eq prime air handling unit - hvacr.pl · the semco rotary energy recovery device the semco rotary...
TRANSCRIPT
eQ PRIME Air Handling UnitThe right choice
PRIME
What benefits does eQ PRIME give you?
2
NEEDS SELECTION DELIVERY START-UP OPERATION
➦➦➦➦eQ PRIME – The right choice!
1) Choose the optimal size according to air volume.
Cost effective
Energy saving
Simple installation
Quick delivery
Packaged controls
Space saving
Integrates with the BMS
Start-up by Fläkt Woods
➜ Save costs by value engineering
➜ Reduce plantroom size/steelworks
➜ Reduce cooling loads (Chillers)
➜ Reduce heating loads (Boilers)
➜ Reduce airflow and AHU cost
➜ Reduce ducting size and cost
➜ Many more possible savings to suit your projects
➜ Save energy by efficient design
➜ Highest energy recovery devices
➜ Removed or reduced cooling machines
➜ Reduced or removed boilers
➜ Energy monitoring controls
➜ Reduced airflow
➜ New lowest energy fan (Centriflow plus with PM-motor)
eQ PRIME is a simple solution
to many of your engineering
problems
Capital cost savings! Energy cost savings!
0 1 2 3 4 5 6 7 8 9
0,36 3,6 7,2 10,8 14,4 18 21,6 25,2 28,8 32,4 x 1000 m3/h
005
008
011
018
023
032
041
050
eQ PRIME
Max flow SFPv ≤ 2 kW, m3/s
Max flow, m3/s
Flowm3/s
x1000 m3/h
PRIME
Height
Width
Ductconnection
Length
Unitsize
Nominal airflow m3/s
Fan Length, mmWidth,
mmHeight,
mmLongest block length, mm
Ductconnection,
mm
Approx. Weight, kg
5 0.40 Small 1800 800 952 700 500 x 300 310
80.65 Small 1800
1100 1152700
800 x 400 4200.80 Large 1800 700
111.1 Small 1900
1200 1352700
800 x 400 5301.3 Large 2000 750
181.8 Small 2100
1400 1552750
1100 x 500 6602.0 Large 2200 800
232.9 Small 2800
1700 1852950
1400 x 600 11003.3 Large 2900 1000
323.6 Small 3000
1800 20521000
1400 x 800 12504.2 Large 3100 1050
414.6 Small 3150
2000 21521050
1700 x 800 15005.3 Large 3250 1100
505.9 Small 3550
2300 24521250
2000 x 800 1800Large 3650 1300
Subject to alteration. 3
2) Dimensions, weight
and connection
dimensions are
shown in the table
below.
2) Dimensions, weight
and connection
dimensions are
shown in the table
below.
Size 023 – 050, withintegrated controllerin the rotor
Size 005 – 018, withcontrol unit on the roof
Height
Ductconnection
Width
Length
Unit length is a guide based on standard filter. ACON selection program gives exact data.
New!
PM Motor Fan set
The New permanent magnet motors provide the highest energy efficient savings, helping to lower SFPv!
Connection
Rectangular ductconnections are availablefor quick duct fitting
New!
The Semco Rotary energy recovery device
The Semco Rotary device is a market leader and willprovide considerable cooling and heating reductions.
Control and adjustment system
Intelligent control system which interfaces with the building management systems a providing optium performance and energy monitoring for the AHU.
Base frame
Designed to simplify installationand reduce on-site costs. Theunit is delivered ready-mountedon a single baseframe, with theoption of separating the unit ifnecessary.
4
Control and adjustment system
Intelligent control system which interfaces with the building management systems a providing optium performance and energy monitoring for the AHU.
Filter
Class F7 supply/extract air filter for a clean indoor environment and protection of unit interior. Glass fiber extra low pressure drop.
Display IP65
The Hand held controller is designed to be simple to use and its magnetic backing allows you to easily attach and remove
the controller.
The eQ Prime control and adjustment system has the following standard functions
Energy saving summer night cooling function
Fan flow control (CAV)
Temperature regulation control
Control of accessories, heating/cooling coils etc.
Cooling recovery
Filter monitoring
BMS (controls) interface options
Free and comprehensive web server schematic
Input: extended or forced operation via
external switches
Input: external fire alarm
Alarms functions
See list of accessories on page 6 for more functions.
•••••••••
•
•
PRIME
Subject to alteration. 5
Parts for ducts
Dampers with actuator, two positions with spring.
Heating coil with frost protector, valve and actuator.
Cooling coil with valve and actuator.
For your convenience, the unit can
be delivered with the following
duct components:
Duct components and accessories
Optional Accessories
6
Damper
Heating coil
eQ PRIME offers full flexibility
eQ PRIME offers full flexibilty when it comes to heating and cooling coils. Coils for duct mounting are available for selection in Acon (web selection program) in a wide range of sizes and configurations.
Cased coils offer the advantage that you can be sure that specified performance is delivered and avoids a lot of the installation work involved in supporting, connecting and insulating duct coils. In addition, you can choose to have an inspection section with the coils.
The following accessories can bedelivered with the unit:
Adjustable feet for base frame
Fan pressure control (VAV)
Façade and room sensors for night cooling or night heating functions
Timer for extended or forced operation
Frost protector for heating coil (NB: Frost protector included if unit is delivered with heating coils)
CO2-sensor
PIR Movement detector including room lighting control function
Zone control
Control of extract air fan
Smoke detector and fire damper with accompanying control unit
Coils placed after the fan section are put under positive pressure helping to remove condensation.
PRIME
Subject to alteration. 7
The eQ PRIME unit
The unit can be transported to the plant-room either complete or in blocks where access is limited. The blocks are easy to assemble.
8
Set operating periods and setpoints in
the control unit
Check that installation has been
performed correctly
Adjust the controllers to ensure even,
economical control
Set alarm parameters to customer requirements
We help you get started!
Fast, Easy and Safe
For safe, Optimal operation,We help you to:
This is a valuable service for our customers since we customise the unit’s control system settings, thus ensuring energy-efficient operation and maximising the units’ life.
The operative words are Fast, Easy and Safe, so you can confidently allow Fläkt Woods to take care of everything from the order through to delivery and startup.
Fläkt Woods takes care of the commissioning and initial startup of your units.
Your design to site performance.
>
>
>
>
>
>
Unit commissioned by:
Please contact your local Fläkt Woods service
department
Set operating periods and setpoints in
the control unit
Check that installation has been
performed correctly
Adjust the controllers to ensure even,
economical control
Set alarm parameters to customer requirements
Subject to alteration. 9
Simple ordering using the Acon product selection program or via your local sales office
Prior to commissioning, the installation completion checklist should be sent to Fläkt Woods
A preliminary appointment is made with your nearest local commissioning team
Request placed with Fläkt Woods Technical Sales Support (TSS) Control Systems (CS)
We contact you to make a definite appointment
Commissioning carried out. Setpoints and operating periods are set according to your requirements
You receive a report after the commissioning is completed
Acon powerful and easyproduct selectionAcon is our tool for the selection and planning of air handling units. This is a web-based program that is updated regularly without the user having to download and install updates.Acon gives you all this information and support required for good planning.
Product dimensions
Noise data
Efficiency
LCC
Delivery time
Dxf and Dwg files can beexported to CAD software
Support is available for Autodesk´s i-drop
Documentation alwaysup to date
Subject to alteration. 9
Commissioning of eQ PRIME – How it works
Project unique flow chart with real time values.
Adjust set points, scheduler, exception calendar
etc convenient from remote.
Trend log for follow up and optimization.
E-mail client for alarms.
Reducing emergency visits.
Minimizing downtime.
Easy installation.
>>
>>>>>
Control equipment
eQ Smart web
The eQ Smart web constantly monitors
the health, readiness and performance
of the eQ by staying in control of the unit
24/7, 365 days a year!
SimplicityThe eQ PRIME has been developed to be easy to design,
install and use. The integrated control equipment is
supplied programmed, configured and tested, together
with all the necessary field components. The control
system conforms to EU directives (MD, EMC and LVD)
and is CE marked.
The eQ PRIME is the perfect solution for both small
installations with straightforward control functions, and
also for large installations with data communication
requirements.
Quick installationThe eQ PRIME is self-contained and requires no major on-
site electrical installation. The control equipment is ready
to go as soon as the unit is installed. A true Plug and Play
Air handling unit.
High qualityThe production of the eQ PRIME is characterized by a
rigorous quality assurance system to ensure an approved
and electrically safe product. Naturally the standardized
design is also a guarantee of cost effectiveness, reliability
and high quality.
10
Fläkt Woods a provider for all your needsFläkt Woods is a provider of many products and systems for a wide range of specialized market sectors. Please see a few of these products below.
Subject to alteration. 11
Solutions for all your air climate and air movement needsFläkt Woods is a global leader in air management. We specialise in the design and manufacture of a wide range
of air climate and air movement solutions our collective experience is unrivalled. Our constant aim is to provide
systems that precisely deliver required function and performance, as well as maximise energy efficiency.
Air Handling Units
(AHUs)
Air Terminal Devices
and Ducts
Chilled Beams
Residential ventilation Acoustical Products
Energy recovery
Controls and drives
Chillers
Fans
ENERGYEXPERTISEENVIRONMENT
Save energy, your economy and the environment with Fläkt WoodsEnergy optimisation is an important aspect of ventilation whereFläkt Woods has widely recognised expertise. We use highlyrational e3 products and solutions, which serve the dual purposeof saving both the environment and your long-term economy. www.flaktwoods.com
Fläkt Woods has the capability to combineenergy efficient (e3) products into fullyintegrated (i3) systems.
FWG
-eQ
PR
IME
G
B 2
012.
09-9
034
© C
opyr
ight
20
12
Flä
kt W
oods
Gro
up
Con
desi
gn In
foco
m A
B +
46 3
6 2
91
42
10
We Bring Air to Life
Fläkt Woods is a global leader in air management.We specialize in the design and manufacture of a widerange of air climate and air movement solutions.
Our collective experience is unrivalled.We are constantly aiming to provide systems thatprecisely deliver required function and performance aswell as maximum energy efficiency.
Fläkt Woods Group SA18, avenue Louis Casaï, CH-1209 Geneva, SwitzerlandTel. +41 22 309 3800email [email protected] www.flaktwoods.com
See global website for international sales offices www.flaktwoods.com