eu-type examination certificate uk/0126/0118 revision 4 · uk/0126/0118 20 september 2013 type...

UK/0126/0118

MI-005

Issue date: Valid until:

15 November 2018 19 September 2023

Grégory Glas Lead Technical Manager For and on behalf of the Head of Technical Services

0135 NMO I Stanton Avenue I Teddington I TW11 OJZ I United Kingdom

Tel +44 (0) 20 8943 7272 I Fax +44 (0) 20 8943 7270 I Web www.gov.uk/government/organisations/office-for-product-safety-and-standards NMO is part of the Office for Product Safety and Standards within the Department for Business, Energy & Industrial Strategy

EU-type examination certificate UK/0126/0118 Revision 4

Issued by:

NMO Notified Body Number 0126

In accordance with the requirements of the Measuring Instruments Regulations 2016 (S.I. 2016 No. 1153) which implement, in the United Kingdom, Council Directive 2014/32/EU, this EU-type examination certificate has been issued to:

Pumptronics Folgate Road North Walsham Norwich Norfolk United Kingdom

In respect of a dynamic liquids other than water measuring instrument designated the C Series dispensers and having the following characteristics:

Accuracy class: 0.5

The necessary data (principal characteristics, alterations, securing, functioning etc) for identification purposes and conditions (when applicable) are set out in the descriptive annex to this certificate.

This revision replaces previous versions of the certificate.

2/13

Descriptive Annex

1 INTRODUCTION The C Series is a range of dispensers for use in attended or unattended mode. The housing comprises a hydraulics enclosure with an electronics enclosure above it. Hose connections are made at the hydraulic housing with example arrangements shown in Figures 1 to 10. The dispensers described in this document are suitable for use with fuels including petrol, ethanol blended petrol, petrol with up to 5% methanol, petrol with up to 15% MTBE, diesel and biodiesel blends and AdBlue (aqueous liquid). 2 CHARACTERISTICS Table 1 – Petrol, ethanol blended petrol, petrol with up to 5% methanol, petrol with up to 15% MTBE, diesel and biodiesel blends.

Accuracy Class 0.5

Mechanical Environment Class M3

Electromagnetic Environment Class E1

Vmin = 2 litres if Qmax ≤ 90 lpm = 5 litres if Qmax > 90 lpm often determined by national re-verification practices.

Table 2 – AdBlue – Aqueous product

Accuracy Class 0.5

Mechanical Environment Class M3

Electromagnetic Environment Class E1

Vmin = 2 litres if Qmax ≤ 90 lpm = 5 litres

(MK325 5-35 and MK325 5-30 meters)

2.1 The ambient temperature range for the dispenser is limited to a range in which the characteristics of all the individual components within the dispenser are valid. Similarly, the liquid temperature range for a dispenser is limited to a range in which the characteristics of all individual components are valid. 2.2 The overall characteristics of the measuring instrument (delivery circuit) are limited to a range in which the characteristics of all the individual components within the measuring instrument are valid. 3 CONSTRUCTION

3.1 Prime Components and Characteristics

3.1.1 The dispenser is constructed from any combination of the following prime components providing there are no conflicting characteristics within the relevant Evaluation Certificates.

Dispensers metering Adblue are equipped with Adblue compatible meters and fed from a submerged pump.

3/13

Table 3 Prime Component Summary

Manufacturer Type Evaluation

Certificate

Parts Certificate

Meters

Tatsuno FM1007 GB-1441

Pumptronics FM-00H101 GB-1442

Petrotec PTF Adblue TC7289

PIUSI S.p.A. MK325 5-35 and MK325 5-30 (Adblue compatible)

MID 128_EC_01 -

Gas Separators

Tatsuno FP1012 GB-1438

Tatsuno FP1001 GB-1439

Pumptronics FP-00H102 GB-1440

Electronic Calculator

Pumptronics MCU GB-1437

Self-service devices

ISOIL Impianta S.p.A Vega T LNE-13954

Orpak (Getpak) Orpak Island Controller GB-1529

Gilbarco Passport Europe, PBox TC7581

Tokhiem Fuel Pos TC7346

Any compatible Self-service device that has been issued with a Parts Certificate by a Notified Body responsible for Module B (MI-005) under Directive 2014/32/EU in any Member State and bears the CE marking of conformity to the relevant directives.

Conversion device (temperature compensation of volume at metering conditions to volume at base conditions)

Temptronix Inc. Genius TC8034

Any compatible ATC (automatic temperature conversion) device that has been issued with Parts Certificate by a Notified Body responsible for Module B (MI-005) under Directive 2014/32/EU in any Member State and bears the CE marking of conformity to the relevant directives.

4/13

Table 4 Prime Component Characteristics

Ambient temp

Liquid temp

Viscosity range

Qmin Qmax Pmax

FM1007 meter

-25°C to +55°C

-10°C to +40°C

0.4mPa.s to 17 mPa.s

3 lpm 90 lpm 3.5 bar

FM-00H101 meter

-25°C to +55°C

-10°C to +40°C

0.4mPa.s to 17 mPa.s

3 lpm 90 lpm 3.5 bar

PTF Adblue -25°C to +55°C

-10°C to +50°C

- 4 lpm 40 lpm 3.5 bar

FP1012 -25°C to +55°C

-10°C to +40°C

0.4 mPa.s to 17 mPa.s

- 90 lpm* 3.5 bar

FP1001 -25°C to +55°C

-10°C to +40°C


- 90 lpm** 3.5 bar

FP-00H102 -25°C to +55°C

-10°C to +40°C


- 90 lpm** 3.5 bar

MCU (calculator)

-25°C to +55°C

- - - - -

MK325 5-35 and MK325 5-30 meter

-10°C to +40°C

0°C to +40°C

1.0 mPa.s to 2.2 mPa.s

4 lpm 35 lpm 20 bar

* Gas indicator (sight glass) required at flow-rates above 40 lpm ** Gas indicator (sight glass) required at all flow-rates 3.2 Other Components and Arrangements Critical to Metrology 3.2.1 When one pump and gas separator feeds two meters which in turn feed separate hoses, a control valve is fitted in the hydraulic circuit associated with each meter. 3.2.2 The combination of hose type and length is selected to ensure hose dilation does not result in a displayed quantity at the start of a transaction prior to the nozzle being operated. 3.2.3 180 LPM approval. This is where two (90 lpm) pumps and two meters are combined into a single outlet to create 180 LPM.

3.3 Optional Components and Arrangements 3.3.1 Optional Chassis Construction 3.3.1.1 The electronics enclosure facia may be constructed of steel, aluminium, or plastic, or a combination of these materials. 3.3.1.2 The dispenser housing may be used for the construction of a satellite unit containing a hose and nozzle circuit fed from the hydraulics in a remote master dispenser. This unit may optionally house a display repeating the transaction information shown on the master. The satellite is deemed to be a nozzle of the master unit. Two satellites may share a single housing. 3.3.1.3 The electronics enclosure could be used to house the approved self-service device.

5/13

3.4 Options not critical to metrology 3.4.1 The following items may be included within the hydraulic circuits:

• Shear valves for use on dispensers

• Non-return valves separate from the pump and gas separator

• Swivels and or safety breaks in the hose assembly circuit

• Sight-glasses for non-metrological purposes in the hose assembly circuit

• Mechanical totalisers 3.4.2 The following items may be included within the electronics housing without being included in component evaluation certificates.

• Any electronics not associated with the sales transaction and not connected to circuits of the calculator, and which will not impact the EMC characteristics of the enclosure.

4 APPROVAL CONDITIONS The certificate is issued subject to the following conditions: 4.1 Markings 4.1.1 Markings are in accordance with the WELMEC Guide 10.5 Issue 1. An example is shown in Figure 11. Initial verification labels including the CE mark and supplementary metrology mark are added to this nameplate; but may be removed at subsequent field verifications. The height of the CE mark and the rectangle containing the letter “M” and year code are greater than 5mm. 4.1.2 The markings and inscriptions shall fulfil the requirements of Article 8, Article 21, Article 22 and Point 9 of Annex I of Directive 2014/32/EU. 4.2 Data Sheet 4.2.1 The datasheet format is in accordance with the WELMEC Guide 10.5 Issue 1. An example is shown in Figure 12. 4.3 Displays and Legends 4.3.1 Displays and legends are configured to meet the requirements of the country of installation. The text associated with the volume and price is greater than 10 mm high. The text associated with unit price(s) is greater than 4 mm high 4.3.2 Text is included on or near the primary display to indicate the minimum delivery for the dispenser. 5 LOCATION OF SEALS 5.1 Securing is detailed in the Evaluation or Parts Certificates for the individual components.

6/13

5.2 Components may additionally be sealed to the dispenser frame, or alternatively, may be specifically listed by serial number on a datasheet which remains with the dispenser in the calculator enclosure. 5.3 An optional tamper-proof seal maybe applied to seal the nameplate to the dispenser. An example is shown in figure 13. 6 SUPPORTING DOCUMENTATION 6.1 MID Checklist - P00529 Documentation File held at NMO 7 ALTERNATIVES 7.1 Vehicle mounted dispenser The dispenser may be vehicle mounted and powered from an independent battery and inverter bearing the CE marking according to European directives. The battery and inverter shall be independent of the vehicle’s electrical supply and shall not be connected to any charging system. A label shall be fixed to the dispenser stating its condition of use: “Not to be connected to power supplies other than the specified independent battery power supply” 8 ILLUSTRATIONS Figure 1 to 10 Typical arrangements

Figure 11 Nameplate – typical arrangements

Figure 12 Datasheet

Figure 13 Nameplate tamper-proof seal

Figure 14 Revised nameplate showing position of NB number in accordance with Directive 2014/32/EU

7/13

9 CERTIFICATE HISTORY

ISSUE NO. DATE DESCRIPTION

UK/0126/0118 20 September 2013 Type examination certificate first issued.

UK/0126/0118 Revision 1

19 December 2013 180 LPM approval added to Section 3.2.3 Gilbarco Passport added to Table 3


01 October 2014 Section 5.3 added, optional tamper-proof nameplate sealing and corresponding figure 13.


20 January 2017 Section 4.1.2 modified to refer to Directive 2014/32/EU. Section 3.1.1 Connection to any compatible SSD and/or ATC device with a parts certificate added. ISOIL Vega T electronic calculator added. Temptronix ATC device added. Section 3.3.1.3 added. Figure 14 added.


15 November 2018 Pumptronics Europe Ltd name changed to Pumptronics. Section 2, Table 1: mechanical environment changed from M1 to M3. Section 2, Table 2: mechanical environment changed from M2 to M3. Section 3.1.1: Submerged pump requirement for Adblue systems added. PIUSI S.p.A. Adblue meters added to Table 3 Section 6.1: obsolete file reference deleted Section 7.1 added.

8/13

Figure 1

Series C Retail Mono 45 to 90 LPM

Figure 2

Series C Retail Twin 45 to 90 LPM

Figure 3 Series C Commercial Mono 45 to 90 LPM

Figure 4 Series C Commercial Twin 45 to 90 LPM

9/13

Figure 5

Series C Single Product Twin

Figure 6

Series C Retail or Commercial 180LPM

Figure 7

Series C Retail or Commercial with hose

reel

Figure 8

Series C Commercial Twin Unit

Debowser one side for trade use only

10/13

Figure 9

Series C Adblue Mono (Dispenser only) Figure 10

Series C Adblue Mono (Dispenser only)

Figure 11 Nameplate – typical arrangements

11/13

Figure 12 Datasheet

Data Sheet - MID

Pump / Dispenser Serial Nr Type

Schemes Choose the applicable dispenser scheme

Mono - SC11xx

Twin - SC12xxx / SC12xxx

Form no XXXXXX

Flow Meter

Original

1

st Exchange

2

nd Exchange

3

rd Exchange

4

th Exchange

Manufacturer Position Type Serial Nr. Serial Nr. Serial Nr. Serial Nr. Serial Nr.

1

2

Pump with Gas Eliminator Device

Original

1

st Exchange

2

nd Exchange

3

rd Exchange

4

th Exchange


1 2

Pulser

Original

1

st Exchange

2

nd Exchange

3

rd Exchange

4

th Exchange


1 2

Electronic Calculator Device

Original

1

st Exchange

2

nd Exchange

3

rd Exchange

4

th Exchange


1

Temperature Compensation Device

Original

1

st Exchange

2

nd Exchange

3

rd Exchange

4

th Exchange


1 2

1 1 2

12/13

Figure 13 Nameplate tamper-proof seal

13/13

Figure 14 Revised nameplate showing position of NB number in accordance with Directive 2014/32/EU © Crown copyright 2018 NMO Office for Product Safety and Standards Department for Business, Energy & Industrial Strategy This material may be freely reproduced except for sale

eu-type examination certificate uk/0126/0118 revision 4 · uk/0126/0118 20 september 2013 type...

Documents