features of your elemental h2o pump -...

3
rev:52013 Thank you for choosing Elemental Solutions! Your satisfaction and success are important to us. For best results, carefully read the following instructions before using your Elemental H 2 O Pump. Features of your Elemental H 2 O Pump • Submersible or inline operation (EHP204 and EHP216 submersible only) • Adjustable flow • Durable ceramic shaft • Superior-quality, corrosion-resistant housing • Waterproof motor casing • 1-year warranty EHP216 Max. Output: 171 gph Max. Lift: 4.75’ Cord Length: 6’ Input Voltage: 120V Frequency: 60Hz Wattage: 9.5W Pressure: 2.04 psi Included Fitting Multi-step 1 /2” & 3 /4” Barb x 1 /2” Thread EHP204 Max. Output: 97 gph Max. Lift: 2.45’ Cord Length: 6’ Input Voltage: 120V Frequency: 60Hz Wattage: 5W Pressure: 1.05 psi Fixed 1 /2” fitting included Included Fittings 1 /2” Barb x 1 /2” Thread (2) 3 /4” Barb x 1 /2” Thread EHP240 Max. Output: 291 gph Max. Lift: 5.9’ Cord Length: 10’ Input Voltage: 120V Frequency: 60Hz Wattage: 16W Pressure: 2.53 psi Included Fittings 1 /2” Barb x 1 /2” Thread (2) 3 /4” Barb x 1 /2” Thread EHP246 Max. Output: 370 gph Max. Lift: 7.54’ Cord Length: 10’ Input Voltage: 120V Frequency: 60Hz Wattage: 24W Pressure: 3.24 psi EHP252 Max. Output: 529 gph Max. Lift: 7.9’ Cord Length: 10’ Input Voltage: 120V Frequency: 60Hz Wattage: 33W Pressure: 3.39 psi Included Fittings 1 /2” Barb x 1 /2” Thread 3 /4” Barb x 1 /2” Thread 1” Barb x 5 /8” Thread EHP262 Max. Output: 793 gph Max. Lift: 9.18’ Cord Length: 10’ Input Voltage: 120V Frequency: 60Hz Wattage: 58W Pressure: 3.94 psi Included Fittings 3 /4” barb x 1 /2” thread 1” barb x 1 /2” thread 1” barb x 5 /8” thread EHP272 Max. Output: 1110 gph Max. Lift: 12.13’ Cord Length: 10’ Input Voltage: 120V Frequency: 60Hz Wattage: 92W Pressure: 5.21 psi Included Fittings 3 /4” Barb x 5 /8” Thread 1” Barb x 5 /8” Thread 1” Barb x 3 /4” Thread E300489 50XJ

Upload: others

Post on 17-Apr-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Features of your Elemental H2O Pump - Microsoftbwgs.blob.core.windows.net/docs/H2O_Pump_Instructions_2013.pdf · elemental h 2o pump warranty is void if: • not accompanied by the

rev:52013

Thank you for choosing Elemental Solutions! Your satisfaction and success are important to us. For best results, carefully read the following

instructions before using your Elemental H2O Pump.

Features of your Elemental H2O Pump•Submersibleorinlineoperation(EHP204andEHP216submersibleonly)•Adjustableflow•Durableceramicshaft•Superior-quality,corrosion-resistanthousing•Waterproofmotorcasing•1-yearwarranty

EHP216Max.Output:171gphMax.Lift:4.75’CordLength:6’InputVoltage:120VFrequency:60HzWattage:9.5WPressure:2.04psiIncluded FittingMulti-step1/2” & 3/4” Barb x 1/2” Thread

EHP204Max.Output:97gphMax.Lift:2.45’CordLength:6’InputVoltage:120VFrequency:60HzWattage:5WPressure:1.05psiFixed 1/2” fitting included Included Fittings

1/2” Barb x 1/2” Thread(2)3/4” Barb x 1/2” Thread

EHP240Max.Output:291gphMax.Lift:5.9’CordLength:10’InputVoltage:120VFrequency:60HzWattage:16WPressure:2.53psi

Included Fittings1/2” Barb x 1/2” Thread(2)3/4” Barb x 1/2” Thread

EHP246Max.Output:370gphMax.Lift:7.54’CordLength:10’InputVoltage:120VFrequency:60HzWattage:24WPressure:3.24psi

EHP252Max.Output:529gphMax.Lift:7.9’CordLength:10’InputVoltage:120VFrequency:60HzWattage:33WPressure:3.39psi

Included Fittings1/2” Barb x 1/2” Thread 3/4” Barb x 1/2” Thread1”Barbx5/8” Thread

EHP262Max.Output:793gphMax.Lift:9.18’CordLength:10’InputVoltage:120VFrequency:60HzWattage:58WPressure:3.94psiIncluded Fittings3/4” barb x 1/2” thread1”barbx1/2” thread1”barbx5/8” thread

EHP272Max.Output:1110gphMax.Lift:12.13’CordLength:10’InputVoltage:120VFrequency:60HzWattage:92WPressure:5.21psiIncluded Fittings3/4” Barb x 5/8” Thread1”Barbx5/8” Thread1”Barbx3/4” Thread

E30048950XJ

Page 2: Features of your Elemental H2O Pump - Microsoftbwgs.blob.core.windows.net/docs/H2O_Pump_Instructions_2013.pdf · elemental h 2o pump warranty is void if: • not accompanied by the

•Readallinstructionscarefullybeforeoperatingtheunit.•Ensurethepowersourcemeetstherequirementslistedonthespecificationlabel.•Donotusetheunitifthepowercordorplugbecomesdamaged.•Iftheunitisincontactwithwater,donottouchthewaterwithoutunpluggingtheunit.•Formadriploopwiththepowercordbyensuringpartofthecordisalwayslowerthantheoutlet,which will prevent water from running down the cord to the plug and outlet. If the plug or outlet does become wet, disconnect the fuse or circuit breaker supplying power to the outlet before touching the plug.•Donotpickuptheunitusingthepowercord.•Donotoperatetheunitdry.•Donotusewithwaterhotterthan104°Forwithanycombustibleliquid.•Donotoperatetheunitattemperatureslowerthan46°F.•Ifconnectedtubingbecomesclogged,turnofftheunitimmediatelytopreventthemotor from overloading.•Disconnecttheunitfrompowerbeforecleaningitorifitisnotinuseforaprolongedperiodoftime.•Donotattempttorepairtheunit.

Installation1.Attachtubingtotheinletand/oroutletfittingsasneeded.2.Adjustwaterflowusingthewaterflowadjustmentknob.Forsubmersible-onlyunits,usethebuttonon top of the unit.3.Mounttheunitonaflat,stablesurfaceusingthesuctioncups.4.Plugtheunitintoa120Voutlet.

Maintenance and Storage•Regularlycleantheimpellerassemblytomaintainoptimalperformance.Pulloffthefrontcoverofthe unit.Twisttheimpellercovercounterclockwisetoremove.Rinsedebrisfromtheimpellerandreassemble the unit.•Regularlycleanthefilterventsonthefrontoftheunitandthefilterlocatedbehindthefrontcover.•Removeallwaterfrominsidetheunit,cleanitthoroughlyandallowittodrybeforestoringit.

TroubleshootingThe unit isn’t operating. Ensure the unit is plugged in, the power source is turned on, and the impeller is free of debris.

The pump motor turns on and off but fails to pump water.Ensuretheunitisconnectedtoapowersourcewiththecorrectvoltageandfrequency.Ensuretheinletand outlet fittings are free of debris. Ensure the water intake is fully submerged.

The unit is operating, but the water flow is sluggish or nonexistent. Ensure the water intake is fully submerged. The tubing may need to be shortened or cleared of debris. If the pump is operating inline, there may be air in the impeller chamber, which can be removed by submerging the unit and turning it on and off several times.

Warning

Page 3: Features of your Elemental H2O Pump - Microsoftbwgs.blob.core.windows.net/docs/H2O_Pump_Instructions_2013.pdf · elemental h 2o pump warranty is void if: • not accompanied by the

7854 North State Road 37Bloomington, IN 47404

Phone: 888-464-9676Email: [email protected]

Sunleaves Garden Products

Limited 1-Year Warranty TermsSunleaves Garden Products warrants this product to the original purchaser to be free of defective materials and workmanship under normal use and service for 1 year from the original date of purchase. Sunleaves Garden Products, at its option, will repair or replace components of this product if they are found to be defective in material or workmanship within the warranty period. If Sunleaves, at its sole discretion, determines that the components are defective in material or workmanship, then Sunleaves, at its option, will either repair or replace the components, provided that (1) a copy of the original proof of purchase for this product by the original purchaser is delivered to Sunleaves; (2) the components have not been tampered with, disassembled, repaired by unauthorized persons or altered; and (3) the components have not been damaged as a result of commercial use, lack of reasonable and proper maintenance, abusive or unreasonableuse, or supplemental damage. In no event shall the cost of repair or replacement exceed the original purchase price. SUNLEAVES SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION DAMAGE OR INJURY CAUSED TO OTHER PRODUCTS, MACHINERY, BUILDINGS OR PROPERTY; LOSS OF PROFITS, TIME OR PRODUCT; OR INCONVENIENCE. SUNLEAVES FURTHER DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Elemental H2O Pump Warranty Is Void If:•NOTACCOMPANIEDBYTHEORIGINALPROOFOFPURCHASE.•ELEMENTALH2O PUMP HAS BEEN USED IN A NONSTANDARD WAY, INCLUDING GENERAL MISUSE AND OUTDOOR USE.•ELEMENTALH2O PUMP HAS BEEN DAMAGED AS A RESULT OF ACCIDENT, IMPROPER INSTALLATION, ALTERATION, OR FIRE, FLOOD OR OTHER NATURAL DISASTER.

Don’t forget to include the following items if you are returning your Elemental H2O Pump to the place of purchase:

•Legiblecopyofyourproperlydatedsalesreceipt•Thiscompletedform

Name: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Address: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Phone #: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Email Address: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RMA #: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Explain the problem: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Elemental Solutions 1-Year Limited WarrantyAll Elemental H2O Pumps are protected against manufacturer defect by a limited 1-year manufacturer’s warranty.

rev:52013

If the retailer is unable to resolve the problem:

1. Call our toll-free number at 888-464-9676 or email [email protected] to receive warranty information and your RMA number if the product is being returned.

2. In the unlikely event you must return the defective product to Sunleaves, carefully package the problem product.

3. Complete the form below and enclose it with your shipment along with a legible copy of your properly dated sales receipt. You must write your RMA number on the outside of the package. Because Sunleaves is not responsible for products damaged in shipping, we recommend insuring your package.

Sunleaves Product Warranty ClaimsTo obtain warranty service in the unlikely event that your product fails to operate, return the product to the place of purchase. Often the retailerwillbeabletoexaminetheproductincloserdetail,determinetheproblemandevenfixtheproductonsite.