enovia portal solutions v5.8 enhancements in enovia ... - ibm

Software AnnouncementFebruary 12, 2002

ENOVIA Portal Solutions V5.8 — Enhancements inENOVIA Portal Solutions

OverviewENOVIA Portal Solutions are acomprehensive set of scalableWeb-based, Windows and UNIXproducts that enhance collaborativeinnovation during the productlifecycle.

With ENOVIA Portal Solutions, youcan:

• Propagate and share 3D productdata and criticalproduct-development informationthroughout the extendedenterprise

• Access ENOVIA data as well asdata from other enterpriseinformation systems, includingCAD, PDM, Legacy systems, andother Web-based data, to all theparticipants in theproduct-development process

ENOVIA Portal Solutions consists of:

• ENOVIA 3d com Configurationsand Products

• ENOVIA Digital Mock-Up (DMU)Configurations and Products

• ENOVIA Multi-PDM Products (foruse with ENOVIA 3d comproducts)

• ENOVIA Multi-CAx Products (foruse with both ENOVIA 3d com andENOVIA DMU products)

In V5.8, two new DMU products, RealTime Rendering 1 and Real TimeRendering 2, extend visualizationcapabilities to evaluate and exploitthe finest details of a rich digitalmock-up.

• Real Time Rendering 1 enablesdesign review teams to leveragetechnological materialspecifications into realisticrenderings of models.

• Real Time Rendering 2 takesadvantage of all availablehardware features to interactivelycreate realistic renderings andanimations in real-time, providing

the ultimate dynamic andinteractive display of a mock-upfor efficient design visualization,evaluation, and validation at anystage of the product-developmentprocess.

Through ENOVIA MultiPDMSmarTeam Plug-in, a new ENOVIAMultiPDM product, ENOVIA 3d comNavigator users can visualizeSmarTeam data via the Web.

Enhanced in ENOVIA Portal SolutionsV5.8:

• Nine 3d com and DMUconfigurations

• Two 3d com products and/orfeatures

• Thirteen DMU products and/orfeatures

• Four MultiPDM products and/orfeatures

• Eight MultiCAx products and/orfeatures

Key PrerequisitesWorkstation platforms:

• Intel -based Windowsworkstations

• RS/6000• HP-UX 9000 Series• Sun Solaris SPARC system family• Silicon Graphics (SGI)

A properly sized database isrequired, using either theDATABASE 2 , (DB2 ), or theOracle database manager.

Planned Availability Date

February 15, 2002

At a Glance

ENOVIA Portal Solutions V5.8includes:

• Two new DMU products — RealTime Rendering 1 and RealTime Rendering 2

• A new MultiPDM product —SmarTeam Plug-in

• Nine enhanced 3d com andDMU Configurations

• Six 3d com products and/orfeatures

• Thirteen enhanced DMUproducts and/or features

• Four enhanced MultiPDMproducts and/or features

• Eight enhanced MultiCAxproducts and/or features

This announcement is provided for your information only. For additional information, contact your IBM representative,call 800-IBM-4YOU, or visit the IBM home page at: http://www.ibm.com.

IBM United States IBM is a registered trademark of International Business Machines Corporation. 202-026

Description

The ENOVIA Portal makes product-developmentinformation immediately comprehensible. ENOVIA Portaladdresses the development community, as well as theparticipants in the wider enterprise, including sales,procurement, management at all levels, partners, andsuppliers. Such company-wide collaboration increasesthe potential for innovation.

ENOVIA Portal is a comprehensive set of scalable Websolutions for the digital enterprise made up of the ProductLifecycle Management (PLM), CRM, SCM, and ERPdomains. It makes available the information from relatedinformation systems, plus legacy data, files, CAx, andother Web-related data.

It generalizes the use, manipulation, and analysis ofgraphical data for enterprise decision support. Supportis offered for multisource engineering design,manufacturing, and service data. ENOVIA Portalpromotes multi-functional support and product/processoptimization. Visualization, analysis, and simulation toolsare available that address the requirements of thebeginner and the experienced user. Intuitive visualizationand navigation through a 3D product along with completeanalysis and simulation for the experienced user areincluded. ENOVIA Portal provides an Effects Library, acompilation of scientific and engineering knowledge thatcan drive the development process down theknowledge-based innovation pathway.

ENOVIA Portal comprises a base Web access componentupon which optional multi-PDM and multi-CAx plug-inscan be added. Value-added solutions on top of the baseinclude a set of 3D Web visualization anddata-management solutions, plus an advancedWindows-compatible component for 3D and 4D DMUmanipulation.

ENOVIA Portal Solutions Function Matrix

DMU Functions and Products

ENOVIA DMUFunctions DMU Configurationsand Products DM1 PS1 DM2 DPS DH2 DM3

ENOVIA DMU I I N N N NNavigator 1

ENOVIA DMU N N I I I NNavigator 2

DMU Navigator 3 N N N N N IENOVIA DMU Digital A I A A A A

Plant & ShipReview 1#

ENOVIA DMU A A A A A ADimensioning &TolerancingReview 1#

ENOVIA MultiCAx Functions

ENOVIA MultiCAx I I I I I ICATIA Plug-in

ENOVIA MultiCAx I I I I I IDELMIA Plug-in

Common (CATIA & ENOVIA) SolutionsFunction Matrix

DMU Functions and Products

Common DMUFunctions DMU Configurationsand Products DM1 PS1 DM2 DPS DH2 DM3

Real Time I I I I I IRendering 1*

DMU Space A A N N N NAnalysis 1#

DMU Space N N I I I IAnalysis 2#

DMU Fitting N N S I S SSimulator 2

DMU Fitting N N A I A ASimulator 2#

DMU Kinematics N N S I S SSimulator 2

DMU Kinematics# N N A I A ASimulator 2

DMU Optimizer 2 N N S S S SDMU Optimizer 2# N N A A A ADMU Eng Anal Rev 2 N N S S S SDMU Eng Anal Rev 2# N N A A A APhoto Studio 2 N N S S S SPhoto Studio 2# N N A A A AHuman Builder N N S S I SHuman Builder# N N A A I AHuman N N S S I S

MeasurementsEditor

Human N N A A I AMeasurementsEditor#

Human Posture N N S S I SAnalysis

Human Posture N N A A I AAnalysis#

Human Activity N N S S I SAnalysis

Human Activity N N A A I AAnalysis#

Real Time N N S S S SRendering 1*

Real Time N N A A A ARendering 2*

Common MultiCAx DMU ConfigurationsFunctions and DM1 PS1 DM2 DPS DH2 DM3Products

MultiCAx —P Plug-in S S S S S SI Plug-in S S S S S SU Plug-in S S S S S SSE Plug-in S S S S S SAD Plug-in S S S S S SSolidworks S S S S S SPlug-in

202-026 -2-

ENOVIA Portal Solutions Function Matrix

3d com Functions and Products

ENOVIA 3d comFunctions and 3d com ConfigurationsProducts N3G C3V E3M

3d com Navigator I I I3d com Publish I N N3d com Navigator V5 I I N

Plug-in3d com Effects Plug-in N N I3d com Effects Library N N I3d com Space Analysis S S N

ENOVIA 3d com MultiPDM Functions and Products

ENOVIA-MultiPDM —PM Plug-in I N NCDM/VPM Plug-in I N NLCA Plug-in I N NOP Plug-in S N NPlug-inSmarTeam Plug-in S N N

ENOVIA 3d com MultiCAx Functions and Products

MultiCAx — CATIA I I NPlug-in

MultiCAx — DELMIA I N NPlug-in

Common 3d com MultiCAx Functions and Products

MultiCAx —P Plug-in S S NI Plug-in S S NU Plug-in S S NSE Plug-in S S NAD Plug-in S S NSolidworks S S NPlug-in

Matrix Legend

* = New Functions in V5.8# = Previously announced function/product with new5693 product typeI = Functions are included in the configurationA = Functions are available as an add-on productto be used with the configurationS = Functions are available as a shared product tobe used with the configurationN = Functions are not usable with this configuration

Accessibility by People with Disabilities

These products and features have been granted adeviation exception for 2002.

Euro Currency

These programs are not impacted by euro currency.

Product Positioning

Refer to Software Announcement 201-138, datedMay 1, 2001, for details.

Hardware and Software Support Services

SmoothStart /Installation Services

SmoothStart and Installation Services are not provided.

Reference Information

For announcement details from the previous release ofENOVIA Portal Solutions, V5.7, refer to SoftwareAnnouncement 201-180, dated June 26, 2001.

Trademarks

DATABASE 2 and SmoothStart are trademarks ofInternational Business Machines Corporation in the UnitedStates or other countries or both.RS/6000 and DB2 are registered trademarks of InternationalBusiness Machines Corporation in the United States or othercountries or both.Intel is a registered trademark of Intel Corporation.Windows is a registered trademark of Microsoft Corporation.UNIX is a registered trademark is a registered trademark ofthe Open Company in the United States and other countries.Other company, product, and service names may betrademarks or service marks of others.

-3- 202-026

IBM USAnnouncementSupplemental Information

February 12, 2002

Additional Information

This section describes the new products andenhancements to previously announced productsdelivered in this release. Refer to the ENOVIA PortalSolutions Function Matrix section for details. For fulldescriptions of new and previously announced ENOVIAV5 products, visit:

http://www.ibm.com/solutions/engineering/eshome.nsf/public/catmain

From the menu frame select ENOVIA Products to get tothe ENOVIA page. From the menu frame on the ENOVIApage, select ENOVIA V5.

New or Enhanced in ENOVIA Portal Solutions V5.8

ENOVIA 3d com Configurations:

• ENOVIA — 3d com Navigator Configuration (5691-N3G)

The functionality of “ENOVIA MultiPDM — SmarTeamPlug-in” is available as a Shared product with the ENOVIA3d com Navigator Configuration (5691-N3G). Refer to theproduct details below for a description of the SmarTeamPlug-in product.

ENOVIA 3d com included/BASE products

ENOVIA — 3d com Navigator (N3R)

• Infrastructure enhancements. With V5.8 the followingfunctions are enabled on WebSphere ApplicationServer to provide users with faster log-in and overallbetter performances for basic functionalities.

− Settings enhanced− Workbook server enhancements− Single sign-on function

Viewing Capability enhancements

• 2D Local Viewer

− V4/V5 server parity: all V4 server capabilities arenow available on the V5 server

− Read data stored in ENOVIAVPM vault with the V5server

− Specific V5 server new capabilities including: readTIFF Multi-page; read V4 Raster data; print onremote printer from local

• 3D local viewer

− V4/V5 server parity: all V4 server capabilities arenow available on the V5 server except commentsand sag

− The ability to read data stored in ENOVIAVPM′svault with the V5 server

− Specific V5 capabilities enhanced including: displaymode; edges; HLR; wireframe; 3D text; minimumdistance between two spaces.

• 3D remote viewer

− V4/V5 server parity: all V4 server capabilities arenow available on the V5 server except comments,generate VRML, and sag

− V5 only capabilities enhanced including: pick vertexonly; visualize V4 elements in No Show; hideelement

• Data access and Meta Search enhancements

− Meta search installation simplification− DLnames drivers on V5 server

ENOVIA — 3d com Publish (P3B)

• Major product enhancements with V5.8 are:

− The ability to publish to external applicationrepository

− Japanese character support for snapshot HTMLpages

− The ability to publish multi-models

ENOVIA — 3d com Scientific Effects Library (E3L)

• No ENOVIA V5.8 enhancements

ENOVIA — 3d com Scientific Effects Plug-in (E3P)


ENOVIA 3d com Products

ENOVIA — 3d com Space Analysis Product (5691-S3P)


ENOVIA — 3d com MultiPDM included/BASE products

ENOVIA — 3d com MultiPDM PM Plug-in (PML)

• Bookmark persistency enhanced

• The ability to select the number of results to bedisplayed for a query directly from the log on panel

• BOM explosion enhancements when selectingCDP/CDM configuration (available throughcustomization)

ENOVIA — 3d com MultiPDM CDM/VPM Plug-in (VPL)

• Enhanced CATIA V5 interoperability• Usability improvements

ENOVIA — 3d com MultiPDM LCA Plug-in (LCL)

• Customization available to update clash databases byediting clash status and user comments attributes.

This announcement is provided for your information only. For additional information, contact your IBM representative,call 800-IBM-4YOU, or visit the IBM home page at: http://www.ibm.com.

IBM United States IBM is a registered trademark of International Business Machines Corporation. 202-026

ENOVIA — 3d com MultiPDM Products

ENOVIA — 3d com MultiPDM OP Plug-in 5691-OGL


ENOVIA — 3d com MultiPDM SmarTeam Plug-in(5691-SML). A new V5.8 product.

Product Description

• The ENOVIA MultiPDM SmarTeam Plug-in provides theENOVIA 3d com Navigator users with the followingcapabilities:

− Connection and easy logon to any SmarTeamdatabase. The search tree can be customized toallow access to the SmarTeam database.

− The ability to access SmarTeam data, documents,projects, and folders (read only mode). The datacan be accessed using a standard 3d com query(the ability to query projects and documents) andsimple and extended queries using SmarTeamclasses and attributes. The results of the query canthen be bookmarked. Project tree access providesthe ability to access documents using navigationthrough the Projects Tree. Bookmark accessprovides the ability to access a bookmarkeddocument.

− The hierarchical navigation in SmarTeam Dataincluding the navigation in theProject/Folder/Documents trees and the ability todisplay hierarchical structure of documents.

− The access to Data Properties including the abilityto access SmarTeam project/folder/documentproperties as defined in SmarTeam databases andthe ability to preview embedded image files(snapshots associated with documents inSmarTeam databases).

− The ability to open SmarTeam documents in theappropriate viewer including the ability to open acomplete assembly structure made of severalCATIA documents using the 3d viewer and theability to open a CATIA drawing in 2D mode.

ENOVIA DMU Configurations:

• ENOVIA — DMU Review 1 Configuration (5691-DM1)

• ENOVIA — DMU Digital Plant and Ship Review 1Configuration (5691-PS1)

• ENOVIA — DMU Review 2 Configuration (5691-DM2)

• ENOVIA — DMU Digital Product Synthesis 2Configuration (5691-DPS)

• ENOVIA — DMU Human Simulation 2 Configuration(5691-DH2)

• ENOVIA — DMU Immersive Review 3 Configuration(5691-DM3)

The above ENOVIA V5.8 DMU Configurations have alladded the functionality of the new product Real TimeRendering 1 and the P2 and P3 DMU Configurations canalso add the functionality of Real Time Rendering 2 as aShared or Added product. Refer to the individual productdescriptions below for details on Real Time Rendering 1& 2.

ENOVIA DMU included/BASE products: ENOVIA DMUNavigator 1 (DU1) enhancements include:

• Product Structure enhancements

− Reset position

• Data Management enhancements

− Save As Frozen to manage DMU related documentsfor simple, light save and data exchange

− Generate hcg format from a CATIA or MultiCAD file

− Convert a file in jpg

• The ability to read HPGL2

• Loading performance improvements

• Ergonomy: canonic detection feedback

• Measurement capabilities enhanced including:

− Generic items such as measure settingsmanagement and graphical propertiesmanagement for measures.

− Measure geometry enhancements including:automatic measurement updates in part context;measure surface perimeter.

− Measure mass and inertia by measuring inertia onmulti-selection and groups and measuring exportinertial bounding box values.

In addition to ENOVIA DMU Navigator 1 (DM1)enhancements, ENOVIA DMU Navigator 2 (DMU)enhancements include:

• File and document management including the abilityto import 4Dnav Scene with ENOVIAVPM datasupporting 4DNAV-DMU migration. This release addsthe ability to import application data such as viewpoints, 2D and 3D markers, groups, and sections fromN4D scenes

• Proximity query enhancements with the ability torestrict query to products in show mode or in activatedmode only

• Product structure edition enhancements

− Part and subassembly mirroring

ENOVIA DMU Navigator 3 (DU3) enhancements include:

• VR Devices Support:

− MPK integration to support any display

− Ascension devices for tracking

− SpaceMouse support

− Illumen support

• Tools for review:

− Ability to create viewpoints and explore viewpointsafter the session

− Ability to grab part, move part, and storeassociated track for part motion (requires DMUFitting Simulator 2)

− Action trigger

ENOVIA DMU Space Analysis 1 (SP1 ) enhancementsinclude:

• Measure generic items:

− Ability to choose whether to perform an exact orapproximate measurement

− Measure settings management

− Modify measures graphic properties

202-026 -2-

• Measure geometry:

− Automatic measurement updates in part context

− Measure surface perimeter

• Measure mass and inertia:

− Inertia on multi-selection and groups− Export inertial bounding box values

Note: With V5.8, the following ENOVIA DMU SpaceAnalysis 2 functions are now available in ENOVIA DMUSpace Analysis 1:

• Product to product clash• Clash within a multi-section• Dedicated viewer for conflict analysis• Publish clash results as TXT and XML files• Distance: one multi-section to one multi-section• Distance: inside one multi-section• Section results persistency

In addition to ENOVIA DMU Space Analysis 1 (SPA)enhancements, ENOVIA DMU Space Analysis 2 (SPA)enhancements include:

• Interference analysis enhancements:

− Knowledge-rule based interference computation.

− Manage dead status: ability to flag that a conflictstored in ENOVIA V5 does not exist any more. Thiscapability enriches the clash management bestpractice.

− Use clash features as sensors for simulation.

• Sectioning enhancements:

− Detection of collisions between 2D sections− Persistency of grid parameters− Ability to freeze a section result

• Distance/Band analysis enhancements:

− Use of distance features as sensors for simulation

ENOVIA DMU Real Time Rendering (RT1)

• Real Time Rendering 1 enables design review teams(especially quality review teams) to leveragetechnological material specifications to producerealistic renderings of their model. Texture can becreated from scratch, modified from imported digitalimages, or selected from the included library.Associativity is maintained between the materiallibrary and the material applied to the parts. Materialscan be applied through a specification-driven approachor through simple selection. Real-time displaycomputations quickly convert models to realisticrenderings.

Real Time Rendering 1 offers the following mainfunctions:

− The interactive creation of material appearancesdefinition

− The interactive definition of families of material

− The ability to display material families as analphabetical list

− A specification-driven, intuitive application ofpre-defined materials on parts and products

− The real-time display of textured parts and productsincluding the ability to manipulate the mappingoperator and the texture in the 3D view

− The selection of an environment image

− The intuitive and time-saving management ofmaterial specifications through the tree editor

− Controlled associativity between the materiallibrary and material applied onto parts or products

− Intuitive customizable Windows native UserInterface to reduce the training requirements

− Alternative identical Native Windows NT andUNIX Motif versions for a common userenvironment in mixed networks offering flexibilityof choice

− The support of CATIA V4 2D textures (requires V4integration 2)

ENOVIA DMU Add-on Products

ENOVIA — DMU Digital Plant & Ship Review 1 (5693-PR1)

• No enhancements in V5.8

ENOVIA — DMU Dimensioning & Tolerancing Review 1(5693-DT1)

• No enhancements in V5.8

Common Products, can be ordered with CATIA and/orENOVIA Configuration orders. Products can be Add-onor Shared, Type 5693 or 5691:

Note: More information on the common products can befound in the CATIA V5.8 Software Announcement202-027, dated February 12, 2002.

DMU — Fitting Simulator 2 Product (5691-FIT, 5693-FIT)enhancements are:

• Track definition and use enhancements

• The ability to export/import tracks in XML for dataexchange

• The ability to define and record tracks for manikin′smotion

• The ability to manage speed variation along a trackproviding greater realism to object′s motion simulation

• The ability to create digital experiment and generateclash/distance reporting during simulation in dynamiccollision checking

• The ability to export a V5 track definition in V4 andrebuild a V4 track from these positions

• Dedicated video creation tool

DMU — Kinematics Simulator 2 Product (5691-KIN,5693-KIN) enhancements are:

• Speed and acceleration computation

• The ability to replace joints′ reference elements andto reassemble the mechanism after modification

• The ability to enter user-defined names duringmechanism creation

• The permanent view of mechanism Degrees ofFreedom

DMU — Optimizer 2 Product (5691-DMO, 5693-DMO)enhancements are:

• A new command: Mesh Simplification to create asimplified, lighter representation of a part of assembly.This is an additional simplification method besideswrapping and silhouette to create a lighter mesh withrespect to chosen accuracy. This includes:

-3- 202-026

− Simplifying an input mesh with a user-definedtolerance

− Exporting the simplified result as a CGR, VRML, orCATIA V4 mock-up surface

− Automatically associate simplification as analternate shape

• For silhouette, wrapping, thickness, offset, and meshsimplification commands, multi-selection is possiblewhen “manage as alternate shape” is not activated

• The ability to cumulate mesh simplification directlywith silhouette and wrapping functions to obtain anultra light representation instantaneously

• Improved ergonomic of commands for a betterunderstanding and enhanced ease-of-use

DMU — Engineering Analysis Review 2 Product(5691-ANR, 5693-ANR)

• No enhancements in ENOVIA V5.8

Photo Studio 2 Product (5691-PHS, 5693-PHS)enhancements are:

• Final Gathering allowing a better quality of lightdiffusion while taking into account the light reflectionon all the objects of an environment

• Area lights enhancements (rectangle, disc, sphere,cylinder) enabling soft shadows

• The ability to create a sticker laying on several faces

• Support of multiprocessing machines when computinga shooting

• The ability to create movies based on geometryanimations

• Release 8 brings significant ergonomicenhancements:

− Manipulate the mapping operator and the size of asticker in the 3D view

− Copy wall textures when using the Send Tocommand

− The use of Flip U and Flip V capability when definingwall textures

Human Builder Product (5691-HBR, 5693-HBR)enhancements are:

• Easier and more intuitive manikin positioning

− Switch to Inverse Kinematics mode

− Apply selected portions of global postures

− Reach command enhancements for enhancedergonomy and productivity

− Fine tune manikin postures and poses

• Enhanced manikin-environment interaction

− Attach geometry to segment− Set and modify segment Inverse Kinematics offset

• Human modeling enhancements

− Better accuracy and increased realism with easierhand movements and better hand palmidentification

− Enhanced hand clearance and accessibility analysiswith capability to create only the manikin forearmwith fully articulated hand

− Redefine segment referential to integrateindustry-specific constraints: eye point, hip point,and heel point can be selected as the fixed originof the manikin′s referential

− Snap compass on manikin′s center of gravity

Human Measurements Editor Product (5691-HME,5693-HME) enhancements are:

• Added user-defined geographical populationdatabases

• Enhancements in Anthropometry library management

• Enhancements in Variable Edition by ellipsemanipulation

Human Posture Analysis Product (5691-HPA, 5693-HPA)enhancement is the ability to lock and unlock Degrees ofFreedom.

Human Activity Analysis Product (5691-HAA, 5693-HAA)enhancement is RULA specifications customization: theability to specify user-defined values for RULAspecifications.

Real Time Rendering 2 (5691-RTR, 5693-RTR) A new V5.8product:

Real Time Rendering 2 (RTR) enables quality designreview teams to interactively create realistic and dynamicrenderings and animations in real-time, by extensivelyusing all the hardware features available. The user candynamically create and manipulate materials, lights, andenvironments and immediately view the result of anymodification. By providing the ultimate dynamic displayof your mock-up, Real-time Rendering 2 allows efficientdesign evaluation and validation at any time during theproduct-development process.

In addition to the functions available with Real TimeRendering 1, Real Time Rendering 2 offers:

• Advanced reflection functionalities:

− Non-linear reflections to enhance the objects′specular color and thus slightly improve themock-up visualization quality

− Ability to select one environment image permaterial in order to display reflections that will fitthe object exactly

− Environment image generator: the user can easilycreate his own environment image from the sixfaces of a cube or from an existing scene. Thisimage will be automatically mapped on reflectiveobjects

• The ability to define reusable scene configurations.Users can put their models on stage using thefollowing object representation:

− Light sources− Cameras− Stickers− Environments

• Simple and powerful animation capabilities:

− Turntables: Enables users to generate a sequenceof images representing model rotation around auser-defined axis.

− Extended animation: Manipulation of parameterslike cameras, lights (for instance simulate the daylight evolution), environment (include animationsequence as backgrounds images), and materials(facing, aging)

202-026 -4-

• Catalog of re-usable environments (including lights,camera, environment, and complete scene)

• Interactive creation of material appearance definition:

− Adaptative mapping with manual mode: texturescan cross slightly sharpened edges, thus providinga higher visual quality

− Advanced functionalities on textures: Flip U andFlip V for easy texture manipulation and mapping

MultiCAx — P Plug-In (5691-DPL) enhanced with:

• Associativity on CAD part and assembly• Support of ProE 2001 data• Support of ProE drawing

MultiCAx — I Plug-In (5691-DIL)

• Associativity on CAD part and assembly

MultiCAx — U Plug-In (5691-DUL)

• Associativity on CAD part and assembly• Support of UG drawing

MultiCAx — SolidWorks Plug-In (5691-DSL)


MultiCAx — SE Plug-In (5691-DEL)


MultiCAx — AD Plug-In (5691-DAL)


CAA API Functional Content

ENOVIA — 3d com Navigator API: Component-based APIfor ENOVIA — 3d com Navigator provides two differentdomains of extension and customization:

• The first allows creation of new commands andapplications (“applets”), within ENOVIA PortalSolutions

• The second allows developers to code new drivers toaccess commercial or in-house PDM and MultiCAxsystems from with ENOVIA Portal Solutions

APIs include:

• Portal Base, Webtop Frame, Workshop, Workbenchmanagement, Webtop URL document launching

• Portal Application, Webtree driver

• ENOVMetaSearch, Full text search enabler

Technical Information

Hardware Requirements

ENOVIA DMU Hardware Requirements: The followingrequirements are common to all operating systemssupported by ENOVIA — DMU Products V5. System unitand graphic requirements are platform-specific.

Required Components and Features

• Disk drive: An internal or external disk drive isrequired (minimum recommended size 2 GB) to storeprogram executables (installation of all ENOVIA-DMUProducts requires about 500 MB on Windows, 700 MB

on AIX , HP-UX, or IRIX, 600 MB on Solaris), programdata, usage environment, and paging space.

• Memory: 256 MB of RAM is the minimumrecommended amount of memory for all applications.512 MB of RAM is recommended for ENOVIA — DMUNavigator applications on large assemblies.Requirements may be greater when large amount ofdata are used.

• Internal/external drives: CD-ROM drive is required forprogram installation and access to the onlinedocumentation, which can optionally be downloaded todisk.

• Display: A graphic color display, compatible withselected platform-specific graphic adapter. Theminimum recommended size for usability reasons is17 inches; 800 x 600 and 1280 x 1024 for UNIXworkstations. When selecting a graphic adapter,hardware texturing capability is stronglyrecommended when using ENOVIA — DMU ProductsV5 that use texture mapping, in which case the amountof RAM has to be adequate for the number andcomplexity of textures to be used.

• Keyboard: A specific keyboard compatible withselected installation locale may be required fornational language support.

• Pointing device: Three-button mouse. On Windowsworkstations, a two-button mouse may alternativelybe used (the third button is emulated with a keyboardsequence). The three-button mouse is recommendedfor usability reasons. IntelliMouse (two buttons pluswheel) is an alternative to the three-button mouse onWindows workstations, the wheel acting as the middlebutton and allowing additional manipulations such aspanning and scrolling.

• Optional components and features: A SpaceBall or aSpaceMouse can be used in addition to the standardmouse to perform graphic manipulations (zoom, pan,rotate). The required drivers are delivered with thesedevices. DMU Fitting Simulator 2 (FIT) supports theSpaceBall. The SpaceBall and the SpaceMouse aresupported on both P1 and P2. While in P1, they enablegraphic manipulations (in examine or fly modes), in P2they also make it possible to move objects (parttrajectories in DMU Fitting for example).

The robustness of the overall solution is dependent on therobustness of the operating system and the hardwareenvironment used. Windows NT and UNIX hardwareconfigurations certified by Dassault Systemes for runningENOVIA — DMU Products are published at:

http://www.ibm.com/solutions/plm

Although ENOVIA — DMU Products might run on otherconfigurations or other graphic adapters, incidentsspecific to these configurations or adapters would not beaccepted for support.

Hardware Requirements in a Windows 98 Environment

Note: With V5.8, Windows 95 is no longer supported.

Note: Windows 98 applies only to ENOVIA — DMU P1platforms. Windows 98 clients can use nodelock licensingor can run with Windows NT, Windows 2000, Windows XP,or UNIX license servers.

System unit: Intel Pentium II- or Pentium III- orPentium 4-based workstations running MicrosoftWindows 98

-5- 202-026

Graphic adapter:

• An OpenGL-capable graphic adapter is required. Notethat graphic performance (panning, zooming, rotatingmodel) will depend on the selected graphic adapter.This graphic adapter should have the followingcapabilities:

− 16 bits, high color, double buffered visual

− 16 bits Z-buffer (when hardware accelerated)

− Stencil buffer (1-bit)

− Minimum supported resolution is 800 x 600; aresolution of 1280 x 1024 recommended forusability reasons

• Network adapter: An active LAN adapter (Ethernet ortoken ring, installed and configured) is required forlicensing purposes.

Tested graphic adapters on Windows 98

Whereas Dassault Systemes has certified completeconfigurations (workstation model and graphic adapter)for ENOVIA — DMU Products running on Windows NT,Windows 2000, or Windows XP only generic graphicadapters that have been tested on Windows 98 will bedocumented.

The updated list of these adapters is published on theWeb site:


Hardware Requirements in a Windows NT, Windows 2000,or Windows XP Environment

System unit: Intel Pentium II-, Pentium III-, Pentium4-based workstations running Microsoft Windows NTWorkstation V4.0, Windows 2000 Professional, orWindows XP Professional.

Graphic adapter:

• A graphic adapter with 3D OpenGL accelerator isrequired. Note that graphic performance (panning,zooming, rotating model) will depend on the selectedgraphic adapter. The graphic adapter should have thefollowing capabilities:

− 24 bits, true color, double buffered visual

− 24 bits Z-buffer

− Stencil buffer

− Minimum supported resolution is 800 x 600; aresolution of 1280 x 1024 recommended forusability reasons

Network adapter: An active LAN adapter (Ethernet ortoken ring, installed and configured) is required forlicensing purposes

Supported Configurations of Windows NT, Windows 2000,and Windows XP

An updated list of hardware configurations, certified byDassault Systemes for running ENOVIA — DMU Productsis published on the Web site at:


Hardware Requirements in an AIX Environment

System unit: Any RS/6000 , based on PowerPC 604(166 MHz minimum clock speed), Power2, or Power3processor families, supported on AIX V4R3.3 providedthat requirements described below are met.

Graphic adapter: one of the following:

• GXT500P• GXT550P• GXT800P• GXT800M• GXT2000P• GXT3000P• GXT4000P• GXT4500P• GXT6000P• GXT6500P

Hardware Requirements in an HP-UX Environment

System unit: Any B-Class, C-Class, or J-Class workstationsupported on HP-UX Version 10.20 A.C.E. 4 WorkstationAdditional Core Enhancements for HP-UX 10.20 —(June 1999) or 10.20 A.C.E. 5 (Workstation AdditionalCore Enhancements for HP-UX 10.20 — December 1999),or HP-UX 11.0 A.C.E. (November 1999), provided thatrequirements described below are met.

Note: Because of binary incompatibility between HP-UX10.20 and HP-UX 11.0, support of HP-UX 11.0 is limited toa strict run-time support.


• Visualize-FXE• Visualize-FX2• Visualize-FX4• Visualize-FX5• Visualize-FX6• Visualize-FX10

Hardware Requirements in an SGI-IRIX Environment

System unit: Any O2, Indigo2, Octane, Octane2, Onyx2,or Onyx3000 workstation based on R5000, R10000, orR12000 processors, supported on IRIX 6.5, provided thatthe requirements described below are met.


• Integrated graphic adapters on O2 workstations• Solid Impact, or SI/SE• Super Solid Impact, or SSI/SSE• High Impact• Maximum Impact, or MXI/MXE• VPro V6• VPro V8• VPro V10• VPro V12• InfiniteReality• InfiniteReality 3

Hardware Requirements in a Sun Solaris Environment

System unit: Any Ultra1, Ultra2, Ultra10, Ultra30, Ultra60,Ultra80, Sun Blade 100, or Sun Blade 1000 workstationbased on UltraSPARC processor, supported onSolaris 2.6.0, Solaris 7, or Solaris 8 provided thatrequirements described below are met.


• Creator3D• Creator3D Series III• Elite 3D Model M3/M6 (U10-440 MHz only, for U10

workstations)• Expert 3D Lite• Expert 3D

202-026 -6-

ENOVIA 3d com Products Hardware Requirements —Client Side

Common Requirements: The following requirements arecommon to all operating systems supported by ENOVIA3d com. System unit and graphic requirements areplatform-specific and include:

• Disk drive: 10 MB of disk space is required for datadynamically downloaded from the ENOVIA 3d comProduct server.

• Memory: 128 MB of RAM is the minimumrecommended amount of real memory; 256 MB of RAMis recommended on 3d com clients.

• Display: A graphic color display, compatible with theselected platform-specific graphic adapter. Theminimum recommended size for usability reasons is17 inches. The minimum resolution required forWindows workstations is 800 x 600, and 1280 x 1024on UNIX workstations.

• LAN adapter: A network adapter is required toconnect the server and clients to the LAN or WAN.


• Pointing device: Two-button or three-button mouse.

Platform Specific Requirements

Windows 98/Windows NT 4.0/Windows 2000/Windows XP

Note: With V5.8, ENOVIA 3d com no longer supportsWindows 95.

• System unit: Intel Pentium II-, Pentium III-, orPentium 4-based workstations running MicrosoftWindows 98, Windows NT 4.0 Workstation, Windows2000 Professional Edition, or Windows XP ProfessionalEdition.

• Graphic adapter: A 3D graphic adapter is required.

Note: Memory consumption is about 50 MB once all3d com applets, the Java Virtual Machine, and thebrowser itself have been loaded.

AIX

• System unit: Any RS/6000, based on PowerPC 604(166 MHz minimum clock speed), Power2, or Power3processor families, supported on AIX V4R3.3.

• Graphic adapter: one of the following:

− GXT500P− GXT550P− GXT800P− GXT800M− GXT2000P− GXT3000P− GXT4000P− GXT4500P− GXT6000P− GXT6500P

HP-UX

• System unit: Any B-Class, C-Class, or J-Classworkstation supported on HP-UX V10.20 A.C.E. 4(Workstation Additional Core Enhancements forHP-UX 10.20 — July 1997), 10.20 A.C.E. 5 (WorkstationAdditional Core Enhancements for HP-UX 10.20 —December 1999), or HP-UX 11.0 A.C.E. (Workstation

Additional Core Enhancements for HP-UX 11.0 —November 1999), provided that all the requirementsdescribed below are met.

• Graphic adapter: one of the following:

− Visualize-FXE− Visualize-FX2− Visualize-FX4− Visualize-FX5− Visualize-FX6− Visualize-FX10

SGI IRIX

• System unit: Any O2, Indigo2, Octane, Octane2,Onyx2, or Onyx3000 workstation based on R5000,R10000, or R12000 processors, supported on IRIX 6.5,provided that the requirements described below aremet.

• Graphic adapter. One of the following:

− Integrated graphic adapters on O2 workstations− Solid Impact, or SI/SE− Super Solid Impact, or SSI/SSE− High Impact− Maximum Impact, or MXI/MXE− VPro V6− VPro V8− VPro V10− VPro V12− Infinite Reality− Infinite Reality 3

Sun Solaris

• System unit: Any Ultra1, Ultra2, Ultra10, Ultra30,Ultra60, Ultra80, Sun Blade 100, or Sun Blade 1000workstation based on the UltraSPARC processor,supported on Solaris 2.6.0, Solaris 7, or Solaris 8,provided that the requirements described below aremet.

• Graphic Adapter: One of the following:

− Creator3D− Creator3D Series III− Elite 3D (U10-440 MHz for Ultra 10 workstations)− Expert 3D Lite− Expert 3D

ENOVIA 3d com Product Hardware Requirements —Server Side

Common Requirements: The following requirements arecommon to all operating systems supported by ENOVIA3d com Products. System unit and graphic requirementsare platform-specific and are detailed in the topics thatfollow:

• Disk drive: An internal or external disk drive isrequired to store program executables (installation ofall ENOVIA 3d com Products requires about 700 MB onWindows, 900 MB on AIX, 800 MB on HP-UX or IRIX,700 MB on Solaris), program data, usage environmentand paging space. Requirements may be larger whenlarge amounts of data are used.

• Memory: 256 MB of RAM is the minimumrecommended amount of memory for all applications.Requirements may be greater when large amounts ofdata are used.

• Internal/external drives: A CD-ROM drive is requiredfor program and online documentation installation.

• Display: A graphic color display, compatible with theselected platform-specific graphic adapter. The

-7- 202-026

minimum recommended size is 17 inches. Theminimum resolution required for Windowsworkstations is 800 x 600, and 1280 x 1024 on UNIXworkstations.

• LAN adapter: A network adapter is required toconnect the server and clients to the LAN or WAN.


• Pointing device: Three-button mouse.

General Rules for Memory Requirements

The memory requirement depends on the number ofsimultaneous ENOVIA 3d com sessions; customers haveto dimension the server system accordingly.

The server dimensioning needs to take into account thememory used by the CAD/CAM process on the server.

For CATIA V5

• ENOVIA 3d com consumes 50 MB for the first sessionplus 10 MB for each additional session for an average1 MB model.

• The RAM requirement formula is the following: 50 MB+ n*10 MB+n*m MB, where n is the number ofmaximum concurrent sessions and m the average sizeof the CATIA models. Note that if several models areselected in one session, only one model remainsloaded at the same time, thus optimizing the memoryconsumption. As an example, for 10 concurrent usersmanipulating 10 MB average-size models, theminimum RAM requirement is 256 MB.

• For better response time, a graphics card can beinstalled on the server and shared in a sequentialmode between the simultaneous sessions to improve3D rendering, customers must dimension the graphicscard accordingly.

For CATIA V4

• As a rule of thumb, ENOVIA 3d com Navigator Productconsumes 40 MB for the first session plus 15 MB foreach additional session for an average 1 MB model.

• The RAM requirement formula is the following: 40 MB+ n* 15 MB + n*m MB, where n is the number ofmaximum concurrent sessions and m the average sizeof the CATIA models. Note that if several models areselected in one session, only one model remainsloaded at the same time, thus optimizing the memoryconsumption. As an example, for 10 concurrent usersmanipulating 10 MB average-size models, theminimum RAM requirement is 290 MB.

• For better response time, a graphics card can beinstalled on the server and shared in a sequentialmode between the simultaneous sessions to improve3D rendering, customers must dimension the graphicscard accordingly.

Windows NT

System unit — Any Intel Pentium II-, Pentium III-, orPentium 4-based workstations running Windows NT V4.0

Graphic adapter — The same as for CATIA V5. For the listof supported graphics adapters, refer to:


Note: Windows 2000 and Windows XP are not supportedon ENOVIA 3d com, server side.

On a UNIX (AIX, HP-UX, SGI IRIX, or Sun Solaris) ENOVIA3d com Server

System unit and graphic adapter: refer to ENOVIA 3d comhardware requirements on the client side.

Note: In addition to graphic adapters supported on anAIX ENOVIA 3d com client, Virtual Frame Buffertechnology offered through AIX operating system is alsosupported on an AIX ENOVIA 3d com server.

Software Requirements

ENOVIA DMU Software Requirements

Common Software Requirements: Refer to the ProgramDirectory or contact your IBM Support Center forappropriate corrective service to apply to the followingsoftware.

Software Requirements in a Windows 98 Environment

Notes

• The Windows 98 environment applies only toENOVIA — DMU P1 Products.

• With V5.8, ENOVIA DMU products no longer supportWindows 95.

Windows 98, with the following components:

• A Microsoft implementation of OpenGL libraries asdelivered with Windows 98. These libraries may beupdated depending on selected graphic adapters,when installing the graphic adapter and associateddrivers. Dassault Systemes will providerecommendations related to driver levels based ontested graphic adapters through the CATIA V5 Website:


• A localized version of the operating system may berequired when selected installation locale differs fromLatin1.

Software Requirements in Windows NT, Windows 2000,or Windows XP Environment

• Windows NT Workstation V4.0 with Service Pack 4,Service Pack 5, or Service Pack 6a, Windows 2000Professional, or Windows XP Professional with thefollowing components:

− Windows NT 4.0, Windows 2000 and Windows XPdelivers an implementation of OpenGL libraries.These libraries may be updated depending onselected graphic adapter, when installing thegraphic adapter and associated drivers. DassaultSystemes will provide recommendations related todriver levels based on certified configurationsthrough:


− A localized version of the operating system may berequired when selected installation locale differsfrom Latin1.

Note: For remote access from networked clients,Terminal Server is supported with MicrosoftWindows NT 4.0, Terminal Server Edition, at ServicePack 4 level on the Windows NT server. Accessthrough a standard browser requires Citrix MetaFrame1.0 to be installed in addition on the server. TerminalServer is also available with Windows 2000 Server and

202-026 -8-

Windows 2000 Advanced Server, or Windows XPProfessional.

Software Requirements in AIX

• AIX V4R3.3, including:

− CSet++ for AIX Application Runtime: at minimumlevel 4.0.2 (5765-D82)

Note: C Set++ Application Runtime is shippedwith the AIX Operating System.

− IBM XL Fortran Runtime Environment for AIX(5765-C11 or 5801-AAR-7070, part number04L2123), at minimum level 5.1.0 or 7.1.0 (5765-E03)

− OpenGL and GL3.2 Runtime Environment (deliveredwith AIX 4.3 operating systems)

− Common Desktop Environment (CDE) (deliveredwith the operating system)

Software Requirements in HP-UX: HP-UX V10.20 A.C.E. 4(Workstation Additional Core Enhancements for HP-UX10.20 — June 1999) or 10.20 A.C.E. 5 (WorkstationAdditional Core Enhancements for HP-UX 10.20 —December 1999) or HP-UX 11.0 A.C.E. (November 1999),including:

• ANSI C++ Runtime Environment (C++, at minimumlevel 1.21 is delivered with the operating system)

• HP FORTRAN Runtime Environment (delivered with theoperating system)

• HP-UX 700 OpenGL 3D API Runtime Environment

• CDE (delivered with the operating system)

• Localized version of the operating system requiredwhen selected installation locale differs from ISO codepages

Note: Because of binary incompatibility′s betweenHP-UX 10.20 and HP-UX 11.0, support of HP-UX 11.0 islimited to a strict run-time support.

Software Requirements in SGI IRIX

The minimum indicated levels of IRIX 6.5.3m, including:

• C, C++, and Fortran77 standard executionenvironment (delivered with the operating system)

• OpenGL (delivered with IRIX execution environment)

• IRIX Interactive Desktop (delivered with the operatingsystem)

• WorldView is required when selected installation localediffers from ISO-1

Software Requirements in Sun Solaris

The minimum indicated levels of Sun Solaris 2.6.0,Solaris 7, or Solaris 8 including:

• C and C++ runtime environment (delivered with theoperating system).

• OpenGL runtime environment (delivered with theoperating system).

• Fortran runtime environment is delivered with ENOVIA— DMU Navigator.

• CDE (delivered with the operating system).

• A localized version may be required when the selectedinstallation locale differs from ISO-1.

Access to Online Documentation

Online documentation and User GALAXY (online productmarketing information) are delivered in HTML format. AnHTML browser is required to access this documentation:

• In a UNIX environment (AIX, HP-UX, IRIX, Solaris):Netscape Navigator at minimum level 4.75.

• In a Windows environment: either Microsoft InternetExplorer 5.0 or Netscape Navigator at minimum level4.75.

• Portable Document Format (PDF) documentation isdelivered in addition to HTML documentation. Printing,and eventually browsing of this documentationrequires the availability of Adobe Acrobat Reader atminimum level 3.0. Adobe Acrobat Reader V3.0 maybe downloaded from:

http://www.adobe.com/

• Although access to the online documentation mightwork on other HTML browsers, incidents specific tobrowsers other than products mentioned above arenot eligible for support.

Prerequisites for the Licensing Environment

• Windows workstations must have a LAN Card (Ethernetor token ring) and TCP/IP installed and properlyconfigured, but there is no need to have theworkstations connected to the network.

• No additional software is required when accessingnodelock licenses. Beginning with ENOVIA — DMUProducts V5R5, nodelock licensing is available onWindows 98.

• IBM License Use Management (LUM) is required toserve concurrent licenses across a network. A LUMconfiguration file (i4ls.ini) is required on ENOVIA —DMU clients to access concurrent licenses from theseservers.

• IBM LUM at a minimum level 4.5.5 is required on UNIXor Windows NT license servers.

• IBM LUM at a minimum level 4.5.8 is required onWindows 2000 Professional license servers.

• IBM LUM at a minimum level 4.6.0 is required whenHigh Availability Licensing (HAL) licensing mechanismoffered by LUM is used.

• IBM LUM at a minimum level 4.6.2 is required onWindows 2000 Server and Advanced Server licenseservers.

• IBM LUM at a minimum level of 4.6.4 is required onWindows XP license servers.

• Windows 98 is not supported on LUM license servers.Such clients require either Nodelock licensing or aUNIX, Windows NT, Windows 2000, or Windows XP LUMlicense server.

IBM LUM V4.6.0 is shipping with ENOVIA Portal V5.8.Other versions of LUM may be obtained at no chargefrom:

http://www.software.ibm.com/is/lum/download.html

Macro Replay Capabilities: ENOVIA — DMU Productshave built-in macro record and replay capabilities.

For UNIX, the interpreter is Visual Basic Script 3.0 fromMainsoft; it is included in ENOVIA — DMU Products asshared libraries.

-9- 202-026

For Windows, the interpreter is either:

• Visual Basic Script (VB Script), at minimum level 5.0;it is delivered with Microsoft Internet Explorer. VBScript libraries at level 5.0.0.3715 are delivered withInternet Explorer 5.0, or at higher levels with laterversions of Internet Explorer. Use of VB Script isrecommended for developing Windows/UNIXcompatible macros.

• Microsoft Visual Basic for Applications (VBA) atminimum level 6.0. VBA is delivered and installed bydefault with ENOVIA — DMU.

Printer and Plotter Support in a UNIX Environment:ENOVIA — DMU Products provide support for mainplotter/printer languages:

• CalComp C907

• CGM-ISO, ATA, CALS

• Hewlett Packard HP-GL/2-RTL and HP-GL or IBM-GLsubsets

• OCE Graphics GPR50: VDF Plotting routines

• Versatec

− VCGL: Versatec Graphics Software− VGS 2.0 VRF: Versatec Graphics Software, VGS 2.0

• Postscript

Printer and Plotter Support in a Windows Environment:Support of printers and plotters on Windows is performedthrough the availability, for the targeted printers/plotters,of the corresponding vendors′ drivers, compatible withthe targeted version of the operating system. Contact theappropriate printer/plotter vendor for support.

Batch Monitoring using MQSeries : Using MQSeriescommunication tools, some batch operations can now belaunched remotely. When implemented at the batch level,this optional feature requires:

• MQSeries at minimum level 5.1. Information aboutavailability at:

http://www.ibm.com/software/ts/mqseries/messaging/

• MQSeries client is required on systems where thetransaction is initiated; MQSeries server is requiredon systems where remote batches are executed.

Software installation:

• On Windows, installation and de-installation rely onWindows-compliant tools, such as InstallShield,enabling anyone familiar with Windows proceduresand concepts to install the software by themselves.

• The concepts, procedures, and look and feel ofinstallation procedures for Windows have been carriedover to the UNIX environment in order to give acommon ENOVIA — DMU Products installationinterface for all supported operating systems.

• Key aspects of the installation procedures are:

− Easy and fast installation: enable any user to installand execute the product with a limited number ofinteractions

− Reduced user environment: when installed,minimum customization is necessary to give accessto the product to any user

− Customizable installation: installation proceduresinclude the possibility to select downloadedproducts

ENOVIA 3d com Products Software Requirements —Client Side

Common Client Software Requirements: Java-EnabledWeb Browser on the Client Machines

• On Windows, Microsoft Internet Explorer 5.0 withMicrosoft Virtual Machine for Java (Microsoft VM), atlevel 3167, or later, installed.

• For ENOVIAVPM interoperability, it is recommended touse Microsoft Internet Explorer 5.0 with Microsoft VM3240, or later.

• On UNIX or Windows, Netscape Navigator 4.75, or laterwith JDK1.1 support.

• Incidents specific to other browsers will not be eligiblefor support.

Note: With Windows XP, Microsoft VM may or may not beinstalled depending on the contents of the preload of theoperating system performed by OEM vendors. In case itis not, Internet Explorer will automatically ask if you wishto install it from the Web if it is required (upon the firstvisit to a Web site with a Java applet). Microsoft VM isalso available for download from:

http://www.microsoft.com/downloads/

Starting with Release 8, in addition to a Java EnabledWeb browser, the Java Runtime Environment, at level1.1.8 is required on the client side.

• It is delivered with the Operating System on AIX andSolaris, and can be downloaded from IBM or Sun Websites:

http://www.ibm.com/java/jdk/download/http://www.sun.com/software/solaris/java/

• It can be downloaded from HP and SGI Web sites forHP-UX and IRIX:

http://www.hp.com/go/java/http://www.sgi.com/developers/devtools/languages/java.html

• For Windows environments, Java Runtime can bedownloaded from the IBM Web site:

http://www.ibm.com/java/jdk/download/

• On-the-fly conversion to VRML: does not require anyadditional software.

• If no plug-in is available to display the converted datathe browser will propose to store the data with theextension .wrl on the client.

• If a VRML plug-in is available it will be automaticallyinvoked for viewing and manipulation.

• For interoperability between a CATIA V5 session anda VPM database, using a 3d com DB2 client or Oracleclient, refer to the appropriate VPM announcement forspecific supported RDBMS release levels.

Software Requirements on UNIX Clients: Operatingsystem requirements stated in the SoftwareRequirements section apply equally for ENOVIA 3d comProduct clients on UNIX machines.

202-026 -10-

Windows 98

Note: With V5.8, ENOVIA 3d com no longer supportsWindows 95.

Microsoft Windows 98, with the following components:

• A Microsoft implementation of OpenGL libraries isdelivered with Windows 98; these libraries may beupdated depending on the selected graphic adapterswhen installing the graphic adapter and associateddrivers.

• A localized version of the operating system may berequired when the selected installation locale differsfrom Latin1.

Windows NT 4.0/Windows 2000/Windows XP: Windows NTWorkstation V4.0 (with Service Pack 4, Service Pack 5, orService Pack 6a) or Windows 2000 Professional Edition orWindows XP Professional Edition, with the followingcomponents:

• Windows NT 4.0 and Windows 2000 or Windows XPdelivers an implementation of OpenGL libraries.These libraries may be updated depending on theselected graphic adapter when installing the graphicadapter and associated drivers.


ENOVIA 3d com Product Software Requirements —Server Side

Information in this section describes requirementsspecific to each supported operating system on ENOVIA3d com servers.

Windows NT 4.0 (with Service Pack 4, Service Pack 5 orService Pack 6a)

• Windows NT 4.0 delivers an implementation of OpenGLlibraries. These libraries may be updated dependingon the selected graphic adapter when installing thegraphic adapter and associated drivers.


Note: Windows 2000 and Windows XP are not supportedon ENOVIA 3d com, server side.

AIX

• Operating systems — AIX V4R3.3, including:

− CSet++ for AIX Application Runtime: at minimumlevel 4.0.2 (5765-D52), (C Set++ ApplicationRuntime is shipped with the AIX operating system)

− IBM XL Fortran Runtime Environment for AIX(5765-C11), at minimum level 5.1.0 or 7.1.0(5765-E03)

− OpenGL and GL3.2 Runtime Environment (deliveredwith AIX 4.3 operating systems)

− CDE (delivered with the operating system)

HP-UX

• Operating systems — HP-UX V10.20 A.C.E. 4(Workstation Additional Core Enhancements for HP-UX10.20 — July 1999), HP-UX V10.20 A.C.E. 5 (WorkstationAdditional Core Enhancements for HP-UX 10.20 —

December 1999) or HP-UX V11.0 A.C.E.(November 1999) including:

− ANSI C++ Runtime Environment (a C++,delivered with the operating system at minimumlevel 1.21)

− HP FORTRAN Runtime Environment (delivered withthe operating system)

− HP-UX 700 OpenGL 3D API Runtime Environment

− CDE (delivered with the operating system)

− A localized version of the operating system may berequired when the selected installation localediffers from ISO code pages

SGI IRIX

• Operating systems — IRIX 6.5.3m, including:

− C, C + + , and Fortran77 standard executionenvironment (delivered with the operating system)

− OpenGL (delivered with the IRIX executionenvironment)

− IRIX Interactive Desktop (delivered with theoperating system)

− WorldView is required when the selectedinstallation locale differs from ISO-1

Sun Solaris

• Operating systems — Sun Solaris 2.6.0, Solaris 7, orSolaris 8, including:

− C and C++ runtime environment (delivered withthe operating system)

− OpenGL runtime environment (delivered with theoperating system)

− Fortran runtime environment (delivered with theoperating system)

− A localized version of the operating system may berequired when the selected installation localediffers from ISO-1

Additional Software Requirements — Server Side: Thefollowing components are required or optional on ENOVIA3d com servers for all supported operating systems:

HTTP Server

• ENOVIA 3d com requires an HTTP server (notdelivered with the ENOVIA 3d com products) on theserver machine. You will need to configure it after theENOVIA 3d com installation.

• ENOVIA 3d com supports the following HTTP servers:

− Lotus Domino Go 4.6.1

− Apache 1.3

− Netscape Enterprise Server 3.6, or later

− IBM HTTP Server 1.3.6, or later

Note: ENOVIA 3d com may also run on other HTTPservers, but only the above have been certified.

ORBIX

• Additionally, the ORBIX 3.0.1 product (supplied withENOVIA 3d com Navigator) is used and enablesIIOP-based, CORBA-compliant communications on theserver side.

-11- 202-026

Java Virtual Machine

• Java Runtime Environment, at level 1.1.8 is required,on the server side. For the Workbook server(management of Workbooks can alternatively beperformed through a WebSphere Application Server.Refer to the following note.):

− It is delivered with the operating system on AIX andSolaris and can also be downloaded from IBM orSun Web sites:

http://www.ibm.com/java/jdk/download/http://www.sun.com/software/solaris/java/

− It can also be downloaded from the HP and SGI Websites for HP-UX and IRIX at:

http://www.hp.com/go/java/http://www.sgi.com/developers/devtools/languages/java.html

− For Windows environments, Java Runtime can bedownloaded from the IBM Web site:

http://www.ibm.com/java/jdk/download/

WebSphere Application Server

• Management of Settings, Workbooks, and Single SignOn can optionally be hosted in a Web applicationserver, running on AIX, HP-UX, Sun Solaris,Windows NT, Windows 2000 or Windows XP. ENOVIA3d com Server and this Web application server mayrun on different machines and are installed separately.This Web application server requires:

− WebSphere Application Server, Advanced Edition,V4.0.1. For more information on availability ofWebSphere on supported platforms visit:

http://www.ibm.com/software/webservers/appserv/version40.html

− An HTTP server supported by WebSphereApplication Server 4.0.1.

− Connection to a database, supported by WebSphereApplication Server 4.0.1.

− If the ENOVIA 3d com Web application servermanages Single Sign On, an LDAP directory serversupported by WebSphere Application Server 4.0.1is required.

Prerequisite for the Licensing Environment

• “Nodelock” licensing is not allowed with ENOVIA 3dcom V5. IBM LUM, is required to serve concurrentlicenses across a network. A LUM configuration file(i4ls.ini) is required on clients to access concurrentlicenses from these servers.

− IBM LUM, at minimum level 4.5.5 is required onUNIX or Windows NT license servers.

− IBM LUM, at minimum level 4.5.8 is required onWindows 2000 Professional license servers.

− IBM LUM, at minimum level 4.6.0 is required whenHAL licensing mechanism offered is used.

− IBM LUM, at minimum level 4.6.2 is required onWindows 2000 Server and Advanced Server licenseservers.

− IBM LUM, at minimum level 4.6.4 is required onWindows XP license servers.

− Windows 98 is not supported on IBM LUM licenseservers.

− IBM LUM may be obtained at no charge from:

http://www.software.ibm.com/is/lum/download.html/

Note: LUM 4.6.2 is the minimum level needed to installcorrectly onto Windows 2000 Server. For Windows 2000Professional, LUM 4.6.0 will install correctly.

Optional Server Requirements — Server Side ForCATIA V5

• CATIA V5 server code is provided on the 3d comCD-ROM and installed by default. In order to use 3dcom in conjunction with CATIA V5 you must install 3dcom with the N3G (3d com Navigator) configuration.

• Note. The ENOVIA 3d com Navigator configurationincludes a V5 server supporting reading andvisualizing CATIA 3D data created at any level up toand including CATIA V5R8 and CATIA V4R2.4.1.

For CATIA V4

• For ENOVIA 3d com installations that will use CATIAV4, CATIA V4R2.4.1 is required. It must be compatiblewith the CATIA V4R2.4.1 prerequisites. Refer to theCATIA V4 Installation Guide for the complete list ofsystem prerequisites or refer to:

http://www.ibm.com/solutions/plm/

• With V5.8, most of the functionalities supported on theV4 server are now available on the V5 server. The V4server is still needed for customers using CDM toaccess CATIA models stored in CDM. In addition, theV4 server is needed for ENOVIA 3d com customerswho want to use the sag and comments functionalitiesof the 3D local viewer, and for using sag, comments,generation of VRML, and the use of hyperlinks, (anyURL defined on CATIA V4 documents), functionalitiesof the 3D remote viewer.

• CATIA V4R2.4.1 is installed with the following:

− CATIA.Object Manager (COMS410) required

− CATIA.Data Management — Access Product(CDAS410) optional

− CATIA.Data management — Run Time Product(CDRS410) optional

Note: CATIA V4 and CATIA V5 servers can be runtogether.

ENOVIA V5R8 MultiCAx Plug-ins must be installed on theserver side when MultiCAD support is required.(ProEngineer, Unigraphics, and IDEAS).

ENOVIAvpm (for installation using ENOVIA — MultiPDMCDM/VPM Plug-in) requires ENOVIAvpm 1.4 PTF 10 orENOVIAvpm 1.5 PTF 5.

Planning Information

Customer Responsibilities

ENOVIA 3d com Products AND MultiPDM Plug-in ProductsLicensing: To provide customers with additionalflexibility, all ENOVIA Portal Solutions are concurrent-userlicensed in a manner similar to license use in CATIA V5.The License Keys of Portal 3d com configurations andshareable products are installed on the server and canbe accessed by thin clients (no code is installed onclients). A license for one user gives one connection line.Any offline user is required to have a 3d com licenseaccess with which code can be downloaded. Code shouldnot be duplicated from a previous download.

202-026 -12-

When accessing other systems via ENOVIA 3d comProducts it is usually necessary to have a license orrequired authorization on that system. For example, towork with data in ENOVIAVPM, ENOVIAPM, or Optegra, alicense for the corresponding user role within thosesystems is needed. The ENOVIA 3D com Navigator andCAD Viewing configurations can have an optionalcorequisite loaded on the server for CAD access. ForCATIA V5, the required CAD server is included andinstalled by default. When used in conjunction with CATIAV4 it is necessary to install CATIA COM licenses on theserver. One License of CATIA V4 COM authorizes 10simultaneous connections. The ENOVIA 3d com SpaceAnalysis product has an optional corequisite of thecorresponding CATIA Space Product (5691-SPA) forCATIA V4 (with the same 1/10 ratio of users per license).If data such as CAD models are to be loaded into theauthoring system such as CATIA V5, the correspondingproduct configuration and license must be available.

The ENOVIA 3d com Web Search (part of 3d comNavigator product) function can be installed on otherCPUs besides the Portal Server to which an authorizeduser connects. The user task will use the Search functionto go through its ENOVIA 3d com Web Browser for thecorrect connection. Because of this capability the Searchfunction is restricted to users defined on the 3d comserver. This restriction applies even if the Searchcomponent is physically installed on a CPU other than 3dcom Navigator server.

ENOVIA DMU Products Licensing Principles: ENOVIADMU Navigator Configuration licenses continue asalready announced and in use within the ENOVIAPortfolio. Working under the CATIA V5 concurrent-userlicensing scheme, ENOVIA DMU products use the samemethods. This provides a consistent user seatdesignation across both CATIA V5 and ENOVIA PortalSolutions V5. ENOVIA DMU Products such as KinematicSimulation or DMU Optimizer, licensed as shareable inCATIA V5 will now also work and can be shared within theENOVIA DMU environment.

PORTAL MultiCAx Plug-In Licensing Principles: AllMultiCAx Plug-ins are licensed as concurrent-usershareable products available to ENOVIA 3d com, CADViewing, and Portal DMU users (they do not work inconjunction with Effects Management Configuration).When your profile takes a MultiCAx license, this entitlesyou to use the MultiCAx capabilities on the sameworkstation within any simultaneous sessions you areauthorized for (ENOVIA 3d com Products, CAD Viewing,or ENOVIA DMU Products). New in V5.8, all MultiCAxPlug-ins are also available and work within a CATIA V5environment.

Direct Customer Support: AIX, PS

Direct customer support is provided under the PLMEnhanced Support Offering (ESO). This fee serviceenhances the customer′s productivity by providing voiceand electronic access to the PLM Support Center. TheESO help desk will answer questions pertaining to theinstallation, administration, use, and handling ofsuspected software defects for eligible products.

Additional information about the ESO and other availablePLM services offerings is available by going to the PLMWeb page at:


On the left side select “Support” then click on “Serviceand Support offerings” and then on the next frame expand

“Support Offerings” and select “CATIA/ENOVIA EnhancedSupport Offering”.

Packaging

• Seven Code CDs for 3d com, LCD4-4242-05 containing:

− AIX− HP-UX− IRIX− Sun Solaris− Microsoft Windows NT, Windows 2000, and

Windows XP− 3d com Effect Library− Program Directory for 3d com and DMU

• Six Code CDs for DMU, LCD4-4676-04 containing:

− AIX− HP-UX− IRIX− Sun Solaris− Microsoft Windows NT, Windows 2000, and

Windows XP− Microsoft Windows 98

• Softcopy Collection Kit

− SK3T-5188-05 English− SK3T-0572-04 French− SK3T-0573-04 German− SK3T-0574-04 Japanese− SK3T-0611-02 Simplified Chinese (3d com only)

• Containing:

− ptlad — 3d com Administration Guide− ptlug — 3d com User Guide− basug — DMU Infrastructure User Guide− basil — DMU Infrastructure Installation Guide− dmnug — DMU Navigator User Guide− kinug — DMU Kinematics Simulator User Guide− spaug — DMU Space Analysis User Guide− fitug — DMU Fitting Simulator− pr1ug — DMU Plant and Ship Review− dt1ug — DMU Dimensioning and Tolerancing− dmoug — DMU Optimizer− du3ug — DMU Immersive Review− anrug — DMU Engineering Analysis Review− phsug — Photo Studio− dilug — MultiCAx I Plug-In− dplug — MultiCAx P Plug-In− dulug — MultiCAx U Plug-In− ddlug — DELMIA D5 Integration− dslug — MultiCAx SolidWorks Plug-In− delug — MultiCAx SE Plug-In− dalug — MultiCAx AD Plug-In− lclug — Multi-PDM LCA Plug in− pmlug — Multi-PDM PM Plug in− oglug — Multi-PDM OP Plug in− vplug — Multi-PDM CDM VPM Plug in− hbrug — Human Builder− hmeug — Human Measurements Editor− hpaug — Human Posture Analysis− haaug — Human Activity Analysis

• Two Portal Solutions API CDs, LCD4-5343-02containing:

− API for UNIX− API for Windows

• One LUM Run time V4.6.0 CD, LCD4-4195-02

• Informal Documents

− The Licensed Program Specification (GI11-1225)

− The Memo to Current Users (GI11-1356)

-13- 202-026

− The Registration Memo (GI11-1224)

− Licensing IBM PLM Solutions Software(GI11-3619-00)

Security, Auditability, and Control

The announced programs use the security and auditabilityfeatures of the host hardware or operating systemsoftware. The customer is responsible for evaluation,selection, and implementation of security features,administrative procedures, and appropriate controls inapplication systems and communication facilities.

Customer Financing: IBM Global Financing offersattractive financing to credit-qualified commercial andgovernment customers and Business Partners in morethan 40 countries. IBM Global Financing is provided bythe IBM Credit Corporation in the United States.Offerings, rates, terms, and availability may vary bycountry. Contact your local IBM Global Financingorganization. Country organizations are listed on theWeb at:

http://www.financing.ibm.com

Ordering Information

Previously Announced Terms and Conditions

The terms and conditions previously announced forENOVIA Portal Solutions Products are unaffected by thisannouncement.

Current Licensees

Current licensees of ENOVIA Portal Solutions V5 willreceive this update from IBM Software Delivery andFulfillment (SDF) automatically.

Shipment of this release is scheduled to be completedavailability plus two weeks.

New Licensees

Orders for new licenses can be placed now.

Unless a later date is specified, orders entered before theplanned availability date will be assigned a schedule dateof one week following availability.

Shipment will begin on the planned availability date.

Basic License

New V5 Ordering Instructions for Custom Configurations:A new process for creating custom configurations is ineffect. The prior process used billable feature numbersgenerated under each of the configurations to representthe add-on products (AOPs). In V5.8, the ordering processis being changed. A 5693 Product ID (PID) has beencreated for each AOP. The 5693 AOP is related to the5691 configuration by a no-charge “indicator” code. Aunique Indicator Code for each AOP has been set upunder each of the 5691 configurations for which it′savailable. In the configurator, you will select the AOPsthat you need to create your custom configuration. Theconfigurator will automatically bring up the associatedAOP Indicator Codes and the 5693 AOPs to be ordered forbilling purposes. The indicator feature number and the5693 AOP must be ordered in the same quantity as theconfiguration. 5693 PIDs cannot be ordered outside of a

custom configuration. Through the use of the IndicatorCodes, the custom configuration definition will beavailable in the customer record under the 5691configuration and will continue to be licensed as oneentity. Licensing of custom configurations is unchangedwith the new ordering process.

Effective with V5.8, all new custom configurations shoulduse the new ordering process (refer to Example 1,Ordering a Custom Configuration Using the New OrderingProcess).

Note: This is still a complicated ordering process and itis imperative that you use the configurator to prepareyour order.

Migration/Upgrade Paths

Migration/upgrade paths for AOPs that were announcedbefore V5.8 are now available for ordering under the 5693AOP PIDs.

Conversion of Customer Records

Migration paths are being provided for convertingcustomer records for custom configurations orderedthrough V5.7 to the new AOP model. Migrationconversion feature numbers are available from theexisting AOP feature number to the new 5693 AOP PIDs.

Existing customer records for custom configurations mustbe converted to the new AOP model before making anychanges to the install record. All customer recordsshould be converted to the new AOP model by February12, 2003. When all custom configurations are convertedto the new AOP model, the AOP feature numbersannounced through V5.7 will be withdrawn.

To Order a Basic License for a Standard Configuration orShareable Product, specify:

• The configuration/shareable product program number• The appropriate charge option

Note: The configurator will automatically add to yourorder:

• The appropriate billing feature numbers• Feature number 9001 for asset registration• The appropriate SPO information

To Order a Basic License for a Custom Configuration,Specify:

• The standard configuration program feature number• The appropriate charge option• The indicator codes for the AOPs

Note: The configurator will automatically add to yourorder:

• The 5693 AOP PIDs• The appropriate billing feature numbers• Feature number 9001 for asset registration• The appropriate SPO information

Billing feature numbers for the new V5 model and all newV5R8 configurations and shareable and AOPs arecontained in this section.

202-026 -14-

New Programs V5.8

New ENOVIA 3d com ProductProgram

Product Name Number

ENOVIA-MultiPDM — SmarTeam Plug-in 5691-SMLProduct

New ENOVIA — DMU Add-on-Product

ENOVIA — DMU Digital Plant & Ship 5693-PR1Review 1

ENOVIA — DMU Dimensioning & 5693-DT1Tolerancing Review 1

Billing Feature Numbers for New ENOVIA 3d com V5.8Products

Note: For order quantities exceeding 250, contact yourIBM representative.

5691-SML ENOVIA — MultiPDM — SmarTeam Plug-in

0011 SML Primary Lic Chg (PLC)0006 SML ALC0001 SML YLC

Billing Feature Numbers for New ENOVIA DMU V5.8Products

Notes

• Tier 1 Usage Level 1-9.

• Tier 2 Usage Level 10-25.

• Tier 3 Usage Level 26+.

• The above tier usage levels apply to all of the productslisted.

• For order quantities exceeding 250, contact your salesrepresentative.

5693-PR1 ENOVIA — DMU Digital Plant & Ship Review 1AOP

0011 PR1 PLC0006 PR1 AOP ALC User 1-90007 PR1 AOP ALC User 10-250008 PR1 AOP ALC User 26+0001 PR1 AOP YLC User 1-90002 PR1 AOP YLC User 10-250003 PR1 AOP YLC User 26+

5693-DT1 ENOVIA — DMU Dimensioning & TolerancingReview 1 AOP

0011 DT1 PLC0006 DT1 AOP ALC User 1-90007 DT1 AOP ALC User 10-250008 DT1 AOP ALC User 26+0001 DT1 AOP YLC User 1-90002 DT1 AOP YLC User 10-250003 DT1 AOP YLC User 26+

No Charge Conversion Feature Numbers for New ENOVIAV5.8 AOPs required to convert from previous announcedAdd-on features:

5693-PR1 UPG From PR1 AOP

4731 5693PRI UPG PR1 AOP 5691-DH24732 5693PRI UPG PR1 AOP 5691-DM14702 5693PRI UPG PR1 AOP 5691-DM24734 5693PRI UPG PR1 AOP 5691-DM34735 5693PRI UPG PR1 AOP 5691-DPS

5693-DT1 UPG From DT1 AOP

4731 5693DT1 UPG DT1 AOP 5691-DH24732 5693DT1 UPG DT1 AOP 5691-DM14702 5693DT1 UPG DT1 AOP 5691-DM24734 5693DT1 UPG DT1 AOP 5691-DM34735 5693DT1 UPG DT1 AOP 5691-DPS4736 5693DT1 UPG DT1 AOP 5691-PS1

5693-FIT UPG From FIT AOP

4702 5693FIT UPG FIT AOP 5691-DM24734 5693FIT UPG FIT AOP 5691-DM34731 5693FIT UPG FIT AOP 5691-DH2

5693-KIN UPG FROM KIN AOP

4702 5693KIN UPG KIN AOP 5691-DM24731 5693KIN UPG KIN AOP 5691-DH24734 5693KIN UPG KIN AOP 5691-DM3

5693-DMO UPG FROM DMO AOP

4702 5693DMO UPG DMO AOP 5691-DM24731 5693DMO UPG DMO AOP 5691-DH24734 5693DMO UPG DMO AOP 5691-DM34735 5693DMO UPG DMO AOP 5691-DPS

5693-SP1 UPG FROM SP1 AOP

4732 5693SP1 UPG AOP 5691-DM14736 5693SP1 UPG SP1 AOP 5691-PS1

5693-HAA UPG FROM HAA AOP

4702 5693HAA UPG HAA AOP 5691-DM24734 5693HAA UPG HAA AOP 5691-DM34735 5693HAA UPG HAA AOP 5691-DPS

5693-HBR UPG FROM HBR AOP

4702 5693HBR UPG HBR AOP 5691-DM24734 5693HBR UPG HBR AOP 5691-DM34735 5693HBR UPG HBR AOP 5691-DPS

5693-HME UPG FROM HME AOP

4702 5693HME UPG HME AOP 5691-DM24734 5693HME UPG HME AOP 5691-DM34735 5693HME UPG HME AOP 5691-DPS

5693-HPA UPG FROM HPA AOP

4702 5693HPA UPG HPA AOP 5691-DM24734 5693HPA UPG HPA AOP 5691-DM34735 5693HPA UPG HPA AOP 5691-DPS

5693-PHS UPG FROM PHS AOP

4702 5693PHS UPG PHS AOP 5691-DM24731 5693PHS UPG PHS AOP 5691-DH24734 5693PHS UPG PHS AOP 5691-DM34735 5693PHS UPG PHS AOP 5691-DPS

5693-ANR UPG FROM ANR AOP

4702 5693ANR UPG ANR AOP 5691-DM2

Non-Billable Indicator Feature Numbers: Below is a listof unique Indicator Codes for each AOP including thoseadded in V5.8. These no-charge codes are set up undereach of the 5691 configurations for which the AOP isavailable. These codes are for use worldwide.

5691-DM1

4216 5693-SP1 AOP Indicator Code4305 5693-PR1 AOP Indicator Code4306 5693-DT1 AOP Indicator Code

-15- 202-026

5691-PS1

4216 5693-SP1 AOP Indicator Code4306 5693-DT1 AOP Indicator Code

5691-DM2

4210 5693 ANR AOP Indicator Code4211 5693 FIT AOP Indicator Code4212 5693 KIN AOP Indicator Code4215 5693 DMO AOP Indicator Code4241 5693 HAA AOP Indicator Code4242 5693 HBR AOP Indicator Code4243 5693 HME AOP Indicator Code4244 5693 HPA AOP Indicator Code4257 5693 PHS AOP Indicator Code4294 5693 RTR AOP Indicator Code4305 5693 PR1 AOP Indicator Code4306 5693 DT1 AOP Indicator Code

5691-DPS

4210 5693-ANR AOP Indicator Code4215 5693-DMO AOP Indicator Code4241 5693-HAA AOP Indicator Code4242 5693-HBR AOP Indicator Code4243 5693-HME AOP Indicator Code4244 5693-HPA AOP Indicator Code4257 5693-PHS AOP Indicator Code4294 5693-RTR AOP Indicator Code4305 5693-PR1 AOP Indicator Code4306 5693-DT1 AOP Indicator Code

5691-DH2

4210 5693-ANR AOP Indicator Code4211 5693-FIT AOP Indicator Code4212 5693-KIN AOP Indicator Code4215 5693-DMO AOP Indicator Code4257 5693-PHS AOP Indicator Code4294 5693-RTR AOP Indicator Code4305 5693-PR1 AOP Indicator Code4306 5693-DT1 AOP Indicator Code

5691-DM3

4210 5693-ANR AOP Indicator Code4211 5693-FIT AOP Indicator Code4212 5693-KIN AOP Indicator Code4215 5693-DMO AOP Indicator Code4241 5693-HAA AOP Indicator Code4242 5693-HBR AOP Indicator Code4243 5693-HME AOP Indicator Code4244 5693-HPA AOP Indicator Code4257 5693-PHS AOP Indicator Code4294 5693-RTR AOP Indicator Code4305 5693-PR1 AOP Indicator Code4306 5693-DT1 AOP Indicator Code

Configuring Orders: For orders of ENOVIA Portal forMicrosoft Windows, AIX, HP-UX, SGI IRIX, or Sun Solarisplatforms, configure ENOVIA Portal using the PCRS6000configurator. Specify the feature numbers below with aquantity equal to the number of users:

Software FeaturePlatform Number

AIX 5350Hewlett Packard HP-UX 5351SGI IRIX 5352Microsoft Windows 5353Sun Solaris 5354

Ordering Examples

It is a licensing requirement that each unique customconfiguration of ENOVIA Portal Solutions is assigned aunique SW serial number. All ENOVIA DMU and ENOVIA3d com products are built on custom configurations. Toprovide a unique serial for each custom configuration, aninstall record has to be created for each unique customconfiguration. The number is assigned automatically bythe IBM ordering systems each time the output from theconfigurator system is loaded into the IBM orderingsystem. The SW serial number becomes part of thepermanent Customer Record Number.

Additional ENOVIA Portal Solutions products can beadded to an already established SW serial numberthrough an MES order. Use of the MES procedure withthe IBM configurators requires that the orderingrepresentative first load the configurator with thecomplete list of unique SW serial numbers for the uniquecustomer number ordering the MES.

Example 1: A user wishes to order ENOVIA — DMUReview 2 Configuration (5691-DM2), and AOP, ENOVIADMU Engineering Analysis Review 2 (ANR), with 10 userson the AIX platform.

Required configuration information:

• IBM customer number — 12345-67• Attaching System Serial Number — 12345• ENOVIA Configuration, ENOVIA — DMU Review 2

(5691-DM2)• Platform Type — AIX feature number 5350• Quantity required per platform — 10 AIX feature 5350• AOP — DMU Engineering Analysis Review 2 (ANR)

The following codes may also apply:

• NLS Docs feature numbers• Specialized handling feature numbers• Type of License Option• Additional softcopy publication

The configurator will automatically add the necessaryasset registration feature number (9001), the correctlicense tier codes for the quantity ordered and the correctSPOs numbers.

Example 2: A customer wishes to add to his existingENOVIA Portal Solutions license the new product, DMUEngineering Analysis 2 product (5691-ANR), for 10 userson the SGI platform.

Note: Information for this product is found in the CATIAV5.8 Software Announcement 202-027, datedFebruary 12, 2002.

Required configuration information:

• IBM Customer Number — 12345-67• Attaching System Serial Number — 12345• DMU Shareable Product — DMU Engineering Analysis

Review 2 product (5691-ANR)• Platform Type — SGI feature number 5352• Quantity required per platform — 10 SGI feature 5352

The configurator will automatically add the necessaryasset registration feature numbers (9001), the correctlicense tier codes for the quantity ordered and the correctSPO numbers.

202-026 -16-

Migrations and Upgrades to ENOVIA 3d com and DMUV5.8: 5693-SP1 DMU Space Analysis 1 AOP

0020 5691-DM1 with DS1 AOP to 5693-SP10021 5691-PS1 with DS1 AOP to 5693-SP1

5693-FIT DMU Fitting Simulator 2 AOP

0020 5691-DM2 with DFI AOP to 5693-FIT

5693-KIN DMU Kinematics Simulator 2 AOP

0020 5691-DM2 with DKI AOP to 5693-KIN

5693-DMO DMU Optimizer 2 AOP

0020 5691-DM2 with DOP AOP to 5693-DMO0021 5691-DPS with DOP AOP to 5693-DMO

Basic Machine-Readable Material

Feature DistributionEnvironment Number Medium

All Platforms 3410 CD-ROM

ENOVIA Portal Solutions Products can be ordered on thefollowing platforms:

• AIX Platforms (#5350)• Hewlett Packard HP-UX Platforms (#5351)• SGI-IRIX Platforms (#5352)• Microsoft Windows (#5353) — selected products only• Sun Solaris Platforms (#5354)

System Program Order

ENOVIA Portal programs for all platforms (UNIX andWindows) will be shipped under the 5628-DMU SPO. TheSPO is required for all program shipments and futureupdates.

Initial orders placed for a program type 5691 without acorresponding order or MES for the 5628-DMU SPO willeither fail order validation, or will not generate a mediashipment. The SPO is designated to the processor onwhich the program type 5691 is licensed. Each customernumber must have its own SPO.

Initial Orders: When ordering the first 5691-xxxconfiguration for ENOVIA Portal an order must also beplaced for the 5628-DMU SPO. Both the 5691-xxx programorder and the SPO must be for the same CPU systemtype/system number, and have the same scheduledshipment date.

Subsequent Licenses: The SPO must have a featurenumber for every ENOVIA Portal configuration that isinstalled or on-order. Therefore, when a configurationthat was not previously installed is ordered, the SPO mustbe updated.

To Update an On-order System: When a license for a new5691 program is ordered for an on-order system, the5628-DMU SPO must be updated to reflect the featurenumber of the licensed program desired. Also, for assetregistration and billing purposes an order for theindividual licensed program type 5691 is required.

To Update an Installed System: When a license for a new5691 program is ordered for an installed system, the5628-DMU SPO must be updated to reflect the featurenumber of the licensed program desired.

5628-DMU Feature Numbers: The following programfeature numbers are used with the 5628-DMU SPO toshow which configurations and products are installed.This information is used for shipment of media. Themaximum quantity of each of the features that may bespecified is one for each of the 5691 programs.

Program Feature Numbers for New Products inRelease 8

ProgramFeature Product Configuration orNumber Number Product Name

3035 5691-RTR Real Time Rendering 23036 5691-SML ENOVIA — MultiPDM —

SmarTeam Plug-in3312 5693-RTR Real Time Rendering 23300 5693-ANR DMU Engineering Analysis

Review 23301 5693-FIT DMU Fitting Simulator 23302 5693-KIN DMU Kinematics Simulator 23303 5693-DMO DMU Optimizer 23304 5693-SP1 DMU Space Analysis 13305 5693-HAA Human Activity Analysis3306 5693-HBR Human Builder3307 5693-HME Human Measurements Editor3308 5693-HPA Human Posture Analysis3309 5693-PHS Photo Studio3310 5693-PR1 ENOVIA DMU Digital Plant &

Ship Review 13311 5693-DT1 ENOVIA DMU Dimensioning &

Tolerancing Review 1

Customization Options: Select the appropriate featurenumbers to customize your order to specify the deliveryoptions desired. These features can be specified on theinitial or MES orders.

Example: If publications are not desired for the initialorder, specify feature number 3470 to ship media only.For future updates, specify feature number 3480 to shipmedia updates only. If, in the future, publication updatesare required, order an MES to remove feature number3480; then, the publications will ship with the next releaseof the program.

FeatureDescription Number

Initial Shipments

Serial number only (suppresses shipment 3444 of media and documentation)

Ship media only (suppresses initial 3470 shipment of documentation)

Ship documentation only (suppresses 3471 initial shipment of media)

Update Shipments

Ship Media updates only (suppresses 3480 update shipment of documentation)

Ship documentation only (suppresses 3481 update shipment of media)

Suppress updates (suppresses update 3482 shipment of media and documentation)

-17- 202-026

Expedite Shipments

Local IBM office expedite 3445 (for IBM use only)

Customer expedite process charge 3446 ($30 charge for each product)

Expedite shipments will be processed to receive 72-hourdelivery from the time IBM SDF receives the order. SDFwill then ship the order via overnight air transportation.

Unlicensed Documentation: One English softcopypublication CD-ROM is automatically included in allshipments. National Language Versions (NLVs) of thesoftcopy publications in French, German, and Japanesewill be available at a later time at no charge. To order,specify the language using the feature numbers below.Only one additional copy of a kit can be ordered perlicense.

FeaturePublication Name Number

ENOVIA Portal V5R8Softcopy Collection Kit — English 7100Softcopy Collection Kit — French 7101Softcopy Collection Kit — German 7102Softcopy Collection Kit — Japanese 7103

ENOVIA Portal V5R8 (3d com only)Softcopy Collection Kit — Chinese 7104

Additional Softcopy Collection Kits can be orderedthrough PUBORDER using the following numbers:

OrderPublication Name Number

ENOVIA Portal V5R8Softcopy Collection Kit — English SK3T-5188Softcopy Collection Kit — French SK3T-0572Softcopy Collection Kit — German SK3T-0573Softcopy Collection Kit — Japanese SK3T-0574

ENOVIA Portal V5R8 (3d com only)Softcopy Collection Kit — Chinese SK3T-0611

Displayable Softcopy Publications: ENOVIA Portal V5.8product publications are offered in displayable inprintable (HTML) and (PDF) softcopy form. All unlicensedmanuals are included. These softcopy manuals are partof the basic machine-readable material that automaticallyships with an order for a standard or customconfiguration. The manuals are shipped on CD-ROM.Terms and conditions for use of the machine-readablefiles are shipped with the product.

The displayable manuals are in HTML format and can beviewed in any of the supported environments using oneof the HTML browsers specified in the SoftwareRequirements section. The printable manuals are in PDFformat and can be displayed and printed with AdobeAcrobat Reader at minimum level 3.0. The AdobeAcrobat Reader may be downloaded, at no charge, from:

http://www.adobe.com/prodindex/acrobat/readstep.html

Subsequent updates (technical newsletters or revisionsbetween releases) to the publications shipped with theproduct will be distributed to the user of record for as longas a license for this software remains in effect. Aseparate publication order or subscription is not needed.

Terms and Conditions

Licensing: IBM Customer Agreement (ICA)

Designated Machine: Not required

Variable Charges Apply: No

Installation License or Location License Applies: No

Usage Restriction Applies: Additional licenses, features,or authorizations, as appropriate must be obtained toextend use levels.

Educational Allowance: Academic terms are available forthe ENOVIA Portal Solutions V5.8 products through theSpecial Bid Process. A qualifying institution for theseproducts will be able to purchase the products for anannual fee.

For qualification criteria and detailed terms andconditions contact Buz Nowicki ([email protected])or U.S. 248-552-5981 for additional information andapprovals.

Volume Discount: Contact your IBM representative.

Warranted: Yes

Licensed Program Materials Availability

• Restricted Materials of IBM: None• Non-Restricted Source Materials: None• Object Code Only (OCO): All

Testing Period: None

Program Services: Program services for ENOVIA PortalSolutions V5 will be available until discontinued by IBMupon six months′ written notice.

Customers may report problems against a given Releaseof ENOVIA Portal Solutions V5 for a limited time only. Thisservice period ends four months after the plannedavailability date of the second subsequent Release ofENOVIA Portal Solutions V5.

Therefore, the end of service date for ENOVIA PortalSolutions V5R6 will be four months after the plannedavailability date of this release.

For a list of all currently supported Releases of CATIA andENOVIA products, refer to:


On the left side select “Support” then click on“Release nomenclature and end of service dates” in the“What′s new” column.

If you have not yet obtained an IBM common registrationuserid, visit:

http://www.ibm.com/registration/selfreg

Program services offer a method of reportingcode-related problems for ENOVIA Portal Solutions V5licensed software products.

For technical assistance, go to the PLM Web page at:


On the left side select “Support” then click on the“Service requests, problem reporting” link.

202-026 -18-

Problems may be reported electronically, by facsimile, ormail and will be responded to via the same medium usedto submit the problem. IBM will respond to customerinquiries within two business days of electronic orfacsimile receipt and seven days of mail receipt advisingof the problem disposition.

Use one of the following methods to report problems:

• Mail:

IBM CorporationProduct Lifecycle Management2455 South Road P540Poughkeepsie, NY 12601-5400Attn: ENOVIA/CATIA APAR Coordinator

• Facsimile: 845-433-9901

• E-mail: [email protected]

• Electronic PMR submission:


On the left side select “Support”.

Electronic support gives the customer the option ofsubmitting code-related problems either by e-mail orthrough the CATIA/ENOVIA TechSupport Web site usinga Problem Management Report (PMR). When using thePMR option, all communications will be through the PMR.It is the customer′s responsibility to monitor and updatetheir problem no less than once a week.

If the problem reported is not known to be a code-relatedproblem, the customer will be informed that IBM willcontinue to work on it provided the customer has an ESOcontract.

Additional information on the ESO and other availablePLM services offerings is available by going to the PLMWeb page at:


On the left side select “Support”. Then on the left side,click on “Service and Support Offerings” and then on thenext frame expand “Support Offerings” and select“CATIA/ENOVIA Enhanced Support Offering”.

Preventive service is delivered through the nextRelease of ENOVIA Portal Solutions V5. The newRelease will also include corrections to problems,depending on the time of their submission and theirseverity.

Corrective Service for ENOVIA Portal Solutions V5Releases is delivered through “Service Packs” on aregular basis. A Service Pack includes corrections forSeverity 1 problems in production systems reported onthis release and all corrections available for allcomponents at the time it is built. Service Packs areprovided at the same time for all platforms currentlysupported. Each Service Pack supersedes the previousone and may be installed on top of the released level oron top of a previous Service Pack. No individualcorrections will be delivered between two Service Packs.No update of online documentation will be providedthrough Service Packs.

Customers may request a correction via a Service Packfor Severity 1 problems. A Severity 1 problem is definedas:

• A problem stopping production — this means thecustomer is already using the level for which herequests a fix in a production environment.

• A problem preventing migration — in this case, thecustomer must provide the migration plan.

• A problem halting testing of a given level — in thiscase, a fix will allow the customer to continue thetesting.

• Installation problem — a problem which prevents thecustomer from installing or using the product.

• Regression — problems reported as regressions maybe due to an operation which was being performederroneously or created incorrect data with a previousrelease and the current release no longer permitsthese operations. Therefore, each problem reportedas a regression must be evaluated, and trueregressions will be handled as Severity 1 problems.

Requests for corrections to a given Release of ENOVIAPortal Solutions V5 may be made up to four months afterthe next release of ENOVIA Portal Solutions V5 becomesavailable. After that date, no new Service Packs will bebuilt for that release. The final Service Pack will still beavailable for ordering on CD-ROM via the IBM SupportCenters for the duration of the service period of eachRelease. This service period ends four months after theplanned availability of the second subsequentRelease of ENOVIA Portal Solutions V5.

With the availability of this release, the end of correctiveservice date for ENOVIA Portal Solutions V5R7 will be fourmonths after the planned availability date of this release;the end of service (EOS) date for ENOVIA Portal SolutionsV5R6 will be four months after the planned availabilitydate of this release.

For help guides and information on education, go to thePLM Web page at:


On the left side select “Education”.

IBM Operational Support Services — Support Line: No

Other Support: PLM Support Centers

Prices

Prices

Contact your IBM representative for prices information forthis announcement.

Trademarks

WebSphere and PowerPC 604 are trademarks ofInternational Business Machines Corporation in the UnitedStates or other countries or both.SP1, AIX, RS/6000, MQSeries, and DB2 are registeredtrademarks of International Business Machines Corporationin the United States or other countries or both.Intel and Pentium are registered trademarks of IntelCorporation.Microsoft is a trademark of Microsoft Corporation.Windows and Windows NT are registered trademarks ofMicrosoft Corporation.Java is a trademark of Sun Microsystems, Inc.UNIX is a registered trademark is a registered trademark ofthe Open Company in the United States and other countries.Domino is a trademark of Lotus Development Corporationand/or IBM Corporation.Lotus is a registered trademark of Lotus DevelopmentCorporation and/or IBM Corporation.Other company, product, and service names may betrademarks or service marks of others.

-19- 202-026