features and benefits - mepac cz · 2016-01-11 · pulse emergy (max.) 1000 μj 1000 μj 1000 μj...
TRANSCRIPT
Features and benefits:
Laser engraving mobile systém for engraving of big moulds
Replaces CNC EDM and micro-milling
New way of laser head clamping
New Motor travel X,Y,Z
Remote control of system HCP20
More mobile and smaller metal box
Easy of use with LIGHTER software
Inprovement of HCP20 in comparison with HCP10:
New way of laser head clamping to optimise its rotating to work position .
Improved focusing of laser head on the working area by using two red points.
Ethernet connection with superior PC (notebook is advantage) allows to prepare data far from
laser (without laser) or to use remote control of system HCP20.
Optimalization of working box designed for storing of the whole laser system. The box is smaller,
more mobile and also adapted for loading to car and moving in a hall. It is equipped with rotary
drum for careful placing of laser head and optical cable.
Manual travel X, Y, Z for quick setting of laser head working position.
Motor travel X,Y,Z for very precise moving of laser head to work position. KEY button on the
control board allows to lock the axis in the chosen place without any aberration.
Block of power supply of clamping magnet is newly equipped except UPS function also with
acoustic alarm for line voltage fault.
- HCP20 meets the hardest demands for mobile, quick and precise engraving of the large tools
and molds.
- Frequent moving and visiting our customers is now without any problem and risk.
HCP 20 - specification
HCP 20 - 20W HCP 20 - 30W HCP 20 - 50W
Nominal power 20 W 30W 50W
Pulse emergy (max.) 1000 μJ 1000 μJ 1000 μJ
Peak power (max.) 10 kW 10 kW 12 kW
Max. power 300W 300W 300W
Input voltage 100 do 240V 100 do 240V 100 do 240V
Imput current 3 do 1,25A max 3 do 1,25A max 3 do 1,4A max
Head cable lenght 3 m standard 3 m standard 3 m standard
Laser source Fiber laser Fiber laser Fiber laser
Emission of radiation Pulsed Pulsed Pulsed
Wavelength 1060-1080 nm 1060-1080 nm 1060-1080 nm
Modulation 20 kHz ÷ 100 kHz 30 kHz ÷ 100 kHz 50 kHz ÷ 100 kHz
Aiming Beam 1 mW @ 635 nm 5 mW @ 635 nm 5 mW @ 635 nm
Temperature range - operative Temperature range - storing
5°C do 50°C -10°C do 60°C
5°C do 40°C -10C do 60°C
10°C do 35°C -10C do 60°C
Cooling Forsed Air Forsed Air Forsed Air
Marking speed Up to 2000mm/sec Up to 2000mm/sec Up to 2000mm/sec
Objective F-Theta mm 63S 100S 160S 254S 100L 160L 254L 330L Working distance mm 72 113 177 280 97 175 297 387 Working area (mm x mm)
35x35 50x50 100x100 140x140 60x60 110x110 180x180 220x220
HCP20 complies with the strictest requirements and criteria for mobile, fast and precise work
for large engraving tools and molds. Frequent moving or commuting with laser engraving
system to the customer is now without problems and risks.
Examples of use: Engraving grid in aluminum
Engraving directional light
Engraving homologation describe of light in car
Engraving of mould
Features and benefits:
Ultra compact laser head
Low power consumption
High quality marking and precision
New portable and storable device in elegant box
Easy of use with LIGHTER software
Built-in encoder for smooth engraving
Manual feed
HCP 10 is the ultra compact pulsed fiber laser offering first class performance and advanced
software features. Thanks to state-of- the-art technology HCP 10 allows fast marking on metal and plastic material increasing systems productivity typical for automotive and electronics industry. Ultra compact dimension allows ease mechanical installations in the production line or inside a machines where limited space is always a key issue. With the smallest scanning head of the market place (112x298x90 mm), HCP 10 drastically simplifies systém design and machine integration. Available with 10W and 20W laser power emission, HCP 10 is very simple to set up and to parameterise using Lighter software suite. Thanks to Lighter ease of use HMI, operator can design any kind of label, with logo, text, datamatrix, bar codes. HCP 10 implements Embedded Marking Controller (EMC) for complete system control in “Stand Alone Mode” or “Master –Slave Mode”. HCP 10 is equipped with up to 4indipendent axys controls ( X,Y,Z, rotative axys) to implement Multi- Layers and Rotating Marking and to change marking head position.Dedicated encoder input is applied for Marking On Fly even in accelerated and un-costant speed conditions. Low Power consumption and excellent power efficiency are classified at top in its category.
Elegant and compact portable box
HCP Fiber Laser System in the portable box is
equipped with all the necessary components to
get to any place quickly. Simple and quick installation
allows to mark light and small parts on the table
of the box.We mark big pressing moulds by strong
electromagnet that is fixed to a mould and positioning
system.
HCP 10 - specification
HCP 10 - 20W HCP 10 - 30W HCP 10 - 50W
Nominal power 20 W 30W 50W
Pulse emergy (max.) 1000 μJ 1000 μJ 1000 μJ
Peak power (max.) 10 kW 10 kW 12 kW
Max. power 300W 300W 300W
Input voltage 100 do 240V 100 do 240V 100 do 240V
Imput current 3 do 1,25A max 3 do 1,25A max 3 do 1,4A max
Head cable lenght 3 m standard 3 m standard 3 m standard
Laser source Fiber laser Fiber laser Fiber laser
Emission of radiation Pulsed Pulsed Pulsed
Wavelength 1060-1080 nm 1060-1080 nm 1060-1080 nm
Modulation 20 kHz ÷ 100 kHz 30 kHz ÷ 100 kHz 50 kHz ÷ 100 kHz
Aiming Beam 1 mW @ 635 nm 5 mW @ 635 nm 5 mW @ 635 nm
Temperature range - operative Temperature range - storing
5°C do 50°C -10°C do 60°C
5°C do 40°C -10C do 60°C
10°C do 35°C -10C do 60°C
Cooling Forsed Air Forsed Air Forsed Air
Marking speed Up to 2000mm/sec Up to 2000mm/sec Up to 2000mm/sec
The various parts of the laser can interact with the marking system. Marking set consists of two parts:
PCI electronic board (iMarkPCI) that ensures control signals flow to the laser and an efficient software
(Lighter) that provides graphical user interface for marking designs and marking process automation.
Graphic editor of software Lighter creates and edits strings, shapes, barcodes, matrix codes.
It is also able to import logos in raster and vector format.
Objective F-Theta mm 63S 100S 160S 254S 100L 160L 254L 330L Working distance mm 72 113 177 280 97 175 297 387 Working area (mm x mm)
35x35 50x50 100x100 140x140 60x60 110x110 180x180 220x220
Examples of use:
MEPAC VŽDY NĚCO NOVÉHO
Pro naše zákazníky máme velkou škálu produktů pro přesné strojírenství od nástrojů po přístrojovou techniku, laserové systémy. Veškeré naše produkty můžete také zakoupit na našem e-shopu wwww.mepac-eshop.cz. Naši obchodní zástupci nabízejí odborné poradenství v oblasti přesného strojírenství, ale také kompletní sortiment našeho zboží v pojízdných prodejnách. V sekci prodeje přístrojů a nástrojů zastupujeme na Českém, Slovenském a Polském trhu, 17 zahraničních firem.
Veškeré naše zboží zakoupíte na www.mepac-eshop.cz
Věříme, že i Vaše firma najde v našem bohatém sortimentu užitečné přístroje či nástroje pro Vaši práci.
kolektiv firem MEPAC CZ, s.r.o. a MEPAC SK, s.r.o.
MEPAC CZ, s.r.o. tel. /mob. /fax e-mail
Central office TŘINEC
Nebory 547
739 61 Třinec
www.mepac.cz
tel.: 558 348 112
mob.: 603 515 357 (shop)
mob.: 776 086 591 (shop)
mob.: 773 784 101 (workshop)
Branch office – VSETÍN
Průmyslový areál
Jasenice objekt 6
755 01 Vsetín
tel.: 571 417 771
mob.: 739 075 567 (production)
mob.: 739 366 619 (production)
mob.: 739 453 809 (shop)
mob.: 608 710 904 (shop)
Branch office – VRBNO
Zlatohorská 648
739 26 Vrbno p. Pradědem
tel.: 554 725 305
mob.: 603 507 946 (shop)
mob.: 739 204 755 (shop)
mob.: 775 569 917 (workshop)
fax: 554 725 035
Branch office – POLSKO
Czechowice - Dziedzice
tel.: 0048 910 085 519
mob.: 0048 513 041 157 [email protected]
MEPAC SK, s.r.o.
Kotešová 817
013 61 Kotešová (okres Bytča)
www.mepac.sk
tel.: 00421 910 082 933
mob.: 00421 917 120 075
mob.: 00421 905 910 944