1080P Turret &Bullet CameraUser Manual

Regulatory Informa nFCC Informa nFCC compliance: This equipment has beentested and found to comply with the limits for adigital device, pursuant to part 15 of the FCCRules. These limits are designed to providereasonable prot n against harmfulinterference when the equipment is operated ina commercial environment. This equipmentgenerates, uses, and can radiate radiofrequency energy and, if not installed and usedin accordance with the ins n manual, maycause harmful interference to radiocommunica . Opera n of this equipment ina residen l area is likely to cause harmfulinterference in which case the user will berequired to correct the interference at his ownexpense.

FCC s

This device complies with part 15 of the FCCRules. Opera on is subject to the following twoc :1. This device may not cause harmful

interference.2. This device must accept any interference

received, including interference that maycause undesired opera n.

EU Conformity Statement

upon the purchase of equivalent new equipment,or dispose of it at designated collection points.For more information see: www.recyclethis.info.

2006/66/EC (ba ery dire ve):This product contains a ba ery thatcannot be disposed of as unsortedmunicipal waste in the European

Union.

See the product documenta n for specificba ery informa on. The ba ery is marked withthis symbol, which may include le ering toindicate cadmium (Cd), lead (Pb), or mercury (Hg).

2012/19/EU (WEEE dire ve):Products marked with this symbolcannot be disposed of as unsortedmunicipal waste in the EuropeanUnion. For proper recycling, returnthis product to your local supplier

This product and - if applicable - thesupplied accessories too are markedwith "CE" and comply therefore withthe applicable harmonized European

standards listed under the Low Voltage Direc ve2006/95/EC, the EMC Dir ve 2004/108/EC,the RoHS Dire ve 2011/65/EU.

1.2 Overview1.2.1 Overview of Type I Camera

1.2.2 Overview of Type CameraII

HD Video Cable

Enclosure

Zoom & Focus

Lock ScrewLock

Moun g Base

Camera

Power Cable

Power Cable

IR LED

Lens

Main Body

Sun ShieldMoun g Base HD Video Cable

CVBS Cable

Zoom

Focus

1 Intr n1.1 Product FeaturesThis camera adopts new genera n sensor withhigh y and advanced circuit board designtechnology. It possesses the features of highr , low dist , and low noise, etc. It isextremely suitable for supervisory system andimage processing system.The main features are as follows:

High performance CMOS sensor and highre n bring high-quality image;Low illumina ;Support IR cut filter with auto switch;OSD menu, parameters are configurable;Support auto white balance, auto gain control,electronic shu er control and internalsynchroniza ;SMART IR mode;Unit transmission control;Advanced 3-axis design meets differentinstalla on requirements.

Please make sure that the device in the packageis in good c n and all the assembly partsare included.Make sure that all the related equipment ispower-off during the installa on.Check the specifica on of the products for theinstalla n environment.Check whether the power supply is matchedwith your power output to avoid damage.Please make sure the wall is strong enough towithstand three s the weight of the cameraand the moun .If the wall is the cement wall, you need to insertexpansion screws before you install the camera.If the wall is the wooden wall, you can useself-tapping screw to secure the camera.If the product does not n properly,please contact your dealer or the nearestservice center. Do not disassemble the camerafor repair or maintenance by yourself.

2.1 Installa n of Type CameraISteps:1.Drill the screw holes and the cable hole on theceiling according to the supplied drill template.

Figure 2-1 The Drill Template

2 to disassemble the camera.from the moun g base.

3.Fix the moun g base to the ceiling.

Figure 2-2 Release The Lock Screw

For proper recycling, return the ba ery to yoursupplier or to a designated c n point. Formore informa n see: www.recyclethis.info.

2 Installa nBefore you start:

Thank you for purchasing our product. If thereare any ques ons, or requests, please do nothesitate to contact the dealer.

This manual may contain several technicalincorrect places or prin g errors, and thecontent is subject to change without .The updates will be added to the new version ofthis manual. We will readily improve or updatethe products or procedures described in themanual.

DISCLAIMER STATEMENTUnderwriters Laboratories Inc. (”UL” has not)tested the performance or reliability of thesecurity or signaling aspects of this product.UL has only tested for fire, shock or casualtyhazards as outlined in Ul’s Standard(s) for Safety,UL60950-1. UL Cer fica on does not cover theperformance or reliability of the security orsignaling aspects of this product. UL MAKES NOREPRESENTATIONS, WARRANTIES ORCERTIFICATIONS WHATSOEVER REGARDINGTHE PERFORMANCE OR RELIABILITY OF ANYSECURITY OR SIGNALING RELATED FUNCTIONSOF THIS PRODUCT.

Figure 1-1 Overview of Type I Camera

Figure 1-2 Overview of Type CameraII

HD-TVI

Release the lock screw

3 Menu Operation

Figure 3-1 Main Menu

Menu

SCENE LENS RESETEXPOSURE WB DAY&NIGHTBACKLIGHT NR SPECIAL ADJUST

INDOOR

OUTDOOR

INDOOR1

LOW-LIGHT

MANUAL SHUTTER

AGC

SENS-UP

BRIGHTNESS

D-WDR

DEFOG

BLC

HSBLC

ATW

AWC-SET

INDOOR

OUTDOOR

MANUAL

COLOR

B/W

EXT

2D NR

3D NR

CAMTITLE

D-EFFECT

MOTION

PRIVACY

LAUGUAGE

DEFECT

VERSION

SHARPNESS

MONITOR

LSC

VIDEO.OUT

EXIT

SETUP

3.1 VIDEO.OUTPAL or NTSC is selectable .3.2 LANGUAGEEnglish, Japanese, CHN1, CHN2, Korean, German,French, Italian, Spanish, Polish, etc., are selectable.3.3SETUP3.3.1 SCENEYou can select indoor, outdoor, indoor 1 and low-light as the working environments.3.3.2 LENSThe camera is equipped with a fixed lens.3.3.3 EXPOSURE

EXPOSURE

1. SHUTTER AUTO2. AGC OFF3. SENS-UP ---4. BRIGHTNESS ---|------ 405. DEFOG OFF6. BACKLIGHT OFF7. RETURN RET

Figure 3-2 Exposure

SHUTTER: AUTO,1/25, 1/50, FLK, 1/200, 1/400,1/1k, 1/2k, 1/5k, 1/10k, 1/50k are selectable.

: You can set the AGC value from 0 to 15.AGC: You can set the SENS-UP to OFF or AUTO.SENS-UP

: You can set the brightness valueBRIGHTNESSfrom 1 to 100.

: You can set the defog function as ON toDEFOGenable the function. Position, size, and the defoggradation are configurable.

3.3.4 BacklightBacklight Compensation (BLC):

Set the gain of BLC as High, Middle, or Low.-GAIN:Press the up/down/left/right button to-AREA:

define the BLC position and size. Select RET orAGAIN to go back the BLC menu or re-define the

BLC area.Restore the BLC settings to the default.-Default:

HSBLC: Select an HSBLC area. Set the DISPLAYstatus as ON. Press the up/down/left/right buttonto define the area position and size. Set the HSBLCLEVEL from 0 to 100. Select ALL DAY or Night for theHSBLC mode. Set the BLACK MASK status as ON orOFF.

HSBLC

1. SELECT AREA 12. DISPLAY ON3. LEVEL ---|------ 404. MODE ALL DAY5. BLACK MASK ON6. DEFAULT7. RETURN RET

Figure 3-3 HSBLC

3.3.5 White Balance (WB)INDOOR, OUTDOOR, MANUAL, ATW (Auto-trackingWhite Balance), AWC→SET are selectable.3.3.6 Day & NightColor, B/W, and EXT are selectable for DAY andNIGHT switches.3.3.7 NR

: You can set 2D NR status as ON or OFF.2D NR: Set the Smart NR status as ON and adjust3D NR

the 3D smart NR sensitivity ranges from 0 to 100.Set the 3D NR LEVEL ranges from 0 to 100. Set the

2D&3D NR

1. 2DNR OFF2. 3DNR ON3. RETURN RET

3D NR1. SMART NR ON2. LEVEL ------|--8 03. START. AGC -|--------104. END. AGC -|--------105. RETURN RET

Figure 3-5 NR Figure 3-6 3D NR

3.3.8 SPECIALEdit the camera title on this section.Camera Title:

D-effect:Set the freeze function as ON or OFF.-FREEZE:

OFF, MIRROR, V-FLIP, and ROTATE are-MIRROR:selectable for mirror.

Define the zoom area by configuring-D-ZOOM:the position from PAN & TILT.

The D-Zoom area, sensitivity-SMART D-ZOOM:and time are configurable.

Set the NEG IMAGE as ON or OFF.-NEG.IMAGE:SPECIAL

1. CAM TITLE ON2. D-DFFECT3. MOTION OFF4. PRIVACY OFF5. LANGUAGE ENG6. DEFECT7. VERSION 1307228. RETURN RET

Figure 3-7 Special

MOTION

1. SELECT AREA 12. DISPLAY ON3. SENSITIVITY ----|---- 304. MOTION VIEW ON5. DEFAULT6. RETURN RET

Figure 3-8 Motion Detection

Motion : Select a MOTION area. Set the DISPLAYstatus as ON or OFF. Press the up/down/left/rightbutton to define the position and size of the area.Set the SENSITIVITY from 0 to 60. Set the MOTIONVIEW status as ON or OFF.

Privacy: Select a PRIVACY area. Set the DISPLAYstatus as INV, MOSAIC, COLOR or OFF. Press theup/down/left/right button to define the positionand size of the area.Defect: LIVE DPC, STATIC DPC and Black DPC areadjustable in this section.

: You can check the software version of theVersiondevice.

PRIVACY

1. SELECT AREA 12. DISPLAY MOSAIC3. COLOR 104. TRANS. 15. DEFAULT6. RETURN RET

ADJUST

1. SHARPNESS --------|152. MONITOR LCD3. LSC OFF4. VIDEO. OUT PAL5. RETURN RET

3.3.9 ADJUST: Adjust the sharpness from 0 to 15.Sharpness

: Monitor CRT, and Monitor LCD areMonitorselectable.

: Set the LSC status as ON or OFF.LSC

3.3.10 RESETReset all the settings to the default.3.3.11 EXITPress OK to exit the menu.

START. AGC level as the threshold to enable AGC,and set the END. AGC level as the threshold todisable AGC.

Figure 3-9 Privacy Mask Figure 3-10 Adjust

Steps:1.Drill the screw holes and the cable hole in the

ceiling according to the supplied drill template.2.Hammer the supplied plastic expansion bolt into

the screw holes.

2.2 Installation of Type IICamera

Figure 2-5 Drill Template

Figure 2-6 Fix the Camera to the Ceiling

Figure 2-7 3-axis Adjustment

5. Adjust the surveillance angle.1). Loosen No.1 adjusting screw to adjust the pan

position (0 ~ 360 ).° °2).Tighten No.1 adjusting screw.3). Loosen No.2 adjusting screw to adjust the

tilting position(0 ~ 90 ).° °4).Tighten No.2 adjusting screw.5). Loosen No.3 adjusting screw to adjust the

rotation position 0 ~ 360 .( ° °)6).Tighten No.3 adjusting screw.

3.Route the cables to the cable hole and connectthe corresponding cables.

4.Fix the camera to the ceiling with the suppliedscrews.

A coaxial camera controller (purchase separately)is required to select the menu and adjust thecamera parameters.

4.Route the cables to the cable hole and connectthe corresponding cables.5.Secure the camera to the mounting base bytightening the lock screw.6.Adjust the camera according to the figure belowto get an optimum angle.

Figure 2-3 3-axis Adjustment

7.Use the screwdriver to adjust the ZOOM screwand the FOCUS screw until you get the optimumimage.

Figure 2-4 Zoom and Focus Adjustment

Both wall mounting and ceiling mounting aresuitable for type bullet camera. Ceiling mountingwill be taken as an example in the section. And youcan take steps of ceiling mounting as a referenceif wall mounting is adopted.

0~3600~360

09~0

1

2

3