Non Structural Metal Roofing Systems | Structural Metal Roofing Systems

Curved Panel Systems | Wall Panel Systems | Soffit Systems

Renewable Energy Solutions | Gutter Systems

Englert® sets the standard for innovative, efficient and environmental solutions.

Why Choose Englert?• Since its founding in 1966, Englert has evolved into one of the pre-eminent forces in metal

roofing and gutter systems. Englert offers architects and builders the most innovative and advanced solutions that uniquely combine aesthetics and performance. Englert is widely recognized as the leader in job site roll forming, where materials are custom cut and fit on-site, to provide a seamless, high quality product, with far less waste, and at lower costs than pre-formed panels.

• Englert technicians provide parts and service to any portable gutter or roof panel machine anywhere in the world. To meet special requirements, Englert does offer factory formed products through a comprehensive network of authorized independent manufacturers.

• To give the architect nearly limitless creative freedom in colors and finishes, Englert’s own in-house continuous paint line offers the lowest minimum quantities in the industry. With our coating expertise and resources, as well as our on-staff specialists, you can expect your Englert roofing system to provide unsurpassed durability throughout the long life of the product. Our dried-in-place pretreatment system allows Englert to provide the most environmentally friendly coating process – eliminating harmful chromates. We can apply an array of coatings including: Energy Star® compliant Kynars®, silicone polyesters, polyesters, plastisols and acrylics. Even better, we can apply these coatings to aluminum, Galvalume®, galvanized, or cold rolled steel.

• Englert offers one of the widest ranges of metal roofing solutions in the industry, with all the roof profiles, finishes, textures, architectural details and structural options your design would require.

2

Aesthetics

• A wide range of seam profiles, panel widths and finishes to create the roof lines you desire.

• Narrow seams or wide batten-type profiles are available in both structural and non-structural systems.

• Optional ribs and striated patterns are also available to articulate the roof lines from ridge to eaves.

• The systems accommodate complex roof configurations, including hips, valleys, dormers and a broad range of pitches.

• Transitions between roof surfaces and other building elements, such as mansards, fascia, siding and soffits, can be cleanly and seamlessly detailed in a variety of profiles.

• Panel systems come in custom widths from 12" to 21".

• Flush seam panels can achieve flat surfaces on fascia walls and soffits.

Finishes

• Our exceptionally broad range of finishes, both custom and standard, can create anything from a natural weathered appearance to bright high-performance, full-strength fluorocarbon colors.

Structural Requirements

• Our 1000 series architectural roof systems are economical, non-structural profiles for application over decking in new construction or over existing roofs in retrofit applications.

• Englert’s 2000 series roof systems meet UL and ASTM standards for structural roofing when applied directly over purlins or trusses.

Snap-Lock Versus Mechanical Seams

• Snap-lock systems offer easy, fast installation and uniform, clean-standing seam profiles, especially in transitions between roof surfaces to mansards and fascia. The locking panel profile continu-ously interlocks with the adjacent panel without mechanical seaming or addi-tional caps. Panels are typically fastened to the substrate with concealed clips that provide clearance for thermal expansion and contraction. These systems have limited structural ratings and require a minimum slope of 3"/12".

• Mechanically-seamed systems are joined with a machine that folds each panel over the adjacent one to form a continuous, watertight seam. These systems are ideal for very low slopes, with pitches as shallow as 1/2"/12", and provide better air and water infiltration protection.

A1301(1”)

C1301(1”)

Product Selector

SELECTING ENGLERT METAL ROOF SYSTEMS

3

NON STRUCTURALMetal Roofing Systems

ENGLERT’S 1000 SERIES SYSTEMS are designed for steep sloped roofs and other exterior surfaces in light commercial and residential projects. Conventional architectural details can be used to provide a smooth transition from roof surfaces to mansards, fascia, walls and soffits. These systems offer economical solutions for installing metal roofing over plywood or metal decking in new construction and over existing shingle roofs in retrofit construction.

A1000-1 1/2"Snap-lock Panel

ThE ENGLERT A1000 SERIES is a cost effective architectural system with concealed clips and fasteners, requiring no mechanical seaming or separate seam caps. The narrow standing seam can be notched and bent to provide a smooth transition from roof to fascia or mansard. Knee caps are applied over the notched seams to create visual continuity.

4

A1100—1 1/4" Integral Snap-Lock Panel

With only a 1 1/4" standing seam, ENGLERT A1100 SNAP-LOCK PANELS offer the designer an architectural system for creating clean roof lines with a minimum of shadows and textures.

A1101—1" Integral Snap-Lock Panel

ThE ENGLERT A1101 SERIES panel system combines the clean lines of a low profile architectural system with the unique versatility of a clipless hidden fastener design. Ideal for light duty commercial, residential and mansard/canopy applications on a solid deck.

5

A1500-1 1/2" Integral Snap-Lock Panel

ThE ENGLERT A1500 SERIES panel system combines the clean lines of a low profile architectural system with the unique versatility of a hidden fastener design. Ideal for light duty commercial, residential and mansard/canopy applications on a solid deck.

A1301-1" Mechanically Seamed Panel

A1300-1 1/2" Mechanically Seamed Panel

ThE ENGLERT A1301 SERIES also offers the same architectural detailing capability as architectural snap-lock panels. Transitions from roof surfaces to mansards, fascia, walls and soffits with the strength and weather tightness advantage of a mechanically seamed system.

ThE ENGLERT A1300 SERIES offers the same architectural detailing capability as architectural snap-lock panels. Transitions from roof surfaces to mansards, fascia, walls and soffits with the strength and weather tightness advantage of a mechanically seamed system.

6

STRUCTURALMetal Roofing Systems

ENGLERT OFFERS A FULL RANGE OF STRUCTURAL PANEL SYSTEMS with profiles that are designed for architectural-quality details at eaves and other edge conditions. These systems are specifically designed for spanning roof purlins and rafters at

various spacings, many with very low minimum slope requirements.

S2000-1 3/4"Integral Snap-Lock Panel

Englert’s most popular system, this INTEGRAL SNAP-LOCK PANEL SYSTEM combines architectural versatility – for cleanly detailed, continuous seam transitions from roof to mansard, fascia, wall panel or soffit – with the dramatically increased spanning and uplift capabilities of a structural system.

7

S2400-2" Mechanically Seamed Panel

The S2400 is a structural panel with a thin, 2" standing seam. This mechanically seamed system is available in both single lock and double lock details. It is similar in appearance to the S2500 but lacks a down-leg on the male side so it can be curved.

S2500-2" Mechanically Seamed Panel

Designed particularly as a structural roof system for pre-engineered buildings, this “Armco style” panel is the industry’s most extensively tested system, with over 50 years of history in the field. ThE S2500 PROFILE incorporates a unique heavy-duty interlock clip that secures the system while allowing thermal expansion and contraction.

8

S3000-3" T-Seam Mechanically Seamed Panel

ENGLERT’S SERIES 3000 T-SEAM is a nominal 3" deep structural roofing system designed to provide excellent structural spanning capabilities as well as insuring a high, weather tight seam, even in the lowest, longest roof runs found in today’s building designs.

ThE SERIES 3000 Nominal 3" high mechanically seamed panel system is designed specifically for heavy industrial and large commercial buildings with low slope, long panel runs and wide span structural requirements. In addition to its durability and ruggedness, this profile has been designed so that panels damaged by storms, falling objects and man-made causes can be individually removed without uprooting all panels of the damaged roof. The Series 3000 panels can also be installed bidirectionally.

STRUCTURALMetal Roofing Systems

Our structural panels use a hidden fastener system and are MEChANICALLY SEAMED TOGEThER MAKING ThEM WEAThER-TIGhT. All of these systems can be installed over open framing or over a solid deck. Our structural systems are available

in several steel and aluminum gauges and in a wide variety of ULTRA-Cool standard Kynar® colors.

9

CURVED PANELSEnglert offers mechanically seamed curved panel systems to accommodate a variety of architectural requirements. Designed for arched canopies and walk way covers, Englert’s curved versions of the popular A1300, A1301 and S2400 profiles meet the needs of today’s architects.

Depending on the panels selected, these curved systems can be installed over solid decking or open steel. In addition, weather tightness warranties are available for these curved systems.

10

MaterialMinimum Radius

1” SeamA1301 A1300 S2400

211 / ” Seam 2” SeamConvexCurve

TaperedCurve

EllipticalCurve

Aluminum(up to .040”) 24” 24” 118” Yes Yes Yes

Copper(up to 20 oz.)

Steel(up to 24 ga.) 60” 100” 118” Yes Yes Yes

24” 30” 118” Yes Yes Yes

Stainless Steel(up to 26 ga.) 120” 160” 118” Yes Yes Yes

• = Pending. All testing to be completed by December 2014.

*Contact Englert for specific materials tested, test parameters and limitations of each product before specifying from this chart.

Insulated Metal Panels (IMP’s)

IMP 100

IMP 200

IMP 300

IMP 400

IMP 500

Product*

ASTM283

ASTM331

ASTM1592

ASTM84

FM4880

FM4881

Aluminum CompositePanels

CS 500

CWP 200

CWP 400

CWP 430

CWP 600

CWP 630

Product*

ASTM283

PaintPerformance

SpecsASTM330

ASTM331

ASTM1233

ASTM84

AAMA501

ASTM283

PaintPerformance

Specs

Product* Testings and Co-Listing

Uniline R

Uniline RW

Uniline C-36

Uniline 4.2

2.67” x .5”

2.67” x .75”

2.67” x .875”

A-4000

B-4000

B-4000 R

H-12/1, 2, and 3

H-16/1, 2, and 4

E-6/6 CF

ASTM330

ASTM331

ASTM84

Commercial/Industrial

WALL PANELSEnglert is distinctive for its ability to provide you with a broad range of wall panel systems for a wide variety of design purposes. Choose from one or more of our commercial-industrial, aluminum, composite or insulated wall panel systems to enrich the look and function of any project you design. Select from a full line of Englert wall panel systems to give your building a unique look and feel.

11

ALUMINUM COMPOSITEWALL PANEL SYSTEMSOur aluminum composite material (ACM) Wall Panels are outstanding for their light weight, durability, and design consistency. Capable of accommodating a variety of geometric shapes, Englert’s ACM Wall Panels give architects the opportunity to employ more imaginative and creative designs. They are available in a variety of standard and custom colors, all in 4 mm and 6 mm with a premium Kynar 500® PVDF resin-based coating.

Englert’s full line of aluminum composite wall panels can be formed to accommodate the simplest and most complex geometry, including curves. The wall panels are designed to meet all applicable ASTM tests, as well as impact resistance..

Go to englertinc.com for more information on:

• Aluminum Composite Wall Panels• Commercial/Industrial Panels - Concealed Fastener• Commercial/Industrial Panels - Exposed Fastener• Insulated Metal Wall Panels

Englert ACM wall panels are available for use in three different applications: • Rain Screen System—a sequentially installed wall panel that can employ an integral accent strip and utilizes a continuous attachment method. • Wet Joint System—a sequentially installed flush caulk joint wall panel system with a continuous clip. • Dry Gasket Joint System—A sequentially installed dry seam wall panel system with integral weather stripping and hidden fasteners.

12

CWP 600 The CWP 600 is a sequentially installed, gasketed wall panel system that employs integral weather stripping and hidden fasteners.

The Englert CWP 600 series can accommodate intricate corners, curved walls, simple fascias, and various soffit and parapet conditions. All panels are assembled using proprietary internal extrusions that provide a rigid perimeter, producing a stiff panel that resists deflection and modulation.

CS 500The Englert CS 500 ACM Wall System is a continuous edge grab system with a 1/2" depth. The ends of the panel’s core are routed and slide into an exposed mullion attachment system that gives the system its aesthetic flat panel look while still meeting ASTM system requirements. Unlike bulky route and return systems, the CS 500’s 1/2" depth makes it ideal for exterior and interior applications where space and aesthetic appearance are a consideration. It is also more economical than standard route and return systems.

CWP 200

CWP 400 The CWP 400 is a sequentially installed flush caulk joint wall panel system that employs a continuous clip attachment method with backer rod and caulk joint.

The Englert CWP 400 series can accommodate intricate corners, curved walls, simple fascias, and various soffit and parapet conditions. All panels are assembled using proprietary internal extrusions that provide a rigid perimeter, producing a stiff panel that resists deflection and modulation.

The CWP 200 wall panel system is a sequentially installed rain screen system that can employ an integral accent strip and fixed attachment method.

The Englert CWP 200 series can accommodate intricate corners, curved walls, simple fascias, and various soffit and parapet conditions. All panels are assembled using proprietary internal extrusions that provide a rigid perimeter, producing a stiff panel that resists deflection and modulation.

CWP Series

ALUMINUM COMPOSITE WALL PANEL SYSTEMS

13

The Series A4000 flush interlocking wall panel system provides consistently smooth wall surfaces. Unobtrusive vertical seams with concealed integral fasteners are secured without the need for additional clips or mechanical seaming. Optional stiffeners are recommended for lighter gauge material. The panels also may be detailed in combination with insulation to produce an insulated siding system.

A4000 CFThe Series E-6/6 is a 12" wide concealed fastener wall panel, recessed every 6" to provide a shadow effect. The Englert Series E-6/6 is a true concealed fastener shape that can be used alone or in combination to create interesting, highly architectural effects.

CF Series

E-6/6 CF

Englert offers a wide range of traditional concealed and thru-fastened wall panel systems that can be installed horizontally or vertically for all kinds of commercial and industrial use. Our commercial-industrial systems are available in a wide range of colors all in a Kynar 500® paint finish that meet specific aesthetic and corrosion

resistance requirements. Architects and builders can choose from a variety of Englert’s economical and durable wall panel systems, suitable for use in pre-engineered metal building applications, agricultural structures, commercial buildings, and industrial buildings.

COMMERCIAL/INDUSTRIAL WALL PANEL SYSTEMS

14

Horizontal Series

COMMERCIAL/INDUSTRIAL WALL PANEL SYSTEMS: CONCEALED FASTENER

The Englert h-12 and h-16 series wall panel systems provide architects and designers with the definitive solution to design versatility. These multi-purpose metal wall panels feature a concealed fastener system with a fastening leg, and lock, that is hidden. Panels are coated with an ULTRA-Cool™, Kynar 500® paint finish.

h-16/1 is a 16" coverage panel, 7/8" deep with a single rib designed for use when a wider rib design is preferred for aesthetic considerations.

h-12/1 h-16/1The Englert h-12/1 is a 12" coverage panel, 7/8" deep with a single rib ideal for architectural applications demanding a flat appearance.

h-12/2 h-16/2The Englert h-12/2 is a 12" coverage panel, 7/8" deep with two ribs uniformly spaced and designed for use in architectural applications demanding a flat appearance.

The Englert h-16/2 is a 16" coverage panel, 7/8" deep with two ribs uniformly spaced and designed for use in architectural applications demanding a flat appearance.

“H” SERIESWALL PANEL SYSTEM

H-16/4

h-12/3 h-16/4The Englert h-12/3 is a 12" coverage panel, 7/8" deep with three ribs uniformly spaced ideal for architectural, commercial and industrial applications demanding a bolder surface appearance.

The Englert h-16/4 is a 16" coverage panel, 7/8" deep with four ribs uniformly spaced to create a bolder surface appearance for architectural, commercial and industrial applications.

15

2.67" x .5"

Corrugated Series

The 2.67" x .5" corrugated wall panel system is ideal for standard applications requiring both durability and economy.

2.67" x .875" The Englert 2.67" x .875" corrugated wall panel system is specifically designed for use in industrial applications. With a deeper corrugation, this panel provides increased load carrying capacity and adds heavier shadow lines.

2.67" x .75" The 2.67" x .75" corrugated wall panel system is specifically designed for use in industrial applications where strength is important. With a deeper corrugation, this panel provides increased load carrying capacity and adds heavier shadow lines.

16

The Uniline C-36 wall panel is 1.5" deep with symmetrically spaced ribs at 7.2" on center making it ideal for use in a variety of applications. Uniline C-36 wall panels have a trapezoidal profile and can be installed either vertically or horizontally for a more dramatic effect, particularly in architectural applications.

7.2" x 1.5" Uniline C-36

The Uniline 4.2 Rib wall panel is a traditional 1 1/16" deep 4.2 symmetrical ribbed wall panel. Typically used in an industrial application, these wall panel systems are ideal for use in retrofit applications on older buildings.

Uniline Series

4.2" x 1.0625"Uniline 4.2 Rib

COMMERCIAL/INDUSTRIAL WALL PANEL SYSTEMS: EXPOSED FASTENER

1.25" Uniline RThe Uniline “R” wall panel system, the staple of the metal building industry, combines strength with a deep, wide panel profile for a clean, bold look. The wall panel is easy to install and is designed for maximum durability. Available in all Englert standard Kynar® colors.

1.25" Uniline RW The Uniline “RW” wall panel is a semi-concealed fastener wall panel that combines form and function. With its recessed channels housing its fasteners, the “RW” creates a smooth, flat wall appearance. This durable wall panel system is a good choice for standard wall applications where architectural detail is important. The “RW” wall panel provides a striking wainscoated architectural effect.

17

IMP 200

IMP Series

INSULATED METAL WALL PANEL SYSTEMSEnglert’s insulated metal panels (IMP) are offered in a variety of profiles and colors to provide the versatility you need when designing your project. Combine any one of our IMPs with our other wall panel choices to maximize your design objectives

quickly and easily. Please refer tp Englert’s IMP color chart for our standard Kynar® color availability.

The IMP 200 is known for its ease of installation and features an embossed metal, stucco texture that mimics the look of a masonry stucco finish.

The IMP 100 is excellent for horizontal and vertical use and has a smooth, flat appearance, good for high-profile applications. The IMP 100 is less expensive than competitive high-profile products.

IMP 100

18

IMP 300

IMP Series

INSULATED METAL WALL PANEL SYSTEMS

IMP 400

IMP 500

The IMP 400 features a striated exterior finish with a deeper textured effect and can be used for vertical and horizontal applications.

The IMP 500 features a Mesa exterior finish sheet offering a shadow effect. These can be used in lieu of corrugated wall panels and offer a higher “R” value than a field assembled system.

The IMP 300 features a heavy embossed exterior finish and is an excellent alternative to more expensive masonry or tilt-wall construction.

19

SOFFIT PANELSEnglert offers concealed fastener soffit wall panel systems. These products are available in a wide range of colors and gauges, and are factory formed and shipped worldwide in lengths that are available to suit your design needs. Contact Englert for comprehensive load tables and design assistance with any of these profiles.

B4000-1" Flush Soffit Panel

Englert’s B4000 flush interlocking panel system with a smooth soffit surface is ideal for applications where a flush or flat appearance is desired. A concealed fastening system improves the flush appearance while providing additional strength. Optional stiffeners are available to ensure flat, level planes.

B4000 R Flush Soffit Panel

B4000 R flush interlocking panel system with a

one-inch reveal is for applications where a shadow appearance is desired. The B4000 R has a concealed fastening system that improves the flush appearance while providing additional strength. Optional stiffeners are available to ensure flat, level planes.

E375—3/8" Soffit Panel

Englert E375 Commercial/Residential Soffit Panel in solid or vented styles features 3/8" Deep V Groove, unobtrusive seams with positive lock and concealed fasteners and net free ventilation area (NFVA) of 10.12 square inches per square foot.

B4000-1"Flush Soffit Panel

E375-3/8"Soffit Panel

B4000-RFlush Soffit Panel

20

GUTTER SYSTEMS

LeafGuard

LeafGuard is a rain gutter protection system with a one-piece, patented, debris shedding design that is better than any other gutter on the market today. It features a hood built into the gutter itself – not added on to it, or attached above it – making LeafGuard functionally and aesthetically better than gutter covers, gutter screens, gutter hoods, or gutter helmets. LeafGuard is designed to enhance the beauty of any home design.

RainPro

The RainPro Design Series gutter system is the only gutter on the market today with the capacity of a 6" gutter, and a unique design with a touch of elegance that complements the distinctive lines, flourishes and shapes of exterior moldings and other exterior ornamentation that people choose for their homes and commercial buildings. RainPro’s wider gutter bottom and larger 3 3/8" outlet gives your home design a dramatic increase in water flow capacity compared to a 5" gutter system which only has a 2 3/8" outlet.

7" Box Gutter

The Englert 7" Box Gutter profile is designed for use in commercial and light industrial applications where an attractive, yet functional, rain carrying system is required. The large 7" trough is capable of handling high volumes of water that are typically found draining from larger commercial roof installations.

RainPro (Pictured with MicroGuard)

LeafGuard

7" Box Gutter

RainPro

21

Renewable Solar Energy Systems From Englert

Englert Environmental offers two building integrated photovoltaic (BIPV) standing seam roofing technologies that work in conjunction with its metal roofing systems for delivering solar-generated electricity.

SunNet™ Building Integrated Photovoltaic Systems (BIPV)

Englert SunNet™ BIPV is a state-of-the-art thin-film solar photovoltaic laminate that easily integrates onto the surface of Englert standing seam panels. When exposed to sun light, these solar laminates produce electricity even in cloudy low light conditions. Electricity generated by

the laminate is fed back through the electrical meter into the power grid. SunNet™ BIPV is an ideal fit for curved panel applications and over the apex of a roof, providing architects and designers with a new range of possibilities, all with a powerful, durable, energy generating solution. These systems offer an alternative or addition to polycrystalline photocells and capture the sun's energy from dawn till dusk.

Crystalline Solar Energy Systems

Englert photovoltaic crystalline solar systems generate electricity which can be fed back through the electric meter to the power grid as well. These crystalline arrays boost the effectiveness of Englert’s ULTRA-Cool™ roofing materials by shading the roof to reduce air conditioning loads.

ENGLERT RENEWABLE ENERGY SOLUTIONSEnglert Environmental is a leading provider of solar photovoltaic and solar thermal roofing technology and commercial and residential rainwater harvesting systems that integrate with the world’s finest metal roofing and rainware products. Because of its commitment to world

leading, best-of-breed technology, products and services, Englert is able to provide the highest productivity, financial savings and return on investment.

Englert Environmental is a leader in the development and implementation of integrated roofing technologies that can cost effectively reduce fossil fuel energy usage and air pollution and better manage our dwindling water resources.

Crystalline Solar Panels

SunNet™ Thin Film Laminate

22

Solar Thermal Energy Systems

Englert Environmental also offers an integrated solar thermal energy system mounted under the Englert standing seam metal roofing panels which act as a component of the thermal system, radiating and pro-viding heat to a grid work of purlins which hold and heat a water/glycol mixture that is circulated through cross-linked poly ethylene tubing. heat from the glycol mixture is cycled through conventional heat transfer and distribution systems, offsetting the need for fossil fuels and electricity used for heating domestic hot water. The system can be reversed in wintertime, pumping the hot glycol mixture back to the roof area where it can be used to melt snow.

When used in conjunction with integrated technologies like Englert SunNet™ BIPV or our Crystalline arrays this solar thermal system can reduce homeowner energy bills from 20 – 80% a year.

Rainwater harvesting Systems

The population continues to grow in America but water resources in many areas are finite and engineers and architects must come up with new solutions to meet demands. Englert offers a solution that integrates its roofing and rainware products with the most advanced rainwater harvesting systems in the country today. The Englert Rainwater harvesting System integrates Englert’s Kynar-coated ULTRA-Cool™ standing seam metal roof system, a choice of several extremely effective leaf protection systems and any one of Englert’s residential or commercial rainwater harvesting systems that can capture water for a variety of non-potable uses including landscape irrigation, car washing and waste disposal. No longer must building professionals and homeowners gather components from different resources. Now they can order a single system from a single source with professional technical service support for installation. Englert also teams with large com mercial builders and architects to provide systems for educational, government and retail applications.

Whether the project be solar or rainwater harvesting, Englert gets an understanding of what an architect or builder wishes to achieve, conducts an audit to determine if the structure is suitable for a resource recovery system and prepares a detailed proposal for a system including government and utility rebates and all required building and other permits.

Energy Monitoring Systems | ULTRA-CoolTM Metal Roofing Systems | Crystalline Solar Panels for Metal

The Englert Solar Sandwich | Solar Thermal Energy Systems | SunNet™ BIPV Systems | Rainwater harvesting Systems

Visit www.englertinc.com/englert-environmental for more information on:

23

Englert’s in-house continuous coil coating line processes product in five basic steps. The base metal is cleaned in an alkaline bath, rinsed with hot water, and chemically pretreated using a dried-in-place pretreatment. Next, a primer is applied, and then baked on, followed by an oven cured top coat.

Typical substrates coated are aluminum, hot dipped galvanized steel, Galvalume®, and cold rolled steel. Coatings that can be applied are acrylics, polyesters, plastisol, siliconized polyesters, full strength 70% Kynar 500®/hylar 5000® fluorocarbons. Finishes can be applied to either the top side or both sides of the substrate.

Englert’s coil coating line is equipped with quick change heads, so color changes can be accomplished without line shutdown, facilitating the coating of a wide range of finishes in minimum quantities.

Englert’s in-house paint line also has the ability to apply a thick film Kynar based paint system that is capable of withstanding 100 liters plus of falling sand as required in many government specifications.

COATINGS AND TEChNOLOGY

24

Galvalume® and Galvalume Plus® are registered trademarks of BIEC Industries Inc.ULTRA-Cool™ is a trademark of the PPG Corp.

Kynar 500® is a registered trademark of Atofina Chemicals Inc.hylar 5000® is a registered trademark of Ausimont USA Inc.

Custom ColorsEnglert offers a wide range of custom colors with short lead times and low minimum order requirements depending on the type of substrate. Englert can match the color of virtually any material, including brick, wood and fabric.

Perma Color 3500/PermaMetallics 3500These low gloss ULTRA-Cool™ Kynar coatings are comprised of 70% Full Strength Kynar 500®/hylar 5000® fluorocarbon (Polyvinylidene fluoride PVDF) coating over a urethane primer. Both carry a 35 year paint finish warranty. (The reverse side consists of a primer and a wash coat.)

ULTRA-Cool™ is state-of-the-art when it comes to energy-efficient metal roofing. Using PPG’s ULTRA-Cool™ coatings, ULTRA-Cool™ colors meet Energy Star’s® specs for Initial Solar Reflectance for Cool Roofs and not only saves energy but money as well because:

• heat is reflected away from the building• Smog is reduced when environmental temperatures

are reduced• Energy costs are saved because of cooler interior spaces• Life expectancy of the roof is increased due to less

expansion and contraction• Monetary incentives are increasingly being offered

for switching to reflective roofing products• They meet the LEED® 2.2 Solar Reflective Index

Galvalume-Plus®Englert now offers the cutting edge in metal roof technology – a premium steel product known as Galvalume-Plus®. This product has the advantage of an acrylic coating to reduce mill finish discoloration and uneven weathering. This metal is available as a new hi-tech solution to standard uncoated steel.

TexturingEnglert has the capability to provide several textured effects in its various roof systems. Stucco embossing, the most popular, lends a unique patterned appearance greatly diminishing glare and unevenness in formed metal panels.

StriatingStriating is a process of adding light vertical lines to the broad face of the metal roof panels at the last stage of roll forming. This process induces a shadow form effect. Combined with our low gloss Kynar coating it helps reduce oil canning, giving the system a smooth, linear appearance.

Oil-CanningThe roll forming process can sometimes result in inherent surface unevenness. This is referred to as “oil-canning.” This condition is also caused by thermal expansion and contraction, dark colors, high gloss finishes and uneven substrate. “Oil-canning” in and of itself is not sufficient cause for material rejection.

COATINGS AND TEChNOLOGY

25

An Englert metal roof presents architects and builders with the capability to collect more than a dozen credits in designing a LEED® accredited project. Our coatings have both the high reflectance and high emittance necessary to meet LEED® requirements for cool roofing. An Englert steel or aluminum standing seam roof qualifies for LEED® credit requirements for recycled content and recyclability. Our metal roofs are excellent for the recovery and reuse of non-potable water, an important factor in earning LEED® water efficiency credits. An Englert metal roof provides both the critical platform and the shelter for the new rooftop solar photovoltaic and thermal technologies that earn LEED® credits for energy efficiency.

Best of all, an Englert metal roof provides strength and versatility, is maintenance free and comes in dozens of standard and custom ULTRA-Cool™ colors to fit your personal preference.

Englert metal roofing products contribute significantly to the sustainable building movement. As an active member of the U.S. Green Building Council, we were one of the first roofing manufacturers in the world to offer our customers an ULTRA-Cool™ roofing product. We have worked closely with renewable energy companies to manufacture metal roofing products that can conserve and recycle energy and water for a better environment.

Englert and LEED®: PERFECT TOGEThER

26

Pre weatheredGalvalume®

PermaColor 3500—Full Strength 70% Kynar 500®/Hylar 5000®

Mill Finish

Royal Blue hartford Green

Dark Bronze Mansard Brown

Burgundy Pacific Blue

Forest Green Matte Black Medium Bronze

Colonial Red Slate Blue Everglade Moss

Charcoal Gray

Sierra Tan Deep Red Terra Cotta Patina Green Slate Gray

SandstoneSunNet™ Blue Bone White hemlock Green

Dove Gray Stone White

Metallic Copper

ChampagneGalvalume-Plus®R.68

**PermaMetallics 3500

**These are premium priced paint systems that carry a 35 year paint finish warranty.

Contact Englert directly at 1-800-364-5378 for current LEED™ compliant information. Due to the limitations of printing processes, this color chart is not an accurate representation of our actual colors. Sample chips are available on request at no charge. All Englert colors a re Energy Star® compliant.

27

At Englert, we understand that the responsibility for delivering the best metal roofing and wall panel solutions for your client’s new building or renovation is ours. Beyond our extensive line of architectural and structural roofing products and services, we also offer you the essential information you need for the optimal building envelope design.

Based upon an understanding of the building requirements, we work with you and your contractor to properly prepare specifications that meet your client’s needs and budget. Englert is your roofing and wall panel resource, providing cutting edge information to architects and specifiers throughout the United States.

Our fully trained staff of architectural representatives and engineers is available to make sure your projects run smoothly. We provide design professionals like you with services that make your life easier, from education to spec development. With a variety of AIA registered programs

to choose from (Go to www.englertinc.com for more information), we offer architects the hands-on expertise and information they need about metal materials and components to optimize a project and minimize architectural liabilities. Our architectural representatives are available to present these seminars at your office or in your local area upon request.

We are a member of the U.S. Green Building Council. We offer a full line of LEED® and Energy Star® compliant building envelope systems complete with the company’s own integrated rooftop solar photovoltaic, solar thermal and rainwater harvesting products. And our technical and advisory staffs have authored numerous articles on metal roofing’s contribution to the sustainable building movement including its energy efficiency, high recycled content, total recyclability, water efficiency and energy and atmosphere LEED® credit programs.

® 1200 Amboy Avenue, Perth Amboy, NJ 08861Phone: (732) 826-8614 • Fax: (732) 826-8865 www.englertinc.com

FOR ThE ARChITECT

90300A-13