fci ophthalmics product catalog full catalog 2013-opt.pdfthe tapered shaft design helps to anchor...
TRANSCRIPT
FCI Ophthalmics
Product Catalogwww.FCI-Ophthalmics.com
800.932.4202
TABLE OF CONTENTS
DRY EYESnug Plugs™ 1
Ready-Set Punctum Plugs 1
PVP Perforated Plugs 1
Tearsaver Plugs 2
Non-Sterile Plugs 2
Punctal Gauges for Tearsaver Plugs 2
Punctal Gauges for “Ready-Set” Plugs 2
Reusable Double Dilator 3
Temporary Collagen Plugs 3
Prolong™ Absorbable Long Term Plugs 3
Zone-Quick 3
LACRIMAL STENTS & TUBESSelf-Retaining Bicanaliculus Intubation Set 4
Crawford Bicanaliculus Intubation 4
Mono-Crawford 4
Bika-Bicanaliculus Intubation 5
Infant Bika-Bicanaliculus Intubation 5
Goldberg Bicanalicular Cerclage 5
Wide/Medium Collarette Monoka 5
Ritleng Probe 6
Ritleng Bicanaliculus Intubation 8 6
Self-Threading Monoka 6
Ritleng Probe Procedure 7
Masterka 8
Mini Monoka 8
Necessary Instruments 8
Disposable Punctum Dilator and Plug Inserter 8
LID REPAIROcular Shield 9
Ptose-Up 9
Wright Fascia Needle 9
Ptosis Slings 9
Blinkeze™ External Eyelid Weights with Treatment Kit 10
Thinprofile™ Lid Weights 10
Contour™ Lid Weights 11
Tantalum Eyelid Weight Sizing Sets 11
ORBITAL IMPLANTSBioceramic Orbital Implants 12
Silicone Orbital Implants 12
Sphere Introducer 12
Enucleation/Evisceration Disposable Sizers 12
Ti/HA Peg & Sleeve System 13
Orbital Tissue Expander (OTE) 13
Silicone Conformer 13
Perforated Conformers 13
Symblepharon Rings 13
CATARACT Morcher® Capsular Tension Rings 14
Henderson Capsular Tension Rings 14
EyeJet 15
Geuder® Capsular Tension Ring Injector 15
Cionni Capsular Tension Rings 16
9–0 Polypropylene Suture Non-Absorbable 16
Ahmed Capsular Tension Segment 17
Morcher® Pupil Dilator 17
Geuder® Pupil Dilator Injector 17
Iris Retractors 18
Mackool Cataract Support System 18
Ring Calipers 18
Kitaro Dry/Wet Lab Kits 19
Kitaro Cataract Complex Case Labs 20
800.932.4202
DRY EYE ProductsFCI-Ophthalmics.com
S2-4002u
One size fits all
READY-SET PUNCTUM PLUGSDesigned by J.A. Bernard, M.D.
Ultra-thin collarette conforms to natural anatomy
of the eyelid for maximum patient comfort.
Preloaded on disposable inserter/dilator instrument
for ease of insertion. Easily removed with forceps.
For punctal occlusion
Medical grade silicone
Individually sterile-packaged 2 preloaded
plugs per box
Slim Plugs
The Slim Mini and Slim Petite plugs offer a slightly
smaller bulb for easier insertion into small puncta.
Exclusive Slanted Collarette Plugs
The Micro to Large plugs feature the unique slanted
collarette that hugs the natural curve of the eyelid.
The slightly larger bulb resists migration and is
designed to prevent rubout.
1
SNUG PLUGS™
Plugs are packaged preloaded in a stretched
position and return to their natural shape
when released from inserter
For punctal occlusion
Medical grade silicone
Individually sterile-packaged 2 preloaded
plugs per box
Note - Verify to ensure plug has released in
punctum before removing inserter
S2-3632u
Slim Mini 0.4 mm
S2-3642u
Slim Petite 0.5 mm
S2-3652u
Micro 0.6 mm
S2-3672u
Mini 0.7 mm
S2-3422u
Small 0.8 mm
S2-3122u
Medium 0.9 mm
S2-3522u
Large 1.0 mm
S1-3522u
PVP Mini 0.7 mm
S1-3512u
PVP Medium 0.9 mm
PVP PERFORATED PLUGSDesigned by J.A. Bernard, M.D. These plugs are
coated with a thin layer of polyvinylpyrrolidone
(PVP) that makes the surface slick to prevent debris
from collecting on its surface and enhance drainage.
For partial occlusion/punctal stenosis
Medical grade silicone with PVP coating
Individually sterile-packaged 2 preloaded
plugs per box
0.4 mm 0.6 mm
The stamped likeness of the plug on the
instrument indicates the direction of the collarette slant.
Slim PlugsSlanted Collarette Plugs
Pre-stretched Snug Plug Natural Shape of Snug Plug
in Punctum
PUNCTAL GAUGES FOR “READY-SET” PLUGSEach instrument has one gauge size on one end,
and a different gauge size on the opposite end.
For proper plug sizing
Stainless steel
Non-sterile
S2-3060u
Set includes 6 gauge sizes (3 instruments) in autoclavable sterilizing case
PUNCTAL GAUGES FOR TEARSAVER PLUGSEach instrument has one gauge size on one end,
and a different gauge size on the opposite end.
For proper plug sizing
Stainless steel
Non-sterile
814434
Set includes 4 gauge sizes (2 instruments) in autoclavable sterilizing case
FCI-Ophthalmics.com
TEARSAVER PLUGSThe tapered shaft design helps to anchor the
plug securely in the punctum for more comfort
and less risk of rub-out.
Preloaded on disposable inserter/dilator
instrument for ease of insertion.
For Punctal Occlusion
Medical Grade Silicone
Individually sterile-packaged 2 preloaded
plugs per box
814004 0.4 mm
814005 0.5 mm
814006 0.6 mm
814007 0.7 mm
814008 0.8 mm
24 Plugs Per Box, 2 Inserters
S2-3324u
Slim Mini 0.4 mm
S2-3424u
Slim Petite 0.5 mm
S2-3524u
Micro 0.6 mm
S2-3724u
Mini 0.7 mm
S2-3624u
Variety Pack 6 each of 0.4 mm, 0.5 , 0.6 and 0.7 mm
NON-STERILE PLUGSReady-Set plugs are pre-mounted on a wheel
for quick and easy loading onto a plug inserter
All wheels are packaged with 2 inserters
For Punctal Occlusion
Medical Grade Silicone
2
DRY EYE Products
REUSABLE DOUBLE DILATORStainless steel
Non-sterile
S2-3070u
Fine & Medium Tapers Box of 1, non-sterile
TEMPORARY COLLAGEN PLUGSTo diagnose dry eye
To assess the effectiveness of permanent
punctal occlusion
Collagen-dissolvable in 5–7 days
Sterile
6 plugs per packet/12 packets per box (72 total)
Variety Pack: 6 plugs per packet/4 packets of
each size per box (72 total). All 2 mm long.
CP-0002 0.2 mm
CP-0003 0.3 mm
CP-0004 0.4 mm
CP-0234 Variety Pack
PROLONG™ ABSORBABLE LONG TERM PLUGS
For short term dry eye conditions
For post surgical dry eye symptoms
Absorbable copolymer—lasts up to 3 months
Sterile
2 plugs per pouch, 10 pouches per box (20 total).
All 2 mm long.
TP-3000 0.3 mm
TP-4000 0.4 mm
TP-5000 0.5 mm
TP-3450 Variety Pack3x 0.3 mm pouches5x 0.4 mm pouches2x 0.5 mm pouches
ZONE-QUICKZone-Quick is a simple and accurate system
that measures tear volume in just 15 seconds
per eye. Each box has an easy to read
diagnostic indicator ruler.
For tear volume measurement
Phenol red thread tear test
Results ready in 15 seconds
Sterile
ZQ-1010
100 threads, 50 pairs per box
3
TO PLACE AN ORDER
T: 800.932.4202 F: [email protected]
LACRIMAL STENTS & TUBES
S1-1290u
25 mm 1 sterile set per box
S1-1291u
30 mm 1 sterile set per box
S1-1292u
35 mm 1 sterile set per box
Disposable Sizers
S1-1289u
POM (PolyOxy-Methylene) Stainless Steel, Box of 5, sterile
S1-1270u
Box of 3, sterile
Crawford Hook
S1-1275u
Stainless Steel, Box of 1, non-sterile
S1-1913u
Mono-CrawfordWide Collarette4 mm Box of 3
S1-1941u
PVP Mono-CrawfordMedium Collarette3 mm Box of 1
S1-1943u
PVP Mono-CrawfordMedium Collarette3 mm Box of 3
S1-1951u
PVP Mono-CrawfordWide Collarette 4 mm Box of 1
S1-1953u
PVP Mono-CrawfordWide Collarette4 mm Box of 3
Disposable
Sizer
S1-1901u
Mono-CrawfordMedium Collarette3 mm Box of 1
S1-1903u
Mono-CrawfordMedium Collarette3 mm Box of 3
S1-1911u
Mono-CrawfordWide Collarette4 mm Box of 1
Crawford Hook
SELF-RETAINING BICANALICULUS INTUBATION SET (SRS)Designed by P. Bigé, M.D.
For horizontal lacrimal duct obstruction
Punctal stenosis
Silicone
Set includes: Stent and disposable dilator
REQUIRES: Disposable Sizer S1-1289u
CRAWFORD BICANALICULUS INTUBATIONFor canalicular stenosis
Silicone tubing covers probe
Stainless steel probe with non-traumatic
rounded olive tip
REQUIRES: Crawford Hook S1-1275u
MONO-CRAWFORDFor congenital lacrimal duct obstruction,
canalicular laceration
Single plug anchors stent at punctum
Sterile
Recommended: Disposable Punctum Dilator
& Plug Inserter S1-3090u (page 8)
REQUIRES: Crawford Hook S1-1275u
4
TO PLACE AN ORDER
T: 800.932.4202 F: [email protected]
BIKA-BICANALICULUS INTUBATIONDesigned by J.A. Bernard, M.D.
For Canalicular Stenosis
Stainless steel probe with silicone tubing
swaged into probe
Non-traumatic rounded tip
S1-1000u
Box of 3, sterile
S1-1100u
Box of 3, sterile
S1-1900u
Box of 3, sterile
Pigtail Probe
PT-1000u
Stainless SteelBox of 1, non-sterile
Pigtail Probe
PT-2000u
Stainless SteelPediatric ModelBox of 1, non-sterile
INFANT BIKA-BICANALICULUS INTUBATIONDesigned by J.A. Bernard, M.D.
For Infant Canalicular Stenosis/DCR
Stainless steel probes entirely embedded in
silicone tubing
Recommended for DCR because of its high flexibility
GOLDBERG BICANALICULAR CERCLAGEDesigned by R.A. Goldberg, M.D.
For Reconstruction, Trauma & Chronic
Stenosis of the Canalicular System
Silicone, blue polypropylene suture
REQUIRES: Pigtail Probe PT-1000 or PT-2000
WIDE/MEDIUM COLLARETTE MONOKADesigned by B. Fayet, MD. and J.A. Bernard, M.D.
Stent is securely anchored at punctum by plug.
No knots or sutures necessary.
For Congenital Nasolacrimal Duct Obstruction
or for Canalicular Laceration
Silicone, stainless steel
Non-traumatic rounded tip
Silicone tubing swaged into malleable stainless steel probe
Recommended: Disposable Punctum Dilator & Plug Inserter S1-3090u (page 8)
5
Pigtail Probe
S1-1630u
Wide 4 mm, Box of 3, sterile
S1-1710u
Med. 3 mm, Box of 3, sterile
RITLENG PROBE–STEP-BY-STEP PROCEDUREThe Ritleng Probe is backed out of the lacrimal ducts and separated from the PEEK thread-guide
at its thinner section (lighter portion of the thread) by sliding it out from the open slit that lines
the entire length of the probe.
STEP 1 STEP 2
STEP 4STEP 3
S1-1800u
Wide 4 mm, Box of 3, sterile
S1-1801u
Wide 4 mm, Box of 1, sterile
S1-1810u
Med. 3 mm, Box of 3, sterile
S1-1811u
Med. 3 mm, Box of 1, sterile
S1-1820u
Wide 4 mm (PVP), Box of 3, sterile
S1-1821u
Wide 4 mm (PVP), Box of 1, sterile
S1-1450u
Box of 3, sterile
S1-1451u
Box of 1, sterile
S1-1490u
(PVP), Box of 3, sterile
S1-1491u
(PVP), Box of 1, sterile
These unique systems use PEEK as a thread-guide reducing time and trauma in lacrimal
duct intubation. The hollow Ritleng Probe is inserted into the nasolacrimal duct and a thin
PEEK thread-guide is fed through it. The probe is then withdrawn leaving the PEEK to pull
the silicone tubing into place.
The PVP models are coated with a thin Polyvinylpyrrolidone (PVP) coating that makes the
surface slick to prevent debris from collecting on the surface and enhance tear drainage.
SELF-THREADING MONOKADesigned by B. Fayet, M.D., J.A. Bernard, M.D.
and P. Ritleng, M.D.
For congenital lacrimal duct obstruction,
monocanalicular laceration
Silicone, Black PEEK (PolyEtherEtherKetone)
Thread-Guide
Securely anchored at punctum by plug
No knots or sutures necessary
Recommended: Disposable Punctum Dilator
& Plug Inserter S1-3090u (page 8)
RITLENG BICANALICULUS INTUBATIONDesigned by P. Ritleng, M.D.
For lacrimal duct stenosis, canalicular laceration, DCR
Silicone, Black PEEK (PolyEtherEtherKetone)
Thread-Guide
Silicone tubing (L: 300 mm, Diam: 0.64 mm)
REQUIRES: Ritleng Probe S1-1460u (page 8)
Ritleng Hook S1-1480u (page 8)
6
REQUIRES: Ritleng Probe S1-1460u (page 8)
Ritleng Hook S1-1480u (page 8)
LACRIMAL STENTS & TUBES
RITLENG PROBE PROCEDUREFigure 1
Following dilation and preliminary probing of lacrimal ducts, the Ritleng
Probe (S1-1460u) is introduced into the canaliculus and nasolacrimal
duct until contact is made with the nasal fossa floor.
The probe is pulled back slightly (1 cm) to facilitate the introduction of
the PEEK thread-guide into the nasal cavity.
The probe is oriented with its slit side facing anteriorly and pushed
backwards so that the interior end of the probe is facing anterior, thus
directing the PEEK towards the front of the nasal cavity.
The PEEK is threaded through the probe to obtain a large loop which
spreads out in the nasal cavity making it easy to locate.
Retrieval of the black PEEK is easy when it appears in the anterior portion
of the nose.
The PEEK is retrieved under nasal illumination and visual control (nasal
endoscope) with endonasal forceps or with the Ritleng Hook (S1-1480u).
Figure 2
If the PEEK thread-guide is not easily located in the anterior portion of
the nose, or if it takes a posterior direction, the following technique is
used for retrieval:
The probe is introduced until contact is made with the nasal fossa floor.
Metal-to-metal contact is made using the Ritleng Hook (S1-1480u)
high up in the inferior meatus near the exit of the nasolacrimal duct.
Figure 3
The probe is then rotated 180º while keeping the metal-to-metal contact
with the hook thus orienting its inferior opening towards the back. The
hook should be above the probe’s opening and the PEEK. This will enable
the hook to catch the PEEK loop when removing from the nose.
Figure 4
The probe is slowly backed out of the inferior meatus and as soon as the
metal-to-metal contact between the probe and the hook is lost, the
hook catches the PEEK loop and is carefully removed from the nose.
The probe is removed from the canaliculus and detached from the stent
by sliding the thinner lighter black portion of the PEEK out through the
probe’s slit.
The PEEK thread-guide is pulled out of the nose along with the attached
silicone tubing.
This same technique is used to intubate the second canaliculus in the
case of a bicanalicular intubation.
In the case of a monocanalicular intubation, the punctal plug at the
other end of the silicone tubing is seated in the punctum using a
Punctal Plug Dilator and inserter (S1-3090u).
TO PLACE AN ORDER
T: 800.932.4202 F: [email protected]
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
7
LACRIMAL STENTS & TUBES
8
NECESSARY INSTRUMENTSRitleng Hook, Non-sterile, Stainless Steel
S1-1480u Box of 1
Ritleng Probe, Non-sterile, Stainless Steel
S1-1460u Box of 1
Bowman Probes, Non-sterile, Stainless Steel
BP-9-011 Size 00 & 0
BP-9-012 Size 1 & 2
BP-9-013 Size 3 & 4, Box of 1
DISPOSABLE PUNCTUM DILATOR AND PLUG INSERTERRecommended for use with all monocanalicular
stents & tubes to seat the plug fixation heads
into punctum
Polypropylene, stainless steel
S1-3090u
Box of 3, sterile
S1-1500u
Box of 3, sterile
MINI MONOKADesigned by B. Fayet, M.D. and J.A. Bernard, M.D.
Stent is securely anchored at punctum by plug.
No knots or sutures necessary. Use Disposable
Punctum Dilator & Plug Inserter S1-3090u to
insert plug into punctum.
For Canalicular Lacerations involving
external 2/3 of one canaliculus
Silicone
REQUIRES: Disposable Punctum Dilator & Plug Inserter S1-3090u (page 8)
Ritleng Hook
Ritleng Probe
Bowman Probe
S1-1608
30 mm Box of 1, sterile
S1-1609
35 mm Box of 1, sterile
S1-1610
40 mm Box of 1, sterile
Disposable
Sizer
MASTERKA Designed by B. Fayet, M.D.
The MASTERKA is a “pushed” monocanalicular
nasolacrimal duct intubation stent that requires
no intranasal recovery and is anchored at the
punctum by a plug. Prior sizing is important for
proper stent selection.
For congenital lacrimal duct obstructions
Silicone stent pre-mounted on stainless
steel introducer
REQUIRES: Disposable Punctum Dilator & Plug Inserter S1-3090u (page 8)
Disposable Sizer S1-1289u (page 4)
LID REPAIRTO PLACE AN ORDER
T: 800.932.4202 F: [email protected]
PTOSE-UPDesigned by J.M. Ruban, M.D.
For Frontalis Suspension in patients with
significant ptosis and poor levator function.
Biocompatible, porous, inert, biointegratable,
non-toxic Ready-to-use, non-allergenic.
“The beauty of Ptose-Up is that it is easy to place
and adjust, while it provides an excellent eyelid
contour. Being an inert material, it can also be
removed easily in cases of overcorrection, or if
the patient is an adult with dry eye problems.”
Evan H. Black, M.D. Kresge Eye Institute, Detroit, MI
Material: ePTFE expanded Poly Tetra
Fluoro Ethylene
Porosity: 50 μm
Dimensions: 150 mm long and 2 or 3 mm wide,
0.35 mm thick
S3-3021u
Ptose-Up2 mm x 150 mm Box of 1, sterile
S3-3001u
Ptose-Up3 mm x 150 mmBox of 1, sterile
WRIGHT FASCIA NEEDLEMay be used with Ptose-Up.
Stainless Steel
WF-1000u
Box of 1, non sterile
LevatorMuscle
Sutures
Tarsus
EyebrowIncision
PTOSE-UP
Eyelid Incision
Incision
PTOSIS SLINGSDesigned by J.L. Llouquet, M.D. and
D. Guerin, M.D.
For Ptosis (with frontalis suspension)
Stainless steel needles, silicone tubing
S3-1000u
Ptosis Sling SetBox of 3, sterile
9
S6-2301
Box of 1, sterile
OCULAR SHIELDProtective eye shield with suction cup
for conventional lid surgery
LID REPAIR FCI-Ophthalmics.com
THINPROFILE™ LID WEIGHTSThinProfile™ Eyelid Implants are designed 40% thinner than the original FCI Contour™ Eyelid Implants, providing a sleek, spherical
curvature with tapered edges and smoothly rounded corners. The channel-free 1.0 mm holes permit added freedom in suturing
position. The overall dramatically lower profile of the new ThinProfile™ Eyelid Implant design permits a virtually undetectable
postoperative eyelid appearance.
Implantable and external eyelid weights for treatment of Lagophthalmos
THINPROFILE™ GOLD EYELID IMPLANTS
Standard Sizes–Thickness 0.6 mm
LL 4006 0.6 grams
LL 4008 0.8 grams
LL 4010 1.0 grams
LL 4012 1.2 grams
LL 4014 1.4 grams
LL 4016 1.6 grams
THINPROFILE™ PLATINUM EYELID IMPLANTS
Standard Sizes–Thickness 0.6 mm
LL 6006 0.6 gramsLL 6008 0.8 gramsLL 6010 1.0 gramsLL 6012 1.2 gramsLL 6014 1.4 gramsLL 6016 1.6 gramsLL 6018 1.8 grams
10
Weight Determination
The appropriate eyelid weight is determined preoperatively using
the FCI Eyelid Weight Sizing Set (TEW 7000). The proper weight
should allow the eyelid to close without difficulty and induce a
slight ptosis of no more than 1.0 mm, as the levator seems to
strengthen after implantation.
1
REQUIRED: Prior sizing. See Tantalum Eyelid Weight Sizing Sets (page 11)
BLINKEZE™ EXTERNAL EYELID WEIGHTS WITH TREATMENT KITStandard Width 5.0 mm
Item No. Description Nominal Length
TEW 6006 0.6 grams 17.1 mm
TEW 6008 0.8 grams 19.5 mm
TEW 6010 1.0 grams 11.9 mm
TEW 6012 1.2 grams 14.3 mm
TEW 6014 1.4 grams 16.7 mm
TEW 6016 1.6 grams 19.0 mm
TEW 6018 1.8 grams 21.4 mm
Special Sizes
TEW 6020 2.0 grams 23.8 mm
TEW 6022 2.2 grams 26.2 mm
TEW 6024 2.4 grams 28.6 mm
TEW 6026 2.6 grams 30.9 mm
TEW 6028 2.8 grams 33.3 mm
Replacement Eyeclose Adhesive Strips
LL 0505 for use with External Eyelid Weights, 100 strips
REQUIRED: Prior sizing and color selection.
See Tantalum Eyelid Weight Sizing Sets and Skin Tone Selector (page 11)
TO PLACE AN ORDER
T: 800.932.4202 F: [email protected]
CONTOUR™ LID WEIGHTSCONTOUR™ GOLD EYELID IMPLANTS
Standard Sizes–Thickness 1.0 mm, Width 5.0 mm
Item No. Description Nominal Length
LL 3006 0.6 grams 7.6 mm
LL 3008 0.8 grams 10.2 mm
LL 3010 1.0 grams 12.3 mm
LL 3012 1.2 grams 14.5 mm
LL 3014 1.4 grams 16.6 mm
LL 3016 1.6 grams 18.8 mm
LL 3018 1.8 grams 21.0 mm
Special Sizes
LL 3020 2.0 grams 23.1 mm
LL 3022 2.2 grams 25.2 mm
LL 3024 2.4 grams 27.3 mm
LL 3026 2.6 grams 29.4 mm
LL 3028 2.8 grams 31.5 mm
CONTOUR™ PLATINUM EYELID IMPLANTS
Standard Sizes–Thickness 1.0 mm
Item No. Description Item No. Description
LL 5006 0.6 grams LL 5014 1.4 grams
LL 5008 0.8 grams LL 5016 1.6 grams
LL 5010 1.0 grams LL 5018 1.8 grams
LL 5012 1.2 grams
Special Sizes
LL 5020 2.0 grams LL 5026 2.6 grams
LL 5022 2.2 grams LL 5028 2.8 grams
LL 5024 2.4 grams
TANTALUM EYELID WEIGHT SIZING SETSFor all Implants and/or External Weights
TEW 7000 Standard Sizing Set
Includes (7) weights from 0.6 to 1.8grams, storage case, (100) adhesive strips and a skin tone selector card.
TEW 7004 Special Sizing Set
Includes (5) weights from 2.0 to 2.8grams, storage case, (100) adhesive strips and a skin tone selector card.
Skin Tone Selector
Light-0 Pink/Neutral-1 Tan-2 Medium
Brown-3
Dark Brown-4
11
REQUIRED: Prior sizing. See Tantalum Eyelid Weight Sizing Sets below
ORBITAL IMPLANTS FCI-Ophthalmics.com
BIOCERAMIC ORBITAL IMPLANTSIntegrated implants for enucleation/evisceration
Improved structure for vascularization and
integration that is biocompatible, bioinert, nontoxic
and nonallergenic. The implants are stable, easily
hand-drilled and less sticky. Three unique choices
to suit performance standards.
Features
Porous, strong, non brittle
Rapid and complete fibrovascularization
Lightweight (half the weight of HA)
Easy to insert (no velcro effect)
Moistened wrapped implant readily
slips into orbit
Can be easily sutured to extra ocular muscles
Low exposure rate
Box of 1, sterile
SILICONE ORBITAL IMPLANTSFor enucleation/evisceration,
Medical grade silicone (translucent)
Box of 1, sterile
S6-1012u 12 mm
S6-1013u 13 mm
S6-1014u 14 mm
S6-1015u 15 mm
S6-1016u 16 mm
S6-1017u 17 mm
S6-1018u 18 mm
S6-1019u 19 mm
S6-1020u 20 mm
S6-1022u 22 mm
SPHERE INTRODUCER For inserting orbital implant into socket
Box of 1, sterile
S6-3050u
Stainless Steel
Mesh-Wrapped Bioceramic Orbital Implants
Aluminum Oxide, Vicryl Mesh, Silicone Band
S6-5316u 16 mmS6-5318u 18 mmS6-5320u 20 mmS6-5322u 22 mm
Egg-Shaped Bioceramic Orbital Implants
Aluminum Oxide
S6-5330u 18 mmS6-5340u 20 mm
Bioceramic Orbital Implants
Aluminum Oxide
S6-5112u 12 mmS6-5114u 14 mmS6-5116u 16 mmS6-5118u 18 mmS6-5120u 20 mmS6-5121u 21 mmS6-5122u 22 mm
ENUCLEATION/EVISCERATION DISPOSABLE SIZERS
To select accurate implant size
(POM) PolyOxyMethylene
S6-3060u
Box of 4, sterile
12 1
TO PLACE AN ORDER
T: 800.932.4202 F: [email protected]
S6-2081u
Set includes:1 titanium sleeve coated with hydroxyapatite1 drill for drilling HA implant1 screwdriver for screwing the sleeve into
the HA implant1 temporary flat head titanium peg1 sterile set per box
ORBITAL TISSUE EXPANDER (OTE)The OTE is an inflatable “balloon/expander”
that facilitates the normal growth of orbital
soft tissues and bone to achieve facial symmetry.
The OTE can be easily inflated and deflated
without additional surgeries.
OR-1000
Set includes:1 OTE1 3.2 cm bone plate1 2.6 cm bone plate1 2.0 cm bone plate1 sterile set per box
PERFORATED CONFORMERSTo maintain the conjunctival cul-de-sacs after
enucleation or evisceration without hindering lid
closure. Holes allow drainage of secretions and
administration of drops.
Polyamide 12
Translucent-3 sizes
S6-2230u
20 mm (s) Box of 1, sterile
S6-2231u
23 mm (m) Box of 1, sterile
S6-2232u
26 mm (lg) Box of 1, sterile
SYMBLEPHARON RINGSTo prevent retraction of the conjunctival
cul-de-sacs without touching the cornea
Edges are highly polished and atraumatic
PMMA (Polymethylmethacrylate)
Translucent-3 sizes
S6-2420u
20 mm (s) Box of 1, sterile
S6-2422u
22 mm (m) Box of 1, sterile
S6-2425u
25 mm (lg) Box of 1, sterile
S6-2080u
Set includes:1 titanium sleeve coated with hydroxyapatite1 drill for drilling HA implant1 screwdriver for screwing the sleeve into
the HA implant1 temporary flat head titanium peg4 permanent titanium pegs:
1 round headed peg3 skinny pegs1 sterile set per box
TI/HA PEG & SLEEVE SYSTEMThe titanium sleeve is coated with
hydroxyapatite (HA) which allows vascular ingrowth,
firmly secures the peg in the sphere, and enhances
biocompatibility.
To hold prosthetic eye
For improved
occular motility
SILICONE CONFORMERTo maintain the conjunctival cul-de-sacs after
enucleation or evisceration without hindering lid
closure. Holes allow drainage of secretions and
administration of drops.
Silicone
Translucent
S6-2001 Box of 1, sterile
2 13
FCI-Ophthalmics.com
MORCHER® CAPSULAR TENSION RINGS (CTR)The three rings are available in different
diameters to accommodate the variations in
the size of the individual patient’s capsular bag.
Morcher CTRs are designed to stabilize the
capsule. They may be inserted manually or
with the Geuder Injector G-32955.
Indications
Missing or damaged zonules
Lens subluxation
Pseudoexfoliation
Myopia
Zonulolysis
Soft IOL
Marfan’s Syndrome
Advantages
Circular expansion of capsular bags
Stable conditions during surgery
Improves IOL centration
Reduced risk of capsular fibrosis
Resists capsular shrinkage
MR-1400
Type 14Axial length <24 mm for normal eyes
MR-1410
Type 14AAxial length >28 mm for highly myopic eyes
MR-1420
Type 14CAxial length 24-28 mm for normal or myopic eyes
Box of 1, sterileMaterial: PMMA
CATARACT
HENDERSON CAPSULAR TENSION RINGS (HCTR)Designed by Bonnie Henderson, M.D
The HCTR is designed for easier cortical
removal while maintaining the desired
stretch around the capsular bag.
It may be inserted manually or with the
Geuder Injector G-32955.
Indications
Missing or damaged zonules
Lens subluxation
Pseudoexfoliation
Myopia
Zonulolysis
Soft IOL
Marfan’s Syndrome
Advantages
Circular expansion of capsular bags
Stable conditions during surgery
Improves IOL centration
Reduced risk of capsular fibrosis
Resists capsular shrinkage
Indentations allow to reach cortical material
that might be trapped by a standard CTR.
MR-10C
Type 10C
Box of 1, sterileMaterial: PMMA
12.30
10.00
14.50
12.00
13.00
11.00
Type 14 Axial length
<24 mm for normal eyes
Type 14C Axial length 24-28 mm
for normal or myopic eyes
12.10
11.00
Henderson Capsular
Tension Rings (HCTR)
Type 14A Axial length >28 mm
for highly myopic eyes
14 1
TO PLACE AN ORDER
T: 800.932.4202 F: [email protected]
EYEJETPreloaded Capsular Tension Ring on
disposable injector.
Choose Right for clockwise insertion,
Left for counterclockwise insertion.
GEUDER® CAPSULAR TENSION RING INJECTORThis reusable injector is designed for the clockwise,
one-handed implantation of the Morcher and
Henderson CapsularTensionRings.
G-32955
Reusable Injector for the Capsular Tension Ring
MR-14 Right
Preloaded Type 14 CTR
MR-14 Left
Preloaded Type 14 CTR
MR-14A Right
Preloaded Type 14A CTR
MR-14A Left
Preloaded Type 14A CTR
MR-14C Right
Preloaded Type 14C CTR
MR-14C Left
Preloaded Type 14C CTR
4 15
FCI-Ophthalmics.comCATARACT
CIONNI CAPSULAR TENSION RINGSDesigned by Robert J. Cionni, M.D.
Morcher’s Cionni Capsular Tension Rings are
designed to stabilize the capsular bag in cases of
damaged or missing zonules. These rings are
specially designed for scleral fixation with suture.
Indications
During cataract surgery, the Cionni Capsular
Tension Rings are implanted to stabilize and
recenter the capsular bag in the following cases:
Missing or damaged zonules larger than
4 clock hours
Lens subluxation
Pseudoexfoliation
Myopia
Zonulolysis
Soft IOL
Marfan's Syndrome
Advantages
May be fixated to the sclera
Promotes circular expansion of capsular bags
Stabilizes conditions during surgery
Improves IOL centration
Reduces risk of capsular fibrosis
Resists capsular shrinkage
Only MR-2C may be inserted with Geuder Injector (G-32955),
drawn up 3/4 of the way only
MR-1L
Type 1L 11 mm compressed
MR-2C
Type 2C 11 mm compressed
MR-2L
Type 2L 11 mm compressed
MR-1G
Type 1G 10 mm compressed
Box of 1, sterileMaterial: PMMA
9–0 POLYPROPYLENE SUTURE NON-ABSORBABLEThese 9-0 polypropylene sutures are stronger
and particularly suitable for fixating a Cionni
Capsular Tension Ring or for stabilizing an IOL.
These sutures are double-armed and packaged
in boxes of 12.
P9009062
Straight/90° Curved16 mm needle30 cm suture
P90062
Straight/Straight 16 mm needle20 cm suture
P90062-2
Straight/Straight16 mm needle5 cm suture
P9006062
Straight 16 mmCurved 6.2 mm30 cm suture
Type 1L
11 mm
Type 2C
11 mm
Type 2L
11 mm
Type 1G
10 mm
16 1
AHMED CAPSULAR TENSION SEGMENT (CTS)Designed by Ike Ahmed, M.D.
The CTS is designed for intraoperative capsular
support (secured by Iris Hook) or permanent
support (sutured to sclera).
Indications
Capsular Tension Segments are used to stabilize
and recenter the capsular bag in the following cases:
Significant zonular weakness
Lens subluxation
Pseudoexfoliation
Myopia
Zonulolysis
Soft IOL
Marfan’s Syndrome
Advantages
May be used intraoperatively, secured by an iris hook
May be fixated to the sclera for permanent support
Stabilizes conditions during cataract surgery
Improves IOL centration
Reduces risk of capsular fibrosis
Resists capsular shrinkage
MR-6D
Type 6DBox of 1, sterileDiameter: 9.5 mmLength: 9.61 mmMaterial: PMMA
MR-6E
Type 6EBox of 1, sterileDiameter: 10.0 mmLength: 10.14 mm
Both have the same arc of 120 degreesMaterial: PMMA
MORCHER® PUPIL DILATORThe pupil dilator type 5S is a semi-circular
elastic PMMA ring for the expansion of the
pupil during phacoemulsification. It is supplied
in sterile packaging for a single use.
The optimal temporary implant for use with
patients who have cataract and contracted pupils,
or floppy iris syndrome.
Pupil dilator may be inserted manually or with
the Geuder Injector G-32970.
Important Note: The pupil dilator should be
implanted only with viscoelastic for protection
of the corneal endothelium.
GEUDER® PUPIL DILATOR INJECTORThe Geuder Pupil Dilator Injector is designed
for the clockwise one-hand implantation of
the Morcher Pupil Dilator.
G-32970
Reusable Injector for the Pupil Dilator
MR-5S
Type 5SBox of 1, sterileOverall Length: 7.50 mm Pupil Size: 5.0–6.0 mmThickness: 0.15–0.60/0.90 m
Material: PMMA
TO PLACE AN ORDER
T: 800.932.4202 F: [email protected]
6 17
FCI-Ophthalmics.com
IRIS RETRACTORSTo stretch and stabilize the iris
during surgery
Blue polypropylene
CATARACT
RING CALIPERSTemporary template to create a more precise
anterior capsulorhexis
PEMA (Polyethelmethacrilate)
RC-5
5 mm inner diameterBox of 1, sterile
RC-6
6 mm inner diameterBox of 1, sterile
MACKOOL CATARACT SUPPORT SYSTEMDesigned by Richard J. Mackool, M.D.
To provide capsular support during cataract
surgery for patients with lax/absent zonules
Flexible/Disposable
Easy Insertion/Removal
MH-1005
NylonBox of 5, sterile
18 1
S9-5014
Disposable, 1 set of four
S9-5054
Disposable, 5 sets of 4
S9-5116
Reusable, 1 set of 6(Packaged in steam autoclavable container)
TO PLACE AN ORDER
T: 800.932.4202 F: [email protected]
8 19
THE KITARO DRY/WET LAB KITSThe KITARO© Dry/Wet Lab Kits are created with the learning surgeon in mind. With both wet and dry lab kits, the
beginner can practice techniques repeatedly without the added complication of long preparation times and costly live
tissue samples. These tools simulate the stages of cataract surgery using both a wet lab and dry lab environment to allow
new surgeons the ability to train repeatedly on basic surgical techniques.
Kitaro Dry/Wet Lab Kit
K-5000 KITARO Dry/Wet Lab Kit
Reusable Goods
K-1130 Cornea-iris Part for Dry Lab
K-1135 Sclera Part
K-1140 Mask for Dry/Wet Lab
K-1145 Base Plate
K-1150 Segmented Plastic Nuclei Artificial Lens (3 Types)
K-1155 Polymer-clay Nuclei in PC Cups
K-1160 Anterior Capsule Forceps
K-1165 Sclera Fixation Forceps
K-1170 U/S (I/A) Handpieces (for segmented plastic nucleus)
K-1175 U/S (I/A) Handpieces (for Polymer-Clay Nucleus)
K-1180 Spatula Hook
K-1185 Phaco Chopper
K-1190 Mr. Divider's Hook
K-1200 Cystotome (21G Needle) with Syringe
K-1205 Artificial Cortex, Resin Clay in Posterior Capsule Cups and Spare Clay
K-1210 Sclerocorneal Limbus
K-1215 CCC-Processed AC Film
K-1220 Container for Dry/Wet Lab
K-1225 Nucleus Manipulating Hook ( 2 Types of Ends)
K-1230 Cystotome (26G Needle) with Syringe
K-1235 Hydro Needle with Syringe
K-1240 Irrigation Bag
K-3010 KITARO DVD
Disposable Goods
K-1020 Precut Sclerocorneal Sheet + Limbus
K-1030 Anterior-capsule Film (11cm x 2.5m)
K-1040 Viscoelastic Substance (10cc)
K-2010 Artificial Cataract Lens Mixed (3 soft; 3 medium hard)
K-2020 Cornea-iris Part for Wet Lab
Optional
K-1195 Speculum
K-1250 Desk top magnifying glass w/operating board for Dry lab
K-1255 Drain Box for Wet Lab
K-1260 Soft nucleus
K-1265 Medium hard nucleus
K-1270 Very hard nucleus
K-3000 Text Book
TO PLACE AN ORDER
T: 800.932.4202 F: [email protected]
Kitaro Complex Lab 2
K-7000 KITARO Complex Lab 2
Disposable Goods for Complex Lab 2
K-7010 Cornea for ECCE
K-7020 Cornea for PCRM
K-6040 Sclerocorneal Sheet (30 pcs)
K-7030 Sclerocorneal Sheet for ECCE (6 pcs)
K-7040 Nucleus for ECCE (6 pcs)
K-7050 Nucleus for PCRM (6 pcs)
Reusable Goods for Complex Lab 2
K-7060 Base & Mask for ECCE & PCRM
K-7070 Sclera for ECCE (2 pcs)
K-7075 Sclera for PCRM
K-7105 IOL Foldable Forceps
K-7115 Westcott Tenotomy Scissors
K-7120 Irrigating Vectis
K-7125 Pushpull
K-7130 Symcoe Cannula
Optional Goods for Complex Lab 2
K-1255 Drain Box
20
KITARO CATARACT COMPLEX CASE LABSFor the advanced surgeon, Kitaro has developed two kits for complex surgical procedures. Like the Dry/Wet Lab Kit, the Complex
Labs allow for repeated practice of techniques and procedures with realistic but synthetic materials.
The Kitaro Complex Lab 1 allows a surgeon to practice such complex cases as small pupil management, weak or ruptured zonules,
and intraocular lens transcleral fixation. The surgeon may also elect practice phakic IOL insertion with an optional add-on part.
The Kitaro Complex Lab 2 allows a surgeon to practice conventional extracapsular extraction (ECCE) and posterior capsule rupture
management.
Kitaro Complex Lab 1
K-6000 KITARO Complex Lab 1
Disposable Goods for Complex Lab 1
K-6010 Cornea for Weak or Ruptured Zonules
K-6020 Cornea for IOL Transcleral Fixation
K-6030 Cornea for Small Pupil Management
K-6040 Sclerocorneal Sheet
K-6050 Mock Iris Retractors
K-6060 Artificial Nucleus for Weak Zonules
Reusable Goods for Complex Lab 1
K-1135 Sclera Part
K-1140 Mask
K-1145 Base Plate
K-6110 Capsular Tension Ring (2 pcs)
K-6145 Dry Nucleus (2 pcs)
K-1165 Sclera Fixation Forceps
K-6115 Tying Forceps
K-6120 Needle Holder
K-1160 Anterior Capsule Forceps
K-1230 Cystotome (26G Needle) with Syringe
K-6130 Chopper & Paddle Hook (double-ended)
K-6135 Sinsky Hook
K-6140 Spring Scissors
K-6105 IOL
Optional Goods for Complex Lab 1
K-6150 Cornea for Phakic IOL (2 pcs)
K-1255 Drain Box
800.932.4202
THE FCI STORYSince its inception in 1984, FCI has become a worldleader in products that solve problems in the areasof Dry Eye, Oculoplastics, Cataract and Retinal procedures. Through close collaboration with leading ophthalmic surgeons worldwide, FCI is continually developing and testing products thatcontribute to the quality of patients’ lives and products that respond to physicians’ needs with advanced materials and innovative research. FCI is excited about the future and is dedicated to theadvancement of quality in eye care. FCI conforms to the world’s standards for quality in design, manufacturing and service:
All FCI Ophthalmics products approved by FDA for commercial distribution
www.FCI-Ophthalmics.com
800.932.4202
CONTACT INFORMATIONShippingFCI Ophthalmics20 Winter StreetPembroke, MA 02359
MailingFCI OphthalmicsP.O. Box 465Marshfield Hills, MA 02051
Telephone800.932.4202781.826.9060
Fax781.826.9062
ORDERING INFORMATIONAll FCI products are completely LATEX-FREE.FCI products are sold worldwide through a network of independent Distributors/Reps. To place an order, and/or to identify your Distributor/Rep, call toll-free 800.932.4202.
Payment Terms30 days net
Shipping and InsurancePrepaid and added to invoice
ReturnsDefective merchandise, or merchandise shipped in error by FCI, may be returned for replacement or full credit within 30 days from date of invoice. Prior authorization must be obtained. Returned merchandise must be properly packaged to prevent damage during shipping. Returned merchandise must be in saleable condition (ie: not opened, crushed, marked or otherwise damaged). Restocking charge may apply. No returns allowed after 60 days from date of purchase.
GuaranteeFCI products are unconditionally guaranteed against manufacturing defects. Any product found to have a manufacturing defect will be replaced free of charge.
NOV2012
FCI Ophthalmics
VitreoretinalProduct Catalog
www.FCI-Ophthalmics.com
800.932.4202
www.FCI-Ophthalmics.com
Since its inception in 1984, FCI has become a world leader in products that
solve problems in the areas of Dry Eye, Oculoplastics, Cataract and Retinal
procedures. Through close collaboration with leading ophthalmic surgeons
worldwide, FCI is continually developing and testing products that contribute
to the quality of patients’ lives and products that respond to surgeons’ needs
with advanced materials and innovative research.
FCI performs extensive research and development to provide surgeons with
outstanding products that enhance the efficiency and effectiveness of
vitreoretinal procedures.
The new line of disposable devices is FCI’s latest commitment to providing
surgeons with high performance products for vitreoretinal procedures.
1
LASER PROBES 2
LASER ILLUMINATION PROBES 4
FIBER OPTIC PROBES 11
IRIS RETRACTORS 13
BACKFLUSH & RESERVOIRS 14
CANNULAS 15
BUCKLES & VITRECTOMY LENSES 16
INSTRUMENTS 18
CLEANING & MAINTENANCE 20
TABLE OF CONTENTS
2
LASER PROBES
LASER PROBES Straight, Curved and Angled at 30˚
Ergonomic non-slip handpiece design
Convenient 2.4 meters long fibers
Single use / Box of 10
Straight
Curved
Angled 30̊
IRIDEXS9-10-H0-01-20 Straight 20 GaS9-11-H0-01-20 Angled 20 GaS9-12-H0-01-20 Curved 20 Ga
S9-10-H0-01-23 Straight 23 GaS9-11-H0-01-23 Angled 23 Ga
S9-10-H0-01-25 Straight 25 GaS9-11-H0-01-25 Angled 25 GaS9-12-H0-01-25 Curved 25 Ga
ALCON/COHERENT/ZEISS/ELLEXS9-10-G0-01-20 Straight 20 GaS9-11-G0-01-20 Angled 20 GaS9-12-G0-01-20 Curved 20 Ga
S9-10-G0-01-23 Straight 23 GaS9-11-G0-01-23 Angled 23 Ga
S9-10-G0-01-25 Straight 25 GaS9-11-G0-01-25 Angled 25 GaS9-12-G0-01-25 Curved 25 Ga
3
HGMS9-10-D0-01-20 Straight 20 GaS9-11-D0-01-20 Angled 20 GaS9-12-D0-01-20 Curved 20 Ga
S9-10-D0-01-23 Straight 23 GaS9-11-D0-01-23 Angled 23 Ga
S9-10-D0-01-25 Straight 25 GaS9-11-D0-01-25 Angled 25 GaS9-12-D0-01-25 Curved 25 Ga
NIDEK PUSH INS9-10-E0-01-20 Straight 20 GaS9-11-E0-01-20 Angled 20 GaS9-12-E0-01-20 Curved 20 Ga
S9-10-E0-01-23 Straight 23 GaS9-11-E0-01-23 Angled 23 Ga
S9-10-E0-01-25 Straight 25 GaS9-11-E0-01-25 Angled 25 GaS9-12-E0-01-25 Curved 25 Ga
NIDEK THREADS9-10-B0-01-20 Straight 20 GaS9-11-B0-01-20 Angled 20 GaS9-12-B0-01-20 Curved 20 Ga
S9-10-B0-01-23 Straight 23 GaS9-11-B0-01-23 Angled 23 Ga
S9-10-B0-01-25 Straight 25 GaS9-11-B0-01-25 Angled 25 GaS9-12-B0-01-25 Curved 25 Ga
QUANTEL SUPRA/VITRAS9-10-I0-01-20 Straight 20 GaS9-11-I0-01-20 Angled 20 GaS9-12-I0-01-20 Curved 20 Ga
S9-10-I0-01-23 Straight 23 GaS9-11-I0-01-23 Angled 23 Ga
S9-10-I0-01-25 Straight 25 GaS9-11-I0-01-25 Angled 25 GaS9-12-I0-01-25 Curved 25 Ga
LASER PROBES
TO PLACE AN ORDERT: 800.932.4202 F: 781.826.9062
4
LASER ILLUMINATION PROBES
LASER ILLUMINATION PROBES Ergonomic non-slip handpiece design
Convenient 2.4 meters long fibers
Single use / Box of 10
Straight
Straight, Extended
Angled 30,̊ Extended
Curved
Angled 30̊
EXTENDED LASER ILLUMINATION PROBES 2.5 mm laser extension
Enables a wider illumination field while using the laser
TO PLACE AN ORDERT: 800.932.4202 F: 781.826.9062
5
LASER ILLUMINATION PROBES FORALCON, COHERENT, ZEISS, ELLEX
UNIVERSAL 19GAS9-14-GA-01-20 Straight 20 GaS9-14-GA-02-20 Straight, extended 20 GaS9-15-GA-01-20 Angled 20 GaS9-15-GA-02-20 Angled, extended 20 GaS9-16-GA-01-20 Curved 20 Ga
S9-14-GA-01-23 Straight 23 GaS9-15-GA-01-23 Angled 23 Ga
S9-14-GA-01-25 Straight 25 GaS9-16-GA-01-25 Curved 25 Ga
ALCON ACCURUSS9-14-GB-01-20 Straight 20 GaS9-14-GB-02-20 Straight, extended 20 GaS9-15-GB-01-20 Angled 20 GaS9-15-GB-02-20 Angled, extended 20 GaS9-16-GB-01-20 Curved 20 Ga
S9-14-GB-01-23 Straight 23 GaS9-15-GB-01-23 Angled 23 Ga
S9-14-GB-01-25 Straight 25 GaS9-16-GB-01-25 Curved 25 Ga
ALCON OCUTOMES9-14-GC-01-20 Straight 20 GaS9-14-GC-02-20 Straight, extended 20 GaS9-15-GC-01-20 Angled 20 GaS9-15-GC-02-20 Angled, extended 20 GaS9-16-GC-01-20 Curved 20 Ga
S9-14-GC-01-23 Straight 23 GaS9-15-GC-01-23 Angled 23 Ga
S9-14-GC-01-25 Straight 25 GaS9-16-GC-01-25 Curved 25 Ga
STORZ – BAUSCH & LOMB MILLENNIUMS9-14-GD-01-20 Straight 20 GaS9-14-GD-02-20 Straight, extended 20 GaS9-15-GD-01-20 Angled 20 GaS9-15-GD-02-20 Angled, extended 20 GaS9-16-GD-01-20 Curved 20 Ga
S9-14-GD-01-23 Straight 23 GaS9-15-GD-01-23 Angled 23 Ga
S9-14-GD-01-25 Straight 25 GaS9-16-GD-01-25 Curved 25 Ga
6
LASER ILLUMINATION PROBES
LASER ILLUMINATION PROBES FORHGM
UNIVERSAL 19GAS9-14-DA-01-20 Straight 20 GaS9-14-DA-02-20 Straight, extended 20 GaS9-15-DA-01-20 Angled 20 GaS9-15-DA-02-20 Angled, extended 20 GaS9-16-DA-01-20 Curved 20 Ga
S9-14-DA-01-23 Straight 23 GaS9-15-DA-01-23 Angled 23 Ga
S9-14-DA-01-25 Straight 25 GaS9-16-DA-01-25 Curved 25 Ga
ALCON ACCURUSS9-14-DB-01-20 Straight 20 GaS9-14-DB-02-20 Straight, extended 20 GaS9-15-DB-01-20 Angled 20 GaS9-15-DB-02-20 Angled, extended 20 GaS9-16-DB-01-20 Curved 20 Ga
S9-14-DB-01-23 Straight 23 GaS9-15-DB-01-23 Angled 23 Ga
S9-14-DB-01-25 Straight 25 GaS9-16-DB-01-25 Curved 25 Ga
ALCON OCUTOMES9-14-DC-01-20 Straight 20 GaS9-14-DC-02-20 Straight, extended 20 GaS9-15-DC-01-20 Angled 20 GaS9-15-DC-02-20 Angled, extended 20 GaS9-16-DC-01-20 Curved 20 Ga
S9-14-DC-01-23 Straight 23 GaS9-15-DC-01-23 Angled 23 Ga
S9-14-DC-01-25 Straight 25 GaS9-16-DC-01-25 Curved 25 Ga
STORZ – BAUSCH & LOMB MILLENNIUMS9-14-DD-01-20 Straight 20 GaS9-14-DD-02-20 Straight, extended 20 GaS9-15-DD-01-20 Angled 20 GaS9-15-DD-02-20 Angled, extended 20 GaS9-16-DD-01-20 Curved 20 Ga
S9-14-DD-01-23 Straight 23 GaS9-15-DD-01-23 Angled 23 Ga
S9-14-DD-01-25 Straight 25 GaS9-16-DD-01-25 Curved 25 Ga
TO PLACE AN ORDERT: 800.932.4202 F: 781.826.9062
7
UNIVERSAL 19GAS9-14-HA-01-20 Straight 20 GaS9-14-HA-02-20 Straight, extended 20 GaS9-15-HA-01-20 Angled 20 GaS9-15-HA-02-20 Angled, extended 20 GaS9-16-HA-01-20 Curved 20 Ga
S9-14-HA-01-23 Straight 23 GaS9-15-HA-01-23 Angled 23 Ga
S9-14-HA-01-25 Straight 25 GaS9-16-HA-01-25 Curved 25 Ga
ALCON ACCURUSS9-14-HB-01-20 Straight 20 GaS9-14-HB-02-20 Straight, extended 20 GaS9-15-HB-01-20 Angled 20 GaS9-15-HB-02-20 Angled, extended 20 GaS9-16-HB-01-20 Curved 20 Ga
S9-14-HB-01-23 Straight 23 GaS9-15-HB-01-23 Angled 23 Ga
S9-14-HB-01-25 Straight 25 GaS9-16-HB-01-25 Curved 25 Ga
ALCON OCUTOMES9-14-HC-01-20 Straight 20 GaS9-14-HC-02-20 Straight, extended 20 GaS9-15-HC-01-20 Angled 20 GaS9-15-HC-02-20 Angled, extended 20 GaS9-16-HC-01-20 Curved 20 Ga
S9-14-HC-01-23 Straight 23 GaS9-15-HC-01-23 Angled 23 Ga
S9-14-HC-01-25 Straight 25 GaS9-16-HC-01-25 Curved 25 Ga
STORZ – BAUSCH & LOMB MILLENNIUMS9-14-HD-01-20 Straight 20 GaS9-14-HD-02-20 Straight, extended 20 GaS9-15-HD-01-20 Angled 20 GaS9-15-HD-02-20 Angled, extended 20 GaS9-16-HD-01-20 Curved 20 Ga
S9-14-HD-01-23 Straight 23 GaS9-15-HD-01-23 Angled 23 Ga
S9-14-HD-01-25 Straight 25 GaS9-16-HD-01-25 Curved 25 Ga
LASER ILLUMINATION PROBES FORIRIDEX
8
LASER ILLUMINATION PROBES
LASER ILLUMINATION PROBES FORNIDEK THREAD
UNIVERSAL 19GAS9-14-BA-01-20 Straight 20 GaS9-14-BA-02-20 Straight, extended 20 GaS9-15-BA-01-20 Angled 20 GaS9-15-BA-02-20 Angled, extended 20 GaS9-16-BA-01-20 Curved 20 Ga
S9-14-BA-01-23 Straight 23 GaS9-15-BA-01-23 Angled 23 Ga
S9-14-BA-01-25 Straight 25 GaS9-16-BA-01-25 Curved 25 Ga
ALCON ACCURUSS9-14-BB-01-20 Straight 20 GaS9-14-BB-02-20 Straight, extended 20 GaS9-15-BB-01-20 Angled 20 GaS9-15-BB-02-20 Angled, extended 20 GaS9-16-BB-01-20 Curved 20 Ga
S9-14-BB-01-23 Straight 23 GaS9-15-BB-01-23 Angled 23 Ga
S9-14-BB-01-25 Straight 25 GaS9-16-BB-01-25 Curved 25 Ga
ALCON OCUTOMES9-14-BC-01-20 Straight 20 GaS9-14-BC-02-20 Straight, extended 20 GaS9-15-BC-01-20 Angled 20 GaS9-15-BC-02-20 Angled, extended 20 GaS9-16-BC-01-20 Curved 20 Ga
S9-14-BC-01-23 Straight 23 GaS9-15-BC-01-23 Angled 23 Ga
S9-14-BC-01-25 Straight 25 GaS9-16-BC-01-25 Curved 25 Ga
STORZ – BAUSCH & LOMB MILLENNIUMS9-14-BD-01-20 Straight 20 GaS9-14-BD-02-20 Straight, extended 20 GaS9-15-BD-01-20 Angled 20 GaS9-15-BD-02-20 Angled, extended 20 GaS9-16-BD-01-20 Curved 20 Ga
S9-14-BD-01-23 Straight 23 GaS9-15-BD-01-23 Angled 23 Ga
S9-14-BD-01-25 Straight 25 GaS9-16-BD-01-25 Curved 25 Ga
TO PLACE AN ORDERT: 800.932.4202 F: 781.826.9062
9
LASER ILLUMINATION PROBES FORNIDEK PUSH IN
UNIVERSAL 19GAS9-14-EA-01-20 Straight 20 GaS9-14-EA-02-20 Straight, extended 20 GaS9-15-EA-01-20 Angled 20 GaS9-15-EA-02-20 Angled, extended 20 GaS9-16-EA-01-20 Curved 20 Ga
S9-14-EA-01-23 Straight 23 GaS9-15-EA-01-23 Angled 23 Ga
S9-14-EA-01-25 Straight 25 GaS9-16-EA-01-25 Curved 25 Ga
ALCON ACCURUSS9-14-EB-01-20 Straight 20 GaS9-14-EB-02-20 Straight, extended 20 GaS9-15-EB-01-20 Angled 20 GaS9-15-EB-02-20 Angled, extended 20 GaS9-16-EB-01-20 Curved 20 Ga
S9-14-EB-01-23 Straight 23 GaS9-15-EB-01-23 Angled 23 Ga
S9-14-EB-01-25 Straight 25 GaS9-16-EB-01-25 Curved 25 Ga
ALCON OCUTOMES9-14-EC-01-20 Straight 20 GaS9-14-EC-02-20 Straight, extended 20 GaS9-15-EC-01-20 Angled 20 GaS9-15-EC-02-20 Angled, extended 20 GaS9-16-EC-01-20 Curved 20 Ga
S9-14-EC-01-23 Straight 23 GaS9-15-EC-01-23 Angled 23 Ga
S9-14-EC-01-25 Straight 25 GaS9-16-EC-01-25 Curved 25 Ga
STORZ – BAUSCH & LOMB MILLENNIUMS9-14-ED-01-20 Straight 20 GaS9-14-ED-02-20 Straight, extended 20 GaS9-15-ED-01-20 Angled 20 GaS9-15-ED-02-20 Angled, extended 20 GaS9-16-ED-01-20 Curved 20 Ga
S9-14-ED-01-23 Straight 23 GaS9-15-ED-01-23 Angled 23 Ga
S9-14-ED-01-25 Straight 25 GaS9-16-ED-01-25 Curved 25 Ga
10
LASER ILLUMINATION PROBES
LASER ILLUMINATION PROBES FORQUANTEL SUPRA/VITRA
UNIVERSAL 19GAS9-14-IA-01-20 Straight 20 GaS9-14-IA-02-20 Straight, extended 20 GaS9-15-IA-01-20 Angled 20 GaS9-15-IA-02-20 Angled, extended 20 GaS9-16-IA-01-20 Curved 20 Ga
S9-14-IA-01-23 Straight 23 GaS9-15-IA-01-23 Angled 23 Ga
S9-14-IA-01-25 Straight 25 GaS9-16-IA-01-25 Curved 25 Ga
ALCON ACCURUSS9-14-IB-01-20 Straight 20 GaS9-14-IB-02-20 Straight, extended 20 GaS9-15-IB-01-20 Angled 20 GaS9-15-IB-02-20 Angled, extended 20 GaS9-16-IB-01-20 Curved 20 Ga
S9-14-IB-01-23 Straight 23 GaS9-15-IB-01-23 Angled 23 Ga
S9-14-IB-01-25 Straight 25 GaS9-16-IB-01-25 Curved 25 Ga
ALCON OCUTOMES9-14-IC-01-20 Straight 20 GaS9-14-IC-02-20 Straight, extended 20 GaS9-15-IC-01-20 Angled 20 GaS9-15-IC-02-20 Angled, extended 20 GaS9-16-IC-01-20 Curved 20 Ga
S9-14-IC-01-23 Straight 23 GaS9-15-IC-01-23 Angled 23 Ga
S9-14-IC-01-25 Straight 25 GaS9-16-IC-01-25 Curved 25 Ga
STORZ – BAUSCH & LOMB MILLENNIUMS9-14-ID-01-20 Straight 20 GaS9-14-ID-02-20 Straight, extended 20 GaS9-15-ID-01-20 Angled 20 GaS9-15-ID-02-20 Angled, extended 20 GaS9-16-ID-01-20 Curved 20 Ga
S9-14-ID-01-23 Straight 23 GaS9-15-ID-01-23 Angled 23 Ga
S9-14-ID-01-25 Straight 25 GaS9-16-ID-01-25 Curved 25 Ga
TO PLACE AN ORDERT: 800.932.4202 F: 781.826.9062
11
FIBER OPTIC PROBES
FOCUS
62°
A = 12.5 mm(at 10 mm Distance)Angle = 62°
CHANDELIER
WIDE ANGLE
A = 9 mmB = 46 mm(at 10 mm Distance)Angle = 134°
134°
B
A
A
FIBER OPTIC PROBES Ergonomic non-slip handpiece design
Convenient 2.4 meters long fibers
Single use / Box of 5
Available in 20 Ga, 23 Ga and 25 Ga
SHIELDED
102°
A = 9 mmB = 25 mm(at 10 mm Distance)Angle = 102°
A
B
12
FIBER OPTIC PROBES
ALCON OCUTOMES9-20-0C-20 Focus 20 GaS9-21-0C-20 Wide angle 20 GaS9-22-0C-20 Shielded 20 Ga
S9-20-0C-23 Focus 23 GaS9-21-0C-23 Wide angle 23 GaS9-22-0C-23 Shielded 23 Ga
S9-20-0C-25 Focus 25 GaS9-23-0C-25 Chandelier 25 Ga
STORZ – BAUSCH & LOMB MILLENNIUMS9-20-0B-20 Focus 20 GaS9-21-0B-20 Wide angle 20 Ga
S9-20-0B-23 Focus 23 GaS9-21-0B-23 Wide angle 23 Ga
S9-20-0B-25 Focus 25 Ga
FIBER OPTIC PROBES
ALCON ACCURUSS9-20-0A-20 Focus 20 GaS9-21-0A-20 Wide angle 20 Ga
S9-20-0A-23 Focus 23 GaS9-21-0A-23 Wide angle 23 Ga
S9-20-0A-25 Focus 25 Ga
TO PLACE AN ORDERT: 800.932.4202 F: 781.826.9062
13
IRIS RETRACTORS
REUSABLE IRIS RETRACTORS Same characteristics as single use hooks
Supplied inside autoclavable container
Sterile
Reusable
S9-5116 1 set of 6
SINGLE USE IRIS RETRACTORS Polypropylene iris retractors
Sterile
Insertion through 0.5 mm incision
Adjustable silicone ring
Disposable
S9-5014 1 set of 4S9-5054 5 sets of 4
14
BACKFLUSH & RESERVOIRS
SINGLE USE BACKFLUSHPASSIVE & ACTIVE ASPIRATION
Sterile
Lightweight aluminum handle
S9-3020 Passive Box of 5
S9-3010 Active Box of 5
REUSABLE BACKFLUSHPASSIVE & ACTIVE ASPIRATION
Non sterile
Durable titanium handle
Reusable
S9-3120 Passive Box of 1
S9-3110 Active Box of 1
REPLACEMENT RESERVOIRS FOR BACKFLUSHS9-3220 Passive Box of 10
S9-3210 Active Box of 10
Passive
Active
Passive
Active
Passive
Active
TO PLACE AN ORDERT: 800.932.4202 F: 781.826.9062
15
CANNULAS
DISPOSABLE CANNULAS Available in 20 Ga, 23 Ga and 25 Ga
5 per Box
S9-4010-20 Brush Tip 0.9 mm 20 GaS9-4020-20 Soft Tip 2 mm 20 GaS9-4040-20 Charles Flute 20 Ga
S9-4010-23 Brush Tip 0.9 mm 23 GaS9-4020-23 Soft Tip 2 mm 23 GaS9-4040-23 Charles Flute 23 Ga
S9-4010-25 Brush Tip 0.6 mm 25 GaS9-4020-25 Soft Tip 2 mm 25 GaS9-4040-25 Charles Flute 25 Ga
PFCL CANNULAS Available in 20 Ga and 23 Ga
5 per Box
S9-4050-20 Dual Bore PFCL 20 Ga
S9-4050-23 Dual Bore PFCL 23 Ga
SUB-RETINAL CANNULA Available in 20 Ga
1 per Box
S9-4060-20 Dual Bore BSS Injection Needle 20 Ga 0.1 mm 41 Ga tip
SELF-RETAINING SILICONE OIL CANNULAS Available in 20 Ga and 23 Ga
5 per Box
S5-7704 4 mm 20 GaS5-7706 6 mm 20 Ga
S5-7705 4 mm 23 GaS5-7708 6 mm 23 Ga
Brush Tip (Silicone)
Soft Tip (Silicone)
Blunt Tip (Charles Flute)
4 mm6 mm
16
BUCKLES & VITRECTOMY LENSES
SCLERAL BUCKLING COMPONENTSScleral buckling is an effective means of closing breaks, bringing two layers of the retina back together, and ridding the eye of fluid under theretina. During the scleral buckling procedure, the buckle is sewn to the outer layer of the eye, keeping it securely in place. The buckle is usuallypermanently attached. This pushes — or “buckles” — the sclera toward the middle of the eye, which relieves the traction on the retina and allows the retinal tear to settle and re-heal against the wall of the eye.
S5-3025uFIXATION SLEEVE (Type 72) for S5-1025Box of 5, sterile
S5-3100uWATZKE FORCEPS To fix sleeves onto bandsBox of 1, non-sterile
SUB 100 SERIES TYPES5-1005uBAND (Type 40), Box of 5, sterile
S5-1015uBAND (Type 41), Box of 5, sterile
S5-1025uBAND (Type 42), Box of 5, sterile
SLEEVESS5-3005uFIXATION SLEEVE (Type 70) for S5-1005Box of 5, sterile
S5-3510uFIXATION SLEEVE (Type 270) for S5-2005Box of 5, sterile
S5-3515uFIXATION SLEEVE (Type 71) for S5-1015Box of 5, sterile
200 SERIES TYPES5-2005uBAND (Type 240), Box of 5, sterile
S5-2105uSTRIP (Type 219), Box of 5, sterile
S5-2205uSTRIP (Type 220), Box of 5, sterile
S5-2255uSTRIP (Type 225), Box of 5, sterile
S5-2295uASYMMETRICAL TIRE 9 (Type 276) Box of 5, sterile
S5-2305uTIRE 9 (Type 277), Box of 5, sterile
S5-2315uBICONVEX TIRE 9 (Type 287), Box of 5, sterile
S5-2325uBICONVEX TIRE 12 (Type 289), Box of 5, sterile
S5-2335uTIRE 11 (Type 279), Box of 5, sterile
S5-2345uASYMMETRICAL TIRE 12 (Type 280), Box of 5, sterile
S5-1105uSTRIP (Type 20), Box of 5, sterile
S5-1205uSTRIP (Type 31), Box of 5, sterile
S5-1255uSTRIP (Type 32), Box of 5, sterile
S5-1305uTIRE 12 (Type 78G), Box of 5, sterile
TO PLACE AN ORDERT: 800.932.4202 F: 781.826.9062
17
INVITRIA® – INTRAVITREAL INJECTION ASSISTANTDesigned by Arnaldo Goncalves, M.D.
A disposable device that simplifies intravitreal injections by making the procedure faster and more predictable. The unique device is equipped with a side port specifically designed to ensure a fixed injection angle, position, and depth.
Material: Makrolon 2458 Fixed 28° angle Fixed 5.60 mm depth Fixed 3.5 mm distance from the limbus Position line for proper orientation on the limbus Ergonomic grip Flange for optimal positioning and control
500 SERIES SPONGE TYPE
DISPOSABLE VITRECTOMY LENSESS5-7010u Planoconcave Lens, Silicone, Box of 5, sterile
S5-8010u Planoconcave Lens, PMMA, Box of 5, sterile
S5-7030u 30° Prismatic Lens, Silicone, Box of 5, sterile
S5-8030u 35° Prismatic Lens, PMMA, Box of 5, sterile
S5-7040u Biconcave Lens, Silicone, Box of 5, sterile
S5-8040u Biconcave Lens, PMMA, Box of 5, sterile
MW-200 Intravitreal Injection AssistantBox of 25, sterile
S5-6503u3 mm SPONGE (Type 503), Box of 5, sterile
S5-6504u4 mm SPONGE (Type 504), Box of 5, sterile
S5-6505u5 mm SPONGE (Type 505), Box of 5, sterile
S5-6520u5 mm GROOVED SPONGE (Type 505 G)Box of 5, sterile
S5-6535u3 x 5 SPONGE (TYPE 506), Box of 5, sterile
S5-6540u3 x 5 Grooved SPONGE (Type 506 G)Box of 5, sterile
S5-6557u5-5 x 7-5 SPONGE (Type 507), Box of 5, sterile
S5-6560u5-5 x 7-5 GROOVED SPONGE (Type 507 G)Box of 5, sterile
S5-6570u7-5 x 3-5 GROOVED SPONGE (TYPE 509 G)Box of 5, sterile
S5-6550u2-5 x 5 HALF-SPONGE (Type 510), Box of 5, sterile
S5-6575u2-5 x 7-5 HALF-SPONGE (Type 511)Box of 5, sterile
S5-6585u3-25 x 7-0 Sponge (Type 907), Box of 5, sterile
18
INSTRUMENTS
SCISSORSA9-61-20-20 Straight Vitreoretinal with Rounded Blades 20 GaA9-61-21-20 Curved Vitreoretinal 20 GaA9-61-24-20 Angled 45° Horizontal Vitreoretinal 20 GaA9-61-26-20 Angled 55° Horizontal Vitreoretinal 1.7 mm Blades 20 GaA9-61-27-20 Angled 70° Vertical Vitreoretinal 20 GaA9-61-29-20 Claus Lucke Horizontal 20 Ga Retinotomy
A9-61-21-23 Curved Vitreoretinal 23 GaA9-61-27-23 Angled 70° Vertical Vitreoretinal 23 Ga
A9-61-21-25 Curved Vitreoretinal 25 GaA9-61-28-25 Angled 45° Vertical Vitreoretinal 25 GaA9-61-03 Flushing Adapter
VITREORETINAL HANDLESHANDLE FEATURES
Made of lightweight and durable titanium
Choice of one or two finger actuation
Linear actuation for smooth closure
EXCHANGEABLE TIP FEATURES
Available in 20 Ga, 23 Ga and 25 Ga
Color coding for easy identification
360° rotating wheel for optimum control
Supplied with a flushing adapter
A9-61-01 One Finger Control, TitaniumA9-61-02 Two Finger Control, Titanium
One Finger Control Handle
Two Finger Control Handle
A9-61-20
A9-61-21
A9-61-24
A9-61-26
A9-61-27
A9-61-29Flushing Adapter
TO PLACE AN ORDERT: 800.932.4202 F: 781.826.9062
19
FORCEPSA9-61-18-17 Foreign Body 17 GaA9-61-03-20 Diamonized End-Gripping Vitreoretinal 20 GaA9-61-04.20 Tano Asymmetrical End-Gripping 20 GaA9-61-05-20 Pick Vitreoretinal 20 GaA9-61-07-20 Vitreoretinal End-Gripping 20 Ga with Serrated Jaws A9-61-08-20 Eckardt End-Gripping 20 GaA9-61-09-20 ILM Vitreoretinal End-Gripping 20 GaA9-61-16-20 Angled Horizontal Diamonized Gripping 20 GaA9-61-17-20 Angled Horizontal Subretinal Gripping 20 Ga 3 mm Tip
A9-61-03-23 Diamonized End-Gripping Vitreoretinal 23 GaA9-61-04-23 Tano Asymmetrical End-Gripping 23 GaA9-61-05-23 Pick Vitreoretinal 23 GaA9-61-08-23 Eckardt End-Gripping 23 GaA9-61-09-23 ILM Vitreoretinal End-Gripping 23 Ga
A9-61-03-25 Diamonized End-Gripping Vitreoretinal 25 GaA9-61-04-25 Tano Asymmetrical End-Gripping 25 GaA9-61-05-25 Pick Vitreoretinal 25 GaA9-61-08-25 Eckardt End-Gripping 25 Ga
A9-61-03
A9-61-04
A9-61-05
A9-61-07
A9-61-08
A9-61-09
A9-61-16
A9-61-17
MEMBRANE PICKA9-61-43-23 Membrane Pick 23 Ga
A9-61-43-25 Membrane Pick 25 Ga
FCI surgical instruments are shipped non-sterile. THEY MUST BE DECONTAMINATED, CLEANED AND STERILIZED BEFORE EACH USE. Our recommendations for the cleaning of our stainless steel and titanium surgical are as follows:
Rinsing:Remove blood and tissue immediately after use by rinsing with demineralized or distilled water.
Decontamination:Immerse the instrument in the decontaminating solution and follow the manufacturer’s instruction. Avoid the use of chlorine that may corrode the stainless steel instruments.
Chemical inactivation of non conventional transmittable agents:We recommend that the instruments are soaked in a 1N sodium hydroxide solution prepared with demineralized or distilled water for 60 minutes at 20°C / 66°F. This inactivation should be followed by a very careful soaking, until the pHvalue is neutral. The presence of residual sodium hydroxide on the instruments may cause corrosion during the sterilization.The presence of chlorine in tap water makes the sodium hydroxide solution corrosive, and therefore it is necessary to usedemineralized or distilled water. Rinse the instrument carefully with demineralized water.
Cleaning:Clean the instrument following one of these processes:
Mild soap solution and soft bristled toothbrush
Ultrasonic procedure for at least 5 minutes
Using a washing machine
Dry instruments quickly and completely
Sterilization (physical inactivation of non conventional transmittable agents):Steam sterilization following a validated cycle according to your institution’s standards (recommended parameters are: 18 minutes at 134°C / 293°F, at 2 bars). Take care to use an adapted sterilization box.
Practical Advice: Treat the instruments made from different metals separately
Do not mix instruments in good condition with instruments that are corroded or damaged
Check the function and the cleanliness of each instrument after cleaning
CLEANING & MAINTENANCE
20
800.932.4202
www.FCI-Ophthalmics.com
CONTACT INFORMATIONShippingFCI Ophthalmics20 Winter StreetPembroke, MA 02359
MailingFCI OphthalmicsP.O. Box 465Marshfield Hills, MA 02051
Telephone800.932.4202781.826.9060
Fax781.826.9062
ORDERING INFORMATIONAll FCI products are completely LATEX-FREE.FCI products are sold worldwide through a network of independent Distributors/Reps. To place an order, and/or to identify your Distributor/Rep, call toll-free 800.932.4202.
Payment Terms30 days net
Shipping and InsurancePrepaid and added to invoice
ReturnsDefective merchandise, or merchandise shipped in error by FCI, may be returned for replacement or full credit within 30 days from date of invoice. Prior authorization must be obtained. Returned merchandise must be properly packaged to prevent damage during shipping. Returned merchandise must be in saleable condition (ie: not opened, crushed, markedor otherwise damaged). Restocking charge may apply. No returns allowed after 60 days from date of purchase.
GuaranteeFCI products are unconditionally guaranteed against manufacturing defects. Any product found to have a manufacturing defect will be replaced free of charge.
NOV2012