fairie wings — hidden tag card set sheets...to the top, bottom and right hand side creating a...

2
G45 Card Club Vol. 8 – 2020 : Featuring - Fairie Wings Fairie Wings — Hidden Tag Card Set www.g45papers.com | [email protected] pg 1 of 2 Card #1 1. Cut a piece from the B-side of Daffodil Dance to measure 3¾” x 5” and adhere this to the inside a card base. Adhere the B-side of the “Dreams” 3” x 4” journal card to the center of the Daffodil Dance piece. 2. Trim out the butterfly cut apart from the Butterfly Whimsey page (make sure you trim out the border strips first as these will be used later.) Adhere this element to the left side of the journaling card (see photo for placement). 3. Cut a piece of Daffodil Dance to measure 2” x 5¼” and adhere this to the left hand side of the front of the card leaving an even border along top, bottom and left side. 4. Trim off the yellow floral border from the Fairy 4” x 6” journal card. (This piece should measure approximately 3¼” x 5¼” once trimmed.) Apply adhesive to the top, bottom and right hand side creating a pocket. Adhere it to the front of the card lining up the right side leaving an even border as shown. 5. Trim out the “Leave a little Sparkle” cut apart element from the Butterfly Whimsey page adhere this to the front of the card using foam adhesive (see photo for placement). Cut a piece from the B-side of Daffodil Dance to measure ¾” x 1¼” and flag the end and adhere to the upper right hand corner using foam adhesive. Using a ¾” circle punch or your scissors cut out a butterfly in a bubble from the Woodland Wishes paper and adhere to the top of the banner 6. From the Blowing Bubbles page use detail scissors (or a 1 3 8circle punch) to cut out the bubble shown. Fussy cut the two butterflies from the Rainbow Sparkles cut apart page. Adhere these two butterflies to the bubble and attach this element to the front of the card with foam adhesive as shown. 7. Cut a piece from the B-side of Fairie Wings to measure 2½” x 2½” and adhere it to the front of the ivory tag. Add a ¼” x 2½” piece of the B-side of Daffodil Dance along the top and bottom as shown. Trim out the dancing fairies cut apart from the Butterfly Whimsey page and add to the front of the tag. 4502045 Designed by ~ Ginger Ropp Graphic 45® Supplies: 1 ea Fairie Wings 8x8 Paper Pack (4502082) 1 pk Fairie Wings Ephemera Cards (4502087) 1 ea G45 Staples ATC Tags—Ivory (4500846) 1 pk G45 Card Set & Envelopes—Ivory (4501988) Additional Supplies, Tools, Adhesives & Ink: Paper trimmer, detail scissors, ruler, scoring tool, bone folder, wet & dry adhesives, foam adhesive — Fairie Wings Card Set — Notes: For a fun, detailed video tutorial, visit our YouTube page! • Measurements are width x height unless specified. Optional: Distress paper edges with distress ink before adhering to the card bases. The following instructions are for three cards. You can then use the remaining supplies provided in your kit to complete three additional cards if you desire..

Upload: others

Post on 31-Aug-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Fairie Wings — Hidden Tag Card Set sheets...to the top, bottom and right hand side creating a pocket. Adhere it to the front of the card lining up the right side leaving an even

G45 Card Club Vol. 8 – 2020 : Featuring - Fairie Wings

Fairie Wings — Hidden Tag Card Set

www.g45papers.com | [email protected] pg 1 of 2

Card #1

1. Cut a piece from the B-side of Daffodil Dance to measure 3¾” x 5” and adhere this to the inside a card base. Adhere the B-side of the “Dreams” 3” x 4” journal card to the center of the Daffodil Dance piece.2. Trim out the butterfly cut apart from the Butterfly Whimsey page (make sure you trim out the border strips first as these will be used later.) Adhere this element to the left side of the journaling card (see photo for placement).3. Cut a piece of Daffodil Dance to measure 2” x 5¼” and adhere this to the left hand side of the front of the card leaving an even border along top, bottom and left side.4. Trim off the yellow floral border from the Fairy 4” x 6” journal card. (This piece should measure approximately 3¼” x 5¼” once trimmed.) Apply adhesive to the top, bottom and right hand side creating a pocket. Adhere it to the front of the card lining up the right side leaving an even border as shown. 5. Trim out the “Leave a little Sparkle” cut apart element from the Butterfly Whimsey page adhere this to the front of the card using foam adhesive (see photo for placement). Cut a piece from the B-side of Daffodil Dance to measure ¾” x 1¼” and flag the end and adhere to the upper right hand corner using foam adhesive. Using a ¾” circle punch or your scissors cut out a butterfly in a bubble from the Woodland Wishes paper and adhere to the top of the banner6. From the Blowing Bubbles page use detail scissors (or a 13 ⁄8” circle punch)to cut out the bubble shown. Fussy cut the two butterflies from the Rainbow Sparkles cut apart page. Adhere these two butterflies to the bubble and attach this element to the front of the card with foam adhesive as shown.7. Cut a piece from the B-side of Fairie Wings to measure 2½” x 2½” and adhere it to the front of the ivory tag. Add a ¼” x 2½” piece of the B-side of Daffodil Dance along the top and bottom as shown. Trim out the dancing fairies cut apart from the Butterfly Whimsey page and add to the front of the tag.

4502045

Designed by ~ Ginger RoppGraphic 45® Supplies:1 ea Fairie Wings 8x8 Paper Pack (4502082) 1 pk Fairie Wings Ephemera Cards (4502087) 1 ea G45 Staples ATC Tags—Ivory (4500846) 1 pk G45 Card Set & Envelopes—Ivory (4501988)

Additional Supplies, Tools, Adhesives & Ink:Paper trimmer, detail scissors, ruler, scoring tool, bone folder, wet & dry adhesives, foam adhesive

— Fairie Wings Card Set —

Notes: • For a fun, detailed video tutorial, visit our YouTube page!• Measurements are width x height unless specified.• Optional: Distress paper edges with distress ink before

adhering to the card bases.• The following instructions are for three cards. You can

then use the remaining supplies provided in your kit to complete three additional cards if you desire..

Card #1 Card #1

Page 2: Fairie Wings — Hidden Tag Card Set sheets...to the top, bottom and right hand side creating a pocket. Adhere it to the front of the card lining up the right side leaving an even

Card #21. Cut a piece from the B-side of Magic Meadows to measure 5” x 3¾” and adhere it to the inside of the card. Adhere the B-side of the “Dream” 3” x 4” journal card. Cut a ¾” x 2¾” from the B-side of Daffodil Dance and flag the end and adhere to the inside of the card along the left. Fussy cut a butterfly from Woodland Wishes and adhere.2. Cut a piece from the B-side of Magic Meadows to measure 5¼” x 4” and adhere to the front of the card. Trim the border strip from the Butterfly Whimsey cut apart page to measure 5¼” and attach approx 1 ⁄8” from the top of the front of the card3. Trim the “Find the Magic” 4” x 6” journal card to measure 5¼” x 3¼” and adhere the trimmed card along the left right, and bottom to the front of the card lining up the bottom edge with the striped paper (the top is open for the tag).4. Fussy cut the large floral images from the “Make a Wish” journaling card and add them to the upper left hand corner with foam adhesive. Use double sided tape to add the single flower to the top of the border strip tucking it inside the pocket. Fussy cut the smaller butterfly from 3” x 4” journal card.5. Cut a piece from the B-side of Tiny Blossoms to 2½” x 2½” and adhere to the front of the tag. Add a ¼” x 2½” strip of Magic Meadows B-side along the top of the tag. Trim out the fairy element from Butterfly Whimsey, add to the center and place in the pocket.

1. Cut a piece from the B-side of Woodland Wishes to measure 3¾” x 5” and adhere this to the inside. Center the B-side of the “Magical Things” 3” x 4” journal card in the center. Trim a border strip from Butterfly Whimsey to measure 3¾” and adhere to the top. Using detail scissors (or a 1” circle punch) trim a fairy in a bubble from the Blowing Bubbles paper. Cut a ¾” x 1¼” piece of Fairie Wings B-side and flag the ends. Attach these elements to the lower right hand corner as shown.2. Cut a piece from the B-side of Blowing Bubbles to measure 4” x 5¼” and attach to the front of the card. (Cut this piece from the bottom of the page saving the word “Dream” to be fussy cut.) Cut a 3½” x 4½” piece from Fairie Wings B-side and adhere to the center of the card front, aligning the right hand edge.3. Trim off the blue gingham border from the “Leave a little Sparkle” 4” x 6” journaling card. Adhere along the top, right, and bottom edges to create a left-hand pocket for the tag. 4. Fussy cut the word “Dreams” from the B-side of Blowing Bubbles and add to the card with foam adhesive. Fussy cut the daffodils, and purple flowers from a scrap of Magic Meadows. Fussy cut a fairy from Blowing Bubbles paper and adhere to the front of the card with foam tape as shown in the photo. Trim out the fairy element from the Butterfly Whimsey page and add with foam adhesive along the right hand side only (make sure not to glue the pocket closed).5. Cut a 2½” x 2½” piece from the B-side of Fairie Wings and adhere to the front of the tag. Trim a border strip from Butterfly Whimsey to measure 2½”. Add a fussy cut purple flower and the cut apart element. Insert the tags into card pockets!

Remember, your kit contains enough supplies to create an additional 3 cards!

For more inspiration check out the Graphic 45 blog, Instagram and YouTube Channel!

G45 Card Club Vol. 8 – 2020 : Featuring - Fairie Wings

Fairie Wings — Hidden Tag Card Set

www.g45papers.com | [email protected] pg 2 of 2

4502045

Card #2Card #2

Card #3