net weight 38,0 kg / gross weight 45,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . 900 500 880 VBOAHI01L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 38,0 kg / gross weight 45,0 kg).. . . . . . . . . . 900 500 880 VBOCAI01L 900 - USA version. - (Net weight 38,0 kg / gross weight 45,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 500 880 VBOUHI01L 900 - USA version - WITHOUT MOTOR. - (Net weight 38,0 kg / gross weight 45,0 kg). . . . . . . . . . . . . . 900 500 880 VBOUAI01
L 1200 - EUROPE version. - (Net weight 50,6 kg / gross weight 57,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 500 880 VBOAHI02L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 50,6 kg / gross weight 57,3 kg).. . . . . . . . . 1200 500 880 VBOCAI02L 1200 - USA version. - (Net weight 50,6 kg / gross weight 57,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 500 880 VBOUHI02L 1200 - USA version - WITHOUT MOTOR. - (Net weight 50,6 kg / gross weight 57,3 kg). . . . . . . . . . . . . 1200 500 880 VBOUAI02
22501/2016
L = WidthP = DepthH = HeightPr = Price code
.KAPPA - EXTERNALLY VENTED hood (WD95I). - ISLAND. • Covered by panels on 4 sides.• Max. height from floor: 1900 mm.• Perimeter ducting system.• USA version: the single pieces are UL-certified (the assembled hood is not certi-
fied).
600 / 1000
600
900 / 1200
L P H
H 600.L 900 - EUROPE version. - (Net weight 38,8 kg / gross weight 56,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . 900 600 600 VBOAKI03L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 38,8 kg / gross weight 56,0 kg).. . . . . . . . . . 900 600 600 VBOCCI03L 900 - USA version. - (Net weight 38,8 kg / gross weight 56,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 600 600 VBOUKI03L 900 - USA version - WITHOUT MOTOR. - (Net weight 38,8 kg / gross weight 56,0 kg). . . . . . . . . . . . . . 900 600 600 VBOUCI03
L 1200 - EUROPE version. - (Net weight 60,0 kg / gross weight 71,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 600 600 VBOAKI04L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 60,0 kg / gross weight 71,0 kg).. . . . . . . . . 1200 600 600 VBOCCI04L 1200 - USA version. - (Net weight 60,0 kg / gross weight 71,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 600 600 VBOUKI04L 1200 - USA version - WITHOUT MOTOR. - (Net weight 60,0 kg / gross weight 71,0 kg). . . . . . . . . . . . . 1200 600 600 VBOUCI04
H 1000.L 900 - EUROPE version. - (Net weight 42,8 kg / gross weight 60,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . 900 600 1000 VBOAKI01L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 42,8 kg / gross weight 60,0 kg).. . . . . . . . . . 900 600 1000 VBOCCI01L 900 - USA version. - (Net weight 42,8 kg / gross weight 60,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 600 1000 VBOUKI01L 900 - USA version - WITHOUT MOTOR. - (Net weight 42,8 kg / gross weight 60,0 kg). . . . . . . . . . . . . . 900 600 1000 VBOUCI01
L 1200 - EUROPE version. - (Net weight 64,0 kg / gross weight 75,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 600 1000 VBOAKI02L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 64,0 kg / gross weight 75,0 kg).. . . . . . . . . 1200 600 1000 VBOCCI02L 1200 - USA version. - (Net weight 64,0 kg / gross weight 75,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 600 1000 VBOUKI02L 1200 - USA version - WITHOUT MOTOR. - (Net weight 64,0 kg / gross weight 75,0 kg). . . . . . . . . . . . . 1200 600 1000 VBOUCI02
H o o d s .KAPPA Hoods with covering panels in stainless steel. Hoods WITHOUT MOTOR for European market: the motor has to be added and can be selected among these codes EHLCI0002 /4 /5. Hoods WITHOUT MOTOR for US market: the remote motor has to be ordered by Client (the connection technical chart is provided).
.KAPPA - Internal exhaust conveyor for carrying the fumes outside. • It’s recommended to limit the noise arising from the possible vibrations of the covering panels.
• Compatible with wall-mounted or island hood.
L P H
For hood L 900 mm (art. K90095090KIT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AKIN001For hood L 1200 mm (art. K90095120KIT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AKIN002
226 01/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s LIEVE Stainless steel hoods with telescopic chimney. Hoods WITHOUT MOTOR for European market: the motor has to be added and can be selected among these codes EHLCI0002 /4 /5. Hoods WITHOUT MOTOR for US market: the remote motor has to be ordered by Client (the connection technical chart is provided). Technical features: Controls: electronic push-button panel + radio control (for island version only). Power: 300 W (USA 320 W) Max capacity: 1000 m3/h (USA 900 m3/h) Voltage: EUROPE 220 V - 50 Hz / USA 110 V - 60 Hz 3 speeds + turbo. Lighting: halogen 2 x 20 W (L 900) - 3 x 20 W (L 1200) - 4 x 20 W (L1800) wall-mounted / 4 x 20 W (L 900) - 6 x 20 W (L 1200) - 8 x 20 W (L1800) island. Air outlet: Ø 150 mm with non-return valve, reduction to Ø 120 mm. Noise level: 61 dBa (USA 71 dBA) Pressure: 520 Pa (USA 630 Pa) Voltage: EUROPE 220 V - 50 Hz / USA 120 V - 60 Hz
LIEVE - EXTERNALLY VENTED hood (WD62). - WALL-MOUNTED. • Telescopic chimney.• Perimeter ducting system.• USA version: the single pieces are UL-certified (the assembled hood is not certi-
fied).
50
290
500
900 / 1200 / 1800
600 / 1000800 / 1200
290
L P H
Adjustable chimney: H 600÷1000 mm.L 900 - EUROPE version. - (Net weight 27,0 kg / gross weight 33,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . 900 500 1000 VSTAHI04L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 27,0 kg / gross weight 33,0 kg).. . . . . . . . . . 900 500 1000 VSTCAI04L 900 - USA version. - (Net weight 27,0 kg / gross weight 33,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 500 1000 VSTUHI04L 900 - USA version - WITHOUT MOTOR. - (Net weight 27,0 kg / gross weight 33,0 kg). . . . . . . . . . . . . . 900 500 1000 VSTUAI04
L 1200 - EUROPE version. - (Net weight 33,5 kg / gross weight 40,5 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 500 1000 VSTAHI05L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 33,5 kg / gross weight 40,5 kg).. . . . . . . . . 1200 500 1000 VSTCAI05L 1200 - USA version. - (Net weight 33,5 kg / gross weight 40,5 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 500 1000 VSTUHI05L 1200 - USA version - WITHOUT MOTOR. - (Net weight 33,5 kg / gross weight 40,5 kg). . . . . . . . . . . . . 1200 500 1000 VSTUAI05
L 1800 - EUROPE version. - (Net weight 46,3 kg / gross weight 56,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1800 500 1000 VSTAHI06L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 46,3 kg / gross weight 56,3 kg).. . . . . . . . . 1800 500 1000 VSTCAI06L 1800 - USA version. - (Net weight 46,3 kg / gross weight 56,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 500 1000 VSTUHI06L 1800 - USA version - WITHOUT MOTOR. - (Net weight 46,3 kg / gross weight 56,3 kg). . . . . . . . . . . . . 1800 500 1000 VSTUAI06
Adjustable chimney: H 800÷1200 mm.L 900 - EUROPE version. - (Net weight 27,0 kg / gross weight 33,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . 900 500 1200 VSTAHI01L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 27,0 kg / gross weight 33,0 kg).. . . . . . . . . . 900 500 1200 VSTCAI01L 900 - USA version. - (Net weight 27,0 kg / gross weight 33,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 500 1200 VSTUHI01L 900 - USA version - WITHOUT MOTOR. - (Net weight 27,0 kg / gross weight 33,0 kg). . . . . . . . . . . . . . 900 500 1200 VSTUAI01
L 1200 - EUROPE version. - (Net weight 33,5 kg / gross weight 40,5 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 500 1200 VSTAHI02L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 33,5 kg / gross weight 40,5 kg).. . . . . . . . . 1200 500 1200 VSTCAI02L 1200 - USA version. - (Net weight 33,5 kg / gross weight 40,5 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 500 1200 VSTUHI02L 1200 - USA version - WITHOUT MOTOR. - (Net weight 33,5 kg / gross weight 40,5 kg). . . . . . . . . . . . . 1200 500 1200 VSTUAI02
L 1800 - EUROPE version. - (Net weight 46,3 kg / gross weight 56,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1800 500 1200 VSTAHI03L 1800 - EUROPE version - WITHOUT MOTOR. - (Net weight 46,3 kg / gross weight 56,3 kg).. . . . . . . . . 1800 500 1200 VSTCAI03L 1800 - USA version. - (Net weight 46,3 kg / gross weight 56,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 500 1200 VSTUHI03L 1800 - USA version - WITHOUT MOTOR. - (Net weight 46,3 kg / gross weight 56,3 kg). . . . . . . . . . . . . 1800 500 1200 VSTUAI03
22701/2016
L = WidthP = DepthH = HeightPr = Price code
LIEVE - EXTERNALLY VENTED hood (WD62I). - ISLAND. • Telescopic chimney.• Perimeter ducting system.• USA version: the single pieces are UL-certified (the assembled hood is not certi-
fied).
50
290
600900 / 1200 / 1500
740 / 10001000 / 1200
330
L P H
Adjustable chimney: H 740÷1000 mm.L 900 - EUROPE version. - (Net weight 36,0 kg / gross weight 43,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . 900 600 1000 VSTAKI04L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 36,0 kg / gross weight 43,0 kg).. . . . . . . . . . 900 600 1000 VSTCCI04L 900 - USA version. - (Net weight 36,0 kg / gross weight 43,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 600 1000 VSTUKI04L 900 - USA version - WITHOUT MOTOR. - (Net weight 36,0 kg / gross weight 43,0 kg). . . . . . . . . . . . . . 900 600 1000 VSTUCI04
L 1200 - EUROPE version. - (Net weight 43,6 kg / gross weight 51,6 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 600 1000 VSTAKI05L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 43,6 kg / gross weight 51,6 kg).. . . . . . . . . 1200 600 1000 VSTCCI05L 1200 - USA version. - (Net weight 43,6 kg / gross weight 51,6 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 600 1000 VSTUKI05L 1200 - USA version - WITHOUT MOTOR. - (Net weight 43,6 kg / gross weight 51,6 kg). . . . . . . . . . . . . 1200 600 1000 VSTUCI05
L 1500 - EUROPE version. - (Net weight 51,3 kg / gross weight 60,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1500 600 1000 VSTAKI06L 1500 - EUROPE version - WITHOUT MOTOR. - (Net weight 51,3 kg / gross weight 60,3 kg).. . . . . . . . . 1500 600 1000 VSTCCI06L 1500 - USA version. - (Net weight 51,3 kg / gross weight 60,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 600 1000 VSTUKI06L 1500 - USA version - WITHOUT MOTOR. - (Net weight 51,3 kg / gross weight 60,3 kg). . . . . . . . . . . . . 1500 600 1000 VSTUCI06
Adjustable chimney: H 1000÷1200 mm.L 900 - EUROPE version. - (Net weight 36,0 kg / gross weight 43,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . 900 600 1200 VSTAKI01L 900 - EUROPE version - WITHOUT MOTOR. - (Net weight 36,0 kg / gross weight 43,0 kg).. . . . . . . . . . 900 600 1200 VSTCCI01L 900 - USA version. - (Net weight 36,0 kg / gross weight 43,0 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 600 1200 VSTUKI01L 900 - USA version - WITHOUT MOTOR. - (Net weight 36,0 kg / gross weight 43,0 kg). . . . . . . . . . . . . . 900 600 1200 VSTUCI01
L 1200 - EUROPE version. - (Net weight 43,6 kg / gross weight 51,6 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1200 600 1200 VSTAKI02L 1200 - EUROPE version - WITHOUT MOTOR. - (Net weight 43,6 kg / gross weight 51,6 kg).. . . . . . . . . 1200 600 1200 VSTCCI02L 1200 - USA version. - (Net weight 43,6 kg / gross weight 51,6 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 600 1200 VSTUKI02L 1200 - USA version - WITHOUT MOTOR. - (Net weight 43,6 kg / gross weight 51,6 kg). . . . . . . . . . . . . 1200 600 1200 VSTUCI02
L 1500 - EUROPE version. - (Net weight 51,3 kg / gross weight 60,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . 1500 600 1200 VSTAKI03L 1500 - EUROPE version - WITHOUT MOTOR. - (Net weight 51,3 kg / gross weight 60,3 kg).. . . . . . . . . 1500 600 1200 VSTCCI03L 1500 - USA version. - (Net weight 51,3 kg / gross weight 60,3 kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 600 1200 VSTUKI03L 1500 - USA version - WITHOUT MOTOR. - (Net weight 51,3 kg / gross weight 60,3 kg). . . . . . . . . . . . . 1500 600 1200 VSTUCI03
H o o d s LIEVE Stainless steel hoods with telescopic chimney. Hoods WITHOUT MOTOR for European market: the motor has to be added and can be selected among these codes EHLCI0002 /4 /5. Hoods WITHOUT MOTOR for US market: the remote motor has to be ordered by Client (the connection technical chart is provided).
228 01/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s DD1-F FLUSH-MOUNTED totally concealed hood in stainless steel, for island or peninsula compositions. US version: hood with all technical specifications for US market (not certified). Hoods WITHOUT MOTOR for European market: the motor has to be added and can be selected among these codes EHLCI0002 /4 /5. Hoods WITHOUT MOTOR for US market: the remote motor has to be ordered by Client (the connection technical chart is provided). In case of Client’s covering panels use please order the relative assembly kit. Technical features: Controls: touch control (for ascending and descending) - electronic (for suction and lighting) + radio control. Nr. of motors: 1 - Suction: 4 speeds Anti-crashing safety device, when hood descends. Max pressure: 600 Pa Noise level: 67 dBA Max electric absorption: 145 W Max capacity: 800 m3/h Lighting: LED bar - 10 W Voltage: EUROPE 220 V - 50 Hz / USA 120 V - 60 Hz Fume outlet: ø 150 mm ( 220 x 90 mm with optional connection AKOH001 )
DD1-F - EXTERNALLY VENTED hood (WD41). • Please order separately the covering panel VDFBU*01/02, in the desired finish.• Please add the specific flush-mounted cut-out on top cod. ZNAB15 / etc.• For conversion into recirculating working please order the optional kit AKIC038 / 42.• USA version: the single pieces are UL-certified (the assembled hood is not certi-
fied).
751
0 - 5
04
R 10
123361 - 511
210
361 - 511
L P H
L 750 - For base unit L 900 mm.EUROPE version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750 210 751 VDFAKI01EUROPE version - WITHOUT MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750 210 751 VDFCCI01USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750 210 751 VDFUKI01USA version - WITHOUT MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750 210 751 VDFUCI01
L 1050 - For base unit L 1200 mm.EUROPE version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050 210 751 VDFAKI02EUROPE version - WITHOUT MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050 210 751 VDFCCI02USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050 210 751 VDFUKI02USA version - WITHOUT MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050 210 751 VDFUCI02
22901/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s DD1-F FLUSH-MOUNTED totally concealed hood in stainless steel, for island or peninsula compositions. US version: hood with all technical specifications for US market (not certified). Hoods WITHOUT MOTOR for European market: the motor has to be added and can be selected among these codes EHLCI0002 /4 /5. Hoods WITHOUT MOTOR for US market: the remote motor has to be ordered by Client (the connection technical chart is provided). In case of Client’s covering panels use please order the relative assembly kit.
DD1-F flush-mounted cut-out. • The price includes the cut-out for hood and the stainless steel frame (only for worktops in laminate, Lasermat, wood, stainless steel).
L P H
For worktop in Corian® - 750/1050 mm hood.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNAB15For worktop in Laminate, Lasermat, wood - 750 mm hood.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNAB17For worktop in Laminate, Lasermat, wood - 1050 mm hood.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNAB18For worktop in stainless steel - 750 mm hood.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNAB19For worktop in stainless steel - 1050 mm hood.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNAB20For worktop in Durinox® - 750 mm hood. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNAB23For worktop in Durinox® - 1050 mm hood. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNAB24For worktop in Stone, Marble, Granite, Composite - 750/1050 mm hood.. . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNAB16
DD1-F rectangular connection for air outlet, 220 x 90 mm. • Necessary for side B or C outlet.
L P H
For EU / USA version, with or without motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AKOH001
optional 220 x 90 mm
standard Ø 150 mm
A
C
B
DD1-F covering panel for hood in finish. • The panel is delivered glued to the hood.• The price of panel in stone, marble, granite, composite is unique and equal for all
range options (Stone A-B-C-D-E).• NOT FEASIBLE in Laminate, Lasermat and Wood: for use on worktops in these
finishes the covering panel could be in stainless steel.
R 10
750 - 1050
111
For 750 mm hood. L P H
Corian®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750 111 6 VDFBUR01Polished stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750 111 2 VDFBUB01Matt satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750 111 2 VDFBUS01C.R.S. Scotch Brite stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750 111 2 VDFBUC01Durinox®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750 111 3 VDFBUD01Stone, Marble, Granite, Composite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750 111 10 VDFBUT01Installation kit for covering panel for hood by Client. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AKIS002
For 1050 mm hood.Corian®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050 111 6 VDFBUR02Polished stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050 111 2 VDFBUB02Matt satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050 111 2 VDFBUS02C.R.S. Scotch Brite stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050 111 2 VDFBUC02Durinox®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050 111 3 VDFBUD02Stone, Marble, Granite, Composite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050 111 10 VDFBUT02Installation kit for covering panel for hood by Client. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AKIS003
230 01/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s DD1-F Technical details.
751
0 - 5
04
R 10
123361 - 511
210
361 - 511
*
750 - 1050
111
optional 220 x 90 mm
standard Ø 150 mm
A
C
B
EXTERNALLY VENTED hood to be installed only on specific units ( L 900 - 1200 mm ), arranged for hood fixing and housing. Electronic mechanism for ascending and descending. It can be transformed into RECIRCULATING version using the optional filter kit cod. AKIC038/42 (please see the filter chart). Inside structure made of metal sheets, painted with epoxy powders. Duct system can be made with common Ø 150 mm. ducts (220 x 90 mm. rectangular ducts with optional connection AKOH001) available on the market, not supplied by Boffi.
Hood covering panel finishes: 1 - white Corian® 2 - polished stainless steel 3 - matt satin stainless steel 4 - C.R.S. Scotch Brite stainless steel 5 - Stone, Marble, Granite, Composite. 7 - Durinox®
Duct example for EXTERNALLY VENTED hood use.
- External fume outlet. - duct for the fume outlet positioned under the units, in the plinth area. - Plinth height min. 120 mm.
Duct example for RECIRCULATING hood use.
- Fume outlet inside the kitchen. - Please order separately the filter kit AKIC038/42 (please see the filter chart) - Add always the plinth cut-out code ZZIDB01.
* = Frame in stainless steel, necessary for the hood installation on worktops in laminate, Lasermat, wood and stainless steel. It’s included in the specific flush-mounted cut-out on top. The frame is not necessary when the hoods are installed on worktops in Corian®, marble, stone, granite or composite.
Fume outlet: available, during installation, in three different directions (low, right or left). Outlet kit: as default Ø 150 mm. kit is supplied (direction A - for fume outlet downward). Please order separately the rectangular connection AKOH001 (220 x 90 mm), only If - during the installa-tion - the motor has to be rotated for having the left - B - or right - C - outlet.
min 120
23101/2016
L = WidthP = DepthH = HeightPr = Price code
PP2
H
P1 = 625min. 60
PP2P1 =
345
1
H
min. 60
900 / 1200
345405 (K14)495 (K20)625
625750 (K14)
9801175 (K14)1200 (K20)1260
PP2P1 =
345 / 405 / 495
H
min. 60
PP2
H
P1 = 625
1
min. 60
The base units with depth P1=345 mm have fixed front panels and, when the motor is turned to hob side, have to be adjacent to base units with cut-out (1) for removable back panel (to work on hood).For compositions of base units (P1 = 345 mm) + (P2 = 625 mm) > Worktop P = 980 mm.
The DD1-F hood must have the motor turned to external side in the 405 mm. deep (P1) base units of k14.For compositions of base units (P1 = 405 mm) + (P2 = 750 mm) > Worktop P = 1175 mm (Norbert Wangen K14).
Technical features of specific base units for DD1-F hoods - Island / peninsula compositions.
Specific base units Programma STANDARD (height 660 mm not feasible), APRILE, XILA, K14, K20: to be ordered separately (please see the relative chapters). Specific inside setting for DD1-F hood fixing.On all specific units for DD1-F hood the SERVO-DRIVE electrical opening device cannot be installed.
Positioning of DD1-F hood inside base units.
DESIGN INSTRUCTIONS:- For EXTERNALLY VENTED version: the plinth has to be higher than 120 mm, to allow the ducting. When an island kitchen is not installed adjacent to the wall and conse-quently the outlet cannot be positioned on the same wall, please arrange a basement for the composition, in order to contain the needed ducts. Alternatively it’s possible to use the recirculating hood.- For RECIRCULATING version: please order the optional filter kit AKIC038/42 (please see the filter chart) to convert the hood into recirculating model and add always the plinth cut-out for the filtered air expulsion, code ZZIDB0.- All hobs with max. depth of 580 mm. can be used. Hobs with very low depth (i.e. 400 mm) may cause a performance decrease due to the distance between hood (its position is fixed for technical reasons) and hob.- Base unit H 720 mm with worktop min. thick 40 mm / max. thick 110 mm.- Base unit H 790 mm with worktop min. thick 12 mm / max. thick 110 mm.- Base unit H 852 mm with worktop min. thick 12 mm / max. thick 110 mm.
The base units with depth P1=625 mm have a useful inside compartment with reduced depth, shelf (2 shelves for 790 or 852 mm. high units ) and remov-able back panel (to work on hood).For compositions of base units (P1 = 625 mm) + (P2 = 625 mm) > Worktop P = 1260 mm.
H o o d s DD1-F Technical details.
232 01/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s REMOTE MOTORS Remote motors for externally vented hoods, WITHOUT MOTOR. Please check always the feasibility of compatibilities different from the indicated ones.
Remote motor, EXTERNAL USE - EUROPE version. - For FLAT - GLASS hood. • Protection carter in stainless steel.• Voltage: 230 V - 50 Hz.• Max absorbed power: 190 W• Capacity: min 380 m3/h - max 1000 m3/h.• Pressure: min 280 Pa - max 630 Pa.• Compatible with hood push-button panel On-Off (1 speed).
427
440 445 170171
Ø 150
Ø 150
536480
L P H
Mod. GME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - EHLCI0001
Remote motor, EXTERNAL USE - EUROPE version. - For CEILING - TILE - GHOST - DD1-F - .KAPPA - LIEVE - DOWNDRAFT K20 hood.
• Protection carter in stainless steel.• Voltage: 230 V - 50 Hz.• Max absorbed power: 190 W• Capacity: min 450 m3/h - middle 750 m3/h - max 950 m3/h.• Pressure: min 360 Pa - middle 530 Pa - max 580 Pa.• Noise level: min 58 dBa - middle 70 dBa - max 74 dBa.• Compatible with hood push-button panel (adjustable speed).
400
193,5
540,
6
Ø15
2
Ø 148
472472
L P H
WALL USE, VERTICALLY MOUNTEDMod. K0636CEV + cable AK2600055. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - EHLCI0004
MOUNTED ON INCLINED OR LEVEL SURFACEMod. K0636CEE + cable AK2600055. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - EHLCI0005
Remote motor, EXTERNAL USE - USA version. - For CEILING - TILE - GHOST - DD1-F - .KAPPA - LIEVE - DOWNDRAFT K20 hood.
• Protection carter in stainless steel.• Voltage: 120 V - 60 Hz.• Max absorbed power: 430 W• Capacity: min 370 m3/h - middle 780 m3/h - max 1040 m3/h.• Pressure: min 470 Pa - middle 650 Pa - max 670 Pa.• Noise level: min 55 dBa - middle 71 dBa - max 76 dBa.• Compatible with hood push-button panel (adjustable speed).• The single pieces are UL-certified (the assembled motor is not certified).
25
344
151 161
Ø15092
270
321 270
L P H
WALL USE, VERTICALLY MOUNTEDMod. K697/1 + cable AK2600055. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - EHLCI006
23301/2016
L = WidthP = DepthH = HeightPr = Price code
H o o d s REMOTE MOTORS Remote motors for externally vented hoods, WITHOUT MOTOR. Please check always the feasibility of compatibilities different from the indicated ones.
Built-in remote motor, INTERNAL USE - EUROPE version. - For CEILING - TILE - GHOST - DD1-F - .KAPPA - LIEVE - DOWNDRAFT K20 hood.
• Protection carter in metal shhet, white painted.• Voltage: 230 V - 50 Hz.• Max absorbed power: 260 W• Capacity: min 270 m3/h - middle 520 m3/h - max 700 m3/h.Pressure: min 300 Pa
- middle 430 Pa - max 460 Pa.• Noise level: min 47 dBa - middle 63 dBa - max 69 dBa.• Compatible with hood push-button panel (adjustable speed).
Ø 150
387
29Ø 150
163,5
128
306
255,8
327
367,8
369
L P H
Mod. K0639CEI + cable AK2600055. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - EHLCI0002
Built-in remote motor, INTERNAL USE - USA version. - For CEILING - TILE - GHOST - DD1-F - .KAPPA - LIEVE - DOWNDRAFT K20 hood.
• Protection carter in metal shhet, white painted.• Voltage: 120 V - 60 Hz.• Max absorbed power: 430 W• Capacity: min 370 m3/h - middle 780 m3/h - max 1040 m3/h.Pressure: min 470
Pa - middle 650 Pa - max 670 Pa.• Noise level: min 55 dBa - middle 71 dBa - max 76 dBa.• Compatible with hood push-button panel (adjustable speed).• The single pieces are UL-certified (the assembled motor is not certified).
Ø 150
387
29
Ø 150
163,5
128
306
255,8
327
367,8
369
L P H
Mod. ASK639 + cable AK2600055. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - EHLCI007
234 01/2016
L = WidthP = DepthH = HeightPr = Price code
A c c e s s o r i e s DRAWER ACCESSORIES - DOMESTICI series Use examples. MOVE system: the placing of the single parts constituting the accessory is very flexible, it’s possible to choose their type and position, directly on the internal drawer mat or on the optional wood bottom.
1116
1 23 45
MOVE
472
1 23 45
1116
1 23 45
472
1116
1 23 45
MOVE
472
MOVE
+
+
+
473
1200
1116
23501/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Cutlery tray L 600 mm.
• MOVE system.• For drawer L 600 mm.• Multipurpose element (compatible with accessories 1-2-3-4-5) + set of small
boxes (1 with divider, 1 without divider) + 2 clips (to fasten the single parts).• H 43 mm.
516
472
1 23 45
MOVE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY106
DOMESTICI - Cutlery tray with knives holder L 600 mm.
• MOVE system.• For drawer L 600 mm.• Multipurpose element with knives holder (C) + set of small boxes (1 with divider,
1 without divider) + 2 clips (to fasten the single parts).• H 43 mm.
516
472
MOVE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY107
A c c e s s o r i e s DRAWER ACCESSORIES - DOMESTICI series Complete kits, for LEGRABOX drawers. Accessories in black-dyed ash wood. For units P 625 mm.
• The DOMESTICI accessories are laid inside the drawer. • All accessories are compatible also with internal drawers. • MOVE system: the placing of the single parts constituting the accessory is very flexible, it’s possible to choose their
type and position, directly on the internal drawer mat or on the optional wood bottom.
DOMESTICI - Cutlery tray L 900 mm.
• MOVE system.• For drawer L 900 mm.• Multipurpose element (compatible with accessories 1-2-3-4-5) + 2 sets of small
boxes (2 with divider, 2 without divider) + 4 clips (to fasten the single parts).• H 43 mm.
816
472
1 23 45
MOVE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY108
DOMESTICI - Cutlery tray with knives holder L 900 mm.
• MOVE system.• For drawer L 900 mm.• Multipurpose element with knives holder (C) + 2 sets of small boxes (2 with
divider, 2 without divider) + 4 clips (to fasten the single parts).• H 43 mm.
816
472
MOVE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY109
Technical chart for inside useful sizes - LEGRABOX drawers and internal drawers.
450 900 1200
816516
600
366
300
47
3
47
3
47
3
47
3
47
3
1116216
= = = = =
236 01/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Cutlery tray L 1200 mm.
• MOVE system.• For drawer L 1200 mm.• Multipurpose element (compatible with accessories 1-2-3-4-5) + cutlery holder
element + 2 sets of small boxes (2 with divider, 2 without divider) + 4 clips (to fasten the single parts).
• H 43 mm.
1116
472
1 23 45
MOVE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY110
DOMESTICI - Cutlery tray with knives holder L 1200 mm.
• MOVE system.• For drawer L 1200 mm.• Multipurpose element with cutlery + knives holder (C) + 2 sets of small boxes (2
with divider, 2 without divider) + 4 clips (to fasten the single parts).• H 43 mm.
1116
472
MOVE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY111
A c c e s s o r i e s DRAWER ACCESSORIES - DOMESTICI series Complete kits, for LEGRABOX drawers. Accessories in black-dyed ash wood. For units P 625 mm.
23701/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Smooth bottom L 300 mm.
• MOVE system.• For drawer L 300 mm.• H 13 mm.
216
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY104
DOMESTICI - Smooth bottom L 450 mm.
• MOVE system.• For drawer L 450 mm.• H 13 mm.
366
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY118
DOMESTICI - Smooth bottom L 600 mm.
• MOVE system.• For drawer L 600 mm.• H 13 mm.
516
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY119
DOMESTICI - Smooth bottom L 900 mm.
• MOVE system.• For drawer L 900 mm.• H 13 mm.
816
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY120
DOMESTICI - Smooth bottom L 1200 mm.
• MOVE system.• For drawer L 1200 mm.• H 13 mm.
1116
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY121
A c c e s s o r i e s DRAWER ACCESSORIES - DOMESTICI series Modular elements, for LEGRABOX drawers. Accessories in black-dyed ash wood. For units P 625 mm.
238 01/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Multipurpose element (B) with knives holder (1). - C
• MOVE system.• H 43 mm.
150
472
43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC029
DOMESTICI - Multipurpose element (B) with film dispenser (2). - D
• MOVE system.• H 43 mm.
150
472
43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC030
DOMESTICI - Multipurpose element (B) with coffee pods holder (3). - E
• MOVE system.• H 43 mm.
150
472
43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC031
DOMESTICI - Multipurpose element (B) with spice holder (4). - F
• MOVE system.• H 43 mm.
150
472
43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC032
DOMESTICI - Multipurpose element. - B
• MOVE system.• The accessories 1-2-3-4-5 can be laid inside.• H 43 mm.
150
472
43
1 23 45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC028
A c c e s s o r i e s DRAWER ACCESSORIES - DOMESTICI series Modular elements, for LEGRABOX drawers. Accessories in black-dyed ash wood. For units P 625 mm.
DOMESTICI - Set of small boxes. - A
• MOVE system.• Set composed of 2 cutlery trays / trays (1 with divider, 1 without divider) + 2 clips
(to fasten the single parts).• H 43 mm.
118
43
300
118
43+
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC023
+ +
+ +
23901/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Element with handles. - H
• MOVE system.• To be laid inside.• Thanks to the handles it can be used as freestanding (outside the drawer itself).• H 50 mm.
200
472
50
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC001
A c c e s s o r i e s DRAWER ACCESSORIES - DOMESTICI series Modular elements, for LEGRABOX drawers. Accessories in black-dyed ash wood. For units P 625 mm.
DOMESTICI - Multipurpose element (B) with divider (5). - G
• MOVE system.• H 43 mm.
150
472
43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC033
DOMESTICI - Knives holder. - 1
• MOVE system.• To be laid inside the multipurpose element (B).• H 26 mm.
138
472
26
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC014
DOMESTICI - Film dispenser. - 2
• MOVE system.• To be laid inside the multipurpose element (B).• H 38 mm.
138
38
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC015
DOMESTICI - Chopping board for bread with handles. - L
• MOVE system.• To be laid inside.• Thanks to the handles it can be used as freestanding (outside the drawer itself).• Chopping board in smoked oak.• H 50 mm.
200
472
50
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC005
DOMESTICI - Cutlery tray element. - K
• MOVE system.• H 43 mm.
300
472
43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC024
+
240 01/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Coffee pods holder. - 3
• MOVE system.• To be laid inside the multipurpose element (B).• H 31 mm.
138
31
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC016
DOMESTICI - Spice holder. - 4
• MOVE system.• To be laid inside the multipurpose element (B).• H 26 mm.
138
26
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC017
A c c e s s o r i e s DRAWER ACCESSORIES - DOMESTICI series Modular elements, for LEGRABOX drawers. Accessories in black-dyed ash wood. For units P 625 mm.
DOMESTICI - Divider. - 5
• MOVE system.• To be laid inside the multipurpose element (B).• H 38 mm.
138
472
38
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC022
24101/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Storage element L 600 mm.
• For heavy-duty drawer L 600 mm.• 2 fixed dividers.• Compatible with R-U-V accessories.• H 139 mm.
516
472259
R U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY092
• The DOMESTICI accessories are laid inside the heavy-duty drawer.
DOMESTICI - Storage element L 900 mm.
• For heavy-duty drawer L 900 mm.• 3 fixed dividers.• Compatible with R-U-V accessories.• H 139 mm.
816
472401
R U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY093
DOMESTICI - Storage element L 1200 mm.
• For heavy-duty drawer L 1200 mm.• 3 fixed dividers.• Compatible with R-U-V accessories.• H 139 mm.
1116
472699
R U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY094
DOMESTICI - Plate rack L 600 mm.
• For heavy-duty drawer L 600 mm.• Pre-punched bottom.• 4 flexible cross dividers.• Compatible with R-S-T-U-V accessories.• H 139 mm.
516
472
R S T U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY095
A c c e s s o r i e s DRAWER ACCESSORIES - DOMESTICI series Complete kits, for LEGRABOX heavy-duty drawers. Accessories in black-dyed ash wood. For units P 625 mm.
242 01/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Plate rack L 900 mm.
• For heavy-duty drawer L 900 mm.• Pre-punched bottom.• 5 movable dividers.• Compatible with R-S-T-U-V accessories.• H 139 mm.
816
472
R S T U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY096
A c c e s s o r i e s DRAWER ACCESSORIES - DOMESTICI series Complete kits, for LEGRABOX heavy-duty drawers. Accessories in black-dyed ash wood. For units P 625 mm.
DOMESTICI - Plate rack L 1200 mm.
• For heavy-duty drawer L 1200 mm.• Pre-punched bottom.• 7 flexible cross dividers.• Compatible with R-S-T-U-V accessories.• H 139 mm.
1116
472
R S T U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY097
DOMESTICI - Storage element with lid and holder for oil bottle L 900 mm.
• For heavy-duty drawer L 900 mm.• 3 fixed dividers + lid with handle + divider kit and tray for oil bottle.• Compatible with R-U-V accessories.• H 139 mm.
816
472401
R U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY062
DOMESTICI - Storage element with lid and holder for oil bottle L 1200 mm.
• For heavy-duty drawer L 1200 mm.• 3 fixed dividers + lid with handle + divider kit and tray for oil bottle.• Compatible with R-U-V accessories.• H 139 mm.
1116
472699
R U V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY063
DOMESTICI - Storage element with holder for wine decanter L 600 mm.
• For heavy-duty drawer L 600 mm.• Pre-punched bottom.• H 139 mm.
516
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY064
DOMESTICI - Storage element with holder for glasses L 600 mm.
• For heavy-duty drawer L 600 mm.• Pre-punched bottom.• H 139 mm.
516
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY065
24301/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Storage element with holder for wine decanter and glasses L 900 mm.
• For heavy-duty drawer L 900 mm.• Pre-punched bottom.• H 139 mm.
816
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY066
A c c e s s o r i e s DRAWER ACCESSORIES - DOMESTICI series Complete kits, for LEGRABOX heavy-duty drawers. Accessories in black-dyed ash wood. For units P 625 mm.
DOMESTICI - Storage element with holder for wine decanter and glasses L 1200 mm.
• For heavy-duty drawer L 1200 mm.• Pre-punched bottom.• H 139 mm.
1116
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY067
DOMESTICI - Storage element with holder for pot lids L 600 mm.
• For heavy-duty drawer L 600 mm.• Pre-punched bottom.• Equipped with set of buffers (anti-slip / noise-reducing).• Noise-reducing felt coating in the space for lids.• H 139 mm.
516
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY068
DOMESTICI - Storage element with holder for pot lids L 900 mm.
• For heavy-duty drawer L 900 mm.• Pre-punched bottom.• Equipped with set of buffers (anti-slip / noise-reducing).• Noise-reducing felt coating in the space for lids.• H 139 mm.
816
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY069
DOMESTICI - Storage element with holder for pot lids L 1200 mm.
• For heavy-duty drawer L 1200 mm.• Pre-punched bottom.• Equipped with set of buffers (anti-slip / noise-reducing).• Noise-reducing felt coating in the space for lids.• H 139 mm.
1116
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACY070
244 01/2016
L = WidthP = DepthH = HeightPr = Price code
DOMESTICI - Set of chopping boards. - R
• To be laid inside.• Set composed of 1 base, 1 chopping board for bread 400 x 300 mm, 1 chop-
ping board 400 x 300 mm, 2 chopping boards 150 x 300 mm.• Totally made of black PaperStone®.• H 305 mm.
120
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC018
A c c e s s o r i e s DRAWER ACCESSORIES - DOMESTICI series Additional elements, for LEGRABOX heavy-duty drawers. Accessories in black-dyed ash wood. For units P 625 mm.
DOMESTICI - Wine decanter holder. - S
• It can be placed inside accessories with pre-punched bottom .• H 120 mm.
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC019
DOMESTICI - Glasses holder. - T
• It can be placed inside accessories with pre-punched bottom .• H 120 mm.
472
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC020
DOMESTICI - Bottles holder with handles. - U
• To be laid inside.• Thanks to the handles it can be used as freestanding (outside the drawer itself).• H 160 mm.
232
471
160
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC006
DOMESTICI - Plate rack with handles. - V
• To be laid inside.• Thanks to the handles it can be used as freestanding (outside the drawer itself).• H 96 mm.
250
372
96
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADC007
24501/2016
L = WidthP = DepthH = HeightPr = Price code
A c c e s s o r i e s DRAWER ACCESSORIES - PREMIÈRE series Complete kits, for LEGRABOX drawers. Accessories in ash wood / white-dyed MDF. For units P 625 mm.
PREMIÈRE - Cutlery tray L 450 mm.
• For drawer L 450 mm.
472
366
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ049
• The PREMIÈRE accessories are laid inside the drawer.• All accessories are compatible also with internal drawers.
PREMIÈRE - Cutlery tray with knives holder L 600 mm.
• For drawer L 600 mm.• Compatible with C-D-E accessories.
472
516
45
CDE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ050
PREMIÈRE - Cutlery tray with accessories L 900 mm.
• For drawer L 900 mm.• Knives holder, spices holder and pair of chopping boards in beechwood.
472
816
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ051
PREMIÈRE - Cutlery tray with accessories L 1200 mm.
• For drawer L 1200 mm.• Knives holder, spices holder, stainless steel film dispenser and pair of chopping
boards in beechwood.• Compatible with C-D-E accessories.
472
1116
45
CDE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ052
246 01/2016
L = WidthP = DepthH = HeightPr = Price code
A c c e s s o r i e s DRAWER ACCESSORIES - PREMIÈRE series Modular elements, for LEGRABOX drawers. Accessories in ash wood / white-dyed MDF. For units P 625 mm.
PREMIÈRE - Base for cutlery tray L 600 mm.
• For drawer L 600 mm.• Compatible with C-D-E accessories.
472
516
45
2xC D E
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK022
PREMIÈRE - Base for cutlery tray L 900 mm.
• For drawer L 900 mm.• Compatible with A-B-C-D-E accessories.
472
816
45
A B 2xC D E
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK023
PREMIÈRE - Base for cutlery tray L 1200 mm.
• For drawer L 1200 mm.• Compatible with A-B-C-D-E accessories.
472
1116
45
A B C D E C D E2xC D E
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK024
PREMIÈRE - Divider. - A
• Compatible with base for cutlery tray L 450 / 600 / 900 / 1200.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK005
PREMIÈRE - Chopping board pair in beechwood. - B
• Compatible with base for cutlery tray L 450 / 600 / 900 / 1200.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK006
PREMIÈRE - Knives holder. - C
• Compatible with base for cutlery tray L 600 / 900 / 1200.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK007
24701/2016
L = WidthP = DepthH = HeightPr = Price code
A c c e s s o r i e s DRAWER ACCESSORIES - PREMIÈRE series Modular elements, for LEGRABOX drawers. Accessories in ash wood / white-dyed MDF. For units P 625 mm.
PREMIÈRE - Stainless steel spice holder. - D
• 5 glass jars.• Compatible with base for cutlery tray L 600 / 900 / 1200.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK008
PREMIÈRE - Stainless steel film dispenser. - E
• Compatible with base for cutlery tray L 600 / 900 / 1200.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADK009
248 01/2016
L = WidthP = DepthH = HeightPr = Price code
PREMIÈRE - Plate rack L 600 mm.
472
516
204
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ031
A c c e s s o r i e s DRAWER ACCESSORIES - PREMIÈRE series Complete kits, for LEGRABOX heavy-duty drawers. Accessories in ash wood / white-dyed MDF. For units P 625 mm.
• The PREMIÈRE accessories are laid inside the heavy-duty drawer.
• For heavy-duty drawer L 600 mm.• 8 removable plate fastenings.
PREMIÈRE - Plate rack with drainboard L 600 mm.
• For heavy-duty drawer L 600 mm.• Removable stainless steel dish draining tray.
472
516
142
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ032
PREMIÈRE - Plate rack L 900 mm.
• For heavy-duty drawer L 900 mm.• 12 removable plate fastenings.
472
816
204
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ033
PREMIÈRE - Plate rack with drainboard L 900 mm.
• For heavy-duty drawer L 900 mm.• Removable stainless steel dish draining tray.• 8 removable plate fastenings.
472
816
142204
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ053
24901/2016
L = WidthP = DepthH = HeightPr = Price code
PREMIÈRE - Plate rack L 1200 mm.
• For heavy-duty drawer L 1200 mm.• 14 removable plate fastenings.
472
1116
204
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ035
A c c e s s o r i e s DRAWER ACCESSORIES - PREMIÈRE series Complete kits, for LEGRABOX heavy-duty drawers. Accessories in ash wood / white-dyed MDF. For units P 625 mm.
PREMIÈRE - Plate rack with drainboard L 1200 mm.
• For heavy-duty drawer L 1200 mm.• Removable stainless steel dish draining tray.• 12 removable plate fastenings.
472
1116
142204
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ054
PREMIÈRE - Storage element L 600 mm.
• For heavy-duty drawer L 600 mm.• Storage tray + 2 removable small containers.
472
516
229
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ055
PREMIÈRE - Storage element L 900 mm.
• For heavy-duty drawer L 900 mm.• Storage tray + 2 removable small containers.• 8 removable plate fastenings.• 2 elastic strips for storage spaces customisation.
472
816
172 229
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ056
PREMIÈRE - Storage element L 1200 mm.
• For heavy-duty drawer L 1200 mm.• Storage tray + 2 removable small containers.• 12 removable plate fastenings.• 3 elastic strips for storage spaces customisation.
472
1116
172 229
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AADJ057
250 01/2016
L = WidthP = DepthH = HeightPr = Price code
EASY - Cutlery tray L 300 mm.
472
216
45
A c c e s s o r i e s DRAWER ACCESSORIES - EASY series Complete kits, for LEGRABOX drawers. Accessories in grey graphite-dyed oak. For units P 625 mm.
• The EASY accessories are laid inside the drawer.• All accessories are compatible also with internal drawers.
• For drawer L 300 mm.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV081
EASY - Cutlery tray L 450 mm.
• For drawer L 450 mm.
472
366
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV082
EASY - Cutlery tray L 600 mm.
• For drawer L 600 mm.• Compatible with accessory A.
472
516
45
123
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV083
EASY - Cutlery tray with knives holder L 600 mm.
• For drawer L 600 mm.• Compatible with accessory A.
472
516
45
123
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV084
25101/2016
L = WidthP = DepthH = HeightPr = Price code
EASY - Cutlery tray L 900 mm.
• For drawer L 900 mm.• Compatible with accessory A.
472
816
45
123
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV085
A c c e s s o r i e s DRAWER ACCESSORIES - EASY series Complete kits, for LEGRABOX drawers. Accessories in grey graphite-dyed oak. For units P 625 mm.
EASY - Cutlery tray with knives holder L 900 mm.
• For drawer L 900 mm.• Removable chopping board in polyethylene.
472
816
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV086
EASY - Cutlery tray with knives holder L 1200 mm.
• For drawer L 1200 mm.• Removable chopping board in polyethylene.• Compatible with accessory A.
472
1116
45
123 123
A A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV087
EASY - Sliding chopping board.
• For drawer L 600 mm.• Removable and sliding chopping board in polyethylene.• To be used upon cutlery tray, on drawer sides.• H 40 mm.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV023
EASY - Sliding chopping board for bread.
• For drawer L 600 mm.• Removable and sliding chopping board in polyethylene.• To be used upon cutlery tray, on drawer sides.• H 40 mm.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV025
EASY - Spice holder. - A
• To be placed inside the cutlery trays cod. AACV083 / AACV084 / AACV085 / AACV087 / AACW003 / AACW004 / AACW005.
• 4 glass jars with cover in chromium-plated metal.
121
452
16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV008
252 01/2016
L = WidthP = DepthH = HeightPr = Price code
EASY - Bottles holder L 450 mm.
472
366
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV088
A c c e s s o r i e s DRAWER ACCESSORIES - EASY series Complete kits, for LEGRABOX heavy-duty drawers. Accessories in grey graphite-dyed oak. For units P 625 mm.
• The EASY accessories are laid inside the heavy-duty drawers.
• ONLY for lower heavy-duty drawer L 450 mm.
EASY - Bottles holder L 600 mm.
• ONLY for lower heavy-duty drawer L 600 mm.
472
516
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV089
EASY - Plate rack L 600 mm.
• ONLY for lower heavy-duty drawer L 600 mm.• 5 removable plate fastenings.
472
516
205
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV090
EASY - Plate rack L 900 mm.
• ONLY for lower heavy-duty drawer L 900 mm.• 9 removable plate fastenings.
472
816
205
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV091
25301/2016
L = WidthP = DepthH = HeightPr = Price code
EASY - Plate rack L 1200 mm.
• ONLY for lower heavy-duty drawer L 1200 mm.• 15 removable plate fastenings.
472
1116
205
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV092
A c c e s s o r i e s DRAWER ACCESSORIES - EASY series Complete kits, for LEGRABOX heavy-duty drawers. Accessories in grey graphite-dyed oak. For units P 625 mm.
254 01/2016
L = WidthP = DepthH = HeightPr = Price code
EASY - Cutlery tray L 300 mm.
480
200
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACW001
A c c e s s o r i e s DRAWER ACCESSORIES - EASY series Complete kits, for ALUMINIUM drawers DESIGN BOFFI. Accessories in grey graphite-dyed oak. For units P 625 mm.
• The EASY accessories are laid inside the drawer.
• For drawer L 300 mm.
EASY - Cutlery tray L 450 mm.
• For drawer L 450 mm.
480
45
350
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACW002
EASY - Cutlery tray L 600 mm.
• For drawer L 600 mm.• Compatible with accessory A.
480
500
45
123
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACW003
EASY - Cutlery tray with knives holder L 600 mm.
• For drawer L 600 mm.• Compatible with accessory A.
480
500
45
123
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACW004
25501/2016
L = WidthP = DepthH = HeightPr = Price code
EASY - Cutlery tray L 900 mm.
• For drawer L 900 mm.• Compatible with accessory A.
480
785
45
123
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACW005
A c c e s s o r i e s DRAWER ACCESSORIES - EASY series Complete kits, for ALUMINIUM drawers DESIGN BOFFI. Accessories in grey graphite-dyed oak. For units P 625 mm.
EASY - Cutlery tray with knives holder L 900 mm.
• For drawer L 900 mm.• Removable chopping board in polyethylene.
480
785
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACW006
EASY - Spice holder. - A
• To be placed inside the cutlery trays cod. AACV083 / AACV084 / AACV085 / AACV087 / AACW003 / AACW004 / AACW005.
• 4 glass jars with cover in chromium-plated metal.
121
452
16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACV008
256 01/2016
L = WidthP = DepthH = HeightPr = Price code
EASY - Plate rack L 600 mm.
480
500
205
45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACW013
A c c e s s o r i e s DRAWER ACCESSORIES - EASY series Complete kits, for ALUMINIUM heavy-duty drawers DESIGN BOFFI. Accessories in grey graphite-dyed oak. For units P 625 mm.
• The EASY accessories are laid inside the heavy-duty drawers.
• ONLY for lower heavy-duty drawer L 600 mm.• 5 removable plate fastenings.
25701/2016
L = WidthP = DepthH = HeightPr = Price code
A c c e s s o r i e s DRAWER ACCESSORIES - STORAGE SYSTEM series Technical details
450 900
L=816L=516
600
L=366
300
47
3
47
3
47
3
47
3
1200
L=1116
47
3
L=216
Technical chart for inside useful sizes. - LEGRABOX internal drawers, drawers and heavy-duty drawers.
• Aluminium corner compensators (between drawer sides and accessory).• To be glued, during the installation, with bi-adhesive on side of terminal STORAGE SYSTEM element.
20
L15/20 15/20
15
15
20
K K
Detail of corner compensators. - LEGRABOX internal drawers, drawers.
450 900
L=785L=502
600
L=352
300
48
1
48
1
48
1
48
1
L=202
1200
L=1085
48
1
Technical chart for inside useful sizes. - ALLUMINIUM DESIGN BOFFI drawers and heavy-duty drawers.
• Useful drawer depth: P 481 mm.• Accessories depth: P 471 mm.
258 01/2016
L = WidthP = DepthH = HeightPr = Price code
A c c e s s o r i e s DRAWER ACCESSORIES - STORAGE SYSTEM series Technical details
ABN
BN
BN
BN
BN
BN
C AHFE
ILM
450
366
450
600 900
816
900600
BN
A
300
473
473
473
473
473
473
473
216
K K
20 20366
20 20516
20 20816
20 20
300
473
21615
DG
BN
BN
BN I
LM
BN
51615
BN
EFH
EFH
BN
15
K K K K K K
K K K
Use example of the STORAGE SYSTEM accessories inside the LEGRABOX drawers.
P
O
O
O
O
900
816516
600
473
473
1200
1116
473
Q
Q
O
O
Q
Q
Use example of the STORAGE SYSTEM accessories inside the LEGRABOX heavy-duty drawers.
352
352
471
202
202
502
502
785
785
A
H
B
D
L IE
AF
MG
D D
BC C
C
481
471 481 471 481 471 481 471 481
471 481 471 481 471 481
Use example of the STORAGE SYSTEM accessories inside the ALUMINIUM DESIGN BOFFI drawers.
25901/2016
L = WidthP = DepthH = HeightPr = Price code
STORAGE SYSTEM - Ladles holder. - A
471
74
63A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA011
A c c e s s o r i e s DRAWER ACCESSORIES - STORAGE SYSTEM series Modular elements, for LEGRABOX drawers and for ALUMINIUM drawers DESIGN BOFFI. Accessories in melamine-coated grey-graphite oak with aluminium dividers. For units P 625 mm.
• The STORAGE SYSTEM accessories are laid inside the drawer.• All accessories are compatible also with internal drawers.• Each drawer can accommodate accessory compositions up to fill the inside useful width.
Technical chart for inside useful sizes - LEGRABOX drawers and internal drawers.
450 900 1200
816516
600
366
300
47
3
47
3
47
3
47
3
47
3
1116216
= = = = =
STORAGE SYSTEM - Ladles holder. - B
471
100
63B
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA012
STORAGE SYSTEM - Ladles holder. - C
471
124
63C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA013
STORAGE SYSTEM - Cutlery tray. - D
471
200
63D
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA014
260 01/2016
L = WidthP = DepthH = HeightPr = Price code
STORAGE SYSTEM - Cutlery tray. - E
471
300
63
E
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA015
A c c e s s o r i e s DRAWER ACCESSORIES - STORAGE SYSTEM series Modular elements, for LEGRABOX drawers and for ALUMINIUM drawers DESIGN BOFFI. Accessories in melamine-coated grey-graphite oak with aluminium dividers. For units P 625 mm.
STORAGE SYSTEM - Film dispenser. - F
471
300
63
F
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA016
STORAGE SYSTEM - Spice holder. - G
471
200
63G
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA017
STORAGE SYSTEM - Medicine holder. - H
471300
63
H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA018
STORAGE SYSTEM - Ladles holder. - I
471
400
63
I
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA019
STORAGE SYSTEM - Knives holder. - L
• Knives holder in polyethylene.
471
400
63
L
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA020
26101/2016
L = WidthP = DepthH = HeightPr = Price code
STORAGE SYSTEM - Knives holder + chopping board. - M
• Knives holder and chopping board in polyethylene.
471
400
63
M
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA021
A c c e s s o r i e s DRAWER ACCESSORIES - STORAGE SYSTEM series Modular elements, for LEGRABOX drawers and for ALUMINIUM drawers DESIGN BOFFI. Accessories in melamine-coated grey-graphite oak with aluminium dividers. For units P 625 mm.
STORAGE SYSTEM - Storage tray. - N
471
100
63N
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA022
STORAGE SYSTEM - Corner compensator kit. - K
• To compensate lateral spaces.
471
20
15
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAAB044
262 01/2016
L = WidthP = DepthH = HeightPr = Price code
STORAGE SYSTEM - Storage container for food. - O
475
235
250
O
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA053
A c c e s s o r i e s DRAWER ACCESSORIES - STORAGE SYSTEM series Modular elements, for LEGRABOX heavy-duty drawers and for ALUMINIUM heavy-duty drawers DESIGN BOFFI. Accessories in solid grey-graphite oak. For units P 625 mm.
• The STORAGE SYSTEM accessories are laid inside the heavy-duty drawer.• Each drawer can accommodate accessory compositions up to fill the inside useful width.
PL
STORAGE SYSTEM - Storage container for food. - P
• Flexible cross divider.
300
471
250
P
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA054
STORAGE SYSTEM - Storage container for food. - Q
300
235
250
Q
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AACA055
Technical chart for inside useful sizes - LEGRABOX heavy-duty drawers.
450 900
816516
600
366
300
47
3
47
3
47
3
47
3
47
3
1200
1116216
26301/2016
L = WidthP = DepthH = HeightPr = Price code
AMBIALINE - Kit of cutlery trays L 600 mm.
+ +1x 1x 1x
=
300 100 118
600
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAEZ001
A c c e s s o r i e s DRAWER ACCESSORIES - AMBIALINE series Complete kits, for LEGRABOX drawers. Accessories in stainless stee, matt balck painted. For units P 625 mm.
• The AMBIALINE accessories are laid inside the drawer and can be freely organised according to the available space.
• Inside of cutlery trays is covered with black material, soft-touch effect.• All accessories are compatible also with internal drawers.
• It consists of: 1 cutlery tray 300 x 472 mm / 1 frame 100 x 472 mm / 1 frame 118 x 472 mm.
• The single elements can be freely placed inside the drawer.
AMBIALINE - Kit of cutlery trays L 900 mm.
• It consists of: 2 cutlery trays 300 x 472 mm / 1 frame 100 x 472 mm / 1 frame 118 x 472 mm.
• The single elements can be freely placed inside the drawer.
+ +2x 1x 1x
300 100 118
=
900
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAEZ002
AMBIALINE - Kit of cutlery trays L 1200 mm.
• It consists of: 2 cutlery trays 300 x 472 mm / 2 frames 100 x 472 mm / 1 x frame 200 x 472 mm / 1 frame 118 x 472 mm.
• The single elements can be freely placed inside the drawer.
+ + +2x 2x 1x 1x
=
1200
300 100 118 200
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAEZ003
Technical chart for inside useful sizes - LEGRABOX drawers and internal drawers.
450 900 1200
816516
600
366
300
47
3
47
3
47
3
47
3
47
3
1116216
= = = = =
264 01/2016
L = WidthP = DepthH = HeightPr = Price code
AMBIALINE - Cutlery tray 300 x 472 mm.
• It can be positioned close to other Ambialine accessories.• 6 compartments.• The internal compartments are covered with a technical material, with soft-touch
effect.
472300
50
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAEZ004
A c c e s s o r i e s DRAWER ACCESSORIES - AMBIALINE series Modular elements of cutlery trays and dividing frames, for LEGRABOX drawers. Accessories in stainless stee, matt balck painted. For units P 625 mm.
AMBIALINE - Short frame,100 x 472 mm.
• It can be positioned close to other Ambialine accessories.• 2 compartments without bottom, with removable middle divider.
472
10050
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAEZ005
AMBIALINE - Short frame,118 x 472 mm.
• It can be positioned close to other Ambialine accessories.• 2 compartments without bottom, with removable middle divider.
472
11850
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAEZ006
AMBIALINE - Short frame,200 x 472 mm.
• It can be positioned close to other Ambialine accessories.• 2 compartments without bottom, with removable middle divider.
472200
50
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAEZ007
AMBIALINE - Short frame,242 x 242 mm.
• It can be positioned close to other Ambialine accessories.• 2 compartments without bottom, with removable middle divider.• With magnet for fixing to stainless steel back panel.
PL
242 242
50
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAEZ008
AMBIALINE - Adapter for low back type M.
• Support for magnetic fixing of the accessories, to be ordered only in case of melamine-coated non-standard back panel.
PL
242
91
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAEZ009
26501/2016
L = WidthP = DepthH = HeightPr = Price code
AMBIALINE - High frame, 218 x 372 mm.
PL
372218
110
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAEQ001
A c c e s s o r i e s DRAWER ACCESSORIES - AMBIALINE series Modular elements of dividing frames, for LEGRABOX heavy-duty drawers. Accessories in painted metal, matt black. For units P 625 / 750 mm.
• The AMBIALINE accessories are laid inside the drawer and can be freely organised according to the available space.
• 3 compartments without bottom, with removable middle divider.• Compatible with heavy-duty drawers or pull-out doors.• With magnet for fixing to stainless steel back panel.
AMBIALINE - High frame, 242 x 242 mm.
• 2 compartments without bottom, with removable middle divider.• Compatible with heavy-duty drawers or pull-out doors.• With magnet for fixing to stainless steel back panel.
PL
242 242
110
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAEQ002
AMBIALINE - Adapter for middle back type C.
• Support for magnetic fixing of the accessories, to be ordered only in case of melamine-coated non-standard back panel.
PL
242
177
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAEQ003
AMBIALINE - Adapter for high back type F.
• Support for magnetic fixing of the accessories, to be ordered only in case of melamine-coated non-standard back panel.
PL
242
241
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAEQ004
Technical chart for inside useful sizes - LEGRABOX heavy-duty drawers.
450 900
816516
600
366
300
47
3
47
3
47
3
47
3
47
3
1200
1116216
266 01/2016
L = WidthP = DepthH = HeightPr = Price code
Dustbin kit for base units L 600 mm.
• Total capacity: 28 l.• a = 1 rear small container with dividers.• b = 1 bin H 300 mm - Capacity 18 l.• c = 1 bin H 300 mm, lid with washable filters - Capacity 10 l.
a
b c
560
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABAA010
A c c e s s o r i e s ACCESSORIES FOR WASTE COLLECTION - Dustbins for under-sink base units For hinged door. Pull-out differentiated waste collection system for under-sink base units with HINGED DOORS. Including aluminium bottom.
Dustbin kit for base units L 900 mm.
• Total capacity: 41 l.• a = 2 rear small containers with dividers.• b = 1 bin H 300 mm - Capacity 21 l.• c = 2 bins H 300 mm, 1 has lid with washable filters - Capacity 10 l.
a a
bc c
860
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABAA011
Dustbin kit for base units L 1200 mm.
• Total capacity: 68 l.• a = 2 rear small containers.• b = 2 bins H 260 mm - Capacity 26 l.• c = 2 bins H 260 mm with lids, 1 has washable filter - Capacity 8 l.
bb cc
a a
1160
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABAA012
26701/2016
L = WidthP = DepthH = HeightPr = Price code
Pull-out differentiated waste collection dustbin.
• Black polypropylene.• Total capacity: 42 l.• 2 bins 21 l. - Sliding lid with opening front part for “fast usage”.• Automatic pull-out system fixed to hinged door.• Compatible with base unit L min 450 mm. Fixed on cabinet bottom.• H 433 mm.
433
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABAA038
A c c e s s o r i e s ACCESSORIES FOR WASTE COLLECTION - Dustbins for under-sink base units For hinged door. Dustbins / detergent holder, for under-sink base units with HINGED DOOR.
Pull-out differentiated waste collection dustbin.
• Polypropylene and black metal.• Total capacity: 70 l.• 2 bins 35 l. - handle and swing lid.• Totally extractable glides.• Compatible with base unit L min 450 mm. Fixed on cabinet bottom.• H 593 mm.
593
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABAA037
Pull-out dustbin.
• Stainless steel.• Total capacity: 18 l.• 1 bin.• Compatible with base unit L min 600 mm.• L 600 = dustbin not to be used with food waste disposer.• H 380 mm.
380
270430
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABAA002
Free standing dustbin.
• Stainless steel.• Total capacity: 30 l.• Pedal for lid opening.• H 590 mm.
Ø340
860
59065
AVAILABLE UNTIL STOCK LASTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABAA007
Pull-out detergent holder.
• Stainless steel.• To be matched with dustbin cod. ABAA002, compatible ONLY with base unit L
min 900 mm.• H 380 mm.
380
270430
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABCA012
268 01/2016
L = WidthP = DepthH = HeightPr = Price code
Dustbin kit for base units L 600 mm. - Type D
• Total capacity: 42 l.• a = bin 21 l.
a a
300
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDL021
A c c e s s o r i e s ACCESSORIES FOR WASTE COLLECTION - TECNOKIT T2 series - Dustbins for under-sink base units For pull-out door. Differentiated waste collection system for under-sink base units with PULL-OUT DOOR. Colour: grey.
Dustbin kit for base units L 600 mm. - Type E
• Total capacity: 29 l.• b = bin 12 l. + lid + 2 washable filters.• c = bin 17 l. + lid.• d = small container-tray 222 x 122 mm.
cb
dd
260
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDL022
Dustbin kit for base units L 900 mm. - Type A + A
• Total capacity: 64 l.• e = bin 16 l.
300
e e e e
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDL023
Dustbin kit for base units L 900 mm. - Type B + B
• Total capacity: 24 l.• b = bin 12 l. + lid + 2 washable filters.• f = small container-tray 330 x 150 mm.
eb
f
eb
f
260
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDL024
Dustbin kit for base units L 900 mm. - Type C + C
• Total capacity: 44 l.• c = bin 17 l. + lid.• d = small container-tray 222 x 122 mm.
d
c
d
c
260
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDL025
Dustbin kit for base units L 900 mm. - Type A + B
• Total capacity: 44 l.• e = bin 16 l.• b = bin 12 l. + lid + 2 washable filters.• f = small container-tray 330 x 150 mm.
eb
f
e e
260 300
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDL026
26901/2016
L = WidthP = DepthH = HeightPr = Price code
Dustbin kit for base units L 900 mm. - Type A + C
• Total capacity: 49 l.• e = bin 16 l.• c = bin 17 l. + lid.• d = small container-tray 222 x 122 mm.
e e
300
d
c
260
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDL027
A c c e s s o r i e s ACCESSORIES FOR WASTE COLLECTION - TECNOKIT T2 series - Dustbins for under-sink base units For pull-out door. Differentiated waste collection system for under-sink base units with PULL-OUT DOOR. Colour: grey.
Dustbin kit for base units L 900 mm. - Type B + C
• Total capacity: 29 l.• b = bin 12 l. + lid + 2 washable filters.• f = small container-tray 330 x 150 mm.• c = bin 17 l. + lid.• d = small container-tray 222 x 122 mm.
d
c
260
eb
f
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDL028
Dustbin kit for base units L 1200 mm. - Type D + D
• Total capacity: 84 l.• a = bin 21 l.
a a a a
300
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDL032
Dustbin kit for base units L 1200 mm. - Type D + E
• Total capacity: 71 l.• a = bin 21 l.• b = bin 12 l. + lid + 2 washable filters.• c = bin 17 l. + lid.• d = small container-tray 222 x 122 mm.
a a
300
cb
dd
260
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDL033
Dustbin kit for base units L 1200 mm. - Type E + E
• Total capacity: 58 l.• b = bin 12 l. + lid + 2 washable filters.• c = bin 17 l. + lid.• d = small container-tray 222 x 122 mm.
cb
dd
cb
dd
260
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDL034
270 01/2016
L = WidthP = DepthH = HeightPr = Price code
Dustbin kit for base units L 900 mm. - Type G
• Total capacity: 46 l.• b = bin 12 l. + lid + 2 washable filters.• c = bin 17 l. + lid.• d = small container-tray 222 x 122 mm.
cb c
d dd
260
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDL035
A c c e s s o r i e s ACCESSORIES FOR WASTE COLLECTION - TECNOKIT T2 series - Dustbins for under-sink base units For lower heavy-duty drawer. Differentiated waste collection system for under-sink base units with LOWER HEAVY-DUTY DRAWER for dustbin. Colour: grey.
Dustbin kit for base units L 1200 mm. - Type I
• Total capacity: 63 l.• b = bin 12 l. + lid + 2 washable filters.• c = bin 17 l. + lid.• d = small container-tray 222 x 122 mm.
cb c c
d d dd
260
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDL036
27101/2016
L = WidthP = DepthH = HeightPr = Price code
Dustbin kit for base units L 600 mm. - Type A
• Total capacity: 32 l.• a = bin 16 l. + lid.• b = small container-tray integrated on base.
295
a ab b
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDN011
A c c e s s o r i e s ACCESSORIES FOR WASTE COLLECTION - PREMIÈRE series -Dustbins for under-sink base units For pull-out door. Differentiated waste collection system for under-sink base units with PULL-OUT DOOR. Colour: white.
Dustbin kit for base units L 600 mm. - Type B
• Total capacity: 16 l.• a = bin 16 l. + lid.• b = small container-tray integrated on base.• c = container for detergents.
295
a cb b
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDN012
Dustbin kit for base units L 900 mm. - Type C + C
• Total capacity: 32 l.• a = bin 16 l. + lid.• b = small container-tray integrated on base.• d = paper /magazine holder.
295
ad
bbad
bb
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDN013
Dustbin kit for base units L 900 mm. - Type C + D
• Total capacity: 16 l.• a = bin 16 l. + lid.• b = small container-tray integrated on base.• c = container for detergents.• d = paper /magazine holder.
295
ad cbb bb
b
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDN014
Dustbin kit for base units L 1200 mm. - Type A + A
• Total capacity: 64 l.• a = bin 16 l. + lid.• b = small container-tray integrated on base.
a ab b
295
a ab b
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDN015
Dustbin kit for base units L 1200 mm. - Type A + B
• Total capacity: 48 l.• a = bin 16 l. + lid.• b = small container-tray integrated on base.• c = container for detergents.
a ab b
295
a cb b
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDN016
272 01/2016
L = WidthP = DepthH = HeightPr = Price code
Dustbin kit for base units L 900 mm. - Type E
• Total capacity: 32 l.• a = bin 16 l. + lid.• b = small container-tray integrated on base.• c = container for detergents.• d = paper /magazine holder.
295
a cb
abb b
d
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDN017
A c c e s s o r i e s ACCESSORIES FOR WASTE COLLECTION - PREMIÈRE series -Dustbins for under-sink base units For lower heavy-duty drawer. Differentiated waste collection system for under-sink base units with LOWER HEAVY-DUTY DRAWER for dustbin. Colour: white.
Dustbin kit for base units L 1200 mm. - Type F
• Total capacity: 48 l.• a = bin 16 l. + lid.• b = small container-tray integrated on base.• c = container for detergents.• d = paper /magazine holder.
295
a cb
ab
abb b
d
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABDN018
27301/2016
L = WidthP = DepthH = HeightPr = Price code
A c c e s s o r i e s ACCESSORIES FOR WASTE COLLECTION - Products for the differentiated waste collection Food waste disposers.
Food waste disposer. • Compatible with 3“ 1/2 sink strainer waste.• Capacity of waste disposer chamber: 980 ml.• Quit Plus soundproofing.• Automatic reversibility.• Dissipation disc and ring in stainless steel.• Pneumatic switch included.• Continuous inflow.• Weight: 8,205 kg.• In compliance with EC standards, BEAB approved.• Voltage: 230 V - 50 Hz.• Power: 0,65 Hp.
L P H
Food waste disposer mod. 65 - Insinkerator - 1971065. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ALAK001Kit of overflow-dishwasher connection - 1975511. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVOH001Plug for cutlery protection - 1975075. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVDR001
274 01/2016
L = WidthP = DepthH = HeightPr = Price code
A c c e s s o r i e s VARIOUS ACCESSORIES FOR WORKTOPS.
Electrified telescopic unit for sockets. • Cover and ring in stainless steel.• Pay attention to position it far away from water (min. 900 mm).
L P H
A - Germany - Austria - Holland (VDE) - 3 sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GVCE01B - France - Belgium - Poland - 3 sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GVCE02C - Switzerland (10A) - 3 sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GVCE03D - Denmark - 3 sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GVCE04E - UK - 3 sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GVCE05F - Italy (10A/16A) - 3 sockets (1A + 2F).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GVCE09G - USA - 2 sockets.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GVCE07H - Australia - 2 sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GVCE08I - China - 3 sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GVCE11
Ø 127
Ø 100
211
287
A B C D E
F G H I
ANGLE chopping board. • Food white polyethylene.• 45° sides used as handles.
L P H
White polyethylene. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420 300 30 GLAV05White polyethylene. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 250 30 GLAV06
300
250
30
420380
Open-faced countertop-mounted unit. • Tempered glass, th. 6 mm.• 45° UV-glued corners.• Back panel and lower shelves in mirrored finish, in white or black painted glass.
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 340 600 PBHMA60N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 340 600 PBHMA90N
L340
600
27501/2016
L = WidthP = DepthH = HeightPr = Price code
A c c e s s o r i e s VARIOUS ACCESSORIES FOR WORKTOPS.
Stainless steel corner fixing device. • For wall-mounted worktops/peninsula compositions.• Thickness: 2 mm.• L max 1100 mm.• Price per linear metre.• Fixing hardware included.• Cut-out for corner fixing device, used on worktops in laminate, Lamicolor®, wood
and Corian®.
50
30
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 50 30 ATEE001
Transparent glass back-splash. • For tops, th. Min. 40 mm, P. min. 830 mm.• For worktops in laminate, Lamicolor®, wood and Corian® please add the panel
milling customisation cod. ZNAV01 (chapter Customised Solutions / Price increas-es / Maintenance).
• Aluminium profiles included.• L max 2400 mm.• Price per linear metre.
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 8 250 SOAKBB01
Seal in PVC. • Placed between worktop and back-splash / back panel and between worktop and wall.
• Coextruded transparent opaline PVC.• Price per linear metre.• A = Use between worktop and back-splash.• B = Use between worktop and wall.
A B
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AFDV001
276 01/2016
L = WidthP = DepthH = HeightPr = Price code
A c c e s s o r i e s VARIOUS ACCESSORIES FOR TALL UNITS.
Pull-out shelf. • Melamine, same finish as carcass. Profiles in naturally anodised aluminium.• Equipped with totally extractable glides - capacity: 30 kg.• Customised version: L min 450 / max 1200 mm.
L P H
For tall units L 600 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 - - ACCE001For tall units L 900 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 - - ACCE002
Customised. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ACCE100
Fixed shelf with LED lighting and sockets. • Melamine, same finish as carcass. Profiles in naturally anodised aluminium.• It includes: 1 LED built-in spotlight + 2 electrical sockets + switching device in-
cluding a presence sensor.• Provided with voltage adapter 90-240 V / 50-60 Hz, for compatibility with US mar-
ket.
L P H
For tall units L 600 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 - - ACCE003For tall units L 900 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 - - ACCE004
27701/2016
L = WidthP = DepthH = HeightPr = Price code
A c c e s s o r i e s WALL-MOUNTED VARIOUS ACCESSORIES Rails and accessories in stainless steel, Design Boffi
Rail. • AISI 304 stainless steel, rectangular section 30 x 10 mm.• Fixing devices included.• It can be installed on wall or on finished back panels.• CUSTOMISATIONS ARE NOT AVAILABLE.
L P H
L 900 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 - - GAAF01L 1200 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 - - GAAF02L 1500 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 - - GAAF03L 1800 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 - - GAAF04
Hooks (package of 5 pieces). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GBBO01
33
73
Shelf. • AISI 304 stainless steel.
L P H
L 595 mm (rail min L 1200 mm).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 595 150 250 GBBP01L 490 mm (rail min L 900 mm).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 490 150 250 GBBP06
490/595 150
250
Kitchen paper roll holder. • AISI 304 stainless steel.
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350 150 250 GBBQ01
350 150
250
90
Knives holder. • AISI 304 stainless steel.
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 80 480 GBBR01
250 80
480
340
278 01/2016
L = WidthP = DepthH = HeightPr = Price code
A c c e s s o r i e s LIGHTING
LED internal lamp. • LED bar, to be placed inside cabinets with hinged or pull-out opening (drawers or pull-out doors).
• Controlled by an integrated sensor.• Voltage 24 V dc - Absorption 17 W per linear metre.• Please order separately the power kit and any extension cable kit.• Colour temperature 2700 K.• Black anodised extruded aluminium.• Visible cables to be fixed under shelf.
L P H
PULL-OUT OPENINGSingle door L 450 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMDD01Single door L 600 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMDD02Single door L 900 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMDD03Single door L 1200 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMDD06Double door L 900 mm (450+450). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMDD04Double door L 1200 mm (600+600). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMDD07
HINGED OPENINGSingle door L 450 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMDD08Single door L 600 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMDD09Double door L 750 mm (300+450 or 450+300). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMDD10Double door L 900 mm (450+450). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMDD11Double door L 1050 mm (600+450 or 450+600). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMDD12Double door L 1200 mm (600+600). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMDD13
Power kit 100÷240 V / 50÷60 Hz (for max 5 x 24 V dc). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVPE001Extension cable kit (for max 5 x 24 V dc). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVPF001
IN100÷240 V
OUT+24 V dc
IN100÷240 V
OUT+24 V dc
AVPE001
AVPE001AVPF001
27901/2016
L = WidthP = DepthH = HeightPr = Price code
A c c e s s o r i e s LIGHTING
LED lights. • A = version for wall unit without back panel, with lower or lower/upper light.• B = version for wall unit with back panel, with lower light or lower/upper light.• The LED bar can be placed in the lower or upper part of the wall unit or both.• Calculation of LED bar = L of composition - visible side panels thickness with
increased depth P - 6 mm.• For each LED system please order separately: bar, transformer, cables, connec-
tion elements as necessary and relative cut-out for end wall unit side panel with increased depth.
• 23 x 23 mm aluminium bar with LED. Input: 17 W per linear metre. Colour tem-perature: 2700 K.
• ATTENTION! : please leave a technical area accessible for service, where house the transformers.
• 1) Upper strip with wall unit hanging rail.• 2) Compensation lower strip.• 3) Aluminium bar for LED.• 4) Customised end side panel P 345 mm (total P 370).• 5) Customised end side panel P 365 mm (total P 390).
L P H
A - FOR WALL UNIT WITHOUT BACK PANELL min 150 / max 900 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMCY11L min 901 / max 1800 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMCY12L min 1801 / max 3000 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMCY13
B - FOR WALL UNIT WITH BACK PANELL min 150 / max 900 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMCW11L min 901 / max 1800 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMCW12L min 1801 / max 3000 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMCW13
LED bar - L min 150 / max 900 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMCZ01LED bar - L min 901 / max 1800 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMCZ02LED bar - L min 1801 / max 3000 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMCZ03
Transformer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMBY04Polarized electrical extension cable for LED connections, L 500 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 - - GMBZ03Polarized electrical extension cable for LED connections, L 2000 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 - - GMBZ045 multiple connection element, polarized - Power 70 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMVA01
End side panel for wall unit P 345 mm (without back panel). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 345 - ZPACF01End side panel for wall unit P 365 mm (with back panel). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 365 - ZPACF02
370 (4)
2520
57
23
80
80
80
57
23
80
34525
1
2
3
A
370 (4)
57
23
80
80
34525
1
2
3
A
1
2
3
390 (5)
34545
B
2520
80
57
23
80
1
2
3
390 (5)
34545
B
3
3
280 01/2016
L = WidthP = DepthH = HeightPr = Price code
A c c e s s o r i e s LIGHTING
Built-in LED spotlight. • Low consumption, high light performance.• Body and ventilated frame in aluminium.• Tested for 50000 life hours.• Feeder voltage 100÷240 V, 50÷60 Hz - 350 mA.• Power: 6 W• Consumption 350 mA.• Ø 60 mm built-in hole.• Min. thickness: 20 mm.• Please order separately the specific cut-out cod. ZNAC02 and n.1 transformer
per each spotlight.
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMBX05
Transformer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMBY03Polarized electrical extension cable for LED connections, L 500 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 - - GMBZ03Polarized electrical extension cable for LED connections, L 2000 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 - - GMBZ04
IP21
F
Ø 75
15 21
Built-in halogen spotlight. • Aluminium frame.• Feeder voltage 220 V, 50 Hz.• Power: 10 W.• Please order separately the specific cut-out cod. ZNAC02 and n.1 transformer
per max each 6 spotlights.
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMBX04
Transformer (max 6 spotlights) with cable L 2000 mm - EUROPE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMBY01Transformer (max 6 spotlights) with cable L 2000 mm - USA.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - GMBY02Extension connector cord for spotlights, L 500 mm (2 pieces). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 - - GMBZ01Extension connector cord for spotlights, L 2000 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 - - GMBZ02
Ø 65
28101/2016
L = WidthP = DepthH = HeightPr = Price code
CE compliant - The product complies with EN 60598 standard and BT 73/23/CEE directive with its updates.
Electrical feeding of 24 V. Insulation class III.
Equipment class. Vaporized water protection level.
Equipment class II. Double insulation level. Without grounding.
NEMKO- safety certified.
Equipment suitable for direct installation on inflammable surfaces.
IP21
F
A c c e s s o r i e s LIGHTING Marks specifications
Boffi SpaVia Oberdan 70 20823 Lentate sul Seveso [MB] - ItalyTel. +39.0362.5341 - Fax +39.0362.565077