faculty of electrical and electronic ... - cad.uthm.edu.my

1

FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING

UNIVERSITY TUN HUSSEIN ONN MALAYSIA

PROGRAMME SPECIFICATIONS

Programme

Bachelor of Electrical Engineering with Honours

Award

Bachelor of Electrical Engineering with Honours

Duration Minimum Maximum

8 semester 12 semester

Terms and Conditions for enrolment:

Entry requirements to gain entry to any courses in this faculty are as follows:

1. STPM Holder

General University Requirements:

i. Pass in SPM with good grades.

ii. Pass with credit in Bahasa Melayu/Bahasa Malaysia or in Bahasa Melayu/Bahasa Malaysia July

Paper at SPM level or its equivalent.

iii. Pass STPM with at least a CPA of 2.00 and at least Grade C (GPA 2.00) in General Paper and Grade

C (GPA 2.00) in other two (2) subjects.

iv. A pass in English and obtained at least Band 1 in the “Malaysian University English Test” (MUET)

or its equivalent.

Special Requirements for University Program:

i. Obtained at least Grade C (GPA 2.00) at STPM level in these subjects:

a. T Mathematics / Advanced T Mathematics

b. Physics

c. Chemistry

ii. A pass in English at SPM level

iii. Clear Sight / Colour Blindness

iv. No physical handicap which can disrupt practical training.

2. KPM Matriculation Certificate Holder

General University Requirements:




iii. Pass KPM Matriculation / UM Science Foundation / UiTM Foundation with at least a CGPA of 2.00


or its equivalent.


i. Obtained at least Grade C (GPA 2.00) at Matriculation / Foundation level in these subjects:

(a) Mathematics / Additional Mathematics

(b) Physics / Engineering Physics

(c) Chemistry / Engineering Chemistry

ii. At least a pass in English at SPM level.

iii. Clear sight / Colour blindness.

iv. No physical handicap which can disrupt practical training.

2




3. Diploma Holder or equivalents

University General Requirements:




iii. A diploma holder or other equivalents which is accredited by Malaysian government and University

Senate; or pass Matriculation examination for the year of 2006 or before with at least a CGPA of

2.00


or its equivalent.


i. A Diploma holder in related Engineering fields from other Higher Learning Institutions (IPTA) or its

equivalent which is accredited by Malaysian government and approved by the University Senate

with at least a CGPA of 2.70

ii. Candidates who do not fulfill the CGPA requirement as stated in (i) but obtained at least a CGPA of

2.50 and have 2 years working experiences will be considered.

Candidates who fulfill the entry requirements but do not obtained at least Band 2 can apply and if

succeed, must obtain at least Band 2 in “Malaysian University English Test” (MUET)

iii. A pass in English at SPM level.

iv. Clear sight / Colour blindness

v. No physical handicap which can disrupt practical training.

PROGRAMME EDUCATIONAL OBJECTIVES (PEO)

To produce graduates who, during the first several years of electrical and electronic

engineering practice, are:-

1. Competent with, strong understanding of engineering fundamentals.

2. Professional, with the right attitudes and ethics necessary in fulfilling his/her

responsibilities towards the Creator, client and society.

3. Able to communicate effectively.

4. Able to adapt (including life long learning) to the national and international work

Environment.

5. Effective leaders or team members in their respective groups and organizations)

6. Able to innovate and also resolve engineering problems)

3




Programme Learning Outcome (PLO)

Upon graduation, a graduate should acquire the followings :

1. Acquired and able to apply knowledge of basic science, and electrical engineering fundamental;

2. In-depth technical competence in a electrical discipline

3. The ability to use techniques, skills, modern engineering tools necessary for electrical engineering

practice and easily adaptable to industrial needs;

4. The ability to identify problems, create solutions, innovate and improve current designs and practices;

5. The ability to communicate effectively and use ICT effectively;

6. An understanding of professional and ethical responsibilities and commitment to the community;

7. A recognition of the need for, and an ability to engage in, life-long learning (adaptability to new situations

and demands by applying and or updating knowledge and skills);

8. The ability to function effectively in groups in ways that contribute to effective working relationships and

the achievement of goal both as a leader as well as and effective team player;

9. The ability to have an international perspective on social, cultural, global and international responsibilities,

including the understanding of entrepreneurship and the process of innovation, of a professional engineer

and the need for sustainable development;

10. The ability to appreciate aesthetic values through development and applications of personal judgment;

4




Programme Structure

Code Course Credit Lecture Tutorial Practical SLT

UMA 1162 Islamic and Asian Civilizations 2 2 0 0 2

UMB 1052 Effective Communication 2 2 1 0 3

BSM 1913 Engineering Mathematic I 3 3 1 0 4

UQ* 1xx1 Co-Curriculum I 1 0 0 3 3

BEE 1113 Electrical Circuit Theory 3 2 1 3 6

BDA 1602 Material Sciences 2 2 1 0 3

BEE 1122 Computer Networks and Software 2 1 0 3 4

UMB 1011 English for Academic Purposes ** 1 1 1 0 2

UMS 1122 Ethnic Relations 2 2 0 0 2

UMB 1042 Technical Writing 2 2 1 0 3

BSM 1933 Engineering Mathematic II 3 3 1 0 4

BDA 1612 Thermodynamics 2 2 1 0 3

BEE 1212 Computer Programming 2 1 1 3 5

BEE 1223 Electrical Technology 3 3 1 0 4

BEE 1231 Electrical Engineering Practices 1 0 0 3 3

UMA 1182/ Islamic Studies / 2 2 0 0 2

UMA 1142 Moral Studies

UMC 1022 Creativity and Innovation 2 2 1 0 3

BSM 2913 Engineering Mathematic III 3 3 1 0 4

UM* 1312 Foreign Language 2 2 1 0 3

BEE 2113 Electronic Principles 3 3 1 0 4

BEE 2123 Electrical Measurements and

Instrumentation

3 3 1 0 4

BEE 2191 Electrical Engineering Lab I

(BEE2113, BEE2123)

1 0 0 3 3

UMS 1113 Nationhood and Current Development

of Malaysia

3 3 0 0 3

BSM 3913 Engineering Mathematic IV 3 3 1 0 4

BEE 2263 Electromagnetic Waves and Fields 3 3 1 0 4

BEE 2273 Electronic Devices and Applications 3 3 1 0 4

BEE 2233 Digital Electronics 3 3 1 0 4

BEE 2291 Electrical Engineering Lab II

(BEE2273, BEE2233)

1 0 0 3 3

UQ* 1**1 Co-Curriculum II 1 0 0 3 3

BSM 2922 Engineering Statistic 2 2 1 0 3

BEE 3113 Electrical Networks Analysis and

Synthesis

3 2 1 3 6

BEE 3123 Communication Engineering 3 3 1 0 4

BEE 3133 Digital System Design 3 3 1 0 4

BEE 3143 Control System 3 3 1 0 4

BEE 3191 Electrical Engineering Lab III 1 0 0 3 3

5




(BE3123, BEE3133, BEE3143)

BPK 3013 Engineering Economic and

Entreprenuership

3 3 1 0 4

BEE 3213 Digital Signal Processing 3 3 1 0 4

BEE 3223 Applied Electromagnetic 3 3 1 0 4

BEE 3233 Microcontroller and Microprocessor 3 3 1 0 4

BEE 3243 Electrical Power System 3 3 1 0 4

BEE 3291 Electrical Engineering Lab IV

(BEE3223, BEE3233, BEE3243)

1 0 0 3 3

BPK 4023 Engineering Management 3 3 1 0 4

BEE 4113 Power Electronics 3 3 1 0 4

BEE 4123 Electrical Machines and Drives 3 3 1 0 4

BEE 4191 Electrical Engineering Lab V

(BEE4113, BEE4123)

1 0 0 3 3

BE* 4**3 Elective 1 3 2 1 3 6

BEE 4192 Final Year Project I 2 0 0 6 6

BPK 4032 Engineers and Society 2 2 1 0 3

BEE 4213 Electrical Energy Utilisation 3 3 1 0 4

BE* 4**3 Elective 2 3 3 1 0 4

BE* 4**3 Elective 3 3 3 1 0 4

BEE 4294 Final Year Project II 4 0 0 12 12

BEE 4394 Industrial Training 4 0 0 0 0

JUMLAH 128 105 36 57 198

Elective Courses


Communication Engineering

BEP 4113 Digital Communication 3 2 1 3 6

BEP 4213 Switching and Traffic Engineering 3 3 1 0 4

BEP 4223 Data Communication 3 3 1 0 4

BEP 4273 Mobile Radio Communication 3 3 1 0 4

BEP 4243 Satellite Communication System 3 3 1 0 4

BEP 4253 Optical Communication System 3 3 1 0 4

BEP 4263 Rf and Microwave Engineering 3 3 1 0 4

9 8 3 3 14

Automation System and Robotic

BER 4113 Digital Control 3 2 1 3 6

BER 4213 Flexible Automation System 3 3 1 0 4

BER 4223 Microcontroller Application 3 3 1 0 4

BER 4233 Fuzzy Control System 3 3 1 0 4

BER 4243 Industrial Robotics 3 3 1 0 4

BER 4253 Industrial Control System 3 3 1 0 4

9 8 3 3 14

6





Electrical Power

BEK 4113 Electrical Power Measurements and

Testing

3 2 1 3 6

BEK 4213 Transmission and Distribution of

Electrical Power System

3 3 1 0 4

BEK 4223 Power System Protection 3 3 1 0 4

BEK 4233 Electrical System Design 3 3 1 0 4

BEK 4243 Electrical Energy Generation 3 3 1 0 4

BEK 4263 Power Station Engineering

BEK 4253 High Voltage Engineering

9 8 3 3 14

Medical Electronic

BEU 4113 Human Physiology 3 2 1 3 6

BEU 4213 Medical Instrumentation 1 3 3 1 0 4

BEU 4223 Medical Imaging 3 3 1 0 4

BEU 4233 Telemedicine 3 3 1 0 4

BEU 4243 Medical Instrumentation 2 3 3 1 0 4

9 8 3 3 14

Computer Engineering

BEC 4113 Computer Architecture 3 2 1 3 6

BEC 4213 Microelectronic 3 3 1 0 4

BEC 4223 Computer Network 3 3 1 0 4

BEC 4233 Computer Systems Engineering 3 3 1 0 4

BEC 4243 Operating System 3 3 1 0 4

BEC 4253 Embedded System Design 3 3 1 0 4

9 8 3 3 14

Mechatronic

BEM 4713 Digital Control 3 2 1 3 6

BEM 4213 Mechanism and Machine 3 3 1 0 4

BEM 4223 Intelligent Robot 3 3 1 0 4

BEM 4233 Neural Networks and Fuzzy Logic 3 3 1 0 4

BEM 4843 Control Electronics 3 3 1 0 4

BEM 4853 Industrial Automation System 3 3 1 0 4

9 8 3 3 14

Nota: * Electives subjects must be taken from the same group

** Those who have obtained MUET of at least Band 3 and managed to acquire passing marks of more

than 50% in English Placement Test will be exempted from UMB 1011

7




Matrix of Programme Learning Outcome – Course

Bil Code Course Programme Learning Outcome

LO1 LO2 LO3 LO4 LO5 LO6 LO7 LO8 LO9 LO10

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

1 UMA 1162 Islamic and Asian

Civilizations x x x x x x

2 UMB 1052 Effective

Communication x x x x x

3 BSM 1913 Engineering

Mathematic 1 x x x

4 UQ* 1xx1 Co-Curriculum 1 x x x

5 BEE 1113 Electrical Circuit

Theory x x x x x x x x

x x

6 BDA 1602 Material Sciences x x x x x x x x

7 BEE 1122 Computer Networks

and Software x x x x x x x x x

8 UMB 1011 English for

Academic Purposes

**

x x x x x x

9 UMS 1122 Ethnic Relations x x x x x x x

10 UMB 1042 Technical Writing x x x x


Mathematic II x x x

12 BDA 1612 Thermodynamics x x x x x x x x x x

13 BEE 1212 Computer

Programming x x x x x x x x x x

14 BEE 1223 Electrical

Technology x x x x x x x


Engineering

Practices

x x x x x x x x x

16 UMA1182/

UMA1142

Islamic Studies/

Moral Studies x x x x x x x

17 UMC 1022 Creativity and

Innovation x x x x


Mathematic III x x x

19 UM* 1312 Foreign Language x x x x x x x

20 BEE 2113 Electronic

Principles x x x x x x x


Measurements and

Instrumentations

x x x x x x x x x x x

8





Engineering Lab I x x x x x x x

23 UMS 1113 Nationhood and

Current

Development of

Malaysia

x x x x x x x


Mathematic IV x x x

25 BEE 2263 Electromagnetic

Waves and Fields x x x x

26 BEE 2273 Electronic Devices

and Applications x x x x x x x

27 BEE 2233 Digital Electronics x x x x x x x x x


Engineering Lab II x x x x x x x x x

29 UQ* 1**1 Co-Curriculum II x x x


Statistic x x x x x x x

31 BEE 3113 Electrical Networks

Analysis and

Synthesis

x x x x x x x x x x

32 BEE 3123 Communication

Engineering x x x x x

33 BEE 3133 Digital System

Design x x x x x x x x x x

34 BEE 3143 Control System x x x x x


Engineering Lab III x x x x x x x

36 BPK 3013 Engineering

Economic and

Entrepreneurship

x x x x x x x

37 BEE 3213 Digital Signal

Processing x x x x x x x x x x

38 BEE 3223 Applied

Electromagnetic x x x x x x

39 BEE 3233 Microcontroller and

Microprocessor x x x x x x x x x x

40 BEE 3243 Electrical Power

System x x x x x x x x x x


Engineering Lab IV x x x x x x

42 BPK 4023 Engineering

Managemnet x x x x x x x x x x

9




43 BEE 4113 Power Electronics x x x x x x x x

44 BEE 4123 Electrical Machines

and Drives x x x x x x x x x x


Engineering Lab V x x x x x x x x x x

46 BE* 4**3 Elective 1

47 BEE 4192 Final Year Project I x x x x x x x x x x

48 BPK 4032 Engineers and

Society x x x x x x x

49 BEE 4213 Electrical Energy

Utilisation x x x x x x x x x



52 BEE 4294 Final Year Project 2 x x x x x x x x x x

53 BEE 4394 Industrial Training x x x x x x x x x x

Matrix of Programme Learning Outcome – Elective Course

Bil Code Course Programme Learning Outcome

LO1 LO2 LO3 LO4 LO5 LO6 LO7 LO8 LO9 LO10

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

Communication Engineering

54 BEP 4113 Digital

Communication x x x x x x x x x

55 BEP 4213 Switching and

Traffic Engineering x x x x x x x x x x

56 BEP 4223 Data


57 BEP 4273 Mobile Radio


x

58 BEP 4243 Satellite

Communication

System

x x x x x x x x

x

59 BEP 4253 Optical

Communication

System

x x x x x x x x

60 BEP 4263 Rf and Microwave

Engineering x x x x x x x x x

Automation System and Robotic

61 BER 4113 Digital Control x x x x

62 BER 4213 Flexible Automation

System x x x x x x x x x

10




63 BER 4223 Microcontroller

Application x x x x x x x x

64 BER 4233 Fuzzy Control

System x x x x x x x

65 BER 4243 Industrial Robotics x x x x x x x x x x

66 BER 4253 Industrial Control

System x x x x x x x x x x

Electrical Power

67 BEK 4113 Electrical Power

Measurements and

Testing

x x x x x x x x x x

68 BEK 4213 Transmission and

Distribution of

Electrical Power

System

x x x x x x x

69 BEK 4223 Power System

Protection x x x x x x x x

70 BEK 4233 Electrical System

Design x x x x x x x

71 BEK 4243 Electrical Energy

Generation x x x x x x x x x x

72 BEK 4253 High Voltage

Engineering x x x x x x x

73 BEK 4263 Power Station

Engineering x x x x x x

Medical Electronic

74 BEU 4113 Human Physiology x x x x x x x x x x

75 BEU 4213 Medical

Instrumentation 1 x x x x x x x x x x

76 BEU 4223 Medical Imaging x x x x x x x x x x

77 BEU 4233 Telemedicine x x x x x x x x x x

78 BEU 4243 Medical

Instrumentation 2 x x x x x x x x x x

Computer Engineering

79 BEC 4113 Computer

Architecture x x x x x x x x x x

80 BEC 4213 Microelectronic x x x x x x x x x x

11




81 BEC 4223 Computer Network x x x x x x x x x x

82 BEC 4233 Computer Systems

Engineering x x x x x x x x x x

83 BEC 4243 Operating System x x x x x x x x x x

84 BEC 4253 Embedded System

Design x x x x x x x x x x

Mechatronic

85 BEM 4713 Digital Control x x x x

86 BEM 4213 Mechanism and

Machine x x x x x x x x x x

87 BEM 4223 Intelligent Robot x x x x x x x x x x

88 BEM 4233 Neural Networks

and Fuzzy Logic x x x x x x x

89 BEM 4843 Control Electronics x x x x x x x x x

90 BEM 4853 Sistem Automasi

Industri x x x x x x x

12




Delivery Method

This program is disseminated by various delivery methods to fulfill the subject learning outcomes and in general,

to prepare a centralized learning opportunities. Those methods are:

1. Lectures and Tutorials

2. Practical and Application session-oriented: Laboratory work, workshop, site visit / site work, demonstration

or simulation.

3. Seminar and industrial visit.

4. Case-based Learning (Project-Oriented Problem-based Learning)

5. Project

6. E-Learning

Evaluation Method

Formative and Summative evaluations which comprise of:

1. Written Examinations

2. Test / Quiz

3. Assignment

4. Presentation

5. Laboratory Report

6. Skill Inspection

7. Log book

8. Industrial Evaluation

Terms and Conditions for the award of the program:

1. Student should apply for the award and the application is granted by the Faculty.

2. Pass all compulsory subjects as required by the program.

3. Obtained a total KREDIT DAPAT as required and obtained KEDUDUKAN BAIK.

4. A pass in Bahasa Melayu at SPM level.

5. Obtained at least Band 2 in “Malaysian University English Test” (MUET)

6. Application must be made by using Bachelor’s Degree Award Application Form or Diploma within the

stipulated time imposed by the University.

7. Obtained approval and award certification from the Senate.

13




Career Opportunity

Graduates will have a vast career opportunity in electrical and electronic engineering field within the country

itself or abroad as electrical or electronic engineers. However, graduates are qualified to become an engineer in

various industries such as telecommunications, factory sectors and manufacturing, health industry, computer

industry, information technology and other engineering fields. Graduates who have passion in research can work

as a researcher in any institutions that offer applied research area. Other than that, graduates are qualified to

further their study in any postgraduates courses at any universities within the country itself or abroad subject to

excellent academic results. In addition, graduates can become an academician at any local universities and other

higher learning institutions, polytechnics, community colleges or schools.

Related Information

(Lecturers/Fasilitators/Project/Target Group/Fees/etc)

1. Academicians:

i. Lecturers teaching university compulsory subjects and basic subjects comprise of academic staffs at

Centre for Science Studies (PPS), Centre for Humanities and Communication Studies (PPKK) and

Centre of Co-Curricular, Sports and Culture (PKSK). Lecturers who teach core and elective subject of

the programs comprise of academic staffs in Faculty of Electrical and Electronic Engineering.

ii. Instructors teaching Engineering Skills comprise of academic staffs who possess industrial experiences.

2. Learning Concept

The learning concept of this program is practice-oriented and Outcome-Based Education (OBE) in which the

students will be exposed to theoretical and practical training exercises in the university for 8 semesters and

in the industry for 12 weeks.

3. Fees

The fee rates for this program are RM510.00 (Fee paid once during the whole program duration) and

RM1,908.00 (Fee for every semester)

4. Faculty PROFORMA can be obtained from the University websites, www.uthm.edu.my

Prepared by:

…………………………………………………..

Dr. Jiwa bin Abdullah

Deputy Dean (Academic & Internationa)

Faculty of Electrical and Electronic Engineering

Universiti Tun Hussein Onn Malaysia

Tel: 07-4537501

Approved by:

…………………………………………………..

Prof. Ir Dr Zainal Abidin bin Ahmad

Dean

Faculty of Electrical and Electronic Engineering

Universiti Tun Hussein Onn Malaysia

Tel: 07-4537500

Date : 17 Jun 2009 Date : 17 Jun 2009

Note : Information is true in printing time and may be eliminated change at anytime

faculty of electrical and electronic ... - cad.uthm.edu.my

Documents