export product list/1/2016

Export product list 2016Fastening Systems for conduit-, cable- and recessed installations, for installations in Dry Wall, hollow brick, concrete and insulated ceilingsIssue 01/2016

www.schnabl-steck.com

2

No anchors, no screws!The basic principle of Schnabl fastening technology is that the fastening elements can be inserted without a tool and with very little effort into a 6 mm drill hole.

Utilising the special – eccentric – design of the expansion element when under tension, the fastening elements are securely retained in place and will thus withstands any working load seen in normal conditions.

Schnabl products can withstand torque forces up to 40 kg. The expansion elements create a friction connection with the borehole wall thereby enhancing the retention force with an increase in the load.

The world leader!As the world leader in the area of plug applications for electro installation Schnabl is constantly analyzing the work flow and develops timesaving products that help our customers to maximize the profits.

Our lineup consists of more than 200 products. This includes the universal Euroclip clamp, cable holders, clamps for buried installations and tailor made solutions for cable installation on conduits.

Our uncompromising claim on quality with our products guarantees 100 % customer satisfaction.

Saving 60 % of your working time!Schnabl took the opportunity to prove their efficiency. Under the monitoring of TÜV Austria, the work rate of conduit installation on identical parts of a building project were analyzed.

The result of this time comparison of Schnabl with traditional installation methods: Schnabl showed a clear advantage at the in wall and the on wall instal-lation. Watch your video to time comparison. Just scan the QR-Code with your smart-phone.

The benefits of Schnabl clips: Multiple installation capacity: simply drill and fasten

Only one drill diameter (Ø 6 mm) for all Schnabl clips

Fastening elements for conduits and cables, recessed and Dry Wall

Fastening on insulated ceilings and walls

Torque forces up to 40 kg

No rusting parts

Temperature range from –20 to +85 °C

UV-stabilised and halogen-free

960 °C filament also tested if desired

Tested by KEMA, TÜV and by the ‘Institut für Kunststofftechnik’

Drill. Fasten. Finish!Save up to 60 % of your working time

Video Time Comparison. Just scan the QR-Code with your smart-phone or visit us: www.schnabl-steck.com

3

Areas of applications at a glanceThe right Schnabl product for every installation

Conduit installationConduit clips and accessories Page 4–7Single and double clips Page 8Conduit clips onto steel structures Page 9

Cable installationClips for sheathed cables Page 9Dowel fastening nail for mounting cable ducts and for the functional integrity Page 10Fastening elements for aligned installation of sheathed cables Page 11Terrace installation system for sheathed cables Page 12

Recessed installationSection installation system for recessed hoses with no plastering Page 13Recessed clips for flexible conduits with no plastering Page 14

Installation in Dry WallClips and fastening elements for Dry Wall Page 15–17

Special ApplicationsFastenings on insulated ceilings and walls Page 18Fixing conduits to wire mesh in concrete ceilings Page 18Connection of two conduits Page 19Mounting of junction boxes Page 19Drilling in hollow building blocks, ceramic tiles, glass Page 19

Special informationTips and Tricks Page 20Breaking loads, recommended installation spacing Page 21General terms and conditions Page 22Schnabl products at a glance Page 23

4

The perfect combination: ESD Euro-fastening anchor and EC Euro-clip for efficient conduit laying.

Conduit installationConduit clips and accessories

ESD Euro-fastening anchorThe ESD fits into a 6 mm diameter drilled hole and is the “clip on” fixing for the Schnabl EC Euro clip.Material halogen-free, PA 6, UV-stabilised, temperature range: –20 to +85 °C IEC / EN 61386-1:2008, IEC / EN 61386-25:2011 tested Production in special colours upon request

Type Article Length Colour Content nr. mm Pack/Box

ESD 11 halogen-free 31280 11 light grey 200 / 10,800 ESD 11 halogen-free 31281 11 grey 200 / 10,800 ESD 30 halogen-free 31300 27 light grey 100 / 4,800ESD 30 halogen-free 31301 27 grey 100 / 4,800ESD 30 halogen-free 31304 27 black 100 / 4,800ESD 45 halogen-free 31320 42 light grey 100 / 3,000ESD 45 halogen-free 31321 42 grey 100 / 3,000ESD 80 halogen-free 31340 80 light grey 50 / 1,800ESD 80 halogen-free 31341 80 grey 50 / 1,800

Thanks to the functional clip system, several EC Euro clips can be clipped together in various sizes.

EC Euro-ClipFor mounting conduits of different dimensions on all surfaces.Material halogen-free: ABS, UV-stabilised, temperature range: –20 to +85 °C IEC / EN 61386-1:2008, IEC / EN 61386-25:2011 tested * This product can also be ordered in black. The article number has last digit 4.

Type Article Insolation Colour Content nr. conduit Ø Pack/Box

EC 16 halogen-free 31020 16 light grey 100 / 3,200EC 16 halogen-free 31021 16 grey 100 / 3,200EC 20 halogen-free * 31080 20 light grey 100 / 2,400EC 20 halogen-free * 31081 20 grey 100 / 2,400EC 25 halogen-free * 31120 25 light grey 100 / 2,000EC 25 halogen-free * 31121 25 grey 100 / 2,000EC 32 halogen-free * 31160 32 light grey 50 / 1,600EC 32 halogen-free * 31161 32 grey 50 / 1,600EC 40 halogen-free * 31200 40 light grey 50 / 1,100EC 40 halogen-free * 31201 40 grey 50 / 1,100EC 50 halogen-free * 31220 50 light grey 50 / 700 EC 50 halogen-free * 31221 50 grey 50 / 700

5


With UVB, even conduits with heavy cable bundles are held securely in the EC Euro-Clip.

EDV Euro twist-on connectionFor the installation of conduits on all cable trays with slotted holes with a sheet thickness from 0.5 to 1.1 mm.Material halogen-free, PA 6, UV-stabilised, temperature range: –20 to +85 °C IEC / EN 61386-1:2008, IEC / EN 61386-25:2011 tested Cable tie feedthrough up to max. 4.5 mm

Type Article Colour Content nr. Pack/Box

EDV halogen-free 31430 light grey 200 / 3,000

Ideal for fixing conduits to all conventional cable conduits with slotted holes.

UVB Universal clamping bracketWith UVB, even conduits with heavy cable bundles are held securely in the EC Euro-Clip.Material halogen-free, ABS, UV-stabilised, temperature range: –20 to +85 °C IEC / EN 61386-1:2008, IEC / EN 61386-25:2011 tested Production in special colours upon request

Type Article suitable Colour Content nr. for EC Pack/Box

UVB 16 halogen-free 34020 16 light grey 100 / 7,200UVB 16 halogen-free 34021 16 grey 100 / 7,200UVB 20 halogen-free 34080 20 light grey 100 / 6,000 UVB 20 halogen-free 34081 20 grey 100 / 6,000 UVB 25 halogen-free 34120 25 light grey 100 / 3,600UVB 25 halogen-free 34121 25 grey 100 / 3,600UVB 32 halogen-free 34160 32 light grey 50 / 2,100UVB 32 halogen-free 34161 32 grey 50 / 2,100UVB 40 halogen-free 34200 40 light grey 50 / 1,500UVB 40 halogen-free 34201 40 grey 50 / 1,500UVB 40 halogen-free 34204 40 black 50 / 1,500UVB 50 halogen-free 34220 50 light grey 50 / 1,000UVB 50 halogen-free 34221 50 grey 50 / 1,000UVB 50 halogen-free 34224 50 black 50 / 1,000

6

Ideal for fixing conduits to all conventional cable conduits with round slotted holes.

The fastening of conduits on threaded rods is made fast and easy with the Schnabl SGC.

Incredibly easy appliance! The GTH Basket Tray Holder for the time-saving mounting of conduits and junction boxes on basket trays.


ESV Euro connector lockFor the installation of conduits on all cable trays with round holes with a sheet thickness from 0.5 to 1.1 mm. Material halogen-free, PA 6, UV-stabilised, temperature range: –20 to +85 °C IEC / EN 61386-1:2008, IEC / EN 61386-25:2011 tested. Cable tie feedthrough up to max. 4.5 mm

Type Article nr. Colour Content Pack/Box

ESV halogen-free 34430 light grey 200 / 3,000

SGC Schnabl Thread Clip For fastening conduits on M8-M10 threaded rods in combination with the EC Euro-Clip.Material halogen-free, PP, UV-stabilised, temperature range: –10 to +85 °C

Type Article Ø of Threaded Colour Content nr. rods Pack/Box

SGC halogen-free 31460 M8-M10 light grey 100 / 3,500

GTH Basket Tray Holder Easy and cost effective solution for mounting conduits and junction boxes on cable trays. Material galvanised

Type Article nr. Content Pack/Box

GTH 9001 50 / 1,600

7

The ESP is suitable for shooting tools from Hilti, Spit and Würth. It sticks to the mouth of the shooting tool from these manufacturers leaving your hands free for mounting.


ESP Euro shooting plate For conduit and cable laying – in conjunction with the EC Euro-Clip system – with the help of a shooting tool. The two rings of the ESP are matched to the shooting tools from Hilti, Spit and Würth (Art. nr.: 0864 90).Material halogen-free, PA 6, UV-stabilised, temperature range: –20 to +85 °C IEC / EN 61386-1:2008, IEC / EN 61386-25:2011 tested Cable tie feedthrough up to max. 4.5 mm

Type Article Colour Content nr. Pack/Box

ESP halogen-free 31440 light grey 100 / 2,000

Should conduits have a set distance to the wall, then the distance gripper clamp is the way ahead!

Can be mounted both ways with every Schnabl Euro-clip. You only need one drill hole.

AKS distance gripper clamp For retaining single conduits with a fixed distance from the wall with the least effort and greatest time efficiency. Material halogen-free, PA 6, UV-stabilised, temperature range: –20 to +85 °C IEC / EN 61386-1:2008, IEC / EN 61386-25:2011 tested Production in special colours upon request

Type Article Insolation Colour Content nr. conduit Ø Pack/Box

AKS 16 halogen-free 30740 16 light grey 200 / 4,800 AKS 16 halogen-free 30741 16 grey 200 / 4,800 AKS 20 halogen-free 30800 20 light grey 200 / 3,200 AKS 20 halogen-free 30801 20 grey 200 / 3,200AKS 25 halogen-free 30840 25 light grey 100 / 2,200 AKS 25 halogen-free 30841 25 grey 100 / 2,200 AKS 32 halogen-free 30880 32 light grey 100 / 2,000 AKS 32 halogen-free 30881 32 grey 100 / 2,000 AKS 40 halogen-free 30900 40 light grey 50 / 1,400 AKS 40 halogen-free 30901 40 grey 50 / 1,400AKS 50 halogen-free 30920 50 light grey 50 / 750 AKS 50 halogen-free 30921 50 grey 50 / 750

8

Conduit installationSingle- and double clips

ESS single fastening clamp For conduit installation, without wall distance, for example on ceilings and under concrete. Material halogen-free, PP, UV-stabilised, temperature range: –10 to +85 °C IEC / EN 61386-1:2008, IEC / EN 61386-25:2011 tested

Type Article Clamping Colour Content nr. range mm Pack/Box

ESS 16–20 halogen-free 30120 16–20 light grey 200 / 4,400 ESS 20–25 halogen-free 30140 20–25 light grey 200 / 3,200 ESS 25–32 halogen-free 30160 25–32 light grey 100 / 2,400

DSS Double fastening clamp For the parallel laying of two conduits without wall distance. Material halogen-free, PP, UV-stabilised, temperature range: –10 to +85 °C IEC / EN 61386-1:2008, IEC / EN 61386-25:2011 tested


DSS 20–25 halogen-free 30240 20–25 light grey 200 / 4,000DSS 25–32 halogen-free 30250 25–32 light grey 100 / 2,400

The product for quick installation of conduits onto plaster the ESS single fastening clamp from Schnabl.

One borehole is also enough for two conduits – with the double fastening clamp from Schnabl.

DSA Double fastening clamp with spacer For the parallel laying of two conduits without wall distance; with fixed distance between the conduits. Material halogen-free, PP, UV-stabilised, temperature range: –10 to +85 °C IEC / EN 61386-1:2008, IEC / EN 61386-25:2011 tested


DSA 20–25 halogen-free 30260 20–25 light grey 100 / 2,400DSA 25–32 halogen-free 30270 25–32 light grey 100 / 1,600

The practical double fastening clamp is also available with a fixed conduit distance.

9

Conduit and Cable installationConduit clips onto steel structures · Clips for sheathed cables

RK Conduit Claw For conduit laying onto steel structures. Material spring band steel, galvanized, corrosion-resistant

Type Article Span area Thickness of Content nr. conduit dimension steel beams mm Pack/Box

RK 16/1 9032 15–19 2–4 100 / 3,600 RK 20/1 9034 20–24 2–4 100 / 3,000 RK 25/1 9036 25–32 2–4 100 / 2,000 RK 16/4 9038 15–19 4–7 100 / 3,200 RK 20/4 9040 20–24 4–7 100 / 2,800 RK 25/4 9042 25–32 4–7 100 / 2,000 RK 16/8 9044 15–19 8–12 100 / 2,600 RK 20/8 9046 20–24 8–12 100 / 2,400 RK 25/8 9048 25–32 8–12 50 / 1,500

The RK conduit claw is attached to loose conduits to steel beams by means of a simple insertion.

Cable installation · Clips for sheathed cables

DKS Dowel clamp For the installation of single cables and cable bundles, such as antenna cables, telephone lines, etc. Material halogen-free, PP, UV-stabilised, temperature range: –10 to +85 °C Production in special colours upon request


DKS 3–13 halogen-free 30020/30023/30024 3–13 light grey/white/black 200 / 7,200 DKS 6 –20 halogen-free 30030/30033/30034 6–20 light grey/white/black 200 / 4,800 DKS 8–28 halogen-free 30040/30043/30044 8–28 light grey/white/black 200 / 6,000 DKS 20–40 halogen-free 30060/30063 20–40 light grey/white 200 / 4,000

DSS Double fastening clamp For the parallel laying of two cables without wall distance. Material halogen-free, PP, UV-stabilised, temperature range: –10 to +85 °C


DSS 10 halogen-free 30220 4–12 light grey 200 / 7,200

One borehole is also enough for two cables – with the double fastening clamp from Schnabl.

Good cable tension options with the DKS. When laid, the strap is barely visible.

10

MDSN Metal dowel fastening nail Schnabl have the patented mounting solution for time saving installation of fire resistant cabling. The Schnabl MDSN is fully compliant with DIN 4102-12 requirements.Material Stainless steel W-No.: 1.4310, material thickness: 0.3 mm, Maximum thickness of fastening element: 5 mm

Type Article nr. Nail length mm Content Pack/Box

MDSN 9002 36 100 / 3,900

Cable installationDowel fastening nail for mounting cable ducts and for the functional integrity

DSN Dowel fastening nail Dowel fastening nail for fixing cable trunking, for smoke detectors and small lamps.Material halogen-free, PA 6, UV-stabilised, temperature range: –20 to +85 °C

Type Article Nail length Colour Content nr. mm Pack/Box

DSN 30 halogen-free 30320 31 light grey 200 / 10,800DSN 40 halogen-free 30340 40 light grey 200 / 7,200 DSN 50 halogen-free 30360 49 light grey 200 / 6,000

With the DSN 30 und DSN 40 you will successfully fasten fire detectors, lamps and sockets „at the push of a thumb“.

The patented mounting solution for the functional integrity. Fire proof plug-in dowel for the fixing of electrical installations. No tools needed!

11

27 m

m

Cable installationFastening elements for aligned installation of sheathed cables

KB Cable bracket For aligned installation of plastic-sheathed cables.Material halogen-free, PP, UV-stabilised, temperature range: –10 to +85 °C

Type Article nr. Colour Content Pack Content Box

KB 10 halogen-free 30420 light grey 50 1,000 KB 20 halogen-free 30440 light grey 25 600

KBS Cable bracket for shooting For the aligned installation of plastic-sheathed cables using common direct shooting fastening systems. The KBS is adapted to the shooting tools from Hilti, Spit and Würth (Art. nr.: 0864 90). Material halogen-free, PP, UV-stabilised, temperature range: –10 to +85 °C

Type Article nr. Colour Content Pack Content Box

KBS 20 halogen-free 30460 light grey – 100/500

KB cable brackets were developed for aligned installations of cable bundles.

Of course the possible combination between EC Euro Clips and KB cable bracket is given.

An additional EC Euro-Clip for Conduit installation can be mounted at the center of the KBS.

212 mm

115 mm

90 mm

27 m

m

KB 20

KB 10

12

Cable installationFastening elements for aligned installation of sheathed cables

SHS cable holder for screws For the multiple carrying of up to 15 cables with Ø 10 mm. The SHS is designed for materials in which the plug-in technology doesn’t work.Material halogen-free, PP, UV-stabilised, temperature range: –10 to +85 °C

Type Article nr. Capacity* Colour Content Box

SHS 15 halogen-free 30560 max. 15 light grey 150

* based on NYM 3 x 1,5 mm2

The SH holder forms a closed ring around the plastic-sheathed cables and can be re-opened using a handle.

By using a screw the SHS can be easily fastened on metal or wood. The SHS forms a closed ring around the cables and can be re-opened using a handle.

85 m

m

85 m

m

50 mm 98 mm

SH Cable HolderFor the multiple carrying of up to 30 plastic-sheathed cables with Ø 10 mm.Material halogen-free, PP, UV-stabilised, temperature range: –10 to +85 °C

Type Article nr. Capacity* Colour Content Box

SH 15 halogen-free 30520 max. 15 light grey 150 / 400 SH 30 halogen-free 30540 max. 30 light grey 70 / 200

* based on NYM 3 x 1,5 mm2

85 m

m

50 mm

SH 15 SH 30

13

Cable- and recessed installationTerrace installation system for recessed sheathed cables and hoses

Enables the installation of bales onto metal and wood using TA and TB.

TAP Support anchor panel for TA 30 and TA 100For laying cable on surfaces such as metal, wood or plaster by simply screwing the TAP Support anchor panel to the surface, for holding the TA Support anchor and TB terrace bracket. Material halogen-free, PP, UV-stabilised, temperature range: –10 to +85 °C

Type Article Length x Colour Content nr. width mm Pack/Box

TAP 1 halogen-free 33250 35 x 35 light grey 100 / 3,000 TAP 2 halogen-free 33230 35 x 16 light grey 100 / 9,000

TA Support anchor for TB 10 and TB 20 For fastening cables, flexible tubing and conduits, on and under plaster. Material halogen-free, PA 6, light grey, UV-stabilised, temperature range: –20 to +85 °C

Type Article Shaft length Dowel Content nr. mm length mm Pack/Box

TA 30 halogen-free 33110 30 100 / 8,000TA 100 halogen-free 33120 100 100 / 3,600TA 30/25 halogen-free 33130 30 25 100 / 5,400TA 100/25 halogen-free 33170 100 25 100 / 2,400TA 30/55 halogen-free 33150 30 55 100 / 3,000TA 100/55 halogen-free 33190 100 55 100 / 1,600

TB Terrace bracket for locking on to TA The TB provides a secure hold even with different conduit dimensions. Fast cable placement without plastering. Material halogen-free, POM, UV-stabilised, temperature range: –20 to +100 °C


TB 10 halogen-free 33050 100 light grey 50 / 1,000 TB 20 halogen-free 33080 200 light grey 25 / 600

TAP 1

TAP 2

TA 30

Recessed installation · Terrace installation system for recessed hoses

With the TB in two sizes, Schnabl has a system for all requirements – on or under Dry Wall. Safe hold – even with different conduit dimensions!

14

Recessed installationRecessed clamps for conduits

USE Recessed clamp single For the simple laying of flexible conduits without plastering (on concrete, hollow brick, plaster walls, aerated concrete).Material halogen-free, PP, light grey, temperature range: –10 to +85 °C

Type Article Clamping Dowel Content nr. range length mm Pack/Box

USE 16-20/55 halogen-free 12110 16–20 55 100 / 3,200 USE 20-25/55 halogen-free 12120 20–25 55 100 / 2,400 USE 25-32/55 halogen-free 12130 25–32 55 100 / 2,000

Simply brilliant: the integrated nib on the interior side of the clip enables the conduit to tense between the two clips for easier cable insertion.

An innovative product for sub-plaster mounting – the Recessed Clamp Automatic USA. A quick press is enough to affix the clamp to the conduit.

closed open

Plas

ter-

bo

ard

Conc

rete

Plas

terb

oard

Hollo

w

bric

k

USA Automatic recessed clamp For the simple laying of flexible conduits without plastering, on plasterboard, concrete and hollow brick. Material halogen-free, PP, temperature range: –10 to +85 °C * IEC / EN 61386-1:2008, IEC / EN 61386-25:2011 tested

Type Article Clamping Colour Dowel Content nr. range length mm Pack/Box

USA 16-20/11 halogen-free * 12330 16–20 light grey 11 100 / 3,200USA 20-25/11 halogen-free * 12340 20–25 light grey 11 100 / 2,400 USA 25-32/11 halogen-free * 12350 25–32 light grey 11 50 / 1,200 USA 16-20/25 halogen-free * 12430 16–20 light grey 25 100 / 3,200 USA 20-25/25 halogen-free * 12440 20–25 light grey 25 100 / 2,200 USA 25-32/25 halogen-free * 12450 25–32 light grey 25 100 / 1,200 USA 16-20/55 halogen-free 12530 16–20 light grey 55 100 / 2,400 USA 20-25/55 halogen-free 12540 20–25 light grey 55 100 / 1,600 USA 25-32/55 halogen-free 12550 25–32 light grey 55 50 / 1,000

15

Recessed installation and installation in Dry WallRecessed clamps for conduits · Clips and fastening elements for Dry Wall

Two conduits are mounted at the same time with the USD with just one borehole.

Thanks to the integrated nib on the interior clip side, the conduit can be tensed for easier cable insertion.

CF C-Fix for impact mounting For mounting conduits to the inner side of plasterboard walls. Material chromed steel

Type Article Conduit Torque Content nr. Ø values Pack/Box

CF 16 9116 16 11 kg 100 /3,200CF 20 9120 20 10 kg 75 / 2,400CF 25 9125 25 9 kg 50 / 1,600

All torque values are average values and may differ due to different influences.

Installation in Dry Wall · Clips and fastening elements for Dry Wall

With C-Fix, conduits can be mounted to Dry Walls easily without drilling. The unique shape ensures a firm grip and leaves the outer wall undamaged.

USD Recessed clamp double For the simple laying of flexible conduits without plastering, on plasterboard, concrete and hollow brick, for laying two conduits.Material halogen-free, PP, light grey, temperature range: –10 to +85 °C * IEC / EN 61386-1:2008, IEC / EN 61386-25:2011 tested

Type Article Clamping Dowel Content nr. range length mm Pack/Box

USD 16-20/25 halogen-free * 12220 16–20 25 200 / 4,800USD 20-25/25 halogen-free * 12230 20–25 25 100 / 3,200 USD 25-32/25 halogen-free * 12240 25–32 25 100 / 1,600 USD 16-20/55 halogen-free 12170 16–20 55 100 / 3,200 USD 20-25/55 halogen-free 12180 20–25 55 100 / 2,400 USD 25-32/55 halogen-free 12190 25–32 55 100 / 1,600

Conc

rete

Hollo

w b

rick

16

Using the PD Board anchor to attach the EC Euro-Clip easily in Dry Wall and even on woodwool slaps.

Installation in Dry WallClips and fastening elements for Dry Wall

SBA Schnabl-drill stopFor the exact drilled depth in Dry Wall.Material Polyamid PA 6, glass fibre reinforced

Type Article Drill Outer Colour nr. Ø mm Ø mm

SBA 6 32905 6 30 grey-red

Ideal for mounting in Dry Wall: the SBA reliably prevents the Dry Wall from being drilled through. With the SBA Schnabl-drill stop you easily can set the drill depth.

PD Board anchor for Dry Wall and woodwool slaps For the attachment of electrical equipment to plasterboard and woodwool slaps. Material spring bend steel galvanized. Product contains no relevant material in terms of REACH-regulation EC (No 1907/2006)

Type Article Screw Length Torque Content nr. Ø mm values Pack/Box

PD 1 9080 3,5–4,5 30 40 kg 100 /5,000PD 2 9082 3,5–4,5 43 40 kg 100 /3,000

All torque values are average values and may differ due to different influences. Recommended screws: 3.5–4 mm Ø, screws not included in delivery package.

USA Recessed clamp automatic For easy installation of conduits on Dry Wall.Material halogen-free, PP, temperature range: –10 to +85 °C IEC / EN 61386-1:2008, IEC / EN 61386-25:2011 tested

Type Article Clamping Colour Anchor Content nr. range length mm Pack/Box

USA 16-20/11 halogen-free 12330 16–20 light grey 11* 100 / 3,200 USA 20-25/11 halogen-free 12340 20–25 light grey 11* 100 / 2,400 USA 25-32/11 halogen-free 12350 25–32 light grey 11* 50 / 1,200 USA 16-20/25 halogen-free 12430 16–20 light grey 25** 100 / 3,200 USA 20-25/25 halogen-free 12440 20–25 light grey 25** 100 / 2,200 USA 25-32/25 halogen-free 12450 25–32 light grey 25** 100 / 1,200

* for laying in Dry Walls up to 12.5 mm thick; the outer side of the wall remains undamaged. ** for laying in Dry Walls up to 30 mm thick and on Fermacell; the outer side of the wall remains undamaged. With the extra short tail, the USA is also suitable

for use in Dry Wall. The outer side of the wall remains undamaged.

17

Installation in Dry WallClips and fastening elements for Dry Wall

The EC Euro clip can also be mounted on steel structures or Dry Wall using the EKP Euro adhesive plate.

A cable-tie and an ESD are sufficient to fix a bundle of cables.

EKP Euro adhesive padFor fastening electrical lines on all surfaces where drills and screws cannot be used, e.g. on steel structures or corrugated sheets.Material halogen-free, ABS, light grey, UV-stabilised, temperature range: –20 to +85 °C

Type Article Length x width Torque Content nr. mm values* Pack/Box

EKP halogen-free 31360 38 x 35 20 kg 100 / 3,000

* All torque values are average values and may differ due to different influences. Dependant on the adhesive used.

ESD Euro-fastening anchorThe ESD fits into a 6 mm diameter drill-hole and is the “clip on” fixing. Material halogen-free, PA 6, UV-stabilised, temperature range: –20 to +85 °C IEC / EN 61386-1:2008, IEC / EN 61386-25:2011 tested Cable tie feedthrough up to max. 4.5 mm, cable ties not included.

Type Article Length Colour Content nr. mm Pack/Box

ESD 11 halogen-free 31280 11 light grey 200 / 10,800ESD 30 halogen-free 31300 27 light grey 100 / 4,800

* for laying in Dry Walls up to 12.5 mm thick; the outer side of the wall remains undamaged. ** for laying in Dry Walls up to 30 mm thick and on Fermacell; the outer side of the wall remains undamaged.

18

DHI Insulation fixing For the simple mounting of electrical equipment. The DHI is used to fasten clips, junction boxes and light cable trays, on insulated ceilings and walls.Material halogen-free, PA 6, light grey, UV-stabilised, temperature range: –20 °C to +85 °C

Type Article Insulation Total Content nr. thickness cm length cm Box

DHI 8 halogen-free 31510 3–4 8 225 DHI 10 halogen-free 31530 4–6 10 175 DHI 13 halogen-free 31550 6–8 13 150 DHI 15 halogen-free 31570 8–10 15 125 DHI 17 halogen-free 31590 10–14 17,5 75DHI 25 halogen-free 31610 15–20 25 75DHI 30 halogen-free 31630 20–25 30 75DHI 35 halogen-free 31650 25–30 35 70

Assembly instructions: minimum setting depth in the stable subsurface = 45 mm Drilling diameter = 10 mm. Minimum drilling depth = overall length DHI + 10 mm Recommended screws: Steel sheeting- or chipboard screws 4 mm, screw-in depth in DHI = 10–15 mm.

With the DHI insulation fixing, you don’t just mount the insulation but also the electricity supply.

Special ApplicationsFastenings on insulated ceilings and walls

SBC Schnabl Wire Mesh ClipTo fix conduits to wire mesh in concrete ceilings. Material halogen-free, PP regranulat, brown, silicon-free, temperature range: –10 °C bis +85 °C

Type Article Conduit Wire Content nr. dimension mm dimension mm no./Box

SBC halogen-free 34238 20 und 25 12 500

The conduit is pushed into the big opening, with the small opening attached to the wire. Fixings in the small opening prevent the clip from sliding.

Fixing conduits to wire mesh in concrete ceilings

19

Special ApplicationsConnection of two conduits and mounting of junction boxes

With the ECV you can easily connect two Euro Clips to add additional conduits in narrow spaces.

SDC offers a timesaving and effort-saving installation of junction boxes onto cable trays.

The LB lance drill is also ideal for tiling and ceramics. Even professionals who use the lance drill don’t go back.

ECV Euro-Clip Connector For the connection of two conduits with two Euro Clips and an ECV.Material halogen-free, PA 6, UV-stabilised, temperature range: –20 to +85 °C


ECV halogen-free 31560 light grey 200 / 3,000

SDC Schnabl Distribution Box Clip Save time and energy when installing junction boxes onto cable trays.Material halogen-free, POM, UV-stabilised, temperature range: –20 to +100 °C


SDC halogen-free 31450 light grey 200 / 3,000

LB Lance drillFor the exact hole in hollow bricks, tiles and earthenware.

Type Article nr. Drill Ø mm Shaft length mm

LB 6/100 9095 6 100LB 6/150 9097 6 150LB 8/160 9099 8 160LB 10/160 9101 10 160LB 10/250 9103 10 250

Drilling in hollow building blocks, ceramic tiles, glass

20

Tips and TricksDrilling into different building materials

With the right tool, any mounting goes much quicker!

Percussion drill, Ø 6 mmConcrete, solid brick, lime sandstone, stone

HSS drill, Ø 6 mmPlasterboard, aerated concrete

Lance drill, Ø 6 mmHollow brick, earthenware tiles, glass

21

Breaking loads and installation spacingSchnabl products in detail

The breaking loads of the Schnabl fasten-, screw- and slam fastening:Average values of the torque test of the TU Graz and the ‘Austrian Kunststoffinstitut TGM’.

The following table shows the average values of the tests carried out in July and August 2009 (all details in Newton):

Subsurface/ product

Concrete Full brick Hollow bric1) (Porotherm)

Aerated concrete2)

Plasterboard2) 15 mm

Plasterboard 25 mm

Woodwool slaps

ESD 30 359.00 325.50 335.70 151.30 225.60

AKS 20 391.30 341.90 245.20 151.30

AKS 25 504.40 404.30 387.20 187.10

KB 10 343.70 331.00

SH 15 292.80 282.20

SH 30 272.20 311.10

USA 20–25/25 241.40 210.20 234.70 106.60 191.20

USE 20–25/25 223.40 233.10

CF 20 119.60 169.00

CF 25 128.00 168.00

PD 1 459.50 933.10 115.70

PD 2 446.90 1,227.00 210.70

DKS 3–13 248.00 271.80

DHI 153) 780.60 828.70 707.80 378.70

DSN 30 340.00 330.00 310.00 75.00 85.00

TA 100/25 369.00 374.00 365.20 148.10

MDSN 250.00

1) In this material drilling was done without “percussion“ (with 6 mm lance drill)2) In these materials drilling was done without “percussion“ (with 6 mm iron drill)3) Assembly instructions: minimum setting depth in the stable subsurface = 45 mm. drilling diameter = 10 mm. minimum drilling depth = overall length DHI + 10 mm

The torque values given are breaking loads in which the fastening tears or the fastening shaft has been pulled out of the borehole. The required safety factor must be observed based on the particular use.

Recommended installation spacingAttachment points for SH for vertical installation of sheathed cables NYM 3 x 1.5 mm² at a distance of 50 cm to max. 70 cm, for KB and TB at a distance of 60 cm to max. 80 cm.

For cables with smaller diameter we recommend a shorter laying the corresponding distance. For longer lines, is to provide a suitable strain relief.

Fastening points when laid horizontally sheathed cables NYM 3 x 1.5 mm² at a distance of 50 cm to max. 70 cm.

22

1. General information, quote and order confirmation

All deliveries and performances shall be based exclusively on the present

terms and conditions. Scope and price of the deliveries are confirmed by

a written order confirmation on our side, and any secondary arrangements

or any other agreements made with our representatives only become valid

if confirmed by us in writing. Any verbal agreements that have not been

confirmed in writing shall be deemed null and void. Our representati-

ves are only agents for orders and they have no power of representation.

They are not authorised to confirm any orders, guarantee delivery times,

acknowledge any defects or damage, or to give price reductions or

discounts. We shall not be bound by any delivery conditions of the Purchaser

and we hereby expressly reject them. Any deviating terms and conditions of

the Purchaser that are not recognized explicitly by us shall not be binding on

us, even where they are made the basis of an order and we fail to explicitly

reject their content. All quotations are non-binding and goods delivered from

stock are always subject to prior sale. We may elect to deliver fully or partly

equivalent goods, if the Purchaser has not ruled this out when placing the

order. By placing an order, the customer acknowledges that its data will be

stored in an EDP file for the purposes of efficient submission for quotations

and order processing.

2. Delivery The delivery period begins upon the acceptance of the order by us, but

not until all specification details have been clarified. Such delivery period

shall not be binding on us. Acts of God or other events beyond our control,

which considerably complicate delivery or make delivery impossible, e.g.

operational or traffic problems, strikes, lock-outs, obstructions caused by

official orders, lack of raw materials etc., shall entitle us to postpone de-

livery for the period of such obstruction plus a reasonable lead time or to

withdraw from the contract – even on account of the part not yet fulfilled.

The Purchaser is entitled to demand a statement from us as to whether we

intend to withdraw or to deliver within an appropriate period of time. If we

fail to make such a declaration, the Purchaser is entitled to withdraw from

the contract. Any claims for damages are excluded. All prices are given ex

works Schnabl, Austria.

3. Dispatch and transfer of risk The risk in respect of the delivery shall pass to the customer, even where

we pay the costs of transport or own vehicles are used for the shipment.

Unless otherwise agreed, we shall determine the type of dispatch. In the

case of agreed payment of freight costs, the freight shall be advanced by the

recipient free of any discount and credited on presentation of the supporting

documents. Increases in freight and customs duties, transfer costs and any

lower costs shall be paid by the Purchaser. Changes in tariffs are either

charged or credited to the party paying the freight costs.

4. Packaging

Any packaging required shall be charged at cost price and is not taken back.

5. Prices The prices agreed are those in the written order confirmation and where

this has not been issued, those in the order issued by us and confirmed in

writing. They correspond to the cost situation at the time of confirmation or

issue of the order. In the event of extraordinary circumstances occurring

between placing of the order and delivery, such as wage or raw material

price increases, increases in public charges and similar increases, we

reserve the right to increase the prices in the amount of additional costs.

6. Payment terms Payment shall be made within 30 days from the date of invoice in cash

without any deductions. A discount of 3% is given for payment within 8 days

from the date of invoice. Any other conditions require written agreements.

Bills of exchange and cheques are only accepted as a form of payment and

the acceptance of bills of exchange shall in any case be subject to prior con-

sent. We will only accept discountable bills of exchange. No discount is given

in the event of payment by bill of exchange. All discount or bill of exchange

expenses shall be borne by the Purchaser. If deliveries are made in part con-

signments, the purchase price of each part consignment is due regardless of

the remaining deliveries. In the event that the deadline is not adhered to, we

reserve the right to charge interest of at least 4% above the Austrian Central

Bank’s discount rate. The right to assert further damage claims remains

unaffected. There is no requirement for us to send a reminder. In the event of

failure to pay, of protests in connection with bills of exchange or cheques or

other circumstances, which render the Purchaser’s creditworthiness doubt-

ful, all our accounts receivable shall become immediately due, regardless

of payment dates agreed, and we are entitled to charge costs at the rate

of usual bank interest and charges for the granting of credit from the par-

ticular invoice date. If, after conformation of the order, we are made aware

of circumstances, which render the Purchaser’s creditworthiness doubtful,

we are entitled to withdraw from the contract or request advance payment

in cash. A circumstance that renders the creditworthiness of a Purchaser

doubtful is in particular negative credit information from a credit agency.

A right of retention or set-off in relation to the purchase price or other

Purchaser’s obligations is excluded in the case of all deliveries and part

consignments. The right of reduction of the purchase price is only permitted

under Item 8 of these conditions. Unless we have clearly acknowledged the

Purchaser’s right of reduction in writing, the Purchaser is obliged to pay the

full purchase price.

7. Reservation of title Deliveries shall be made under reservation of title exclusively. The goods

delivered shall remain our property until complete payment of the purchase

price and all receivables, of whatever nature, arising from the entire busi-

ness relationship. The retention of title shall continue to exist even if a ba-

lance confirmation has taken place after the closure of the account. Title

to the goods only passes once all checks and bills of exchange offered in

payment and related costs have been cashed. If there is a payment settle-

ment in the so-called cheque-bill of exchange procedure, then our retention

of title shall not end until we can no longer be held liable in relation to the

liability of the bill of exchange. If the Purchaser resells the goods on credit,

it similarly undertakes to retain the title. Accordingly, provided the Purchaser

withholds payments before the goods supplied have been paid for, the Ven-

dor has the right to recovery of the goods or to the assignment of rights to

the consideration stipulated in the Austrian Bankruptcy Act. If a third party is

in possession of the goods, the Purchaser shall hereby assign to us its right

to restitution vis-à-vis the third party. If the Purchaser is in possession of

goods supplied by us under retention of title, a safekeeping arrangement is

deemed agreed between the Vendor and us. The Purchaser shall not pledge

nor assign as security the goods subject to retention of title or the articles

manufactured from them. If the Purchaser resells the goods supplied by

us, irrespective of their condition, it hereby assigns to us the claims it has

against its customers or other third parties from such sale, incl. all ancillary

rights, until all of our receivables from goods deliveries including ancillary

costs have been fully paid. If the goods subject to retention of title are sold

by the Purchaser after processing separately or along with other goods not

belonging to us, the assignment of the claims from resale shall only ap-

ply to the amount of the invoice value which corresponds to our reserved

goods. At our request, the Purchaser is obliged to notify its custo-

mers of such assignment and hand over to us the documents which we

require for asserting our rights against these customers. If the value of the

securities provided to us exceeds our overall claim from deliveries by more

than 20%, we are obliged, if requested by the Purchaser, to release security

interests which we deem appropriate. The Purchaser shall inform us im-

mediately should our rights be affected by any third party. The Purchaser

shall not pledge or assign as security, the goods or claims existing in their

stead. If the Purchaser does not adhere to the agreed payment terms, we

are entitled to pledge or assign as security the goods or claims existing in

their stead. If the Purchaser does not adhere to the agreed payment terms,

we are entitled, without withdrawing from the contract, to demand that the

goods be returned, until the Purchaser has fulfilled its payment obligations.

8. Complaints Complaints about goods delivered shall only be considered if received within

8 days from receipt of the goods. Any defective goods shall be returned to

us on request. If the defect is acknowledged by us, we reserve the right,

at our discretion, to take back the defective goods, with us withdrawing

from the contract of sale, or provide replacement goods within an adequate

period or to credit the difference between the actual (inferior) value and the

order value of the goods. If a warranty for defects is requested, this can only

be given if the defect was shown to have occurred due to circumstances

occurring before the transfer of risk. In total, the warranty is limited to no

more than 6 months after transfer of risk. Further claims such as claims

for payment of damage arising from services agreed and rendered by us,

or for payment of wages, default penalties or consequential loss are exclu-

ded. Approval of reference samples by the customer excludes a subsequent

notice of defects, provided the goods delivered correspond to the reference

samples approved.

9. Fitness for purpose and design changes in products

Liability for parts delivered in accordance with particular suggestions, drafts

or drawings is limited to the parts delivered manufactured in accordance

with the documentation provided to us. We also reserve the right to change

the design of our products for technical reasons, with us also reserving the

right to choose the raw material. The customer shall be notified by us in

good time of any design changes, if they are material.

10. Moulds

Moulds, other tools etc shall remain our property even where tool costs are

paid in full or in part by the customer. Where the customer has only made a

contribution to the costs or if we have paid the costs in full, the balance or

the full amount of the moulds and tool costs shall be due to us immediately,

if the customer, for whatever reason, does not accept the goods ordered or

does not issue the orders or repeat orders promised.

11. Property rights

To the extent that we have to deliver goods on the basis of drawings, mo-

dels, samples or other documentation that the customer has provided, the

latter shall be liable for ensuring that the manufacture and supply of such

goods is not in breach of any third party industrial property rights. In the

event that third parties do not permit us to produce or deliver goods on the

basis of drawings, models, samples or other documentation from the cus-

tomer, by reference to such property rights, we shall not be obliged to verify

the legal status of such claims and the customer shall have no right to claim

damages. In such event, however, we shall be entitled to discontinue the

manufacture and supply and to claim compensation for any costs incurred.

If requested, the customer shall make an appropriate advance payment for

any legal costs that might arise from any violations and the assertion of

any property rights.

12. Export orders

These sales and delivery terms apply accordingly to export orders and

the law of the Republic of Austria shall also apply. If the legislation of the

customer’s country renders the transfer of the purchase price to us difficult

or if the value of the currency of this country drops, we are entitled to refuse

to make deliveries without any liability for damages or to demand a corre-

sponding change in the terms of purchase and delivery terms. Likewise,

the customer is obliged to immediately compensate us for any exchange

rate fluctuations that are unfavourable for us, where orders are paid for in

currencies other than EURO. Any disputes shall be finally settled under the

rules of arbitration of the International Chamber of Commerce by one or

more arbitrators appointed in accordance with the said rules if both parties

agree to this procedure.

13. Place of performance and jurisdiction

The place of performance for delivery and payment is the registered office

of the company. The court of jurisdiction is the competent court in St. Pölten.

14. Miscellaneous

Should individual clauses contained in these Delivery and Payment Terms

or other parts of the contract prove invalid, this shall not affect the validity

of the remaining clauses. The Purchaser‘s rights arising from the contrac-

tual relationship shall only be transferable subject to our prior agreement

in writing. If we take goods back and they are standard products, these

can only be credited at 75% of the invoice amount. In the case of custom-

made products, a return of the purchased product is excluded.

Where agreements differ from the above conditions, these must be made in

writing to become effective. We are authorised in any case to make partial

deliveries. Austrian Law shall apply exclusively.

General terms and conditionsof SchnabI Stecktechnik GmbH

Legal notice: SchnabI Stecktechnik GmbH · Bahnhofplatz 1 · Po box 63 · 3100 St. Polten · Austria · Telephone +43 (0)2742/221 67-0 · Fax +43(0) 2742/221 67-50 · [email protected] · www.schnabl-steck.comDesign: Werbeagentur Arno Brandauer, www.arno-brandauer.at · Photos: Stefan Ziller · Print and written errors reserved · Issue 01/2016

23

Schnabl products at a glanceOnce you’ve worked with them you’ll never go back

On insulations

DHI Insulation fixing Page 18

In concrete ceilings

SBC Schnabl Wire Mesh Clip Page 18

Connection of two conduits

ECV Euro-Clip Connector Page 19

Mounting of junction boxes

SDC Schnabl Distribution Box Clip Page 19

Drilling in hollow building blocks, ceramic tiles, glass

LB Lance drill Page 19

For Dry Wall

CF C-Fix Page 15PD Board anchor Page 16ESD Euro fastening anchor Page 16USA Recessed clamp autom. Page 16SBA Schnabl drill stop Page 17EKP Euro adhesive pad Page 17

For cables

DKS Dowel clamp Page 9DSS Double fastening clamp Page 9DSN Dowel fastening nail Page 10MDSN Metal dowel fastening nail Page 10KB Cable bracket Page 11KBS Cable bracket for shooting Page 11SH Cable Holder Page 12SHS Cable Holder for screws Page 12TB Terrace bracket Page 13TA Support anchor Page 13TAP Support anchor panel Page 13

TB

USA USE USDTA

CF PD

ESD

USA EKPSBA

DHI

SBC

ECV

LB SDC

ESD EC UVB

EDV GTH

ESV SGC

ESP AKS ESS DSS DSA RK

For conduits

ESD Euro fastening anchor Page 4EC Euro Clip Page 4UVB Universal clamping bracket Page 5EDV Euro twist-on connection Page 5ESV Euro connector lock Page 6GTH Basket Tray Holder Page 6SGC Schnabl Thread Clip Page 6ESP Euro shooting plate Page 7AKS Distance gripper clamp Page 7ESS Single fastening clamp Page 8DSS Double fastening clamp Page 8DSA Double fastening clamp Page 8RK Conduit Claw Page 9

For recessed hoses

TB Terrace bracket Page 13TA Support anchor Page 13USA Recessed clamp autom. Page 14USE Recessed clamp single Page 14USD Recessed clamp double Page 15

DKS DSS DSN MDSN KB KBS

SH SH SHS TB TA TAP

T

Schnabl Stecktechnik GmbHBahnhofplatz 1, po box 63, 3100 St. Pölten, AustriaTelephone +43(0)2742/22167-0, Fax +43(0)2742/[email protected], www.schnabl-steck.com

export product list/1/2016

Documents