european pressure vessel codes carsten ruchhoeft
DESCRIPTION
european directiveTRANSCRIPT
-
TV SD Industrie Service GmbH
European Standards / DirectivesEuropean Pressure Vessel Code(s)
Pressure Vessel welding
Miami, 27th-28th January 2014Dipl.-Ing. Carsten Ruchhoeft
-
TV SD Industrie Service GmbH
2
-
TV SD Industrie Service GmbH
Agenda
European Standards EN ISO 3834 (1-5) Quality requirements for fusion welding of metallic materials Pressure Equipment Directive EN 13445, ASME code, AD 2000 code EN ISO 15614-1 EN 287-1, EN ISO 9606-1 Assembly
30.01.2014Abteilung: 3
-
TV SD Industrie Service GmbH
EN ISO 3834
EN ISO 3834Quality requirements for fusion welding of metallic materials
Part 1: Criteria for the selection of the appropriate level of quality requirements
Part 2: Comprehensive quality requirementsPart 3: Standard quality requirementsPart 4: Elementary quality requirementsPart 5: Required documents to claim conformity to the standard
30.01.2014Abteilung: 4
-
TV SD Industrie Service GmbH
EN ISO 3834-1
30.01.2014Abteilung: 5
-
TV SD Industrie Service GmbH
EN ISO 3834-5
30.01.2014Abteilung: 6
-
TV SD Industrie Service GmbH
Tasks and responsibilities EN 14731
30.01.2014Abteilung: 7
-
TV SD Industrie Service GmbH
Pressure Equipment Directive
30.01.2014Abteilung: 8
-
TV SD Industrie Service GmbH
PED- Table1
30.01.2014Abteilung: 9
Table 1: Vessels, Fluids group 1, gaseous and steam
-
TV SD Industrie Service GmbH
Pressure vessel manufacturing standards
EN 13445-harmonized standard, fulfills the requirements of the PED
ASME Section VIII, Div.1-can be used as the design code. 1. Material must be purchased following a Particular Material Appraisal (PMA). 2. Material manufacturer must be certified per PED. 3. Welding procedures and welder must be certified per EN standards.
AD 2000 Code-can be used as the design code. Advantage is the longer periodic inspection cycle compared to using the ASME code.
30.01.2014Abteilung: 10
-
TV SD Industrie Service GmbH
Additional welding requirements AD 2000
30.01.2014Abteilung: 11
-
TV SD Industrie Service GmbH
PED, Annex I, 3.1.2
30.01.2014Abteilung: 12
-
TV SD Industrie Service GmbH
EN ISO15614-1
30.01.2014Abteilung: 13
-
TV SD Industrie Service GmbH
EN 15614-1 Butt weld test requirements
30.01.2014 14
-
TV SD Industrie Service GmbH
EN ISO 15614-1- ASME Section IX
VT RT PT Tensile Bend Impact Hardness MacroASME IX yes no no 2 pieces
14% Elong.2 root2 face
no27Joule
no no
15614-1 yes yes yes 2 pieces 2 root2 face
yes yes yes
30.01.2014Abteilung: 15
Welding Procedure test requirementsButt weld
Welding Procedure test requirementsFillet weld
VT RT PT Tensile Bend Impact Hardness MacroASME IX yes no no no no no no yes15614-1 yes no yes no no no yes yes
-
TV SD Industrie Service GmbH
Pressure test failure
30.01.2014 16
Subcontracted manufacture to a China vendor, using Chinese plate material.
This pressure vessel had reached 50% of the requiredtest pressure when the shell ruptured.
Lessons learned:
All base material requirements shall be specified in the PO
ASME spec.PMA requir.
-
TV SD Industrie Service GmbH
EN 15614-1 Certificate
30.01.2014Abteilung: 17
-
TV SD Industrie Service GmbH
EN 287-1
30.01.2014Abteilung: 18
-
TV SD Industrie Service GmbH
Assembly
30.01.2014Abteilung: 19
-
TV SD Industrie Service GmbH
More complex assembly
30.01.2014Abteilung: 20
-
TV SD Industrie Service GmbH
Contact information
30.01.2014Abteilung: 21
Thank you
Carsten RuchhoeftProduct Manager IBR/Welding
Steam and Pressure GroupTUV SUD America, Inc.
10 Centennial DrivePeabody, MA 01960
[email protected]. 351-201-6330
http://www.tuv-sud-america.com