engineered transparency 2021
TRANSCRIPT
Engineered Transparency 2021 Glass in Architecture and Structural Engineering
-rnst&Sohn A W il ey Brand Messe
Düsseldorf
Table of content
Foreword ............ ... ......... . ... .. .. . .. . ....... .. ....... . . .. .. V
Glass - Projects
Glass facacles: present and future challenges . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Lucio Blandini
Maximum Transparency - Messeturm Frankfurt . . . . . . . . . . . . . . . . . . . . . . . . . 13 Steffen Feirabend, Florian Starz, Alexandra Mrzigod, Peter Eckardt, Stefan Kloker
Uber - Highly transparent facades in seismic prone region . . . . . . . . . . . . . . . . 21 Matthias Oppe, Stefanie Grün
A G lass Facade with prestressed Carbon Cables . . . . . . . . . . . . . . . . . . . . . . . . 31 Mike Sehlaich, Anne K. Burghartz
Bonded Glass Tubes as Translucent Jacket of the Museum of Fine Arts in Houston - Design, Engineering and Testing . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Jonas Hilcken, Felix Schmitt
Curved skylight of the Hotel RITZ Madrid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Arnau Bover, Jordi Torres, Carles-Hug Bitlloch, Jordi Vila
Breathing Lessons: Development of a Custom Motorized Facade . . . . . . . . . . 67 Xaver Nuiding, Thomas Lorenz, Philipp Herreiner, Michael Engelmann
Glass - Structural Glass
Bending behaviour of cold bent linearly supported glass plates . . . . . . . . . . . . 83 Maximilian Laurs, Pietro Di Biase, Benjamin Schaaf, Markus Feldmann
Subcritical Crack Growth Parameters for Glass under Different Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Christopher Brokmann, Stefan Kolling, Jens Schneider
Experimental investigation and Mohr-Coulomb plasticity modeling of glass fragments from pre-stressed gtass panes . . . . . . . . . . . . . . . . . . . . . . . 107 Alexander Pauli, Michael A. Kraus, Geralt Siebert
Experimental investigations on the fracture strength of soda-lime silica glass at etevated temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Gregor Schwind, Fabian von Blücher, Michael Drass, Jens Schneider
Chemically strengthened glass for architectural applications . . . . . . . . . . . . . . 135 Marco Zaccaria, Michel Dubru, Nerio Lucca, Anna Sikyi"lova
Analysis of residual stresses at holes near edges in tempered glass . . . . . . . . 145 Steffen Dix, Lena Efferz, Lukas Sperger, Christian Schuler, Steffen Feirabend
VIII Table of content
Bullding a Frameless Glass Structure with Structural PVB lnterlayers and Stainless Steel Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 Roman Schieber, Thiemo Fildhuth, Matthias Haller, Wim Stevels
Glass - Composites and Coatings
Determination and verification of PVB interlayer modulus properties Wim Stevels, Matthias Haller, Pol D' Haene
183
Cold Bent Laminated Glass Application - Numerical Research . . . . . . . . . . . . . 191 Erjon Muja, Julian Hänig, Malvinder Rooprai, Ingo Stelzer, Bernhard Weller
lnvestigations on the viscoelastic material behaviour and linearity limits of PVB ............. , .............................................. 207 Miriam Schuster, Kerstin Thiele, Jens Schneider
lnsulation glass units made of thin glass-polycarbonate composite panels 225 Thorsten Weimar, Laura Vuylsteke
Development of Novel Connection Joints for Glass-Plastic-Composite Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Erica D'Ettore, Julian Hänig, Bernhard Weller
Glass - Structural Design The dynamlc structural response of a laminated glass balustrade analysed with optical measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251 Natalie Williams Portal, Mathias Flansbjer, Daniel Honfi, Marein Kozlowski
Ad~ ETAG 002 - A Eurocode-compliant design concept for silicone adhesive Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 Michael Drass, Michael A. Kraus
Timber-glass composite: concepts for glued bracing floor elements . . . . . . . . 291 Alireza Fadai, Katharina Holzinger, Werner Hochhauser
Dlstortional-dilatational strain fallure mode concept for hyperelastic materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301 Philipp L. Rosendahl, Michael Drass, Jens Schneider
Liquid laminated glass connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323 Stratis Volakos, Chris Davis, Martien Teich, Peter Lenk, Mauro Overend
Layered Lamlnated Glass Elements with High Load-Bearing Capacities . . . . . 333 Octavian Bunea, Julian Hänig, Timo Saukko, Ingo Stelzer, Bernhard Weller
Numerical study on adheslvely bonded glass-metal facade elements under different loading scenarios ................................... : . 349 Vlad A. Silvestru, Oliver Englhardt, Jens Schneider
Table of content IX
Experimental examination on thermal stresses in triple insulating glass units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361 Paulina Bukieda, Elena Fleckenstein, Katharina Lohr, Bernhard Weller
lnvestigation on the temperature dependent morphology of deposited fibers for laser based glass additive manufacturing . . . . . . . . . . . . . . . . . . . . . . 377 Khodor Sleiman, Talash Malek, Arndt Hohnholz, Marc-Andre Dittrich, Peter Jäschke, Stefan Kaierle, Berend Denkena, Ludger Overmeyer
lwisted Tower - A Feasibility Study for Cold-Bent lnsulating Glass Units with an Elastic Edge Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 Thomas Scherer, Christian Scherer, Wolfgang Wittwer
Facade - Architectural Design
Surface visual stimulation by spatial addition. Case-studies of layered glass facades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403 Marein Brzezicki
Healthy Facades - Step in into your comfort zone . . . . . . . . . . . . . . . . . . . . . . . 417 Michael Drass, Michael A. Kraus, Heiko Mertel, Helmut Köster, Jens Schneider
Benefits of optical distortion measurement - How Moirt~ technology drives the efficiency of glass production chains . . . . . . . . . . . . . . . . . . . . . . . . . 427 Thomas Mitra
Novel, semi-transparent glass-glass-BIPV-modules with new design features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431 Johannes Eisenlohr, Frank Ensslen, Daria Raine, Martin Heinrich, Kimberly Görich, Angele Tersluisen, Felix Jäger, Ortrun Aßländer, Johannes Kimmerle, Joachim Höhne, Thomas Stark, Tilmann E. Kuhn
Reinterpretation of Dalr's »Vidrlera Hipercubica« designed by Perez Pif'iero in 1971 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439 Martina Pena, Katja Wirfler, Sebastian Andres L6pez, Henrik Reißaus, Thorsten Weimar
Integration of SMA-driven smart textile sun shading into real size facade demonstrators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451 Paul-Rouven Denz, Puttakhun Vongsingha, Maxie Schneider, Ebba Fransen Waldhör, Christiane Sauer
Review of commercial software tools for facade acoustics Alvaro Balderrama, Daniel Arztmann, Jens-Uwe Schulz
465
Design Variants of Slat-type Solar Thermal Blinds for facade integration . . . . 473 Puttakhun Vongsingha, Paul-Rouven Denz, Natchai Suwannapruk, Simon Frederik Häringer
N26 - Daylighting design made trom thin glass . . . . . . . . . . . . . . . . . . . . . . . . . . 485 Jürgen Neugebauer
X Table of content
Facade - Structural Design
Lightweight and Transparent Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495 Peter Lenk
Curved and Large Format lnsulating Glass in Architectural Applications 503 Christoph Rubel
Connecting Artificial lntelligence and Structural Glass Engineering -Overview, Potentials and Case Studies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 511 Michael A. Kraus, Michael Drass
Environment and technology: a methodological approach in the use and maintenance of glass tacades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 527 Benedetta Marradi, Michele Di Sivo
Safety of laminated BIPV glasses: progresses towards product qualitication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 541 Pierluigi Bonomo, Fabio Parolini , Francesco Frontini
Prelimlnary Evaluation of the Heating and Cooling Capability of an lnsulating Glass Unlt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 559 Maximilian Möckel, Bernhard Weller, Thomas Schmidt, Markus Buning
Performative Simplicity - autoreactive low-tec tacades . . . . . . . . . . . . . . . . . . . 575 Philipp Molter, Cecile Sonnet, Michael Reifer, Matthias Ficht, Thomas Auer
Energy-etticient and sustainable composite facade constructions . . . . . . . . . . 589 Alireza Fadai, Daniel Stephan
Author Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 599
Keyword Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601