fg2 fg2 weatherproof boxes, covers, lampholders & lighting … · 2019. 2. 4. · features and...

FG2 FG2

Effective December, 2007Copyright 2007

800-621-1506www.o-zgedney.com

Weatherproof Boxes, Covers, Lampholders & Lighting Fixtures

Weatherproof Boxes, Covers, Lampholders and Lighting FixturesApplications:Use in branch circuit wiring for wet, damp, or dry locations

• May be used as a junction box or a device box for switches, receptacles, GFCI’s, etc.

• Lampholders are for use in exterior and interior applications to provide safety and security for driveways, door-ways, and walkways.

• Lighting Fixtures are for use in areas where moisture ingress is a concern such as construction sites, tunnels, bridges, subways.

Features and Benefits:

• Rugged continuous and seamless die cast construction prevents entry of dirt, dust and moisture.

• Powder coating is applied for uniform cosmetic coating and weatherproof durability.

• Mounting can be achieved with mounting lugs (provided) or by using the integral mounting knockouts.

• Smooth, accurately tapped hubs prevent wire abrasion.

• Clear UL marking and volumetric marking cast into each box and exten-sion ring facilitate electrical inspection.

• Continuous box and cover compres-sion ensure complete sealing at gasket interface to prevent moisture entry.

• Lockable covers and covers with inte-gral devices are offered.

• Closure plugs (2), mounting lugs (2) and green ground screw provided with each box.

• Mounting hardware and gasket provided with each cover.

• Locking swivel knuckle on lamphold-ers permits positive lamp positioning and accurate directional aiming.

• Lampholders are supplied with all hardware including locknuts, porcelain sockets and internal gaskets for reliabil-ity and weather protection.

• Photocells and lampholders are supplied with long leads (4” from the end of the knuckle) to facilitate wiring.

• Lighting fixtures are factory assem-bled and fully gasketed to ensure fast and easy installation.

• Complete installation instructions are provided with each item.

• In-Use covers include: patented inserts and comply with NEC® require-ments.

• Most of the boxes, covers, and lamp-holders are individually shrink wrapped, labeled and bar coded for ease of han-dling and identification.

• Lighting fixtures are individually boxed, labeled, and bar coded for ease of handling and identification.

• Well-marked outer boxes combined with shrink wrapping facilitate merchan-dising.

Materials:

• Boxes, Extensions, Covers, Lamp-holders, Lighting Fixtures, and Closure plugs: Zinc Die Cast.

• In-Use covers: polycarbonate.

• Lugs: Stamped Aluminum (One and two gang boxes), Integrally cast (round boxes).

• Cover screws: Plated Steel.

• Gaskets: Closed cell foam (covers), Fiber (lampholders), Closed cell foam or Fiber (lighting fixtures).

• Glass: Annealed glass.

• Sockets: Porcelain (lampholders and lighting fixtures).

Compliances:

• UL and cUL Listed.

Most of the boxes, covers, and lampholders are

individually shrink wrapped, labeled and bar coded

for ease of handling and identification.

Sturdy corrugated boxes with easy lift off top

facilitate merchandising.

FG3 FG3




Reproduced with permission of NFPA.

Capacity of Steel Boxes and Covers314.16 Number of Conductors in Outlet, Device, and Junction Boxes, and Conduit Bodies. Boxes and conduit bodies shall be of sufficient size to provide free space for all enclosed conductors. In no case shall the volume of the box, as calculated in 314.16(A), be less than the fill calculation as calculated in 314.16(B). The minimum volume for conduit bodies shall be as calculated in 314.16(C).

The provisions of this section shall not apply to terminal housings supplied with motors.

FPN: For volume requirements of motor terminal housings, see 430.12.

Boxes and conduit bodies enclosing conductors 4 AWG or larger shall also comply with the provisions of 314.28.

(A) Box Volume Calculations. The volume of a wiring enclosure (box) shall be the total volume of the assembled sections and, where used, the space provided by plaster rings, domed covers, extension rings, and so forth, that are marked with their volume or are made from boxes the dimensions of which are listed in Table 314.16(A).

(1) Standard Boxes. The volumes of standard boxes that are not marked with their volume shall be as given in Table 314.16(A).

(2) Other Boxes. Boxes 1650 cm3 (100 in.3) or less, other than those described in Table 314.16(A), and nonmetallic boxes shall be durably and legibly marked by the manufacturer with their volume. Boxes described in Table 314.16(A) that have a volume larger than is designated in the table shall be permitted to have their volume marked as required by this section.

Table 314.16(A) Metal Boxes

Box Trade Size Minimum Volume Maximum Number of Conductors*mm in. cm3 in.3 18 16 14 12 10 8 6

100 × 32 (4 × 1¼) round/octagonal 205 12.5 8 7 6 5 5 5 2

100 × 38 (4 × 1½) round/octagonal 254 15.5 10 8 7 6 6 5 3

100 × 54 (4 × 2) round/octagonal 353 21.5 14 12 10 9 8 7 4

100 × 32 (4 × 1¼) square 295 18.0 12 10 9 8 7 6 3

100 × 38 (4 × 1½) square 344 21.0 14 12 10 9 8 7 4

100 × 54 (4 × 2) square 497 30.3 20 17 15 13 12 10 6

120 × 32 (4 × 1¼) square 418 25.5 17 14 12 11 10 8 5

120 × 38 (4 × 1½) square 484 29.5 19 16 14 13 11 9 5

120 × 54 (4 × 2) square 689 42.0 28 24 21 18 16 14 8

75 × 50 × 38 (3 × 2 × 1½) device 123 7.5 5 4 3 3 3 2 1

75 × 50 × 50 (3 × 2 × 2) device 164 10.0 6 5 5 4 4 3 2

75 × 50 × 57 (3 × 2 × 2¼) device 172 10.5 7 6 5 4 4 3 2

75 × 50 × 65 (3 × 2 × 2½) device 205 12.5 8 7 6 5 5 4 2

75 × 50 × 70 (3 × 2 × 2¾) device 230 14.0 9 8 7 6 5 4 2

75 × 50 × 90 (3 × 2 × 3½) device 295 18.0 12 10 9 8 7 6 3

100 × 54 × 38 (4 × 2 × 1½) device 169 10.3 6 5 5 4 4 3 2

100 × 54 × 48 (4 × 2 × 1) device 213 13.0 8 7 6 5 5 4 2

100 × 54 × 54 (4 × 2 × 2) device 238 14.5 9 8 7 6 5 4 2

95 × 50 × 65 (3¾ × 2 × 2½) masonry box/gang 230 14.0 9 8 7 6 5 4 2

95 × 50 × 90 (3¾ × 2 × 3½) masonry box/gang 344 21.0 14 12 10 9 8 7 4

min. 44.5 depth FS — single cover/gang (1¾) 221 13.5 9 7 6 6 5 4 2

min. 60.3 depth FD — single cover/gang (2) 295 18.0 12 10 9 8 7 6 3

min. 44.5 depth FS — multiple cover/gang (1¾) 295 18.0 12 10 9 8 7 6 3

min. 60.3 depth FD — multiple cover/gang (2) 395 24.0 16 13 12 10 9 8 4

*Where no volume allowances are required by 314.16(B)(2) through (B)(5).

(B) Box Fill Calculations. The volumes in paragraphs 314.16(B)(1) through (B)(5), as applicable, shall be added together. No allowance shall be required for small fittings such as locknuts and bushings.

(1) Conductor Fill. Each conductor that originates outside the box and terminates or is spliced within the box shall be counted once, and each conductor that passes through the box without splice or termination shall be counted once. A looped, unbroken conductor not less than twice the minimum length required for free conductors in 300.14 shall be counted twice. The conductor fill shall be calculated using Table 314.16(B). A conductor, no part of which leaves the box, shall not be counted.

Exception: An equipment grounding conductor or conductors or not over four fixture wires smaller than 14 AWG, or both, shall be permitted to be omitted from the calculations where they enter a box from a domed luminaire (fixture) or similar canopy and terminate within that box.

(2) Clamp Fill. Where one or more internal cable clamps, whether factory or field supplied, are present in the box, a single volume allowance in accordance with Table 314.16(B) shall be made based on the largest conductor present in the box. No allowance shall be required for a cable connector with its clamping mechanism outside the box.

(3) Support Fittings Fill. Where one or more luminaire (fixture) studs or hickeys are present in the box, a single volume allowance in accordance with Table 314.16(B) shall be made for each type of fitting based on the largest conductor present in the box.

(4) Device or Equipment Fill. For each yoke or strap containing one or more devices or equipment, a double volume allowance in accordance with Table 314.16(B) shall be made for each yoke or strap based on the largest conductor connected to a device(s) or equipment supported by that yoke or strap.

Table 314.16(B) Volume Allowance Required per Conductor Free Space Within Box for Each Conductor Size of Conductor (AWG) cm3 in.3 18 24.6 1.50 16 28.7 1.75 14 32.8 2.00 12 36.9 2.25 10 41.0 2.50 8 49.2 3.00 6 81.9 5.00

(5) Equipment Grounding Conductor Fill. Where one or more equipment grounding conductors or equipment bonding jumpers enter a box, a single volume allowance in accordance with Table 314.16(B) shall be made based on the largest equipment grounding conductor or equipment bonding jumper present in the box. Where an additional set of equipment grounding conductors, as permitted by 250.146(D), is present in the box, an additional volume allowance shall be made based on the largest equipment grounding conductor in the additional set.

406.8 Receptacles in Damp or Wet Locations.

(B) Wet Locations.

(1) 15- and 20-Ampere Receptacles in a Wet Location. 15- and 20-ampere, 125- and 250-volt receptacles installed in a wet location shall have an enclosure that is weatherproof whether or not the attachment plug cap is inserted.

(2) Other Receptacles. All other receptacles installed in a wet location shall comply with (B)(2)(a) or (B)(2)(b).

(a) A receptacle installed in a wet location, where the product intended to be plugged into it is not attended while in use, shall have an enclosure that is weatherproof with the attachment plug cap inserted or removed.

(b) A receptacle installed in a wet location where the product intended to be plugged into it will be attended while in use (e.g., portable tools) shall have an enclosure that is weatherproof when the attachment plug is removed.

FG4 FG4




One Gang Weatherproof Outlet Boxes and Extensions Die Cast Metal. Closure plugs, ground screw and mounting lugs included.

Wiring Catalog Capacity Hub No. of Wt Per Case Number Depth (Cu. In.) Size Hubs Packaging 100 (lbs) Qty

WSL150* 2” 18.3 1⁄2” 4 Shrink Wrapped 61 20WSL175* 2” 18.3 3⁄4” 4 Shrink Wrapped 61 20

WSM150* 2” 18.3 1⁄2” 3 Shrink Wrapped 58 20WSM175* 2” 18.3 3⁄4” 3 Shrink Wrapped 57 20WSM110 2” 18.3 1” 3 Shrink Wrapped 56 20

WSP150* 2” 18.3 1⁄2” 5 Shrink Wrapped 60 20WSP175* 2” 18.3 3⁄4” 5 Shrink Wrapped 57 20

WSX150 2” 18.3 1⁄2” 5 Shrink Wrapped 60 20WSX175 2” 18.3 3⁄4” 5 Shrink Wrapped 60 20WSX110 2” 18.3 1” 5 Shrink Wrapped 60 20

WDM150* 25⁄8” 23.8 1⁄2” 3 Shrink Wrapped 108 12WDM175 25⁄8” 23.8 3⁄4” 3 Shrink Wrapped 108 12WDM110 25⁄8” 23.8 1” 3 Shrink Wrapped 108 12

WDX150 25⁄8” 23.8 1⁄2” 5 Shrink Wrapped 83 12WDX175 25⁄8” 23.8 3⁄4” 5 Shrink Wrapped 83 12WDX110 25⁄8” 23.8 1” 5 Shrink Wrapped 83 12

WE1* 1” 10.0 – – Shrink Wrapped 30 24

WEFX50* 11⁄2” 13.3 1⁄2” 4 Shrink Wrapped 58 12WEFX75* 11⁄2” 13.3 3⁄4” 4 Shrink Wrapped 67 12

WSL150WSL175

WSP150WSP175

WSM150WSM175WSM110

WDM150WDM175WDM110

WDX150WDX175WDX110

WSX150WSX175WSX110

WE1 Extension AdapterGasket and Screws

Included

WEFX50WEFX75Flanged

Extension AdapterGasket and Screws

Included

* Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time.

FG5 FG5




Dimensions: One Gang Boxes and Extensions

Catalog Number A B C D E F G H J

WSL150 49⁄16” 213⁄16” 2” 5⁄8” 31⁄16” 31⁄2” 31⁄4” 17⁄8” 11⁄2”WSL175 49⁄16” 213⁄16” 2” 5⁄8” 31⁄16” 31⁄2” 31⁄4” 17⁄8” 11⁄2”

WSM150 49⁄16” 213⁄16” 2” 5⁄8” 31⁄16” 31⁄2” 31⁄4” 17⁄8” –WSM175 49⁄16” 213⁄16” 2” 5⁄8” 31⁄16” 31⁄2” 31⁄4” 17⁄8” –WSM110 49⁄16” 213⁄16” 2” 5⁄8” 31⁄16” 31⁄2” 31⁄4” 17⁄8” –

WSP150 49⁄16” 213⁄16” 2” 5⁄8” 31⁄16” 31⁄2” 31⁄4” 17⁄8” 11⁄2”WSP175 49⁄16” 213⁄16” 2” 5⁄8” 31⁄16” 31⁄2” 31⁄4” 17⁄8” 11⁄2”

WSX150 49⁄16” 213⁄16” 2” 5⁄8” 31⁄16” 31⁄2” 31⁄4” 17⁄8” –WSX175 49⁄16” 213⁄16” 2” 5⁄8” 31⁄16” 31⁄2” 31⁄4” 17⁄8” –WSX110 49⁄16” 213⁄16” 2” 5⁄8” 31⁄16” 31⁄2” 31⁄4” 17⁄8” –

WDM150 49⁄16” 213⁄16” 25⁄8” 3⁄4” 31⁄16” 31⁄2” 31⁄4” 17⁄8” –WDM175 49⁄16” 213⁄16” 25⁄8” 3⁄4” 31⁄16” 31⁄2” 31⁄4” 17⁄8” –WDM110 49⁄16” 213⁄16” 25⁄8” 3⁄4” 31⁄16” 31⁄2” 31⁄4” 17⁄8” –

WDX150 49⁄16” 213⁄16” 25⁄8” 3⁄4” 31⁄16” 31⁄2” 31⁄4” 17⁄8” –WDX175 49⁄16” 213⁄16” 25⁄8” 3⁄4” 31⁄16” 31⁄2” 31⁄4” 17⁄8” –WDX110 49⁄16” 213⁄16” 25⁄8” 3⁄4” 31⁄16” 31⁄2” 31⁄4” 17⁄8” –

J

DC

B

H

GA

E

F

DC

EndViewOneOutlet

EndViewTwoOutlets

27/8"

39/32" 45/8" 51/4"

31/2"

29/16"

23/4"

ExtensionWE1

Flanged Extension AdapterWEFX50WEFX75

Extensions and Extension Adapters are used to provide additional capacity needed for NEC box fill requirements.

Adapters allow installer to add “take-offs” to new boxes and/or devices.

End View One Outlet

End View Two Outlets

D

J

DC

B

H

GA

F

C

E

2 7⁄8

5 1⁄4

2 9⁄16

3 9⁄32 2 3⁄44 5⁄8

3 1⁄2

FG6 FG6




Two Gang Weatherproof Outlet Boxes and ExtensionsDie Cast Metal. Closure plugs, ground screw and mounting lugs included.


WSK250 2” 30.5 1⁄2” 7 Shrink Wrapped 108 12WSK275 2” 30.5 3⁄4” 7 Shrink Wrapped 108 12

WSL250* 2” 30.5 1⁄2” 4 Shrink Wrapped 108 12WSL275* 2” 30.5 3⁄4” 4 Shrink Wrapped 108 12

WSM250* 2” 30.5 1⁄2” 3 Shrink Wrapped 108 12WSM275* 2” 30.5 3⁄4” 3 Shrink Wrapped 108 12WSM210* 2” 30.5 1” 3 Shrink Wrapped 108 12

WSP250* 2” 30.5 1⁄2” 5 Shrink Wrapped 108 12WSP275* 2” 30.5 3⁄4” 5 Shrink Wrapped 108 12

WSR250 2” 30.5 1⁄2” 6 Shrink Wrapped 108 12WSR275 2” 30.5 3⁄4” 6 Shrink Wrapped 108 12

WST250 2” 30.5 1⁄2” 7 Shrink Wrapped 108 12WST275 2” 30.5 3⁄4” 7 Shrink Wrapped 108 12

WSX250 2” 30.5 1⁄2” 5 Shrink Wrapped 108 12WSX275 2” 30.5 3⁄4” 5 Shrink Wrapped 108 12WSX210 2” 30.5 1” 5 Shrink Wrapped 108 12

WDK250 25⁄8” 40.3 1⁄2” 7 Shrink Wrapped 117 6WDK275 25⁄8” 40.3 3⁄4” 7 Shrink Wrapped 117 6WDK210 25⁄8” 40.3 1” 7 Shrink Wrapped 117 6

WDP250 25⁄8” 40.3 1⁄2” 5 Shrink Wrapped 117 6WDP275 25⁄8” 40.3 3⁄4” 5 Shrink Wrapped 117 6WDP210 25⁄8” 40.3 1” 5 Shrink Wrapped 117 6

WE2* 1” 16.3 — — Shrink Wrapped 33 12

WSK250WSK275

WSL250WSL275

WSM250WSM275WSM210

WE2WDP250WDP275WDP210

WSP250WSP275

WSR250WSR275

WDK250WDK275WDK210

WSX250WSX275WSX210

WST250WST275


FG7 FG7




Dimensions: Two Gang Boxes and Extensions

Catalog Number A B C D E F G H J K L

WSK250 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” – – 31⁄4”WSK275 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” – – 31⁄4”

WSL250 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” 11⁄2” – 31⁄4”WSL275 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” 11⁄2” – 31⁄4”

WSM250 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” – – 31⁄4”WSM275 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” – – 31⁄4”WSM210 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” – – 31⁄4”

WSP250 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” 11⁄2” – 31⁄4”WSP275 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” 11⁄2” – 31⁄4”

WSR250 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” 11⁄2” – 31⁄4”WSR275 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” 11⁄2” – 31⁄4”

WST250 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” – 11⁄2” 31⁄4”WST275 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” – 11⁄2” 31⁄4”

WSX250 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” – – 31⁄4”WSX275 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” – – 31⁄4”WSX210 49⁄16” 45⁄18” 2” 5⁄8” 5” 37⁄8” 311⁄16” 33⁄4” – – 31⁄4”

WDK250 49⁄16” 45⁄18” 25⁄8” 3⁄4” 5” 37⁄8” 311⁄16” 33⁄4” 11⁄2” – 31⁄4”WDK275 49⁄16” 45⁄18” 25⁄8” 3⁄4” 5” 37⁄8” 311⁄16” 33⁄4” 11⁄2” – 31⁄4”WDK210 49⁄16” 45⁄18” 25⁄8” 3⁄4” 5” 37⁄8” 311⁄16” 33⁄4” 11⁄2” – 31⁄4”

WDP250 49⁄16” 45⁄18” 25⁄8” 3⁄4” 5” 37⁄8” 311⁄16” 33⁄4” 11⁄2” – 31⁄4”WDP275 49⁄16” 45⁄18” 25⁄8” 3⁄4” 5” 37⁄8” 311⁄16” 33⁄4” 11⁄2” – 31⁄4”WDP210 49⁄16” 45⁄18” 25⁄8” 3⁄4” 5” 37⁄8” 311⁄16” 33⁄4” 11⁄2” – 31⁄4”



ExtensionWE2

B

GA

H

LF

E

DC

J

K

K

35/8"

45/8"

45/8"

33/4"

1"

J

K

FL

B

H

AG

E

DC

K

1”

33⁄4

45⁄8

35⁄8

45⁄8

FG8 FG8




Round Weatherproof Outlet Boxes and Extensions Die Cast Metal. Closure plugs, ground screw and mounting lugs included.

WRX50WRX75

WRX50CGWRX75CGCover and gasket included

WRX50WRX75WRX50CGWRX75CG

WERX50WERX75Extension

ExtensionWERX50WERX75

2 3/4"

3 1/2"23

/4"31

/2"

19/16"

45/16"

3/4"

19/16"

45/16"

3/4"3 1/2"

23/4"

31/2"

415 /16

"

55/8"


WRX50* 2” 16.5 1⁄2” 5 Shrink Wrapped 75 16WRX75* 2” 16.5 3⁄4” 5 Shrink Wrapped 75 16

WRX50CG* 2” 16.5 1⁄2” 5 Shrink Wrapped 75 16WRX75CG* 2” 16.5 3⁄4” 5 Shrink Wrapped 75 16

WERX50 2” 18.3 1⁄2” 4 Shrink Wrapped 56 18WERX75 2” 18.3 3⁄4” 4 Shrink Wrapped 56 18

Dimensions:




31 ⁄2

415 ⁄16

55 ⁄8

45⁄16

19⁄16

23 ⁄4 2 3⁄4

3 1⁄2

3⁄4

23 ⁄4

3 1⁄2

45⁄16

19⁄16

3⁄4

31 ⁄2

FG9 FG9




Weatherproof LampholdersDie cast construction. Locking swivel knuckle permits lamp positioning and aiming. Supplied with porcelain sockets, gaskets, extra long leads, locknut and other hardware. For aiming horizontal or downward. For use with 150W maximum lamps.

WLU1WLI

WL68

Catalog No. Description Color Packaging Wt. Per 100 Case Qty

WLU1 Unfinished Lampholder Metal Boxed 50 50

WLI* Finished Lampholder Grey Shrink Wrapped 52 27

WL68* Lampholder w/51⁄8” hood Grey Boxed 117 6

Dimensions:


51/4"

67/8"

WL68

51⁄4”

67⁄8”

3"

31/2"

WLU1WLI

3”

31⁄2”

FG10 FG10




One Gang Weatherproof CoversDie Cast Metal. Gasket and mounting hardware included.

WC1150 WC1250 WC1350

WC11L

For horizontal to downward aiming (For use with 150W max. lamp)

WCB14WCB1 WCT1 WCT115WCT113

Catalog For use Wt Per CaseNumber Description Orientation with devices Color Packaging 100 (lbs) Qty

WCB1* Blank Cover, 2-screws Universal — Grey Shrink Wrapped 10 42 (Stamped Aluminum)

WCB14* Blank Cover, 4-screws Universal — Grey Shrink Wrapped 10 42 (Stamped Aluminum)

WCT1* Toggle Switch Cover Vertical Switch (10A - 20A) Grey Shrink Wrapped 25 20

WCT115* Toggle Switch Cover Vertical Switch (15A, 1-pole) Grey Shrink Wrapped 56 18 w/switch included

WCT113* Toggle Switch Cover Vertical Switch (15A, 3 Way) Grey Shrink Wrapped 56 18 w/switch included

WCE1 Cover with Photocell Universal Photocell (120A, 300W) Grey Shrink Wrapped 30 10 (Stamped Aluminum) included

WC1150* Raised Cover, one Universal 1 Photocell or Grey Shrink Wrapped 30 20 1⁄2” hub lampholder

WC1250* Raised Cover, two Universal 2 Photocells or Grey Shrink Wrapped 30 20 1⁄2” hubs lampholders

WC1350* Raised Cover, three Universal 3 Photocells or Grey Shrink Wrapped 30 20 1⁄2” hubs lampholders

WC11L* Raised Cover, one 1⁄2” Universal 1 Lampholder Grey Shrink Wrapped 81 8 hub with lampholder included

WC12L* Raised Cover, two 1⁄2” Universal 2 Lampholders Grey Shrink Wrapped 125 8 hubs with lampholders included


WC12L

WCE1

On

Off

On

Off

FG11 FG11




Dimensions: One Gang Covers

WCB1

213⁄16”

39⁄32” 49⁄16”

WCB14WCT1WCT113WCT115

213⁄16”

17⁄8”

31⁄4” 49⁄16”

213⁄16”

21⁄2” 49⁄16”

WC1350WC12L

WC1250WC1150WC11L

41⁄2”

27⁄8”

41⁄2” 41⁄2”

27⁄8” 27⁄8” 11⁄16”

WCE1

213⁄16”

39⁄32” 49⁄16”

FG12 FG12

Effective November, 2011Copyright 2011



One Gang Weatherproof Covers and In-Use Covers Die Cast Metal. Gasket and mounting hardware included.

WVS1WVP211WVP161

WHS1

Catalog Wt Per CaseNumber Description Orientation For use with devices Color Packaging 100 (lbs) Qty

WVS1* Self Closing Cover Vertical Single Recept or Switch Grey Shrink Wrapped 33 24

WHS1* Self Closing Cover Horizontal Single Recept or Switch Grey Shrink Wrapped 33 24

WVP211 Self Closing Power Outlet Vertical Single Recept (20A-50A) Grey Shrink Wrapped 63 24 Cover (2.125” opening)

WVP161 Self Closing Power Outlet Vertical Single Recept Grey Shrink Wrapped 63 24 Cover (1.625” opening) (20A or 30A)

WVP21L1† Self Closing Power Outlet Vertical Single Recept (20A-50A) Grey Shrink Wrapped 75 24 Cover (2.125” opening)

WCIU1‡ In-Use Cover, 27⁄8” Universal — Clear Shrink Wrapped 49 6 deep (Polycarbonate)

WCDIU1‡ In-Use Cover, 31⁄2” Universal — Clear Shrink Wrapped 46 4 deep (Polycarbonate)

* Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time.† Hasp diameter 3/16”. Lock not included.

‡ Provided with inserts, devices not included.

WVP21L1WCIU1

(In-Use cover)

WCDIU1(In-Use deep cover)

FG13 FG13




DiameterWVP211 2.125”WVP161 1.625” WVP21L1 2.125”

WHS1

DIA.

Dimensions: One Gang Covers and In-Use Inserts

WCIU1 and WCDIU1 Inserts 3 inserts produce 14 configurations

Single gang In-Use inserts can be used in both vertical and horizontal applications, by simply changing the hinge points.

23⁄8”

213⁄16”

23⁄8”49⁄16”

213⁄15”

213⁄16”

49⁄16”

313⁄16”

49⁄16”

DiameterWVS1 2.125”

DIA.Diameter1.475”

FG14 FG14




One Gang Weatherproof Covers Die Cast Metal. Gasket and mounting hardware included.

WVD1

WHG1

WVG1

WVDL1

WHD1WRCover and Receptacle


WVD1* Self Closing Cover Vertical Duplex Recept or Switch Grey Shrink Wrapped 33 24

WVDL1† Self Closing Cover Vertical Duplex Recept or Switch Grey Shrink Wrapped 33 24

WHD1* Self Closing Cover Horizontal Duplex Recept or Switch Grey Shrink Wrapped 42 24

WHDO1* Stay Open Cover Horizontal Duplex Recept or Switch Grey Shrink Wrapped 42 24

WHD1WR* Self Closing Horizontal Duplex Recept Grey Shrink Wrapped 67 18 Cover w/recept (15A, 120V) incl.

WHG1* Self Closing Cover Horizontal GFCI Grey Shrink Wrapped 50 24

WVG1* Self Closing Cover Vertical GFCI Grey Shrink Wrapped 50 24

WHD1WHDO1 (Stay Open)


† Hasp diameter 3/16”. Lock not included.

FG15 FG15




Dimensions: One Gang Covers

WVD1WVDL1

213⁄16”

49⁄16”

WHD1WHDO1WHD1WR

41⁄2”

23⁄4”

WHG1

213⁄16”

313⁄16”

49⁄16”

221⁄32”

111⁄32”

WVG1

213⁄16”

313⁄16”

49⁄16”

221⁄32”

111⁄32”

FG16 FG16




Two Gang Weatherproof Covers Die Cast Metal. Gasket and mounting hardware included.

WVTG2 WVTT2

WCB24 WVSG2 WVDG2 WVGG2


WCB24* Blank Cover Universal – Grey Shrink Wrapped 13 24 (Stamped Aluminum)

WVSG2* Self Closing Cover Vertical Single Recept + GFCI Grey Shrink Wrapped 50 18

WVDG2* Self Closing Cover Vertical Duplex Recept + GFCI Grey Shrink Wrapped 50 18

WVGG2* Self Closing Cover Vertical 2 GFCI Grey Shrink Wrapped 50 18

WVTG2* Self Closing Cover Vertical Switch (10 A - 20A) + GFCI Grey Shrink Wrapped 50 18

WVTT2* Toggle Switch Cover Vertical 2 Switches (15A - 20A) Grey Shrink Wrapped 46 24 (Stamped Aluminum)

WVTT215 Toggle Switch Cover Vertical 2 Switches (15A, 1-Pole) incl. Grey Shrink Wrapped 89 18 (Stamped Aluminum) with switches

WVTT213 Toggle Switch Cover Vertical 2 Switches (15A, 3-way) incl. Grey Shrink Wrapped 89 18 (Stamped Aluminum) with switches

WVTT220 Toggle Switch Cover Vertical 2 Switches (20A, 1-Pole) incl. Grey Shrink Wrapped 89 18 (Stamped Aluminum) with switches

WVTT215WVTT213WVTT220


FG17 FG17




Dimensions: Two Gang Covers

WVDG2

49⁄16”

49⁄16”35⁄8”

111⁄32”

WVSG2

49⁄16”

49⁄16”

35⁄8”

111⁄32”

221⁄32”

WCB24

49⁄16”

49⁄16”39⁄32”

113⁄16”

WVGG2

49⁄16”

49⁄16”

35⁄8”

221⁄32”

111⁄32”

WVTG2

49⁄16”

49⁄16”

221⁄32”

111⁄32”

23⁄8”

WVTT2 , WVTT2 15WVTT213 , WVTT2 20

49⁄16”

49⁄16”

39⁄32”23⁄8”

FG18 FG18

Effective November, 2011Copyright 2011



Two Gang Weatherproof Covers and In-Use CoversDie Cast Metal. Gasket and mounting hardware included.

WVDD2

WVSS2WCIU2

(In-Use Cover ONLY)

WVSD2


WVDD2* Self Closing Cover Vertical 2 Duplex Recept or Switches Grey Shrink Wrapped 56 18

WVSD2* Self Closing Cover Vertical Single Recept + Duplex Recept Grey Shrink Wrapped 61 18

WVSS2* Self Closing Cover Vertical 2 Single Recept or Switches Grey Shrink Wrapped 56 18

WCIU2‡ In-Use Cover, 25⁄8” Vertical – Clear Shrink Wrapped 56 6 Deep (Polycarbonate)


‡ Provided with inserts, devices not included.

FG19 FG19




Dimensions: Two Gang Covers and In-Use Inserts

49/16"

49/16"

113/16"

49/16"

49/16"

113/16"

23/8"

WVDD2WVSD2

WCIU2 Inserts– 6 inserts produce 70 configurationsTwo gang In-Use convertible inserts snap together to create combinations for almost every application.

49⁄16”

49⁄16”

49⁄16”

49⁄16”

113⁄16” 113⁄16”

49/16"

49/16"

113/16"

23/8" 49/16"

WVSS2

49⁄16”

49⁄16”

113⁄16”

23⁄8”

23⁄8”

FG20 FG20




Round Weatherproof CoversDie Cast Metal. Gasket and mounting hardware included. Lampholders are adjustable. Porcelain sockets.

WCBR

WCR2L WCRD2LWFor use with 150W max. lamp

WCR150 WCR250 WCR350


WCBR* Blank Cover, 4” OD Universal — Grey Shrink Wrapped 20 50 (Stamped Aluminum)

WCR150* Raised Cover, Universal 1 Photocell or lampholder Grey Shrink Wrapped 42 24 One 1⁄2” hub

WCR250* Raised Cover, Universal 2 Photocells or lampholders Grey Shrink Wrapped 42 24 Two 1⁄2” hubs

WCR350* Raised Cover, Universal 3 Photocells or lampholders Grey Shrink Wrapped 42 24 Three 1⁄2” hubs

WCR2L* Raised Cover, two 1⁄2” Universal 2 Lampholders included Grey Shrink Wrapped 131 8 hubs with lampholders

WCRD2LW Ceiling plate (deep) Universal 2 Lampholders included White Boxed 175 8 with lampholders


For horizontal to downward aimingFor use with 150W max. lamp Box not included

FG21 FG21




31/2"

9/16"

41/2"

23/4"

Additional knock-outsprovided for mounting

to 31/2" Round box.

31/2"

41/4"

31/2"

23/4"

31/2"

23/4"

WCBRWCR150

WCR250

Dimensions: Round Covers

31⁄2”

31⁄2”

41⁄4”

23⁄4”

31⁄2”

9⁄16”

41⁄2”

41/2"

51/2"

3/16"Hole

53/16"

1"

WCRD2LW

3⁄16” Hole

53⁄16”

1”

41⁄2”

51⁄2”

23⁄4” 23⁄4”

31⁄2”

Additional knock-outs provided for mounting to 31⁄2” Round box.

WCR350, WCR2L

FG22 FG22




Weatherproof Incandescent FixturesRugged, seamless die cast construction. Factory assembled with guard, 120Volt rated. Ground screw, closure plugs and mounting lugs included. Use with 150°C supply wire. Use with medium base incandescent lamps. Grey color.

WFA1050GWFA1075GWFA2050GWFA2075G

WFC1050GWFC1075GWFC2050GWFC2075G

WFW1050GWFW1075GWFW2050GWFW2075G

Catalog Mounting No. of Wt per Case Number Style Hub Size Hubs Wattage Packaging 100 (lbs) Qty

WFA1050G Pendant 1⁄2” 1 100 Boxed 267 1




WFC1050G Ceiling 1⁄2” 5 100 Boxed 267 1




WFW1050G Wall 1⁄2” 5 100 Boxed 380 1

WFW1075G Wall 3⁄4” 5 100 Boxed 380 1

WFW2050G Wall 1⁄2” 5 200 Boxed 510 1

WFW2075G Wall 3⁄4” 5 200 Boxed 510 1

FG23 FG23




Dimensions: Incandescent Fixtures

B D

AC

B

D

AC

F

E

B D

AC

Catalog Number A B C D

WFA1050G 311⁄16” 83⁄16” 41⁄4” 95⁄8”WFA1075G 311⁄16” 83⁄16” 41⁄4” 95⁄8”WFA2050G 43⁄8” 101⁄2” 51⁄2” 11”WFA2075G 43⁄8” 101⁄2” 51⁄2” 11”

Catalog Number A B C D

WFC1050G 311⁄16” 85⁄8” 41⁄4” 91⁄8”WFC1075G 311⁄16” 85⁄8” 41⁄4” 91⁄8”WFC2050G 43⁄8” 101⁄2” 51⁄2” 103⁄4”WFC2075G 43⁄8” 101⁄2” 51⁄2” 103⁄4”

Catalog Number A B C D E F

WFW1050G 311⁄16” 71⁄4” 41⁄4” 73⁄4” 41⁄2” 41⁄4”WFW1075G 311⁄16” 71⁄4” 41⁄4” 73⁄4” 41⁄2” 41⁄4”WFW2050G 43⁄8” 83⁄4” 51⁄2” 91⁄4” 41⁄2” 41⁄2”WFW2075G 43⁄8” 83⁄4” 51⁄2” 91⁄4” 41⁄2” 41⁄2”

B

D

AC

D

B

CA

B

D

F

E

CA

FG24 FG24




AccessoriesCatalog Electrical Wt. Per Case Number Rating Description Color Packaging 100 (lbs) Qty

WSWITCH 120 Volt, 5 Amp Automated Door Metal Shrink Wrapped 10 24 Operated Light Switch

WPHOTO 120 Volt, 300 Watt Photoelectric Night — Shrink Wrapped 13 24 Switch with Time Delay for Lamp Posts

WPHOTO50 120 Volt, 300 Watt Photoelectric Night Grey Shrink Wrapped 29 24 Switch with Time Delay 1⁄2” NPT w/locknut

WGD — Guard for Floodlight, Fits Chrome Shrink Wrapped 50 5 WLI and WLU1 Lampholders

Weatherproof Accessories and Replacement Parts

WSWITCH WGD

Replacement PartsCatalog Wt Per CaseNumber Description Color Packaging 100 (lbs) Qty

WGSK1 Universal 1 gang gasket Black Shrink Wrapped 4 50

WGSK2 Universal 2 gang gasket Black Shrink Wrapped 2 50

WGSKD1 1 gang gasket, single and Black Shrink Wrapped 2 50 duplex covers

WGSKEL External lampholder gasket Black Shrink Wrapped 6 50

WGSKIL Internal lampholder gasket Black Shrink Wrapped 0.3 600

WGSKR Universal round gasket Black Shrink Wrapped 2 50

WLUGS 2 Mounting lugs w/ screws Grey Boxed 1 100

WPLG104* 4–1” Closure Plugs Grey Shrink Wrapped 18 50

WPLG504* 4–1⁄2” Closure Plugs Grey Shrink Wrapped 8 75

WPLG754* 4–3⁄4” Closure Plugs Grey Shrink Wrapped 12 50

WSCR832 Ground Screw, Self Tapping, Green Boxed 0.52 100 #8-32 x 1⁄4”

WSOCKET Porcelain socket Grey Boxed 12 25

WFG1 Heavy duty wire guard for — Boxed 80 5 100 watt fixtures, #8 AWS

WFG2 Heavy duty wire guard for — Boxed 100 1 200 watt fixtures, #8 AWS

WFGL1 Glass globe for 100 watt — Boxed 150 1 lighting fixtures

WFGL2 Glass globe for 200 watt — Boxed 200 1 lighting fixtures

* Catalog number shown represents grey color. White (Suffi x W) and Bronze (Suffi x B) also available. Consult factory for lead time.

WPHOTO50WPHOTO

fg2 fg2 weatherproof boxes, covers, lampholders & lighting … · 2019. 2. 4. · features and...

Documents