ez cubed 34zlc pds

Low Cement Castable Product Data EZ Cubed 34ZLC EZ Cubed 34ZLC is a 1600 o C Zircon based low cement castable which requires no vibration to install. Super high strengths and abrasion resistance are achieved even when the material is mixed to a “Free Flowing” or “Self-Leveling” consistency. Maximum Service Temperature: 2910 o F (1600 o C) Bulk Density: 220 o F (105 o C) 172 lb/ft 3 (2752 kg/m 3 ) 1500 o F (815 o C) 170 lb/ft 3 (2720 kg/m 3 ) Porosity: 15% Cold Crushing Strength: 1500 o F ( 815 o C) 11000-16000 psi ( 770-1120 kg/cm 2 ) 2750 o F (1500 o C) 24000-30000 psi (1680-2100 kg/cm 2 ) Permanent Linear Change(%) : 1500 o F ( 815 o C) 0.0 to -0.3 2000 o F (1095 o C) 0.0 to -0.3 Erosion Loss (ASTM C-704): 1500 o F (815 o C) Less than 7 cc Thermal Conductivity or “K” Factor: Mean Temp. BTU/ft 2 /HR/F/in W/mK 1000 o F ( 540 o C) 11.0 1.59 2000 o F (1095 o C) 10.0 1.44 Typical Chemical Analysis(%): Al 2 O 3 SiO 2 ZrO 2 Fe 2 O 3 TiO 2 CaO Alkalies 34.0 41.5 21.5 0.5 0.8 1.4 0.3 Standard Packaging: 72 - 55 lb. bags per pallet The properties shown on this data sheet represent typical average results generated using standard ASTM test methods (unless otherwise noted) conducted under controlled condition (using standard rectangular shapes), and should not be considered to be guaranteed specifications. Properties are subject to normal manufacturing statistical standard deviation ranges, and Resco Products, Inc. reserves the right to modify the properties and specifications at any time without prior notice. RESCO PRODUCTS disclaims any express or implied warranties based on this sheet. 02/28/08 is the date that this data sheet was updated. Check with your RESCO sales representative or RESCO website to determine you have the current sheet

Upload: salomon-aldape

Post on 30-Sep-2015

215 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

DESCRIPTION

Ez Cubed 34zlc Pds

TRANSCRIPT

Low Cement Castable Product Data

EZ Cubed 34ZLC

EZ Cubed 34ZLC is a 1600oC Zircon based low cement castable which requires no vibration to install. Super high strengths and abrasion resistance are achieved even when the material is mixed to a Free Flowing or Self-Leveling consistency. Maximum Service Temperature: 2910oF (1600oC) Bulk Density: 220oF (105oC) 172 lb/ft3 (2752 kg/m3) 1500oF (815oC) 170 lb/ft3 (2720 kg/m3) Porosity: 15% Cold Crushing Strength: 1500oF ( 815oC) 11000-16000 psi ( 770-1120 kg/cm2) 2750oF (1500oC) 24000-30000 psi (1680-2100 kg/cm2) Permanent Linear Change(%): 1500oF ( 815oC) 0.0 to -0.3 2000oF (1095oC) 0.0 to -0.3 Erosion Loss (ASTM C-704): 1500oF (815oC) Less than 7 cc Thermal Conductivity or K Factor: Mean Temp. BTU/ft2/HR/F/in W/mK 1000oF ( 540oC) 11.0 1.59 2000oF (1095oC) 10.0 1.44 Typical Chemical Analysis(%): Al2O3 SiO2 ZrO2 Fe2O3 TiO2 CaO Alkalies 34.0 41.5 21.5 0.5 0.8 1.4 0.3 Standard Packaging: 72 - 55 lb. bags per pallet The properties shown on this data sheet represent typical average results generated using standard ASTM test methods (unless otherwise noted) conducted under controlled condition (using standard rectangular shapes), and should not be considered to be guaranteed specifications. Properties are subject to normal manufacturing statistical standard deviation ranges, and Resco Products, Inc. reserves the right to modify the properties and specifications at any time without prior notice. RESCO PRODUCTS disclaims any express or implied warranties based on this sheet. 02/28/08 is the date that this data sheet was updated. Check with your RESCO sales representative or RESCO website to determine you have the current sheet