fender-rub
DESCRIPTION
Increase tire or fender clearance, flare fenders and/ or repair wheel arch collision damage with this professional-grade forming tool. The Fender Roller bolts directly to hub flange.TRANSCRIPT
27Order toll-free 800-345-1178 BODY AND FENDER
Wider tires without the fender rub!Eastwood Fender Roller
• Adjustable roller controls forming• Non-marring Delrin® roller preserves finish• Fits a wide range of automotive and light
truck applicationsIncrease tire or fender clearance, flare fenders and/or repair wheel arch collision damage with this professional-grade forming tool. The Fender Roller bolts directly to hub flange. Elongated holes in adapter plate fit all popular 4 and 5 bolt car hubs, and is held in place with the included dished washers and vehicle’s lug nuts. Forming arm adjusts from 14” to 22-3/4”. Delrin® ball bearing forming roller is tough enough to form the fender without damaging the paint. Limited one-year warranty. Sorry, the Fender Roller is not returnable – if defective, it will be replaced.31158 EastwoodFenderRoller$269.99
“Absolutely terrific results. Fender lips are rolled, not beaten, and the tool makes it so easy. The first fender took about 30 minutes (long learning curve – get it...curve?), but now it is a snap. I will do both Mustangs using this thing. Also, I found out it is great at smoothing the beaten-in front fender lips.” – Paul, Dallas
Heat it up before you roll it! Strip paint, loosen adhesive, remove stickers and vinyl graphics, weld plastic, solder, apply heat-shrink tubing, and more. Thumbwheel control allows you to vary output between 140°-1,100°F (60°-593°C) with a 2-speed fan. Includes: heat gun, 4 nozzles, scraper and special spokeshave-style handle heads, case. One-year mfr’s warranty.43522VariableOutputHeatGunKit$49.99
One kit includes everything you’ll need to Keep On Rollin’ Includes: (31158) Eastwood Fender Roller and (43522) Heat gun kit.50497 ProFenderRollerKit
Orig.$319.98Save$19.99Now$299.99
SAVE$1998
50497
Outer fender Fender
lip
Mounts to wheel studs
Apply heat here