fa20club oil cooler install guide

Upload: fa20club

Post on 04-Jun-2018

228 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/13/2019 FA20CLUB oil cooler install guide

    1/10

    FA20CLUB HD OIL COOLER KIT INSTALLATION GUIDE

    1. We need to remove the front bumper, so turn your steering wheel all the way to oneside and remove the three plastic pop rivets at the lower portion of the fender splash

    guard.

  • 8/13/2019 FA20CLUB oil cooler install guide

    2/10

    2. There is another plastic pop rivet located just beside the sidemarker that needs to beremoved.

  • 8/13/2019 FA20CLUB oil cooler install guide

    3/10

    3. The sidemarker itself needs to come out. ull the inner fender liner away and try yourhardest to poke a screwdriver into one of the holes on the back of the sidemarker and pry.

    !ven after " got it out " am still confused as to why #ubaru did it this way. !ven theowners manual is very vague and the instructions make no sense. $ood luck.

  • 8/13/2019 FA20CLUB oil cooler install guide

    4/10

    %. &', now that you (hopefully) have the sidemarker out, there is a plastic pop rivetlocated directly above where it was mounted. This fi*es the corner of the bumper to the

    bottom of the fender, so it needs to come out.

  • 8/13/2019 FA20CLUB oil cooler install guide

    5/10

    +. There are three pop rivets centered under the front bumper. emove them.

  • 8/13/2019 FA20CLUB oil cooler install guide

    6/10

    -. There are two 1mm bolts under there as well, one on each side. &ut they go.

  • 8/13/2019 FA20CLUB oil cooler install guide

    7/10

    /. Two more plastic pop rivets attach the bumper to the splash guards at each corner ofthe car. 0ll four of those need to be removed.

  • 8/13/2019 FA20CLUB oil cooler install guide

    8/10

    . ow up top there are five 1mm bolts and a couple more pop rivets. &nce you removethose the entire flat metal bar that holds the top of the bumper on will lift off.

  • 8/13/2019 FA20CLUB oil cooler install guide

    9/10

    . To remove the bumper, firmly pull out on each corner and it will pop off.

    Radiator removal

    htt!""###$%o&t&'e$(om"#at(h)v*+'U,-.,,td/

    Oil Cooler I./tallatio.

    $ Remove the oil 1ilter 1rom it/ ho&/i.$ NOTE! 3a4e /&re the e.i.e ha/ had amle time to

    (ool do#. 'e1ore doi. /o$

    2$ I./tall the oil 1ilter /a(er r&''er /eal 1a(i. do#.#ard/$Ne5t i./tall the 3o(al Oil Filter adater o. to o1 the /a(er #ith it/ /eal 1a(i. do#.#ard/ a/

    #ell$

    -$ Ne5t i./ert the threaded oil 1ilter adater thro&h 'oth the oil 1ilter /a(er a.d the oil

    1ilter adater$ S.& do#. 1or .o# to /till allo# moveme.t to ali. o&tlet/$

    6$ Ne5t ro&te 'oth oil (ooler li.e/ thro&h the hole &.der the radiator /&ort$

    http://www.youtube.com/watch?v=7bUV3nVVtdshttp://www.youtube.com/watch?v=7bUV3nVVtds
  • 8/13/2019 FA20CLUB oil cooler install guide

    10/10

    7$ 8o& #ill .o# 'e a'le to mo&.t the L2L(ore a//em'l% to the to or the 'ottom o1 %o&r

    (ra/h 'eam dee.di. o. %o&r re9&e/ted la(eme.t$ 3o/t 4it/ mo&.t o. the to /ide$

    :$ Ce.ter the (ore a.d mar4 2 /ot/ 1or the /&lied 'ra(4et/$ 8o& #ill .eed to drill a /mall ilot

    hole i.to the (ra/h 'ar 1or ilot hole/ o1 the /&lied /el1 tai. /(re#/$ O.(e thi/ i/ do.e i./tall

    &/i. the /ell ta /(re#/$

    +$ At thi/ oi.t %o& #ill 'e a'le to i./tall the heater li.e/ to the (ooli. ortio. o1 the L2L (ore$

    The 1itti./ are 67 deree a.d a// riht &.der the la/ti( ho&/i. 1or 'oth driver a.d a//e.er

    headliht/$ It miht 'e .e(e//ar% to /have a 'it o1 the 'la(4 la/ti( 1or otimal (leara.(e o1 the

    heater ho/e$

    ;$