ferrostaal piping supply - catalogue

www.ferrostaal-piping.com

Ferrostaal Piping Supply B.V.Moerseweg 34927 SJ Hooge Zwaluwe Netherlands

Phone +31. 168. 489-200 Fax +31. 168. 483-197


Phone +31. 168. 489-200 Fax +31. 168. 483-197 Mail [email protected]

All information in this book is subject to change. Whilst every effort has been made to ensure the accuracy of this publication, neither Ferrostaal Piping Supply nor its agents nor associated companies take any responsibilty for any errors or omissions. The information is current as at date of publication.

We try to keep this catalogue up to date and improve it wherever possible. Therefore we would be grateful for any remarks or cor-rections from you.

Ferrostaal Piping Supply GmbHHohenzollernstr. 2445128 EssenGermany

Phone +49. 201. 818-2044Fax +49. 201. 818-3930Mail [email protected]

Solutions close at hand

Ferrostaal Piping Supply CatalogueFor the petrochemical, chemical, oil and gas industry

Turning Ideas into Reality.Pub

licat

ion

dat

e: 0

3.20

14


Phone +49. 201. 818-2044Fax +49. 201. 818-3930

Our global presence means that we are always represented locally

through our partner network and group companies. Please visit

www.ferrostaal-piping.com to find representatives near you.

ASME pipe schedule list

Dimensions in mm and Weights in kg/mASME B36.10 and ASME B36.19 (indicated with suffix “S”)

Schedule No. or Wallthickness Identifier1) austenitic steel2)

Nominal Pipe Size (inches)

Nomi-nal Size DN

O.D. mm

ShippingVol/m m³

10 20 30 STD 40

40 60 XS 80

80 100 120 140 160 XXS 5S 10S

STD 40S

XS 80S

1/8 6 10.3 0.00011.73 1.73 2.41 2.41 1.24 1.73 2.41

0.37 0.37 0.47 0.47 0.28 0.37 0.47

1/4 8 13.7 0.00022.24 2.24 3.02 3.02 1.65 2.24 3.020.63 0.63 0.80 0.80 0.50 0.64 0.81

3/8 10 17.1 0.00032.31 2.31 3.20 3.20 1.65 2.31 3.200.84 0.84 1.10 1.10 0.64 0.86 1.12

1/2 15 21.3 0.00052.77 2.77 3.73 3.73 4.78 7.47 1.65 2.11 2.77 3.731.27 1.27 1.62 1.62 1.95 2.55 0.81 1.02 1.29 1.65

3/4 20 26.7 0.00072.87 2.87 3.91 3.91 5.56 7.82 1.65 2.11 2.87 3.911.69 1.69 2.20 2.20 2.90 3.64 1.03 1.30 1.71 2.23

1 25 33.4 0.00113.38 3.38 4.55 4.55 6.35 9.09 1.65 2.77 3.38 4.552.50 2.50 3.24 3.24 4.24 5.45 1.31 2.13 2.54 3.29

1.1/4 32 42.2 0.00183.56 3.56 4.85 4.85 6.35 9.70 1.65 2.77 3.56 4.853.39 3.39 4.47 4.47 5.61 7.77 1.68 2.73 3.44 4.53

1.1/2 40 48.3 0.00233.68 3.68 5.08 5.08 7.14 10.15 1.65 2.77 3.68 5.084.05 4.05 5.41 5.41 7.25 9.56 1.93 3.16 4.11 5.49

2 50 60.3 0.00363.91 3.91 5.54 5.54 8.74 11.07 1.65 2.77 3.91 5.545.44 5.44 7.48 7.48 11.11 13.44 2.42 3.99 5.52 7.60

2.1/2 65 73.0 0.00535.16 5.16 7.01 7.01 9.53 14.02 2.11 3.05 5.16 7.018.63 8.63 11.41 11.41 14.92 20.39 3.75 5.35 8.77 11.59

3 80 88.9 0.00795.49 5.49 7.62 7.62 11.13 15.24 2.11 3.05 5.49 7.62

11.29 11.29 15.27 15.27 21.35 27.68 4.59 6.56 11.47 15.51

3.1/2 101.6 0.01035.74 5.74 8.08 8.08 2.11 3.05 5.74 8.08

13.57 13.57 18.63 18.63 5.26 7.53 13.78 18.92

4 100 114.3 0.01306.02 6.02 8.56 8.56 11.13 13.49 17.12 2.11 3.05 6.02 8.56

16.07 16.07 22.32 22.32 28.32 33.54 41.03 5.93 8.50 16.32 22.67

5 125 141.3 0.02006.55 6.55 9.53 9.53 12.70 15.88 19.05 2.77 3.40 6.55 9.53

21.77 21.77 30.97 30.97 40.28 49.11 57.43 9.61 11.74 22.10 31.44

6 150 168.3 0.02807.11 7.11 10.97 10.97 14.27 18.26 21.95 2.77 3.40 7.11 10.97

28.26 28.26 42.56 42.56 54.20 67.56 79.22 11.48 14.04 28.70 43.22

8 200 219.1 0.04806.35 7.04 8.18 8.18 10.31 12.70 12.70 15.09 18.26 20.62 23.01 22.23 2.77 3.76 8.18 12.70

33.31 36.81 42.55 42.55 53.08 64.64 64.64 75.92 90.44 100.92 111.27 107.92 14.90 20.12 42.55 65.64

10 250 273.0 0.07506.35 7.80 9.27 9.27 12.70 12.70 15.09 18.26 21.44 25.40 28.58 25.40 3.40 4.19 9.27 12.70

41.77 51.03 60.31 60.31 81.55 81.55 96.01 114.75 133.06 155.15 172.33 155.15 22.95 28.20 61.22 82.78

12 300 323.8 0.10506.35 8.38 9.53 10.31 14.27 12.70 17.48 21.44 25.40 28.58 33.32 25.40 3.96 4.57 9.53 12.70

49.73 65.20 73.88 79.73 108.96 97.46 132.08 159.91 186.97 208.14 238.76 186.97 31.71 36.53 74.94 98.96

14 350 355.6 0.12606.35 7.92 9.53 9.53 11.13 15.09 12.70 19.05 23.83 27.79 31.75 35.71 3.96 4.78

54.69 67.90 81.33 81.33 94.55 126.71 107.39 158.10 194.96 224.65 253.56 281.70 34.87 41.99

16 400 406.4 0.16506.35 7.92 9.53 9.53 12.70 16.66 12.70 21.44 26.19 30.96 36.53 40.49 4.19 4.78

62.64 77.83 93.27 93.27 123.30 160.12 123.30 203.53 245.56 286.64 333.19 365.35 42.20 48.07

18 450 457.2 0.20906.35 7.92 11.13 9.53 14.27 19.05 12.70 23.83 29.36 34.93 39.67 45.24 4.19 4.78

70.57 87.71 122.38 105.16 155.80 205.74 139.15 254.55 309.62 363.56 408.26 459.37 47.53 54.15

20 500 508.0 0.25806.35 9.53 12.70 9.53 15.09 20.62 12.70 26.19 32.54 38.10 44.45 50.01 4.78 5.54

78.55 117.15 155.12 117.15 183.42 247.83 155.12 311.17 381.53 441.49 508.11 564.81 60.23 69.70

22 558.8 0.31206.35 9.53 12.70 9.53 22.23 12.70 28.58 34.93 41.28 47.63 53.98 4.78 5.54

86.54 129.13 171.09 129.13 294.25 171.09 373.83 451.42 527.02 600.63 672.26 66.31 76.75

24 600 609.6 0.37206.35 9.53 14.27 9.53 17.48 24.61 12.70 30.96 38.89 46.02 52.37 59.54 5.54 6.35

94.53 141.12 209.64 141.12 255.41 355.26 187.06 442.08 547.71 640.03 720.15 808.22 83.80 95.92

26 660.4 0.43607.92 12.70 9.53 12.70

127.36 202.72 152.87 202.72

28 700 711.2 0.50607.92 12.70 15.88 9.53 12.70

137.32 218.69 272.23 164.85 218.69

30 762.0 0.58107.92 12.70 15.88 9.53 12.70

147.28 234.67 292.18 176.80 234.67

32 800 812.8 0.66107.92 12.70 15.88 9.53 17.48 12.70

157.24 250.64 312.15 188.82 342.91 250.64

34 863.6 0.74607.92 12.70 15.88 9.53 17.48 12.70

167.20 266.61 332.12 200.31 364.90 266.61

36 900 914.4 0.83607.92 12.70 15.88 9.53 19.05 12.70

176.96 282.27 351.70 212.56 420.42 282.27

38 965.2 0.93209.53 12.70

224.54 298.24

40 1000 1016.0 1.03209.53 12.70

236.53 314.22

42 1066.8 1.13809.53 12.70

248.48 330.15

44 1100 1117.6 1.24909.53 12.70

260.42 346.06

46 1168.4 1.36509.53 12.70

272.36 361.97

48 1200 1219.2 1.48609.53 12.70

284.30 377.88

1) The nominal plain end mass, in kilograms per meter, is calculated using the following formular: Wpe = 0.0246615 (D - t)*t

D = Outside Diameter in mm, t = specified wall thickness in mm

Product Type DIN Standard DIN Material no. DIN Short Name EN Standard EN Material no. EN Short Name ASTM / ASME Material & Grade 3)

Seamless stainless tubes, AD 2000-W2/-W10

17458 1.4301 X 5 CrNi 18 10 10216-5 1.4301 X5CrNi18-10 A / SA 312 TP30417458 1.4306 X 2 CrNi 19 11 10216-5 1.4306 X2CrNi19-11 A / SA 312 TP304L17458 1.4401 X 5 CrNiMo 17 12 2 10216-5 1.4401 X5CrNiMo17-12-2 A / SA 312 TP31617458 1.4404 X 2 CrNiMo 17 13 2 10216-5 1.4404 X2CrNiMo17-12-2 A / SA 312 TP316L17458 1.4541 X 6 CrNi 18 10 10216-5 1.4541 X6CrNiTi18-10 A / SA 312 TP32117458 1.4571 X 6 CrNiMoTi 17 12 2 10216-5 1.4571 X6CrNiMoTi17-12-2 A / SA 312 TP316 Ti17458 1.4550 X 6 CrNiNb 18 10 10216-5 1.4550 X6CrNiNb18-10 A / SA 312 TP347VdTÜV 418 1.4462 X 2 CrNiMoN 22 5 3 10216-5 1.4462 X2CrNiMoN22-5-3 A790 S 31803

Welded stainless steel tubes, AD 2000-W2/-W10

17457 1.4301 X 5 CrNi 18 10 10217-7 1.4301 X5CrNi18-10 A / SA 312 TP30417457 1.4306 X 2 CrNi 19 11 10217-7 1.4306 X2CrNi19-11 A / SA 312 TP304L17457 1.4401 X 5 CrNiMo 17 12 2 10217-7 1.4401 X5CrNiMo17-12-2 A / SA 312 TP31617457 1.4404 X 2 CrNiMo 17 13 2 10217-7 1.4404 X2CrNiMo17-12-2 A / SA 312 TP316L17457 1.4541 X 6 CrNi 18 10 10217-7 1.4541 X6CrNiTi18-10 A / SA 312 TP32117457 1.4571 X 6 CrNiMoTi 17 12 2 10217-7 1.4571 X6CrNiMoTi17-12-2 A / SA 312 TP316Ti17457 1.4550 X 6 CrNiNb 18 10 10217-7 1.4550 X6CrNiNb18-10 A / SA 312 TP347VdTÜV 418 1.4462 X 2 CrNiMoN 22 5 3 10217-7 1.4462 X2CrNiMoN22-5-3 A 790 S 31803

Stainless steel elbows, tees, reducers, caps

2609 1) 1.4301 X 5 CrNi 18 10 10253-4 1.4301 X5CrNi18-10 A / SA 403 WP3042609 1) 1.4306 X 2 CrNi 19 11 10253-4 1.4306 X2CrNi19-11 A / SA 403 WP304L2609 1) 1.4401 X 5 CrNiMo 17 12 2 10253-4 1.4401 X5CrNiMo17-12-2 A / SA 403 WP3162609 1) 1.4404 X 2 CrNiMo 17 13 2 10253-4 1.4404 X2CrNiMo17-12-2 A / SA 403 WP316L2609 1) 1.4541 X 6 CrNi 18 10 10253-4 1.4541 X6CrNiTi18-10 A / SA 403 WP3212609 1) 1.4571 X 6 CrNiMoTi 17 12 2 10253-4 1.4571 X6CrNiMoTi17-12-2 A / SA 403 WP316Ti2609 1) 2) 1.4550 X 6 CrNiNb 18 10 10253-4 1.4550 X6CrNiNb18-10 A / SA 403 WP3472609 1) 2) 1.4462 X 2 CrNiMoN 22 5 3 10253-4 1.4462 X2CrNiMoN22-5-3 A815 S 31803

Stainless Steel Flanges

17440 1.4301 X 5 CrNi 18 10 10222-5 1.4301 X5CrNi18-10 A / SA 182 F30417440 1.4306 X 2 CrNi 19 11 10250-4 1.4306 X2CrNi19-11 A / SA 182 F304L17440 1.4401 X 5 CrNiMo 17 12 2 10222-5 1.4401 X5CrNiMo17-12-2 A / SA 182 F31617440 1.4404 X 2 CrNiMo 17 13 2 10222-5 1.4404 X2CrNiMo17-12-2 A / SA 182 F316L17440 1.4541 X 6 CrNi 18 10 10222-5 1.4541 X6CrNiTi18-10 A / SA 182 F316Ti17440 1.4571 X 6 CrNiMoTi 17 12 2 10222-5 1.4571 X6CrNiMoTi17-12-2 A / SA 182 F32117440 1.4550 X 6 CrNiNb 18 10 10222-5 1.4550 X6CrNiNb18-10 A / SA 182 F347VdTÜV 418 1.4462 X 2 CrNiMoN 22 5 3 10222-5 1.4462 X2CrNiMoN22-5-3 A / SA 182 F51

Notes:1) partly replaced by 10253-2 (10253-2 includes technical delivery reqirements and dimensional standards)2) Standard can be used accordingly (Material not listed)3) for electric fusion welded pipes specification A / SA 358 shall be used. Material types remain unchanged.

Comparison List - Stainless Steel Tubes and Elbows, Fittings and Flanges

Comparison List - Dimensional Standards for Fittings and Flanges

Product Type DIN Standard EN Standard ASTM / ASME StandardElbows LR 2605-1 / 2 10253 Type A/ B ASME B16.9Tees 2615-1 / 2 10253 Type A/ B ASME B16.9Reducers 2616-1 / 2 10253-2 Type A/ B ASME B16.9Caps 2617 10253-2 ASME B16.9

FlangesProduct Type Pressure Rating Class DIN Standard EN Standard ASTM / ASME StandardWelding Neck Flange PN6 2631 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbs

PN10 2632 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN16 2633 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN25 2634 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN40 2635 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN64 2636 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN100 2637 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN160 2638 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN250 2628 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN320 2629 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN400 2627 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbs

Blind Flanges PN6 - PN100 2527 1092-1 Type 05 ANSI B 16.5 / 150 lbs - 2500 lbsThreaded Flanges PN6 2565 1092-1 Type 13 ANSI B 16.5 / 150 lbs - 2500 lbs

PN10/ PN16 2566 1092-1 Type 13 ANSI B 16.5 / 150 lbs - 2500 lbsPN40 2567 1092-1 Type 13 ANSI B 16.5 / 150 lbs - 2500 lbs

Flat Welding Flanges PN6 2573 1092-1 Type 01 ANSI B 16.5 / 150 lbs - 2500 lbsPN10 2576 1092-1 Type 01 ANSI B 16.5 / 150 lbs - 2500 lbs

Hubbed Slip-On Flanges PN10 86029 1092-1 Type 12 ANSI B 16.5 / 150 lbs - 2500 lbsPN16 86030 1092-1 Type 12 ANSI B 16.5 / 150 lbs - 2500 lbs

Lapped Flanges PN6 2641 1092-1 Type 02 ANSI B 16.5 / 150 lbs - 2500 lbsPN10 2642 1092-1 Type 02 ANSI B 16.5 / 150 lbs - 2500 lbs

Lapped Flanges, Plain Collars PN25 2655 1092-1 Type 02 ANSI B 16.5 / 150 lbs - 2500 lbsPN40 2656 1092-1 Type 02 ANSI B 16.5 / 150 lbs - 2500 lbs

Lapped Joint Short Stub Ends PN 10 2673 1092-1 Type 04 ANSI B 16.5 / 150 lbs - 2500 lbs

Comparison Lists Comparison Lists

2) Weight calculation acc. to formula:

Wpe = 0.02504 (D - t)*t

3Ferrostaal Best Partner for Piping Supply

FerrostaalBest Partner for Piping Supply

Ferrostaal Piping Supply is your partner for pipes and all essential accessories. We

have more than 60 years of product and business expertise and offer a comprehensive

service. As an international supplier we meet your material and logistical demands. Our

clients can rely on a flexible and dynamic team supported by the worldwide network of

the Ferrostaal Group.

We deliver complete packages either from our central warehouses or from strategically

selected suppliers around the globe. This, combined with our comprehensive service, is

sure to satisfy our customers’ requirements fully and individually every time.

Our long-term partnership with major international customers is based on their rec-

ognition of our dedication, reliability and the consistent high quality of our products

and services. The main areas of expertise of Ferrostaal Piping Supply are the oil and

gas, petrochemical, chemical and power industries. Furthermore, we are the right

choice in the shipbuilding industry and for the commodity business.

ASME pipe schedule list

Dimensions in mm and Weights in kg/mASME B36.10 and ASME B36.19 (indicated with suffix “S”)

Schedule No. or Wallthickness Identifier1) austenitic steel2)


Nomi-nal Size DN

O.D. mm

ShippingVol/m m³

10 20 30 STD 40

40 60 XS 80

80 100 120 140 160 XXS 5S 10S

STD 40S

XS 80S

1/8 6 10.3 0.00011.73 1.73 2.41 2.41 1.24 1.73 2.41

0.37 0.37 0.47 0.47 0.28 0.37 0.47

1/4 8 13.7 0.00022.24 2.24 3.02 3.02 1.65 2.24 3.020.63 0.63 0.80 0.80 0.50 0.64 0.81

3/8 10 17.1 0.00032.31 2.31 3.20 3.20 1.65 2.31 3.200.84 0.84 1.10 1.10 0.64 0.86 1.12

1/2 15 21.3 0.00052.77 2.77 3.73 3.73 4.78 7.47 1.65 2.11 2.77 3.731.27 1.27 1.62 1.62 1.95 2.55 0.81 1.02 1.29 1.65

3/4 20 26.7 0.00072.87 2.87 3.91 3.91 5.56 7.82 1.65 2.11 2.87 3.911.69 1.69 2.20 2.20 2.90 3.64 1.03 1.30 1.71 2.23

1 25 33.4 0.00113.38 3.38 4.55 4.55 6.35 9.09 1.65 2.77 3.38 4.552.50 2.50 3.24 3.24 4.24 5.45 1.31 2.13 2.54 3.29

1.1/4 32 42.2 0.00183.56 3.56 4.85 4.85 6.35 9.70 1.65 2.77 3.56 4.853.39 3.39 4.47 4.47 5.61 7.77 1.68 2.73 3.44 4.53

1.1/2 40 48.3 0.00233.68 3.68 5.08 5.08 7.14 10.15 1.65 2.77 3.68 5.084.05 4.05 5.41 5.41 7.25 9.56 1.93 3.16 4.11 5.49

2 50 60.3 0.00363.91 3.91 5.54 5.54 8.74 11.07 1.65 2.77 3.91 5.545.44 5.44 7.48 7.48 11.11 13.44 2.42 3.99 5.52 7.60

2.1/2 65 73.0 0.00535.16 5.16 7.01 7.01 9.53 14.02 2.11 3.05 5.16 7.018.63 8.63 11.41 11.41 14.92 20.39 3.75 5.35 8.77 11.59

3 80 88.9 0.00795.49 5.49 7.62 7.62 11.13 15.24 2.11 3.05 5.49 7.62

11.29 11.29 15.27 15.27 21.35 27.68 4.59 6.56 11.47 15.51

3.1/2 101.6 0.01035.74 5.74 8.08 8.08 2.11 3.05 5.74 8.08

13.57 13.57 18.63 18.63 5.26 7.53 13.78 18.92

4 100 114.3 0.01306.02 6.02 8.56 8.56 11.13 13.49 17.12 2.11 3.05 6.02 8.56

16.07 16.07 22.32 22.32 28.32 33.54 41.03 5.93 8.50 16.32 22.67

5 125 141.3 0.02006.55 6.55 9.53 9.53 12.70 15.88 19.05 2.77 3.40 6.55 9.53

21.77 21.77 30.97 30.97 40.28 49.11 57.43 9.61 11.74 22.10 31.44

6 150 168.3 0.02807.11 7.11 10.97 10.97 14.27 18.26 21.95 2.77 3.40 7.11 10.97

28.26 28.26 42.56 42.56 54.20 67.56 79.22 11.48 14.04 28.70 43.22

8 200 219.1 0.04806.35 7.04 8.18 8.18 10.31 12.70 12.70 15.09 18.26 20.62 23.01 22.23 2.77 3.76 8.18 12.70

33.31 36.81 42.55 42.55 53.08 64.64 64.64 75.92 90.44 100.92 111.27 107.92 14.90 20.12 42.55 65.64

10 250 273.0 0.07506.35 7.80 9.27 9.27 12.70 12.70 15.09 18.26 21.44 25.40 28.58 25.40 3.40 4.19 9.27 12.70

41.77 51.03 60.31 60.31 81.55 81.55 96.01 114.75 133.06 155.15 172.33 155.15 22.95 28.20 61.22 82.78

12 300 323.8 0.10506.35 8.38 9.53 10.31 14.27 12.70 17.48 21.44 25.40 28.58 33.32 25.40 3.96 4.57 9.53 12.70

49.73 65.20 73.88 79.73 108.96 97.46 132.08 159.91 186.97 208.14 238.76 186.97 31.71 36.53 74.94 98.96

14 350 355.6 0.12606.35 7.92 9.53 9.53 11.13 15.09 12.70 19.05 23.83 27.79 31.75 35.71 3.96 4.78

54.69 67.90 81.33 81.33 94.55 126.71 107.39 158.10 194.96 224.65 253.56 281.70 34.87 41.99

16 400 406.4 0.16506.35 7.92 9.53 9.53 12.70 16.66 12.70 21.44 26.19 30.96 36.53 40.49 4.19 4.78

62.64 77.83 93.27 93.27 123.30 160.12 123.30 203.53 245.56 286.64 333.19 365.35 42.20 48.07

18 450 457.2 0.20906.35 7.92 11.13 9.53 14.27 19.05 12.70 23.83 29.36 34.93 39.67 45.24 4.19 4.78

70.57 87.71 122.38 105.16 155.80 205.74 139.15 254.55 309.62 363.56 408.26 459.37 47.53 54.15

20 500 508.0 0.25806.35 9.53 12.70 9.53 15.09 20.62 12.70 26.19 32.54 38.10 44.45 50.01 4.78 5.54

78.55 117.15 155.12 117.15 183.42 247.83 155.12 311.17 381.53 441.49 508.11 564.81 60.23 69.70

22 558.8 0.31206.35 9.53 12.70 9.53 22.23 12.70 28.58 34.93 41.28 47.63 53.98 4.78 5.54

86.54 129.13 171.09 129.13 294.25 171.09 373.83 451.42 527.02 600.63 672.26 66.31 76.75

24 600 609.6 0.37206.35 9.53 14.27 9.53 17.48 24.61 12.70 30.96 38.89 46.02 52.37 59.54 5.54 6.35

94.53 141.12 209.64 141.12 255.41 355.26 187.06 442.08 547.71 640.03 720.15 808.22 83.80 95.92

26 660.4 0.43607.92 12.70 9.53 12.70

127.36 202.72 152.87 202.72

28 700 711.2 0.50607.92 12.70 15.88 9.53 12.70

137.32 218.69 272.23 164.85 218.69

30 762.0 0.58107.92 12.70 15.88 9.53 12.70

147.28 234.67 292.18 176.80 234.67

32 800 812.8 0.66107.92 12.70 15.88 9.53 17.48 12.70

157.24 250.64 312.15 188.82 342.91 250.64

34 863.6 0.74607.92 12.70 15.88 9.53 17.48 12.70

167.20 266.61 332.12 200.31 364.90 266.61

36 900 914.4 0.83607.92 12.70 15.88 9.53 19.05 12.70

176.96 282.27 351.70 212.56 420.42 282.27

38 965.2 0.93209.53 12.70

224.54 298.24

40 1000 1016.0 1.03209.53 12.70

236.53 314.22

42 1066.8 1.13809.53 12.70

248.48 330.15

44 1100 1117.6 1.24909.53 12.70

260.42 346.06

46 1168.4 1.36509.53 12.70

272.36 361.97

48 1200 1219.2 1.48609.53 12.70

284.30 377.88

1) The nominal plain end mass, in kilograms per meter, is calculated using the following formular: Wpe = 0.0246615 (D - t)*t

D = Outside Diameter in mm, t = specified wall thickness in mm

Product Type DIN Standard DIN Material no. DIN Short Name EN Standard EN Material no. EN Short Name ASTM / ASME Material & Grade 3)

Seamless stainless tubes, AD 2000-W2/-W10

17458 1.4301 X 5 CrNi 18 10 10216-5 1.4301 X5CrNi18-10 A / SA 312 TP30417458 1.4306 X 2 CrNi 19 11 10216-5 1.4306 X2CrNi19-11 A / SA 312 TP304L17458 1.4401 X 5 CrNiMo 17 12 2 10216-5 1.4401 X5CrNiMo17-12-2 A / SA 312 TP31617458 1.4404 X 2 CrNiMo 17 13 2 10216-5 1.4404 X2CrNiMo17-12-2 A / SA 312 TP316L17458 1.4541 X 6 CrNi 18 10 10216-5 1.4541 X6CrNiTi18-10 A / SA 312 TP32117458 1.4571 X 6 CrNiMoTi 17 12 2 10216-5 1.4571 X6CrNiMoTi17-12-2 A / SA 312 TP316 Ti17458 1.4550 X 6 CrNiNb 18 10 10216-5 1.4550 X6CrNiNb18-10 A / SA 312 TP347VdTÜV 418 1.4462 X 2 CrNiMoN 22 5 3 10216-5 1.4462 X2CrNiMoN22-5-3 A790 S 31803

Welded stainless steel tubes, AD 2000-W2/-W10

17457 1.4301 X 5 CrNi 18 10 10217-7 1.4301 X5CrNi18-10 A / SA 312 TP30417457 1.4306 X 2 CrNi 19 11 10217-7 1.4306 X2CrNi19-11 A / SA 312 TP304L17457 1.4401 X 5 CrNiMo 17 12 2 10217-7 1.4401 X5CrNiMo17-12-2 A / SA 312 TP31617457 1.4404 X 2 CrNiMo 17 13 2 10217-7 1.4404 X2CrNiMo17-12-2 A / SA 312 TP316L17457 1.4541 X 6 CrNi 18 10 10217-7 1.4541 X6CrNiTi18-10 A / SA 312 TP32117457 1.4571 X 6 CrNiMoTi 17 12 2 10217-7 1.4571 X6CrNiMoTi17-12-2 A / SA 312 TP316Ti17457 1.4550 X 6 CrNiNb 18 10 10217-7 1.4550 X6CrNiNb18-10 A / SA 312 TP347VdTÜV 418 1.4462 X 2 CrNiMoN 22 5 3 10217-7 1.4462 X2CrNiMoN22-5-3 A 790 S 31803

Stainless steel elbows, tees, reducers, caps

2609 1) 1.4301 X 5 CrNi 18 10 10253-4 1.4301 X5CrNi18-10 A / SA 403 WP3042609 1) 1.4306 X 2 CrNi 19 11 10253-4 1.4306 X2CrNi19-11 A / SA 403 WP304L2609 1) 1.4401 X 5 CrNiMo 17 12 2 10253-4 1.4401 X5CrNiMo17-12-2 A / SA 403 WP3162609 1) 1.4404 X 2 CrNiMo 17 13 2 10253-4 1.4404 X2CrNiMo17-12-2 A / SA 403 WP316L2609 1) 1.4541 X 6 CrNi 18 10 10253-4 1.4541 X6CrNiTi18-10 A / SA 403 WP3212609 1) 1.4571 X 6 CrNiMoTi 17 12 2 10253-4 1.4571 X6CrNiMoTi17-12-2 A / SA 403 WP316Ti2609 1) 2) 1.4550 X 6 CrNiNb 18 10 10253-4 1.4550 X6CrNiNb18-10 A / SA 403 WP3472609 1) 2) 1.4462 X 2 CrNiMoN 22 5 3 10253-4 1.4462 X2CrNiMoN22-5-3 A815 S 31803

Stainless Steel Flanges

17440 1.4301 X 5 CrNi 18 10 10222-5 1.4301 X5CrNi18-10 A / SA 182 F30417440 1.4306 X 2 CrNi 19 11 10250-4 1.4306 X2CrNi19-11 A / SA 182 F304L17440 1.4401 X 5 CrNiMo 17 12 2 10222-5 1.4401 X5CrNiMo17-12-2 A / SA 182 F31617440 1.4404 X 2 CrNiMo 17 13 2 10222-5 1.4404 X2CrNiMo17-12-2 A / SA 182 F316L17440 1.4541 X 6 CrNi 18 10 10222-5 1.4541 X6CrNiTi18-10 A / SA 182 F316Ti17440 1.4571 X 6 CrNiMoTi 17 12 2 10222-5 1.4571 X6CrNiMoTi17-12-2 A / SA 182 F32117440 1.4550 X 6 CrNiNb 18 10 10222-5 1.4550 X6CrNiNb18-10 A / SA 182 F347VdTÜV 418 1.4462 X 2 CrNiMoN 22 5 3 10222-5 1.4462 X2CrNiMoN22-5-3 A / SA 182 F51

Notes:1) partly replaced by 10253-2 (10253-2 includes technical delivery reqirements and dimensional standards)2) Standard can be used accordingly (Material not listed)3) for electric fusion welded pipes specification A / SA 358 shall be used. Material types remain unchanged.

Comparison List - Stainless Steel Tubes and Elbows, Fittings and Flanges

Comparison List - Dimensional Standards for Fittings and Flanges

Product Type DIN Standard EN Standard ASTM / ASME StandardElbows LR 2605-1 / 2 10253 Type A/ B ASME B16.9Tees 2615-1 / 2 10253 Type A/ B ASME B16.9Reducers 2616-1 / 2 10253-2 Type A/ B ASME B16.9Caps 2617 10253-2 ASME B16.9

FlangesProduct Type Pressure Rating Class DIN Standard EN Standard ASTM / ASME StandardWelding Neck Flange PN6 2631 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbs

PN10 2632 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN16 2633 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN25 2634 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN40 2635 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN64 2636 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN100 2637 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN160 2638 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN250 2628 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN320 2629 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbsPN400 2627 1092-1 Type 11 ANSI B 16.5 / 150 lbs - 2500 lbs

Blind Flanges PN6 - PN100 2527 1092-1 Type 05 ANSI B 16.5 / 150 lbs - 2500 lbsThreaded Flanges PN6 2565 1092-1 Type 13 ANSI B 16.5 / 150 lbs - 2500 lbs

PN10/ PN16 2566 1092-1 Type 13 ANSI B 16.5 / 150 lbs - 2500 lbsPN40 2567 1092-1 Type 13 ANSI B 16.5 / 150 lbs - 2500 lbs

Flat Welding Flanges PN6 2573 1092-1 Type 01 ANSI B 16.5 / 150 lbs - 2500 lbsPN10 2576 1092-1 Type 01 ANSI B 16.5 / 150 lbs - 2500 lbs

Hubbed Slip-On Flanges PN10 86029 1092-1 Type 12 ANSI B 16.5 / 150 lbs - 2500 lbsPN16 86030 1092-1 Type 12 ANSI B 16.5 / 150 lbs - 2500 lbs

Lapped Flanges PN6 2641 1092-1 Type 02 ANSI B 16.5 / 150 lbs - 2500 lbsPN10 2642 1092-1 Type 02 ANSI B 16.5 / 150 lbs - 2500 lbs

Lapped Flanges, Plain Collars PN25 2655 1092-1 Type 02 ANSI B 16.5 / 150 lbs - 2500 lbsPN40 2656 1092-1 Type 02 ANSI B 16.5 / 150 lbs - 2500 lbs

Lapped Joint Short Stub Ends PN 10 2673 1092-1 Type 04 ANSI B 16.5 / 150 lbs - 2500 lbs

Comparison Lists Comparison Lists

2) Weight calculation acc. to formula:

Wpe = 0.02504 (D - t)*t

4 Ferrostaal Piping Supply Covering the whole supply chain

Ferrostaal Piping SupplyCovering the whole supply chain

As a reliable partner, we add value to our products through the services we provide along the whole supply chain. Our dedicated staff have proven expertise in providing accurate, precise technical advice and exact specification reviews to op-timize costs and to ensure your satisfaction. Being a ‘one-stop’ supplier, we are capable of offering a full range of services: • Consulting/Financing• Warehousing• Logistics• Testing• Expediting• Certificate Handling• Fabrication• Coating

We have developed and implemented a Quality Management System in accordance with the requirements of ISO 9001, cer-tified by Lloyd‘s Register, in order to:

• Document the company‘s best business practices• Fulfill the requirements and expectations of our customers• Improve the overall management of the company

Our Safety Management System is also certified with an SCC** Certificate awarded by Lloyd‘s Register Quality Assurance GmbH.

5Ferrostaal Piping Supply Covering the whole supply chain

High level of products and services Our extensive stockholding capability and our global network of selected suppliers distinguishes us from our competitors and demonstrates our leadership in the marketplace. We oper-ate our own warehouse facility located between Rotterdam and Antwerp. This attribute makes us a unique force in the market because we can address our clients’ requirements immediately. We have outstanding stockroom capacities which gives us the ability to store all kinds of pipes, fitting and flanges.

We maintain long-term relationships with our customers through offering excellent product availability, logistical ex-pertise and competitive prices whilst maintaining a high level

of service and a flexible supply chain. We guarantee this by constantly training our personnel in new logistical trends, our commitment to implementing the latest software systems and our commitment to our customers.

Our international references represent the wide range of products and services we offer for our clients in many busi-ness areas. We invite you to look at our up to date reference list at www.ferrostaal-piping.com.

6

Standard Stock Material

Our aim is to meet our customers’ requirements in full. To meet their needs, we store a

huge range of different products in our warehouses and provide a worldwide supplier

network. We deliver products to meet our customers’ individual specifications promptly

when they need them and in a straight forward manner.

Standard Stock Material

At Ferrostaal Piping Supply, we are experts in designing dis-tribution networks for the total supply chain, thus reducing product lead times. A major aspect of our business model is speed. On a daily basis we ship large volumes of products from our warehouses, from our cross-docking facilities, or from our worldwide and strategically located suppliers.

We always implement modern supply chain management methods and techniques as we strive to improve upon our delivery times. Recent investments both in software applica-tions and hardware equipment have enabled us to respond instantly to customer orders. International shipping is a day-to-day affair for us. Our personnel can manage not only the transportation of your goods, but can also prepare the neces-sary documents for customs clearance.

When delivering from our centralized warehouse, located be-tween Rotterdam and Antwerp, and from our global network of selected suppliers, we assure:

• High level of product availability• Just in time delivery guaranteed• Competitive price level

We offer the following services:

• Wall thickness calculation by a TÜV approved program • Issuing of drawings • Special marking of the products, accurate to clients requirements • Special testing of materials • Documentation • Coating, painting, corrosion protection • Cutting, bevelling

The following materials of pipes, flanges and fittings are partof our stock programme.

7Standard Stock Material

Pipes Dimensions Wall Thickness

Carbon Steel

½" u.t.i. 24" STD & XS½" u.t.i. 6" S160 & XXS4" S1208" u.t.i.12" S30 / S100 / S120 / S1608 u.t.i.18" S2012" u.t.i. 14" S4010" u.t.i. 18" S80

Low Temp. Carbon Steel½" u.t.i. 24" STD & XS½" u.t.i. 6" S160

Carbon Steel, Galv. T&C½" u.t.i. 2" XS2" STD

Steel Pipes for Pipelines for Combustible Fluids

1" u.t.i. 20" in various schedules

Buttwelding Fittings Dimensions Wall Thickness

Carbon steel & Low Temp. Carbon Steel

Same sizes and wall thicknesses as for carbon steel pipesElbows (90°, 45°)Reducers (Conc. & Ecc.)Tees (Equal, Reducing)CapsLow Temp. Carbon Steel

Same sizes and wall thicknesses as for low temp. carbon steel pipes

Elbows (90°, 45°)Reducers (Conc. & Ecc.)Tees (Equal, Reducing)Caps

Flanges Pressure Rating Dimensions

Carbon Steel

Welding Neck Flanges150 u.t.i. 900

½" u.t.i. 24" in various schedules

1500 ½" u.t.i. 6" u.t.i. XXS150 28" u.t.i. 36" S30

Blind Flanges150 u.t.i. 600 ½" u.t.i. 24"900 & 1500 ½" u.t.i. 12"2500 ½" u.t.i. 4"

Lap Joint Flanges 150 & 300 ½" u.t.i. 10"Threaded Flanges (NPT) 150 & 300 ½" u.t.i. 2"Socket Welding Flanges 150 & 300 ½" u.t.i. 2", XSLong Welding Neck Flanges 300 u.t.i. 1500 1" u.t.i. 3"

Low Temp. Carbon Steel

Welding Neck Flange

150 & 300½" u.t.i. 24" in various schedules

600½" u.t.i. 12" in various schedules

900 & 1500 ½" u.t.i. 6" in various schedules2500 ½" u.t.i. 4" in various schedules

Blind Flange

150 & 300 ½" u.t.i. 24600 ½" u.t.i. 12"900 & 1500 ½" u.t.i. 6"2500 ½" u.t.i. 4

88 Pipes

Pipes

We are a leading supplier of seamless and welded pipes

of all grades and dimensions. We stock seamless pipes

up to 24’’ in the high and low temperature range. The

pipes are according to ASTM and API in the complete

schedule series.

Dimensions and Tolerances for Bevelled Ends on Pipes and Fittings

1⁄16" ± 1⁄32"root face

30˚ + 5˚

ASME B16.25

Bevel for wall thickness 3⁄16" up to and including 7⁄8"

ASME B16.25

Bevel for wall thickness over 7⁄8"

API 5L

Bevel for wall thickness unless otherwise specified

7⁄8" max.

1⁄16" ± 1⁄32" root face

371⁄2˚ ± 21⁄2˚

> 7⁄8" max.

10˚± 2.5˚

371⁄2˚ ± 21⁄2˚

1⁄16" ± 1⁄32" root face

0.75" ± 0.06"

Dimensional Tolerances for Steel Pipes to ASTM Specification A530/530M

Pipe Size

Nominal Pipe Size Outside DiameterTolerances Outside Diameter

1⁄8" to 1½", incl. 21.3 mm to 48.3 mm, incl. + 0.4 mm to -0.8 mmOver 1½" to 4", incl. Over 48.3 mm to 114.3 mm, incl. + 0.8 mm to -0.8 mmOver 4" to 8", incl. Over 114.3 mm to 219.1 mm, incl. + 1.6 mm to -0.8 mmOver 8" to 18", incl. Over 219.1 mm to 457.2 mm, incl. + 2.4 mm to -0.8 mmOver 18" to 26", incl. Over 457.2 mm to 660.0 mm, incl. + 3.2 mm to -0.8 mmOver 26" to 34", incl. Over 660.0 mm to 864.0 mm, incl. + 4.0 mm to -0.8 mmOver 34" Over 864.0 mm + 4.8 mm to -0.8 mm

Pipe Size Lengths

Nominal Pipe Size Outside DiameterTolerancesWall thickness

exacts randoms

1⁄8" to 2½", incl., all t/D ratios 21.3 mm to 73.0 mm, incl., all t/D ratios + 20.0% to -12.50%

To be agreed upon between manufacturer and purchaser

3" to 18", incl., t/D ≤ 5% 88.9 mm to 457.0 mm, incl., t/D ≤ 5% + 22.5% to -12.50%3" to 18", incl., t/D > 5% 88.9 mm to 457.0 mm, incl., t/D > 5% + 15.0% to -12.50% + 6.0 mm20" and larger, welded, all t/D ratios 508.0 mm and larger, welded, all t/D ratios + 17.5% to -12.50% - 0.0 mm20" and larger, seamless, t/D ≤ 5% 508.0 mm and larger, seamless, t/D ≤ 5% + 22.5% to -12.50%

20" and larger, seamless, t/D > 5% 508.0 mm and larger, seamless, t/D > 5% + 15.0% to -12.50%

99Pipes

Dimensional Tolerances for Line Pipes to API Specification 5L / ISO 3183 (44rd Edition)

Dimensional Tolerances for Carbon, Alloy and Stainless Steel Pipes to EN Specifications

Pipe SizeDiameter Tolerances

Wall ThicknessTolerances Wall Thickness

Weight (% of theoretical weight)

RandomLengths

Pipe execpt the end Pipe end 1)

Nominal Pipe SizeSpecified Outside Diameter

seamless welded seamless welded seamless welded

Up to 2" Up to 60.3 mm - 0.8 mm / + 0.4 mm- 0.4 mm / + 1.6 mm

≤ 4.0 mm — + 0.6 mm / - 0.5 mm

+ 10% - 3.5 %

S.R.L Min. 2.74 mtr. Max. 6.86 mtr. D.R.L Min. 4.27 mtr. Max. 13.72 mtr.

2" to 6", incl.60.3 mm up to 168.3 mm, incl.

± 0.0075 D4.0 > T < 25.0 mm

—+ 0.150 mm T to - 0.125 mm T

6" to 24", incl.168.3 mm up to 610 mm, incl.

+/- 0.0075 D

± 0.0075 D but maximum of ± 3.2

+/- 0.005 D, but maximum of +/- 1.6 mm

≥ 25.0 mm —

+ 3.7 or + 0.1 T. wichever is the greater- 3.0 or - 0.1 T. whichever is the greater

26" up to 56", incl.660 up to 1422 mm incl.

+/- 0.01 D± 0.005 D but maximum of ± 4.0

+/- 2.0 mm +/- 1.6 mm— ≤ 5.0 mm ± 0.5 mm

—5.0 > T < 15.0 mm

± 0.1 T

Over 56" Over 1 422.0 mm as agreed — ≥ 15.0 mm ± 1.5 mmNotes: 1): For SMLS pipe. the tolerances apply for t ≤ 25.0 mm. the tolerances for thicker pipe shall be agreed.

welded

Nominal Pipe Size (NPS)

Outside Diameter (O.D.)

Outside Diameter Tolerances Tolerances Wall Thickness

Pipe except the ends Pipe ends Wall Thickness

EN 10208-1 EN 10208-2

Up to 24", incl. Up to 610.0 mm, incl. Highest of ± 0.5 mm or ± 0.75 % D Highest of ± 0.5 mm or ±0.5 D, with max of ± 1.6 mm ≤ 4.0 mm + 0.6 mm to -0.5 mm

Over 24" up to 56"

Over 610.0 mm up to 1430.0 mm ± 1.0 % D ± 2.0 mm 4.0 mm < T < 25.0 mm + 15.0 % to -12.5 %

Over 56" Over 1 430.0 mm to be specified by the Purchaser ≥ 25.0 mm Highest of ± 10 % or + 3.75 mm / 3.0 mm

EN 10216-1 EN 10216-2 EN 10216-3 EN 10216-4 Hot formed

Up to 8", incl. Up to 219.1 mm, incl.

Highest of ± 1.0 % or ± 0.5 mm

Highest of ± 12.5 % or ± 0.5 mm

Over 8" Over 219.1 mm± 10.0 % to ± 20.0 % (depends on T/D ratio)

EN 10216-5 Hot formed

Up to 8", incl. Up to 219.1 mm, incl. Highest of ± 1.0 % mm or ± 0.5 mm (Cl. D2)Highest of ± 15.0 % or ± 0.6 mm (Cl. T1)Highest of ± 12.5 % or ± 0.4 mm (Cl. T2)

Over 8" up to 24", incl.

Over 219.1 mm up to 610.0 mm, incl. Highest of ± 1.5 % mm or ± 0.75 mm (Cl. D1)+ 22.5% / - 15%Highest of ± 15.0 % or ± 0.6mm (Cl. T1)Highest of ± 12.5 % or ± 0.4mm (Cl. T2)


Outside Diameter (O.D.)

Outside Diameter Tolerances Tolerances Wall Thickness

Pipe except the ends Pipe ends Wall Thickness

EN 10208-1 EN 10208-2

Up to 24", incl.Over 24"

Up to 610.0 mm, incl.Over 610.0 mm

Highest of ± 0.5 mm or 0.75% D with max. ± 3 mm+/- 0.5 % D, max. +/- 4.0 mm

Highest of ± 0.5 mm or ±0.5 D, with max of ±1.6 mm± 1.6 mm

≤ 10.0 mm10.0 mm < T < 20.0 mm

+ 1.0 mm / -0.5 mm+ 10.0 % / -5.0 %

Over 56" Over 1 430.0 mm to be specified by the Purchaser ≥ 20.0 mm + 2.0 mm / -1.0 mm

EN 10217-1 Up to 8", incl.Over 8"


Highest of ± 1.0 % or ± 0.5 mmLowest of ± 0.75 % or ± 6.0 mm

≤ 5.0 mm5.0 mm < T < 40.0 mm

Highest of ± 10.0 % or ± 0.3 mmLowest of ± 8.0 % or ± 2.0mm

EN 10217-2 Up to 8", incl.Over 8"


Highest of ± 1.0 % or ± 0.5 mm± 0.75 %

≤ 5.0 mm5.0 mm < T < 16.0 mm

Highest of ± 10.0 % or ± 0.3 mm± 8.0 %

EN 10217-5 Over 16" Over 406.4 mm Lowest of ± 0.75 % or ± 6.0 mm≤ 5.0 mm5.0 mm < T < 40.0 mm

Highest of ± 10.0 % or ± 0.3 mmLowest of ± 8.0 % or ± 2.0mm

EN 10217-7Up to 6", incl. Up to 168.3, incl.

Highest of ± 0.75 % or ± 0.3 mm (Cl. D3)Highest of ± 0.5 % or ± 0.1 mm (Cl. D4) Highest of ± 10.0 % or ± 0.2 mm (Cl. T3)

over 6" Over 168.3 mm ± 1.0 % (D4)

seamless

90˚ and 45˚ Elbows ASME B16.9

ASME B16.9

Long Radius 90˚

ASME B16.9

Short Radius 90˚

ASME B16.9

Long Radius 45˚

Dimensions 90° and 45° Elbows, Long and Short Radius

K

A

A K

A

A

B

B

A

Nominal Pipe Size (NPS) in inches

Outside Diameter at Bevel

90° Elbows 45° ElbowsLong Radius Short Radius Long Radius

Center to End A

Back to Face K

Center to End A

Back to Face K

Center to End B

½ 21.3 38 48 16¾ 26.7 38 51 191 33.4 38 56 25 41 221¼ 42.2 48 70 32 52 251½ 48.3 57 83 38 62 292 60.3 76 106 51 81 352½ 73.0 95 132 64 100 443 88.9 114 159 76 121 513½ 101.6 133 184 89 140 574 114.3 152 210 102 159 645 141.3 190 262 127 197 796 168.3 229 313 152 237 958 219.1 305 414 203 313 12710 273.0 381 518 254 391 15912 323.8 457 619 305 467 19014 355.6 533 711 356 533 22216 406.4 610 813 406 610 25418 457.0 686 914 457 686 28620 508.0 762 1 016 508 762 31822 559.0 838 1 118 559 838 34324 610.0 914 1 219 610 914 381All dimensions are in millimeters

We offer a complete range of elbows and fittings, of every

size and pressure, suitable for your business and your in-

dividual demands. We have our own extensive warehouse

of buttwelding fittings up to 24" of high temperature, low

temperature qualities in the complete schedule ranges.

10 Elbows and Fittings

Elbows and Fittings

11Elbows and Fittings

Weights (kg/pce) 90° Elbows, Long and Short Radius (approx.)

Schedule No. austenitic steel

NPS (inches)


S10 S20 S30 STD S40 S60 XS S80 S100 S120 S140 S160 XXS S5S S10S S40S S80S

½ 21.3S.R.L.R. 0.08 0.08 0.10 0.10 0.12 0.15 0.05 0.06 0.08 0.10

¾ 26.7S.R. 0.07 0.07 0.10 0.10 0.15L.R. 0.10 0.10 0.13 0.13 0.17 0.22 0.06 0.08 0.10 0.13

1 33.4S.R. 0.10 0.10 0.12 0.12 0.18L.R. 0.15 0.15 0.19 0.19 0.27 0.34 0.08 0.12 0.15 0.19

1¼ 42.2S.R. 0.17 0.17 0.22 0.22 0.29L.R. 0.26 0.26 0.35 0.35 0.44 0.61 0.12 0.20 0.26 0.35

1½ 48.3S.R. 0.25 0.25 0.32 0.32 0.45L.R. 0.37 0.37 0.49 0.49 0.68 0.90 0.17 0.28 0.37 0.49

2 60.3S.R. 0.43 0.43 0.60 0.60 0.93L.R. 0.65 0.65 0.90 0.90 1.34 1.68 0.29 0.47 0.65 0.90

2½ 73.0S.R. 0.89 0.89 1.19 1.19 1.56L.R. 1.37 1.37 1.79 1.79 2.34 3.20 0.55 0.78 1.37 1.79

3 88.9S.R. 1.35 1.35 1.85 1.85 2.70L.R. 2.04 2.04 2.74 2.74 4.01 5.17 0.81 1.15 2.04 2.74

3½ 101.6S.R. 1.90 1.90 2.60 2.60L.R. 2.80 2.80 3.95 3.95 1.08 1.55 2.80 3.95

4 114.3S.R. 2.60 2.60 3.60 3.60 4.72 5.60L.R. 3.84 3.84 5.40 5.40 7.08 8.94 10.29 1.39 2.00 3.84 5.33

5 141.3S.R. 4.35 4.35 6.10 6.10 8.44 10.30L.R. 6.48 6.48 9.10 9.10 12.61 15.47 18.10 2.82 3.45 6.48 9.24

6 168.3S.R. 6.65 6.65 10.00 10.00 13.61 17.00L.R. 10.00 10.00 15.30 15.30 20.41 25.40 29.94 4.07 4.98 10.00 15.30

8 219.1S.R. 12.25 13.50 13.50 17.74 20.30 20.30 25.40 29.94 37.30L.R. 16.74 18.37 20.30 20.30 26.30 30.50 30.50 38.19 45.36 50.74 55.79 54.43 7.08 9.56 20.30 30.50

10 273.0S.R. 21.23 24.00 24.00 31.80 31.80 40.20 48.08 55.79 72.15L.R. 26.22 31.66 37.00 37.00 48.00 48.00 59.88 71.82 83.46 97.41 107.96 97.41 13.54 16.62 37.00 48.00

12 323.8S.R. 32.74 35.00 39.92 54.89 46.00 66.23 80.29 93.90 119.95L.R. 37.46 48.99 54.00 57.21 82.55 69.00 99.34 120.27 141.07 156.82 180.08 141.07 22.42 25.83 54.00 69.00

14 355.6S.R. 46.00 46.00 55.34 73.94 62.00 92.99 114.15 131.69 165.15L.R. 48.00 59.70 68.00 68.00 79.12 111.13 90.00 139.25 171.23 197.54 222.96 247.66 28.75 34.56

16 406.4S.R. 59.00 59.00 80.00 107.05 80.00 136.08 164.60 192.00 244.80L.R. 63.00 78.20 90.00 90.00 120.00 161.03 120.00 204.12 246.85 288.05 334.83 366.96 39.80 45.29

18 457.0S.R. 92.99 76.00 114.48 154.22 100.00 191.42 233.75 274.15 346.40L.R. 80.00 99.20 139.71 113.00 167.80 231.34 150.00 287.58 350.64 411.21 461.77 519.60 50.42 57.36

20 508.0S.R. 125.00 95.00 153.32 207.30 125.00 259.91 319.15 369.70 478.50L.R. 99.00 143.00 190.00 143.00 219.43 311.17 190.00 390.55 478.81 554.28 638.27 717.50 70.88 82.08

22 559.0S.R.L.R. 120.00 175.00 230.00 175.00 406.00 230.00 516.35 623.36 727.94 829.61 939.80 85.83 99.37

24 610.0S.R. 213.19 140.00 255.83 355.17 179.00 443.17 550.15 642.75 834.75L.R. 142.00 206.00 318.43 206.00 366.51 533.43 282.00 666.79 825.23 964.10 1101.62 1251.55 118.34 142.00

For weight of above specified products calculate as follows: S.R. 90° Elbows: 2/3 * 90° L.R. ElbowsL.R. 45° Elbows: 1/2 * 90° L.R. ElbowsL.R. 180° Elbows: 2 * 90° L.R. Elbows. S.R. 180° Elbows: 1 1⁄3 * 90° L.R. Elbows


Dimensions 180° Returns, Long and Short Radius

180 ˚ Returns ASME B16.9

ASME B16.9

Long Radius

ASME B16.9

Short Radius

K

O

A AO

K

Nominal Pipe Size (NPS) in inches


180° Return Bends

Long Radius Short Radius

Center to Center O

Back to Face K

Center to Center O

Back to Face K

½ 21.3 76 48

¾ 26.7 76 511 33.4 76 56 51 411¼ 42.2 95 70 64 521½ 48.3 114 83 76 622 60.3 152 106 102 812½ 73.0 190 132 127 1003 88.9 229 159 152 1213½ 101.6 267 184 178 1404 114.3 305 210 203 1595 141.3 381 262 254 1976 168.3 457 313 305 2378 219.1 610 414 406 31310 273.0 762 518 508 39112 323.8 914 619 610 46714 355.6 1 067 711 711 53316 406.4 1 219 813 813 61018 457.0 1 372 914 914 68620 508.0 1 524 1 016 1 016 76222 559.0 1 676 1 118 1 118 83824 610.0 1 829 1 219 1 219 914All dimensions are in millimeters


Tees Straight and Reducing ASME B16.9

ASME B16.9

Dimensions and Weights Tees, Straight and Reducing

M

C C



Center-to-End Weights in kg. (approx.)

Run Outlet Run OutletRun

COutlet

MS20 S30 STD S40 S60 XS S80 S120 S160 XXS

½½

21.3 21.3 25 25 0.16 0.16 0.20 0.20 0.23 0.25

3⁄8 17.3 25 25 0.11 0.11 0.13 0.13 0.20 0.22¼ 13.7 25 25 0.11 0.11 0.13 0.13 0.20 0.22

¾¾

26.7 26.7 29 29 0.23 0.23 0.27 0.27 0.28 0.28

½ 21.3 29 29 0.23 0.23 0.23 0.23 0.27 0.273⁄8 17.3 29 29 0.23 0.23 0.23 0.23 0.27 0.27

11

33.4 33.4 38 38 0.28 0.28 0.35 0.35 0.45 0.58

¾ 26.7 38 38 0.26 0.26 0.33 0.33 0.42 0.53½ 21.3 38 38 0.25 0.25 0.32 0.32 0.40 0.51

1¼

1¼

42.2

42.2 48 48 0.53 0.53 0.65 0.65 0.77 1.051 33.4 48 48 0.48 0.48 0.60 0.60 0.72 0.97¾ 26.7 48 48 0.47 0.47 0.59 0.59 0.71 0.94½ 21.3 48 48 0.46 0.46 0.57 0.57 0.69 0.92

1½

1½

48.3

48.3 57 57 0.77 0.77 0.96 0.96 1.22 1.561¼ 42.2 57 57 0.71 0.71 0.91 0.91 1.14 1.481 33.4 57 57 0.70 0.70 0.87 0.87 1.11 1.42¾ 26.7 57 57 0.69 0.69 0.86 0.86 1.08 1.37½ 21.3 57 57 0.68 0.68 0.84 0.84 1.08 1.34

2

2

60.3

60.3 64 64 1.50 1.50 2.15 2.15 2.27 2.691½ 48.3 64 60 1.50 1.50 2.15 2.15 2.06 2.491¼ 42.2 64 57 1.50 1.50 2.15 2.15 2.03 2.471 33.4 64 51 1.50 1.50 2.15 2.15 1.99 2.41¾ 26.7 64 44 1.50 1.50 2.15 2.15 1.97 2.30

2½

2½

73.0

73.0 76 76 2.68 2.68 3.07 3.07 3.44 4.542 60.3 76 70 2.68 2.68 3.07 3.07 3.15 4.171½ 48.3 76 67 2.68 2.68 3.07 3.07 3.05 4.081¼ 42.2 76 64 2.68 2.68 3.07 3.07 3.02 4.051 33.4 76 57 2.68 2.68 3.07 3.07 2.98 3.89

3

3

88.9

88.9 86 86 3.81 3.81 4.50 4.50 6.26 7.622½ 73.0 86 83 3.81 3.81 4.50 4.50 5.71 7.122 60.3 86 76 3.81 3.81 4.50 4.50 5.62 6.941½ 48.3 86 73 3.81 3.81 4.50 4.50 5.58 6.891¼ 42.2 86 70 3.81 3.81 4.50 4.50 5.53 6.85

3½

3½

101.6

101.6 95 95 4.93 4.93 6.60 6.603 88.9 95 92 4.93 4.93 6.60 6.602½ 73.0 95 89 4.93 4.93 6.60 6.602 60.3 95 83 4.93 4.93 6.60 6.601½ 48.3 95 79 4.93 4.93 6.60 6.60

4

4

114.3

114.3 105 105 5.99 5.99 8.44 8.44 9.50 15.56 15.513½ 101.6 105 102 5.99 5.99 8.44 8.443 88.9 105 98 5.99 5.99 8.44 8.44 12.93 14.502½ 73.0 105 95 5.99 5.99 8.44 8.44 12.93 14.502 60.3 105 89 5.99 5.99 8.44 8.44 12.93 14.501½ 48.3 105 86 5.99 5.99 8.44 8.44 12.93 14.50

5

5

141.3

141.3 124 124 9.93 9.93 12.93 12.93 17.50 25.00 29.904 114.3 124 117 9.93 9.93 12.93 12.93 17.50 23.00 28.803½ 101.6 124 114 9.933 88.9 124 111 9.93 9.93 12.93 12.93 23.00 27.702½ 73.0 124 108 9.93 9.93 12.93 12.93 23.00 27.502 60.3 124 105 9.93 9.93 12.93 12.93 23.00 27.20

6

6

168.3

168.3 143 143 16.46 16.46 19.28 19.28 24.00 39.50 47.505 141.3 143 137 16.46 16.46 19.28 19.28 24.00 32.70 47.504 114.3 143 130 16.46 16.46 19.28 19.28 24.00 32.70 37.253½ 101.6 143 1273 88.9 143 124 16.46 16.46 19.28 19.28 30.85 37.252½ 73.0 143 121 16.46 16.46 19.28 19.28 30.85 37.25

8

8

219.1

219.1 178 178 24.49 25.85 27.67 27.67 31.75 34.47 34.47 52.16 70.35 68.956 168.3 178 168 27.67 27.67 34.47 34.47 52.16 52.16 51.715 141.3 178 162 27.67 27.67 34.47 34.47 44.00 52.16 51.004 114.3 178 156 27.67 27.67 34.47 34.47 44.00 49.44 50.703½ 101.6 178 152 27.67 27.67 34.47 34.47

10

10

273.0

273.0 216 216 33.11 36.74 41.27 41.27 58.51 58.51 73.03 97.52 127.00 97.528 219.1 216 203 31.75 35.38 39.92 39.92 52.62 52.62 71.21 89.36 109.32 89.366 168.3 216 194 39.92 39.92 52.62 54.43 81.65 101.15 81.655 141.3 216 191 39.92 39.92 52.62 52.62 71.21 89.36 71.214 114.3 216 184 39.92 39.92 52.62 52.62 71.21 85.28 71.21


Reducers Concentric and Eccentric ASME B16.9

Dimensions and Weights Reducers Concentric and Eccentric

H H

DimensionsWeights in kg. (approx.)

Nominal Pipe Size (inches) Outside Diameter at Bevel End-to-End

Large End Small End Large End Small End S20 S30 STD S40 S60 XS S80 S120 S160 XXS

¾½

26.7 21.3

38 0.06 0.06 0.08 0.08 0.11 0.143⁄8 17.3

1¾

33.4 26.7

51 0.13 0.13 0.17 0.17 0.22 0.28½ 21.3

1¼

1

42.2

33.4

51 0.17 0.17 0.23 0.23 0.29 0.40¾ 26.7

½ 21.3

1½

1¼

48.3

42.2

64 0.26 0.26 0.35 0.35 0.46 0.611 33.4

¾ 26.7

½ 21.3



Center-to-End Weights in kg. (approx.)

Run Outlet Run OutletRun

COutlet

M S20 S30 STD S40 S60 XS S80 S120 S160 XXS

12

12

323.8

323.8 254 254 54.43 61.69 65.00 66.68 102.51 84.90 111.13 160.12 194.59 160.1210 273.0 254 241 54.43 61.69 65.00 66.68 102.51 84.90 102.51 149.23 171.00 149.238 219.1 254 229 52.62 59.87 63.00 64.41 82.10 82.00 81.65 133.33 154.68 133.336 168.3 254 219 63.00 64.41 82.00 81.65 111.13 144.24 111.135 141.3 254 216 63.00 64.41 82.00 81.65 102.51 144.24 102.51

14

14

355.6

355.6 279 279 95.26 102.51 102.51 114.30 141.07 127.12 167.38 240.00 300.0012 323.8 279 270 95.26 102.51 102.51 114.30 141.07 127.12 142.88 235.00 300.0010 273.0 279 257 91.17 98.43 98.43 135.62 135.62 127.12 140.62 230.00 285.008 219.1 279 248 91.17 98.43 98.43 135.62 135.62 122.00 121.56 220.00 270.006 168.3 279 238 98.43 135.62 122.00 121.56 205.00 270.00

16

16

406.4

406.4 305 305 100.70 109.77 109.77 167.83 207.75 167.83 248.57 330.00 425.0014 355.6 305 305 100.70 109.77 109.77 167.83 207.75 167.83 199.58 320.00 410.0012 323.8 305 295 100.70 109.77 109.77 162.84 180.98 162.84 180.98 310.00 385.0010 273.0 305 283 97.52 106.59 106.59 160.57 163.29 160.57 163.29 295.00 360.008 219.1 305 273 97.52 106.59 106.59 160.57 160.57 160.57 163.29 280.00 295.006 168.3 305 264 106.59 160.57 160.57 163.29 275.00 290.00

18

18

457.0

457.0 343 343 127.00 164.00 135.00 238.14 277.60 190.00 322.06 450.00 590.0016 406.4 343 330 127.00 164.00 135.00 238.14 256.28 165.00 278.96 440.00 550.0014 355.6 343 330 127.00 164.00 135.00 193.68 212.28 165.00 258.09 420.00 520.0012 323.8 343 321 127.00 154.00 135.00 193.68 212.28 165.00 234.06 400.00 500.0010 273.0 343 308 123.00 140.00 129.00 149.69 187.79 158.00 222.98 375.00 475.008 219.1 343 298 123.00 140.00 129.00 149.69 187.79 158.00 203.67 370.00 465.00

20

20

508.0

508.0 381 381 228.61 264.45 228.61 320.24 378.30 264.45 463.12 590.00 790.0018 457.0 381 368 228.61 264.45 228.61 264.90 351.08 264.45 409.60 570.00 770.0016 406.4 381 356 228.61 228.31 228.61 229.52 323.42 228.31 345.71 550.00 750.0014 355.6 381 356 223.62 223.62 223.62 224.08 292.57 223.62 323.42 530.00 725.0012 323.8 381 346 223.62 223.62 223.62 224.08 292.57 223.62 323.42 500.00 700.0010 273.0 381 333 218.63 218.63 218.63 220.00 285.77 218.63 292.57 475.00 680.008 219.1 381 324 218.63 218.63 218.63 220.00 285.77 218.63 292.57 465.00 675.00

22

22

559.0

559.0 419 419 309.39 380.34 309.39 478.60 555.89 370.04 656.82 908.38 1 128.7520 508.0 419 406 269.41 319.15 269.41 352.06 481.28 370.04 551.99 876.13 1 096.5018 457.0 419 394 269.41 299.72 269.41 333.04 427.40 310.84 478.39 854.63 1 053.5016 406.4 419 381 243.56 255.02 243.56 286.48 386.68 292.20 443.49 827.75 1 023.9414 355.6 419 381 243.56 255.02 243.56 286.48 386.68 292.20 443.49 806.25 989.0012 323.8 419 371 240.88 252.34 240.88 284.28 363.28 289.51 406.18 765.94 951.3810 273.0 419 359 220.89 252.34 220.89 284.28 363.28 289.51 406.18 752.50 935.25

24

24

610.0

610.0 432 432 347.00 443.16 347.00 570.17 655.91 424.00 758.87 1 100.00 1 310.0022 559.0 432 432 272.61 329.31 272.61 390.09 544.32 424.00 617.35 1 060.00 1 270.0020 508.0 432 432 272.61 329.31 272.61 390.09 471.74 350.00 544.32 1 040.00 1 210.0018 457.0 432 419 229.52 250.84 229.52 308.90 426.84 320.00 501.68 1 010.00 1 180.0016 406.4 432 406 229.52 250.84 229.52 308.90 426.84 320.00 501.68 1 000.00 1 140.0014 355.6 432 406 229.52 250.84 229.52 308.90 390.10 320.00 463.12 950.00 1 090.0012 323.8 432 397 192.32 250.84 192.32 308.90 390.10 320.00 463.12 935.00 1 065.0010 273.0 432 384 192.32 250.84 192.32 308.90 390.10 320.00 463.12 920.00 1 045.00

All dimensions are in millimeters


DimensionsWeights in kg. (approx.)

Nominal Pipe Size (inches) Outside Diameter at Bevel End-to-End

Large End Small End Large End Small End S20 S30 STD S40 S60 XS S80 S120 S160 XXS

2

1½

60.3

48.3

76 0.41 0.41 0.57 0.57 0.84 1.021¼ 42.2

1 33.4

¾ 26.7

2½

2

73.0

60.3

89 0.77 0.77 1.02 1.02 1.33 1.811½ 48.3

1¼ 42.2

1 33.4

3

2½

88.9

73.0

89 1.00 1.00 1.36 1.36 1.90 2.462 60.3

1½ 48.3

1¼ 42.2

3½

3

101.6

88.9

102 1.38 1.38 1.90 1.90

2½ 73.0

2 60.3

1½ 48.3

1¼ 42.2

4

3½

114.3

101.6

102 1.64 1.64 2.28 2.28 2.89 3.42 4.19

3 88.9

2½ 73.0

2 60.3

1½ 48.3

5

4

141.3

114.3

127 2.76 2.76 3.93 3.93 5.12 6.24 7.29

3½ 101.6

3 88.9

2½ 73.0

2 60.3

6

5

168.3

141.3

140 3.96 3.96 5.96 5.96 7.59 9.46 11.09

4 114.3

3½ 101.6

3 88.9

2½ 73.0

8

6

219.1

168.3

152 5.06 5.60 6.47 6.47 8.07 9.83 9.83 13.75 16.91 16.405 141.3

4 114.3

3½ 101.6

10

8

273.0

219.1

178 7.44 9.08 10.74 10.74 14.52 14.52 17.09 23.68 30.67 27.626 168.3

5 141.3

4 114.3

12

10

323.8

273.0

203 10.10 13.24 15.00 16.19 22.12 19.78 26.81 37.95 48.47 37.958 219.1

6 168.3

5 141.3

14

12

355.6

323.8

330 22.41 26.84 26.84 31.20 41.81 35.44 52.17 74.13 92.9610 273.0

8 219.1

6 168.3

16

14

406.4

355.6

356 27.71 33.20 33.20 43.89 57.00 43.89 72.46 102.04 130.0612 323.8

10 273.0

8 219.1

18

16

457.0

406.4

381 33.42 46.63 40.07 59.36 78.39 53.02 96.98 138.52 175.0214 355.6

12 323.8

10 273.0

20

18

508.0

457.0

508 59.51 78.80 59.51 93.18 125.90 78.80 158.07 224.28 286.9216 406.4

14 355.6

12 323.8

22

20

559.0

508.0

508 65.60 86.91 65.60 149.48 86.91 189.91 267.73 341.5118 457.0

16 406.4

14 355.4

24

22

610.0

559.0

508 71.69 106.50 71.69 129.75 180.47 95.03 224.58 325.14 410.5820 508.0

18 457.0

16 406.4


Nominal Pipe Size (NPS)Outside Diameter at Bevel

Long Pattern Length, A Short Pattern Length, A Radius of Fillet, R Diameter of Lap, Cmax. min.

½ 22.8 20.5 76 51 3 35¾ 28.1 25.9 76 51 3 431 35.0 32.6 102 51 3 511¼ 43.6 41.4 102 51 5 641½ 49.9 47.5 102 51 6 732 62.4 59.5 152 64 8 922½ 75.3 72.2 152 64 8 1053 91.3 88.1 152 64 10 1273½ 104.0 100.8 152 76 10 1404 116.7 113.5 152 76 11 1575 144.3 140.5 203 76 11 1866 171.3 167.5 203 89 13 2168 222.1 218.3 203 102 13 27010 277.2 272.3 254 127 13 32412 328.0 323.1 254 152 13 38114 359.9 354.8 305 152 13 41316 411.0 405.6 305 152 13 47018 462.0 456.0 305 152 13 53320 514.0 507.0 305 152 13 58422 565.0 558.0 305 152 13 64124 616.0 609.0 305 152 13 692All dimensions are in millimeters


Lap Joint Stub Ends ASME B16.9

Dimensions Lap Joint Stub Ends

Dimensions and Weights Caps

Caps ASME B16.9

EC

A

R



Dimensions of caps Weights in kg. (approx.)

Length E 1) Limiting Wall Thickness

Length E1 2) S20 S30 STD S40 S60 XS S80 S120 S160 XXS

½ 21.3 25 4.57 25 0.03 0.03 0.04 0.04 0.06 0.10¾ 26.7 25 3.81 25 0.06 0.06 0.08 0.08 0.11 0.151 33.4 38 4.57 38 0.10 0.10 0.13 0.13 0.16 0.201¼ 42.2 38 4.83 38 0.14 0.14 0.18 0.18 0.22 0.291½ 48.3 38 5.08 38 0.17 0.17 0.22 0.22 0.28 0.362 60.3 38 5.59 44 0.23 0.23 0.31 0.31 0.51 0.602½ 73.0 38 7.11 51 0.37 0.37 0.47 0.47 0.80 0.993 88.9 51 7.62 64 0.64 0.64 0.85 0.85 1.43 1.793½ 101.6 64 8.13 76 0.97 0.97 1.30 1.304 114.3 64 8.64 76 1.15 1.15 1.57 1.57 2.32 2.74 3.175 141.3 76 9.65 89 1.90 1.90 2.65 2.65 3.90 4.67 5.356 168.3 89 10.92 102 2.92 2.92 4.28 4.28 6.03 7.39 8.488 219.1 102 12.70 127 3.95 4.37 5.08 5.08 6.35 7.57 7.57 12.65 15.24 15.1010 273.0 127 12.70 152 6.21 7.62 9.07 9.07 12.02 12.02 16.56 22.41 28.39 27.2012 323.8 152 12.70 178 8.93 11.79 14.00 14.38 22.36 18.00 26.89 36.79 45.36 39.8014 355.6 165 12.70 191 13.38 16.06 16.06 18.42 27.67 23.00 34.70 58.91 67.3016 406.4 178 12.70 203 16.78 20.32 20.32 26.22 38.10 26.22 47.63 75.60 89.1618 457.0 203 12.70 229 21.64 30.30 29.00 41.73 54.88 32.00 67.59 88.00 93.0020 508.0 229 12.70 254 32.20 42.63 32.20 54.88 73.48 42.63 91.17 143.60 153.0022 559.0 254 12.70 254 39.30 52.20 39.30 72.40 96.90 52.20 120.80 175.40 198.5024 610.0 267 12.70 305 46.27 66.68 46.27 92.90 127.91 69.00 155.13 219.65 250.00All dimensions are in millimeters Notes : 1) Length E applies for thickness not exceeding that given in column ”Limiting Wall Thickness for Length, E.“ 2) Length E1 applies for thickness greater than that given in column ”Limiting Wall Thickness“ for NPS 24 and smaller. For NPS 26 and larger, length E1 shall be by agreement between the manufacturer and purchaser.

17

Lap Joint Stub Ends ASME B16.9 Dimensional Tolerances for Buttwelding Fittings to ASME Specification B16.9

Lap Joint Stub Ends

All Fittings Center-to-End Dimensions Overall Length 180 Deg Returns



Outside Diameter at BevelD

Inside Diameter at End

90-deg and 45-deg Long and Short Radius Elbows and Tees A, B, C, M

3D Radius ElbowsA, B

Reducers and Lap Joint Stub EndsA, H

CapsE

Center-to-End DimensionO

Back-to-Face DimensionK

Alignment of Ends

½" to 2½" 21.3 mm to 73.0 mm + 1.6 to -0.8 ± 0.8 mm ± 2 mm ± 3 mm ± 2 mm ± 3 mm ± 6 mm ± 6 mm ± 1 mm3" to 3½" 88.9 mm to 101.6 mm ± 1.6 ± 1.6 mm ± 2 mm ± 3 mm ± 2 mm ± 3 mm ± 6 mm ± 6 mm ± 1 mm4" 114.3 mm ± 1.6 ± 1.6 mm ± 2 mm ± 3 mm ± 2 mm ± 3 mm ± 6 mm ± 6 mm ± 1 mm5" to 8" 141.3 mm to 219.1 mm +2.4 to -1.6 ± 1.6 mm ± 2 mm ± 3 mm ± 2 mm ± 6 mm ± 6 mm ± 6 mm ± 1 mm10" to 18" 273.0 mm to 457.0 mm +4.0 to -3.2 ± 3.2 mm ± 2 mm ± 3 mm ± 2 mm ± 6 mm ± 10 mm ± 6 mm ± 2 mm20" to 24" 508.0 mm to 610.0 mm +6.4 to -4.8 ± 4.8 mm ± 2 mm ± 3 mm ± 2 mm ± 6 mm ± 10 mm ± 6 mm ± 2 mm26" to 30" 660.0 mm to 762.0 mm +6.4 to -4.8 ± 4.8 mm ± 3 mm ± 6 mm ± 5 mm ± 10 mm … … …32" to 48" 813.0 mm to 1 219.0 mm +6.4 to -4.8 ± 4.8 mm ± 5 mm ± 6 mm ± 5 mm ± 10 mm … … …

Nominal Pipe Size (NPS) Outside Diameter at Bevel Outside Diameter of Lap, C Fillet Radius of Lap, R Lap Thickness½" to 2½" 21.3 mm to 73.0 mm +0 mm to - 1 mm +0 mm to - 1 mm + 1.6 mm to - 0 mm3" to 3½" 88.9 mm to 101.6 mm +0 mm to - 1 mm +0 mm to - 1 mm + 1.6 mm to - 0 mm4" 114.3 mm +0 mm to - 1 mm +0 mm to - 2 mm + 1.6 mm to - 0 mm5" to 8" 141.3 mm to 219.1 mm +0 mm to - 1 mm +0 mm to - 2 mm + 1.6 mm to - 0 mm10" to 18" 273.0 mm to 457.0 mm +0 mm to - 2 mm +0 mm to - 2 mm +3.2 mm to - 0 mm20" to 24" 508.0 mm to 610.0 mm +0 mm to - 2 mm +0 mm to - 2 mm +3.2 mm to - 0 mm26" to 30" 660.0 mm to 762.0 mm … … …32" to 48" 813.0 mm to 1 219.0 mm … … …

Nominal Pipe Size (NPS)Outside Diameter at Bevel

Back-to-Face Dimensions Overall Length Ovality ElbowsElbows

ReducersH

TeesM, C

CapsE

Outside Diameter

Ends Body90°K

180°K

≤ 4" ≤ 114.3 mm ± 2.0 mm ± 7.0 mm ± 2.0 mm ± 2.0 mm ± 4.0 mm

max. 4.0 %4" < D ≤ 8" 114.3 < D ≤ 219.1 mm ± 2.0 mm ± 7.0 mm ± 2.0 mm ± 2.0 mm ± 7.0 mm ≤ 273.0 mm

incl. in Diameter Tolerance

8" < D ≤ 16" 219.1 < D ≤ 406.4 mm ± 3.0 mm ± 7.0 mm ± 3.0 mm ± 3.0 mm ± 7.0 mm≤ 610.0 mm max. 2.0 %

16" < D ≤ 30" 406.4 < D ≤ 762.0 mm ± 3.0 mm ± 10.0 mm ± 3.0 mm ± 3.0 mm ± 7.0 mm30" < D 762.0 < D ± 5.0 mm ± 12.0 mm ± 5.0 mm ± 5.0 mm ± 10.0 mm > 610.0 mm max. 1.0 %

Dimensional Tolerances for Buttwelding Fittings to EN Specification 10253-2

Dimensional Tolerances for Buttwelding Fittings to EN Specification 10253-4

seamless/ welded Nominal Pipe Size (NPS)Outside Diamater at Bevel (O.D.)

Wall Thickness Wall Thickness Tolerances Inside Diameter Tolerances 1)

seamless/ welded ≤ 24" ≤ 610.0 mm- 12.5 % to + 20.0 %

Highest of ± 1.0 % or ± 0.5 mm, max. ± 5.0 mm

seamless > 24" > 610.0 mm

welded > 24" > 610.0 mm≤ 10.0 mm - 0.35 mm to + 20.0 %> 10.0 mm - 0.50 mm to + 20.0 %

Notes: 1) Tolerances apply to inside diameter, optional to outside diameter

Nominal Pipe Size (NPS) Outside Diameter at Bevel

DimensionsOvality Elbows

ElbowsReducersH

TeesM, C

CapsE90°

K180°K

Ends Body

≤ 4" ≤ 114.3 mm

not men. in EN 10253-4

± 7.0 mm ± 2.0 mm ± 2.0 mm ± 4.0 mm

incl. in Diameter Tolerance

max. 4.0 %4" < D ≤ 8" 114.3 < D ≤ 219.1 mm ± 7.0 mm ± 2.0 mm ± 2.0 mm ± 7.0 mm8" < D ≤ 16" 219.1 < D ≤ 406.4 mm ± 7.0 mm ± 5.0 mm ± 5.0 mm ± 7.0 mm16" < D ≤ 30" 406.4 < D ≤ 762.0 mm ± 10.0 mm ± 5.0 mm ± 5.0 mm ± 7.0 mm30" < D ≤ 48" 762.0 < D ≤ 1219.0 mm ± 10.0 mm ± 10.0 mm ± 10.0 mm ± 10.0 mm

Nominal Pipe Size (NPS)Outside Diamater at Bevel (O.D.)

Wall ThicknessWall Thickness Tolerances

Outside Diameter Tolerances

≤ 24" ≤ 610.0 mm all - 12.5 % to + 15.0 %Highest of ± 1.0 % mm or ± 0.5 mm (Cl. D2)Highest of ± 0.75 % or ± 0.3 mm (Cl. D3)

> 24" > 610.0 mm≤ 10.0 mm > 10.0 mm

- 0.35 mm to + 15.0 %- 0.50 mm to + 15.0 %

Highest of ± 0.5 % or ± 0.1 mm (Cl. D4)

Elbows and Fittings

X

R

C

O

Bolt circle diam.

Diam. of bolt holeB2

2 mm

Y2

Welding Neck

Blind

Slip-On

Socket-Welding

Lap Joint

Threaded

Welding Neck, Slip-On, Lap Joint, Blind, Socket-Weld, Threaded

150 and 300 Lbs Flanges ASME B16.5

XA

RBolt circle diam.

O

1⁄16"

Y1

C

Diam. of hole

371⁄2°

2 mm

B1

2 mm

C

Diam. of bolt hole

Bolt circle diam.R

O

2 mm

Y2CD

XB2

B1

Bolt circle diam.R

O

Diam. of bolt hole

Diam. of bolt hole

C Y3

O

Bolt circle diam.Radius

XB3

O

Bolt circle diam.R

XScrewed Diam. of bolt hole

2 mm

Y2CThreaded

Length

We are one of the leading suppliers of flanges within the

ASME range. Due to our selected suppliers we ensure

the supply of high quality flanges to meet our customers’

requirements.

18 Flanges

Flanges

19

150 Lbs Flanges

300 Lbs Flanges

Nominal Pipe Size, NPS

Outside Diame-ter of Flange

Min. Thick-ness of Flange

Raised Face large Male and Large Tongue

Diameter of Hub

Lenth Through Hub Bore Approx. Weight (kg) Drilling

Welding Neck

Threa-ded/ Slip-On/ Socket Welding

Lap joint

Welding Neck/ Socket Welding

Min. Slip-On/ Socket Welding

Min. Lap Joint

Depth of Socket

WeldingNeck

Slip-OnThrea-ded/SocketWelding

LapJoint

BlindNumber of Bolts

Diamter of Bolt Holes

Bolt Circle Diame-ter

O C R X Y1 Y2 Y3 B1 B2 B3 D½ 90 9.6 34.9 30 46 14 16 15.8 22.2 22.9 10 0.9 0.5 0.5 0.5 4 15.9 60.3¾ 100 11.2 42.9 38 51 14 16 20.9 27.7 28.2 11 0.9 0.9 0.9 0.9 4 15.9 69.91 110 12.7 50.8 49 54 16 17 26.6 34.5 34.9 13 1.4 0.9 0.9 0.9 4 15.9 79.41¼ 115 14.3 63.5 59 56 19 21 35.1 43.2 43.7 14 1.4 1.4 1.4 1.4 4 15.9 88.91½ 125 15.9 73.0 65 60 21 22 40.9 49.5 50.0 16 1.8 1.4 1.4 1.8 4 15.9 98.42 150 17.5 92.1 78 62 24 25 52.5 61.9 62.5 17 2.7 2.3 2.3 2.3 4 19.1 120.72½ 180 20.7 104.8 90 68 27 29 62.7 74.6 75.4 19 3.6 3.2 3.2 3.2 4 19.1 139.73 190 22.3 127.0 108 68 29 30 77.9 90.7 91.4 21 4.5 3.6 3.6 4.1 4 19.1 152.43½ 215 22.3 139.7 122 70 30 32 90.1 103.4 104.1 … 5.4 5.0 5.0 5.9 8 19.1 177.84 230 22.3 157.2 135 75 32 33 102.3 116.1 116.8 … 6.8 5.9 5.9 7.7 8 19.1 190.55 255 22.3 185.7 164 87 35 36 128.2 143.8 144.4 … 8.6 6.8 6.8 9.1 8 22.2 215.96 280 23.9 215.9 192 87 38 40 154.1 170.7 171.4 … 10.9 8.6 8.6 11.8 8 22.2 241.38 345 27.0 269.9 246 100 43 44 202.7 221.5 222.2 … 17.7 13.6 13.6 20.4 8 22.2 298.510 405 28.6 323.8 305 100 48 49 254.6 276.2 277.4 … 23.6 19.5 19.5 31.8 12 25.4 362.012 485 30.2 381.0 365 113 54 56 304.8 327.0 328.2 … 36.3 29.0 29.0 49.9 12 25.4 431.814 535 33.4 412.8 400 125 56 79

To b

e

spec

ified

by

the

Pur

chas

er 359.2 360.2 … 50.0 41.0 47.6 63.5 12 28.6 476.316 595 35.0 469.9 457 125 62 87 410.5 411.2 … 64.0 44.5 63.5 81.6 16 28.6 539.818 635 38.1 533.4 505 138 67 97 461.8 462.3 … 68.0 59.0 72.6 99.8 16 31.8 577.920 700 41.3 584.2 559 143 71 103 513.1 514.4 … 81.6 75.0 88.5 129.0 20 31.8 635.024 815 46.1 692.2 663 151 81 111 616.0 616.0 … 118.0 99.8 125.0 195.0 20 34.9 749.3All dimensions are in millimeters

½ 95 12.7 34.9 38 51 21 22 15.8 22.2 22.9 10 0.9 0.9 0.9 0.9 4 15.9 66.7¾ 115 14.3 42.9 48 56 24 25 20.9 27.7 28.2 11 1.4 1.4 1.4 1.4 4 19.1 82.61 125 15.9 50.8 54 60 25 27 26.6 34.5 34.9 13 1.8 1.4 1.4 1.4 4 19.1 88.91¼ 135 17.5 63.5 64 64 25 27 35.1 43.2 43.7 14 2.3 1.8 1.8 1.8 4 19.1 98.41½ 155 19.1 73.0 70 67 29 30 40.9 49.5 50.0 16 3.2 2.7 2.7 2.7 4 22.2 114.32 165 20.7 92.1 84 68 32 33 52.5 61.9 62.5 17 4.1 3.2 3.2 3.6 8 19.1 127.02½ 190 23.9 104.8 100 75 37 38 62.7 74.6 75.4 19 5.4 4.5 4.5 5.4 8 22.2 149.23 210 27.0 127.0 117 78 41 43 77.9 90.7 91.4 21 6.8 5.9 5.9 7.3 8 22.2 168.33½ 230 28.6 139.7 133 79 43 44 90.1 103.4 104.1 … 8.2 7.7 7.7 9.5 8 22.2 184.24 255 30.2 157.2 146 84 46 48 102.3 116.1 116.8 … 11.3 10.0 10.0 12.2 8 22.2 200.05 280 33.4 185.7 178 97 49 51 128.2 143.8 144.4 … 14.5 12.7 12.7 15.9 8 22.2 235.06 320 35.0 215.9 206 97 51 52 154.1 170.7 171.4 … 19.0 17.7 17.7 22.7 12 22.2 269.98 380 39.7 269.9 260 110 60 62 202.7 221.5 222.2 … 30.4 26.3 26.3 36.7 12 25.4 330.210 445 46.1 323.8 321 116 65 95 254.6 276.2 277.4 … 41.3 36.7 41.3 56.7 16 28.6 387.412 520 49.3 381.0 375 129 71 102 304.8 327.0 328.2 … 63.5 52.2 63.5 83.9 16 31.8 450.814 585 52.4 412.8 425 141 75 111

To b

e sp

e-ci

fied

by

the

Pur

chas

er

359.2 360.2 … 81.6 74.8 86.2 113.0 20 31.8 514.416 650 55.6 469.9 483 144 81 121 410.5 411.2 … 113.0 86.2 113.0 134.0 20 34.9 571.518 710 58.8 533.4 533 157 87 130 461.8 462.3 … 145.0 113.0 134.0 179.0 24 34.9 628.620 775 62.0 584.2 587 160 94 140 513.1 514.4 … 181.0 143.0 168.0 229.0 24 34.9 685.824 915 68.3 692.2 702 167 105 152 616.0 616.0 … 263.0 215.0 249.0 358.0 24 41.3 812.8All dimensions are in millimeters

Flanges


Outside Diameter of Flange


Raised Face large Male and Large Tongue

Diameter of Hub


Welding Neck


Lap Joint



Min. Lap Joint

Depth of Socket

Wel-ding Neck


Lap Joint




O C R X Y1 Y2 Y3 B1 B2 B3 D

½" 95 14.3 34.9 38 52 22 22

To b

e sp

ecifi

ed b

y p

urch

aser

22.2 22.9 10 0.9 0.9 0.9 0.9 4 15.9 66.7

¾" 115 15.9 42.9 48 57 25 25 27.7 28.2 11 1.8 1.4 1.4 1.4 4 19.1 82.61" 125 17.5 50.8 54 62 27 27 34.5 34.9 13 1.8 1.8 1.8 1.8 4 19.1 88.91¼" 135 20.7 63.5 64 67 29 29 43.2 43.7 14 2.7 2.3 2.3 2.3 4 19.1 98.41½" 155 22.3 73.0 70 70 32 32 49.5 50.0 16 3.6 3.2 3.2 3.6 4 22.2 114.32" 165 25.4 92.1 84 73 37 37 61.9 62.5 17 5.4 4.1 4.1 4.5 8 19.1 127.02½" 190 28.6 104.8 100 79 41 41 74.6 75.4 19 8.2 5.9 5.4 6.8 8 22.2 149.23" 210 31.8 127.0 117 83 46 46 90.7 91.4 21 10.4 7.3 6.8 9.1 8 22.2 168.33½" 230 35.0 139.7 133 86 49 49 103.4 104.1 … 11.8 9.5 9.1 13.2 8 25.4 184.24" 275 38.1 157.2 152 102 54 54 116.1 116.8 … 19.0 16.8 16.3 18.6 8 25.4 215.95" 330 44.5 185.7 189 114 60 60 143.8 144.4 … 31.0 28.6 27.7 30.8 8 28.6 266.76" 355 47.7 215.9 222 117 67 67 170.7 171.4 … 36.7 36.3 35.4 39.0 12 28.6 292.18" 420 55.6 269.9 273 133 76 76 221.5 222.2 … 54.4 52.2 49.9 63.5 12 31.8 349.210" 510 63.5 323.8 343 152 86 111 276.2 277.4 … 86.2 77.1 77.1 104.0 16 34.9 431.812" 560 66.7 381.0 400 156 92 117 327.0 328.2 … 102.0 90.7 90.7 134.0 20 34.9 489.014" 605 69.9 412.8 432 165 94 127 359.2 360.2 … 127.0 104.0 113.0 161.0 20 38.1 527.016" 685 76.2 469.9 495 178 106 140 410.5 411.2 … 177.0 150.0 166.0 225.0 20 41.3 603.218" 745 82.6 533.4 546 184 117 152 461.8 462.3 … 215.0 181.0 197.0 286.0 20 44.5 654.020" 815 88.9 584.2 610 190 127 165 513.1 514.4 … 268.0 231.0 259.0 367.0 24 44.5 723.924" 940 101.6 692.2 718 203 140 184 616.0 616.0 … 376.0 331.0 367.0 567.0 24 50.8 838.2

20 Flanges

Facing Dimensions for Ring Joint Flanges 600 and 900 Lbs Flanges to ASME B16.5

600 Lbs Flanges

900 Lbs Flanges 1) 2)

3" 240 38.1 127.0 127 102 54 54

To b

e sp

ecifi

ed b

y p

urch

aser

90.7 91.4 14.0 11.8 11.3 13.2 8 25.4 190.54" 290 44.5 157.2 159 114 70 70 116.1 116.8 23.0 24.0 23.1 24.5 8 31.8 235.05" 350 50.8 185.7 190 127 79 79 143.8 144.4 39.0 37.6 36.7 39.5 8 34.9 279.46" 380 55.6 215.9 235 140 86 86 170.7 171.4 50.0 49.9 47.6 52.2 12 31.8 317.58" 470 63.5 269.9 298 162 102 114 221.5 222.2 79.4 77.1 86.2 90.7 12 38.1 393.710" 545 69.9 323.8 368 184 108 127 276.2 277.4 118.0 111.0 125.0 132.0 16 38.1 469.912" 610 79.4 381.0 419 200 117 143 327.0 328.2 147.0 147.0 168.0 188.0 20 38.1 533.414" 640 85.8 412.8 451 213 130 156 359.2 360.2 181.0 181.0 188.0 236.0 20 41.3 558.816" 705 88.9 469.9 508 216 133 165 410.5 411.2 225.0 193.0 211.0 272.0 20 44.5 616.018" 785 101.6 533.4 565 229 152 190 461.8 462.3 308.0 272.0 295.0 386.0 20 50.8 685.820" 855 108.0 584.2 622 248 159 210 513.1 514.4 376.0 331.0 367.0 488.0 20 54.0 749.324" 1040 139.7 692.2 749 292 203 267 616.0 616.0 680.0 635.0 703.0 918.0 20 66.7 901.7Notes: 1) Use class 1500 Lbs dimensions between 1⁄2" and 2 1⁄2" sizes; 2) Socket Welding Flanges (≥ 3", 900 Lbs) are not listed in ASME B16.5

600 Lbs 900 LbsNominal Pipe Size, NPS

Pitch Diameter

Deepth WidthRadius at Bottom

Diameter of Raised Portion

Groove Number


Pitch Diameter

Depth WidthRadiusat Bottom

Diameter of Raised Portion

Groove Number

P mm E mm F mm R mm K mm P mm E mm F mm Rmm K mm½" 34.14 5.54 7.14 0.8 51.0 R11¾" 42.88 6.35 8.74 0.8 63.5 R131" 50.80 6.35 8.74 0.8 70.0 R161¼" 60.33 6.35 8.74 0.8 79.5 R181½" 68.27 6.35 8.74 0.8 90.5 R202" 82.55 7.92 11.91 0.8 108.0 R232½" 101.60 7.92 11.91 0.8 127.0 R263" 1) 117.48 7.92 11.91 0.8 146.0 R30 3" 123.83 7.92 11.91 0.8 156 R313" 123.83 7.92 11.91 0.8 146.0 R31 4" 149.23 7.92 11.91 0.8 181 R373½" 131.78 7.92 11.91 0.8 159.0 R34 5" 180.98 7.92 11.91 0.8 216 R414" 149.23 7.92 11.91 0.8 175.0 R37 6" 211.12 7.92 11.91 0.8 241 R455" 180.98 7.92 11.91 0.8 210.0 R41 8" 269.88 7.92 11.91 0.8 308 R496" 211.12 7.92 11.91 0.8 241.0 R45 10" 323.85 7.92 11.91 0.8 362 R538" 269.88 7.92 11.91 0.8 302.0 R49 12" 381.00 7.92 11.91 0.8 419 R5710" 323.85 7.92 11.91 0.8 356.0 R53 14" 419.10 11.13 16.66 1.5 467 R6212" 381.00 7.92 11.91 0.8 413.0 R57 16" 469.90 11.13 16.66 1.5 524 R6614" 419.10 7.92 11.91 0.8 457.0 R61 18" 533.40 12.70 19.84 1.5 594 R70All dimensions are in millimeters Notes: 1) Raised face is equal to the groove dimension “E” but is not subject to the tolerance for the groove2) Lap joint flanges only!

Welding Neck Slip-On Lap Joint



Diam. of hole

B1

AX

RBolt circle diam.

O

1⁄16"

371⁄2°

CY1

7 mm

Diam. of bolt holeXB2

OBolt circle diam.

R 7 mm

Y2C

Diam. of bolt hole

Radius

Y3C

OBolt circle diam.

XB3

Kmin

P E 1)

E 1)

23 deg.F

R

Kmin

P E 1)

E 1)

23 deg.F

R

O

R

C

Bolt circie diam.

Diam. of bolt hole

O

R

D

X

C

Bolt circie diam.

Diam. of bolt hole

O

R

XScrewed

C

Bolt circie diam. 7 mm

Diam. of bolt hole

Thread lenght

21Flanges

Facing Dimensions for Ring Joint Flanges 1500 and 2500 Lbs Flanges to ASME B16.5

1500 Lbs Flanges

2500 Lbs Flanges 1)

Blind Socket-Welding Threaded




O.D. of Flange


O.D. raised Face large Male and Large Tongue

Diameter of Hub


Welding Neck

Threaded/ Slip-On/ Socket Welding

Lap Joint



Min. LapJoint

Depth of Socket

Welding Neck


Lap Joint




O C R X Y1 Y2 Y3 B1 B2 B3 D ½" 120 22.3 34.9 38 60 32 32

To b

e sp

ecifi

ed b

y p

urch

aser

22.2 22.9 10 2.3 1.8 1.8 1.8 4 22.2 82.6¾" 130 25.4 42.9 44 70 35 35 27.7 28.2 11 2.7 2.3 2.3 2.7 4 22.2 88.91" 150 28.6 50.8 52 73 41 41 34.5 34.9 13 4.1 3.6 3.6 3.6 4 25.4 101.61¼" 160 28.6 63.5 64 73 41 41 43.2 43.7 14 4.5 4.1 4.1 4.1 4 25.4 111.11½" 180 31.8 73.0 70 83 44 44 49.5 50.0 16 5.9 5.4 5.4 5.9 4 28.6 123.82" 215 38.1 92.1 105 102 57 57 61.9 62.5 17 11.3 11.3 11.3 11.3 8 25.4 165.12½" 245 41.3 104.8 124 105 64 64 74.6 75.4 19 16.3 16.3 16.0 15.9 8 28.6 190.53" 265 47.7 127.0 133 117 … 73 … 91.4 … 21.8 21.8 21.3 21.8 8 31.8 203.24" 310 54.0 157.2 162 124 … 90 … 116.8 … 33.0 33.1 34.0 33.1 8 34.9 241.35" 375 73.1 185.7 197 156 … 105 … 144.4 … 59.0 59.0 63.5 63.5 8 41.3 292.16" 395 82.6 215.9 229 171 … 119 … 171.4 … 75.0 74.8 77.1 72.6 12 38.1 317.58" 485 92.1 269.9 292 213 … 143 … 222.2 … 125.0 118.0 129.0 136.0 12 44.5 393.710" 585 108.0 323.8 368 254 … 178 … 277.4 … 206.0 197.0 220.0 231.0 12 50.8 482.612" 675 123.9 381.0 451 283 … 219 … 328.2 … 313.0 263.0 286.0 313.0 16 54.0 571.514" 750 133.4 412.8 495 298 … 241 … 360.2 … 426.0 … 404.0 442.0 16 60.3 635.016" 825 146.1 469.9 552 311 … 260 … 411.2 … 567.0 … 522.0 590.0 16 66.7 704.818" 915 162.0 533.4 597 327 … 276 … 462.3 … 737.0 … 669.0 794.0 16 73.0 774.720" 985 177.8 584.2 641 356 … 292 … 514.4 … 930.0 … 805.0 1010.0 16 79.4 831.824" 1170 203.2 692.2 762 406 … 330 … 616.0 … 1510.0 … 1326.0 1644.0 16 92.1 990.6

½" 135 30.2 34.9 43 73 40 40

To b

e sp

ecifi

ed b

y p

urch

aser

(o

nly

Wel

din

g N

eck)

22.9

Not

man

. In

2500

Lb

.

3.2 3.2 3.2 3.2 4 22.2 88.9¾" 140 31.8 42.9 51 79 43 43 28.2 3.6 3.6 3.6 3.6 4 22.2 95.21" 160 35.0 50.8 57 89 48 48 34.9 5.4 5.0 5.0 5.0 4 25.4 108.01¼" 185 38.1 63.5 73 95 52 52 43.7 7.7 7.3 7.3 7.7 4 28.6 130.21½" 205 44.5 73.0 79 111 60 60 50.0 11.3 10.0 10.0 10.4 4 31.8 146.02" 235 50.9 92.1 95 127 70 70 62.5 19.0 17.2 16.8 17.7 8 28.6 171.42½" 265 57.2 104.8 114 143 79 79 75.4 23.6 24.9 24.0 25.4 8 31.8 196.83" 305 66.7 127.0 133 168 … 92 91.4 42.6 37.6 36.3 39.0 8 34.9 228.64" 355 76.2 157.2 165 190 … 108 116.8 65.8 56.7 54.4 61.2 8 41.3 273.05" 420 92.1 185.7 203 229 … 130 144.4 111.0 95.3 93.0 102.0 8 47.6 323.86" 485 108.0 215.9 235 273 … 152 171.4 172.0 147.0 143.0 156.0 8 54.0 368.38" 550 127.0 269.9 305 318 … 178 222.2 263.0 220.0 213.0 240.0 12 54.0 438.210" 675 165.1 323.8 375 419 … 229 277.4 488.0 422.0 408.0 465.0 12 66.7 539.812" 760 184.2 381.0 441 464 … 254 328.2 692.0 499.0 499.0 590.0 12 73.0 619.1All dimensions are in millimeters Notes: 1) Socket Welding Flanges in 2500 Lbs class are not listed in ASME B16.5.

1500 Lbs 2500 Lbs

NPS Pitch Diameter

Depth WidthRadius at Bottom

Diame-ter of Raised Portion

Groove Number

NPS Pitch Diameter

Depth WidthRadius at Bot-tom

Diame-ter of Raised Portion

Groove Number

P mm E mm F mm R mm K mm P mm E mm F mm R mm K mm½" 39.67 6.35 8.74 0.8 60.5 R12 ½" 42.88 6.35 8.74 0.8 65.0 R13¾" 44.45 6.35 8.74 0.8 66.5 R14 ¾" 50.80 6.35 8.74 0.8 73.0 R161" 50.80 6.35 8.74 0.8 71.5 R16 1" 60.33 6.35 8.74 0.8 82.5 R181¼" 60.33 6.35 8.74 0.8 81.0 R18 1¼" 72.23 7.92 11.91 0.8 102.0 R211½" 68.27 6.35 8.74 0.8 92.0 R20 1½" 82.55 7.92 11.91 0.8 114.0 R232" 95.25 7.92 11.91 0.8 124.0 R24 2" 101.60 7.92 11.91 0.8 133.0 R262½" 107.95 7.92 11.91 0.8 137.0 R27 2½" 111.13 9.53 13.49 1.5 149.0 R283" 136.53 7.92 11.91 0.8 168.0 R35 3" 127.00 9.53 13.49 1.5 168.0 R324" 161.93 7.92 11.91 0.8 194.0 R39 4" 157.18 11.13 16.66 1.5 203.0 R385" 193.68 7.92 11.91 0.8 229.0 R44 5" 190.50 12.70 19.84 1.5 241.0 R426" 211.14 9.53 13.49 1.5 248.0 R46 6" 228.60 12.70 19.84 1.5 279.0 R478" 269.88 11.13 16.66 1.5 318.0 R50 8" 279.40 14.27 23.01 1.5 340.0 R5110" 323.85 11.13 16.66 1.5 371.0 R54 10" 342.90 17.48 30.18 2.4 425.0 R5512" 381.00 14.27 23.01 1.5 438.0 R58 12" 406.40 17.48 33.32 2.4 495.0 R60All dimensions are in millimeters Notes: 1) Raised face is equal to the groove dimension “E” but is not subject to the tolerance for the groove

7 mm 7 mm

B2B1

Y1 Y2

22 Flanges

Straight Hub Welding Flanges ASME B16.5

No-minal Pipe Size, NPS


min. Thick-ness of Flange


Diame-ter of Hub

Diameter of Bore

Length through Hub1)

Drilling


Num-ber of Bolts

Dia-meter of Bolt Holes

O C R A B H BC d½" 95 12.7 34.9 38 15.8 229 66.7 4 15.9¾" 115 14.3 42.9 48 20.9 229 82.6 4 19.11" 125 15.9 50.8 54 26.6 229 88.9 4 19.11¼" 135 17.5 63.5 64 35.1 229 98.4 4 19.11½" 155 19.1 73.0 70 40.9 229 114.3 4 22.22" 165 20.7 92.1 84 52.5 229 127.0 8 19.12½" 190 23.9 104.8 100 62.7 229 149.2 8 22.23" 210 27.0 127.0 117 77.9 229 168.3 8 22.23½" 230 28.6 139.7 133 90.1 229 184.1 8 22.24" 255 30.2 157.2 146 102.3 229 200.0 8 22.25" 280 33.4 185.7 178 128.2 305 235.0 8 22.26" 320 35.0 215.9 206 154.1 305 269.9 12 22.28" 380 39.7 269.9 260 202.7 305 330.2 12 25.410" 445 46.1 323.8 321 254.6 305 387.4 16 28.612" 520 49.3 381.0 375 304.8 305 450.8 16 31.814" 585 52.4 412.8 425

To b

e sp

ecifi

ed b

y p

urch

aser

305 514.4 20 31.816" 650 55.6 469.9 483 305 571.5 20 34.918" 710 58.8 533.4 533 305 628.6 24 34.920" 775 62.0 584.2 587 305 685.8 24 34.924" 915 68.3 692.2 702 305 812.8 24 41.3





Dia-meter of Hub

Diameter of Bore


Drilling


Num-ber of Bolts


O C R A B H BC d1"

To b

e sp

ecifi

ed b

y p

urch

aser

1¼"1½"2"2½"3" 240 38.1 127.0 127 229 190.5 8 25.44" 290 44.5 157.2 159 229 235.0 8 31.85" 350 50.8 185.7 190 305 279.4 8 34.96" 380 55.6 215.9 235 305 317.5 12 31.88" 470 63.5 269.9 298 305 393.7 12 38.110" 545 69.9 323.8 368 305 469.9 16 38.112" 610 79.4 381.0 419 305 533.4 20 38.114" 640 85.8 412.8 451 305 558.8 20 41.316" 705 88.9 469.9 508 305 616.0 20 44.518" 785 101.6 533.4 565 305 685.8 20 50.820" 855 108.0 584.2 622 305 749.3 20 54.024" 1040 139.7 692.2 749 305 901.7 20 66.7





Dia-meter of Hub

Diameter of Bore


Drilling


Num-ber of Bolts


O C R A B H BC d1" 150 28.6 50.8 52

To b

e sp

ecifi

ed b

y p

urch

aser

229 101.6 4 25.41¼" 160 28.6 63.5 64 229 111.1 4 25.41½" 180 31.8 73.0 70 229 123.8 4 28.62" 215 38.1 92.1 105 229 165.1 8 25.42½" 245 41.3 104.8 124 229 190.5 8 28.63" 265 47.7 127.0 133 229 203.2 8 31.84" 310 54.0 157.2 162 229 241.3 8 34.95" 375 73.1 185.7 197 305 292.1 8 41.36" 395 82.6 215.9 229 305 317.5 12 38.18" 485 92.1 269.9 292 305 393.7 12 44.510" 585 108.0 323.5 368 305 482.6 12 50.812" 675 123.9 381.0 451 305 571.5 16 54.014" 750 133.4 412.8 495 305 635.0 16 60.316" 825 146.1 469.9 552 305 704.8 16 66.718" 915 162.0 533.4 597 305 774.7 16 73.020" 985 177.8 584.2 641 305 831.8 16 79.424" 1170 203.2 692.2 762 305 990.6 16 92.1





Diame-ter of Hub

Diameter of Bore


Drilling


Num-ber of Bolts


O C R A B H BC d½" 95 14.3 34.9 38

To b

e sp

ecifi

ed b

y p

urch

aser

229 66.7 4 15.9¾" 115 15.9 42.9 48 229 82.6 4 19.11" 125 17.5 50.8 54 229 88.9 4 19.11¼" 135 20.7 63.5 64 229 98.4 4 19.11½" 155 22.3 73.0 70 229 114.3 4 22.22" 165 25.4 92.1 84 229 127.0 8 19.02½" 190 28.6 104.8 100 229 149.2 8 22.23" 210 31.8 127.0 117 229 168.3 8 22.23½" 230 35.0 139.7 133 229 184.2 8 25.44" 275 38.1 157.2 152 229 215.9 8 25.45" 330 44.5 185.7 189 305 266.7 8 28.66" 355 47.7 215.9 222 305 292.1 12 28.68" 420 55.6 269.9 273 305 349.2 12 31.810" 510 63.5 323.8 343 305 431.8 16 34.912" 560 66.7 381.0 400 305 489.0 20 34.914" 605 69.9 412.8 432 305 527.0 20 38.116" 685 76.2 469.9 495 305 603.2 20 41.318" 745 82.6 533.4 546 305 654.0 20 44.520" 815 88.9 584.2 610 305 723.9 24 44.524" 940 101.6 692.2 718 305 838.2 24 50.8

300 Lbs Flanges

900 Lbs Flanges 2)

600 Lbs Flanges

1500 Lbs Flanges

R

H

d

C

BCO

A

B

All dimensions are in millimetersNotes: 1) Other lengths may be furnished by agreement between the end user and manufactuer. 2) Use class 1500 Lbs dimensions between 1⁄2" and 2 1⁄2 sizes.

m Ø

g Ø

J Ø

k ØD Ø

bh

g Øk ØD Ø

b

m Øa Ø

JØ

1⁄16"=1.6 mm

371⁄2˚

23Flanges

Dimensional Tolerances to ASME B16.5

Lap Joint, Slip-On, Threaded, Socket-Welding, Blind Flanges

Welding Neck Flanges

D Outside diameterFor sizes ≤10" ± 2.0 mmFor sizes ≥12" ± 3.0 mm

J Inside diameterSlip-On & Lap Joint 10" and smaller + 1.0 mm / - 0.0 mmSlip-On & Lap Joint 12" and larger + 1.5 mm / - 0.0 mm

g Diameter of contact face2.0 mm raised face ± 1.0 mm7.0 mm raised face ± 0.5 mmtongue and groove, male and female ± 0.5 mm

m Outside diameter of hub For sizes ≤10" ± 2.0 mmFor sizes ≥12" ± 3.0 mm

l Drilling and facing

Bolt circle diameter k ± 1.5 mmCenter-to-Center of adjacent bolt holes ± 0.8 mmConcentricity between bolt circle dia. (k) and machined facing diameters: NPS ≤ 2 1⁄2" ± 0.8 mmNPS ≥ 3" ± 1.5 mm

h Overall length of hubFor sizes ≤10" ± 2.0 mmFor sizes ≥12" ± 3.0 mm

b ThicknessNPS ≤ 18" + 3.0 mm / - 0.0 mmNPS ≥ 20" + 5.0 mm / - 0.0 mm

D Outside diameterFor sizes ≤10" ± 2.0 mmFor sizes ≥12" ± 3.0 mm

J Inside diameterNPS ≤ 10" ± 1.0 mm12" ≤ NPS ≤ 18" ± 1.5 mmNPS ≥ 20" + 3.0 mm / - 1.5 mm

g Diameter of contact face2.0 mm raised face ± 1.0 mm7.0 mm raised face ± 0.5 mmtongue and groove, male and female ± 0.5 mm

a Diameter of hub at point of weldingNPS ≤ 5" + 2.0 mm / - 1.0 mmNPS ≥ 6" + 4.0 mm / - 1.0 mm

m Diameter of hub at baseFor sizes ≤10" ± 2.0 mmFor sizes ≥12" ± 3.0 mm

l Drilling and facing

Bolt circle diameter k ± 1.5 mmCenter-to-Center of adjacent bolt holes ± 0.8 mmConcentricity between bolt circle dia. (k) and machined facing diameters: NPS ≤ 2 1⁄2" ± 0.8 mmNPS ≥ 3" ± 1.5 mm

h Overall length through hubNPS ≤ 4" ± 1.5 mm5" ≤ NPS ≤ 10" + 1.5 mm / - 3.0 mmNPS ≥ 12" + 3.0 mm / - 5.0 mm

b ThicknessNPS ≤ 18" + 3.0 mm / - 0.0 mmNPS ≥ 20" + 5.0 mm / - 0.0 mm

l Ø

l Ø h

We supply the complete range of forged steel fittings

in carbon, alloy and stainless steel to ASME B16.11.

The fittings are available with threaded (NPT to ASME

B 1.20.1) or socket weld ends in classes to 3000 and

6000 pounds.

A

B

A

B

CB

E

B

D

A

B

24 Forged Steel Fittings

Forged Steel Fittings

Forged Threaded Fittings ASME B16.11

90˚ Elbow 45˚ Elbow Street Elbow CrossTee


O.D. of Pipemm

3000 pound seriesNominal Pipe Size, NPS

O.D. of Pipemm

6000 pound seriesCenter-to-End 90-deg Elbows, Tees, Crosses

Outside Diameter of Band

Center-to-End 45-deg Elbows

Center-to-End Street Elbows


Center-to-End 90-deg Elbows, Tees, Crosses

Outside Diameter of Band

Center-to-End 45-deg Elbows



A B C D E A B C D E1⁄8" 10.3 21.0 22.0 17.0 25.0 19.0 1⁄8" 10.3 25.0 25.0 19.0 32.0 22.01⁄4" 13.7 25.0 25.0 19.0 32.0 22.0 1⁄4" 13.7 28.0 33.0 22.0 38.0 25.03⁄8" 17.1 28.0 33.0 22.0 38.0 25.0 3⁄8" 17.1 33.0 38.0 25.0 41.0 28.01⁄2" 21.3 33.0 38.0 25.0 41.0 28.0 1⁄2" 21.3 38.0 46.0 28.0 48.0 35.03⁄4" 26.7 38.0 46.0 28.0 48.0 35.0 3⁄4" 26.7 44.0 56.0 33.0 57.0 44.01" 33.4 44.0 56.0 33.0 57.0 44.0 1" 33.4 51.0 62.0 35.0 66.0 51.011⁄4" 42.2 51.0 62.0 35.0 66.0 51.0 11⁄4" 42.2 60.0 75.0 43.0 71.0 54.011⁄2" 48.3 60.0 75.0 43.0 71.0 54.0 11⁄2" 48.3 64.0 84.0 44.0 84.0 64.02" 60.3 64.0 84.0 44.0 84.0 64.0 2" 60.3 83.0 102.0 52.0 105.0 83.0All dimensions are in millimeters

Dimensions

25Forged Steel Fittings

Weights (kg/pce, approx.)

Union* Reducer Half Coupling Pipe CapCoupling


O.D. of Pipemm

3000 pound seriesNom.bore

PipeO.D. mm

6000 pound series

End-to End Union

End-to-End Coupling, Reducer

Outside Diameter

End-to-End Half Coupling

End-to-End Pipe Cap

End-to End Union

End-to-End Coupling, Reducer

Outside Diameter

End-to-End Half Coupling

End-to-End Pipe Cap

F G H J K F G H J K1⁄8" 10.3 44.5 32.0 16.0 16.0 19.0 1⁄8" 10.3 – 32.0 22.0 16.0 –1⁄4" 13.7 44.5 35.0 19.0 17.5 25.0 1⁄4" 13.7 52.5 35.0 25.0 17.5 27.03⁄8" 17.1 51.0 38.0 22.0 19.0 25.0 3⁄8" 17.1 52.5 38.0 32.0 19.0 27.01⁄2" 21.3 52.0 48.0 28.0 24.0 32.0 1⁄2" 21.3 73.0 48.0 38.0 24.0 33.03⁄4" 26.7 57.0 51.0 35.0 25.5 37.0 3⁄4" 26.7 86.0 51.0 44.0 25.5 38.01" 33.4 63.0 60.0 44.0 30.0 41.0 1" 33.4 95.0 60.0 57.0 30.0 43.011⁄4" 42.2 72.0 67.0 57.0 33.5 44.0 11⁄4" 42.2 98.5 67.0 64.0 33.5 46.011⁄2" 48.3 80.0 79.0 64.0 39.5 44.0 11⁄2" 48.3 107.0 79.0 76.0 39.5 48.02" 60.3 89.0 86.0 76.0 43.0 48.0 2" 60.3 118.0 86.0 92.0 43.0 51.0All dimensions in millimeters*Note: Unions can be fitted with integral or inserted seats.

Dimensions

3000 pound series

6000 pound series

Nom.bore

90° Elbow Tee 45° Elbow Street Elbow Cross UnionCoupling, Reducer

HalfCoupling

Pipe Cap

1⁄8" 0.11 0.11 0.11 0.11 0.20 0.17 0.06 0.03 0.011⁄4" 0.17 0.17 0.11 0.11 0.17 0.17 0.06 0.03 0.033⁄8" 0.28 0.37 0.27 0.17 0.45 0.27 0.06 0.04 0.061⁄2" 0.59 0.54 0.34 0.23 0.68 0.45 0.11 0.09 0.113⁄4" 0.62 0.85 0.54 0.40 1.14 0.60 0.20 0.11 0.141" 1.13 1.13 0.85 0.65 1.62 0.80 0.28 0.14 0.2311⁄4" 1.25 1.42 0.96 1.02 1.87 1.13 0.71 0.34 0.4511⁄2" 1.59 2.27 1.36 1.36 2.95 1.45 0.99 0.51 0.742" 2.50 3.06 1.93 2.35 3.69 2.50 1.42 0.71 1.42

Nom.bore

90° Elbow Tee 45° Elbow Street Elbow Cross UnionCoupling, Reducer

HalfCoupling

Pipe Cap

1⁄8" 0.11 0.23 0.11 0.15 0.26 0.09 0.04 0.061⁄4" 0.28 0.45 0.26 0.17 0.54 0.40 0.09 0.04 0.063⁄8" 0.48 0.62 0.23 0.20 0.58 1.00 0.09 0.06 0.091⁄2" 0.74 0.96 0.65 0.74 1.25 1.20 0.23 0.11 0.143⁄4" 1.19 1.64 0.99 1.13 1.96 1.80 0.45 0.23 0.201" 1.59 2.10 1.22 1.67 2.55 2.50 0.96 0.48 0.3411⁄4" 30.06 3.46 2.13 2.92 4.88 2.90 1.08 0.54 0.6011⁄2" 3.40 4.37 2.61 3.80 5.22 4.40 1.99 0.99 0.772" 6.10 8.56 4.30 10.07 7.00 3.52 4.76 1.47

H

GF

H

G

H

J

H

K

26 Forged Steel Fittings

Socket-Welding Fittings ASME B16.11

90˚ Elbow 45˚ Elbow CrossTee

Union Reducer Half coupling Pipe CapCoupling

Dimensions

Dimensions


O.D. of Pipe

3000 pounds series


O.D. of Pipe

6000 pounds series

Socket Bore Diameter

Center-to-End

Socket Wall Thickness

min. Depth of Socket

Cen-ter to Bottom, Elbows, Tees, Crosses

Center-to-End, 45-deg Elbows

Center to Bottom, 45-deg Elbows


Cen-ter-to-End

Socket Wall Thickness


Center to Bottom, Elbows, Tees, Crosses

Center-to-End

Center to Bottom, 45-deg Elbows

C max.

Cmin.

A Bavg.

Bmin.

D E F G C max.

Cmin.

A B D E F G

1⁄8" 10.3 11.2 10.8 20.5 3.18 3.18 9.5 11.0 17.5 8.0 1⁄8" 10.3 11.2 10.8 20.5 3.96 3.43 9.5 11.0 17.5 8.01⁄4" 13.7 14.6 14.2 20.5 3.78 3.30 9.5 11.0 17.5 8.0 1⁄4" 13.7 14.6 14.2 23.0 4.60 4.01 9.5 13.5 17.5 8.03⁄8" 17.1 18.0 17.6 23.0 4.01 3.50 9.5 13.5 17.5 8.0 3⁄8" 17.1 18.0 17.6 25.0 5.03 4.37 9.5 15.5 20.5 11.01⁄2" 21.3 22.2 21.8 25.0 4.67 4.09 9.5 15.5 20.5 11.0 1⁄2" 21.3 22.2 21.8 28.5 5.97 5.18 9.5 19.0 22.0 12.53⁄4" 26.7 27.6 27.2 31.5 4.90 4.27 12.5 19.0 25.5 13.0 3⁄4" 26.7 27.6 27.2 35.0 6.96 6.04 12.5 22.5 26.5 14.01" 33.4 34.3 33.9 35.0 5.69 4.98 12.5 22.5 26.5 14.0 1" 33.4 34.3 33.9 39.5 7.92 6.93 12.5 27.0 30.0 17.511⁄4" 42.2 43.1 42.7 39.5 6.07 5.28 12.5 27.0 30.0 17.5 11⁄4" 42.2 43.1 42.7 44.5 7.92 6.93 12.5 32.0 33.0 20.511⁄2" 48.3 49.2 48.8 44.5 6.35 5.54 12.5 32.0 33.0 20.5 11⁄2" 48.3 49.2 48.8 50.5 8.92 7.80 12.5 38.0 38.0 25.52" 60.3 61.7 61.2 54.0 6.93 6.04 16.0 38.0 41.5 25.5 2" 60.3 61.7 61.2 57.0 10.92 9.50 16.0 41.0 44.5 28.5All dimensions are in millimeters


O.D. of Pipe

3000 pounds seriesNominal Pipe Size, NPS

O.D. of Pipe

6000 pounds series



End-to-End Couplings, Reducer

End-to-End Unions

Outside Diameter

Length of Bore

End-to-End Caps



End-to-End Couplings, Reducer

End-to-End Unions

Outside Dia-meter

Length of Bore

End-to-End Caps

Cmax.

Cmin.

D K L M O P Cmax.

Cmin.

D K L M O P

1⁄8" 10.3 11.2 10.8 9.5 25.5 44.5 18.0 6.5 14.3 1⁄8" 10.3 11.2 10.8 9.5 25.5 20 6.5 15.91⁄4" 13.7 14.6 14.2 9.5 25.5 44.5 22.0 6.5 14.3 1⁄4" 13.7 14.6 14.2 9.5 25.5 25 6.5 15.93⁄8" 17.1 18.0 17.6 9.5 27.0 51.0 25.5 6.5 14.3 3⁄8" 17.1 18.0 17.6 9.5 27.0 30 6.5 15.91⁄2" 21.3 22.2 21.8 9.5 32.0 52.0 31.0 9.5 15.9 1⁄2" 21.3 22.2 21.8 9.5 32.0 73 35 9.5 17.43⁄4" 26.7 27.6 27.2 12.5 36.5 57.0 37.0 9.5 18.9 3⁄4" 26.7 27.6 27.2 12.5 36.5 86 45 9.5 20.41" 33.4 34.3 33.9 12.5 41.0 63.0 45.0 12.5 22.1 1" 33.4 34.3 33.9 12.5 41.0 92 55 12.5 23.711⁄4" 42.2 43.1 42.7 12.5 42.5 72.0 55.0 12.5 22.1 11⁄4" 42.2 43.1 42.7 12.5 42.5 98.5 60 12.5 23.711⁄2" 48.3 49.2 48.8 12.5 44.5 80.0 62.0 12.5 23.7 11⁄2" 48.3 49.2 48.8 12.5 44.5 107 70 12.5 25.22" 60.3 61.7 61.2 16.0 57.0 89.0 75.0 19.0 28.7 2" 60.3 61.7 61.2 16.0 57.0 118 85 19.0 31.7All dimensions are in millimeters

A

B

C

D E

AB

C

D E

CB F

DG

A

C

B

D E

L

C

K

D

C

B

DP

C

B

K

O D

C M

K

O D

C M

27Forged Steel Fittings

Weights (kg/pce, approx.)

3000 pound series

6000 pound series

Nom.bore

90° Elbow Tee 45° Elbow Cross Union Coupling, Reducer

HalfCoupling

Pipe Cap

1⁄8" 0.06 0.11 0.06 0.11 0.131⁄4" 0.06 0.11 0.06 0.11 0.14 0.05 0.05 0.043⁄8" 0.11 0.14 0.09 0.17 0.33 0.07 0.08 0.061⁄2" 0.23 0.28 0.17 0.37 0.34 0.10 0.13 0.093⁄4" 0.31 0.40 0.23 0.51 0.45 0.17 0.20 0.131" 0.60 0.62 0.40 0.68 0.70 0.25 0.32 0.2111⁄4" 0.71 0.91 0.57 1.02 1.30 0.38 0.47 0.2911⁄2" 0.85 1.13 0.74 1.39 1.30 0.46 0.50 0.472" 1.47 1.70 1.22 2.32 2.35 0.75 0.96 0.74

Nom.bore

90° Elbow Tee 45° Elbow Cross Union Coupling, Reducer

HalfCoupling

Pipe Cap

1⁄4"3⁄8" 0.23 0.14 0.21 0.42 0.23 0.15 0.171⁄2" 0.43 0.28 0.40 0.68 1.20 0.23 0.23 0.173⁄4" 0.65 0.40 0.60 1.13 1.80 0.34 0.34 0.231" 1.02 0.62 0.94 1.87 2.50 0.57 0.67 0.4111⁄4" 1.45 0.91 1.13 2.38 2.90 0.69 0.75 0.6211⁄2" 2.38 1.13 1.96 3.97 4.40 0.99 1.18 0.792" 3.03 1.70 2.18 4.28 7.00 1.90 2.14 1.46

Small bore fittings can be supplied with various types of

ends: threaded, bevelled and plain. The bevelled ends

are made according to ASME B16.25, the threaded ends

to API or NPT.

28 Nipples

Nipples

Swage Nipples

Nominal Pipe Sizes (NPS) Weights in kg (approx.)

Large End Small End STD XS S160 XXS3⁄8" 1⁄4" 0.09 0.11 0.14 0.20

1⁄2"3⁄8"

0.09 0.11 0.14 0.201⁄4"

3⁄4"1⁄2"

0.14 0.17 0.23 0.283⁄8"

1"3⁄4"

0.23 0.28 0.40 0.511⁄2"

11⁄4"1"

0.34 0.45 0.57 0.793⁄4"1⁄2"

11⁄2"

11⁄4"

0.45 0.62 0.85 1.881"3⁄4"1⁄2"

2"

11⁄2"

0.85 1.13 1.53 1.981"3⁄4"1⁄2"

Symbol Full descriptionBET Both ends threadedBEB Both ends bevelledBEP Both ends plainLEBP Large end bevelled small end plainLEBT Large end bevelled small end threadedLEPB Large end plain small end bevelledLEPT Large end plain small end threadedLETB Large end threaded small end bevelledLETP Large end threaded small end plain

Buttwelding End

according to ASME B16.25

Cut square

Plain End

Theaded Ends

according to

API or NPT

Dimensions and Weights

29Nipples

Dimensions Weight in kg (approx.)

Nominal Pipe Sizes (NPS) Length Pipe NipplesSch. 80- BET

Pipe NipplesSch. 160-BET

1⁄4"

close 0.010 0.020

x 11⁄2" 0.030 0.040

x 2" 0.040 0.043

x 21⁄2" 0.050 0.054

x 3" 0.060 0.065

x 4" 0.080 0.088

3⁄8"

close 0.010 0.020

x 11⁄2" 0.041 0.043

x 2" 0.055 0.062

x 21⁄2" 0.069 0.074

x 3" 0.083 0.094

x 4" 0.110 0.200

1⁄2"

close 0.030 0.040

x 11⁄2" 0.061 0.073

x 2" 0.081 0.098

x 21⁄2" 0.101 0.122

x 3" 0.122 0.146

x 4" 0.162 0.195

x 6" 0.243 0.293

3⁄4"

close 0.050 0.060

x 11⁄2" 0.082 0.108

x 2" 0.110 0.145

x 21⁄2" 0.137 0.181

x 3" 0.164 0.217

x 4" 0.219 0.289

x 6" 0.329 0.434

1"

close 0.130 0.150

x 2" 0.162 0.212

x 21⁄2" 0.202 0.264

x 3" 0.242 0.317

x 4" 0.323 0.423

x 6" 0.485 0.635

11⁄4"

close 0.220 0.260

x 3" 0.335 0.420

x 4" 0.446 0.560

x 6" 0.669 0.840

11⁄2"

close 0.260 0.290

x 3" 0.405 0.542

x 4" 0.540 0.723

x 6" 0.810 1.085

2"

close 0.420 0.480

x 3" 0.560 0.833

x 4" 0.747 1.110

x 6" 1.121 1.665

Dimensions and Weights ASME B36.10 / ASTM A 106

galvanized / black

Pipe Nipples

Our branch fittings meet mandatory design require-

ments for reinforced branch connections. They are pro-

vided with general outlet radius, so that the same fitting

can be used for different pipe sizes which makes them a

solution for many purposes. Design calculations can be

provided upon request.

C

A 37˚30

'

C D

A 37˚30

'

C

A 371 ⁄2˚

Reducing Size stdxs

stdxs

s160xxsFull Size Reducing and Full Size

30 Branch Fittings

Branch Fittings

Welding Outlets

Welding Outlets - STD, Dimensions and Weights

Welding Outlets - XS, Dimensions and Weights

Outlet sizeReducing Sizes Full Sizes

A C Approx. weight in kg A C D Approx. weight in kg1⁄2" 19.00 24.00 0.08 19.00 24.00 15.80 0.073⁄4" 22.20 30.00 0.11 22.20 30.00 21.00 0.111" 27.00 36.50 0.25 27.00 36.50 26.60 0.1811⁄4" 31.50 44.50 0.35 31.50 44.50 35.00 0.3211⁄2" 33.40 51.00 0.45 33.40 51.00 40.90 0.362" 38.00 65.00 0.80 38.00 65.00 52.50 0.6821⁄2" 41.20 76.15 1.13 41.20 76.15 62.80 1.023" 44.50 93.50 1.82 44.50 93.50 78.00 1.7031⁄2" 47.50 112.60 2.50 47.50 112.60 90.20 2.304" 51.00 120.50 2.86 51.00 120.50 102.20 3.105" 57.00 141.30 4.65 57.00 141.30 128.20 3.906" 60.30 170.00 6.45 60.30 170.00 154.00 6.70


A C Approx. weight in kg A C D Approx. weight in kg1⁄2" 19.00 24.00 0.09 19.00 24.00 13.90 0.073⁄4" 22.20 30.00 0.14 22.20 30.00 18.90 0.111" 27.00 36.50 0.21 25.40 36.50 24.30 0.1811⁄4" 31.50 44.50 0.41 28.50 44.50 32.80 0.3211⁄2" 33.40 51.00 0.50 31.50 51.00 38.10 0.412" 38.00 65.00 0.80 38.00 65.00 49.30 0.752 1/2" 41.20 76.15 1.18 41.20 76.15 59.00 1.153" 44.50 93.50 1.90 44.50 93.50 73.70 1.9031⁄2" 47.50 112.60 2.55 47.50 112.60 85.40 2.304" 51.00 120.50 3.00 51.00 120.50 97.20 3.505" 57.00 141.30 4.75 57.00 141.30 122.30 4.326" 78.00 170.00 10.50 78.00 170.00 146.30 6.80



C

AG

F

Reducing Size

31Branch Fittings

Socket Outlets

Welding Outlets - SCH 160 and XXS, Dimensions and Weights

Socket Outlets, Dimensions and Weights, (Socket-Welding to ASME B16.11)

Threaded Outlets, Dimensions and Weights

3000 Lbs

3000 Lbs

6000 Lbs

6000 Lbs


A C Approx. weight in kg A C Approx. weight in kg1⁄2" 28.50 14.30 0.110 28.50 14.30 0.1103⁄4" 31.50 19.00 0.320 31.50 19.00 0.3201" 38.00 25.50 0.380 38.00 25.50 0.38011⁄4" 44.50 33.40 0.570 44.50 33.40 0.57011⁄2" 50.70 38.00 0.800 50.70 38.00 0.8002" 55.50 42.90 1.000 55.50 42.90 1.000


A C F GApprox. weight in kg

A C D F GApprox. weight in kg

1⁄2" 25.50 24.00 31.80 12.00 0.140 25.50 22.40 16.00 31.80 12.00 0.0603⁄4" 27.00 30.00 36.60 12.70 0.150 27.00 30.00 21.00 36.60 15.00 0.1101" 33.40 36.50 46.10 13.50 0.300 33.40 36.50 26.70 46.10 15.00 0.30011⁄4" 33.40 44.50 55.60 15.00 0.400 33.40 44.50 35.00 55.60 19.00 0.30011⁄2" 34.80 51.00 62.00 16.00 0.470 34.80 51.00 40.90 62.00 18.50 0.4002" 38.00 65.00 74.70 17.50 0.730 38.00 65.00 52.50 74.70 20.00 0.63021⁄2" 46.00 76.15 87.40 24.00 1.250 46.00 77.80 62.80 87.40 26.00 1.0303" 50.70 93.50 104.80 28.50 1.720 50.70 93.50 77.90 104.80 28.50 1.70031⁄2" 53.80 101.50 122.30 28.50 1.950 52.30 112.75 90.10 117.50 28.50 1.9504" 57.00 120.50 130.20 29.50 3.300 55.50 127.00 102.20 130.20 31.00 3.000

Outlet sizeReducing Sizes

A C FApprox. weight in kg

1⁄2" 31.50 19.00 40.00 0.2003⁄4" 36.50 25.50 46.00 0.3501" 39.60 33.40 57.20 0.60011⁄4" 41.00 38.00 65.10 0.71011⁄2" 42.70 49.30 76.30 0.9002" 52.10 70.00 92.10 2.300


A C FApprox. weight in kg

A C D FApprox. weight in kg

1⁄2" 25.50 24.00 31.80 0.110 25.50 24.00 16.00 31.80 0.0703⁄4" 27.00 30.00 36.60 0.160 27.00 30.00 20.65 36.60 0.1101" 33.40 36.50 46.10 0.300 33.40 36.60 27.00 46.10 0.20011⁄4" 33.40 44.50 55.60 0.410 33.40 44.50 34.90 55.60 0.32011⁄2" 34.80 51.00 62.00 0.450 34.80 51.00 41.20 62.00 0.4102" 38.00 65.00 74.70 0.800 38.00 65.00 52.40 74.70 0.65021⁄2" 46.00 76.15 87.40 1.370 46.00 76.15 63.50 87.40 1.1303" 50.70 93.50 104.80 2.000 50.70 93.50 77.80 104.80 1.95031⁄2" 53.80 101.50 122.30 2.610 53.80 112.75 90.50 117.50 2.0504" 57.00 120.50 130.20 3.230 57.00 120.50 103.20 130.20 3.091

Outlet sizeReducing Sizes

A C F GApprox. weight in kg

1⁄2" 31.50 19.00 39.70 9.50 0.2503⁄4" 36.50 25.50 45.30 14.50 0.3701" 39.60 33.40 57.20 16.00 0.60011⁄4" 41.00 38.00 65.10 20.50 0.75011⁄2" 42.70 49.30 76.30 20.50 0.9202" 52.10 70.00 92.10 22.50 2.350


C D

AG

F

Full Size



A

C

32 Branch Fittings

Nipple Outlets

(plain, threaded & bevelled ends)

Outlet Size - Run Pipe Size

Outlet sizeDimensions

3000 Lbs 6000 LbsA C A C

1⁄2" 89 24.0 89 14.53⁄4" 89 30.0 89 19.01" 89 36.5 89 25.511⁄4" 89 44.5 89 24.011⁄2" 89 51.0 89 38.02" 89 65.0 89 43.0

Outlet size suitable run-pipe sizes1⁄2" 1⁄2" 3⁄4" 1" 11⁄2" - 11⁄4" 21⁄2" - 2" 8" - 3" 36" - 10" 3⁄4" 3⁄4" 1" 11⁄2" - 11⁄4" 21⁄2" - 2" 5" - 3" 12" - 6" 36" - 14" 1" 1" 11⁄4" 11⁄2" 2" 21⁄2" 3 1/2" - 3" 5" - 4" 10" - 6" 36" - 12" 11⁄4" 11⁄4" 11⁄2" 2" 21⁄2" 31⁄2-3" 5" - 4" 8" - 6" 18" - 10" 36" - 20" 11⁄2" 11⁄2" 2" 21⁄2" 3" 4" - 31⁄2" 6" - 5" 12" - 8" 24" - 14" 36" - 26" 2" 2" 21⁄2" 3" 31⁄2" 4" 5" 6" 10" - 8" 18" - 12" 36" - 20" 21⁄2" 21⁄2" 3" 31⁄2" 4" 5" 6" 8" 12" - 10" 18" - 14" 36" - 20" 3" 3" 31⁄2" 4" 5" 6" 8" 10" 14" - 12" 20" - 16" 36" - 24" 31⁄2" 31⁄2" 4" 5" 6" 8" 10" 14" - 12" 20" - 16" 36" - 24" 4" 4" 5" 6" 8" 10" 14" - 12" 20" - 16" 36" - 24"

Outlet size suitable run-pipe sizes1⁄2" 36" - 11⁄2" 3⁄4" 36" - 11⁄2" 1" 4" - 1⁄2" 36" - 6" 11⁄4" 4" - 2" 36" - 6" 11⁄2" 4" - 2" 36" - 6"

Outlet size suitable run-pipe sizes1⁄2" 1" - 3⁄4" 2" - 11⁄4" 6" - 21⁄2" 36" - 8" 3⁄4" 1" 21⁄2" - 11⁄4" 10" - 3" 36" - 12" 1" 11⁄4" - 11⁄2" 21⁄2" - 2" 10" - 3" 36" - 12" 11⁄4" 11⁄2" 21⁄2" - 2" 31⁄2" - 3" 8" - 4" 20" - 10" 36" - 24" 11⁄2" 2" 21⁄2" 31⁄2" - 3" 5" - 4" 8" - 6" 18" - 10" 36" - 20" 2" 21⁄2" 3" 4" 5" 6" 10" - 8" 20" - 12" 36" - 24"

Outlet size suitable run-pipe sizes1⁄2" 1⁄2" 11⁄4" - 3⁄4" 36" - 11⁄2" 3⁄4" 1" - 3⁄4" 2" - 11⁄4" 6" - 11⁄2" 36" - 8" 1" 1" 21⁄2" - 11⁄4" 10" - 3" 36" - 12" 11⁄4" 11⁄2" - 11⁄4" 21⁄2" - 2" 10" - 3" 36" - 12" 11⁄2" 11⁄2" 21⁄2" - 2" 31⁄2" - 3" 8" - 4" 20" - 10" 36" - 24" 2" 2" 21⁄2" 31⁄2" - 3" 5" - 4" 8" - 6" 18" - 10" 36 - 20"


Welding Outlets - STD and XS, Socket & Threaded Outlets - 3000 lbs

Welding Outlets - SCH.160 and XXS

Socket & Threaded Outlets - 6000 lbs

Nipple Outlets - 3000 and 6000 lbs

AType 2

Kix grp

B F

C C for reducingD for equal

AType 2

Kix grp

B F

CC for reducingD for equal

33Branch Fittings

Flanged Nipple Outlets

150 lbs/ STDOutlet size

Equal and Reducing STD/STDA B C D F Weight kg (approx.) Type

1⁄2" 150.00 88.90 24.00 15.80 15.80 0.85 13⁄4" 150.00 98.60 30.00 21.00 20.93 1.20 11" 150.00 107.95 36.50 26.60 26.60 1.75 111⁄4" 150.00 117.50 44.50 35.00 35.00 2.45 111⁄2" 150.00 127.00 51.00 40.90 40.90 2.60 12" 150.00 152.40 65.00 52.50 52.50 3.85 1

300 lbs/ STDOutlet size

Equal and Reducing STD/STDA B C D F Weight kg (approx.) Type

1⁄2" 150.00 95.25 24.00 15.80 15.50 1.15 23⁄4" 150.00 117.50 30.00 21.00 20.93 1.75 21" 150.00 123.80 36.50 26.60 26.60 2.25 111⁄4" 150.00 133.35 44.50 35.00 35.00 3.65 111⁄2" 150.00 155.60 51.00 40.90 40.90 3.80 12" 150.00 165.10 65.00 52.50 52.50 4.95 1

300 lbs/ XSOutlet size

Equal and Reducing XS/XSA B C D F Weight kg (approx.) Type

1⁄2" 150.00 88.90 24.00 13.90 13.90 0.85 13⁄4" 150.00 98.60 30.00 18.90 18.90 1.20 11" 150.00 107.95 36.50 24.30 24.30 1.75 111⁄4" 150.00 117.50 44.50 32.50 32.50 2.45 111⁄2" 150.00 127.00 51.00 38.10 38.10 2.60 12" 150.00 152.40 65.00 49.30 49.30 3.85 1

300 lbs/ XSOutlet size

Equal and Reducing XS/XSA B C D F Weight kg (approx.) Type

1⁄2" 150.00 95.25 24.00 13.90 13.90 1.15 23⁄4" 150.00 117.50 30.00 18.90 18.90 1.75 21" 150.00 123.80 36.50 24.30 24.30 2.25 111⁄4" 150.00 133.35 44.50 32.50 32.50 3.65 111⁄2" 150.00 155.60 51.00 38.10 38.10 3.80 12" 150.00 165.10 65.00 49.30 49.30 4.92 1


34

Designation of Test Classes for EFW Pipes

Class Heat Treatment on Pipe Radiography Pressure Test

10 none - -

11 none √ -

12 none √ √

13 none - √

20 stress relieved - -

21 stress relieved √ -

22 stress relieved √ √

23 stress relieved - √

30 normalized - -

31 normalized √ -

32 normalized √ √

33 normalized - √

40 normalized and tempered - -

41 normalized and tempered √ -

42 normalized and tempered √ √

43 normalized and tempered - √

50 quenched and tempered - -

51 quenched and tempered √ -

52 quenched and tempered √ √

53 quenched and tempered - √

ASTM A671, 672, 691 Classes

Raw Material Standards

ASTM A358, A671, A672, A691Pipe Plate

Specification Type Specification Type

ASTM A358 304 ASTM A240 304

304L 304L

304H 304H

316 316

316L 316L

316H 316H

321 321

347 347

ASTM A671 CB65 ASTM A515 65

CB70 70

CC60 ASTM A516 60

CC65 65

CC70 70

CF66 ASTM A203 D

Pipe Plate

Specification Type Specification Type

ASTM A672 B60 ASTM A515 60

B65 65

B70 70

ASTM A691 CM65 ASTM A204 A

1 CR ASTM A387 12 Cl. 1

12 Cl. 2

11⁄4 CR 11 Cl. 1

11 Cl. 2

21⁄4 CR 22 Cl. 1

22 Cl. 2

5 CR 5 Cl. 1

5 Cl. 2

9 CR 9 Cl. 1

9 Cl. 2

91 91 Cl. 2

Test Certificates in accordance to EN 10204:2004

Welding Methods for Pipes

Standard Designation Type of Document Content Document validated by

2.1Declaration of compliance with the order

Certification in accordance with the requirements of the order

the manufacturer

2.2 Test reportCertification in accordance with the requirements of the order including results of non-specific testing

3.1 Inspection Certificate 3.1

Certification in accordance with the requirements of the order including results of specific testing

the manufacturer‘s independent representative of the manufacturing department

3.2 Inspection Certificate 3.2the manufacturer‘s independent representative of the manufacturing department and the purchaser‘s authorised representative or the designated inspector of the official regulation

Shortcut Full Designation

ERW Electric Resistant Welding

HFI High Frequency Induction Welding

SAW Submerged Arc Welding

DSAW Double Submerged Arc Welding

GTAVGas Tungsten Arc Welding (also known as TIG Welding -Tungsten Inert Gas)

Definitions of selected Technical Terms and Test Methods

36 Definitions of selected Technical Terms and Test Methods


1. Chemical Composition1.1 Product AnalysisChemical Analysis of the finished product carried out by the manufacturer

1.2 Heat AnalysisAnalysis of each heat carried out by the steel manufacturer to determine the percentages of the elements specified. Samples shall be taken during casting of a heat.

1.3 Chemical AnalysisDetailed chemical composition of material either determined by a spectroscope/spectrometer or obtained by wet analysis in a laboratory.

2. Mechanical testing2.1 Tensile TestFor determination of tensile strength, yield strength, elonga-tion and reduction of area.

2.2 Bend TestBend tests are carried out to ensure that the steel product has sufficient ductility to withstand bending without fracturing.

2.3 Flattening TestMethod for determining the ability of steel pipes to undergo plastic deformation by flattening. It may also be used to re-veal the defects in the tubes.

2.4 Hardness TestHardness is the resistance of a material to deformation, in-dentation or scratching. A number of methods of evaluat-ing hardness are employed. For example Brinell, Vickers and Rockwell.

2.5 Charpy Impact TestingA test designed to give information on how a specimen of a material will respond to a suddenly applied stress, e.g. shock. A notched test piece is normally employed and the two meth-ods in general use are either the Izod or Charpy test. The result is normally reported as the energy in ft.lbs. or KJ. required to fracture the test piece.

2.6 Drop Weight Tear Test (DWTT)This test method can be used to determine the appearance of propagating fractures in plain carbon or low-alloy pipe steels over the temperature range where the fracture mode changes from brittle to ductile. Similar to the Charpy Impact Test.

2.7 Creep and Stress RupturePractise of stressing material at different temperatures over a long period of time. Creep is a measure of long term plas-tic deformation. Stress rupture is the time to rupture at fixed stress.

3. Non Destructive Examination (NDE)3.1 Radiographic examination (X-ray)The use of x-rays or gamma-rays will be applied to detect dis-continuities in material and to demonstrate their images on a recording medium (e.g. film).

3.2 Ultrasonic ExaminationUltrasonic Testing uses high frequency sound energy to con-duct examinations and make measurements and to detect de-fects longitudinally or circumferentially.

3.3 Eddy Current ExaminationEddy current inspection is one of several NDT methods that use the principal of electromagnetism as the basis for con-ducting examinations

3.4 Magnetic Particle Examination (MPE)Magnetic particle inspection (MPI) is a non-destructive test-ing method used for defect detection. MPI uses magnetic fields and small magnetic particles (i.e. iron filings) to detect flaws in components of a ferromagnetic material.

3.5 Dye Penetrant ExaminationLiquid penetrant testing is a non-destructive method used to detect surface breaking defects in any nonporous mate-rial. Liquid penetrant is applied to the surface and is drawn into defects by capillary action. Once a preset of time has passed, excess penetrant is removed and developer applied to draw out penetrant from defects. Visual inspection is then performed. Visible and Fluorescent Liquid Penetrant Exami-nations are Non-Destructive methods of revealing disconti-nuities that are open to the surfaces of solid and essentially non-porous materials, ferrous or non-ferrous.

3.6 Flux Leakage ExaminationThis practice covers the applications and calibration of equip-ment using the flux leakage test method of detection of outer surface, inner surface and sub-surface discontinuities at/or near the surface in ferromagnetic materials. It is useful for preventive maintenance examination.


3.7 Hydrostatic testPressure test using a fluid (mostly water) to detect leakage or cracks.

4. Corrosion Tests4.1 Intergranular corrosion testStandard practice for detecting susceptibility to intergranular attack in austenitic stainless steels.

4.2 Hydrogen Induced Cracking (HIC)Test pieces are immersed in synthetic seawater with hydrogen sulphide bubbled through for a fixed duration. The step-wise cracking will be measured and reveals the susceptibility of the material to hydrogen attack in sour service.

4.3 Sulphide Stress Corrosion Cracking (SSCC)Laboratory testing of metals for resistance to Sulphide Stress Corrosion Cracking in H2S enviroments.

5. Metallography5.1 MacroetchControlled etching of the surface of a metallic specimen, in-tended to reveal a structure which is visible at low magnifica-tions.

5.2 Metallographic examinationThe primary objective of metallographic examination is to re-veal the constituents and structure of metals and their alloys by means of the microscope.

38

Product TypeDIN Standard

DIN Material No.

DIN Short Name

EN StandardEN Material No.

EN Short Name ASTM/ ASME Material & Grade API Standard API Material

Seamless carbon steel boiler tubes

A / SA 53 Gr.B Spec. 5 L / ISO 3183 Grade B PSL1A / SA 53 Gr.B T&C Spec. 5 L / ISO 3183 Grade B PSL1

17175 1.0305 St 35.8/ I 10216-2 1.0345 P235GH TC 1 Spec. 5 L / ISO 3183 Grade B PSL117175 1.0305 St 35.8/ III 10216-2 1.0345 P235GH TC 2 Spec. 5 L / ISO 3183 Grade B PSL217175 1.0405 St 45.8/ I 10216-2 1.0425 P265GH TC 1 A / SA 106 Gr.B Spec. 5 L / ISO 3183 Grade B PSL1

Spec. 5 L / ISO 3183 Grade X 52 PSL1Welded carbon steel boiler tubes

17177 1.0315 St 37.8/I 10217-2 1.0345 P235GH TC 1 A672 CC65 Cl.. Spec. 5L / ISO 3183 Gr. B PSL1

Seamless pipes for low temperature service

17173 1.0356 TT St 35 N 10216-4 1.0451 P215NL TC 1 A / SA 333 Gr.617173 1.0356 TT St 35 V 10216-4 1.0452 P255QL TC 1 A / SA 333 Gr.617179 1.0566 TStE 355 10216-3 1.0566 P355NL1

Welded pipes for low temperature service

17174 1.0356 TT St 35 N 10217-4 1.0451 P215NL A671 CC60 Cl..

17174 1.0356 TT St 35 V 10217-4 1.0453 P265NL A671 CC65 Cl..

Seamless alloy steel boiler tubes

17175 1.5415 15 Mo 3 10216-2 1.5415 16 Mo 3 A / SA 335 P1, A / SA 209 T1A / SA 335 P11, A / SA 213 T11

17175 1.7335 13 CrMo 4 4 10216-2 1.7335 13 CrMo 4-5 A / SA 335 P12, A / SA 213 T1217175 1.7380 10 CrMo 9 10 10216-2 1.7380 10 CrMo 9-10 A / SA 335 P22, A / SA 213 T2217176 1.7362 12 CrMo 19 5 10216-2 2) 1.7362 X11CrMo5 A / SA 335 P5, A / SA 213 T5SEW 028 1.6368 15 NiCuMoNb 5 10216-2 1.6368 15 NiCuMoNb 5-6-417176 1.7386 X12 CrMo 9 1 10216-2 1.7386 X11CrMo9-1 A / SA 335 P9, A / SA 213 T9

10216-2 1.4903 X10 CrMoVNb 9-1 A / SA 335 P91, A / SA 213 T9117175 1.4922 X20 CrMoV 12 1 10216-2 1.4922 X20 CrMoV 11-1VdTÜV 506 1.7745 15 CrMoV 510

Welded alloy steel boiler tubes

17174 1.0356 TT St 35 N 10217-4 1.0451 P215NL17177 1.5415 15 Mo 3 10217-2 1.5415 16 Mo 3 A / SA 691 Gr. CM65 Cl…

Elbows, tees, reducers, caps

2609 1) 1.0305 St 35.8/ I 10253-2 1.0345 P235GH TC1 A / SA 234 WPB2609 1) 2) 1.0356 TT St 35 N 10253-2 1.0451 P215NL TC1 A / SA 420 WPL 6 2609 1) 2) 1.0356 TT St 35 V 10253-2 2) 1.0452 P255QL TC 1 A / SA 420 WPL 62609 1) 1.5415 15 Mo 3 10253-2 1.5415 16 Mo 3 A / SA 234 WP 1

A / SA 234 WP 112609 1) 1.7335 13 CrMo 4 4 10253-2 1.7335 13 CrMo 4-5 A / SA 234 WP 122609 1) 1.7380 10 CrMo 9 10 10253-2 1.7380 10 CrMo 9-10 A / SA 234 WP 222609 1) 2) 1.7362 12CrMo19.5 10253-2 1.7362 X11 CrMo5 A / SA 234 WP 52609 1) 2) 1.7386 X12 CrMo9.1 10253-2 1.7386 X11 CrMo 9-1 A / SA 234 WP 9

10253-2 1.4903 X10 CrMoVNb 9-1 A / SA 234 WP 91

Welding neck flan-ges, blind flanges, slip-on flanges, lap-joint flanges, plain flanges

17243 1.0460 C 22.810222-2 / 10222-2 3)

1.0352 / 1.0460

P245GH / P250GH

A / SA 105

17103 1.0566 TStE 355 10222-4 1.0565 P355NH A / SA 694 F52A / SA 350 LF2

17243 1.5415 15 Mo 3 10222-2 1.5415 16 Mo 3 A / SA 182 F 1A / SA 182 F 11

17243 1.7335 13 CrMo 4 4 10222-2 1.7335 13 CrMo 4-5 A / SA 182 F 1217243 1.7380 10 CrMo 9 10 10222-2 1.7383 11 CrMo 9-10 A / SA 182 F 22VdTÜV 007/3 1.7362 12 CrMo 19 5 10222-2 1.7366 X16 CrMo5-1 A / SA 182 F5

10222-2 1.4903 X10 CrMoVNb 9-1 A / SA 182 F 91Notes: 1) partly replaced by EN 10253-2 (EN 10253-2 includes technical delivery reqirements and dimensional standards). 2) Standard can be used accordingly (Material not listed). 3) P250GH listed in the German national annex only

Product Type DIN StandardDIN Material No.

DIN Short Name

EN StandardEN Material No.

EN Short Name ASTM/ ASME Material & Grade API Standard API Material

Seamless carbon steel tubes

1629 1.0254 St 37.0 10216-1 1.0254 / 1.0255 P 235 TR1/TR2 A / SA 106 Gr.B Spec. 5 L / ISO 3183 Grade B PSL1

1629 / 17121 1.0421/ 1.0570St 52.0 / St 52.3

10210-1 1.0576 S 355 J2H

10216-3 1.0562 P 355 N10297-1 1.0580 E 355

Welded carbon steel tubes

1626 1.0254 St 37.0 10217-1 1.0254 / 1.0255 P 235 TR1/TR2 A/ SA 53 Gr.B17119 / 17120 1.0254 St 37.0 10219-1 1.0039 S 235 JRH Spec. 5 L / ISO 3183 Grade B PSL1

Seamless hollow bars for machining

ISO 2938 20 MN V 6

Seamless precision steel tubes

2391 1.0308 St 35 BK 10305-1 1.0308 E 235 + C2391 1.0308 ST 35 NBK 10305-1 1.0308 E 235 + N

Seamless hydraulic steel pipe, black / galvanised

1630 1.0255 St 37.4 10216-1 1.0255 P235TR2

Seamless carbon steel tubes for pressure services

DIN 17179 1.0566 TSTE 355 10216-3 1.0566 P 355 NL 1DIN 1629 1.0421 St52.0 10216-3 1.0562 P 355 N

1.0565 P 355 NH

Seamless and welded carbon steel pipes

10208-2 1.0418 L 245 MB API 5L / ISO 3183 Grade B / L24510208-2 1.0429 L 290 MB API 5L / ISO 3183 X42 / L29010208-2 1.0578 L 360 MB API 5L / ISO 3183 X52 / L360

17172 1.0457 StE 240.7 10208-2 1.0457 L 245 NB API 5L / ISO 3183 Grade B / L24517172 1.0484 StE 290.7 10208-2 1.0484 L 290 NB API 5L / ISO 3183 X42 / L29017172 1.0409 StE 320.7 API 5L / ISO 3183 X46 / L32017172 1.0582 StE 360.7 10208-2 1.0582 L 360 NB API 5L / ISO 3183 X52 / L36017172 1.8972 StE 415.7 10208-2 1.8972 L 415 NB API 5L / ISO 3183 X60 / L415

Elbows, tees, reducers, caps

1.0418 L 245 MB A / SA 234 WPB1.0429 L 290 MB A860 WPHY421.0578 L 360 MB A860 WPHY52

1.0457 StE 240.7 1.0457 L 245 NB A / SA 234 WPB1.0484 StE 290.7 1.0484 L 290 NB A860 WPHY421.0409 StE 320.7 A860 WPHY461.0582 StE 360.7 1.0582 L 360 NB A860 WPHY521.8972 StE 415.7 1.8972 L 415 NB A860 WPHY60

Comparison List - Boiler Tubes, Fittings and Flanges

Comparison List - Carbon Steel (seamless/ welded) Pipes, Line Pipes and Fittings

Comparison Lists

www.ferrostaal-piping.com


Phone +31. 168. 489-200 Fax +31. 168. 483-197


Phone +31. 168. 489-200 Fax +31. 168. 483-197 Mail [email protected]

All information in this book is subject to change. Whilst every effort has been made to ensure the accuracy of this publication, neither Ferrostaal Piping Supply nor its agents nor associated companies take any responsibilty for any errors or omissions. The information is current as at date of publication.

We try to keep this catalogue up to date and improve it wherever possible. Therefore we would be grateful for any remarks or cor-rections from you.


Phone +49. 201. 818-2044Fax +49. 201. 818-3930Mail [email protected]

Solutions close at hand

Ferrostaal Piping Supply CatalogueFor the petrochemical, chemical, oil and gas industry

Turning Ideas into Reality.Pub

licat

ion

dat

e: 0

3.20

14


Phone +49. 201. 818-2044Fax +49. 201. 818-3930

Our global presence means that we are always represented locally

through our partner network and group companies. Please visit

www.ferrostaal-piping.com to find representatives near you.

ferrostaal piping supply - catalogue

Documents

suffix s schedule

essen germany phone

kgm asme b36

date of publication

associated companies

group companies

gas industry

shipping volm