f-vm series kit4500 - geoteck services inc
TRANSCRIPT
KIT4500HYUNDAI WIA Gang Type CNC Turning Center
F-VM SeriesHYUNDAI WIA Vertical Machining Center
F-VM SeriesHYUNDAI WIA Vertical Machining Center
The Vertical Machining Center F-VM Series, designed by Hyundai WIA with years of expertise and the latest technology, maximizes productivity while maintaining high accuracy.
Technical Leader
F400VM [ ] : Option ● : SIEMENS
Table Size mm(in) 1,000×460 (39.4″×18.1″)Max.Load Capacity kg(lb) 600 (1,323)Spindle Taper - BBT40Spindle RPM r/min 8,000 [10,000] [8,000] [10,000]Spindle Output kW(HP) 15 (20.1) [11 (14.8)] [13.5 (18.1)] [13.5 (18.1)] No. of Tools EA 24 [30]Travel (X/Y/Z) mm(in) 800/460/520 (31.5″/18.1″/20.5″)Rapid Traverse Rate m/min(ipm) 36/36/30 (1,417/1,417/1,181)
F500VM [ ] : Option ● : SIEMENS
Table Size mm(in) 1,200×550 (47.2″×21.7″)Max.Load Capacity kg(lb) 800 (1,764)Spindle Taper - BBT40
Spindle RPM r/min 8,000 [8,000] [10,000] [10,000][12,000] [8,000] [10,000]
Spindle Output kW(HP) 15 (20.1) [11 (14.8)] [15 (20.1)] [11 (14.8)][18.5 (24.8)] [13.5 (18.1)] [13.5 (18.1)]
No. of Tools EA 24 [30, 40]Travel (X/Y/Z) mm(in) 1,100/550/520 (43.3″/21.7″/20.5″)Rapid Traverse Rate m/min(ipm) 36/36/30 (1,417/1,417/1,181)
F650VM [ ] : Option ● : HYUNDAI-iTROL
Table Size mm(in) 1,400×670 (55.1″×26.4″)Max.Load Capacity kg(lb) 1,000 (2,205)Spindle Taper - BBT40
Spindle RPM r/min 8,000 [8,000] [10,000] [10,000][8,000] [10,000]
Spindle Output kW(HP) 15 (20.1) [11 (14.8)] [15 (20.1)] [11 (14.8)][13.5 (18.1)] [13.5 (18.1)]
No. of Tools EA 24 [30]Travel (X/Y/Z) mm(in) 1,300/670/635 (51.2″/26.4″/25″)Rapid Traverse Rate m/min(ipm) 36/36/30 (1,417/1,417/1,181)
Advances Technology, Compact Design, Next Generation Vertical Machining Center
F-VM Series● High rigidity design by Finite Element Method structural analysis
● High accuracy headstock featuring high precision Angular Contact Bearing
● High quality machining by dual contact spindle system
● High power, high torque headstock for superb machining performance
● Latest ATC implementation for the quickest tool change
● Extended Y-axis stroke of 550mm(21.7") allows increase in cutting range (F500VM)
● Latest HYUNDAI-iTROL controller with wide range of support softwares
Table & Machining Area
460(18.1″)
460(18.1″)
635(25″)
150(5.9″)
100(3.9″)
800(31.5″)
100(3.9″)
600 kg (1,323 lb)
◉ Table Size (X/Y axis) : 1,000/460 mm (39.4″/18.1″)
01 F400VM Basic FeaturesHigh Speed & Productivity Vertical Machining Center
F-VM Series
Double Anchored Ball ScrewIn order to eliminate thermal growth and increase accuracy, all axes are driven by high precision double anchored ballscrews.
The double anchored and pretensioned design provides outstanding positioning and repeatability with virtually no thermal growth.
Directly Coupled Servo MotorEach axis is directly connected to a highly reliable digital servo motor to provide high rigidity and minimal thermal displacement.
03
02
High Speed LM GuideRapid traverse rate is improved by the use of linear motion guide ways. This reduces non-cutting time and decreases machining time for greater productivity.
01
◉ Rapid Traverse Rate (X/Y/Z axis) : 36/36/30 m/min (1,417/1,417/1,181 ipm)
◉ Travel (X/Y/Z axis) : 800/460/520 mm (31.5″/18.1″/20.5″)
◉ Spindle Speed : 8,000 [10,000] [8,000] [10,000] rpm
◉ Tool Change Time (T-T/C-C) : 1.6/3.3 sec
High Precision & High Speed Vertical Machining Center
04+
05
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Basic Features
01
03
02
Option : [SIEMENS]
02 F500VM Basic FeaturesHigh Speed & Productivity Vertical Machining Center
F-VM Series
Table & Machining Area03
550(21.7″)
635(25″)
150(5.9″)
50(2″)
1,060 (41.7″)
50(2″)
550(21.7″)800 kg (1,764 lb)
◉ Table Size (X/Y axis) : 1,200/550 mm (47.2″/21.7″)
Extended Y-axis Design F500VM has an extended Y-axis stroke of 550mm(21.7″) to increase cutting range.
02
High Speed LM GuideRapid traverse rate is improved by the use of linear motion guide ways. This reduces non-cutting time and decreases machining time for greater productivity.
01
550mm(21.7″)
550(
21.7
″)
500
(19.
7″)
1,100 (43.3″)
Existing model
1,060 (41.7″)
F500VM
•Existing model (X/Y Axis) : 1,060/500 mm (41.7″/19.7″)
•F500VM (X/Y Axis) : 1,100/550 mm (43.3″/21.7″)
◉ Rapid Traverse Rate (X/Y/Z axis) : 36/36/30 m/min (1,417/1,417/1,181 ipm)
◉ Travel (X/Y/Z axis) : 1,100/550/520 mm (43.3″/21.7″/20.5″)
◉ Spindle Speed : 8,000 [8,000] [10,000] [12,000] [8,000] [10,000] rpm
◉ Tool Change Time (T-T/C-C) : 1.3/3.6 sec
High Precision & High Speed Vertical Machining Center
06+
07
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Basic Features
01
0203
Solid Body High ColumnHigh column of 300mm(11.8") is provided.
Option : [SIEMENS]
03 F650VM Basic FeaturesHigh Speed & Productivity Vertical Machining Center
F-VM Series
Table & Machining Area03
670(26.4″)
635(25″)
150(5.9″)
50(2″)
1,300 (51.2″) 50(2″)
670(26.4″)1,000 kg (2,205 lb)
◉ Table Size (X/Y axis) : 1,400/670 mm (55.1″/26.4″)
02
High Speed LM GuideRapid traverse rate is improved by the use of linear motion guide ways. This reduces non-cutting time and decreases machining time for greater productivity.
01
Double Anchored Ball ScrewIn order to eliminate thermal growth and increase accuracy, all axes are driven by high precision double anchored ballscrews.
The double anchored and pretensioned design provides outstanding positioning and repeatability with virtually no thermal growth.
Directly Coupled Servo MotorEach axis is directly connected to a highly reliable digital servo motor to provide high rigidity and minimal thermal displacement.
◉ Rapid Traverse Rate (X/Y/Z axis) : 36/36/30 m/min (1,417/1,417/1,181 ipm)
◉ Travel (X/Y/Z axis) : 1,300/670/635 mm (51.2″/26.4″/25″)
◉ Spindle Speed : 8,000 [8,000] [10,000] [8,000] [10,000] rpm
◉ Tool Change Time (T-T/C-C) : 1.3/3.7 sec
High Precision & High Speed Vertical Machining Center
01
02
03 08+
09
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Basic Features
Option : [HYUNDAI-iTROL]
04 High Precision SpindleLong Lasting High Accuracy & Excellent PerformanceVertical Machining CenterF-VM Series
10+
11
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Spindle
SpindleMaximum spindle speed up to 10,000rpm is possible due to the installation of ultra precision Angular Ball Bearings.
The spindle head is designed to minimize the heat displacement of main spindle, and with the use of a hydraulic tool lock system the machining stability is increased.
Before Clamping After Clamping
Clamping
Non Contact Contact
Axial Movement is Important for Face Contact
Through Spindle CoolantThrough Spindle Coolant is exceedingly useful when drilling deep holes. It helps increase the lifetime of the tool, while decreasing cycle time.
Spindle CoolingThe spindle cooling system minimizes thermal displacement which can happen during lengthy machining operations, and offers continued accuracy based on the thermal stability.
Dual Contact SpindleThe Big Plus spindle system (BBT40) provides dual contact between the spindle face and the flange face of the tool holder.
This greatly increases tool rigidity, reduces run out and adds significant productivity to machining applications.
20 bar / 30 bar / 70 bar (290 psi / 435 psi / 1,015 psi)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
15[20.1]
11[14.8] 95
[70]70[51.6]
8,0003,5001,500
15kW[20.1HP] (30min)
95N∙m[70lbf∙ft] (30min)11kW[14.8HP] (Cont.)
70N∙m[51.6lbf∙ft] (Cont.)
Spindle Speed (r/min)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
Spindle Speed (r/min)0
9[12.1]
11[14.8]
210[154.9]
115[84.8]
8,0006,000500 750
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
15[20.1]
11[14.8]
95[70]
70[51.6]
10,0001,500
Spindle Speed (r/min)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
Spindle Speed (r/min)0
15[20.1]
11[14.8]
18.5[24.8] 117
[86.3]
95.5[70.4]
70[51.6]
12,0001,500 10,000
11kW[14.8HP] (30min)
9kW[12.1HP] (Cont.)
210N∙m[154.9lbf∙ft] (30min)
115N∙m[84.8lbf∙ft] (Cont.)
15kW[20.1HP] (30min)
15kW[20.1HP] (S3 60%)
11kW[14.8HP] (Cont.)
11kW[14.8HP] (Cont.)
95N∙m[70lbf∙ft] (30min)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
7.5[10]
11[14.8]
48[35.4]36[26.6]
70[51.6]
10,0001,500 2,000 4,500
Spindle Speed (r/min)
18.5kW[24.8HP] (S3 25%)117N∙m[86.3lbf∙ft] (S3 25%)
95.5N∙m[70.4lbf∙ft] (S3 60%)
70N∙m[51.6lbf∙ft] (Cont.)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
Spindle Speed (r/min)0
15[20.1]
18.5[24.8] 117
[86.3]
95[70]
8,0001,50035
15kW[20.1HP] (Cont.)
18.5kW[24.8HP] (30min)117N∙m[86.3lbf∙ft] (30min)
95N∙m[70lbf∙ft] (Cont.)
70N∙m[51.6lbf∙ft] (Cont.)
11kW[14.8HP] (S3)
7.5kW[10HP] (S1)70N∙m[51.6lbf∙ft] (S3)
48N∙m[35.4lbf∙ft] (Cont.)
36N∙m[26.6lbf∙ft] (S1)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
13.5[18.1]
9[12.1] 95
[70]
63[46.5]
10,0004,5003,5001,500
Spindle Speed (r/min)
13.5kW [18.1HP] (S6-40%)
9kW [12.1HP] (Cont.)
95N.m[70lbf∙ft] (S6-40%)
63N.m[46.5lbf∙ft] (Cont.)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
13.5[18.1]
9[12.1] 95
[70]
63[46.5]
8,0004,5003,5001,500
Spindle Speed (r/min)
13.5kW [18.1HP] (S6-40%)
9kW [12.1HP] (Cont.)
95N.m[70lbf∙ft] (S6-40%)
63N.m[46.5lbf∙ft] (Cont.)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
15[20.1]
11[14.8] 95
[70]70[51.6]
8,0003,5001,500
15kW[20.1HP] (30min)
95N∙m[70lbf∙ft] (30min)11kW[14.8HP] (Cont.)
70N∙m[51.6lbf∙ft] (Cont.)
Spindle Speed (r/min)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
Spindle Speed (r/min)0
9[12.1]
11[14.8]
210[154.9]
115[84.8]
8,0006,000500 750
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
15[20.1]
11[14.8]
95[70]
70[51.6]
10,0001,500
Spindle Speed (r/min)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
Spindle Speed (r/min)0
15[20.1]
11[14.8]
18.5[24.8] 117
[86.3]
95.5[70.4]
70[51.6]
12,0001,500 10,000
11kW[14.8HP] (30min)
9kW[12.1HP] (Cont.)
210N∙m[154.9lbf∙ft] (30min)
115N∙m[84.8lbf∙ft] (Cont.)
15kW[20.1HP] (30min)
15kW[20.1HP] (S3 60%)
11kW[14.8HP] (Cont.)
11kW[14.8HP] (Cont.)
95N∙m[70lbf∙ft] (30min)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
7.5[10]
11[14.8]
48[35.4]36[26.6]
70[51.6]
10,0001,500 2,000 4,500
Spindle Speed (r/min)
18.5kW[24.8HP] (S3 25%)117N∙m[86.3lbf∙ft] (S3 25%)
95.5N∙m[70.4lbf∙ft] (S3 60%)
70N∙m[51.6lbf∙ft] (Cont.)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
Spindle Speed (r/min)0
15[20.1]
18.5[24.8] 117
[86.3]
95[70]
8,0001,50035
15kW[20.1HP] (Cont.)
18.5kW[24.8HP] (30min)117N∙m[86.3lbf∙ft] (30min)
95N∙m[70lbf∙ft] (Cont.)
70N∙m[51.6lbf∙ft] (Cont.)
11kW[14.8HP] (S3)
7.5kW[10HP] (S1)70N∙m[51.6lbf∙ft] (S3)
48N∙m[35.4lbf∙ft] (Cont.)
36N∙m[26.6lbf∙ft] (S1)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
13.5[18.1]
9[12.1] 95
[70]
63[46.5]
10,0004,5003,5001,500
Spindle Speed (r/min)
13.5kW [18.1HP] (S6-40%)
9kW [12.1HP] (Cont.)
95N.m[70lbf∙ft] (S6-40%)
63N.m[46.5lbf∙ft] (Cont.)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
13.5[18.1]
9[12.1] 95
[70]
63[46.5]
8,0004,5003,5001,500
Spindle Speed (r/min)
13.5kW [18.1HP] (S6-40%)
9kW [12.1HP] (Cont.)
95N.m[70lbf∙ft] (S6-40%)
63N.m[46.5lbf∙ft] (Cont.)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
15[20.1]
11[14.8] 95
[70]70[51.6]
8,0003,5001,500
15kW[20.1HP] (30min)
95N∙m[70lbf∙ft] (30min)11kW[14.8HP] (Cont.)
70N∙m[51.6lbf∙ft] (Cont.)
Spindle Speed (r/min)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
Spindle Speed (r/min)0
9[12.1]
11[14.8]
210[154.9]
115[84.8]
8,0006,000500 750
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
15[20.1]
11[14.8]
95[70]
70[51.6]
10,0001,500
Spindle Speed (r/min)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
Spindle Speed (r/min)0
15[20.1]
11[14.8]
18.5[24.8] 117
[86.3]
95.5[70.4]
70[51.6]
12,0001,500 10,000
11kW[14.8HP] (30min)
9kW[12.1HP] (Cont.)
210N∙m[154.9lbf∙ft] (30min)
115N∙m[84.8lbf∙ft] (Cont.)
15kW[20.1HP] (30min)
15kW[20.1HP] (S3 60%)
11kW[14.8HP] (Cont.)
11kW[14.8HP] (Cont.)
95N∙m[70lbf∙ft] (30min)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
7.5[10]
11[14.8]
48[35.4]36[26.6]
70[51.6]
10,0001,500 2,000 4,500
Spindle Speed (r/min)
18.5kW[24.8HP] (S3 25%)117N∙m[86.3lbf∙ft] (S3 25%)
95.5N∙m[70.4lbf∙ft] (S3 60%)
70N∙m[51.6lbf∙ft] (Cont.)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
Spindle Speed (r/min)0
15[20.1]
18.5[24.8] 117
[86.3]
95[70]
8,0001,50035
15kW[20.1HP] (Cont.)
18.5kW[24.8HP] (30min)117N∙m[86.3lbf∙ft] (30min)
95N∙m[70lbf∙ft] (Cont.)
70N∙m[51.6lbf∙ft] (Cont.)
11kW[14.8HP] (S3)
7.5kW[10HP] (S1)70N∙m[51.6lbf∙ft] (S3)
48N∙m[35.4lbf∙ft] (Cont.)
36N∙m[26.6lbf∙ft] (S1)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
13.5[18.1]
9[12.1] 95
[70]
63[46.5]
10,0004,5003,5001,500
Spindle Speed (r/min)
13.5kW [18.1HP] (S6-40%)
9kW [12.1HP] (Cont.)
95N.m[70lbf∙ft] (S6-40%)
63N.m[46.5lbf∙ft] (Cont.)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
13.5[18.1]
9[12.1] 95
[70]
63[46.5]
8,0004,5003,5001,500
Spindle Speed (r/min)
13.5kW [18.1HP] (S6-40%)
9kW [12.1HP] (Cont.)
95N.m[70lbf∙ft] (S6-40%)
63N.m[46.5lbf∙ft] (Cont.)
Continuous variable transmitting is possible due to the use of AC conversion motor, and the consistent spindle rotation function is set as a standard function.
FANUC Spindle Motor
F400VM/500VM/650VM (8,000rpm)
F500VM/650VM (8,000rpm)
F500VM (Direct 12,000rpm)
F400VM/500VM/650VM (10,000rpm)
F500VM/650VM (10,000rpm)
Machining Capability
Spindle
12+
13
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
The 1PH8 Series Motor is a high quality and performance motor with the characteristics of maximum concentricity of 10㎛ and short driving time.
❖ The above results might be different by types of processing circumstances.
FACE MILL 〈Material〈JIS〉:S45C(Carbon steel)〉
Tool diameterCutting depthCutting widthCutting speedSpindle rpmFeed rateChip quantity
Ø80 (Ø3.15″) x 6F4.3 mm (0.17″)64 mm (2.52″)1,500 mm/min (59 ipm)1,500 r/min1,350 mm/min (53.15 ipm)432 cc/min
DRILL 〈Material〈JIS〉:S45C(Carbon steel)〉
Tool diameterCutting depthCutting speedSpindle rpmFeed rateChip quantity
Ø40 (Ø1.57″) x MT340 mm (1.57″)27 mm/min (1.06 ipm)214 r/min42.8 mm/min (1.68 ipm)54 cc/min
TAP. 〈Material〈JIS〉:S45C(Carbon steel)〉
Tap spec./PitchCutting depthCutting speedSpindle rpmFeed rate
M30 x P3.540 mm (1.57″)7 mm/min (0.27 ipm)212 r/min742 mm/min (29.2 ipm)
F400/500VM F650VMFACE MILL 〈Material〈JIS〉:S45C(Carbon steel)〉
Tool diameterCutting depthCutting widthCutting speedSpindle rpmFeed rateChip quantity
Ø80 (Ø3.15″) x 6F2.5 mm (0.098″)64 mm (2.52″)1,500 mm/min (59 ipm)1,500 r/min2,700 mm/min (106.3 ipm)432 cc/min
DRILL 〈Material〈JIS〉:S45C(Carbon steel)〉
Tool diameterCutting depthCutting speedSpindle rpmFeed rateChip quantity
Ø32 (Ø1.25″)40 mm (1.57″)24 mm/min (0.94 ipm)268 r/min 53 mm/min (2.08 ipm)43 cc/min
TAP. 〈Material〈JIS〉:S45C(Carbon steel)〉
Tap spec./PitchCutting depthCutting speedSpindle rpmFeed rate
M30 x P3.540 mm (1.57″)8 mm/min (0.31 ipm)212 r/min742 mm/min (29.2 ipm)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
15[20.1]
11[14.8] 95
[70]70[51.6]
8,0003,5001,500
15kW[20.1HP] (30min)
95N∙m[70lbf∙ft] (30min)11kW[14.8HP] (Cont.)
70N∙m[51.6lbf∙ft] (Cont.)
Spindle Speed (r/min)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
Spindle Speed (r/min)0
9[12.1]
11[14.8]
210[154.9]
115[84.8]
8,0006,000500 750
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
15[20.1]
11[14.8]
95[70]
70[51.6]
10,0001,500
Spindle Speed (r/min)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
Spindle Speed (r/min)0
15[20.1]
11[14.8]
18.5[24.8] 117
[86.3]
95.5[70.4]
70[51.6]
12,0001,500 10,000
11kW[14.8HP] (30min)
9kW[12.1HP] (Cont.)
210N∙m[154.9lbf∙ft] (30min)
115N∙m[84.8lbf∙ft] (Cont.)
15kW[20.1HP] (30min)
15kW[20.1HP] (S3 60%)
11kW[14.8HP] (Cont.)
11kW[14.8HP] (Cont.)
95N∙m[70lbf∙ft] (30min)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
7.5[10]
11[14.8]
48[35.4]36[26.6]
70[51.6]
10,0001,500 2,000 4,500
Spindle Speed (r/min)
18.5kW[24.8HP] (S3 25%)117N∙m[86.3lbf∙ft] (S3 25%)
95.5N∙m[70.4lbf∙ft] (S3 60%)
70N∙m[51.6lbf∙ft] (Cont.)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
Spindle Speed (r/min)0
15[20.1]
18.5[24.8] 117
[86.3]
95[70]
8,0001,50035
15kW[20.1HP] (Cont.)
18.5kW[24.8HP] (30min)117N∙m[86.3lbf∙ft] (30min)
95N∙m[70lbf∙ft] (Cont.)
70N∙m[51.6lbf∙ft] (Cont.)
11kW[14.8HP] (S3)
7.5kW[10HP] (S1)70N∙m[51.6lbf∙ft] (S3)
48N∙m[35.4lbf∙ft] (Cont.)
36N∙m[26.6lbf∙ft] (S1)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
13.5[18.1]
9[12.1] 95
[70]
63[46.5]
10,0004,5003,5001,500
Spindle Speed (r/min)
13.5kW [18.1HP] (S6-40%)
9kW [12.1HP] (Cont.)
95N.m[70lbf∙ft] (S6-40%)
63N.m[46.5lbf∙ft] (Cont.)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
0
13.5[18.1]
9[12.1] 95
[70]
63[46.5]
8,0004,5003,5001,500
Spindle Speed (r/min)
13.5kW [18.1HP] (S6-40%)
9kW [12.1HP] (Cont.)
95N.m[70lbf∙ft] (S6-40%)
63N.m[46.5lbf∙ft] (Cont.)
SIEMENS 1PH8 Servo Motor
F400VM/500VM/650VM (8,000rpm) F400VM/F500VM/F650VM (10,000rpm)
05 ATC & MagazineHigh Productivity Achieved with High Rigidity, Accuracy MachiningF-VM Series
◉ No. of Tools : 24 [30] EA ◉ Tool Shank : BBT40◉ Max. Tool Length : 300 mm (11.8 ″) ◉ Max. Tool Weight : 8 kg (18 lb)
◉ Max. Tool Dia. (W.T/W.O) : F400VM - Ø76/Ø150 (Ø3″/Ø5.9″) F500/650VM - Ø90/Ø150(Ø3.5″/Ø5.9″)
Peripheral Device
MagazineThe tool magazine holds 24 tools as standard and 30 tools as an option.Random access allows faster tool change and increase in productivity.
F500VM : 40 TOOL (Max. Tool Dia. : Ø76 (Ø3″)
Servo ATCPosition control of Twin Arm ATC using Servo Motors has been improved drastically. In addition, tool changing has become faster, reducing non-cutting time.
24 Tool Magazine
30 Tool Magazine
◉ ATC Speed Improvement
28% reduction 2.6% reduction
Before
After
Before
After
1.8 sec 3.8 sec
1.3 sec 3.7 sec
F650VM (Tool to Tool) F650VM (Chip to Chip)
28% reduction 5.3% reduction
Before
After
Before
After
1.8 sec 3.8 sec
1.3 sec 3.6 sec
F500VM (Tool to Tool) F500VM (Chip to Chip)
14+
15
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
HW-AFCHYUNDAI WIAAdaptive Feed Control
Software that controls the feed automatically to maintain a certain working load to extend tool life as well as productivity.
(FANUC)HW-MCSHYUNDAI WIAMachining Condition Selection
Software that automatically sets cutting and feeding parameters according to the machining types (speed, degree, quality)
Mold-related Software
(FANUC)
Intelligent Machining
Machine Monitoring
High Precision
High Productivity Energy Savin
g
HW-TM | HW-MCS | HW-A
FC
HW-TOM HW-ESS
User Friendly
HW-MMSHW-TDC | HW
-WARM
UP
HYUNDAI WIA Smart System for Vertical Machining Center
User Convenience
HW-eDNC
HW-MCG
Faster processing and enhanced accuracy in are possiblethrough the HYUNDAI WIA Smart System. The user friendly software and equipment monitoring of the Smart System maximizes productivity.
06 Smart SystemSoftware for smart operating and machiningF-VM Series
HW-TDCHYUNDAI WIA Thermal Displacement Compensation
Software that measures the changes in the external environment as well as heat emission during processing to help reduce thermal displacement.
HW-ESSHYUNDAI WIAEnergy Saving System
An environmental friendly software that reduces the unnecessarily wasted standby power waiting for an operation.
HW-MCGHYUNDAI WIAMachine Guidance
Software that offers operation, maintenance, management monitoring and various user friendly features.
HW-WARMUPHYUNDAI WIAWARMing Up
Warm-up software that measures main spindle halt and offers system warm-up time automatically.
HW-TOMHYUNDAI WIATool Offset Measurement
User friendly GUI software that indicates tool length, diameter, and damage (H/W excluded)
HW-MMS
RemoteSystem
Smart Factory HW-MMS (HYUNDAI WIA-Machine Monitoring System)
A brand new manufacturing machine by HYUNDAI WIA, HW-MMS is a unique software capable of monitoring the operation status of manufacturing machines in factories, a smart solution to improve manufacturing conditions of customers.
01 05
04
03
Real-time monitoring of machine operation status (Cloud)
History and statistics of machine operation (Cloud)
History and statistics of alarm occurrence (Cloud)
History and statistics of work count (Cloud)
Remote diagnosis (Remote)
01
05
04
03
02
02
HW-TMHYUNDAI WIATool Monitoring
A tool monitoring software which analyzes the load of the spindle motor to determine and monitor possible damage of tools.
(FANUC)
(FANUC) (FANUC)
16+
17
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
HYUNDAI WIA Smart System
DIFFERENTIATED CAPABILITIES, INTEGRATED ENGINEERING PERFECTLY INTERLINKEDSIEMENS 828D is a latest model CNC. It is designed for horizontal/vertical all-purpose equipment.
Its 80-bit control reduces processing time and increases productivity. The 828D is easy to maintain and run, with its easy setup functions.
07 SIEMENS ControllerSoftware for smart operating and machining
F-VM Series
• Dialogue-type programming, simple and convenient
• Effective specifications for small quantity batch production
• Step-by-step operation possible without knowledge of the DIN/ISO code
Shop Mill
• 3D confirmation of the completed processing configuration of the NC program is possible.
•Offers standards for 2D simulation.• Possible to confirm the simulation of the
NC grogram during processing.
3D Simulation
• Easy to install/uninstall an option (Ex : barfeeder and chip conveyor, etc.)
• Possible to install in one motion without revision of individual perimeters.
• A spate list is unnecessary as option items are indicated with letters.
Easy Extend
Easy input/output of a program is possible as a USB memory card, a CF memory card and LAN can all be used.
Variable Communication Port
RJ 45 Ethernet
USB 2.0
Compact Flash Card
If the ISO Dialect (G291) is ordered, JIS-based G-code programs can be used. (Standard)
SIEMENS Technology SIEMENS Communication
ISO CodeProgramming
SIEMENS 828D comes with Advanced Surface, metal processing software that monitors speed and accuracy.
18+
19
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
SIEMENS
SIEMENS Advanced Surface
Speed
Speed
SINUMERIK + SINAMICS 80bit NANO FP Accuracy
Machining Time Time : 48 min
Unblanced Velocity
Machining Time Time : 33 min
Blanced Velocity
08 HYUNDAI-iTROLThe Powerful CNC platform for Machine Tools
F-VM Series
HYUNDAI Intelligent ControlConvenient and Easy-to-Use Machine Tool...
Hyundai WIA take operator convenience to a higher level with the new controller, HYUNDAI-iTROL. Experience the new operating environment with HYUNDAI-iTROL.
20+
21
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
When power is on, HYUNDAI-iTROL gives the worker instructions to do warm-up. HYUNDAI-iTROL also informs the worker of machine problems beforehand by showing current machine status.
Smart System operation preperation
The three essential operations for machining are program check, tool measurement and coordinates system setup. HYUNDAI-iTROL provides three operations in consecutive order to prevent error and to enable quick and easy setup.
Quick & Easy Machining Support
Tool and spindle monitoring can be easily done with a simpler operation. This helps with tool management, spindle protection and factory automation.
Tool & Spindle Monitoring
Easy input/output of program is possible with the use of USB memory card, CF memory card and LAN.
COMMUNICATION FUNCTION
RJ 45 Ethernet
USB 2.0
Compact Flash Card
You can use energy saving function (ECO) and machining optimization function (SMART) with the MCP button.
iTROL TechnologyiTROL Convenient Function
Controller
Dynamic servo control, highly efficient Siemens servo drive and Siemens servo motor with durability and
quick response have been applied.
User ConvenienceVarious Devices for User Convenience
Hydraulic Supply UnitInstead of the standard hydraulic supply unit, an optional fixture unit can bring the pressure up to 100 bar(1,450 psi), maximizing the clamping force on the fixture.
NC Rotary TableThe NCRT makes it possible to machine up to 5-axis. Various types of products can be machined.
U-CenterWith U-Center, both external and internal diameter turning become possible, allowing for a wide range of variety in products.
Measuring Device
Hydraulic Device
Precision Device
09F-VM Series
Touch SensorWorkpiece coordinate values can be set automatically using the optional spindle probe.
TLM - Laser & TouchTool lengths and diameters can be set automatically using the optional tool setter. This can also be used to monitor tool attrition and detect broken tools.
Laser Type
Touch Type
Chip Disposal Process (F650VM)
Optional
•Hinge Belt Type : Highly efficient when disposing a lot of chips. Capable of handling stringy chips. (Long Chip)
•Scraper Type : Convenient for shortly cut chips.. (Short Chip)•Drum Filter Type : Advantageous in precision, as the chips do not flow in to the coolant nozzle. (AL Chip)
Timely and effective disposal of chips will enhance productivity as well as the working environment.
22+
23
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Chip Conveyor Front (Left)
Chip Conveyor Rear (Left)
Chip Conveyor
Gantry Loader SystemImplementation of high speed gantry loaders is possible as well as the construction of flexible automation cells by a work stocker. Optimization of the installation space is also possible.
Work Stocker
Std. Coolant (Nozzle)
Bed Flushing Coolant
Through Spindle Coolant
(20/30/70 bar [290/435/1,015 psi)
Jet Coolant
Gun Coolant
Side Oil Hole Coolant
Standard
Standard
Option
Option
Option
Option
Coolant Unit (F650VM Std.)
Standard & Optional ● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
Through Spindle Coolant* : Please check the filter types with sales representative.Specifications are subject to change without notice for improvement.
Spindle F400VM F500VM F650VM
8,000rpm (15/11kW[20.1/14.8HP]) FANUC ● ● ●
8,000rpm (11/9kW[14.8/12.1HP]) FANUC - ○ ○
10,000rpm (15/11kW[24.8/14.8HP]) FANUC - ○ ○
10,000rpm (11/7.5kW[14.8/10HP])) FANUC ○ ○ ○
12,000rpm (18.5/11kW[24.8/14.8HP]) FANUC (Direct) - ○ -
8,000rpm(13.5/9kW[18/12.1HP]) SIEMENS/iTROL ○ ○ ○
10,000rpm(13.5/9kW[18/12.1HP]) SIEMENS/iTROL ○ ○ ○
Spindle Cooling System Std. rpm ○ ○ ○ATC
ATC Extension24 ● ● ●30 ○ ○ ○40 - ○ -
Tool Shank TypeBBT40 ● ● ●CAT40, VCD40 ○ ○ ○HSK63 - - -
U-Center D'andrea ☆ ☆ ☆
Pull Stud45° ● ● ●60° - - -90° - - -
Table & ColumnAPC - - -Tap Type Table ☆ ☆ ☆T-Slot Table ● ● ●NC Rotary Table ☆ ☆ ☆High Column 300mm (11.8″) ○ ○ ☆Coolant SystemStd. Coolant (Nozzle) ● ● ●Bed Flushing Coolant ● ● ●
Through Spindle Coolant*
20bar (290 psi) ○ ○ ○30bar (435 psi), 20ℓ(5.3gal) ○ ○ ○
70bar (1,015 psi),15ℓ(3.9gal) ○ ○ ○
70bar (1,015 psi),30ℓ(7.9gal) ○ ○ ○
Top Cover ● ● ●Shower Coolant ○ ○ ○Gun Coolant ○ ○ ○Side Oil Hole Coolant ○ ○ ○Air Gun ○ ○ ○Cutting Air Blow ○ ○ ○Tool Measuring Air Blow (Only for TLM) ○ ○ ○Air Blow for Automation ☆ ☆ ☆Thru MQL Device (Without MQL) ☆ ☆ ☆Coolant Chiller ☆ ☆ ☆Power Coolant System (For Automation) ☆ ☆ ☆Chip Disposal
Coolant Tank350ℓ(92.5 gal) ● - -450ℓ(118.9 gal) - ● ●520ℓ(137.4 gal) - - -
Chip Conveyor(Hinge/Scraper)
Left(Rear) ○ ○ ○Left(Left) ○ ○ ○
Special Chip Conveyor (Drum Filter) ☆ ☆ ☆
Chip Wagon
Standard(180ℓ[47.5 gal]) ○ ○ ○
Swing(200ℓ[52.8 gal]) ○ ○ ○
Large Swing(290ℓ[76.6 gal]) ○ ○ ○
Large Size(330ℓ[87.2 gal]) ☆ ○ ○
Customized ☆ ☆ ☆
S/W F400VM F500VM F650VMMachine guidance (HW-MCG) : FANUC/SIEMENS ☆/- ☆/- ☆Tool Monitoring (HW-TM) ○ ○ ○DNC Software (HW-eDNC) ○ ○ ○Spindle Heat Distortion Compensation (HW-TDC) ○ ○ ○Spindle Warm up Function (HW-WARMUP) : FANUC/SIEMENS ☆/- ☆/- ☆Energy Saving System (HW-ESS) : FANUC/SIEMENS ☆/- ☆/- ☆Machine Monitoring System (HW-MMS) ○ ○ ○Tool Offset Measurement (HW-TOM) ☆ ☆ ☆Machining Condition Selection (HW-MCS) : FANUC/SIEMENS ☆/- ☆/- ☆Adaptive Feed Control (HW-AFC) : FANUC/SIEMENS ☆/- ☆/- ☆Conversational Program (HW-DPRO) ○ ○ ○Electric DeviceCall Light 1 Color : ■ ● ● ●Call Light 2 Color : ■■ ○ ○ ○Call Light 3 Color : ■■■ ○ ○ ○Call Light & Buzzer 3 Color : ■■■B ○ ○ ○Work Light ● ● ●Electric Cabinet Light ○ ○ ○Remote MPG ● ● ●
3 Axis MPGFANUC ○ ○ ○SIEMENS/iTROL ○ ○ ○
Work Counter Digital ○ ○ ○Total Counter Digital ○ ○ ○Tool Counter Digital ○ ○ ○
Multi Tool Counter6 EA ○ ○ ○9 EA ○ ○ ○
Electric Circuit Breaker ○ ○ ○AVR (Auto Voltage Regulator) ☆ ☆ ☆
Transformer25kVA ○ ○ -30kVA - - ○
Auto Power Off ○ ○ ○Back up Module for Black out ○ ○ ○Measuring Device
Air ZeroTACO ○ ○ ○SMC ○ ○ ○
Work Measuring Device ○ ○ ○TLM(Marposs/Renishaw/Blum)
Touch ○ ○ ○Laser ○ ○ ○
Tool Broken Detective Device ☆ ☆ ☆Linear Scale X/Y/Z Axis ○ ○ ○Coolant Level Sensor (Only for Chip Conveyor, Bladder Type) ☆ ☆ ☆
EnviornmentAir Conditioner ○ ○ ○Dehumidifier ○ ○ ○Oil Mist Collector ☆ ☆ ☆Oil Skimmer (Only for Chip Conveyor) ○ ○ ○MQL (Minimal Quantity Lubrication) ☆ ☆ ☆Fixture & Automation
Auto DoorStd. ○ ○ ○High Speed ☆ ☆ ☆
Auto Shutter (Only for Automatic System) ☆ ☆ ☆Sub O/P ☆ ☆ ☆
NC Rotary TableI/FSingle ○ ○ ○Channel ☆ ☆ ☆
Control of Additional Axis1Axis ○ ○ ○2Axis ☆ ☆ ☆
External M Code 4ea ○ ○ ○Automation Interface ☆ ☆ ☆
I/O Extension (In & Out)16 Contact ○ ○ ○32 Contact ○ ○ ○
Hyd. Device
Std. Hyd. Unit
45bar (653 psi) ○ ○ ○70bar (1,015 psi) ○ ○ ○100bar (1,450 psi) ○ ○ ○Customized ☆ ☆ ☆
ETCTool Box ● ● ●Customized Color Need for Munsel No. ☆ ☆ ☆CAD&CAM Software ☆ ☆ ☆
SPECIFICATIONS
unit : mm(in)External Dimensions
SPECIFICATIONS
F400VM
1305 (51.3)1305 (51.3)
460(18.1) 52
0 (2
0.4)
3853 (151.7)
349
(13.
7)25
24 (9
9.4)
1243 (48.9)
1050
(41.
3)67
8 (2
6.7)
519
(20.
4)18
8(7
.4)
1360 (53.5)560 (22)1005 (39.6)
970
(38.
2)23
0(9
)51
0 (2
0)
909
(35.
8)13
0(5
.1)
(Z-S
TRO
KE
)
(X-STROKE)230 (9)
(X-STROKE)230 (9)
400 (15.7) 1000 (39.3) 400 (15.7)
328
(12.
9)30
7(1
2)15
40 (6
0.6)
24+
25
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
unit : mm(in)External Dimensions
SPECIFICATIONS
F500VM
3100 (122)
345
(13.
6)16
55 (6
1.5)
500
(19.
6)
2500
(98.
4)
510
(20)
1490
(58.
6)
458
(18)
2000
(78.
7)
545 (21.4)1310 (51.5)1245 (49)
1185 (46.6)(DOOR OPEN)
1036 (40.7)
970
(38.
1)23
0(9
)
1200
(47.
2)27
0(1
0.6)
1050
(41.
3)17
0(6
.7)
1710
(67.
3)
328(12.9)
3220 (126.7)
4256 (167.5)
2172 (85.5)947 (37.2)
unit : mm(in)External Dimensions
26+
27
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
SPECIFICATIONS
F650VM
850 (33.4)
920 (36.2)
1140 (44.9) 850 (33.4) 900 (35.4)900 (35.4)
2465
(97)
2000
(78.
7)
395
(15.
5)
967
(38)
230
(9)
2860
(112
.5)
3500 (137.8)
785 (31) 1805 (71)
2590 (102)
700(27.5)(DOOR STROKE)
700(27.5)(DOOR STROKE)
70(2.7)70(2.7)80(3.1)
979
(38.
5)23
0(9
)
unit : mm(in)Table Dimensions
SPECIFICATIONS
400 (15.7)100(3.9)
100(3.9)
400 (15.7)
1000 (39.4)
42.5
(1.7
)42
.5(1
.7)
125
(4.9
)12
5(4
.9)
125
(4.9
)
230
(9)
230
(9)Ø61
0(Ø
24)
Ø536
(Ø21.1)
Ø460
(Ø18.1)
226.5 (8.9)
39.9
4(1
.6)
397.95(15.7)
Ø460
(Ø18
.1)Ø57
5 (Ø
22.6
)
105.
53(4
.2)
87.5
(3.4
)87
.5(3
.4)
125
(4.9
)12
5(4
.9)
125
(4.9
)
550
(21.
6)
50(1.9)
1100 (43.3) 50(1.9)
Center
Center
1300 (51.2)
1400 (55.1)
50(2)
50(2)
670
(26.
4)
85 (3.3
)12
5(4
.9)
125
(4.9
)12
5(4
.9)
125
(4.9
)85 (3.3
)
Ø460
(Ø18
.1)Ø57
5 (Ø
22.6
)
52.7
(2.1
)
173.9(6.8)
18 H12 +0.180 0.000
C1
18 H8 +0.027 0.000
20 (0.8
)12 (0.5
)
C1
30 (1.2)
T-SLOT DETAIL
T-SLOT DETAIL CENTER
Center
20 (0.8
)12 (0.5
)
30 (1.2)
F650VM
F500VM
F400VM
Ø63
(Ø2.
48″)
65.4 (2.57)
6(0.24)
27(1.06)
2 (0.08)
Ø44
.45
(Ø1.
75″)
35 (1.38)
29(1.14)
Ø15
(Ø0.
59)
60°
45°
16.6 (0.65)
7/24
M16
Ø10
(Ø0.
39)
10(0.39)
1 (0.04)(BBT40)
(BT40)
(BCV40)
(CAT40)
BT40/BBT40, BIG PLUS
60°
45°
CAT40/BCV40
Ø63
.5 (2
.5)
15 (0
.59)
25(0.984)
25(0.984)
16.3
83(0
.645
)
68.25 (2.687)15.8 (0.625)
19.05 (0.75)
3.2 (0.125)
1 (0.04) 7/24
32.15(1.266)
5/8″-11
Ø44
.5 (1
.75)
22.6(0.88)
16.1
(0.6
3)
Ø4
(Ø0.
15)
Ø3
(Ø0.
11)
Ø5
(Ø0.
19)
11.5(0.45)3
(0.11)
P5
16.1
(0.6
3)
Ø4
(Ø0.
15)
Ø3
(Ø0.
11)
Ø5
(Ø0.
19)
11.5(0.45)3
(0.11)
P5
ThroughCoolant
ThroughCoolant
Ø63
(Ø2.
48″)
65.4 (2.57)
6(0.24)
27(1.06)
2 (0.08)
Ø44
.45
(Ø1.
75″)
35 (1.38)
29(1.14)
Ø15
(Ø0.
59)
60°
45°
16.6 (0.65)
7/24
M16
Ø10
(Ø0.
39)
10(0.39)
1 (0.04)(BBT40)
(BT40)
(BCV40)
(CAT40)
BT40/BBT40, BIG PLUS
60°
45°
CAT40/BCV40
Ø63
.5 (2
.5)
15 (0
.59)
25(0.984)
25(0.984)
16.3
83(0
.645
)
68.25 (2.687)15.8 (0.625)
19.05 (0.75)
3.2 (0.125)
1 (0.04) 7/24
32.15(1.266)
5/8″-11
Ø44
.5 (1
.75)
22.6(0.88)
16.1
(0.6
3)
Ø4
(Ø0.
15)
Ø3
(Ø0.
11)
Ø5
(Ø0.
19)
11.5(0.45)3
(0.11)
P5
16.1
(0.6
3)
Ø4
(Ø0.
15)
Ø3
(Ø0.
11)
Ø5
(Ø0.
19)
11.5(0.45)3
(0.11)
P5
ThroughCoolant
ThroughCoolant
unit : mm(in)Tool Shank
SPECIFICATIONS
28+
29
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Specifications [ ] : Option
SPECIFICATIONS
❖ F400VM Spindle [Option]Spindle RPM : [10,000] [8,000] [10,000] rpm Spindle Power Output (Max./Cont.) : [11/7.5] [13.5/9] [13.5/9] kW ([14.8/10] [18.1/12.1] [18.1/12.1] HP)Spindle Torque (Max./Cont.) : [70/48] [95/63] [95/63] N·m ([51.6/35.4] [70/46.5] [70/46.5] lbf·ft)
❖ F500VM Spindle [Option]Spindle RPM : [8,000] [10,000] [10,000] [12,000] [8,000] [10,000] rpm Spindle Power Output (Max./Cont.) : [11/9] [15/11] [11/7.5] [18.5/11] [13.5/9] [13.5/9] kW ([14.8/12.1] [20.1/14.8] [14.8/10] [24.8/10] [18.1/12.1] [18.1/12.1] HP) Spindle Torque (Max./Cont.) : [210/115] [95/70] [70/48] [117/70] [95/63] [95/63] N·m ([154.9/84.8] [70/51.6] [51.6/35.4] [86.3/51.6] [70/46.5] [70/46.5] lbf·ft)
❖ F650VM Spindle [Option]Spindle RPM : [8,000] [10,000] [10,000] [8,000] [10,000] rpm Spindle Power Output (Max./Cont.) : [11/9] [15/11] [11/7.5] [13.5/9] [13.5/9] kW ([14.8/12.1] [20.1/14.8] [14.8/10] [18.1/12.1] [18.1/12.1] HP)Spindle Torque (Max./Cont.) : [210/115] [95/70] [70/48] [95/63] [95/63] N·m ([154.9/84.8] [70/51.6] [51.6/35.4] [70/46.5] [70/46.5] lbf·ft)
ITEM F400VM F500VM F650VM
TABLE
Table Size mm(in) 1,000x460 (39.4″x18.1″) 1,200x550 (47.2″x21.7″) 1,400x670 (55.1″x26.4″)
Maximum Load Capacity kg(lb) 600 (1,323) 800 (1,764) 1,000 (2,205)
Table Change Time sec -
Change Method - -
Table Driving Method - -
SPINDLE
Spindle Taper - NT #40
Spindle RPM r/min ❖ 8,000 [Option] ❖ 8,000 [Option] ❖ 8,000 [Option]
Spindle Power Output (Max./Cont.) kW(HP) 15/11 (20.1/14.8) [Option] 15/11 (20.1/14.8) [Option] 15/11 (20.1/14.8) [Option]
Spindle Torque (Max./Cont.) N·m(lbf·ft) 95/70 (70/51.6) [Option] 95/70 (70/51.6) [Option] 95/70 (70/51.6) [Option]
Spindle Driving Method - BELT [F500VM 12K : DIRECT]
FEED
Travel (X/Y/Z) mm(in)800/460/520
(31.5″/18.1″/20.5″)1,100/550/520
(43.3″/21.7″/20.5″)1,300/670/635
(51.2″/26.4″/25″)
Distance from Table Surface to SP mm(in) 130~650 (5.1″~25.5″) 150~670 (5.9″~26.4″) 100~735 (3.9″~28.9″)
Distance from Column to SP. center mm(in) 475 (18.7″) 620 (24.4″) 717 (28.2″)
Rapid Traverse Rate (X/Y/Z) m/min(ipm) 36/36/30 (1,417/1,417/1,181)
Slide Type - LM GUIDE
ATC
Number of Tools EA 24 [30] 24 [30] [40] 24 [30]
Tool Shank - BBT40
Max. Tool Dia. (W.T / W.O) mm(in) Ø76/Ø150 (Ø3″/Ø5.9″) Ø90/Ø150 (Ø3.5″/Ø5.9″)[40 Tool :Ø76/Ø150 (Ø3″/Ø5.9″)] Ø90/Ø150 (Ø3.5″/Ø5.9″)
Max. Tool Length mm(in) 300 (11.8″)
Max. Tool Weight kg(lb) 8 (18)
Tool Selection Method - RANDOM
Tool Change TimeT-T sec 1.6 1.3
C-C sec 3.3 3.6 3.7
TANkCAPACITY
Coolant Tank ℓ(gal) 380 (100.4) 450 (119)
Lubricating Tank ℓ(gal) 2(0.5)
Hydraulic Tank ℓ(gal) -
POWERSUPPLY
Air Consumption (0.5MPa) ℓ/min(gal) 300
Electric Power Supply KVA 20 20 24
Thickness of Power Cable Sq Over 25
Voltage V/Hz 220/60 (200/50*)
MACHINE
Floor Space (L×W) mm(in) 2,700x1,920 (106.3″x75.5″) 3,100x2,172 (122″x85.5″) 3,500x2,590 (137.8″x102″)
Height mm(in) 2,524 (99.3″) 2,500 (98.4″) 2,860 (112.6″)
Weight kg(lb) 5,100 (11,243) 6,700 (14,770) 8,000 (17,636)
NC Controller - HW F i Series [S 828D] HW F i Series [iTROL]
*) Using 50Hz voltage instead of 60Hz may lower the output of motors. (excluding servo motors and inverter motors)Specifications are subject to change without notice for improvement.
CONTROLLER
30+
31
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
HYUNDAI WIA FANUC i SeriesControlled axis / Display / Accuracy Compensation
Controlled axis 3 axis (X, Y, Z)
Simultaneous controllable axis 3 axis(G00 & G01 : 3 axis, G02 & G03 : 2 axis)
Least input increment X, Y, Z축: 0.001 mm (0.0001″)Least command increment X, Y, Z축: 0.001 mm (0.0001″)Inch/Metric conversion G20 / G21Interlock Each axis / All axisMachine lock All axisEmergency stopStored stroke check 1 Over TrableStored stroke check 2Stored stroke check 3Follow-upServo off
Backlash compensation +/- 0~9999 pulse(rapid traverse & cutting feed)
Position switchStored pitch error compensationLCD/MDI 8.4″ color LCDOperationAutomatic operation (memory)MDI operationDNC operation Need DNC ProgramSearch function Sequence, ProgramProgram restartWrong operation preventionBuffer registerProgram check function Dry run, program checkSingle blockHandle interruptFeed functionsManual jog feed Rapid, Jog, handleManual handle feed-rate x1, x10, x100Feed command F code feedrate direct commandFeedrate override 0~200% (10% Unit)Jog feed 0~5,000 mm/min (197 ipm)Rapid traverse override F1, F25%, F50%, F100%Override cancel
Rapid traverse bell-shaped acceleration/deceleration
Auto corner override G62Program input & Interpolation functionsLabel SkipControl in/out
Nano Interpolation Positioning/Linear/Circular(G00/G01/G02/G03)
Exact stop mode/Exact stop G61 / G09Dwell G04, 0~9999.9999secHelical interpolationThreading/synchronous feed G33Manual reference point returnReference point return G28Reference point return check G272nd, 3rd, 4th Reference point return G30Program stop/end M00, M01 / M02, M30
Tape code EIA RS-244/ISO 840 (Automatic recognition)
Optional block skip 1 EAMax. programmable dimensions +/- 9999.9999 (+/- 8 digits)Program number O4 /N8Absolute/incremental command G90 / G91Decimal point inputPlane selection G17, G18, G19Work coordinate system setting G52~G59Work coordinate preset G50.3Additional work coordinate system G54.1 P1 ~P48 (48 pairs)Manual absolute "On" fixedProgrammable data input G10
Program input & Interpolation functions
Sub program call 10 folds nestedCustom macroAddition to custom macro common variables #100 ~ #199 , #500 ~ #999Cylinderical interpolation G02, G03Canned cycle G73, G74, G76, G80 ~ G89Optional chamfering/corner RSkip function G31High speed Skip functionAutomatic coordinate system settingCoordinate system rotation G68, G69Programmable mirror image G50.1, G51.1Single direction positioning G60External data input Tool offset, message, machine zero point shiftCylindrical interpolationAI advanced preview control G5.1 (20 Block look ahead)Polar coordinate command G15, G16Sub / Spindle functionsMiscellaneous function M3 digitsMiscellaneous function lockSpindle speed command S5 digits, binary outputSpindle speed override 50%~120% (10% unit)Spindle orientationRigid tappingTool functions / Tool compensationTool function Max. T8 digitsCutter compensation C G40~G42Tool length measurement Z Axis INPUT CTool length compensation G43, G44, G49Tool offset amount G45~G48 (+/- 6 digits)Tool offset pairs 400 pairsTool life managementData input / Output & Editing functionsReader/Puncher interface RS232CMemory card input/outputUSB input/outputEmbeded Ethernet 100MbpsPart program storage length 1280m (512 Kbyte)Registered programs 400 eaMemory lockBack ground editingExtended part program editing Copy, move, change of NC programSetting, display, diagnosisSelf-diagnosis functionHistory display Alarm & operator messageHelp functionRun hour/Parts count displayActual cutting feedrate displaySpindle/Servo setting screenMulti-language display Selection of 5 optional languageDynamic switching display languageLCD Screen Save Screen saver
OptionSub Axis Control 4, 5 Axiswo way pitch error compensationManual Guide 0i 8.4″ color LCDManual Guide i 10.4″ color LCD (Conversational Program)Dynamic graphic displayOptional block skip add 9 ea (Application can be limited)AI contour control(AICC) 40 Block look aheadAI contour control(AICC) Ⅱ 200 Block look aheadNano SmoothingTool Management FunctionProtection of data at 8 levelsData server 1GBFASTethernet 100 Mbps (Option board is required)Part program storage length Expand 5120m (2 Mbyte)
Figures in inch are converted from metric values.The FANUC controller specifications are subject to change based on the policy of company CNC supplying.
CONTROLLER
SIEMENS 828D (F400VM | F500VM)Control Function
Max. configuration of axis 5 axisMax. configuration of axis and spindle 6 axis (axis + spindle)Least Command/input 0.0001mm / 0.00001inchFeed FunctionFeedrate Override 0 - 120%Rapid Traverse Override F0, 5, 25/50, 100%Acceleration with jerk limitationProgrammable accelerationFollow-up modeMeasuring system 1 and 2, selectableSeparate path feed for corners and chamfersTravel to fixed stopSpindle FunctionsSpindle Override 50% - 120%Spindle OrientationSpindle Speed LimitationRigid TappingInterpolationsLinear interpolation axis Max 4 axisCircle via center point and end point Circle via interpolation point Helical interpolation
Universal interpolator NURBS (non-uniform rational B splines)
Advanced Surface High Speed, High Rigidity FunctionCompressor for 3-axis machiningTool FunctionTool Radius Comp.Zero Offset (G54, G55, G56, G57 ,G58, G59) 100 eaProgrammable Zero Offset3D Tool Radius CompensationTool managementDisplayCRT / MDI 10.4˝ Color LCDScreen saverManual OperationManual Handle/Jog FeedRepositionReference Approach Ref 1, 2 ApproachSpindle Control Start, Stop, Rev, Jog, Ort. Auto OperationSingle BlockFeed HoldOptional Block SkipMachine LockDry RunSimulation 2DDiagnosis FunctionAlarm displaySpindle Load Meter/RPM Meter (monitor)PLC status/LAD display
Programming Function
Part Program Storage Length 5MBProgram Name 23 digitsSubroutine Call Protection LevelAbsolute/incremental Command G90 - G91Scaling, ROTInch / Metric ConversionConversational Cycle ProgramBlock SearchVariable Program (Macro)Read / Write System VariableBackGround EditingMiscellaneous Functions M - CodeLable Skip Program Stop / End M00, M01, M02, M30Lookahead , Jerk Limitation Feed & Forward Control
150 Block
SIEMENS Program exe.Maximum number of tools/cuttings 256/512Number of levels for skip blocks 1Protection FunctionEmergency StopOver Travel Soft LimitContour MonitoringProgram ProtectionAutomation Support Fun.Actual Speed Display(Monitor)Tool Life Management (Time, Parts)Work Count Function (Internal)Language Function
Two Language switchable
(6EA)Chinese Traditional, Czech, Danish,Dutch, Finnish, Hungarian, Japanese,Korean, Polish, Russian, Swedish,Portuguese, Turkish
Data TransferRS 232C I/F / EthernetEthernetUSB Memory Stick & CF Card
OptionDRF offsetLoad and save of MDITeach-inNumber of levels for skip blocks 8 Simulation in 3D displayShop Turn Conversational ProgramTRACYLTRANSMIT
Figures in inch are converted from metric values.The SIEMENS controller specifications are subject to change based on the policy of company CNC supplying.
32+
33
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
CONTROLLER
Figures in inch are converted from metric values.Design and specifications are subject to change without notice.
HYUNDAI-iTROL (F650VM)Control & Composition
Number of axis/Spindles 3 axis (X, Y, Z)Number of axis/Spindles, max. 6 axis (Axis + Spindle)Color display TFT 10.4" Color (800 x 600)Keyboard QWERTY Full Keyboard Part program 1MB, 3MB, 5MB Addition of part program on CF cardTransfer FunctionFeedrate override 0% ~ 200% Transfer value input range ± 999999999Unlimited rotation of rotation axisAcc./Dec. with jerk limitationMeasuring systems 1 and 2, selectableTravel to fixed stopAuto servo drive tuningSpindle FunctionSpindle override 0% ~ 150% Spindle speed, max. programmable value ange 1000000 ~ 0.0001Automatic gear stage selectionSpindle orientationSpindle speed limitationRigid tappingInterpolationLinear interpolation axis, max. 4 axisCircle via center point and end pointCircle via interpolation point Helical interpolationNon-uniform rational B splinesCompressor for 3-axis machiningAdvanced surfaceProgram FunctionSubroutine levels, max. 11Interrupt routines, max. 4 Number of levels for skip blocks 2 Polar CoordinatesDimensions inch/metric, changeover manually or via programDynamic preprocessing memory FIFOLook ahead 50, 100, 150 Absolute/Incremental command G90 / G91 Scaling/RotationRead/Write system variablesBlock searchEdit backgroundProcessing program number, max. 750 Using of CF Card, USBBasic coordinate number, max. 1 Work coordinate number, max. 100Basic/Work coordinate programming changeScratching functionGlobal and Local user data (GUD/LUD)Global program user dataInteractive cycle programTool FunctionTool radius compensationsTool offset selection via T/D numbersTools / Cutting edges in tool list 80/160, 128/256, 256/512Monitoring FunctionWorking area limitSoftware and Hardware limitZero-speed/Clamping monitoring2D/3D protection zonesContour monitoring
Compensation
Backlash compensationLeadscrew error compensationMeasuring system error compensationFeedforward control (Speed control)Safety FunctionSafe torque off (STO)Safe brake control (SBC)Safe stop 1 (SS1)Diagnostic FunctionAlarm/Message , Alarm logPLC status/LAD online displayPLC remote connection (Ethernet)Automation Support FunctionActual velocity displayTool life management As time / As amount Work counter/Cycle time Embedded 2D simulationManual OperationManual handle/Jog transferManual measurement of workpiece / tool offsetAutomatic tool/Workpiece measurementAutomatic/Program reference approachAutomatic OperationProgram run as using CF card/USBProgram control/modificationBlock searchRepositionPreset (Set actual value)Data TransmissionEthernet networkUSB memory stick & CF cardConvenience Function
Processing setting Coordinate setting, Auto tool length measurement
Processing support Tool Monitoring, Spindle overload monitoringMaintenance Turret Guidance, I/O monitoring, Manual
Maintenance / Management Soft MCP, Spindle warming-upM/G code list
SMART machiningEnergy saving function (ECO)Machine Monitoring System (MMS Lite)LanguageStandard support language Chinese Simplified, English, Korean
OptionMaximum skip block number 10DRF offsetMDI program save/loadTeach-In mode3D simulation Except for working area/Collision checkReal time simulationShop Turn Conversational ProgramSpline interpolationProgram remote control in network
LanguageChinese Traditional, French, German,Italian, Portuguese, Spanish
GLOBAL NETWORK
34+
35
F-
VM S
erie
SVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
OVERSEAS OFFICES
GLOBAL NETWORK
Changwon Technical Center / R&D Center / Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 51533)TEL : +82 55 280 9114 FAX : +82 55 282 9680
Uiwang Technical Center / R&D Center37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 16082)TEL : +82 31 596 8209 Fax : +82 55 210 9804
HEADQUARTER
HYUNDAI WIAMachine Tools America 265, Spring Lake Drive, Itasca, IL, 60143
TEL : +1 630 625 5600 FAX : +1 630 625 4733
Jiangsu HYUNDAI WIACompany No.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, China
TEL : +86 512 5672 6808FAX : +86 512 5671 6960
Chengdu Branch OfficeNO.508 Room, B Block, AFC Plaza, NO.88 Jiaozi Road, High-tech Zone, Chengdu, China
TEL : +86 028 8665 2985FAX : +86 028 8665 2985
HYUNDAI WIAMachine Tools Europe Kaiserleipromenade 5, 63067 Offenbach, Germany
TEL : +49 69271 472 701FAX : +49 69271 472 719
Hyundai WIA Machine Tools ChinaShanghai Branch Office1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China
TEL : +86 021 6427 9885FAX : +86 021 6427 9890
Qingdao Branch OfficeRoom 1207, Cai Fu Building, 182-6 Haier Middle Road, Qingdao, China
TEL : +86 532 8667 9334FAX : +86 532 8667 9338
Raunheim Service CenterRaunheim R&D CenterFrankfurter. 63, 65479 Raunheim, Germany
TEL : +49 6142 9256 111 FAX : +49 6142 9256 100
Beijing Branch OfficeFloor 14, Zhonghangji Plaza B, No.15 Ronghua South Road, BDA Dist., Daxing Dist., Beijing, China 100176
TEL : +86 010 8453 9850FAX : +86 010 8453 9853
Wuhan Office306-2, A Tower,Jiayu Gpmggian, No12 Chuangye Road, Economic Development Zone, Wuhan, Hubei, China
TEL : +86 027 5952 3256FAX : +86 027 5952 3256
India Branch Office#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, IndiaTEL: +91-44-3290-1719
Guangzhou Branch OfficeRoom 311, Unit 1-3, POLY TAL TU WUN, Hanxi Avenue, Panyu District, Guangzhou, China
TEL : +86 020 8550 6595 FAX : +86 020 8550 6597
Chongqing OfficeRoom 951, #3, Jinrongcheng T3, Jiangbei, Chongqing, China
TEL : +86 23 6701 2970
Head Office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do Tel +82 55 280 9500
Overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do Tel +82 31 593 8173
HYUNDAI WIA Machine Tools America265 Spring Lake Drive,Itasca, IL, 60143 Tel +1 (630) 625 5600 Fax +1 (630) 625 4733
HYUNDAI WIA Machine Tools EuropeKaiserleipromenade 5, D-63067 Offenbach, Germany Tel +49 69271 472 701 Fax +49 69271 472 719
India Branch Office#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, India Tel +91 44 3290 1719
http://machine.hyundai-wia.com
2017-05 001.001 ENG