eu type-examination certificate uk/0126/0019 revision 34 · 3 the markings and inscriptions shall...
TRANSCRIPT
UK/0126/0019
MI-008
Issue Date: Valid Until:
24 October 2019 04 March 2028
Grégory Glas Technical Manager For and on behalf of the Head of Technical Services
0135 NMO I Stanton Avenue I Teddington I TW11 OJZ I United Kingdom
Tel +44 (0) 20 8943 7272 I Fax +44 (0) 20 8943 7270 I Web www.gov.uk/government/organisations/office-for-product-safety-and-standards NMO is part of the Office for Product Safety and Standards within the Department for Business, Energy & Industrial Strategy
EU type-examination certificate UK/0126/0019 Revision 34 Issued by:
NMO Notified Body Number 0126
In accordance with the requirements of the Measuring Instruments Regulations 2016 (S.I. 2016 No. 1153) which implement, in the United Kingdom, Council Directive 2014/32/EU, this EU-type examination certificate has been issued to:
NINGBO GREAT WALL PRECISION INDUSTRIAL CO., LTD (Konfoong Group Ltd, Hong Kong) 1 Konfoong Road Yangming Technology Industrial Park Yuyao City Zhejiang Province China 315400
in respect of: Material measure of length accuracy class: II nominal lengths and widths: 2 m x 12.5 mm
Additional models, lengths and widths up to 50 m x 15 mm are described in section 7 of the descriptive annex to this certificate.
The necessary data (principal characteristics, alterations, securing, functioning etc) for identification purposes, and conditions (when applicable), are set out in the descriptive annex to this certificate.
This revision replaces previous versions of the certificate.
2
Descriptive Annex
1 REGULATIONS
The measuring instrument in respect of which this EU type examination certificate has been issued is subject to the provisions and requirements of the Measuring Instruments Regulations 2016 (S.I. 2016 No. 1153) which implement, in the United Kingdom, Council Directive 2014/32/EU.
2 DESCRIPTION OF THE PATTERN
The pattern is a small composite measure, which has a dual graduated blade. The blade is 2 m long, 12.5 mm wide, made of steel with a sliding hook at the free end. It has black and red markings on a white, or yellow, background protected by a clear film. The blade is graduated in millimetres throughout on both edges; half-centimetres are also marked. The centimetre and the decimetre intervals are numbered consecutively throughout.
3 TECHNICAL DATA
3.1 (a) Accuracy class: II (b) Nominal length: 2 m (c) Scale interval: 1 mm
4 INSCRIPTIONS
The following inscriptions are marked at the beginning of the blade on the front face:
(a) Nominal length: 2 m (b) Manufacturer's identification: “GREAT WALL” and/or logo (c) Class of accuracy: II (d) EU type examination certificate: UK/0126/0019
5 APPROVAL CONDITIONS
The certificate is issued subject to the following conditions.
5.1 Legends and inscriptions
5.1.1 The following markings and inscriptions are durably and legibly marked onto the blade of the tape measure:
- CE marking - Supplementary metrology marking - Manufacturer’s name, registered trade name or registered trade mark and
postal address - Identification number of the notified body involved in the production control
phase - Information in respect of its accuracy
and, when applicable:
- Information in respect of the conditions of use - Measuring capacity - Identity marking (a type, batch or serial number or other element allowing
their identification) - Number of the EU-type examination certificate - Information whether or not additional devices providing metrological results
comply with the provisions of Directive 2014/32/EU on legal metrological control
3
The markings and inscriptions shall fulfil the requirements of Article 8, Article 21, Article 22 and Point 9 of Annex I of Directive 2014/32/EU.
5.1.2 The model of the tape measure cases are identified by the series number. The following codes may follow the case series number to denote the associated blade width:
• W 16 mm
• E 19 mm
• X 25 mm
• Y 27 mm
• F 32 mm
6 LOCATION OF MARKS
6.1 The inscription in section 4 together with the ‘CE’ marking, supplementary metrology marking and notified body number are printed on the blade near the beginning. An example of the markings is shown in Figure 1.
7 ALTERNATIVES
7.1 Having alternative models of steel tape measure blade as described in Table 1 below.
Accuracy class
Nominal length
(m)
Nominal widths
(mm)
Accuracy class
Nominal length
(m)
Nominal widths
(mm)
II 1 6 II 5.5 16, 19, 25, 27
II 2 6, 12.5, 16 II 6 19, 25
II 3 12.5, 16, 19 II 7.5 25, 27
II 3.5 12.5, 16, 19 II 8 25, 27, 32
II 5 12.5, 16, 19, 25, 27
II 10 10, 12.5, 25, 27,
32
II 20 10, 12.5 II 30 10, 12.5, 32
II 50 10, 12.5, 32
Table 1
7.1.1 The blade may be enclosed in a plastic case which is identified by the model series number, e.g. GW 203 - GW (Great Wall), -2 (nominal length), 03 (case series number). The following table lists those cases which are marked with a case dimension for making internal measurements.
7.1.1.1 Having the case series listed in Table 2 without a case dimension marking, for making internal measurements.
Accuracy class
Case series
Case marking
(mm)
Accuracy class
Case series
Case marking
(mm)
II 03 66 II 37 75
II 03 72 II 53 60
II 05 57 II 53 70
II 05 63 II 53 82
II 09 64 II 53 87
II 09 70 II 56 56
4
II 12 63 II 56 73
II 12 66 II 56 85
II 12 72 II 58 85
II 29 80 II 58 86
II 35 70 II 75 60
II 37 63 II 75 70
Table 2
7.1.2 The following case/reel series are not marked with a case dimension for making internal measurements*. The case/reel may be in any colour.
Series 01 Series 02 Series 10 Series 11
Series 16 Series 18 Series 28 Series 42
Series 39 Series 46 Series 55 Series 66
Series 61 Series 68 Series 69 Series 77
Series 78 Series 80 Series 81 Series 85
Series 89 Series 92 Series 96 Series 99
Series A1 Series A2 Series A8 Series A15
Series A18 Series A19 Series J7 Series J8
Series J11 Series J13 Series J15J Series J18
Series A25 Series 62 Series 31 Series 35*
Series 11-1 Series A44 Series 15 Series 78-1
Series J19 Series 08-1 Series YJ-09 Series 43
Series 74 Series 83 Series 98 Series 8
Series 1 Series 85 Series 3 Series 5
Series 71 Series 72 Series A60 Series A61
Series 45 Series 73 Series 21 Series 23
Series A50 Series A51 Series A52 Series A53
Series A54 Series A50W Series A58W Series A57
Table 3
* Note: Case series 35 may have Imperial graduations marked on the lower edge. These have been taken in to consideration as ‘supplementary indications’. Approval under this Certification is limited to the metric graduations only.
7.1.3 The case may be fitted with any of the following:
• blade lock,
• belt clip
• wrist / carrying strap.
7.1.4 The blade may be fitted with a magnet on the end hook. The magnet should only be used as a “reference point” for the blade when a measurement is made with the blade “under compression”, and not be used as a “reference point” for the blade when a measurement is made with the blade “under tension”.
7.1.5 The case, which may be any colour, may be marked with a case dimension, as indicated in table 2, for making internal measurements. The strap should not interfere with the measurement when making internal dimension measurements.
5
7.1.6 The case may be fitted with a rubber sleeve / grip.
7.1.7 The belt clip shall not obscure case dimension markings.
7.1.8 Having the following markings, which are in addition to the manufacturer’s identification of “GREAT WALL” and/or logo.
• METLAND • JEWSON
• ALFA • WOMAX
• WALTER • KARAN
• ROTHENBERGER • VALEX
• RAAB KARCHER • AKIFIX
• ALYCO • TOPEX
• CONTINENTAL • NEO TOOLS
• TORNEIRO • TOP TOOLS
• GOOD YEARS • SKIL
• NOVIPro • ANT
• SIBA • COSMOS
• HODARA (Brand name: Hu firma) • UGR • ADW • SKILLS • TOP CRAFT • VIP-TEC • WISVO • NoRa • BRüDER MANNESMANN • GO/ON • KLY-TEK • ORIENT • BLACK&DECKER • FORTE • SPEAR & JACKSON ECLIPSE • JUNIOR • MEISTER • ERATOOL • ÌNANÇ • TECHNO TOOLS • YILTEK • ZJD • HOLDON • BOSCH • ETVAL • Tchokko! • Hornbach Baumarkt AG • SENUKU PREKYBOS CENTRAS UAB • Metrica or RING • Beta • ZiMAK • ayce • KRL • PROTECO • PIONER • DURO • GISS • KNITEX • M.Ç. Extra • HAMDi KÜÇÜK • KUPA • ARK • CMC • KENSTON • MAYOTA • AmazonBasics • HAUS or HALT • PRIMASTER or Trendline • toom or b1 • CON:P, or Connex, or Werkzeyt, or
meister, or , or meistercraft
7.1.9 Having an alternative model of 5 m x 19 mm, which has a dual graduated blade. The blade is graduated in millimetres throughout on the upper edge, and Imperial graduations on the lower edge. The imperial graduations have been taken in to consideration as ‘supplementary indications’. Approval under this Certification is limited to the metric graduations only.
6
7.1.10 Having the following alternative model identifications for the additional markings specified:
WISVO Hu firma SKIL
44.025802 HF775 F0150505AA
44.035835 HF776 F0150508AA
44.055805 HF777
44.085808 HF778
44.105810
Table 4
WISVO model 44.085808 is marked with a case dimension of 85 mm.
Hu firma model HF778 may be marked with a case dimension of 85 mm.
7.1.11 Having the following alternative model identifications for the additional markings specified:
VIP-TEC
VT300316 VT310316 VT3201013 VT3301013
VT300516 VT310519 VT3202013 VT3302013
VT300519 VT310525 VT3203013
VT300525 VT3205013
Table 5
7.1.12 Having alternative models which have a dual graduated blade. The blade is graduated in millimetres throughout on the lower edge, and Imperial graduations on the upper edge. The imperial graduations have been taken in to consideration as ‘supplementary indications’. Approval under this Certification is limited to the metric graduations only.
Accuracy class Nominal length Nominal widths(mm)
II 3m / 10ft 16
II 8m / 26ft 25
Table 6
7.1.13 Having the following alternative model identifications for the additional markings specified:
MEISTER,B1, MEROX,TOOM
6532300 6530008 6509000 6508000
6532308 6530200 6531000 6508010
6532500 6530206 6531008 6530100
6532508 6530208 6571006 6530106
6532800 6530250 6571008 6530108
6532808 6530300 6572006
6530000 6530350 6572008
6530006 6530358 6575010
Table 7
7
7.1.14 Having the following alternative model identifications for the additional markings specified:
Great Wall KLY-TEK Great Wall KLY-TEK
JGW-208 AK108 JGW-2011 AK152
JGW-308 AK109 JGW-3011 AK153
JGW-508 AK110 JGW-5011 AK154
GWF-1016 AK148 GWF-3016 AK150
GWF-2016 AK149 GWF-5016 AK151
Table 8
7.1.15 Having the following alternative model identifications for the additional markings specified:
Great Wall ORIENT Great Wall ORIENT
GW-269 AK111 JGWF-301 AK132
GW-269W AK112 JGWF-501 AK133
GW-369 AK113 JGW-208 AK134
GW-369W AK114 JGW-308 AK135
GW-569W AK115 JGW-508 AK136
GW-569E AK116 GW-1085X AK137
GW-569X AK117 GW-285 AK138
GW-7H69X AK118 GW-285W AK139
GW-1069X AK119 GW-385 AK140
GW-246 AK120 GW-385W AK141
GW-246W AK121 GW-585E AK142
GW-346 AK122 GW-585X AK143
GW-346W AK123 GW-7H85X AK144
GW-346E AK124 JGWF-203 AK145
GW-546W AK125 JGWF-303 AK146
GW-546E AK126 JGWF-503 AK147
GW-546X AK127 JGW-105 AK155
GW-846X AK128 JGW-205 AK156
GW-1046X AK129 JGW-305 AK157
JGWF-101 AK130 JGW-505 AK158
JGWF-201 AK131
Table 9
8
7.1.16 Having the following alternative model identifications for the additional markings specified:
Great Wall Tchokko!
GW-539X AT-5073
Table 10
7.1.17 Having the following alternative model identifications for the additional markings specified:
Great Wall Hornbach Baumarkt AG
GW-346W 8214760
GW-546E 8214761
GW846X 8214762
GWF-3016 8214759
Table 11
7.1.18 Having the following alternative model identifications for the additional markings specified:
Great Wall Metrica or RING
JGWF-501 40235
Table 12
7.1.19 Having the following blades fitted to a case style 93 or J20, bearing no dimensions:
Accuracy class Nominal length (m) Nominal widths (mm)
II 10 10, 12.5, 25, 32
II 20 10, 12.5
II 30 10, 12.5, 32
II 50 10, 12.5, 32
Table 13
7.1.20 Having the following blades fitted to a case style A62, A63 or A65, bearing no dimensions:
Accuracy class Nominal length (m) Nominal widths (mm)
II 3 12.5, 16, 19
II 3.5 12.5, 16, 19
II 5 12.5, 16, 19, 25
II 5.5 16, 19, 25
II 6 19, 25
II 7.5 25
II 8 25, 32
II 10 10, 12.5, 25, 32
Table 14
7.1.21 Having the following alternative model identifications for the additional markings specified:
9
Great Wall KRL
GW-366W KRL-366W
GW-566E KRL-566E
GW-566X KRL-566X
GW-1066X KRL-1066X
Table 15
7.2 Having alternative models of tape measure blade as described in the table below, manufactured from fibreglass, which can be identified by the model series number, e.g. GWF 3016 - GW (Great Wall), F – fibreglass,-30 (nominal length), 16 (case series number).The blade may be enclosed in a close case or open reel.
Accuracy class Nominal length (m) Nominal widths (mm)
III 10 13, 15
III 15 13, 15
III 20 13, 15
III 30 13, 15
III 50 13, 15
Table 16
7.2.1 The centimetre intervals on the blade are numbered consecutively from 1 to 9 for each decimetre; this pattern is repeated throughout the blade. Half-decimetres are marked with an arrow. The number of metres is stated in red. The scale markings are in black on a white background. The blade is terminated by a metal ring, which is attached by means of a reinforcing plastic strip approximately 6 cm long. The zero mark is offset approximately 8 cm inwards from the end of the blade or the graduation starts from the attachment ring.
7.2.2 The blade may be fitted with a plastic ring and metal end-hook attached to it by means of a plastic clamp that obscures up to the first 30 mm of the blade. The end-hook may be laid flat against the plastic clamp when not in use. The first 195 mm of the blade may be covered by a yellow, transparent plastic reinforcing strip.
7.2.3 The blade may be fitted to a case type J20 (Figure 56).
7.3 Having an alternative style of hook fitted to the end of the tape measure blade, as shown in figure 15.
7.4 Having alternative models of tape measure blade as described in the table below, see figure 55, manufactured from fibreglass, which can be identified by the model series number, e.g. GWF 3XX - GW (Great Wall), F – fibreglass,-3 (nominal length), The blade has no case or open reel. They have the additional manufacture’s mark of the Post Office:
Accuracy class Nominal length (m) Nominal widths (mm)
III 3 20
Table 17
10
7.5 The scale ends at the nominal length, then there is a blank space where the manufacturer and importer address are printed according to Directive 2014/32/EU.
7.6 Having the following alternative model identifications for the additional markings specified:
Great Wall ETVAL Nominal Length (m) Nominal Width (mm)
GW-353W STE10041 3 16
GW-553W STE10042 5 16
GW-553E STE10043 5 19
GW-553X STE10044 5 25
GW-853X STE10045 8 25
GW-1053X STE10046 10 25
Table 18
7.7 Having the following alternative model identifications for the additional markings specified:
Great Wall GISS Nominal Length (m) Nominal Width (mm)
GW-372W 867688 3 16
GW-572E 867689 5 19
GW-872X 867690 8 25
Table 19
7.8 Having the following blades fitted to case style 25 (Figure 66), bearing no case dimensions:
Accuracy class Nominal length (m) Nominal widths (mm)
II 10 10, 12.5, 25, 32
II 20 10, 12.5
II 30 10, 12.5, 32
II 50 10, 12.5, 32
Table 20
7.9 Having the following models, and alternative identifications for the additional markings specified, fitted to case style A57 (Figure 65) bearing no case dimensions:
GREAT WALL BOSCH Nominal length
(m) Nominal width
(mm) Accuracy
class
GW-5A57Y 1600A016LD 5 27 II
GW-8A57Y 1600A016LE 8 27 II
Table 21
7.10 Having the following case/reel series, which are not marked with a case dimension for making internal measurements, the case/reel series may be in any colour.
GW-L107S Series 09 Series 89-1 Series 85-1
Series B3-1 Series B3-2 Series A74 Series A75
GW-D040 Series 07 Series 21
Table 22 Any accessory functional modules (listed but not limited to the following: level bubble, calculator and solar power module) are out of the scope of this certificate.
11
7.11 Having the following alternative model identifications for the additional markings specified:
Great Wall Model name Meister model
name LOGO
Series 89-1
2214980 b1
8971430 Meister
8973630 Meister
8973710 Meister
CP566043 Werkzeyt
CP566044 conmetall
CP566060 conmetall
CP566073 Werkzeyt
Series 85-1 2216333 toom
8973350 Meister
Series 02
5970089 Primaster
8060083 toom
COX566101 CONNEX
5970103 Primaster
1332182 toom
1358922 b1
4920221 Meister
7249100 toom
8971440 Meister
8971460 Meister
8971470 Meister
8971480 Meister
8973740 Meister
COX566131 CONNEX
COX566229 CONNEX
8973750 Meister
8060083 toom
8355680 toom
8059579 toom
8337078 toom
5970099 Primaster
5970023 Trendline
Series B3-2
1992927 toom
6509150 Meistercraft
6509100 meistercraft
Steel long tape Series 07
6571008 toom
6572000 Meister
6572008 toom
Steel long tape Series 21 6576408 b1
6576400 Meister
Table 23
12
8 ILLUSTRATIONS
Figure 1 The pattern Figure 2 Series 03 case
Figure 3 Series 05 case Figure 4 Series 09 case
Figure 5 Series 12 case Figure 6 Series 29 case
Figure 7 Series 37 case Figure 8 Series 53 case
Figure 9 Series 56 case Figure 10 Series 58 case
Figure 11 Series 75 case Figure 12 Series HF 77x
Figure 13 Series A18 GW8A18X case Figure 14 Dual graduated blade model.
Figure 15 Alternative model of hook Figure 16 Series JGW-Y
Figure 17 Series J5 Figure 18 Series 78 case
Figure 19 Series 02 case Figure 20 Case style – Series 16
Figure 21 Case style – Series 11 Figure 22 Case style – Series A25
Figure 23 Case style – Series 62 Figure 24 Case style – Series 31
Figure 25 Case style – Series 35 Figure 26 Case style – Series 11-1
Figure 27 Case style – Series A44 Figure 28 Case style – Series 15
Figure 29 Case style – Series 78-1 Figure 30 Case style – Series J19
Figure 31 Case style – Series 08-1 Figure 32 Case style – Series YJ-09
Figure 33 Example of dual graduated blade design (metric lower scale)
Figure 34 Case style - Series A1 Figure 35 Case style - Series 43
Figure 36 Case style - Series 74 Figure 37 Case style - Series 83
Figure 38 Case style - Series 98 Figure 39 Case style - Series 8
Figure 40 Case style - Series 1 Figure 41 Case style - Series 85
Figure 42 Case Style - Series 3 Figure 43 Case Style - Series 5
Figure 44 Case Style - Series 69 Figure 45 Case Style - Series 46
Figure 46 Case Style - Series 39 Figure 47 Case Style - Series 71
Figure 48 Case Style - Series 72 Figure 49 Case Style - Series A60
Figure 50 Case Style - Series A61 Figure 51 Case Style - Series 45
Figure 52 Case Style - Series 73 Figure 53 Case Style - Series 23
Figure 54 Case Style - Series 21 Figure 55 3 m fibreglass blade
Figure 56 Case Style - Series 93 Figure 57 Case Style - Series J20
Figure 58 Case Style - Series J22 Figure 59 Case Styles A62/A63/A65
Figure 60 Case Style 09 (alternative) Figure 61 Case Styles A50, A51, A52, A53 & A54
Figure 62 BOSCH Figure 63 Case Style - Series A50W
Figure 64 Case Style - Series A58W Figure 65 Case Style - Series A57
Figure 66 Case Style - Series 25 Figure 67 Case Style - Series GW-L107S
Figure 68 Case Style - Series 09 Figure 69 Case Style - Series 89-1
Figure 70 Case Style - Series 85-1 Figure 71 Case Style - Series B3-1
Figure 72 Case Style - Series B3-2 Figure 73 Case Style - Series A74
Figure 74 Case Style - Series A75 Figure 75 Case Style - Series GW-D040
Figure 76 Case Style - Series 07 Figure 77 Case Style - Series 21
13
9 CERTIFICATE HISTORY
ISSUE NO. DATE DESCRIPTION
UK/0126/0019 20 August 2007 Type examination certificate first issued.
UK/0126/0019 Rev 1
05 November 2007 Revision 1 issued.
Modification to Section 7.1.8: i) “Having the following alternative manufacturer’s identification” is changed to “Having the manufacturer’s following alternative identification” ii) Addition of manufacturer’s alternative identification “COSMOS
UK/0126/0019 Rev 2
14 January 2008 Revision 2 issued.
Modification to Section 7.1.8: i) “Having the manufacturer’s following
alternative identification” is changed to
“Having the following markings, which are in addition to the manufacturer’s identification of “GREAT WALL” and/or logo”.
ii) Addition of manufacturer’s alternative identification ADW.
Modification to Section 7.1.10: “Having the following alternative model identifications with the following manufacturer’s alternative identification:”
is changed to “Having the following alternative model identifications for the additional markings specified:”
Figure 13 Dual graduated blade model is renumbered as Figure 14
New Figure 13 Case style – A18 GW8A18X series inserted
UK/0126/0019 Rev 3
13 May 2008 Revision 3 issued.
Addition of section 7.3 Alternative style of hook, and Figure 15
UK/0126/0019 Rev 4
4 September 2008 Revision 4 issued.
Addition of the following case series to table 3: 01, 02, 10, 11, 16, 18, 28, A1, A2, A8, A15, A18, A19, J7, J8, J11, J13, J15 and J18. Table rearranged in numerical order.
UK/0126/0019 Rev 5
12 March 2009 Revision 5 issued.
Modification to Section 7.1.8:
Addition of manufacturer’s alternative identifications:
i) UGR
ii) TOP CRAFT
iii) SKILLS
14
UK/0126/0019 Rev 6
11 June 2009 Revision 6 issued.
Addition of Section 7.1.1.1
Modification to Section 7.1.8 to include
Addition of manufacturer’s alternative identification:
i) VIP-TEC
Which is the identification of :
ARMETAL VE DOVME EL ALETLERI SAN.VE TIC.A.S
BAGLAR ICI CAD.NO.:85 K.1/2 FIRUZKOY/AVCILAR ISTANBUL TURKEY
Addition of Section 7.1.11
UK/0126/0019 Rev 7
12 November 2009 Revision 7 issued.
Modification to Section 7.1.2:
Addition of Series 78 case
Addition of Figures 16, 17 & 18
UK/0126/0019 Rev 8
24 March 2010 Revision 8 issued.
Modification to Section 7.1.8:
Addition of manufacturer’s alternative identification “NoRa”
UK/0126/0019 Rev 9
13 April 2010 Revision 9 issued.
Modification to Section 7.1.8:
Addition of manufacturer’s alternative identification “BRüDER MANNESMANN” and
brand
UK/0126/0019 Rev 10
07 January 2011 Revision 10 issued.
Modification to layout of Table 1 in section 7.1.
Section 7.1 - Addition of models: 3.5m*12.5mm; 3.5m*16mm; 3.5m*19mm; 5.5m*16mm; 5.5m*19mm; 5.5m*25mm; 7.5m*25mm to
Modification to layout of Table 2 in section 7.1.1.
Section 7.2 addition to include:
• identification by the model series number
• 15m fibreglass tape measure.
Addition of Figures 19, 20 & 21
UK/0126/0019 Rev 11
26 January 2011 Revision 11 issued.
Modification to Section 7.1.8:
Addition of manufacturer’s alternative identification;
GO/ON
15
UK/0126/0019 Rev 12
07 July 2011 Revision 12 issued.
Modification to Section 7.1.8:
Addition of a manufacturer’s two alternative identifications;
i) KLY-TEK
ii) ORIENT
Which is the identification of:
AKDEMIR MAKINA PAZARLAMA SANAYI VE DIS TICARET LTD.STI. YESILBAYIR MAH. SIMSIR SOK. NO:5 HADIMKOY/ISTANBUL TURKEY
UK/0126/0019 Rev 13
23 March 2012 Revision 13 issued.
Addition of a manufacturer’s alternative identification:
Addition of Figure 22
UK/0126/0019 Rev 14
28 March 2012 Revision 14 issued.
Addition of the following case series in 7.1.2 Table 3, and Figures 23 - 32:
series 62, series 31, series 35, series 11-1 series A44, series 15, series 78-1, series J19, series 08-1, series YJ-09
UK/0126/0019 Rev 15
01 February 2013 Revision 15 issued.
Addition of 7.1.12 for two dual marked blades (metric lower scale)
Addition of figure 33
Alternative logo in addition to manufacturer logo in section 7.1.8
for::Neill Tools Ltd. Atlas way, Atlas North, Sheffield England.S4 7QQ.
Alternative logo in addition to manufacturer logo in section 7.1.8.
With item numbers in section 7.1.13
Alternative logo in addition to manufacturer logo in section 7.1.8
Addition of section 7.4, class I steel blades.
Addition of Fig 34. Example of class I blade.
Addition of Table numbers to sections:
7.1.10; 7.1.11; 7.1.12; 7.1.13. 7.2 & 7.4
16
UK/0126/0019 Rev 16
23 May 2013 Revision 16 issued.
Deletion of section 7.4, class I steel blades.
Deletion of Fig 34. Example of class I blade.
Alternative logos which are in addition to manufacturer logo in section 7.1.8.
a) Which is the identification of: SGT SANAYI VE TICARI URUNLER DIS TICARET A.S. Dokuz Eylul Mah.Kahramanlar Caddesi No:39 Gaziemir-IZMIR /TURKEY.
b) Which is the identification of: ERA HIRDAVAT LTD.STI.
Nato Yolu Caddesi No.71 Y.Dudullu
Umraniye-ISTANBUL / TURKEY
c) & Which are the identification of: INANC TRAFO MAK.SAN.-INANC KOSE : Yavuz Sultan Selim Cad.No:36/D Camdibi-Izmir/TURKEY
d) Which is the identification of: YILDIRIM TEKNIK YAPI MALZ.SAN.VE TIC.LTD STI
VE TİCARET LTD.ŞTİ, Demirciler sitesi 6.yol no.41, Zeytınburnu, Istanbul,TURKEY.
e)
f)
UK/0126/0019 Rev 17
23 July 2013 Revision 17 issued.
Alternative logo which is in addition to manufacturer logo in section 7.1.8.
Case series A1 image added as fig. 34
Addition of the following case series 43, 74, 83, and 98 into section 7.1.2, table 3. Also added to figures list.
Figure 24 - case style typing error changed from series 62 to series 31.
17
UK/0126/0019 Rev 18
19 March 2014 Revision 18 issued.
Addition of case/reel series numbers (8,1, 85, 3 and 5) in section 7.1.2 - table 3
Addition of section 7.1.14 and table 8 - alternative model numbers for KLY-TEK
Addition of section 7.1.15 and table 9 - alternative model numbers for ORIENT
Addition of figures 39 - 45, case/reel styles.
Renumbered table 9 in section 7.2 to table 10.
UK/0126/0019 Rev 19
12 May 2014 Revision 19 issued.
Alternative logo which is in addition to manufacturer logo in section 7.1.8. Which is the identification of:
Sarac Teknik Hirdavat Insaat San Ve Tic Ltd. Sti. Orta Mahalle Burgaz Caddesi No: 11 Tuzla Istanbul Turkey.
UK/0126/0019 Rev 20
02 September 2014 Revision 20 issued
Reference to section 7 added to page 1.
Addition of:
• manufacturer’s alternative
identification: Tchokko! , which is in addition to manufacturer logo, in section 7.1.8.
Which is the identification of : ANATECH DIS TIC.A.S. Buyukdere Cd. No:163 Kat:7 Sisli/Istanbul-Turkey 34394
• section 7.1.16
Renumbering of the Table (10) in section 7.2 to Table 11.
UK/0126/0019 Rev 21
09 January 2015 Revision 21 issued, Addition of:
• model series 71 and 72 into section 7.1.2 and figures 47 and 48.
• Manufacturer’s alternative identification:
Hornbach Baumarkt AG, which is in addition to the manufacturer logo, in section 7.1.8.
• Manufacturer’s alternative identification:
SENUKU PREKYBOS CENTRAS UAB, which is in addition to the manufacturer logo, in section 7.1.8.
• 7.1.17 including table 11
Renumbering of Table 11 in section 7.2 to Table 12.
18
UK/0126/0019 Rev 22
02 June 2015 Revision 22 issued
Modification of text on page 1 regarding Additional models.
Addition of:
• model series A60, A61, 45, 73, 21 and 23 into section 7.1.2, and figures 49 - 54.
Amendment to Section 7.1.8, YILTEC is changed to YILTEK.
UK/0126/0019 Rev 23
23 June 2016 Revision 23 issued
Section 7.4 and associated figure 55 added
UK/0126/0019 Rev 24
9 September 2016 Revision 24 issued
Alternative logos which are in addition to manufacturer logo in section 7.1.8.
Which is the identification of: Metrica spa- Italy Via Grandi 18 - 20097 S.Donat
Which is the identification of: Beta Utensili S.P.A. Via Volta 18 20845 Sovico (MB) - Italy
Addition of sections 7.1.18 and 7.4.
Section 7.2.1, alternative graduation starts at ring.
UK/0126/0019 Rev 25
30 November 2016 Revision 25 issued
Sections 7.1.19, 7.1.20 and 7.2.3 added.
Section 7.1.8: Alternative logos, which are in addition to the manufacturer logo;
Which is the identification of:
GUL-ZAN HIRDAVAT ITH.IHR.DAH.TICARET CELIKYURT MAH. DUBAII IS MERKEZI NO.01 NUSAYBIN/TURKEY.
Which is the identification of: JUMBO-Markt AG Industriestrasse 34 CH-8305 Dietlikon,Switzerland.
Error in section 7.3 corrected, text as in Revision 23 included for section 7.4 and section 7.4 (Revision 24) re-numbered as 7.5
Section 7.4: Table 13 is renumbered to Table 16. Alternative case style 09 added (Figure 60).
19
UK/0126/0019 Rev 26
09 March 2017 Revision 26 issued Modification to Section 7.1.8:
Addition of the following markings which are in addition to manufacturer logo:
KRL, which is the identification of:
KAROGLU MUHENDISLIK YAPI SAN.DIS.TICARET LTD.STI. Mahmut Bey Mah.Isdoc Toptancilar Car.25 Ada No.81/83, Bagcilar - Istanbul – TURKIYE
PROTECO, which is identification of: PROTECO Naradi s.r.o Radlicka 2487/99 150 00Praha 5-Smichov
Addition of section 7.1.21. Subsequent table numbers are amended accordingly
UK/0126/0019 Rev 27
01 June 2017 Revision 27 issued
Addition of Section 7.6
Wording in section 5.1.1 amended align with the text in the Directive.
UK/0126/0019 Rev 28
26 July 2017 Revision 28 issued
Addition:
Section 7.1.2 , case Series A50, Series A51, Series A52, Series A53 & Series A54.
Section 7.1.8 Alternative logo markings, which are in addition to the manufacturer logo;
and is the identification of:
OMRAN DEMIR, SELAHADDIN EYYUBI MAH. SEHER SK./38 MARDIN/NUSAYBIN 052, TURKIYE
and
ZIMAK EL ALETLERI/MAZHAR ZIYANEK MAHMUT BEY MAH.ISTOC TOPTANCILAR CARSISI 28 YOL SOKAK 25 A DA NO.173-75 BAGCILAR/ISTANBUL
TURKIYE
which is the identification of:
VARO-Vic. Van Rompuy n.v JOSEPH VAN INSTRAAT 9 2500 LIER (BELGIUM)
Figures 61 & 62
Amendment to list in Section 8 ILLUSTRATIONS
20
UK/0126/0019 Rev 29
10 October 2017 Revision 29 issued
Addition of:
Section 7.1.8 Alternative logo, which is in addition to the manufacturer logo;
and is the identification of:
IMPORTE POUR IPH Brands, 31 rue de la baume, 75008, PARIS, France.
Section 7.7 Alternative model identifications
UK/0126/0019 Rev 30
05 March 2018 Addition to:
• Table 3, for Case Series A50W, A58W and A57.
• Section 7.1.8
Alternative logo markings, which are in addition to the manufacturer logo,
, which is the identification of:
AKGUL ITHALAT RIDVAN AKA
MAHMUTBEY MAH.2445 SK.NO:23, BAGCILAR/ISTANBUL
and
which is the identification of:
MUHITTIN CAKIROGLU HIRD.INS.GIDA.TUR.SAN.TIC.LTD.STI
KARACAOGLAN MAH.6166 SOK NO:23/B, ISIKENT/BORNOVA/IZMIR,TURKEY
• Figures 63 -65
• Section 7.8 and Figure 66.
Certificate renewed for further 10 years.
UK/0126/0019 Rev 31
20 March 2018 New pictures. Added to Figure 65
Section 7.1.8 added:
Alternative logo markings, which are in addition to the manufacturer logo,
or
which are the identifications of:
HAMDİ KÜÇÜK ÇELİK MAKİNA TİC. VE SAN. A.Ş. , 1145/10-11 SOKAK NO: 17-18 Yenisehir IZMIR Turkey.
UK/0126/0019 Rev 32
01 June 2018 • Additional manufacturer logo "HORNBACH" in Revision 21 of the History table.
• Additional manufacturer logo "FASTMAX" in Revision 31 of the History table.
21
UK/0126/0019 Rev 33
19 July 2018 • Section 5.1.2, addition of model code Y;
• Section 7.1, addition of models with nominal width 27mm;
• Section 7.1.8, addition of alternative logo marking, which is in addition to the manufacturer logo;
i).
which is the identification of:
KUPA HIRDAVAT
Add: SELIM AKDENIZ ISTOC SANAYI SITESI 26 ADA NO:122-124 BAGCILAR/ISTANBUL
ii).
which is the identification of:
ZIMAK EL ALETLERI
The address is updated from Revision 25 to new address:
MAHMUT BEY MAH.ISTOC TOPTANCILAR CARSISI 28 YOL SOKAK 25 ADA NO.173-175 BAGCILAR/ISTANBUL
iii).
which is the identification of:
OZKAYA HIRDAVAT TICARET TOPTAN-PERAKENDE HIRDAVAT
Add: KOCAVEZIR MAH.KOCAVEZIR IS MRK.UST ZEMIN KAT NO:192/ADANA BESOCAK
iv).
which is the identification of:
CMC EL ALETLERI HIRDAVAT ELEK YAPAY CICEK TAR URN. INS. TAAH. ITH. IHR. SAN.VE.TIC.LTD. STI
Add: YESILOBA MAH.SEYHAN TIC.MRK B BLOK NO:16 SEYHAN/ADANA
• Addition of Section 7.9 and Table 21.
22
UK/0126/0019 Rev 34
24 October 2019 Addition to:
• Section 7.1.8: addition of alternative logo markings, which is in addition to the manufacturer logo;
i)
which is the identification of: UNIFIRST Add: ZI LA BORIE 2, 43120 MONISTROL SUR LOIRE, FRANCE
ii)
which is the identification of: STARTRADE ITALY SRL, Add: VIA VINCENZO TINEO 97,00172, ROMA, Italy.
iii)
which is the identification of: Amazon EU SARL, Add: Niederiassung Deutschland
iv)
which is the identification of: UAB Kesko Senukai Lithuania, Add:Islandijos pl. 32 B, 51500 Kaunas, Lithuania
v)
which are the identifications of:
vi) or
which are the identifications of:
23
vii) , or ,
or ,
or , or
, or
which are the identifications of
• Sections 7.10 and 7.11
• Figures 67 – 77.
24
Figure 1 Example of the pattern
Figure 2 Case style – 03 series
Figure 3 Case style – 05 series
Figure 4 Case style – 09 series
Figure 5 Case style – 12 series
Figure 6 Case style – 29 series
Figure 7 Case style – 37 series
25
Figure 8 Case style – 53 series
Figure 9 Case style – 56 series
Figure 10 Case style – 58 series
Figure 11 Case style – 75 series
Figure 12 Case style – HF 77x series Figure 13 Case style – A18 GW8A18X series
Figure 14 Dual graduated blade model
Figure 15 Alternative style of hook
26
Figure 16 Case style – Series JGW-Y
Figure 17 Case style – Series J5
Figure 18 Case style – Series78
27
Figure 19 Case style – Series 02
Figure 20 Case style – Series 16
Figure 21 Case style – Series 11
Figure 22 Case style – Series A25
28
Figure 23 Case style –Series 62
Figure 24 Case style – Series 31
Figure 25 Case style –Series 35
Figure 26 Case style –Series 11-1
Figure 27 Case style –Series A44 Figure 28 Case style –Series 15
29
Figure 29 Case style –Series 78-1
Figure 30 Case style –Series J19
Figure 31 Case style –Series 08-1
Figure 32 Case style –Series YJ-09
Figure 33 Example of dual blade design (metric lower scale)
Figure 34 Case style - Series A1 Figure 35 Case style - Series 43
30
Figure 36 Case style - Series 74 Figure 37 Case style - Series 83
Figure 38 Case style - Series 98
Figure 39 Case style - Series 8
31
Figure 40 Case style - Series 1 Figure 41 Case style - Series 85
Figure 42 Case style - Series 3 Figure 43 Case style - Series 5
32
Figure 44 Case style - Series 69 Figure 45 Case style - Series 46
Figure 46 Case style - Series 39
Figure 47 Case style - Series 71
Figure 48 Case style - Series 72
33
Figure 49 Case Style - Series A60 Figure 50 Case Style - Series A61
Figure 51 Case Style - Series 45 Figure 52 Case Style - Series 73
Figure 53 Case Style - Series 23 Figure 54 Case Style - Series 21
34
Figure 55 3 m fibreglass blade
Figure 56 Case Style - Series 93
Figure 57 Case Style - Series J20 Figure 58 Case Style - Series J22
35
Figure 59 Case Styles A62/A63/A65
Figure 60 Case Style 09 (alternative)
A50 A51 A52 A53 A54
Figure 61 Examples of Case Styles
Figure 62 BOSCH Figure 63 Case Style - Series A50W
36
Figure 64 Case Style - Series A58W
Figure 65 Case Style - Series A57
Figure 66 Case Style - Series 25 Figure 67 Case Style - Series GW-L107S
37
Figure 68 Case Style - Series 09 Figure 69 Case Style - Series 89-1
Figure 70 Case Style - Series 85-1 Figure 71 Case Style - Series B3-1
Figure 72 Case Style - Series B3-2 Figure 73 Case Style - Series A74
38
Figure 74 Case Style - Series A75 Figure 75 Case Style - Series GW-D040
Figure 76 Case Style - Series 07 Figure 77 Case Style - Series 21
© Crown copyright 2019 NMO The Office for Product Safety and Standards Department for Business, Energy and Industrial Strategy
This material may be freely reproduced except for sale