entrance/exterior door furniture centre door knobs · centre door knobs entrance/exterior door...
TRANSCRIPT
DF5:010
Engraving available on all four knobs - please contact us for further details.
Finish matched dome nut
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
© Frank Allart & Company 2015
6
25 SQ
25 SQ
6
Centre Door KnobsEntrance/Exterior Door Furniture
Four modern contemporary designs of Centre Door Knob, all CNC machined from blocks of solid brass to produce perfect detailing and proportion.
Coordinating Letter Plates, Door Knockers and Cylinder Pulls can be found within this section.
3351 3365
3356 3366
FixingsSupplied with anti-rotation pin, finish matched dome nut and washer & M12 x 75 allthread to suit doors up to 57mm thick (longer allthreads available upon request). Pairs of Knobs are supplied with a back-to-back fixing system.
3365/3366
63
7689
3351/3356
63
102102
custom sizes available upon request
1925
Centre Door KnobsEntrance/Exterior Door Furniture
DF5:020
A selection of Art Deco and Classic Octagonal Centre Door Knobs.
The two sizes of 3361 & 3376 are CNC machined from blocks of solid brass to produce perfect detailing and superb clean lines.
The 9464 and the two sizes of Octagonal Knob are of semi-solid construction, yet still retain substantial heft.
2590/2592
9464
Knob size Plate size P
A 81 x 63 101 x 81 60
B 101 x 77 125 x 101 63
2590 shown
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
© Frank Allart & Company 2015
A/F = dimension across flats
2592
108
112 A/F
70 x 108 51 x 88
65
9464
P
3361/76
Plate size
Knob size
3361 (round edge design) 3376 (square edge design)
100 A/F
2590
75
78 A/F
69 A/F
Engraving available on all four knobs - please contact us for further details.
FixingsSupplied with anti-rotation pin, finish matched dome nut and washer & M12 x 75mm (except 9464: M10 x 75mm) allthread to suit doors up to 57mm thick (longer allthreads available upon request). Pairs of Knobs supplied with back-to-back fixing system.
custom sizes available upon request
Finish matched dome nut
A size shown B size shown
25 SQ
Centre Door KnobsEntrance/Exterior Door Furniture
Four Centre Door Knob designs, three of which are available in two sizes.
The two sizes of 2591 are CNC machined from blocks of solid brass to produce perfectly cut facets. The others are of semi-solid construction, yet still retain substantial heft.
FixingsSupplied with anti-rotation pin, finish matched dome nut and washer & M12 x 75mm (except 2594: M10 x 75mm) allthread to suit doors up to 57mm thick (longer allthreads available upon request). Pairs of Knobs supplied with back-to-back fixing system.
Finish matched dome nut
custom sizes available upon request
custom sizes available upon request custom sizes available upon request
© Frank Allart & Company 2016
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
2594 2653
2591
D (dia) d (dia) P (projection)
2653 A Ø 73 Ø 72 80
2653 B Ø 100 Ø 95 109
D (dia) d (dia) P (projection)
2594 A Ø 75 Ø 72 75
2594 B Ø 100 Ø 95 90
1067
A/F a/f P (projection)
2591 A 75 87 60
2591 B 100 100 63UPDATED
07/16 DF5:030
A/F = dimension across flats
P
d D
P
d D
93
76 A/F 72 A/F
A/Fa/f
P
UPDATED 09/16
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
FixingsSupplied with finish matched blind nuts and washers, M6 x 75mm allthreads to suit doors up to 57mm thick (longer allthreads available upon request).
Letter PlatesEntrance/Exterior Door Furniture
DF5:040
Four CNC machined Letter Plates with inward opening sprung flaps.
Interior Tidies, coordinating Centre Door Knobs, Door Knockers and Cylinder Pulls can be found within this section.
3364 (round edge design)
3379 (square edge design)
3354
3359
Finish matched M6 blind nut supplied
side view
side view
side view
side view
© Frank Allart & Company 2016
6
330
100
282 bolt centres
aperture size 250 x 46
CUSTOM SIZES These Letter Plates
can be specially manufactured in
custom sizes if desired.
UPDATED 06/15
Finish matched M6 blind nut
1102
1101
9453
Overall size
Aperture size
1101 A 254 x 89 179 x 46
B 305 x 95 230 x 47
C 356 x 127 278 x 55
D 406 x 127 332 x 76
9453 255 x 90 182 x 50
1102 Overall size
Designed to work with Letter Plate code:
A 305 x 96 1101A/9453
B 356 x 96 1101B/3354/ 3359/3364/3379
C 406 x 96 1101C
D 430 x 96 1101D
ONLY
ONLY
ONLY
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
© Frank Allart & Company 2015
Letter Plates & Interior TidiesEntrance/Exterior Door Furniture
DF5:050
Two Letter Plates with inward opening sprung flaps, both offered in all finishes including the solid bronzes; along with an Interior Tidy available in a variety of matching sizes.
Fixings1101 & 9453 supplied with finish matched blind nuts and washers, M6 x 75mm allthreads to suit doors up to 57mm thick (longer allthreads available upon request).
1102 supplied with finish matched no.4 x 12mm wood screws.
Finish matched dome nut
2564 135 x 110
3350 106 x 100
Door KnockersEntrance/Exterior Door Furniture
DF5:060
Three heavyweight Door Knockers, one classic Drop Ring and two modern contemporary square designs which coordinate with Letter Plates, Centre Door Knobs and Cylinder Pulls found within this section.
FixingsSupplied with finish matched dome nuts and washers, M6 x 75mm allthreads to suit doors up to 57mm thick (longer allthreads available upon request).
3355 106 x 100
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
© Frank Allart & Company 2015
Finish matched dome nut
7453 180 x 55
Door KnockersEntrance/Exterior Door Furniture
Three Art Deco period inspired Door Knockers, all well proportioned and of heavy, solid construction, and our take on the classic ‘Doctors Pattern’ Door Knocker.
FixingsSupplied with finish matched dome nuts and washers, M6 x 75mm allthreads to suit doors up to 57mm thick (longer allthreads available upon request).
3360 (round edge design) 149 x 44 3375 (square edge design) 149 x 44
9471 145 x 40
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
© Frank Allart & Company 2015 DF5:070
Bell PushesEntrance/Exterior Door Furniture
DF5:080
7852 7853
7855 7856
7859 7860
approx actual size B approx actual size B
approx actual size B approx actual size B
approx actual size B approx actual size B
Six classic designs of concealed fix Bell Push - each offered in four different diameters - complementing the Allart Select Door Knob and Lever Rosettes in section ST3; all supplied with finish matched push buttons.
FixingsSupplied with subrose and no.4 x 13mm wood screws.
SUBROSE SUPPLIED
D
A B C D
D (diameter) Ø 44 Ø 54 Ø 64 Ø 76
Custom sizes available upon request - surcharge may apply.
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
© Frank Allart & Company 2015
Bell PushesEntrance/Exterior Door Furniture
DF5:090
Two traditional and four contemporary designs of concealed fix Bell Push - each offered in up to four different diameters - complementing the Allart Select Door Knob and Lever Rosettes in section ST3; all supplied with finish matched push buttons.
7854 7851
7857 7862
7858 (available in B, C & D size only) 7861
approx actual size B approx actual size B
approx actual size B approx actual size B
approx actual size B approx actual size B
FixingsSupplied with subrose and no.4 x 13mm wood screws.
A B C D
D (diameter) Ø 44 Ø 54 Ø 64 Ø 76
D
SUBROSE SUPPLIED
Custom sizes available upon request - surcharge may apply.
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
© Frank Allart & Company 2015
2535
2538 (B & C size only)
2534
2537 (round edge design)
2533
2536 (square edge design)
Bell PushesEntrance/Exterior Door Furniture
DF5:100
A selection of nine Bell Push designs - each offered in three sizes - complementing the Allart Select Door Knob & Lever Backplates (see section ST4), supplied with fully finish matched push buttons.
FixingsSupplied with finish matched no.6 x 19mm wood screws.
2532 2531 2530
L
W
A B C
L x W 44 x 44 54 x 54 64 x 64
2530 only 62 x 44 72 x 54 82 x 64
A size shown
All images shown below are B size (54mm)
Custom sizes available upon request - surcharge may apply.
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
© Frank Allart & Company 2015
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
Bell PushesEntrance/Exterior Door Furniture
DF5:105
A selection of twelve 5mm thick Bell Push designs to complement the Allart Select Door Knob & Lever Backplates (see section ST4), supplied with fully finish matched push buttons. The square edge design is also available 3mm thick in two sizes, again with fully finish matched push buttons.
FixingsSupplied with finish matched no.6 x 19mm wood screws.
2683268226812680 2684
268826872686
2685
2690
square edge design round edge design
26932692
computer generated images
2692
07/16© Frank Allart & Company 2016
75*
32
* except 2680 = 87 high
5
2600
A size shown
L
W
2600 A B
L x W 75 x 28 75 x 32
3mm THICK OPTION - SQUARE EDGE DESIGN ONLY
3
Cylinder Pulls & NumeralsEntrance/Exterior Door Furniture
DF5:110
Two designs of Cylinder Pull for use in conjunction with rim cylinder night latches.
A Cylinder Pull for use with dead-bolts on storeroom doors, with the option of Euro/Oval/Keyhole cutouts.
A full set of Numerals (0-9) in Times New Roman Font offered with rear fixing spikes.
Fixings0093 fitted with spikes that embed into the door face.1997 supplied with finish matched no.6 x 19mm wood screws. 1996 & 9472 are fitted with an anti-rotation pin on the rear.
© Frank Allart & Company 2016
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
A full selection of escutcheons and cylinder seating collarscan be found in section DF6.
0093 75 high
D
d
1997 82 x 43shown with euro cyl cutout (E)
� cutout for standard 32 x 18mm oval cylinder (larger cutouts available upon request)
oval cyl cutout (O)� standard keyhole (S)
approx actual size
1996 82 x 43 9472 81 x 43
code Cylinder
TypeD (d)
UK UK standard 33 30
US US standard 35 32
UPDATED 07/16
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
Cylinder PullsEntrance/Exterior Door Furniture
Four modern contemporary Cylinder Pulls designed to complement Letter Plates, Centre Door Knobs, and Door Knockers found within this section - each offered machined to accept either the UK or US standard cylinders.
3352
3357
DF5:120
FixingsFitted with an anti-rotation pin on the rear.
3362 (round edge design)
3377 (square edge design)
d
D
code Cylinder Type D (d)
UK UK standard 33 30
US US standard 35 32
UPDATED 07/16© Frank Allart & Company 2016
50
57
13
19
12
50
57
13
19
12
50
50
57
57
13
13
19
19
12
12
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
Cylinder CoversEntrance/Exterior Door Furniture
Four designs of Cylinder Cover - beaded oval, plain oval, round and square - each offered machined to accept either the UK or US standard mortice cylinders.
DF5:130
Fixings3927 & 4057 - supplied with finish matched no.6 x 19mm wood screw for anti-rotation.4058 & 4059 - fitted with an anti-rotation pin on the rear.
3927
4057
4058
4059
UPDATED 07/16© Frank Allart & Company 2016
d
D
code Cylinder Type D (d)
UK UK standard 32 29
US US standard 35 32
13
50
8
8
6
6
16
58
45
16
58
45
13
50
50
50
Entrance/Exterior Door Furniture
DF5:140
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
UPDATED 07/16
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
Entrance/Exterior Door Furniture
Auxiliary Deadbolt Turns - 54mm & 64mm Ø Rosettes
A US specification Auxiliary Deadbolt Turn available in two diameters to cater for either undrilled or pre-bored doors.
This Round Plate & Thumb Turn combination is offered with twelve Round Plate designs and over twenty different Thumb Turns. A Patio function version is also available in both sizes (undrilled doors only).
DF5:150
A B
D (diameter) Ø 54 Ø 64
Application Undrilled Doors only
Pre-Bored or undrilled Doors
8503 size A Rosette with T51 Turn
85038502 85018500
85078506 85058504
8511851085098508
approx actual size A
computer generated images (A size shown) - all shown with T51 Turn
D
6
See Allart Select section, page ST7:130/140 for Turn options
FixingsSupplied with finished matched M3 x 10mm machine screws and a Cylinder Fixing Plate (Rim Cylinder and fixing bolts not supplied).Patio Function (FTP) also supplied with no.6 x 19mm wood screws.
Rim Cylinder (not supplied)
Cylinder Collar rear view (64mm Ø x 15mm thick shown)
see page DF5:160
B size (64mm Ø) Pre-Bored Door set-up illustrated
Mortise Deadbolt (not supplied)
finished matched M3 x 10mm machine screws
Cylinder Fixing Plate (21/8″ bore)
Rim Cylinder fixing bolts
(not supplied)
Turn
Rosette (64mm Ø shown)
rear view showing Turn machined to accept Rim
Cylinder tailpiece
A size (54mm Ø ) Cylinder Fixing Plate for 15/8″Ø bore - suppliedwith A size Rosettes for undrilled door application
PATIO FUNCTIONTurn on plate supplied with tailpiece fitted and sub-rose (woodscrew fixed). Add FTP to code as detailed above.
finished matched M3 x 10mm machine screws
tailpiece fitted
Wood screw fixed subrose
© Frank Allart & Company 2016
6
Entrance/Exterior Door Furniture
Auxiliary Deadbolt Collars - 54 & 64mm Ø Rosettes A US specification Auxiliary Deadbolt Collar available in two diameters to cater for either undrilled or pre-bored doors; both designed to work with 44mm & 57mm thick doors, with an optional Extension Collar to cater for 34mm thick doors.
The Cylinder Collars are offered in twelve designs to match up with the Deadbolt Thumb Turns to be found on page DF5:150.
DF5:160
8543 shown with optional 6mm Extension Collar
85438542 85418540
85478546 85458544
8551855085498548
approx actual size A
optional Extension Collar (code 8000)
32D
15
15
35
32D
38
computer generated images (A size shown)
54mm Ø Cylinder Collar (rear view)
54mm Ø optional Extension Collar
(code 8000A)
64mm Ø Cylinder Collar (rear view)
64mm Ø optional Extension Collar
(code 8000B)
STANDARD MACHINING
(designed to work with Baton rim cylinders or
equivalent)
USBMACHINING
OPTION (for Baldwin
rim cylinders)
machined to locate into 21/8″ bore
machined to locate into 15/8″ bore
Rim Cylinder (not supplied)
Rim Cylinder (not supplied)
A B
D (diameter) Ø 54 Ø 64
Application Undrilled Doors Pre-Bored Doors
1521
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
© Frank Allart & Company 2015
UPDATED 07/16
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
Entrance/Exterior Door Furniture
Auxiliary Deadbolt Turns - 54 & 64mm Square Plates
A B
L x W 54 x 54 64 x 64
8520 only 72 x 54 82 x 64
Application Undrilled Doors only
Pre-Bored or undrilled Doors
A US specification Auxiliary Deadbolt Turn available in two sizes to cater for either undrilled or pre-bored doors.
This Square Plate & Thumb Turn combination is offered with nine Square Plate designs and over twenty different Thumb Turns. A Patio function version is also available in both sizes (undrilled doors only).
shown with T54 turn
shown with T55 turn
shown with T52 turnshown with T61 turn
shown with T56 turn shown with T53 turn
8524 size B Plate shown with T61 Turn
85228521
85288527 (round edge design) 8526 (square edge design)
85248523 8525
8520
DF5:170
L x W
6
shown with T69 turnshown with T67 turnshown with T56 turn
computer generated images (size A shown)
See Allart Select section, page ST7:130/140 for Turn options
Rim Cylinder (not supplied)
Cylinder Collar rear view (54mm x 15mm thick shown)
see page DF5:180
Mortise Deadbolt (not supplied)
finished matched M3 x 10mm machine screws
Cylinder Fixing Plate (15/8″ bore)
Rim Cylinder fixing bolts
(not supplied)
Turn
Plate (54mm shown)
rear view showing Turn machined to accept Rim
Cylinder tailpiece
A size (54mm) Undrilled Door set-up illustrated B size (64mm) Cylinder Fixing Plate for 21/8″Ø bore - suppliedwith B size Plates for pre-bore door application
PATIO FUNCTIONTurn on plate supplied with tailpiece fitted and sub-rose (woodscrew fixed). Add FTP to code as detailed above.
finished matched M3 x 10mm machine screws
tailpiece fitted
Wood screw fixed subrose
FixingsSupplied with finished matched M3 x 10mm machine screws and a Cylinder Fixing Plate (Rim Cylinder and fixing bolts not supplied).Patio Function (FTP) also supplied with no.6 x 19mm wood screws.
© Frank Allart & Company 2016
Entrance/Exterior Door Furniture
8564 size A shown in both 15mm & 21mm thickness options
15mm thick 21mm thick
Auxiliary Deadbolt Collars - 54 & 64mm Square Plates
A US specification Auxiliary Deadbolt Collar available in two sizes to cater for either undrilled or pre-bored doors; and in two thicknesses to cater for doors between 34mm & 57mm thick.
The Cylinder Collars are offered in nine designs to match up with the Deadbolt Thumb Turns to be found on page DF5:170.
85648563
85628561
85688567 (round edge design) 8566 (square edge design)
8565
8560
DF5:180
A BDoor
ThicknessL x W 54 x 54 64 x 64
8560 only 72 x 54 82 x 64
T (thickness options)
15 15 44 & 57
21 21 34
Application Undrilled Doors
Pre-BoredDoors
64mm Cylinder Collar 15mm thick (rear view)
54mm Cylinder Collar 15mm thick (rear view)
machined to locate into 15/8″ bore
machined to locate into 21/8″ bore
computer generated images (A size shown 15mm thick)
32T
35
32T
38
STANDARD MACHINING
(designed to work with Baton rim cylinders or
equivalent)
USBMACHINING
OPTION(for Baldwin
rim cylinders) Rim Cylinder (not supplied)
15
L x W
21
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
© Frank Allart & Company 2015
S
W
FixingsDeadbolt Turns supplied with finished matched M3 x 10mm machine screws and a Cylinder Fixing Plate (Rim Cylinder and fixing bolts not supplied).
Entrance/Exterior Door Furniture
Diamond orientated, USA specification, Auxiliary Deadbolt Turns & Collars - both available in two sizes to cater for either undrilled or pre-bored doors.
The Cylinder Collar is also offered in two thicknesses to cater for doors between 34mm & 57mm thick.
Please contact us should you be unsure how a certain combination might look and we will be pleased to provide you with an image for your perusal.
Auxiliary Deadbolt Turns & Collars 54 & 64mm Diamond Plates
6
DF5:190
8530
8562
8531
8563
8532
8564
8529 size A shown with T67 turn
8561 size A shown 15mm thick
shown with T52 turnshown with T61 turnshown with T69 turn
computer generated images (A size shown)
computer generated image
computer generated images (A size shown 15mm thick)
32
35
32 T
38
STANDARD MACHINING(designed to work with Baton rim cylinders or equivalent)
USB MACHINING OPTION
See Allart Select section, page ST7:130/140 for Turn options
T
A B
S (square) 54 x 54 64 x 64
W (width) 76 90
Application Undrilled Doors Pre-Bored Doors
W
S
A B Door Thickness
S (square) 54 64
W (width) 76 90
T (thickness options)
15 15 44 & 57
21 21 34
Application Undrilled Doors
Pre-BoredDoors
T
UPDATED 06/15
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
© Frank Allart & Company 2015
DF5:200
Entrance/Exterior Door Furniture
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
USA Exterior Door Sets
DF5:210
Entrance/Exterior Door Furniture
Available in Allart Select sections ST4 & ST5
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
© Frank Allart & Company 2015
DF5:220
Entrance/Exterior Door Furniture
Multipoint Door SetsAvailable in Allart Select sections ST4 & ST5 and Door Furniture section DF1.
Landscape logo with strapline for Advertising and Promotion
Formal Corporate logowith Birmingham England
Abbreviated Logo for use where space is restrictive - Landscape and Portrait Shield Logo device only - to support main logo in a secondary location or watermark
Can be used with and without keyline depending on situationCan be used with and without keyline depending on situation
®
© Frank Allart & Company 2015