fabrics faults and remedy
DESCRIPTION
TRANSCRIPT
Southeast university
DEPERTMENT OF TEXTILE ENGINEERING
April 10, 2023 AKL and GMS 1
Company profile Name of the Company: Alim Knitwear ltd Year of Establishment: 2005-2006 Certified Achievement: ISO 9001:2000, (Certified), Oeko-Tex Standard 100 (Certified) Manufacturing products: Export oriented knit fabrics dyeing and readymade garments Owner and directors of the factory: Alim mondal. Factory Address: Nayapara, Kashimpur, Gazipur, Bangladesh Total Employees: 4500 Number of units: 3 (Three) units Part-A: Garments unit – 3 floors Part-C: Dyeing unit Part-D: Printing unit Total area: 0.5 acres Corresponding Bank: 1) United Commercial Bank Limited . Dhaka, Bangladesh
2) Dutch Bangla Bank Ltd. Dhaka, Bangladesh Factory Supervisor: Md. Mamun ( PM in garments section) Supervising teacher: Md. Abul Kalam Azad.
April 10, 2023 AKL and GMS 2
Another Name of the Company: GMS composite Knitting industries ltd. Year of Establishment: 2003-2004 Certified Achievement: ISO 9001:2000, (Certified), Oeko-Tex Standard 100
(Certified) Manufacturing products: Export oriented knit fabrics dyeing and readymade
garments Owner and directors of the factory: GMS composite Knitting industries ltd. Factory Address: Ssaradagong, Kashimpur, Gazipur, Bangladesh Total Employees: 4500 Number of units: 3 (Three) units Part-A: Garments unit – 3 floors Part-C: Dyeing unit Part-D: Printing unit Part-E: knitting unit. Factory Supervisor: Md. Saiful Islam
April 10, 2023 AKL and GMS 3
Object of training To know about garments faults & remedy we
justify each & every garments. To knowing that we give max customers
satisfaction. To know about different fabric inspection. To know about different quality parameters of
fabric, different trims & accessories. To know about buyers AQL. To know about major or minor fabric faults.
April 10, 2023 AKL and GMS 4
Methodology of textile faults.
For Yarn manufacturing technology:
We study different types of yarn faults, causes and its remedy.
April 10, 2023 AKL and GMS 5
Faults name Causes Remedy
1. Slub Lack of adequate fibre control in the drafting Zone.
Proper fibre control of drafting zone
2. Oily slub Improper lubrication proper lubrication
3. Kitty yarn Improper ginning i.e. Seeds broken during ginning
proper ginning i.e. Seeds broken during ginning
1. Slub
2. Kitty yarn
April 10, 2023 AKL and GMS 6
April 10, 2023 AKL and GMS 7
Faults name Causes Remedy
4. Foreign matters Improper handling of travelersImproper preparation of mixing
proper handling of travelersproper preparation of mixing
5. Soft yarn Improper bobbin feed on the spindlesLess twist in the yarn
proper bobbin feed on the spindlesProper twist in the yarn
6. Crackers Mixing of cotton of widely different staple lengthsCloser roller settings
Proper Mixing of cotton of widely differing staple lengthsProper roller settings
Spinning faults and remedy percentage diagram
April 10, 2023 AKL and GMS 8
Sl = slub yarnOi = oily slubKi = Kitty yarnFo = Foreign matterCo = cork screw yarnOv = over twisted yarnSo = soft yarnCra = cracker
Rem
edy %
Faults name
Knitting faults, causes and its remedy:
Faults name Causes Remedy
1. Barre Caused by mixing yarn on feed into machine.
Proper yearn selection and proper roller adjustment.
2. Broken Colour Pattern
Usually caused by color yarn out of place on frame.
Proper adjustment of color and yarn.
April 10, 2023 AKL and GMS 9
Faults name Causes Remedy
3. Crease mark Its create when fabric passing through squeeze rollers in the dyeing process. Its mainly Occurs in tubular knits fabric.
Proper adjustment of squeeze rollers.
4. Hole caused by broken needle Change the needle.
5. Needle Line Caused by broken needle forming distorted stitches
Replace the needle
April 10, 2023 AKL and GMS 10
April 10, 2023 AKL and GMS 11
Faults name Causes Remedy
6. Runner Usually caused by broken needle.
Change the needle.
7. Slub (Knit fabric) Usually caused by a thick or heavy place in yarn
Replace the yarn cone to a more uniform yarn cone.
Different Causes of Fabric Barre
April 10, 2023 AKL and GMS 12
Knitting faults and remedy percentage diagram:
April 10, 2023 AKL and GMS 13R
emedy %
Ba = barre markBro = broken colorMis = missing yarnMix = mixing yarn
Dyeing, printing and finishing faults and remedy
Classification of Defects Minor Defect A defect is defined as minor Defect that is not likely to reduce the Usability
of the product, but nevertheless may negatively influence the sales. The minor defects can be untrimmed thread-ends, slight dirt in a non-
noticeable zone which can be removed, etc Major Defect A defect that, if conspicuous on the finished product, would cause the item
to be a second. (A "second" is a garment with a conspicuous defect that affects the salability or serviceability of the item.
April 10, 2023 AKL and GMS 14
Faults name Causes Remedy
1. Barre Its horizontal shaded band across the width of the fabric. It causes by the yarn mixing
proper yarn selection.
2. Bleeding improper dye selection or poor dye fastness.
proper dye selection.
3. Crocking It is the rubbing off of the color.It may rub onto another fabric.
proper dye selection.
April 10, 2023 AKL and GMS 15
barre Bleeding Crocking
Faults name Causes Remedy
4. Shading It is generally due to uneven tension on the fabric.
To maintain the proper tension
5. Stained caused by a foreign substance, dirt, grease, and oil or sizing residue on the fabric being dyed.
To using different spot remover chemical
6. Color variation in yarn
Caused due to lack of agitation in the dye bath
proper agitation in the dye bath.
April 10, 2023 AKL and GMS 16
Shading stained Color variation yarn
April 10, 2023 AKL and GMS 17
Faults name Causes Remedy
7. Creasing Causes unleveled penetration of dyes
To use proper dyes and chemical or leveling agent.
8. Flushing/Wicking Caused due to Low viscosity of print paste
To use high viscosity of printing past
9. Bleeding Caused due to Low viscosity of print paste
To use high viscosity of printing past.
Creasing Flushing Bleeding
Faults name Causes Remedy
10. Crack or miss alignment in transfer printed fabric.
Incomplete transfer of design from paper to fabric
Proper transfer of design.
11. Unwanted marks on fabric. Causes by the contact with oil or grease covered exposed machine parts, careless handling
To using spot cleaner.
12. Decolorized patch on fabric Caused due to chemical spillage on fabric. Localized excess bleaching. Localized excess enzyme wash.
To using spot cleaner.
April 10, 2023 AKL and GMS 18
Crack Unwanted mark Decolorized patch on fabric
Dyeing and printing faults and remedy percentage diagram
April 10, 2023 AKL and GMS 19
Rem
edy %
Bar = barreBl = bleedingSh = shaddingRu = running shadeCrea = creasing Un = unwanded markFlu = flushing Crak = crack or miss aligment
Garments faults and remedyFaults Name Causes Remedy 1. Misprints or off registration. not properly cleaning of Printing
screens .Properly Cleaning of printing screen.
2. Grease/ Oil / dirty stains. Oil stains generally come from sewing machines; machines such as over lock and flat lock machines are more prone to have oil stains.
To use spot cleaner chemical
3. Needle damage. using the wrong needle. Repairing or older the garments
4. Open or broken seams improper handling of the cut piece or machine
Repairing or alter the garments.
April 10, 2023 AKL and GMS 20
Misprint Grease/ oil/ dirty stain. Needle damage Open or broken seam
Faults name Causes Remedy 5. Broken stitch improper handling of cut pieces or
improper machine usage.Repairing or alter the garments
6. Skipped or dropped stitches improper handling of cut pieces or improper machine usage.
Repairing or alter the garments
7. Neck shape. caused by defective cut pieces. Repairing or alter the garments or use proper cut piece of garments.
8. Sewing thread not matching. To use improper sewing thread. To use proper sewing thread.
April 10, 2023 AKL and GMS 21
Broken stitch Skipped stitch Neck shape Sewing thread not matching
Faults name Causes Remedy 1. Seams not aligned at crossing of seams.
improper handling of the cut piece. Repairing or older the garments.
2. Stripes not matching. from improper handling of cut pieces.
Repairing or older the garments.
3. Misplaced label improper placement of labels when sewing
Repairing or alter the garments or proper placement of the label.
April 10, 2023 AKL and GMS 22
Seam not aligned at crossing of seams Stripes not matching Misplaced label
Garments faults and remedy diagram
April 10, 2023 AKL and GMS 23
Dir = dirty stain Bro = broken stitchSkip = skip stitchSw = sewing thread not matchMiss = misplace labelNec = neck shapePo = pocket dispositionUn = uncovered seamBrok = broken seam
Conclusion
In Bangladesh the maximum dyeing industry are knit dyeing Industry. So these kinds of industries are often suffering by these Faults which tend to not fulfill the target of production. As a result the production capacity of these industries falls significantly. These are the common faults which I have tried to find out the causes & their Remedies against them.
April 10, 2023 AKL and GMS 24