et hernet/ip error c ode decoder - omron automation...
TRANSCRIPT
Et
therNNet/IP
P Errror C
Code Decoder
Version12/19/
r
n 2.20 /2014
This docconnectinand NJ p Section
1. G
2. U
mri
3. R
ument is inteng EtherNet
products. De
n 1: Readin
Go online wit
Upload the pamodule is diff
ght clicking
Right Click on
ended to hel/IP devices tetailed troub
ng the Erro
h the Omron
arameters frferent from ton the PLC
n the PLC / M
f
Pa
lp the user idto Omron PL
bleshooting p
or Code
n Network C
rom the PLCthe configura/ MAC, and
MAC and se
age 2 of 16
dentify the cLC and MACprocedures f
Configurato
C / MAC if theation in the Nselecting Pa
elect Monito
causes of errC controllersfor common
or for EtherN
e configuratNetwork Conarameter / U
or.
ror codes ges such as CSerrors are a
Net/IP.
ion in the Etnfigurator foUpload.
enerated whS1, CJ2, CJ1also provided
therNet/IP r EtherNet/IP
en 1, d.
P by
4. GNRin
Go to the CoNodes with coRefer to the enformation.
nnection taommunicatioerror code lis
Pa
b. The detaons errors wst in Section
age 3 of 16
ailed error cowill be shown
2 of this do
ode for eachn with a red cocument for t
h device is shcircle next tothe specific e
hown in Stato the node. error
tus.
Section
N
01:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:001:0
n 2: Error C
Note: error
0100 Conne0103 Transp0106 Owne0107 Target0108 Invalid0109 Invalid0110 Target0111 RPI no0113 Out of0114 Vendo0115 Produ0116 Revis0117 Invalid0118 Invalid0119 Non-L011A Target011B RPI is011C Transp011D Produ011E Direct011F Invalid0120 Invalid0121 Invalid0122 Invalid0123 Invalid0124 Invalid0125 Invalid0126 Invalid0127 Invalid0128 Invalid0129 Invalid012A Invalid012B Invalid012C Config012D Consu012E Produ012F Incons0130 Incons
Code List
codes show
ection in use oport class andrship Conflictt connection n
d network cond connectiont for connectiot supported f connections or ID or Product Type Mision Mismatcd Produced d or inconsisteListen only cont object out of smaller thanport Class Noction Trigger ion Not Supp
d Originator tod Target to Ord Originator tod Target to Ord Originator tod Target to Ord Originator tod Configuratiod Originator d Target to Od Configuratiod Consuming d Producing Aguration Symbuming Symbocing Symbol sistent Applicsistent Consu
Pa
wn in bold h
or duplicate fod trigger comt not found nnection paran size on not config
duct Code mimatch
ch or Consumeent configuratnnection not of connections the productio
ot SupportedNot Supporteorted
o Target Netwriginator Netwo Target Netwriginator Netwo Target Netwriginator Netwo Target Netwon Size to Target Siz
Originator Sizon ApplicationApplication P
Application Pabol Does Not
ol Does Not ExDoes Not Exiation Path Co
ume Data For
age 4 of 16
have troubl
orward openbination not s
meter
ured
ismatch
ed applicationtion applicatioopened s on inhibit time
ed
work Connectwork Connectwork Connectwork Connectwork Connectwork Connectwork Connect
zeze
n Path Path ath Exist xist ist ombination mat
eshooting p
supported
n path on path
e
tion FIXVARtion FIXVARtion Priority tion Priority tion Type tion Type tion Redunda
procedures
nt_Owner
s in section
3.
01:001:001:001:001:001:001:001:001:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
01:0
0131 Incons0132 Null F0133 Conne0203 Conne0204 Uncon0205 Param0206 Messa0207 Uncon0301 No bu
0302 Netwo
0303 No co
0304 Not co
0305 Sched
0306 Sched
0311 Port n
0312 Link a
0315 Invalid
0316 Error i
0317 Sched
0318 Link a
0319 Secon
031A Rack c
031B Modul
031C Misce
031D Redun
031E No mo
availa
031F No mo
availa
0800 Netwo
0810 No tar
0811 No ori
sistent Producorward Openection Timeouection timed onnected requemeter error in age too large nnected acknoffer memory a
ork bandwidth
nsumed conn
onfigured to s
dule signature
dule signature
ot available
address not va
d segment in
in Forward Cl
duling not spe
address to sel
ndary resourc
connection al
le connection
ellaneous
ndant connec
ore user confi
ble in the pro
ore user confi
ble in the pro
ork link in path
rget applicatio
ginator applic
Pa
ce Data Form Function No
ut Multiplier Nout est timed outunconnectedfor unconnecowledgementavailable
h not available
nection ID filte
send schedule
e mismatch
e validation no
alid
connection pa
lose service c
ecified
f invalid
ce unavailable
lready establi
already esta
ction mismatc
igurable link c
oducing modu
igurable link c
oducing modu
h to module is
on data availa
cation data av
age 5 of 16
mat t Supported
Not Acceptable
request servcted send sert without reply
e for data
er available
ed priority dat
ot possible
ath
connection pa
e
shed
ablished
h
consumer res
le
consumer res
le
s offline
able
vailable
e
vice rvice y
ta
ath
sources
sources
Section
EdCreN 1
n 3: Troubl
EDS file diffeifferences in
Configurator ead the actu
Notepad) to m
. Using theThe Netw
leshooting
erences: En the Identityfor EtherNetal value of t
match the ha
e Network Cowork Configu
Pa
g common
Error codes y Object betwt/IP and the he parameteardware dev
onfigurator forator for Eth
age 6 of 16
error code
01:0114, 01ween the .edactual hardw
ers from the vice.
or EtherNet/herNet/IP mu
es:
1:0115, and ds file installware devicedevice, and
/IP, select Tust be online
01:0116, ared in the Ne. To correct
d modify the
ools / Setupe to select th
re caused byetwork t these error.eds file (us
p Parametehis menu opt
y
rs, sing
ers. tion.
2
3
4
5
. Using theand modifread the dGet Attribinformatio
. Respons
number, w
. Responsnumber, w
. Responsnumber, w
e Setup Parafy the .eds fdata, send thbute Singleon.
VendCode
ProdType
ProdCode
MajRev/Mi
se to VendCwhich is byte
se to ProdTywhich is byte
se to ProdCowhich is byte
Pa
ameter tool, ile for the dehe message. Refer to th
Cla
e
nRev
Code: The ree swapped.
ype: The ree swapped.
ode: The ree swapped.
age 7 of 16
read the valevice to matces to the IP Ahe table belo
ass Inst
01
01
01
01
esponse to rExample: 2
esponse to reExample: 0
esponse to AExample: 5
ue of each och the valueAddress of thow for Class
tance Att
01
01
01
01
reading Attri2F00 = Vend
eading Attrib0700 = Prod
Attribute 3 w5104 = Vend
of the 4 paraes read from he device, us, Instance, a
tribute
01
02
03
04
ibute 1 will bdCode 47.
bute 2 will bedType 7.
will be a hexadCode 1105
ameters showthe device.sing a servicand Attribute
be a hexadec
e a hexadec
adecimal .
wn, To
ce of e
cimal
cimal
6
7
[D 8
. ResponsMajRev inMajRev 0
. The Devithe param
Device] VendCo VendNa ProdTyp ProdTyp ProdCod MajRev MinRev ProdNam
. After makNetwork Cnetwork d
se to MajRevn hexadecim02, MinRev 0
ce section ometers, as sh
ode = 47; ame = "OMRpe = 7; peStr = "Gende = 1105; = 2; = 1; me = "ERT1
king the chanConfiguratordiagram. Re
Pa
v/MinRev: Tmal and 2 dig01.
of the .eds filhown below.
RON Corpora
neral Purpos
-MD32SLH-
nges, save tr for EtherNeeload the .ed
age 8 of 16
The responsgits of MinRe
e should be.
ation";
se Discrete I
-1";
he file, deletet/IP, and reds file and co
se to Attributev in hexade
e modified to
/O";
te the devicemove any inomplete the
te 4 will be 2ecimal. Exam
o match the v
e from the pnstances of tconnections
2 digits of mple: 0201
values read
roduct tree ithe device ins.
=
from
in the n the
IO0thcod 1
2
O Size Mism1:031C are
he connectioorrect theseevice, deter
. Using theconsumed101.
. Using theThe Netw
matches: Ecaused by d
on to a devicerrors, read
mine the siz
e Connectiond assembly
e Network Cowork Configu
Pa
Error codes differences ince, comparedd the actual pze from the r
n informationnumbers for
onfigurator forator for Eth
age 9 of 16
01:0109, 01n the producd to the actuproduced anesponse dat
n for the devr the device.
or EtherNet/
herNet/IP mu
1:0127, 01:0ced or consuual assemblynd consumeta, and mod
vice, determi. Shown bel
/IP, select Tust be online
0128 and somumed data sy sizes of thed assembly
dify the conn
ne the produlow are asse
ools / Setupe to select th
metimes size specifiede device. Todata from thection size.
uced and emblies 104
p Parametehis menu opt
d in o he
and
ers. tion.
3
4
. Using thedata, senAttributeAttributein hexaderead.
. Count the
2 to deterhighlight tnumber oAssemblyAssembly
e Setup Parad the messa Single. Us 3. From the
ecimal) and A
e number of rmine the nuthe entire Re
of digits. In ty 104 is 2 byy 101 is 4 by
Pa
ameter tool, ages to the Ise Class 4, Ie example inAssembly 10
digits receivumber of byteesult, and cohe example
ytes long (4 ytes long (8
ge 10 of 16
read the rawP Address oInstance <An step 1, Ass01 (Instance
ved in the Rees. If the reopy / paste above, the digits) and tdigits).
w data for eaof the deviceAssembly Nsembly 104e 65, which
esult, and divsponse in thinto Notepadresponse tothe response
ach assemble, using a seNumber in h
(Instance 6is 101 in hex
vide the numhe Result wind to facilitate
o reading thee to reading
ly. To read tervice of Getexadecima
68, which is xadecimal) a
mber of digitndow is large counting the data from
the data fro
the t l>, 104 are
ts by ge, he
om
5 . Modify the
a. RiEd
b. Mosizdo
e Assembly
ght click on dit.
odify the asszes for the Pownload to th
Pa
Size for the
the device i
sembly sizesPLC / MAC, he PLC / MA
ge 11 of 16
device by:
n the netwo
s as shown. modify the CAC.
rk diagram,
After modifConnection t
and selectin
fying the sizto reflect the
ng Paramete
zes, edit the e new sizes,
er /
Tag and
6
. If the abosometimefile for theIdle HeadHeader mboth connfollowing
a. AdOm
b. AdOm
c. Adfo
If this will beThe fithe PL
ve steps do es 01:031C, e EtherNet/IPder, but the hmismatch counections, so page for an
dd 4 extra bymron PLC / dd 4 extra bymron PLC / dd 4 extra byr the device
does resolve offset by 4 rst 4 bytes wLC / MAC pr
Pa
not resolve try the follow
P device indhardware dould be in thethere are 3 example of
ytes to the PMAC Tag). ytes to the CMAC Tag).ytes to both and the Om
ve the commbytes from t
will be the 32rogram.
ge 12 of 16
error code wing to addricates that t
oes use a 32e produced cdifferent comeach of the
Produced Da
Consumed D
the Producemron PLC / M
munication erthe beginnin2 Bit Run / Id
01:0109, 0ress a specifthe product d2 Bit Run / Idconnection, tmbinations t3 combinati
ata (both the
Data (both th
ed and ConsMAC tags).
rror, the datang of the PLCdle header, a
1:0127, 01:0fic situation does not use
dle Header. the consumeto try. See thions.
e size for the
he size for th
sumed Data
a in the OmrC tag or meand should n
0128 and in which thee a 32 Bit RuThis Run / I
ed connectiohe image on
e device and
he device an
(both the si
ron PLC / MAmory addresnot be used
e .eds un / dle
on, or n the
the
d the
ze
AC ss. in
Page 13 of 16
Invalid PTag NamMAC, doare not m
1
Produced ormes used in t
not have thmarked as ne
. Verify thaa. Exb. Arc. Ar
fo
r Consumedthe Networke same sizeetwork varia
at any Tag Nxist in the PLre marked asre the correcr EtherNet/IP
Pa
d Applicatiok Configuratoe in the PLC bles in the P
ames used LC / MAC, as network vact size in theP (in Bytes).
Examp
Example fro
ge 14 of 16
on Path: Eor for EtherNas in the Ne
PLC / MAC.
in the Netwond are spellariables or Pe PLC to mat.
ple from CX
om Sysmac
Error code 0Net/IP that doetwork Conf
ork Configured correctly
Publish Onlytch the size
X Programm
c Studio
01:0117 mayo not exist infigurator for E
rator for Ethe. . in the Netwo
mer
y be caused n the PLC / EtherNet/IP,
erNet/IP
ork Configur
by
, or
rator
Other erindicate tdoes not
Please c
rror codes: that additioncomply with
ontact Omro
Error codenal modificath the EtherN
on and / or th
Pa
es other thanions to the .e
Net/IP specifi
he EtherNet/
ge 15 of 16
n those desceds file are nication.
/IP device m
cribed in secnecessary, o
manufacturer
ction 3 of thisor that the p
r for addition
s document roduct itself
nal support.
may
Section
1
2
3
4
n 4: Other
. Use Poinnot suppodevices b
. Remove Ebetween t
. Try differe(laptop bacausing in
. If the Statfrom the Eimproper Contact Ofrom the .document
general Et
nt to Point cort Multicast block Multica
Ethernet swthe PLC / MA
ent Ethernetags, etc.). Antermittent c
tus of the coEtherNet/IP implementa
Omron Techeds file, andt.
Pa
therNet/IP t
onnections, connections
ast packets.
itches from tAC and the
t cables. EthAlso, sometimconnections.
onnection asdevice is alwtion of the 3nical Suppod add extra b
ge 16 of 16
troublesho
instead of Ms, or do not i
the network,EtherNet/IP
hernet cablemes cables a
read in secways 0 for a
32 Bit Run / Irt for assistabytes as des
ooting reco
Multicast conimplement th
, and use a cP device.
es degrade ware over crim
ction 1 is 00:0ll bytes receIdle Header ance removinscribed in ste
ommendat
nnections. Shem properl
crossover E
with rough usmped during
0000, but theived, this min the Etherng the Run /ep 6 of secti
tions:
Some devicey, and some
thernet cabl
se in the fielg manufactur
e data receiay indicate
rNet/IP devic/ Idle Headeion 3 of this
es do e IT
e
ld ring,
ived
ce. er
OMRON CANADA, INC. • HEAD OFFICEToronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com
OMRON ELECTRONICS DE MEXICO • HEAD OFFICEMéxico DF • 52.55.59.01.43.00 • 01-800-226-6766 • [email protected]
OMRON ELECTRONICS DE MEXICO • SALES OFFICEApodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • [email protected]
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICESão Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
OMRON ARGENTINA • SALES OFFICECono Sur • 54.11.4783.5300
OMRON CHILE • SALES OFFICESantiago • 56.9.9917.3920
OTHER OMRON LATIN AMERICA SALES54.11.4783.5300
Authorized Distributor:
QSG EIP Error 12/14 Note: Specifications are subject to change. © 2014 Omron Electronics LLC Printed in U.S.A.
Printed on recycled paper.
Automation Control Systems• Machine Automation Controllers (MAC) • Programmable Controllers (PLC) • Operator interfaces (HMI) • Distributed I/O • Software
Drives & Motion Controls • Servo & AC Drives • Motion Controllers & Encoders
Temperature & Process Controllers • Single and Multi-loop Controllers
Sensors & Vision• Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors• Amplified Photomicrosensors • Measurement Sensors• Ultrasonic Sensors • Vision Sensors
Industrial Components • RFID/Code Readers • Relays • Pushbuttons & Indicators• Limit and Basic Switches • Timers • Counters • Metering Devices • Power Supplies
Safety • Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety Controllers • Light Curtains • Safety Relays • Safety Interlock Switches
OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu