first general catalogue

catalog 2012

WISE DECISION

catalog 2013

2 Products labeled with (*) are avaible only by special order.CATALOG 2013

FIRŠT COMPANY PROFILE – GENERALThe history of this successful company dates back to 1975 when Mr. and Mrs. FIRŠT, started their first workshop in Radegunda at Mozirje. They soon installed state-of-the-art equipment to enable production of all necessary components of the products manufactured by FIRŠT in those early days. The first major step for the workshop was the development of actuators for grill ovens for Gorenje household appliances. Alongside development and investment, innovation and development of own products grew as well, which enabled FIRŠT to make their mark on the demanding European market.Today, FIRŠT boasts a new fabrication plant in Velenje, which allows coordinated production of more than 50 different products under own brand name. All these products are a result of own know-how, R&D projects and experience. FIRŠT has its own R & D section developing numerous state-of-the-art innovations some of which have also been patented.FIRŠT is gradually becoming a more and more renowned manufacturer of control elements for heating systems in Slovenia and abroad. At the same times we are also becoming an increasingly important supplier of own products to numerous European manufacturers of heating systems. Such ambitions, however, call for good equipment, consistent compliance with many stringent requirements imposed by foreign markets, use of environmentally friendly materials, and ensuring quantities, delivery terms and high quality of supplied products. We have been successfully meeting those demands due to our organisation of production, state-of-the-art equipment, ongoing investment into new skills and equipment, and last not least due to the expertise, qualifications and motivation of all our employees. At FIRŠT, we are well aware that our customers’ expectations are growing on a daily basis. Consequently, features and the presentation of finished products are being tailored to customer wants and needs. In addition, we also carry out regular and comprehensive evaluations of applicability and quality of FIRŠT products.It is precisely due to our many years of experience with all the regulations of the European market that we were ready for Slovenia’s accession to the European Union. Our products have been certified by the national Institute of Slovenian Quality as well as by the European notified bodies TÜV and VDE.All of our products have been designed and manufactured in accordance with international standards and certified by European institutions, and comply with the provisions of Low-Voltage Directive, as well as electromagnetic compatibility. Our product range includes the following groups of products: room thermostats, differential thermostats, control panels for home heating appliances, electric motor operated brass mixing- and control valves, electric motor actuators for 3 point and modulating control, two and three-way ball valves with electromotor actuator, electromotor valves for special applications: for cooling mediums, with modulation control, with inbuilt timer and featuring different power supply voltages.We also manufacture motors for butterfly valves and actuators for grill ovens.Product quality and customer confidence are also evident from our references, which include demanding Slovenian and foreign customers, and numerous international awards received for our products.FIRŠT products excel by their wide range of application for industrial purposes as well as specific applications. In particular, this is the case when it comes to irrigation systems, central heating systems – also in combination with solar panels, cooling systems, or in the supply and distribution of liquid mediums in more complex industrial processes. They can be used in infinite combinations and provide users with optimum control over the consumption of energy or water, over temperature or any other parameters the user wants to control. Education and training of own staff and associates is a priority at FIRŠT. We have a state-of-the-art training room featuring all the tools and equipment required for detailed, quality training sessions and seminars conducted by our specialists. It is the place where trade associations, design engineers, sales staff, fitters, and service and maintenance personnel are acquiring additional skills and expertise.Welcome to FIRŠT Velenje, where you will be received by our specialists working in various areas of our business. With their help you will be able to solve any problem, get the answers to all your questions and find an innovative solution to translate your ideas into practice.

3Products labeled with (*) are avaible only by special order. CATALOG 2013

FIRŠT COMPANY PROFILE – GENERAL .....................................................2

I. ROOM THERMOSTATS ELTHERM TT6 ........................................................................................4 ELTHERM AD24 ......................................................................................5 ELTHERM TT8 ........................................................................................6

II. HEATING CONTROLLERS ROTOTERM MR-TR “plus” ......................................................................7 ROTOTERM MR-NP “plus” .....................................................................8 ROTOTERM MR-B/T ...............................................................................9 ROTOTERM MR-B ..................................................................................9 UNI TEMP ..............................................................................................10 ROTO TEMP ......................................................................................... 11 UNI TEMP GF3 ......................................................................................12 UNI TEMP, ROTO TEMP - Applications ................................................13 UNI TEMP 690 .......................................................................................14

III. ACCESSORIES Room unit for controllers Rototerm ........................................................15 Sensors .................................................................................................15 Mounting accessories ............................................................................15

IV. DIFFERENTIAL THERMOSTATS DTC 200/2G ......................................................................................... 16 DTC 200/4 .............................................................................................17 DTC 100/2 .............................................................................................18 DTC 100/2 TDG .....................................................................................19 DTC 100/4TD ........................................................................................20 Accessories ...........................................................................................21 DTC 500 ................................................................................................22

V .ROTARY MIXING VALVES ROTARY BRASS MIXING VALVES ROTOMIX F3, F4 .........................24 CAST IRON MIXING VALVE ROTOMIX G ............................................26

VI. THERMIC MIXING VALVES Cast iron thermic valve T-MIX................................................................27

VII. COMPACT ROTARY ACTUATOR WITH MIXING VALVES EUROMIX F3, EUROMIX F4 .................................................................28 EUROMIX G F3, EUROMIX G F4 .........................................................30

VIII. ELECTRIC ACTUATORS FOR ROTARY MIXING VALVES MV 120/09E ...........................................................................................31 MV 120/210 ...........................................................................................31 MV 120/360 ...........................................................................................32 MV 120..EUROMIX ...............................................................................32 MV 120..4417 COMP MOD ...................................................................33 UNI 3P ...................................................................................................34 Adapter kit and accessories ..................................................................34

IX. ROTARY DIVERTER VALVES Brass diverter valve DIVERT F3L ..........................................................35 Cast iron diverter valve DIVERT G F3L .................................................35 X. COMPACT ROTARY ACTUATOR WITH DIVERTER VALVE EMV 110 ROTODIVERT-M ....................................................................36 EMV 110 ROTODIVERT G ....................................................................38 ROTODIVERT FB– EMV110 series 630, 631 – 3-way ball way ............39 ROTODIVERT FC – EMV110 series 526/89i0 – 3-way diverter valve ...40

XI. ELECTRIC ACTUATORS FOR ROTARY DIVERTER VALVES EMV 110..4380 ROTODIVERT-M ..........................................................41 UNI D2P.................................................................................................41 Adapter kit for DIVERT and EMV 110..4680 ..........................................41

INDEX

XII. ELECTRIC MOTOR ACTUATED BALL VALVES EMV110 series 502/503.........................................................................42 EMV110 series 602/603.........................................................................43 EMV110 series 800/801.........................................................................44 EMV110 series 820................................................................................46 UNI 2P 859 ............................................................................................47 EMV 110 series 602/1590 B ..................................................................48

XIII. PROGRAMMABLE MOTORIZED BALL VALVE DIGI 111 .................................................................................................49 TEC 44 ..................................................................................................50

XIV. 3-WAY ELECTRIC MOTOR ACTUATED BALL VALVES EMV 110 series 710 – L shaped ball valve – vertical version ...............51 UNI 2P series 710 – L shaped ball valve – vertical version ...................52 EMV 110 - series 830 – T shaped ball valve – horizontal version ........53 UNI 3P - series 830 – T shaped ball valve – horizontal version ...........54 EMV 110 - series 930 – T shaped ball valve – horizontal version ........55

XV. ELECTRIC MOTOR ACTUATED BALL VALVES FOR COOLING SYSTEMS EMV 110 - series 800 HL ......................................................................56 EMV 110 - series 820 HL ......................................................................56 UNI 2P - series 800 HL .........................................................................57

XVI. 3-WAY ELECTRIC MOTOR ACTUATED BALL VALVES FOR COOLING SYSTEMS EMV 110 - series 710 HL ......................................................................58 EMV 110 - series 830 HL, 930 HL ........................................................58 UNI 2P - series 710 HL .........................................................................59

XVII. ELECTRIC ACTUATORS FOR BALL VALVES EMV 110..electric motor actuators .........................................................60 UNI 2P ...................................................................................................60 UNI 3P ...................................................................................................61

XVIII. Adapter kits, accessories UNI 3P 690 ............................................................................................62

XIX. ELECTRIC ACTUATORS FOR BALL VALVES UNI MOD 690 ........................................................................................63 Adapter set for valves series 690 ..........................................................63 UNI MOD X 690 .....................................................................................64 UNI MOD X ............................................................................................65 UNI 2P 35I, UNI 3P 35I ..........................................................................66

XX. ELECTRIC MOTOR ACTUATED STAINLESS STEEL BALL VALVES UNI 3P 35IM ..........................................................................................67 UNI MOD 35IM ......................................................................................68 Adapter set ............................................................................................68 UNI MOD X 35IM ...................................................................................69

CONTACT ....................................................................................................70

Certificates ....................................................................................................71


I. ROOM THERMOSTATS

ELTHERM TT6

Eltherm TT6 room thermostat is designed for radiator, convector or fan heating in domestic or light commercial premises. It may also be used for zone temperature controlling in large buildings.Temperature control is based on the measurement of room temperature. Eltherm TT6 room thermostat with LCD display provides time-programmed control of room temperatures.

Features:• Simple use and easy installation• Digital display (time, day, temperature, status of program )• Program options:

• Lower/night - economic temperature• Higher/day - comfort temperature • Weekly program timer for each day (hourly setting)

• Battery status indicator• Heating-off function in case of empty batteries• Manual settings for constant heating temperature

Characteristics:• Battery power supply - 3x AA (LR6 – alkaline) • Output: potencial-free relay SPDT• Output relay rating: 16(10)A, 250VAC, 50Hz• Room temperature setting range: 5 - 35°C• Hysteresis of thermostat: ±0,5K• Dimensions: 138x86x24mm• Weight: 0,28kg

Code Description

20066 ELTHERM TT6 digital thermostat with a weekly timer

Electrical connection


I. ROOM THERMOSTATS

ELTHERM AD24

Eltherm AD24 room thermostat is designed for radiator, convector or fan heating in domestic or light commercial premises. It may also be used for zone temperature controlling in large buildings.Temperature control is based on the measurement of room temperature. Eltherm AD24 room thermostat with digital display provides time-programmed control of room temperatures.

Features:• Digital display of the temperature in the room• Daily analog program timer• Four modes of operation:

• Protection against freezing• non-stop working on lower - economic temperature• non-stop working on higher - comfort temperature• automatic working according set program

• Time and day display• Direct control of rotary actuator for mixing valve, electro motor

ball valve, circulation pump, burner, compressor or heating pump, cooling device

• Thermostat is compatible with electric motor actuated ball valves series EMV110 and rotary actuators for mixing valves series UNI 3P, MV120…

Characteristics:• Battery power supply - 3x AA (LR6 – alkaline) • Output: relay SPDT• Output relay rating: 1(1)A, 230VAC, 50Hz• Room temperature setting range: 5 - 30°C• Hysteresis of thermostat: ±1K• Weight: 0,3kg

Code Description

27099 ELTHERM AD24 thermostat with daily timer



I. ROOM THERMOSTATS

ELTHERM TT8

Eltherm TT8 room thermostat is designed for radiator, convector or fan heating in domestic or light commercial premises. It may also be used for zone temperature controlling in large buildings.Temperature control is based on the measurement of room temperature. Eltherm TT8 room thermostat with digital display provides time-programmed control of room temperatures.

Features:• Digital display of the temperature in the room• Weekly program timer for each day or group of days• Three modes of operation:

• non-stop working on lower - economic temperature• non-stop working on higher - comfort temperature• automatic working according set program

• Time and day display• Direct control of rotary actuator for mixing valve, electro motor

ball valve, circulation pump, burner, compressor or heating pump, cooling device

• Thermostat is compatible with electric motor actuated ball valves series EMV110 and rotary actuators for mixing valves series UNI 3P, MV120…

Characteristics:• Battery power supply - 3x AA (LR6 – alkaline) • Output: relay SPDT• Output relay rating: 1(1)A, 250VAC, 50Hz• Room temperature setting range: 5 - 30°C• Hysteresis of thermostat: ±1K• Weight: 0,32 kg

Code Description

27098 ELTHERM TT8 Thermostat with digital weekly timer



II. HEATING CONTROLLERS

ROTOTERM MR-TR “plus”

ROTOTERM MR-TR “plus” is weather compensating central heating controller. It is designed to regulate the radiator or underfloor heating. The controller is 3-point (PID) temperature controller of heating water, which works as a function of external temperature, and in conjunction with the room correction unit, allows remote room temperature adjustment. The controller is built in microprocessor technology and meets the latest quality standards. It offers a wide variety of programming options, allowing optimal controller settings for the selected object.

Features:• LED’s indicate control output status• Output for controlling motor actuator for mixing valves (UNI 3P,

MV120) and circulation pump• Pump and valve exercise (every 72h for 30s) which helps

prevent sticking during long periods of inactivity• Service switch to assist installer on start-up and technician

during service• Sensors fault status on digital display• Factory set default parameters• Digital setting of all parameters• Temperature enquiry (outer, boiler, underfloor, mixed flow) on

digital display

Characteristics:• Supply voltage: 230VAC, 50Hz• Power consumption: max.4VA• Power supply of users: 1(1)A, 230VAC, 50Hz• Room temperature setting range: 5 - 25°C• Heat curve ratio adjustment: 0,1 - 2°C• Heat curve parallel shift adjustment: +/- 10°C • Room unit influence (AS/VF): 1 - 15• Max. mixed flow temperature setting range: 30 - 85°C• Boiler condensation limit adjustment: 30 - 75°C (radiator

heating)• Underfloor temperature limit adjustment: 15 - 35°C (underfloor

heating)• Circulation pump switching-off adjustment: 20 – 45°C• Sensors type: KTY 81-210

Programmable Room unit AS 2000-E• Room unit AS 2000-E is designed for daily and weekly mode of

operation and for setting two temperature levels (day - night).• The possibility of correction room temperature or mixed flow

temperature (function is chosen on the right side of the unit )• Control of actual hour, day and heating status • Room temperature display• Kit weight: ROTOTERM MR-TR plus 1,1kg

ROTOTERM MR-TR 0,9kg

Code Description

21128 ROTOTERM MR-TR plus(Heating controller MR-TR, Room unit AS 2000-E, sensors AF, BSVF, BF, mounting kit)


Code Description

21131 ROTOTERM MR-TR (Heating controller MR-TR, sensors AF, BSVF, BF, mounting kit)

Radiator heating

Underfloor heating



ROTOTERM MR-NP “plus”

ROTOTERM MR-NP “plus is designed to regulate the radiator heating with gas boilers or low temperature boilers and for domestic hot water preparation. The controller is 2-point (PI) temperature controller of heating water, which works as a function of external temperature, and in conjunction with the room correction unit, allows remote room temperature adjustment. The controller is built in microprocessor technology and meets the latest quality standards. It offers a wide variety of programming options, allowing optimal controller settings for the selected object.

Features:• LED status indicator• Two possible applications:• Regulation of boiler, motor actuator for diverter valve and

circulation pump• Regulation of boiler and two circulation pumps• Pump and valve exercise (every 72h for 30s) which helps

prevent sticking during long periods of inactivity• Anti-legionella program• Service switch to assist installer on start-up and technician

during service• Sensors fault status on digital display• Factory set default parameters• Digital setting of all parameters• Temperature enquiry (outer, boiler, underfloor, mixed flow) on

digital display

Characteristics:• Supply voltage: 230VAC, 50Hz• Power consumption: max.4VA• Power supply of users: 1(1)A, 230VAC, 50Hz• Room temperature setting range: 5 - 25°C• Domestic hot water temperature setting range: 10 - 75°C• Heat curve ratio adjustment: 0,1 - 2°C• Heat curve parallel shift adjustment: +/- 10°C • Room unit influence (AS/VF): 1 - 15• Max. mixed flow temperature setting range: 30 - 85°C• Circulation pump switching-off adjustment: 20 - 45°C• Sensors type: KTY 81-210

Programmable Room unit AS 2000-E• Room unit AS 2000-E is designed for daily and weekly mode of

operation and for setting two temperature levels (day - night).• The possibility of correction room temperature or mixed flow

temperature (function is chosen on the right side of the unit )• Control of actual hour, day and heating status • Room temperature display • Kit weight 0,9kg

Code Description

21129 ROTOTERM MR-NP plus (Heating controller MR-NP, Room unit AS 2000-E, sensors AF, BSVF, BF, mounting kit)


Code Description

21132 ROTOTERM MR-NP (Heating controller MR-NP, sensors AF, BSVF, BF, mounting kit)

Scheme 1: it controls boiler, motorized diverting valve and pump

Scheme 2: it controls boiler and two pumps



ROTOTERM MR-B/T ROTOTERM MR-B/T is designed to regulate the temperature of domestic hot water in boiler or swimming pools. Regulator acts as a thermostat with adjustable temperature difference.

Features:• LED status indicator• Output for controlling heat source or circulation pump• Service switch to assist installer on start-up and technician

during service• Sensors fault status on digital display• Factory set default parameters• Digital setting of all parameters• Temperature display

Characteristics:• Supply voltage: 230VAC, 50Hz• Power consumption: max.4VA• Power supply of users: 1(1)A, 230VAC, 50Hz• Temperature setting range: 0-90°C• Hysteresis width adjustment: 1-15°C• Sensor type: KTY 81-210• Kit weight 0,5kg

Code Description

21134 ROTOTERM MR-B/T (VF) (Heating controller MR-B/T, sensor VF, mounting kit)


ROTOTERM MR-B ROTOTERM MR-B is designed to regulate constant temperature of domestic hot water in boiler or swimming pools. The controller is 3-point (PID) temperature controller of heating water.The controller is built in microprocessor technology and meets the latest quality standards. It offers a wide variety of programming options, allowing optimal controller settings for the selected object.

Features:• LED status indicator• Output for controlling motor actuator for mixing valves (series

MV120) and circulation pump• Service switch to assist installer on start-up and technician

during service• Sensors fault status on digital display• Factory set default parameters• Digital setting of all parameters• Temperature display

Characteristics:• Supply voltage: 230VAC, 50Hz• Power consumption: max.4VA• Power supply of users: 1(1)A, 230VAC, 50Hz• Temperature setting range: 0 - 90°C• Stationary area adjustment: 1 - 15°C• Reaction factor adjustment: 0,5 - 15• Circulation pump switching-off adjustment: 0 – 90°C• Sensor type: KTY 81-210• Kit weight: 0,5kg

Code Description

21133 ROTOTERM MR-B (VF) (Heating controller MR-B, sensor VF, mounting kit)




UNI TEMP UNI TEMP is a constant temperature controller. It is designed for mounting on mixing valve. It is intended for:• maintaining a constant temperature in boiler heating circuit

(protection against condensation),• use in under floor heating applications, industrial processes, heat

accumulators,• use in domestic hot water systems or swimming pools (individual

systems, SPA, public swimming pools). Features:• Actuator has a fixed rotation (90°)• Possibility of manual control• LED temperature display• Knob for adjusting desired temperature• With DIP switches inside actuator is possible to set the following

parameters:• Direction of rotation (CCW (inverse) /CW (direct) ) + recalibration• Different temperature ranges depending on the application (0-

100°C, 60-85°C, 20-70°C, 25-45°C)• Reaction factor x1/x10

Characteristics:• Supply voltage: 230VAC, 50Hz (with adapter)

24VAC, 50Hz (actuator only)• Power consumption: 7.5VA• Connection cable: 1.7m (2x0.75mm2)• Output torque: 15Nm• Rotation time: 73s/90°• Ambient temperature: 0..55°C, non condensed• Protection class (in accordance with EN 60335-1): II• Deegre of protection: IP44 (EN60529)• Sensor type: KTY 81-210PVC, lenght 1.5m,

6mm diameter, lenght 40mm• Mounting kit: enclosed code 58024• Kit weight: 0,68kg (actuator only)

0,95kg (actuator with adapter)

Code Description

*21135 UNI TEMP 24V 24VAC, 50Hz, 15Nm, (sensor VF, mounting kit (58024))

21136 UNI TEMP adapter 24/230V

230VAC, 50Hz, 15Nm, (sensor VF, mounting kit (58024), adapter 230VAC/24VAC)

Mounting kit for assembly on mixing valves of other manufacturers (Firšt (Rotomix, Rotomix G), ESBE (VRG, VRB), ACASO (TERMOMIX), BARBERI, FEROTERM, PAW, EURONORM, IMP, DANFOSS, BESSER, SELTRON, LOVATO, TUXHORN, STRAWA, CIMBERIO).

Code Mounting kit 58024 FIRŠT (ROTOMIX, ROTOMIX G), ESBE (VRG, VRB),

ACASO (TERMOMIX), BARBERI, FEROTERM, PAW, EURONORM, ESBE, IMP, DANFOSS, BESSER, SELTRON, LOVATO, TUXHORN, STRAWA, CIMBERIO

58026 LAZZARI, LANDIS58027 HONEYWELL MS58028 SIEMENS58029 MUT 100058030 W.I.L.B58031 CENTRA (ZRA, DRA)58032 MEIBES, WITA, OVENTROP, HOLTER HORA BR80 SMD/

SMV58033 TEHNOPLANT, EXCELSIOR, KRAMER, DE PALA

94

125

78

UNI-TEMP dimensions

90°

Manual control:

Note:When the button for manual operation is in <MAN> position, controller stays in temporary position irrespective of control signal.



ROTO TEMP Constant temperature controller with 3-way brass mixing valve, 24VAC, 50Hz, with VF sensor and mounting accessories.Due to the low height of the actuator (81.3 mm) it is suitable for installation in distribution cabinets or wall niche. It is intended for:• maintaining a constant temperature in boiler heating

circuit (protection against condensation),• use in under floor heating applications, industrial

processes, heat accumulators,• use in domestic hot water systems or swimming

pools (individual systems, SPA, public swimming pools).

Features:• Actuator has a fixed rotation (90°)• Possibility of manual control• LED temperature display• Knob for adjusting desired temperature• With DIP switches inside actuator is possible to set

the following parameters:• Direction of rotation (CCW (inverse) /CW (direct) )

+ recalibration• Different temperature ranges depending on the

application (0-100°C, 60-85°C, 20-70°C, 25-45°C)• Reaction factor x1/x10

ROTO TEMP dimensions Manual control:

Characteristics:• Supply voltage: 230VAC, 50Hz (with adapter)• Power consumption: 7.5VA• Connection cable: 1.7m (2x0.75mm2)• Output torque: 8Nm• Rotation time: 105s/90°• Ambient temperature: 0..55°C, non condensed• Protection class (in accordance with EN 60335-1): II• Deegre of protection: IP44 (EN60529)• Sensor type: KTY 81-210PVC, lenght 1.5m, 6mm diameter, lenght 40mmMixing valve • PN class: PN10• Connections: Internal thread, ISO 7/1• Seal: FKM, EPDM• Permissible media: Cold and warm watter, water with Glycol up to max.

50% vol• Media temperature: +5...110°C

Code Type A B D E H kg Kvs21147 ROTO TEMP F3 DN15 15 72 130,5 54,0 113,5 1,34 3

21148 ROTO TEMP F3 DN20 20 72 130,5 54,0 113,5 1,24 721149 ROTO TEMP F3 DN25 25 90 133,8 66,0 113,5 1,36 1121150 ROTO TEMP F3 DN32 32 90 138,0 70,5 113,5 1,58 1121146 ROTO TEMP Actuator only

90°

90°




UNI TEMP GF3 Constant temperature controller with 3-way cast iron mixing valve, 24/230VAC, 50Hz, with VF sensor and mounting accessories. It is intended for:• maintaining a constant temperature in boiler heating circuit

(protection against condensation),• use in under floor heating applications, industrial processes, heat

accumulators,• use in domestic hot water systems or swimming pools (individual

systems, SPA, public swimming pools).Features:• Actuator has a fixed rotation (90°)• Possibility of manual control• LED temperature display• Knob for adjusting desired temperature• With DIP switches inside actuator is possible to set the following



Mixing valve • Connection: inner thread DN20-DN40 DN50• Medium Temperature: +5°C..+110°C 120°C• Max. pressure: 6bar 10bar• Rotation angle: 90° 90°• Valve body: Cast iron Cast iron• Inner parts PPS Brass• Stem Nr.1.4305 Brass• O-rings FKM, 2x EPDM 2x EPDM• Fluids:Cold and hot water, water with Glykol up to max. 50% vol

UNI-TEMP dimensions

90°

Manual control:


A

B C

D

Characteristics:• Supply voltage: 230VAC, 50Hz (with adapter)• Power consumption: 7.5VA• Connection cable: 1.7m (2x0.75mm2)• Output torque: 15Nm• Rotation time: 73s/90°• Ambient temperature: 0..55°C, non condensed• Protection class (in accordance with EN 60335-1): II• Deegre of protection: IP44 (EN60529)• Sensor type: KTY 81-210PVC, lenght 1.5m,

6mm diameter, lenght 40mm

Code Type DN A B C D kg Kvs*21154 UNI TEMP G F3-3 20 68 161 105 92 2,26 8

*21155 UNI TEMP G F3-4 25 68 161 108 94 2,44 12*21156 UNI TEMP G F3-5 32 73 166 115 97 2,86 18*21157 UNI TEMP G F3-6 40 77 170 120 100 3,37 28*21158 UNI TEMP G F3-7 50 112 205 135 105 4,88 41


T [°C]

Example 2: Maintaining a constant return flow water temperature (protection against condensation) and direct connection into heating system (recommended use of hydraulic separator)

Example 1:Maintaining a constant return flow water temperature (protection against condensation) using solid or oil fuels in combination with water tank

hydraulic separator

T [°C]

Example 3:Maintening constant water temperature in hot water tank

TM200

Example 4:Solar heating - maintenance of constant pool water temperature

M

DTC

100/

2

T1

T2

T [°

C]

Example 5:Vacuum collectors - life extension. Regulator to prevent intrusion of cold water in the hot collector and thereby significantly improve the performance of collectors.

EMV 110 602

T [°C]

T1

T2

T +°C

!

T [°C]

Example 6:Underfloor Heating - maintain a constant temperature of heating water

Example 7:Limitation (maintaining) the temperature in the radiator heating circuit. In this example uses a 4-way mixing valve ROTOMIX G F4. 4-way valve may be used only if there is only one mixing circuit. Otherwise, use a 3-way mixing valve.

T [°C]

Example 8:Local underfloor heating - supply from radiator heating circuit

Example 9:Control of wall heating, maintaince a constant temperature of heating water

T +°C

!T [°C]

T +°C

!

T [°C]


UNITEMP,ROTOTEMP-Applications

In the circuit of underfloor (wall) heating must be (to limit the maximum temperature) built safety component (for example pipe thermostat), which disconnects the pump in case of high temperature (DIN 18560-2)!!


Examples of use:Injection circuit with throttling device (additional circulationpump in secondary circuit):- Low temperature heating - Floor heating - Radiator heating- Air heaters

Throttling circuit with the available differential pressure of system pump:- Heat exchangers- Zone control- Condensing boilers- District heating (direct and indirect heating station)- Refrigerators with dehumidification


UNI TEMP 690 Constant temperature controller UNI TEMP with 2-way control valve (special modulating insert) series 690 ISO5211, 24/230VAC / 50Hz, with VF sensor and mounting accessories.Valve with controller is designed for providing constant temperature flow for use in heating/cooling, ventilation and air conditioning systems. Features:• Actuator has a fixed rotation (90°)• Possibility of manual control• LED temperature display• Knob for adjusting desired temperature• With DIP switches inside actuator is possible to set the following



UNI-TEMP 690 dimensions

90°

Manual control:


Code Type DN A B C D E H CH Ø kg Kvs21140 UNI TEMP 690 24/230V DN15 15 - 1/2” 130 31,6 63,2 41 9x9 148 25 30 0,98 421141 UNI TEMP 690 24/230V DN20 20 - 3/4” 134 35 70 44,5 9x9 152 31 39 1,10 7,721142 UNI TEMP 690 24/230V DN25 25 - 1” 138 42,5 85 48,5 9x9 156 40 48 1,35 11,721143 UNI TEMP 690 24/230V DN32 32- 1 1/4” 146 47,2 94,6 56,5 9x9 164 49 57 1,64 2221144 UNI TEMP 690 24/230V DN40 40 - 1 1/2” 157 54 108 67,3 11x11 175 55 71 2,10 3821145 UNI TEMP 690 24/230V DN50 50 - 2” 164 63 127,5 74,5 11x11 182 69 87 2,80 56

Characteristics:• Supply voltage: 230VAC, 50Hz (with adapter)

24VAC, 50Hz (actuator only)• Power consumption: 7.5VA• Connection cable: 1.7m (2x0.75mm2)• Output torque: 15Nm• Rotation time: 73s/90°• Ambient temperature: 0..55°C, non condensed• Protection class (in accordance with EN 60335-1): II• Deegre of protection: IP44 (EN60529)• Sensor type: KTY 81-210PVC, lenght 1.5m,

6mm diameter, lenght 40mmValve:• PN class: PN32• Connections: Internal thread• Permissible media: Cold and

warm water, water with Glycol up to max. 50% vol

• Media temperature: 5...110°C• Flow characteristics: EQP - equal

percentage (to VDI/VDE 2173)

Opening angle [%]

Flow

Kv/K

vs [-

]

Valve flow characteristics:

VF

UNI TEMP 690

VF UNI TEMP 690


Mountingaccessories

Code Description

27074 TV1 copper hose, thread 1/2", l=100mm, inner diameter 7mm

27080 TV2 copper hose, thread 1/2”, l=90mm, inner diameter 14mm

27089 Mounting kit sensor’s mounting for DTC, ROTOTERM

Sensors

Code Description

27072 BSVF1 sensor, PVC insulation, max. 105°C, l=1,5m, R25°C=2000 Ω

27073 KF/BF sensor, silicon insulation, max. 180°C, l=2m, R25°C=2000 Ω

27069 AF2000 external sensor in housing, R0°C=1645 Ω

III. ACCESSORIES

RoomunitforcontrollersRototermProgrammable room unit AS2000-E with incorporated digital timer is an electronic time switch which is used for programming daily and weekly mode of operation. Two temperature levels can be set – day time and night time level. The design if the timer enables simple operation with keys as well as control of actual hour, day and heating conditions in any time. Additionally it is equipped with room temperature display.

Programmable room unit AS 2000-E has additional switch on the right side. It makes possible to choose two heating regimes:- room temperature, or- temperature correction of mixed flowCode Description

27100 AS 2000-E Programmable room unit AS2000-E with incorporated digital timer

Code Description

27066 SK3 Room unit SK3

It enables easy temperature correction. Inside the unit is slide switch to choose temperature correction: - room temperature, or- temperature correction of mixed flow


IV. DIFFERENTIAL THERMOSTATS

DTC 200/2G

Code Description

13017 DTC 200/2G (2 sensors, mounting kit)


DTC 200/2G is a differential thermostat, designed for heating DHWT (domestic hot water tank) from one heating source (solar collectors, boilers, heat pumps) with possibility to control the burner or electric heater. It can be also used for cooling living space with blowing the cool out-side air into the living space.

Features:• Output for controlling motor actuated ball valve

(type EMV110) with circulation pump, burner (gas / oil) or electric heater

• Knob for setting temperature (DHWT)• Knob for setting temperature difference• Setting working regime: with jumpers (heating or

cooling)• Selector switch for choosing the operation

(manual, auto), and to assist installer on start-up and technician during service

• LED status indicator (circulation pump, burner or electric heater)

Characteristics:• Supply voltage: 230VAC, 50Hz• Power consumption: 4VA• Output relay rating: 1(1)A, 230VAC, 50Hz• Enclosure rating (in accordance with IEC60529):

IP40 / DIN40050• In accordance with: EMC directive: 2004/108/

EEC,• LV Directive: 2006/95/EEC, PAH directive:

2005/69/EEC• Ambient temperature: 0…40°C• Humidity: RH 0%...70% (non condensed)• Storage temperature: -10…+70°C• Output: 2 x relay

• Motor actuated ball valve with circulation pump

• Burner or electric heater• Input: 2x sensors

• BSVF1 / KTY 81-210 PVC (1.5m long, insulation: -30°C to 105°C)

• KF / KTY 81-210 SILICON (2m long, insulation: -30°C to 180°C)

• Temperature setting range range (DHWT): 5 - 85°C

• Temperature difference setting: 0 - 15K• Hysteresis of thermostat: 1-2K• Weight: 0,5 kg

el. heater



DTC 200/4

DTC 200/4 is a differential thermostat, designed for heating DHWT (domestic hot water tank) from one or two heating sources (solar collectors, boilers, heat pumps).


(type EMV110) with circulation pump for each heating circuit

• Knob for setting temperature (DHWT)• Knob for setting temperature difference• Setting working regime: with jumpers (various

applications)• Selector switch for choosing the operation


• LED status indicator (circulation pump)


IP40 / DIN40050• In accordance with: EMC directive: 2004/108/EEC,• LV Directive: 2006/95/EEC, PAH directive:

2005/69/EEC• Ambient temperature: 0…40°C• Humidity: RH 0%...70% (non condensed)• Storage temperature: -10…+70°C• Output: 2x relay

• Motor actuated ball valve with circulation pump for two heating circuit

• Burner, or. electric heater• Input: 2x sensors

• 2x BSVF1 / KTY 81-210 PVC (1.5m long, insulation: -30°C to 105°C)

• 2x KF / KTY 81-210 SILICON (2m long, insulation: -30°C to 180°C)

• Temperature setting range (DHWT): 10 - 90°C• Temperature difference setting: 0 - 15K• Hysteresis of thermostat: 1 - 2K• Weight: 0,62 kg

Code Description

13020 DTC 200/4 (4 sensors, mounting kit)




DTC 100/2

DTC 100/2 is a differential thermostat, designed for heating DHWT (domestic hot water tank) from one heating sources (solar collectors, boilers, heat pumps).


(type EMV110) with circulation pump• Knob for setting temperature (DHWT)• Knob for setting temperature difference• Setting working regime: with jumpers (various

applications)• Selector switch for choosing the operation


• LED status indicator (circulation pump)



2005/69/EEC• Ambient temperature: 0…40°C• Humidity: RH 0%...70% (non condensed)• Storage temperature: -10…+70°C• Output: 1x relay

• Motor actuated ball valve with circulation pump• Input: 2x sensors



• Temperature setting range (DHWT): 10 - 90°C• Temperature difference setting: 5 - 15K• Hysteresis of thermostat: 1 - 2K• Weight: 0,5 kg

Code Description

13001 DTC 100/2 (2 sensors, mounting kit)




DTC 100/2 TDG

DTC 100/2 TDG is a differential digital thermostat, designed for heating DHWT (domestic hot water tank) from one heating source (solar collectors, boilers, heat pumps) with possibility to control the burner, or electric heater.


(type EMV110) with circulation pump, burner (gas / oil) or electric heater

• Selector switch for choosing the operation (manual, auto), and to assist installer on start-up and technician during service

• Knob for setting temperature DHWT• Built in circulation pump working hours counter• Digital display of all sensors temperatures• Sensors fault status on digital display (interrupted,

short circuited)• LED status indicator (circulation pump, burner or

electric heater)



2005/69/EEC• Ambient temperature: 0…40°C• Humidity: RH 0%...70% (non condensed)• Storage temperature: -10…+70°C• Output: 2x relay• Motor actuated ball valve with circulation pump• Burner or. electric heater• Input: 2x sensors



• Temperature setting range (DHWT): 10 - 90°C• Temperature difference setting: 2 - 15K• Hysteresis of thermostat: 1-2K• Weight: 0,55 kg

Code Description

13023 DTC 100/2 TDG (2 sensors, mounting kit)


el. heater el. heater



DTC 100/4TD DTC 100/4 TD is a differential digital thermostat, designed for heating DHWT (domestic hot water tank) from two heating sources (solar collectors, boilers, heat pumps) and for controlling the burner or electric heater.

Features:• Output for controlling motor actuated ball valve (type

EMV110) with circulation pump for two heating circuits (primary, secondary) and for controlling the burner (gas / oil) or electric heater

• Selector switch for choosing the operation (manual, auto), and to assist installer on start-up and technician during service

• Digital setting of all parameters• Digital display of all sensors temperatures• Sensors fault status on digital display (interrupted, short

circuited)• LED status indicator (circulation pump, burner or

electric heater)

Characteristics:• Supply voltage: 230VAC, 50Hz• Power consumption: 4VA• Output relay rating: 1(1)A, 230VAC, 50Hz• Enclosure rating (in accordance with IEC60529): IP40 /

DIN40050• In accordance with: EMC directive: 2004/108/EEC,• LV Directive: 2006/95/EEC, PAH directive: 2005/69/

EEC• Ambient temperature: 0…40°C• Humidity: RH 0%...70% (non condensed)• Storage temperature: -10…+70°C• Output: 3x relay

• Motor actuated ball valve with circulation pump for two heating circuits

• Burner, or. electric heater• Input: 4x sensors

• 3x BSVF1 / KTY 81-210 PVC (1.5m long, insulation: -30°C to 105°C)

• 1x KF / KTY 81-210 SILICON (2m long, insulation: -30°C to 180°C)

• Temperature setting range( DHWT): 10 - 90°C• Temperature difference setting: 0 - 15K• Hysteresis of thermostat: 1 - 2K• Weight: 0,65 kg

Code Description

13007 DTC 100/4 TD (4 sensors, mounting kit)


el. heater

burner


Accessories

Code Description

27074 TV1 copper hose, thread 1/2", l=100mm, inner diameter 7mm

27080 TV2 copper hose, thread 1/2”, l=90mm, inner diameter 14mm

27089 Mounting kit sensor’s mounting for DTC, ROTOTERM

Sensors

Code Description

27072 BSVF1 sensor KTY 81-210 PVC (1.5m long, insulation: -30°C to 105°C)

27073 KF/BF sensor KTY 81-210 SILICON (2m long, insulation: -30°C to 180°C)

27172 Pt1000-PVC sensor Pt1000-PVC, 1.5m long, (for regulator DTC500)

27173 Pt1000-SI sensor Pt1000-Silicon, 2m long (for regulator DTC500)

IV.DIFFERENTIALTHERMOSTAT-accessories



DTC500-microprocessorsolaranddifferentialtemperaturecontrollerforvariousheatingsystems.GENERALDTC 500 is a microprocessor solar and differential temperature controller for various heating systems.It has 10 pre-defined basic system layouts. For each basic system layout, specific adjustments are already stored. FEATURES• Easy and fast installation due to new wiring design• Pluggable terminals for fast wiring connection• LED indication of operation, status of outputs and errors • Digital temperature sensors display• Digital errors display - 36 logs with time • Possibility of manual activation of each output - for testing purposes only• Modulating speed control of standard pump• Protection of the burner or electric heater against to frequent activations (delay)• Economy function - potential free input for additional timer enables:

- economical DHWT heating mode or - protection against legionella

• PCB board overheat protection• Digital settings of all parameters • DTC 500 is compatible with all motorized ball valve series EMV 110 and

UNI from Firšt rototehnika, s.p.PARAMETER SETTINGSYou can set the following parameters:• minimal temperature of heating source (low temperature of collectors)• hysteresis of the sensors T1, T2, T3, T4• set temperature • switching difference (T1-T2 or T3-T4)• collectors frost protection (switch ON at <2°, OFF at >5°C)• domestic hot water tank cooling (when the water in the water tank is

overheated, the controller cools down the water in the water tank through the night)

• maximal temperature of collectors• setting economical temperature of the water tank• ABS - ant blockade function (every 30 day starts pumps for 30 second and

turns the actuators in both start and end positions• switch ON/OFF one of the heating circuit• switching delay of output R5 - in case of electrical heater• heating source priority• choosing PSC value - pump speed control - setting minimal speed of pump

(30%..100%, by step of 7%)• safety functions:

- collectors overheating - in case of overheating (>155°C) the controller switches of the pump and closes the actuator - domestic hot water tank overheating - in case of overheating (>97°C) the controller switches of the pump and closes the actuator

ELECTRICAL• Electrical voltage supply: 230VAC, 50Hz, max. 5VA• Terminal range: 0,3 - 1,6mm2• Number of inputs: - 4 analog sensor inputs, 1 potential free digital• Number of outputs:

- 4 Triac output (1A) with PSC possibility (pump speed control), - 1 relay outputs 1(1)A… 230VAC

• Type of temperature sensors: PT1000• Controller type: P, PSC 7%-100% (pump speed control)• Temperature sensors measuring range: -40….+180˚CENVIRONMENTAL • Storage temperature: -20˚C... + 70˚C• Operating temperature: 0...+50˚C• Dimensions (HxWxD): 162x121x46• Material:

- Socket: PA-GF 25-FR - Cover: PC-UL-V0 eelf extinguishing enclosures

Code Description

13039 * DTC 500 (4 sensors, mounting kit)


Economy/Extra input(potential free)

Sensor typePt1000


System examples



V.ROTARY MIXING VALVES

ROTARY BRASS MIXING VALVES ROTOMIX F3, F4

Mixing valves ROTOMIX are made from brass and are designed for use in small and medium size heating applications. Valve is available in dimensions from DN15 up to DN32mm with internal threaded connection. Mixing valves are suitable for long-lasting operation because of special construction of sealing. Small rotation torque of the valve, allow motor actuator operationing in the same time reduces possibility of valve blocking. Compact housing construction does not allow any damages during mounting and also make possible quick and easy mounting of actuators.Valves are compatible with all types of motor rotary actuators from Firšt Rototehnika. Possible replacement of seals on the mixing valve axe can be performed without the release of water from the system.

ROTOMIX F3 - 3-way mixing valve

Code Type DN A B C D E Kvs kg41000 ROTOMIX F3 15 - 1/2” 1/2” 72 18,5 64 54,0 3 0,6541001 ROTOMIX F3 20 - 3/4” 3/4” 72 18,5 64 54,0 7 0,5341002 ROTOMIX F3 25 - 1” 1” 90 20,7 69 66,0 11 0,6441003 ROTOMIX F3 32 - 1 1/4” 1 1/4” 90 25,5 69 70,5 11 0,77

Characteristics:• Connections: internal thread, Rp ISO 7/1• Medium: cold and hot water, water with glycol

up to max. 50%vol• Medium temperature: +2°C …110°C• PN class: PN10• Max. diferential pressure: 1bar• Leackage rate: max. 0,2%Kvs• Material:

• Valve body: brass CW617N• Rotor axis: brass CW617N• O-rings: FKM, EPDM

rotation angle

* Kvs=m3/h ∆p=1bar

valve position

% w

ater

flow


ROTOMIX F4 - 4-way mixing valve

Code Type DN A B C D Kvs kg

41008 ROTOMIX F4 15 - 1/2” 15 72 18,5 64 3,4 0,7041009 ROTOMIX F4 20 - 3/4” 20 72 18,5 64 6 0,5941010 ROTOMIX F4 25 - 1” 25 90 24 69 8,1 0,7341011 ROTOMIX F4 32 - 1 1/4” 32 90 24 69 10,6 0,89


0,1

1

2

4

6

1

10

20

40

60

80

10 Bar

m /h3

DN25

-K

=8.1

VS

DN32

-K

=10

.6

VS

DN20

-K

=6

VS

DN15

-K

=3.4

VS

1. example 2. example 3. example 4. example

1. example 2. example

Installation of 3-way mixing valve



valve position

% w

ater

flow


Code Type DN A B C D E F Kvs kg41054 ROTOMIX G F4 3/4” 20 - 3/4” 105 52,5 29 101,5 105 69 8 2,4041055 ROTOMIX G F4 1” 25 - 1” 108 54 29 101,5 108 69 12 2,6341056 ROTOMIX G F4 1 1/4” 32 - 1 1/4” 115 57,5 34 106,5 115 74 18 3,1941057 ROTOMIX G F34 1 1/2” 40 - 1 1/2” 120 60 38 110,5 120 78 28 3,63*41084 ROTOMIX G F4 2” 50- 2” 135 68 48 128 135 100 41 4,60


CAST IRON MIXING VALVE ROTOMIX G

Mixing valve ROTOMIX G is made from cast iron and is designed for use in heating applications. Valve is available in dimensions from DN20 up to DN40mm with internal thread connection. Mixing valve is suitable for long-lasting operation because of special construction of bearing. Small rotation torque of the valve, allow motor actuator operationing in the same time reduces possibility of valve blocking. The valve is equipped with a lever for manual operation and is also suitable for automatic control, by means of an actuator. Suitable actuators are Firšt (UNI 3P, UNI MOD).

ROTOMIX G - dimension

Code Type DN A B C D E F Kvs kg41050 ROTOMIX G F3 3/4” 20 - 3/4” 105 52,5 29 101,5 90 69 8 1,6541051 ROTOMIX G F3 1” 25 - 1” 108 54 29 101,5 92 69 12 1,8341052 ROTOMIX G F3 1 1/4” 32 - 1 1/4” 115 57,5 34 106,5 95 74 18 2,2541053 ROTOMIX G F3 1 1/2” 40 - 1 1/2” 120 60 38 110,5 98 78 28 2,76*41083 ROTOMIX G F3 2” 50- 2” 135 68 48 128 112 100 41 4,25

Characteristics: DN20-DN40 DN50Medium Temperature: +5°C..+110°C 120°CMax. pressure: 6bar 10barRotation angle: 90° 90°Valve body: Cast iron Cast ironInner part: PPS BrassStem: W.Nr.1.4305 BrassSealing: FKM, 2x EPDM 2x EPDM


A

B

E

FD

C

DN

A

B

FD

E

DN

C


VI. THERMIC MIXING VALVES

CastironthermicvalveT-MIX

The 3-way thermic valve T-MIX is designed to load storage tanks at solid fuel systems. The valve brings a higher return temperature to the boiler; meaning increased efficiency through, reduced tar formation and a longer life for the boiler by minimizing condense of flue gases.

Operation:Typical application is in heating installation where solid fuel boiler is used to feed storage tank. The Thermic valve T-MIX will protect the boiler from low return temperatures. Valve is installed in the return line (45°C, 55°C, 65°C).Port 1 and 3 are always open, which enables circulation in boiler as well as higher return temperature. The higher return temperatures to the boiler means reduced tar formation and minimized condense of flue gases which prevents premature corrosion of the boiler. The possibility of thermal shock due to the return of cold water from the system is also reduced.The valve can be mounted in any position.

ROTOMIX G - dimensions

Characteristics:• Connections: 3-port, internal

thread Rp ISO 7/1• Medium: water, glycol <50%• Medium temperature:

+5°C …110°C• Working pressure: max. 6bar

Material:• Valve body: GG25 DIN1691• O-rings: EPDM, klingerit (tesnit

BA-R)• Valve insert: PPS

A

B C

Code Type DN Closed temperature Open temperature A B C Kg* 41062 T-MIX DN25 60°C 25 - 1” <+60°C +70°C 54 108 68 1,83* 41063 T-MIX DN32 60°C 32 - 1 1/4” <+60°C +70°C 57.5 115 73 2,25* 41064 T-MIX DN40 60°C 40 - 1 1/2” <+60°C +70°C 60 120 77 2,76* 41065 T-MIX DN25 55°C 25 - 1” <+55°C +65°C 54 108 68 1,83* 41066 T-MIX DN32 55°C 32 - 1 1/4” <+55°C +65°C 57.5 115 73 2,25* 41067 T-MIX DN40 55°C 40 - 1 1/2” <+55°C +65°C 60 120 77 2,76* 41068 T-MIX DN25 45°C 25 - 1” <+45°C +55°C 54 108 68 1,83* 41069 T-MIX DN32 45°C 32 - 1 1/4” <+45°C +55°C 57.5 115 73 2,25* 41070 T-MIX DN40 45°C 40 - 1 1/2” <+45°C +55°C 60 120 77 2,76


VII. COMPACT ROTARY ACTUATOR WITH BRASS MIXING VALVES

EUROMIX F3, EUROMIX F4 EUROMIX is a compact version of a motor and rotating mixing valve ROTOMIX. It is designed for use in radiators, floor or remote heating systems. Due to small dimensions is suitable for systems with copper installation.

Features:• Three wire control (SPDT) with two or three point regulators• Visible mark of valve shutter position (red pointer on actuator cover)• Quick and simple assembly the actuator on the mixing valve by push/pull

system, without screwing• Compatible with all Firšt regulators

EUROMIX F3 - 3-way motorized mixing valve

Actuator characteristics:• Motor type control: 3-point• Supply voltage: 230VAC, 50Hz• Power consumption: 3,5VA• Protection class (in accordance with EN-60335-1): II• Enclosure rating (in accordance with IEC60529):

IP44• In accordance with: EMC directive: 2004/108/EEC,

LV Directive: 2006/95/EEC, PAH directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 3x0.5mm2, L=2m• Position indication: on actuator cover• Possibility of manual control: yes• Direction of rotation: defined

Valve characteristics:• Connections: 3-port, internal thread Rp ISO 7/1• Medium: water• Medium temperature: +5°C…110°C• Working pressure: max. 6bar• Material:


Izvedba ventila z zunanjim/notranjim navojem

Code Type Voltage Time Torque DN A B D E Kvs kg*10051 EUROMIX F3 230VAC, 50Hz 3,5min / 90° 8Nm 15 - 1/2” 15 72 139 54 3 1,2910052 EUROMIX F3 230VAC, 50Hz 3,5min / 90° 8Nm 20 - 3/4” 20 72 139 54 7 0,9010053 EUROMIX F3 230VAC, 50Hz 3,5min / 90° 8Nm 25 - 1” 25 90 146 66 11 1,0210054 EUROMIX F3 230VAC, 50Hz 3,5min / 90° 8Nm 32 - 1 1/4” 32 90 146 70,5 11 1,24

By special request: version with inner and external threadCode Type DN A B D E Kvs kg

*10059 EUROMIX F3 N3/4” / Z1” 20 - 3/4” 3/4” 72 139 54 7 1,19

*10060 EUROMIX F3 N1” / Z1 1/4” 25 - 1” 1” 90 146 69 11 1,10* Kvs=m3/h ∆p=1bar

valve position

% w

ater

flow


Code Type Voltage Time Torque DN A B D E Kvs kg10055 EUROMIX F4 230VAC, 50Hz 3,5min / 90° 8Nm 15 - 1/2” 1/2” 72 139 72 3,4 1,3410056 EUROMIX F4 230VAC, 50Hz 3,5min / 90° 8Nm 20 - 3/4” 3/4” 72 139 72 6 1,0110057 EUROMIX F4 230VAC, 50Hz 3,5min / 90° 8Nm 25 - 1” 1” 90 146 90 8,1 1,1510058 EUROMIX F4 230VAC, 50Hz 3,5min / 90° 8Nm 32 - 1 1/4” 1 1/4” 90 146 90 10,6 1,32

By special request: version with inner and external threadCode Type DN A B D E Kvs kg

*10061 EUROMIX F4 N3/4” / Z1” 20 - 3/4” 3/4” 72 139 72 6 1,22

*10062 EUROMIX F4 N1” / Z1 1/4” 25 - 1” 1” 90 146 90 8,1 1,97

EUROMIX F4 - 4 way motorized mixing valve

VII. COMPACT ROTARY ACTUATOR WITH BRASS MIXING VALVES

0,1

1

2

4

6

1

10

20

40

60

80

10 Bar

m /h3

DN25

-K

=8.1

VS

DN32

-K

=10

.6

VS

DN20

-K

=6

VS

DN15

-K

=3.4

VS


valve position

% w

ater

flow




VII. COMPACT ROTARY ACTUATOR WITH CAST IRON MIXING VALVES

EUROMIX G F3, EUROMIX G F4 EUROMIX G F3, EUROMIX G F4 EUROMIX is a compact version of electric motor operator UNI 3P and cast iron mixing valve ROTOMIX G. Mixing valve is made of cast iron with internal threads from 3/4” to 2”.Because of its flow characteristics, and specially crafted sealing, they are suitable for long-term operation in heating installations, especially in systems with solid fuel boilers.Features:• Actuator has a fixed rotation (90°)• Possibility of manual override with button on actuator cover (gear is

disengaged for as long the button is locked).• Output electric signal (L) at the end position of the actuator (circulation

pump control) and premounted auxiliary switches at both end positions.

EUROMIX G F3 - 3-way motorized mixing valve

Actuator characteristics:• Motor type control: 3-point• Supply voltage: 230VAC, 50Hz• Power consumption: 6VA, 0VA (in standby)• Protection class (in accordance with EN-60335-1): II• Enclosure rating (in accordance with IEC60529):


LV Directive: 2006/95/EEC, PAH directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord (black): 4x0.5mm2, L=1m• Auxiliary switches cord (grey): 4x0.5mm2, L=1m• Position indication: on actuator cover• Possibility of manual control: yes• Direction of rotation: defined

Code Type A B D E H Kvs kg*11059 EUROMIX G F3 3/4” 20 105 172 92 143 8 2,15*11060 EUROMIX G F3 1” 25 108 172 94 143 12 2,33*11061 EUROMIX G F3 1 1/4” 32 115 177 97 143 18 2,75*11062 EUROMIX G F3 1 1/2” 40 120 181 100 143 28 3,26* 11067 EUROMIX G F3 2” 50 135 200 110 150 41 4,71

Valve characteristics: DN20-DN40 DN50Medium Temperature: +5°C..+110°C 120°CMax. pressure: 6bar 10barRotation angle: 90° 90°Valve body: Cast iron Cast ironInner part: PPS BrassStem: W.Nr.1.4305 BrassSealing: FKM, 2x EPDM 2x EPDM

Voltage: 230VAC, 50Hz, Rotation time: 73s/90°, Torque: 15Nm

EUROMIX G F4 - 4-way motorized mixing valve

Code Type A B D E H Kvs kg*11063 EUROMIX G F4 3/4” 20 105 172 105 143 8 2,9*11064 EUROMIX G F4 1” 25 108 172 108 143 12 3,13*11065 EUROMIX G F4 1 1/4” 32 115 177 115 143 18 2,75*11066 EUROMIX G F4 1 1/2” 40 120 181 120 143 28 3,26* 11068 EUROMIX G F4 2” 50 135 200 135 150 41 4,71

Voltage: 230VAC, 50Hz, Rotation time: 73s/90°, Torque: 15Nm

Application with 3-way mixing valve Application with 4-way mixing valve


VIII. ELECTRIC ACTUATORS FOR ROTARY MIXING VALVES

MV 120/09E Electric actuator series MV120/09E is designed for operating 3- and 4- way mixing valves from 1/2” up to 1 ½” for various manufacturers.Features:• It is supplied with handle and standard adapters for mounting on various mixing valves.• Motor is reversible, allowing the rotation to the left and right side• Rotation angle is fixed (90°), defined by built-in micro switches• Output electric signal (L) at the end position of the actuator (circulation pump control).• Visible mark of valve shutter position (red pointer on drive cover)• Mixing valve position can be manually adjusted with handle which allows releasing locked

valve during long stand-stills.• Handle is fitted with plastic security part which is in function of fuse and will break down by

overcharging to avoid damage on sinchro motor or gears.

Actuator characteristics:• Supply voltage: 230VAC/50Hz,

*24VAC/50Hz, *24VDC MOD 0…10VDC• Power consumption: 3,5VA• Micro switch rating: 1(1)A, 250VAC• Protection class (in accordance with EN-

60335-1): I• Enclosure rating (in accordance with

IEC60529): IP55• In accordance with: EMC directive:

2004/108/EEC,• LV Directive: 2006/95/EEC, PAH

directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 5x0.5mm2, L=1.5m• Position indication: handle on actuator• Possibility of manual control: yes• Direction of rotation: defined

Code Type Voltage Time Max Torque kg12094 MV 120/09E 230VAC, 50Hz 3,5min / 90° 6Nm 1,112098 MV 120/09E 230VAC, 50Hz 1.75min / 90° 6Nm 1,1*12001 MV 120/09E 24VDC 15s / 90° 6Nm 1,1*12006 MV 120/09E 0..10V 24VAC, 50HZ 3,5min / 90° 6Nm 1,1

Actuator is equipped with standard adapters for mounting on mixing valves of various manufacturers:FIRŠT, Ferrotherm, IMP, IMT, Barberi, ESBE, Besser, Honeywell (cast iron), Landis&Gyr, IKA, MUT, ACASO, API, TEM, Honeywell Grauguss, …By special orders we supply adapters for following mixing valves: Vailant, Viessmann, V.I.L.B, TVT-STADLER , Honeywell MS, Centra.

MV 120/210 Electric actuator series MV 120/210 is designed for operating ventilation flaps and 3- and 4- way mixing valves from 1/2” up to 1 ½” for various manufacturers.Features:• It is supplied with handle and standard adapters for mounting on various mixing valves.• Drive is reversible, allowing the rotation to the left and right side• Adjustable rotation angle from 15 up to 340°• Output electric signal (L) at the end position of the actuator (circulation pump control).• Mixing valve position can be manually adjusted with handle which allows releasing

locked valve during long stand-stills.• Handle is fitted with plastic security part which is in function of fuse and will break

down by overcharging to avoid damage on sinchro motor or gears


*24VAC/50Hz, *24VDC MOD 0…10VDC• Power consumption: 3,5VA• Micro switch rating: 1(1)A, 250VAC• Protection class (in accordance with EN-





Code Type Voltage Time Max Torque kg12214 MV 120/210 230VAC, 50Hz 3,5min / 90° 6Nm 1,112218 MV 120/210 230VAC, 50Hz 1.75min / 90° 6Nm 1,1

Actuator is equipped with standard adapters for mounting on mixing valves of various manufacturers: FIRŠT, Ferrotherm, IMP, IMT, Barberi, ESBE, Besser, Honeywell (cast iron), Landis&Gyr, IKA, MUT, ACASO, API, TEM, Honeywell Grauguss, …By special orders we supply adapters for following mixing valves: Vailant, Viessmann, V.I.L.B, TVT-STADLER , Honeywell MS, Centra.



MV 120/360 Electric actuator series MV 120/360 is designed for operating ventilation flaps and 3- and 4- way mixing valves from 1 1/4” up to 4” for various manufacturers.Features:• It is supplied with handle and standard adapters for mounting on various mixing valves.• Drive is reversible, allowing the rotation to the left and right side• Adjustable rotation angle from 15 up to 340°• Mixing valve position can be manually adjusted with handle which allows releasing

locked valve during long stand-stills.• Output electric signal (L) at the end position of the actuator (circulation pump control).


*24VAC/50Hz, *24VDC MOD 0…10VDC• Power consumption: 5VA• Micro switch rating: 1(1)A, 250VAC• Protection class (in accordance with EN-





Code Type Voltage Time Max Torque kg12363 MV 120/360 230VAC, 50Hz 3,5min / 90° 45Nm 212362 MV 120/360 230VAC, 50Hz 1.75min / 90° 25Nm 2*12102 MV 120/360-417 24VAC, 50Hz,

0..10V, 4..20mA3,5min / 90° 25Nm 2

Priložen set adapterjev za prigradnjo na mešalne ventile: FIRŠT, ESBE, IMT, TEM, Honeywell, Landis&GYR, V.I.L.B., Centra, TVT-Stadler, Vaillant, Viessmann, MUT, ACASO, AEG, BICO (novi), BÜCHE, ISTA, KLÖCKNER, HORA,...

MV 120.. EUROMIX Electric actuator series MV 120_540 (EUROMIX) is designed for operating 3- and 4-way mixing valves from 1/2” up to 1 1/4”.Features:• Motor is reversible, allowing the rotation to the left and right side• Rotation angle is fixed (90°), defined by built-in micro switches• Quick and simple assembly the actuator on the mixing valve by push/pull

system, without screwing• Visible mark of valve shutter position (red pointer on drive cover)

Actuator characteristics:• Supply voltage: 230VAC/50Hz• Power consumption: 3,5VA• Protection class (in accordance with EN-60335-

1): II• Enclosure rating (in accordance with IEC60529):

IP44• In accordance with: EMC directive: 2004/108/


2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 3x0.5mm2, L=2m• Position indication: on actuator cover• Possibility of manual control: yes• Direction of rotation: defined

Code Type Voltage Time Max Torque kg10046 MV 120..540 230VAC, 50Hz 3,5min / 90° 8Nm 0,6410047 MV 120..510 230VAC, 50Hz 1,75min / 90° 8Nm 0,64*12100 MV 120 147 24VAC, 50Hz,

0..10V, 4..20mA3,5min / 90° 8Nm 0,64

Actuator is equipped with standard adapters for mounting on mixing valves of various manufacturers:FIRŠT (ROTOMIX). By special orders we supply adapters for following mixing valves: Acaso, Esbe,...


Actuator is equipped with standard adapters for mounting on mixing valves of various manufacturers:FIRŠT (ROTOMIX). By special orders we supply adapters for following mixing valves: Acaso, Esbe,...


MV 120..4417 COMP MOD

Firšt actuators series COMP MOD are controlled with standard modulating signal of 0..10VDC (factory default) and moves to the position defined by control signal. That allows actuator to be controlled by controllers with modulating output. Actuator is designed for operating 3- and 4- way mixing valves ROTOMIX (FIRŠT production).Actuators have a fixed angle rotation of 90° and possibility of manual override with button on actuators cover (gear is disengaged for as long the button is locked).Features:• The actuator is controlled with standard modulating signal of DC

0…10V (factory default) and moves to the position defined by control signal. That allows actuator to be controlled with modulating signal.

• With DIP switches inside actuator is possible to choose control signal (voltage, current), rotation direction, signal range and resolution and opening curve characteristic.

• Possibility of manual override with button on actuator cover (gear is disengaged for as long the button is locked).

Actuator characteristics:• Motor type control: modulating (0…10VDC, 4…20mA)• Supply voltage: 24VAC/50Hz• Power consumption: 3.5VA• Micro switch rating: 1(1)A, 230VAC• Max. torque: 8Nm• Rotation time: 105s/90°• Protection class (in accordance with EN-60335-1): II• Enclosure rating (in accordance with IEC60529): IP44• In accordance with: EMC directive: 2004/108/EEC,• LV Directive: 2006/95/EEC, PAH directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 4x0.5mm2, L=1m• Position indication: handle on actuator cover• Possibility of manual control: yes• Direction of rotation: defined• Weight of actuator: 0,42kg

With DIP switches inside actuator is possible to set the following parameters:• DIP_1 Rotation direction (CCW / CW ) +

recalibration• DIP_2 Control signal Y (direct/inverse)• DIP_3,4 Control signal Y range (0,16..9,84V, 2..9,84V,

0,16..4,88V, 5,12..9,84V, 0..20mA, 4..20mA)• DIP_5 Control signal Y (voltage/current)

MV120..COMP MOD with 3-way mixing valve

Type DN A B D E H Kvs kgMV120 COMP MOD DN15 15 - 1/2” 15 72 130,5 54,0 113,5 3 1,34MV120 COMP MOD DN15 20 - 3/4” 20 72 130,5 54,0 113,5 7 1,24MV120 COMP MOD DN15 25 - 1” 25 90 133,8 66,0 113,5 11 1,36MV120 COMP MOD DN15 32 - 1 1/4” 32 90 138,0 70,5 113,5 11 1,58


Code Type Voltage Time Max Torque kg12118 MV120..4417 COMP MOD 24VAC, 50Hz 105s / 90° 8Nm 0,42



UNI 3P Actuator characteristics:• Motor type control: 3-point• Supply voltage: 230VAC/50Hz, *24VAC/50Hz• Power consumption: 6VA, 0VA (in standby)• Micro switch rating: 1(1)A, 250VAC• Protection class (in accordance with EN-60335-



EEC, LV Directive: 2006/95/EEC, PAH directive: 2005/69/EEC

• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 4x0.5mm2, L=1m• Position indication: handle on actuator cover• Possibility of manual control: yes• Direction of rotation: defined

Code Type Voltage Time Max Torque kg12517 UNI 3P 20240 230VAC, 50Hz 24s/90° 9Nm 0,6712502 UNI 3P 20480 230VAC, 50Hz 48s/90° 15Nm 0,6712513 UNI 3P 20483 24VAC, 50Hz 48s/90° 15Nm 0,6712503 UNI 3P 20730 230VAC, 50Hz 73s/90° 15Nm 0,6712514 UNI 3P 20733 24VAC, 50Hz 73s/90° 15Nm 0,6712506 UNI 3P 21470 230VAC, 50Hz 147s/90° 15Nm 0,67*12515 UNI 3P 21473 24VAC, 50Hz 147s/90° 10Nm 0,67*12507 UNI 3P 21780 230VAC, 50Hz 178s/90° 12Nm 0,67*12516 UNI 3P 21783 24VAC, 50Hz 178s/90° - 0,67

Actuator is equipped with standard adapters for mounting on mixing valves of various manufacturers: FIRŠT (Rotomix, Rotomix G), ESBE (VRG, VRB), ACASO (TERMOMIX), BARBERI, FEROTERM, PAW, EURONORM, ESBE, IMP, DANFOSS, BESSER, SELTRON, LOVATO, PAW. By special orders we supply adapters for following mixing valves (TABLE)

Adapterkitandaccessories

Code Accessories10024 RM24 Relay module for actuators EMV 110..530,550 and MV 120/09E52202 Switch module S2 for actuator MV (2 potential free contact at end positions)

Code Adapter kit for MV120 series20061 Adapter kit for MV120/09E, MV 120/210, MV 120/36020060 Adapter kit for MV120..510 in MV 120..540 mounting on valves DIVERT, ROTOMIX

Code Adapter kit for UNI series58024 FIRŠT (ROTOMIX, ROTOMIX G), ESBE (VRG, VRB), ACASO (TERMOMIX), BARBERI, FEROTERM,

PAW, EURONORM, ESBE, IMP, DANFOSS, BESSER, SELTRON, LOVATO, TUXHORN, STRAWA, CIMBERIO

58026 LAZZARI, LANDIS58027 HONEYWELL MS58028 SIEMENS58029 MUT 100058030 W.I.L.B58031 CENTRA (ZRA, DRA)58032 MEIBES, WITA, OVENTROP, HOLTER HORA BR80 SMD/SMV58033 TEHNOPLANT, EXCELSIOR, KRAMER, DE PALA

Electric actuator series UNI 3P is designed for operating 3- and 4-way mixing valves (ROTOMIX G) from size 3/4” up to 1 1/2”.Features:• It is controlled by the 3-point signal and especially suitable for mixing circuit

regulation. • With the button for manual control is possible to manual override – gear is

disengaged for as long the button is locked• Actuator is available with 24VAC or 230VAC, 50Hz, power supply. At choice are

different speeds of rotation. • Output electric signal (L) at the end position of the actuator (circulation pump

control) and premounted auxiliary switches at both end positions.

125

78

92,5


IX. ROTARY DIVERTER VALVES

BrassdivertervalveDIVERTF3L

CastirondivertervalveDIVERTGF3LDiverter valve DIVERT G FL3 is made from cast iron and is designed for use in heating applications. Valve is available in dimensions from DN20 up to DN40mm with internal thread connection. Features:• Diverter valve is suitable for a long-lasting operation because of their particularly manufactured sealing and their flow characteristics. • Small rotation torque of the valve allows motor actuator operating. In the same time it reduces possibility of valve blocking.• The valve is normally equipped with a lever for manual operation and is also suitable for automatic control, by means of an actuator.

Suitable actuators are UNI D2P (Firšt)Characteristics:• Connections: 3-port, internal thread Rp ISO

7/1• Medium: water, glycol <50%• Medium temperature: +5°C…110°C• Working pressure: max. 6bar• Material:

• Valve body: GG25 DIN 1691• Rotor axis: W.Nr.1.4305-inox/PPS• O-rings: FKM, EPDM, klingerit (tesnit

BA-R)

A

B C

Code Type DN A B C Kvs kg41058 DIVERT G F3L 20 - 3/4” 52,5 105 68 8 1,6541059 DIVERT G F3L 25 - 1” 54 108 68 12 1,8341060 DIVERT G F3L 32 - 1 1/4” 57,5 115 73 18 2,2541061 DIVERT G F3L 40 - 1 1/2” 60 120 77 28 2,76

Diverter valve DIVERT FL3 is made from brass and is designed for use in heating applications. Valve is available in dimensions from DN15 up to DN32mm with internal thread connection. Features:• Diverter valve is suitable for a long-lasting operation because of their particularly manufactured sealing and their flow characteristics. • Small rotation torque of the valve allows motor actuator operating. In the same time it reduces possibility of valve blocking.• Compact construction enables quick assembly with electric actuator.• Quick replacement of O-rings without disassembling the valve from installation.

Characteristics:• Connections: 3-port, internal thread Rp ISO

7/1• Medium: water• Medium temperature: +5°C…110°C• Working pressure: max. 6bar• Material:


Code Type DN A B C D E Kvs kg*41004 DIVERT F3L 1/2” 15 - 1/2” 1/2” 72 18,5 64 54 3 0,6541005 DIVERT F3L 3/4” 20 - 3/4” 3/4” 72 18,5 64 54 7 0,5341006 RDIVERT F3L 1” 25 - 1” 1” 90 24 69 66 11 0,6441007 DIVERT F3L 1 1/4” 32 - 1 1/4” 1 1/4” 90 24 69 70,5 11 0,77


X. COMPACT ROTARY ACTUATOR WITH BRASS DIVERTER VALVE

EMV 110 ROTODIVERT-M Electric motor driven EMV110 actuator with installed 3-way brass diverter valve operate as diverting element in closed heating systems, such as for heating sanitary water or central heating or for switching between two heating sources; gas/oil boiler or solid fuel boiler.FEATURES• Compact version enables quick assembly and electrical connection.• Effectively and economically used as reversible element in systems where two

heating sources are used or for supply of heating to two consumers - heating and sanitary water.

• Dimensions of diverter valve from 1/2” to 1 1/4” are suitable for systems with copper pipes.

• Built-in relay enables 2-point control / SPST and is used for the parallel operation of several electric actuators.

• Quick replacement of O-rings without disassembling the valve from installation.• Output signal at the end position of the actuator B-AB (e.g. for the control of the

circulation pump). • Possibility of manual control with lever.

ROTODIVERT

Actuator characteristics:• Supply voltage: 230VAC/50Hz, *24VAC/50Hz• Power consumption: 9VA working,

in standby: 5VA (relay ON), 0VA (relay OFF)• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-60335-




• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 4x0.5mm2, L=1m• Position indication: on actuator cover• Possibility of manual control: with lever• Direction of rotation: not defined CW/CCW• Built in relay module: yes• Time: 18s/90°

Valve characteristics:• Connections: 3-port, internal thread Rp ISO 7/1• Medium: water, water with glycol up to 50% vol• Medium temperature: +2°C…110°C• PN class: PN10• Max differential pressure: 100kPa• Leackage rate: 0,2% of Kvs• Material:


Code Type Voltage A (DN) B C D E Kvs kg

10390 EMV 110 Rotodivert-M 1/2” 230V 230VAC, 50Hz 15 - 1/2” 72 17,5 130,5 54,0 3 1,0410391 EMV 110 Rotodivert-M 3/4” 230V 230VAC, 50Hz 20 - 3/4” 72 17,5 130,5 54,0 7 0,9210392 EMV 110 Rotodivert-M 1" 230V 230VAC, 50Hz 25 - 1” 90 20,8 133,8 66,0 11 1,0110393 EMV 110 Rotodivert-M 1 1/4” 230V 230VAC, 50Hz 32 - 1 1/4” 90 25,5 138,0 70,5 11 1,19


valve position

% w

ater

flow


ROTODIVERT - examples


Diverter valve switches between two heating sources. This combination ensures utilisation of cheaper energy source. When this source is consumed, reversible valve switches to the second energy source and with limit switches, which are in the actuator, activates the second energy source. The flow through the pump is never completely closed by F3L reversible valve, therefore no pressure shocks appear.

In combination with “ ROTOTERM MR-NP” automatic control system of the house this separating valve enables heating of a residential unit and sanitary water with just one pump, where sanitary water has priority. The flow through the pump is never completely closed by ROTODIVERT diverter valve, therefore no pressure shocks appear.

Diverter valve switches between two heating sources. This combination ensures utilisation of cheaper energy source. When this source is consumed, reversible valve switches to the second energy source and with limit switches, which are in the actuator, activates the second energy source. For heating regulation is used regulator ROTOTERM MR-TR.



EMV 110 ROTODIVERT G Electric motor driven EMV110 actuator with installed 3-way cast iron diverter valve operate as diverting element in closed heating systems, such as for heating sanitary water or central heating or for switching between two heating sources; gas/oil boiler or solid fuel boiler.FEATURES• Compact version enables quick assembly and electrical connection.• Effectively and economically used as reversible element in systems where two

heating sources are used or for supply of heating to two consumers - heating and sanitary water.

• Dimensions of diverter valve from 3/4” to 2” are suitable for systems with solid fuel boiler

• Built-in relay enables 2-point control / SPST and is used for the parallel operation of several electric actuators.

• External el. connection with 1m long cable• Output signal at the end position of the actuator B-AB (e.g. for the control of the

circulation pump). • Possibility of manual control with lever.

ROTODIVERT G


in standby: 5VA (relay ON), 0VA (relay OFF)• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-60335-




• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 4x0.5mm2, L=1m• Position indication: on actuator cover• Possibility of manual control: with lever• Direction of rotation: not defined CW/CCW• Built in relay module: yes• Time: 16s/90°

Code Type Voltage A (DN) B D E H Kvs kg

10403 EMV 110 Rotodivert G F3L-3/4” 230VAC, 50Hz 20 105 169 92 140 8 2,1510404 EMV 110 Rotodivert G F3L-1” 230VAC, 50Hz 25 108 169 94 140 12 2,3310405 EMV 110 Rotodivert G F3L-1 1/4” 230VAC, 50Hz 32 115 174 97 140 18 2,7510406 EMV 110 Rotodivert G F3L-1 1/2” 230VAC, 50Hz 40 120 178 100 140 28 3,26*10407 EMV 110 Rotodivert G F3L-2” 230VAC, 50Hz 50 135 197 110 147 41 4,71


Valve characteristics: DN20-DN40 DN50Medium Temperature: +5°C..+110°C 120°CMax. pressure: 6bar 10barRotation angle: 90° 90°Valve body: Cast iron Cast ironInner part: PPS BrassStem: W.Nr.1.4305 BrassSealing: FKM, 2x EPDM 2x EPDM


X. COMPACT ROTARY ACTUATOR WITH 3-WAY BRASS BALL VALVE

ROTODIVERTFB–EMV110series630,631–3-wayballway

ROTODIVERT FB

Electric motor driven actuator EMV110 with installed 3-way brass ball valve operate as diverting or separating element in closed systems of remote (warm water), air blast or combined heating systems using either of the sources, remote or air blast heating.Features:• Special construction enables minimum valve leakage and maintenance-

free operation• Design for use in house applications and small industrial applications• Actuator is simply and quickly assembled and disassembled from valve by

means of “clip” system• Simple electrical connection “MOLEX connector”• Built-in relay module enables two wire control SPST

Actuator characteristics:• Supply voltage: 230VAC/50Hz• Power consumption: 7VA• Protection class (in accordance with EN-60335-1): II• Enclosure rating (in accordance with IEC60529):

IP40• In accordance with: EMC directive: 2004/108/EEC,• LV Directive: 2006/95/EEC, PAH directive: 2005/69/

EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: molex 3x0.75mm2, L=1m• Position indication: on actuator cover• Possibility of manual control: no• Direction of rotation: not defined CW/CCW• Built in relay module: yes• Opening/closing time: 8s/60°

Valve characteristics:• Connections: 3-port, compression connection• Medium: water, water with glycol up to max. 50%• Medium temperature: +5°C…90°C• PN class: PN25• Working pressure: max. 16bar• Material:

• Valve body: brass CuZn40Pb2• Ball: brass CuZn40Pb2 Cr• O-rings: FPM, EPDM

ConnectionA

(mm)B

(mm)C

(mm)D

(mm)Kvs

3(m /h)Kg

Rp 3/4" FFF 94 47 40 88 4,5 0,78

Compression fittings 22 94 (112*) 47 (56*) 40 (50*) 88 4,5 0,81

54

10

7

H

AB B

CD

* with fittings

B A

AB

B A

AB

B A

AB

0° 30° 60°

Code Type Voltage A B C D Kvs kg

*10568 EMV 110 630/89i0-3 DN20 - 3/4", FFF (inner thread), 230VAC, 50Hz

94 47 40 88 4,5 0,78

*10592 EMV 110 631/89i0-compr 22mm compression fittings 22mm, 230VAC, 50Hz 94(112*) 47(56*) 40(50*) 88 4,5 0,81* with fittings

Patent number:DE 10242727 (A1)



ROTODIVERTFC–EMV110series526/89i0–3-waydivertervalve

ROTODIVERT FC

Code Type Voltage C H L Kvs kg

*10567 EMV 110 526/89i0-3 DN20 - 3/4", MMM (external thread), 230VAC, 50Hz

3/4”MMM 128 93 7,5 0,83

*10569 EMV 110 526/89i0-4 DN25 - 1", MMM (external thread), 230VAC, 50Hz

1”MMM 127 93 7,5 0.92

*10590 EMV 110 526/89i0-compr 22mm compression fittings 22mm, 230VAC, 50Hz mm22 138 110 7,5 0,94*10591 EMV 110 526/89i0-compr 28mm compression fittings 28mm, 230VAC, 50Hz mm28 144 119 7,5 0,99

Electric motor driven actuator EMV110 with installed 3-way brass valve operate as diverting or separating element in closed systems of remote (warm water), air blast or combined heating systems using either of the sources, remote or air blast heating.Features:• Special construction enables minimum valve leakage and maintenance-

free operation• Design for use in house applications and small industrial applications• Actuator is simply and quickly assembled and disassembled from valve by

means of “clip” system• Simple electrical connection “MOLEX connector”• Built-in relay module enables two wire control SPST

Actuator characteristics:• Supply voltage: 230VAC/50Hz• Power consumption: 7VA• Protection class (in accordance with EN-60335-1): II• Enclosure rating (in accordance with IEC60529):

IP40• In accordance with: EMC directive: 2004/108/EEC,• LV Directive: 2006/95/EEC, PAH directive: 2005/69/

EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: molex 3x0.75mm2, L=1m• Position indication: on actuator cover• Possibility of manual control: no• Direction of rotation: not defined CW/CCW• Built in relay module: yes• Opening/closing time: 8s/60°

Valve characteristics:• Connections: 3-port, compression connection• Medium: water• Medium temperature: +5°C…90°C• Working pressure: max. 10bar• Material:

• Valve body: brass UNI EN 12165CW617N• Rotor axis: brass UNI EN 12165CW617N• O-rings: TPE, Polypropylene



XI. ELECTRIC ACTUATORS FOR ROTARY DIVERTER VALVES

EMV110..4380Rotodivert-M

Code Type Voltage Time Max Torque kg10394 EMV 110..4380 Rotodivert-M 230VAC, 50Hz 18s / 90° 8Nm 0,610408 EMV 110..4383 Rotodivert-M 24VAC, 50Hz 18s / 90° 8Nm 0,6

Electric actuator series EMV 110..4380 Rotodivert-M is designed for operating diverter valves “DIVERT” from 1/2” up to 1 1/4”.Features:• Compact version enables quick assembly and electrical connection• Rotation angle is fixed (90°).• Output signal at the end position of the actuator B-AB (e.g. for the control

of the circulation pump). • Possibility of manual control with lever.


in standby: 5VA (relay ON), 0VA (relay OFF)• Micro switch rating: 1(1)A, 250VAC• Protection class (in accordance with EN-60335-1): II• Enclosure rating (in accordance with IEC60529): IP44• In accordance with: EMC directive: 2004/108/EEC, LV

Directive: 2006/95/EEC, PAH directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 4x0.5mm2, L=1m• Position indication: on actuator cover• Possibility of manual control: with lever• Direction of rotation: not defined CW/CCW• Built in relay module: yes

UNI D2P Electric actuator series UNI D2P is designed for operating cast iron diverter valves “DIVERT G” (our production) from 3/4” up to 1 1/2”.Features:• With the button for manual control is possible to manual override – gear is

disengaged for as long the button is locked• Rotation angle is fixed (90°).• Output electric signal (L) at the end position of the actuator (circulation

pump control).


in standby: 5VA (relay ON), 0VA (relay OFF)• Micro switch rating: 1(1)A, 250VAC• Protection class (in accordance with EN-60335-1): II• Enclosure rating (in accordance with IEC60529):


LV Directive: 2006/95/EEC, PAH directive: 2005/69/EEC

• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 4x0.5mm2, L=1m• Position indication: handle on actuator cover• Possibility of manual control: yes• Direction of rotation: not defined CW/CCW• Built in relay module: yes

Code Type Voltage Time Max Torque kg12505 UNI D2P 10160 230VAC, 50Hz 16s/90° 7Nm 0,612510 UNI D2P 10163 24VAC, 50Hz 16s/90° 6Nm 0,6

Enclosed adapter kit for diverting valves Divert.

AdapterkitforDIVERTandEMV110..4680

Code Type58034 Adapter kit for DIVERT or DIVERT G and actuator UNI D2P20060 Adapter kit for actuators MV120..510 and MV 120..540 for diverting valves DIVERT, ROTOMIX


XII. ELECTRIC MOTOR ACTUATED BALL VALVES

EMV110series502/503 EMV110 series electric motor actuated ball valve is designed as closing element for heating systems (solar, remote, house-heating), for hot blast heating, cooling systems, swimming pools, petrochemical industry, alternative heating and agricultural purposes.Features:• Narrow width (53mm) enables mounting into manifold cabinets

(55mm raster)• Built-in relay module enables two wire control SPST• Simple disassembly of the drive with clip• Rotation angle is fixed (90°).• Output electric signal (L) at the end position of the actuator

(circulation pump control)

EMV 110 series 502

DN A B C D Kvs kg15 - 1/2” 112 103,5 17,5 63 17 0,8620 - 3/4” 124 104,5 19,5 57 41 0,8225 - 1” 129 105,5 23,5 68 68 0,98

Code Type DN Voltage Time MAX Torque

*10502 EMV 110 502/7930-2 15 - 1/2” 230VAC, 50Hz 30s / 90° 8Nm*10503 EMV 110 502/7930-3 20 - 3/4” 230VAC, 50Hz 30s / 90° 8Nm*10504 EMV 110 502/7930-4 25 - 1” 230VAC, 50Hz 30s / 90° 8Nm*10508 EMV 110 502/7933-2 15 - 1/2” 24VAC, 50Hz 30s / 90° 8Nm*10509 EMV 110 502/7933-3 20 - 3/4” 24VAC, 50Hz 30s / 90° 8Nm*10510 EMV 110 502/7933-4 25 - 1” 24VAC, 50Hz 30s / 90° 8Nm


EMV 110 series 503

DN A B C D E Kvs kg15 - 1/2” 112 103,5 17,5 99 86 17 0,8920 - 3/4” 124 104,5 19,5 90,5 77,5 41 0,8725 - 1” 129 105,5 23,5 104 90 68 1,04




Ends: female/female

Ends: male/ female hose union


*24VAC/50Hz• Power consumption: 7VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance

with EN-60335-1): II• Enclosure rating (in accordance

with IEC60529): IP44• In accordance with: EMC directive:

2004/108/EEC, LV Directive: 2006/95/EEC, PAH directive: 2005/69/EEC

• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non

condensed)• Storage temperature: -10…+70°C• Connection cord: 4x0.5mm2,

L=0.3m

• Position indication: on actuator cover

• Possibility of manual control: no• Direction of rotation: not defined

CW/CCW• Built in relay module: yes

Valve characteristics:• Medium: water, nonaggressive

fluid, air, glycol < 50%• Medium temperature:

+5°C…90°C• Working pressure: max. 16bar• Material:

• Valve body: brass CuZn40Pb2 Ni

• Ball: brass CuZn40Pb2 Cr• O-rings: PTFE, FPM,EPDM


EMV110series602/603

EMV110 series electric motor actuated ball valve is designed as closing element for heating systems (solar, remote, house-heating), for hot blast heating, cooling systems, swimming pools, petrochemical industry, alternative heating and agricultural purposes.Features:• Compact version enables quick assembly and electrical

connection without opening drive• Clutch assembly enables manual opening/closing and

unlocking of the valve if it locks during longer stand-stills.• Simple disassembly of the drive with two screws only• Rotation angle is fixed (90°).• Output electric signal (L) at the end position of the actuator



EMV 110 series 602


*24VAC/50Hz• Power consumption: 7VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-

60335-1): II• Enclosure rating (in accordance with



• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 4x0.5mm2, L=1.5m• Position indication: on actuator cover• Possibility of manual control: yes• Direction of rotation: not defined CW/CCW• Built in relay module: yes


EMV 110 series 603

DN A B C D E Kvs kg15 - 1/2” 112 103,5 17,5 99 86 17 0,8920 - 3/4” 124 104,5 19,5 90,5 77,5 41 0,8725 - 1” 129 105,5 23,5 104 90 68 1,04


DN A B C D H Kvs kg15 - 1/2” 139 121,5 17,5 63 79 17 0,9020 - 3/4” 144 124,5 19,5 57 85 41 0,8325 - 1” 153 129,5 23,5 68 93 68 1,0432 - 1 1/4” 163 134,5 28,5 81 103 123 1,24

Code Type DN Voltage

10102 EMV 110 602/4230-2 15 - 1/2” 230VAC, 50Hz10103 EMV 110 602/4230-3 20 - 3/4” 230VAC, 50Hz10104 EMV 110 602/4230-4 25 - 1” 230VAC, 50Hz10105 EMV 110 602/4230-5 32 - 1 1/4” 230VAC, 50Hz


10112 EMV 110 603/4230-2 15 - 1/2” 230VAC, 50Hz10113 EMV 110 603/4230-3 20 - 3/4” 230VAC, 50Hz10114 EMV 110 603/4230-4 25 - 1” 230VAC, 50Hz10115 EMV 110 603/4230-5 32 - 1 1/4” 230VAC, 50Hz


*10120 EMV 110 602/4233-2 15 - 1/2” 24VAC, 50Hz*10121 EMV 110 602/4233-3 20 - 3/4” 24VAC, 50Hz*10122 EMV 110 602/4233-4 25 - 1” 24VAC, 50Hz*10123 EMV 110 602/4233-5 32 - 1 1/4” 24VAC, 50Hz


*10116 EMV 110 603/4233-2 15 - 1/2” 24VAC, 50Hz*10117 EMV 110 603/4233-3 20 - 3/4” 24VAC, 50Hz*10118 EMV 110 603/4233-4 25 - 1” 24VAC, 50Hz*10119 EMV 110 603/4233-5 32 - 1 1/4” 24VAC, 50Hz

It allows easy manual control

It allows easy manual control

Valve characteristics:• Medium: water,

nonaggressive fluid, air, glycol < 50%

• Medium temperature: +5°C…110°C

• Working pressure: max.16bar

• Material:• Valve body: brass

CuZn40Pb2 Ni• Ball: brass CuZn40Pb2 Cr• O-rings: PTFE, FPM,

EPDM

Ends: female/female




EMV110series800/801 EMV110 series electric motor actuated ball valve is designed as closing element for heating systems (solar, remote, house-heating), for hot blast heating, cooling systems, swimming pools, chemical and process industry, petrochemical industry, alternative heating and agricultural purposes.Features:• Wide range of options (electric motor (synchronous,

asynchronous), possibility of a relay module (SPST)…)• Compact version enables quick assembly and electrical

connection without opening drive• Clutch assembly enables manual opening/closing and unlocking

of the valve if it locks during longer stand-stills.• Rotation angle is fixed (90°).• Output electric signal (L) at the end position of the actuator


EMV 110 series 800

Actuator characteristics:• Motor type control: 2-point ON/OFF• Supply voltage: 230VAC/50Hz,

*24VAC/50Hz• Power consumption: 7VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with

EN-60335-1): I• Enclosure rating (in accordance with




condensed)• Storage temperature: -10…+70°C• Connection cord: 5x0.5mm2, L=1.5m• Position indication: support of the valve• Possibility of manual control: yes


EMV110..530 EMV110..230 (with relay module)

Built-in relay module (SPST control)


10212 EMV 110 800/530-2 15 - 1/2” 230VAC, 50Hz 30s / 90° 6Nm10213 EMV 110 800/530-3 20 - 3/4” 230VAC, 50Hz 30s / 90° 6Nm10214 EMV 110 800/530-4 25 - 1” 230VAC, 50Hz 30s / 90° 6Nm*10219 EMV 110 800/533-2 15 - 1/2” 24VAC, 50Hz 30s / 90° 6Nm*10220 EMV 110 800/533-3 20 - 3/4” 24VAC, 50Hz 30s / 90° 6Nm*10221 EMV 110 800/533-4 25 - 1” 24VAC, 50Hz 30s / 90° 6Nm





Built-in reversible motor

Standard version

DN A B C D Kvs kg15 - 1/2” 148 130 17,5 63 17 1,0020 - 3/4” 157 135 22,0 74 41 1,2025 - 1” 164 138 25,5 88 68 1,40

Ends: female/female

• Direction of rotation: not defined CW/CCW

• Built in relay module: option Valve characteristics:• Medium: water,






EPDM





DN A B C D E Kvs kg15 - 1/2” 148 130 17,5 63 99 17 1,1020 - 3/4” 157 135 22,0 74 110 41 1,3025 - 1” 164 138 25,5 88 127 68 1,50










EMV 110 series 801


Built-in reversible motorand relay module

(SPST control)


(SPST control)

Built-in relay module (SPST control)


Standard version



EMV110series820 EMV110 series electric motor actuated ball valve is designed as closing element for heating systems (solar, remote, house-heating), for hot blast heating, cooling systems, swimming pools, chemical and process industry, petrochemical industry, alternative heating and agricultural purposes.Features:• Wide range of options (electric motor

(synchronous, asynchronous), possibility of a relay module (SPST)…)

• Rotation angle is fixed (90°).• Output electric signal (L) at the end position of

the actuator (circulation pump control)

EMV 110 series 820

Actuator characteristics:• Supply voltage: 230VAC/50Hz, *24VAC/50Hz• Power consumption: 5VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-


IEC60529): IP54• In accordance with: EMC directive: 2004/108/


• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C

DN A B Kvs kg32- 1 1/4” 220 102 123 2,4040 - 1 1/2” 230 106 198 3,0050 - 2” 242 129 290 4,10



11225 EMV 110 820/2410-5 32- 1 1/4” 230VAC, 50Hz 105s / 90° 25Nm11226 EMV 110 820/2410-6 40 - 1 1/2” 230VAC, 50Hz 105s / 90° 25Nm11227 EMV 110 820/2410-7 50 - 2” 230VAC, 50Hz 105s / 90° 25Nm*11290 EMV 110 820/2413-5 32- 1 1/4” 24VAC, 50Hz 105s / 90° 25Nm*11291 EMV 110 820/2413-6 40 - 1 1/2” 24VAC, 50Hz 105s / 90° 25Nm*11292 EMV 110 820/2413-7 50 - 2” 24VAC, 50Hz 105s / 90° 25Nm


*11228 EMV 110 820/2310-5 32- 1 1/4” 230VAC, 50Hz 105s / 90° 25Nm*11229 EMV 110 820/2310-6 40 - 1 1/2” 230VAC, 50Hz 105s / 90° 25Nm*11230 EMV 110 820/2310-7 50 - 2” 230VAC, 50Hz 105s / 90° 25Nm* 11293 EMV 110 820/2313-5 32- 1 1/4” 24VAC, 50Hz 105s / 90° 25Nm*11294 EMV 110 820/2313-6 40 - 1 1/2” 24VAC, 50Hz 105s / 90° 25Nm*11295 EMV 110 820/2313-7 50 - 2” 24VAC, 50Hz 105s / 90° 25Nm

Ends: female/female

• Connection cord: 5x0.5mm2, L=1.5m


• Possibility of manual control: yes• Direction of rotation: defined• Built in relay module: option

Valve characteristics:• Medium: water, nonaggressive


+5°C…110°C• Working pressure: max.16bar• Material:


• Ball: brass CuZn40Pb2 Cr• O-rings: PTFE, FPM, EPDM

EMV110..2410 EMV110..2310 (with relay module)



(SPST control)


XII. ELECTRIC ACTUATORS FOR BALL VALVES

UNI 2P 859 UNI 2P 589 series electric motor actuated ball valve is designed as closing element for heating systems (solar, remote, house-heating), for hot blast heating, cooling systems, swimming pools, chemical and process industry, petrochemical industry, alternative heating and agricultural purposes.Features:• Rotation angle is fixed (90°).• Output electric signal (L) at the end position of the

actuator (circulation pump control)

UNI 2P 859

Actuator characteristics:• Supply voltage: 230VAC/50Hz• Power consumption: 9VA working,

in standby: 5VA (relay ON), 0VA (relay OFF)

• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-




• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 4x0.5mm2, L=1m• Position indication: handle on actuator

cover

DN H C CH kg Kvs40 - 1 1/2” 174 106,5 55 2,10 19850 - 2” 181 124,5 69 2,80 290


12686 UNI 2P 859 10320 - 6 DN40- 1 1/2" 230VAC, 50Hz 32s / 90° 15Nm12687 UNI 2P 859 10320 - 7 DN50- 2" 230VAC, 50Hz 32s / 90° 15Nm

• Possibility of manual control: yes

Valve characteristics:• Connections: internal thread• Medium: water,






EPDM, HNBR

Programmable irrigation of agricultural land Heating sanitary water in boiler with solar collector array


XIII. PROGRAMMABLE MOTORIZED BALL VALVE

EMV110series602/1590BEMV110 – 1590B is used in system, where in case of power failure opens/closes ball valve. It can be used as safety element in various systems.

Features:• Manual ball valve opening/closing possibility • Setting the position of the ball valve in case of power failure - open/

closed • Sound signaling possibility - additional connection of beeper• Battery power supply - 4x LR6-1.5V/AA-alkaline Duracell (batteries are

inserted in the actuator)• Long lifespan and operation reliability


DN H L Kvs kg20 - 3/4” 152 57 41 1.1025 - 1” 163 68 68 1.3032 - 1 1/4” 173 81 123 1.50

Code Type DN Voltage Time Max Torque

10447 EMV 110 602/1590-3/B DN20 20 - 3/4” 230VAC, 50Hz 25s / 90° 8Nm10448 EMV 110 602/1590-4/B DN25 25 - 1” 230VAC, 50Hz 25s / 90° 8Nm10449 EMV 110 602/1590-5/B DN32 32 - 1 1/4” 230VAC, 50Hz 25s / 90° 8Nm

SOLID FUEL BOILER: In case of power failure it opens the flow, which passes all control elements.The installation must be executed properly, that it allows water circulation in the system.

PROTECTION OF ELEMENTS OF THE SYSTEM: In case of power failure it closes return line, thus prevents overheating of heat exchanger.

Actuator characteristics:• Supply voltage: 230VAC/50Hz• Batteries: Battery power supply 4x LR6-1.5V/AA• Electric output: 6VDC in case of power failure• Protection class (in accordance with EN-60335-1): I• Enclosure rating (in accordance with IEC60529): IP55• In accordance with: EMC directive: 2004/108/EEC,

LV Directive: 2006/95/EEC, PAH directive: 2005/69/EEC

• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 3x0.75mm2, L=1.5m• Position indication: support of the valve• Possibility of manual control: yes• Direction of rotation: not defined CW/CCW

Valve characteristics:• Connections: internal thread• Medium: water, nonaggressive fluid, air, glycol < 50%• Medium temperature: +5°C…110°C• Working pressure: max.16bar• Material:

• Valve body: brass CuZn40Pb2 Ni• Ball: brass CuZn40Pb2 Cr• O-rings: PTFE, FPM, EPDM

Ends: female/female



DIGI 111 DIGI 111 is an electrically powered ball valve with a built in digital programming module which allows programming the opening and closing of the valve for a week in advance. It is designed for use in heating applications (programmed zone heating), industry (programmed opening of network installations for technical gases (compressed air, oxygen, carbon dioxide) programmed discharge of containers), watering and irrigation (lawns, orchards, vineyards, green houses, gardens and fields), animal breeding (programmed water supply for cattle and poultry).

DIGI 111

Actuator characteristics:• Supply voltage: 230VAC/50Hz• Power consumption: 7VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-60335-1): I• Enclosure rating (in accordance with IEC60529):

IP40• In accordance with: EMC directive: 2004/108/EEC,• LV Directive: 2006/95/EEC, PAH directive:

2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 3x0.75mm2, L=1.5m• Position indication: support of the valve• Possibility of manual control: yes• Direction of rotation: not defined CW/CCW• Built in relay module: no

Valve characteristics:• Medium: water, nonaggressive fluid, air,

glycol < 50%• Medium temperature: +5°C…110°C• Working pressure: max.16bar• Material:




*15222 DIGI 111 - 2 15 - 1/2” 230VAC, 50Hz 30s / 90° 8Nm*15223 DIGI 111 - 3 20 - 3/4” 230VAC, 50Hz 30s / 90° 8Nm*15224 DIGI 111 - 4 25 - 1” 230VAC, 50Hz 30s / 90° 8Nm

DN A B C D Kvs kg15 - 1/2” 177 159 18 63 11 1,120 - 3/4” 185 163 22 74 21,2 1,325 - 1” 189 166,5 25,5 88 54,9 1,5

DN A B Kvs kg32 - 1 1/4” 231 102 123 2,640 - 1 1/2” 241 106 198 3,250 - 2” 253 129 290 4,3

Code Type DN Voltage Time*15235 DIGI 111 - 5 32 - 1 1/4” 230VAC, 50Hz 105s / 90°*15236 DIGI 111 - 6 40 - 1 1/2” 230VAC, 50Hz 105s / 90°*15237 DIGI 111 - 7 50 - 2” 230VAC, 50Hz 105s / 90°


Features:• Manual ball valve opening/closing possibility • Programmable weekly timer (16x switch

points; 8x ON, 8x OFF)• Battery support for programmable timer• Output electric signal (L) at the end position

of the actuator (circulation pump control)

Ends: female/female

Ends: female/female



TEC 44 TEC 44 is a microprocessor controlled drain for removing heavily contaminated condensate from compressed air systems. Installation of the TEC 44 enables complete emptying of the accumulated condensate. Features:• Microprocessor Technology• 10 program settings• The possibility of remote triggering• Digital display program• LED indication (valve open) • Battery support in case of power failure• Test button

Code Type DN Voltage*10092 TEC44 1/2” BSP 230VAC 15 - 1/2” 230VAC, 50Hz*10153 TEC44 1” BSP 230VAC 25 - 1” 230VAC, 50Hz

Automatic release condensate from compressed air systems

Actuator characteristics:• Supply voltage: 230VAC/50Hz• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-60335-1): I• Enclosure rating (in accordance with IEC60529): IP55• In accordance with: EMC directive: 2004/108/EEC,• LV Directive: 2006/95/EEC, PAH directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 3x0.75mm2, L=1.5m• Position indication: support of the valve• Possibility of manual control: • Direction of rotation: not defined CW/CCW• Built in relay module: no

Valve characteristics:• Connections: internal thread• Medium: water, nonaggressive fluid, air, glycol < 50%• Medium temperature: +5°C…110°C• Working pressure: max. 16bar• Material:


Ends: female/female


EMV110series710–Lshapedballvalve–verticalversion EMV110 series electric motor actuated ball valve enables diverting flow in directions A-B and B-C, closed. Valve usage offers many possibilities in heating systems (solar, remote, house-heating), sanitary water applications, hot blast heating, cooling systems, swimming pools, chemical and process industry, petrochemical industry, alternative heating and agricultural purposes. Features:• Wide range of options (electric motor (synchronous, asynchronous),

possibility of a relay module (working contact - SPST)…)• Clutch assembly enables manual opening/closing and unlocking of the valve

if it locks during longer stand-stills.• Rotation angle is fixed (180°).• L shaped ball valve – no mixing of liquids A-C• Output electric signal (L) at the end position of the actuator (circulation

pump control)

XIV. 3-WAY ELECTRIC MOTOR ACTUATED BALL VALVES

Actuator characteristics:• Supply voltage: 230VAC/50Hz, *24VAC/50Hz• Power consumption: 7VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-60335-1): I• Enclosure rating (in accordance with IEC60529):

IP55• In accordance with: EMC directive: 2004/108/EEC,• LV Directive: 2006/95/EEC• PAH directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 5x0.5mm2, L=1.5m• Position indication: support of the valve• Possibility of manual control: yes• Direction of rotation: not defined CW/CCW• Built in relay module: option

Valve characteristics:• Connections: 3-port, internal thread• Medium: water, nonaggressive fluid, air,

glycol < 50%• Medium temperature: +5°C…110°C• Working pressure: max. 16bar• Material:



DN A B C D Kvs kg15 - 1/2” 174 135 39 74 5 0,920 - 3/4” 174 135 39 74 7 1,225 - 1” 185 139 46 88 11 1,5



Built-in relay module - L shaped ball valve

Standard version - L shaped ball valve



EMV110 710/550, EMV 110 710/553

EMV110 710/250, EMV 110 710/253


UNI2Pseries710–Lshapedballvalve–verticalversion



EMV110-series830–Tshapedballvalve–horizontalversionEMV110 series electric motor actuated ball valve enables diverting flow in all directions, including the possibility of closing flow for each port.Valve usage offers many possibilities in heating systems (solar, remote, house-heating), sanitary water applications, hot blast heating, cooling systems, swimming pools, chemical and process industry, petrochemical industry, alternative heating and agricultural purposes. Features:• T shaped ball valve – flow in all directions• Output electric signal (L) at the end position of the actuator (circulation

pump control)


Actuator characteristics:• Supply voltage: 230VAC/50Hz, *24VAC/50Hz• Power consumption: 7VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-60335-

1): I• Enclosure rating (in accordance with IEC60529):



2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 5x0.5mm2, L=1.5m• Position indication: support of the valve• Possibility of manual control: yes• Direction of rotation: defined• Built in relay module: no

Valve characteristics:• Connections: 3-port, internal thread• Medium: water, nonaggressive fluid, air,

glycol < 50%• Medium temperature: +5°C…110°C• Working pressure: max. 16bar• Material:

• Valve body: brass CuZn40Pb2 Ni• Ball: brass CuZn40Pb2 Cr• O-rings: PTFE, FKM, EPDM

DN A B C D E F Kvs kg20 - 3/4” 164 136 24 80 30 73 5,5 1,725 - 1” 172 140 27 114 57 88 9,2 2,4

Rotation angle: 50s/180°




10323 EMV 110 830/590-3 20 - 3/4” 230VAC, 50Hz 25s / 90° 6Nm

10324 EMV 110 830/590-4 25 - 1” 230VAC, 50Hz 25s / 90° 6Nm

*10325 EMV 110 830/593-3 20 - 3/4” 24VAC, 50Hz 25s / 90° 6Nm

*10326 EMV 110 830/593-4 25 - 1” 24VAC, 50Hz 25s / 90° 6Nm


*10020 EMV 110 830/570-3 20 - 3/4” 230VAC, 50Hz 50s / 180° 6Nm

*10021 EMV 110 830/570-4 25 - 1” 230VAC, 50Hz 50s / 180° 6Nm

*10327 EMV 110 830/573-3 20 - 3/4” 24VAC, 50Hz 50s / 180° 6Nm

*10328 EMV 110 830/573-4 25 - 1” 24VAC, 50Hz 50s / 180° 6Nm

possible flow

possible flow

Ends: female/female/female


UNI3P-series830–Tshapedballvalve–horizontalversion




EMV110-series930–Tshapedballvalve–horizontalversionEMV110 series electric motor actuated ball valve enables diverting flow in all directions, including the possibility of closing flow for each port.Valve usage offers many possibilities in heating systems (solar, remote, house-heating), sanitary water applications, hot blast heating, cooling systems, swimming pools, chemical and process industry, petrochemical industry, alternative heating and agricultural purposes. Features:• T shaped ball valve – flow in all directions• Output electric signal (L) at the end position of the actuator (circulation

pump control)

Actuator characteristics:• Supply voltage: 230VAC/50Hz, *24VAC/50Hz• Power consumption: 5VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-60335-1): I• Enclosure rating (in accordance with IEC60529): IP54• In accordance with: EMC directive: 2004/108/EEC,• LV Directive: 2006/95/EEC, PAH directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 5x0.5mm2, L=1.5m• Position indication: on actuator cover• Possibility of manual control: yes• Direction of rotation: defined• Built in relay module: no

Valve characteristics:• Connections: 3-port, internal thread• Medium: water, nonaggressive fluid, air, glycol < 50%• Medium temperature: +5°C…110°C• Working pressure: max. 16bar• Material:

• Valve body: brass CuZn40Pb2 Ni• Ball: brass CuZn40Pb2 Cr• O-rings: PTFE, FKM, EPDM


possible flow

possible flow

DN A B C D E F Kvs kg32- 1 1/4” 226 193 33 130 64 100 20,0 440 - 1 1/2” 239 200 39 150 70 115 37,2 550 - 2” 254 207 47 170 90 135 48,7 7


10025 EMV 110 930/410-5 32- 1 1/4” 230VAC, 50Hz 105s / 90° 25Nm

10026 EMV 110 930/410-6 40 - 1 1/2” 230VAC, 50Hz 105s / 90° 25Nm

10027 EMV 110 930/410-7 50 - 2” 230VAC, 50Hz 105s / 90° 25Nm

*10296 EMV 110 930/413-5 32- 1 1/4” 24VAC, 50Hz 105s / 90° 25Nm

*10297 EMV 110 930/413-6 40 - 1 1/2” 24VAC, 50Hz 105s / 90° 25Nm

*10298 EMV 110 930/413-7 50 - 2” 24VAC, 50Hz 105s / 90° 25Nm


*10299 EMV 110 930/4G0-5 32- 1 1/4” 230VAC, 50Hz 210s / 180° 25Nm

*10300 EMV 110 930/4G0-6 40 - 1 1/2” 230VAC, 50Hz 210s / 180° 25Nm

*10301 EMV 110 930/4G0-7 50 - 2” 230VAC, 50Hz 210s / 180° 25Nm

*10302 EMV 110 930/4G3-5 32- 1 1/4” 24VAC, 50Hz 210s / 180° 25Nm

*10303 EMV 110 930/4G3-6 40 - 1 1/2” 24VAC, 50Hz 210s / 180° 25Nm

*10304 EMV 110 930/4G3-7 50 - 2” 24VAC, 50Hz 210s / 180° 25Nm





XV. ELECTRIC MOTOR ACTUATED BALL VALVES FOR COOLING SYSTEMS

EMV110-series800HL

EMV110 series HL electric motor actuated ball valve is designed for use in cooling systems for media temperatures up to -15°C. Actuator and valve are connected by a rigid coupling. Valve usage offers many possibilities in cooling systems, climatisation, thermoregulation, water chillers, drinking water (schools, hospitals and offices).

Features:• Output electric signal (L) at the end

position of the actuator (circulation pump control)


*24VAC/50Hz• Power consumption: 7VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with

EN-60335-1): I• Enclosure rating (in accordance with

IEC60529): IP55


11412 EMV 110 800/530HL-2 15 - 1/2” 230VAC, 50Hz 30s / 90° 6Nm11413 EMV 110 800/530HL-3 20 - 3/4” 230VAC, 50Hz 30s / 90° 6Nm11414 EMV 110 800/530HL-4 25 - 1” 230VAC, 50Hz 30s / 90° 6Nm*11422 EMV 110 800/533HL-2 15 - 1/2” 24VAC, 50Hz 30s / 90° 6Nm*11423 EMV 110 800/533HL-3 20 - 3/4” 24VAC, 50Hz 30s / 90° 6Nm*11424 EMV 110 800/533HL-4 25 - 1” 24VAC, 50Hz 30s / 90° 6Nm

DN A B C D Kvs kg15 - 1/2” 182 164 17,5 64 17 1,0920 - 3/4” 191 169 22,0 74 41 1,2425 - 1” 198 173 25,5 88 68 1,49

• In accordance with: EMC directive: 2004/108/EEC,

• LV Directive: 2006/95/EEC, PAH directive: 2005/69/EEC


condensed)• Storage temperature: -10…+70°C• Connection cord: 5x0.5mm2, L=1.5m• Position indication: support of the valve• Possibility of manual control: yes• Direction of rotation: not defined CW/

CCW• Built in relay module: no

EMV110-series820HLFeatures:• Output electric signal (L) at the end

position of the actuator (circulation pump control)


*24VAC/50Hz• Power consumption: 5VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-


IEC60529): IP54

• In accordance with: EMC directive: 2004/108/EEC,



condensed)• Storage temperature: -10…+70°C• Connection cord: 5x0.5mm2, L=1.5m• Position indication: on actuator cover• Possibility of manual control: yes• Direction of rotation: defined• Built in relay module: no


11238 EMV 110 820/410HL-5 32- 1 1/4” 230VAC, 50Hz 105s / 90° 25Nm11239 EMV 110 820/410HL-6 40 - 1 1/2” 230VAC, 50Hz 105s / 90° 25Nm11240 EMV 110 820/410HL-7 50 - 2” 230VAC, 50Hz 105s / 90° 25Nm*11241 EMV 110 820/413HL-5 32- 1 1/4” 24VAC, 50Hz 105s / 90° 25Nm*11242 EMV 110 820/413HL-6 40 - 1 1/2” 24VAC, 50Hz 105s / 90° 25Nm*11243 EMV 110 820/413HL-7 50 - 2” 24VAC, 50Hz 105s / 90° 25Nm

DN A B C D Kvs kg32 - 1 1/4” 250 222 28 101 123 2,840 - 1 1/2” 260 225 35 105 198 3,450 - 2” 272 228 44 130 290 4,5

Valve characteristics:• Connections: internal thread• Medium: water, nonaggressive


-15°C…80°C• Working pressure: max. 25bar• Material:



Valve characteristics:• Connections: internal thread• Medium: water, nonaggressive


-15°C…80°C• Working pressure: max. 16bar• Material:






XV. ELECTRIC MOTOR ACTUATED BALL VALVES FOR COOLING SYSTEMS UNI2P-series800HL


XVI. 3-WAY ELECTRIC MOTOR ACTUATED BALL VALVES FOR COOLING SYSTEMS EMV110-series710HL

Features:• Output electric signal (L) at the end position

of the actuator (circulation pump control)Actuator characteristics:• Supply voltage: 230VAC/50Hz• Power consumption: 7VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-



2004/108/EEC,




L=1.5m• Position indication: support of the

valve• Possibility of manual control: yes• Direction of rotation: not defined

CW/CCW

EMV110-series830HL,930HLFeatures:• Output electric signal (L) at the end position

of the actuator (circulation pump control)Actuator characteristics:• Supply voltage: 230VAC/50Hz• Power consumption: 7VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-



2004/108/EEC,



condensed)• Storage temperature: -10…+70°C• Connection cord: 5x0.5mm2, L=1.5m• Position indication: support of the valve• Possibility of manual control: yes• Direction of rotation: definedValve characteristics:• Connections: internal thread


11312 EMV 110 710/550HL-2 15 - 1/2” 230VAC, 50Hz 60s / 180° 6Nm11313 EMV 110 710/550HL-3 20 - 3/4” 230VAC, 50Hz 60s / 180° 6Nm11314 EMV 110 710/550HL-4 25 - 1” 230VAC, 50Hz 60s / 180° 6Nm

DN A B C D Kvs kg15 - 1/2” 174 135 39 74 5 0,920 - 3/4” 174 135 39 74 7 1,225 - 1” 185 139 46 88 11 1,5


11513 EMV 110 830/590HL-3 20 - 3/4” 230VAC, 50Hz 25s / 90° 6Nm11514 EMV 110 830/590HL-4 25 - 1” 230VAC, 50Hz 25s / 90° 6Nm

DN A B C D E F Kvs kg20 - 3/4” 202 178 24 80 30 73 5,5 1,825 - 1” 210 183 27 114 57 88 9,2 2,5


11325 EMV 110 930/410HL-5 32- 1 1/4” 230VAC, 50Hz 105s / 90° 25Nm

11326 EMV 110 930/410HL-6 40 - 1 1/2” 230VAC, 50Hz 105s / 90° 25Nm

11327 EMV 110 930/410HL-7 50 - 2” 230VAC, 50Hz 105s / 90° 25Nm

DN A B C D E F Kvs kg32- 1 1/4” 256 223 33 130 64 100 20,0 4,440 - 1 1/2” 269 230 39 150 70 115 37,2 5,450 - 2” 284 237 47 170 90 135 48,7 7,4

• Built in relay module: noValve characteristics:• Connections: internal thread• Medium: water, nonaggressive


-15°C…+80°C• Working pressure: max. 16bar• Material:



• Medium: water, nonaggressive fluid, air, glycol < 50%

• Medium temperature: -15°C…80°C

• Working pressure: max. 16bar• Material:


• Ball: brass CuZn40Pb2 Cr• O-rings: PTFE, FKM,

EPDM





XVI. 3-WAY ELECTRIC MOTOR ACTUATED BALL VALVES FOR COOLING SYSTEMS UNI2P-series710HL


XVII. ELECTRIC ACTUATORS FOR BALL VALVES

EMV110..electricmotoractuators

Code Type Data20119 EMV 110..4230 30s/90°, max. 8Nm, IP44, 230VAC, 50Hz Valve series

602/603*20115 EMV 110..4233 30s/90°, max. 8Nm, IP44, 24VAC, 50Hz*20042 EMV 110 4230-S2 30s/90°, max. 8Nm, IP44, 230VAC, 50Hz, brezpotencialni izhod v

kočnih legah20036 EMV 110..530 30s/90°, max. 6Nm, IP55, 230VAC, 50Hz Valve series

800/80120117 EMV 110..230 30s/90°, max. 6Nm, IP55, 230VAC, 50Hz, z vgrajenim rele modulom20123 EMV 110..233 30s/90°, max. 6Nm, IP55, 24VAC, 50Hz, z vgrajenim rele modulom10189 EMV 110..533 30s/90°, max. 6Nm, IP55, 24VAC, 50Hz20036 EMV 110..550 60s/90°, max. 6Nm, IP55, 230VAC, 50Hz Valve series 71020117 EMV 110..250 60s/90°, max. 6Nm, IP55, 230VAC, 50Hz, z vgrajenim rele modulom20123 EMV 110..253 60s/90°, max. 6Nm, IP55, 24VAC, 50Hz, z vgrajenim rele modulom10189 EMV 110..553 60s/90°, max. 6Nm, IP55, 24VAC, 50Hz20118 EMV 110..590 25s/90°, max. 6Nm, IP55, 230VAC, 50Hz Valve series 83020114 EMV 110.. 593 25s/90°, max. 6Nm, IP55, 24VAC, 50Hz20103 EMV 110..570 50s/90°, max. 6Nm, IP55, 230VAC, 50Hz20037 EMV 110..2410/820 105s/90°, max. 25Nm, IP54, 230VAC, 50Hz Valve series 820

20040 EMV 110..2413/820 105s/90°, max. 25Nm, IP54, 24VAC, 50Hz 20038 EMV 110..2410/930 105s/90°, max. 25Nm, IP54, 230VAC, 50Hz Valve series 93020041 EMV 110..2413/930 105s/90°, max. 25Nm, IP54, 24VAC, 50Hz

UNI 2P UNI 2P series electric actuator is designed for operating valves series 800, 801, 602, 603, 35i (with additional valve support).Features:• Actuator has a fixed rotation (90°)• Possibility of manual override with button on actuator cover (gear is

disengaged for as long the button is locked).• Output electric signal (L) at the end position of the actuator (circulation

pump control)

Actuator characteristics:• Motor type control: 2-point ON/OFF• Supply voltage: 230VAC/50Hz• Power consumption: 9VA working,

in standby: 5VA (relay ON), 0VA (relay OFF)• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-60335-1): II• Enclosure rating (in accordance with IEC60529): IP44• In accordance with: EMC directive: 2004/108/EEC,• LV Directive: 2006/95/EEC, PAH directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 4x0.5mm2, L=1m• Position indication: on actuator cover• Possibility of manual control: yes• Direction of rotation: not defined CW/CCW• Built in relay module: yes

Code Type Voltage Time Max Torque kg12508 UNI 2P 10160 230VAC, 50Hz 16s/90° 7Nm 0,6712500 UNI 2P 10320 230VAC, 50Hz 32s/90° 15Nm 0,6712511 UNI 2P 10323 24VAC, 50Hz 32s/90° 15Nm 0,6712501 UNI 2P 10490 230VAC, 50Hz 49s/90° 15Nm 0,6712512 UNI 2P 10493 24VAC, 50Hz 49s/90° 15Nm 0,67

125

78

92


UNI 3P UNI 3P series electric actuator is designed for operating valves series 690, 35i 35IM.Features:• Actuator has a fixed rotation (90°)• Possibility of manual override with button on actuator cover (gear is disengaged for as

long the button is locked).• Output electric signal (L) at the end position of the actuator (circulation pump control)

and premounted auxiliary switches at both end positions.

Actuator characteristics:• Motor type control: 3-point• Supply voltage: 230VAC/50Hz• Power consumption: 6VA, 0VA in standby• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-




directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord 2x: 4x0.5mm2, L=1m• Position indication: on actuator cover• Possibility of manual control: yes• Direction of rotation: defined• Built in relay module: no

Code Type Voltage Time Max Torque kg12517 UNI 3P 20240 230VAC, 50Hz 24s/90° 9Nm 0,612502 UNI 3P 20480 230VAC, 50Hz 48s/90° 15Nm 0,6*12513 UNI 3P 20483 24VAC, 50Hz 48s/90° 15Nm 0,612503 UNI 3P 20730 230VAC, 50Hz 73s/90° 15Nm 0,6*12514 UNI 3P 20733 24VAC, 50Hz 73s/90° 15Nm 0,612506 UNI 3P 21470 230VAC, 50Hz 147s/90° 15Nm 0,6*12515 UNI 3P 21473 24VAC, 50Hz 147s/90° 10Nm 0,6*12507 UNI 3P 21780 230VAC, 50Hz 178s/90° 12Nm 0,6*12516 UNI 3P 21783 24VAC, 50Hz 178s/90° Nm 0,6

Adapter kit of various manufacturers are enclosed (code 58024). On special order are avaible adapters for other valves (see table adapters below).

XVIII.Adapterkits,accessoriesCode Description

58023 UNI-ISO 5211 F03/F04 for ISO ball valves series 690, 35I in 35IM (1/2" - 1 1/4")

58019 UNI-ISO 5211 F05 (nadgradnja k F03/F04) for ISO ball valves series 690, 35I in 35IM (1 1/2" - 2")

58000 FIRŠT serija 800, 80158024 FIRŠT (ROTOMIX, ROTOMIX G), ESBE (VRG,

VRB), ACASO (TERMOMIX), BARBERI, FER-OTERM, PAW, EURONORM, ESBE, IMP, DANFOSS, BESSER, SELTRON, LOVATO, TUXHORN, STRAWA, CIMBERIO

58026 LAZZARI, LANDIS58027 HONEYWELL MS58028 SIEMENS58029 MUT 100058030 W.I.L.B58031 CENTRA (ZRA, DRA)58032 MEIBES, WITA, OVENTROP, HOLTER HORA BR80

SMD/SMV58033 TEHNOPLANT, EXCELSIOR, KRAMER, DE PALA12196 Switch modul S2 EMV Switch module S2 for actuator EMV KOMPAKT

(2 potential free contact at end positions)10024 Rele modul RM 24/48 230VAC EMV110 series 800, 801, 830, 710, MV120/09E10424 Rele modul RM 48ST 24VAC EMV110 series 800, 801, 830, 710, MV120/09E

XVII. ELECTRIC ACTUATORS FOR BALL VALVES

125

78

92,5


XIX. ELECTRIC ACTUATORS FOR BALL VALVES UNI 3P 690

UNI 3P 690 is a compact version of an electric actuator UNI 3P and ball valve series 690 ISO 5211.

Features:• Special constructions of valve’s

ball with special modulating insert – linear flow characteristic.

• Rotation angle is fixed (90°).• Possibility of manual override with

button on actuator cover (gear is disengaged for as long the button is locked).

• Actuator is available with 24VAC or 230VAC, 50Hz power supply.

• Output electric signal (L) at the end position of the actuator (circulation pump control)

Actuator characteristics:• Motor type control: 3-point• Supply voltage: 230VAC/50Hz• Power consumption: 6VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-60335-1): II• Enclosure rating (in accordance with IEC60529): IP44• In accordance with: EMC directive: 2004/108/EEC,• LV Directive: 2006/95/EEC, PAH directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 4x0.5mm2, L=1m• Position indication: handle on actuator cover• Possibility of manual control: yes• Direction of rotation: defined• Built in relay module: noValve characteristics:• Connections: internal thread, ISO5211• Medium: water, nonaggressive fluid, air, glycol < 50%• Medium temperature: +5°C…110°C• Working pressure: max. 16bar• Material:

• Valve body: brass CuZn40Pb2 Ni• Ball: brass CuZn40Pb2 Cr• O-rings: PTFE, FPM, EPDM, HNBR• Valve Insert: PPS


12607 UNI 3P 690 20480-2 DN15 - 1/2" 230VAC, 50Hz 48s/90° 15Nm12608 UNI 3P 690 20480-3 DN20 - 3/4" 230VAC, 50Hz 48s/90° 15Nm12609 UNI 3P 690 20480-4 DN25 - 1" 230VAC, 50Hz 48s/90° 15Nm12610 UNI 3P 690 20480-5 DN32 - 1 1/4" 230VAC, 50Hz 48s/90° 15Nm12611 UNI 3P 690 20480-6 DN40 - 1 1/2" 230VAC, 50Hz 48s/90° 15Nm12612 UNI 3P 690 20480-7 DN50 - 2" 230VAC, 50Hz 48s/90° 15Nm

UNI 3P 690


12619 UNI 3P 690 21470-2 DN15 - 1/2" 230VAC, 50Hz 147s/90° 15Nm12620 UNI 3P 690 21470-3 DN20 - 3/4" 230VAC, 50Hz 147s/90° 15Nm12621 UNI 3P 690 21470-4 DN25 - 1" 230VAC, 50Hz 147s/90° 15Nm12622 UNI 3P 690 21470-5 DN32 - 1 1/4" 230VAC, 50Hz 147s/90° 15Nm12623 UNI 3P 690 21470-6 DN40 - 1 1/2" 230VAC, 50Hz 147s/90° 15Nm12624 UNI 3P 690 21470-7 DN50 - 2" 230VAC, 50Hz 147s/90° 15Nm

DN A B C D E CH Ø Kvs kg15 - 1/2” 130 31,6 63,2 41 9x9 25 30 3,9 0,9820 - 3/4” 134 35 70 44,5 9x9 31 39 7,7 1,1025 - 1” 138 42,5 85 48,5 9x9 40 48 12,7 1,3532- 1 1/4” 146 47,2 94,6 56,5 9x9 49 57 22,7 1,6440 - 1 1/2” 157 54 108 67,3 11x11 55 71 38,6 2,1050 - 2” 164 63 127,5 74,5 11x11 69 87 60,0 2,80


Opening angle - [%]

Flo

w -

Kv/

Kvs

[-]


Patent number:WO/2011/133117


UNI MOD 690

DN A B C D E CH Ø Kvs kg15 - 1/2” 130 31,6 63,2 41 9x9 25 30 3,9 0,9820 - 3/4” 134 35 70 44,5 9x9 31 39 7,7 1,1025 - 1” 138 42,5 85 48,5 9x9 40 48 12,7 1,3532- 1 1/4” 146 47,2 94,6 56,5 9x9 49 57 22,7 1,6440 - 1 1/2” 157 54 108 67,3 11x11 55 71 38,6 2,1050 - 2” 164 63 127,5 74,5 11x11 69 87 60,0 2,80

XIX. ELECTRIC ACTUATORS FOR BALL VALVES UNI MOD 690

UNI MOD 690 is a compact version of a modulating actuator UNI MOD with ball valve series 690 ISO 5211.

Features:• The actuator is controlled with standard

modulating signal of DC 0…10V (factory default) and moves to the position defined by control signal. That allows actuator to be controlled with modulating signal.


• Rotation time 73/90°, optional on request 147s/90°.

• Possibility of manual override with button on actuator cover (gear is disengaged for as long the button is locked).

• Special construction of valve’s ball with special modulating insert – one for all – linear or logarithm flow characteristic.

Actuator characteristics:• Motor type control: modulating (0…10VDC, 4…20mA)• Supply voltage: 24VAC/50Hz• Power consumption: 6VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-60335-1): II• Enclosure rating (in accordance with IEC60529): IP44• In accordance with: EMC directive: 2004/108/EEC,• LV Directive: 2006/95/EEC, PAH directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 4x0.5mm2, L=1m• Position indication: handle on actuator cover• Possibility of manual control: yes• Direction of rotation: definedValve characteristics:• Connections: internal thread, ISO5211• Medium: water, nonaggressive fluid, air, glycol < 50%• Medium temperature: +5°C…110°C• Working pressure: max. 16bar• Material:

• Valve body: brass CuZn40Pb2 Ni• Ball: brass CuZn40Pb2 Cr• O-rings: PTFE, FPM, EPDM, HNBR• Valve Insert: PPS

Code Type Voltage Time Max Torque

12504 UNI MOD 20737 24VAC, 50Hz, Y= 0..10V, 4..20mA 73s/90° 15Nm12509 UNI MOD 21477 24VAC, 50Hz, Y= 0..10V, 4..20mA 147s/90° 15Nm

Adaptersetforvalvesseries690

Code Type58023 UNI-ISO 5211 F03/F04 for valves 690, 35I and 35IM (1/2" - 1 1/4")58019 UNI-ISO 5211 F05 (upgrade to F03/F04) for valves 690, 35I in 35IM (1 1/2" - 2")


12631 UNI MOD 690 20737 - 2 DN15 - 1/2" 24VAC, 50Hz, Y= 0..10V, 4..20mA 73s/90° 15Nm12632 UNI MOD 690 20737 - 3 DN20 - 3/4" 24VAC, 50Hz, Y= 0..10V, 4..20mA 73s/90° 15Nm12633 UNI MOD 690 20737 - 4 DN25 - 1" 24VAC, 50Hz, Y= 0..10V, 4..20mA 73s/90° 15Nm12634 UNI MOD 690 20737 - 5 DN32 - 1 1/4" 24VAC, 50Hz, Y= 0..10V, 4..20mA 73s/90° 15Nm12635 UNI MOD 690 20737 - 6 DN40 - 1 1/2" 24VAC, 50Hz, Y= 0..10V, 4..20mA 73s/90° 15Nm12636 UNI MOD 690 20737 - 7 DN50 - 2" 24VAC, 50Hz, Y= 0..10V, 4..20mA 73s/90° 15Nm


Opening angle - [%]

Flo

w -

Kv/

Kvs

[-]




XIX. ELECTRIC ACTUATORS FOR BALL VALVES UNI MOD X 690



XIX. ELECTRIC ACTUATORS FOR BALL VALVES UNI MOD X


XX. ELECTRIC MOTOR ACTUATED STAINLESS STEEL BALL VALVES

UNI 2P 35I, UNI 3P 35I UNI 2P or 3P series electric motor actuator with installed stainless steel ball valve is designed as closing element for heating systems (solar, remote, house-heating), water supply systems, chemical industry, petrochemical industry…Its usage is not allowed in food preparation systems and pharmaceutical preparations.Features:• Possibility of manual override with button on actuator cover

(gear is disengaged for as long the button is locked).• Output electric signal (L) at the end position of the

actuator (circulation pump control)

UNI 2P 35I

DN Ø A L E Max Kvs kg1/2” 15 167 75 9x9 20 1,273/4” 20 175 80 9x9 41 1,431” 25 185 90 11x11 66 2,051 1/4” 32 195 110 11x11 125 2,531 1/2” 38 212 120 11x11 200 3,782” 50 225 140 11x11 383 5,33


12644 UNI 3P 35I 20480 - 2 DN15 - 1/2" 230VAC, 50Hz 48s/90° 15Nm12645 UNI 3P 35I 20480 - 3 DN20 - 3/4" 230VAC, 50Hz 48s/90° 15Nm12646 UNI 3P 35I 20480 - 4 DN25 - 1" 230VAC, 50Hz 48s/90° 15Nm12650 UNI 3P 35I 21470 - 2 DN15 - 1/2" 230VAC, 50Hz 147s/90° 15Nm12651 UNI 3P 35I 21470 - 3 DN20 - 3/4" 230VAC, 50Hz 147s/90° 15Nm12652 UNI 3P 35I 21470 - 4 DN25 - 1" 230VAC, 50Hz 147s/90° 15Nm

UNI 3P 35I


12641 UNI 2P 35I 10320 - 5 DN32 - 1 1/4" 230VAC, 50Hz 32s / 90° 15Nm


12638 UNI 2P 35I 10320 - 2 DN15 - 1/2" 230VAC, 50Hz 32s / 90° 15Nm12639 UNI 2P 35I 10320 - 3 DN20 - 3/4" 230VAC, 50Hz 32s / 90° 15Nm12640 UNI 2P 35I 10320 - 4 DN25 - 1" 230VAC, 50Hz 32s / 90° 15Nm


12674 UNI 3P 35I/20730 - 2 DN15 - 1/2" 230VAC, 50Hz 73s/90° 15Nm12675 UNI 3P 35I/20730 - 3 DN20 - 3/4" 230VAC, 50Hz 73s/90° 15Nm12676 UNI 3P 35I/20730 - 4 DN25 - 1" 230VAC, 50Hz 73s/90° 15Nm12677 UNI 3P 35I/20730 - 5 DN32 - 1 1/4" 230VAC, 50Hz 73s/90° 15Nm12678 UNI 3P 35I/20730 - 6 DN40 - 1 1/2" 230VAC, 50Hz 73s/90° 15Nm12679 UNI 3P 35I/20730 - 7 DN50 - 2" 230VAC, 50Hz 73s/90° 15Nm

DN Ø A L E Max Kvs kg1/2” 15 167 75 9x9 20 1,273/4” 20 175 80 9x9 41 1,431” 25 185 90 11x11 66 2,051 1/4” 32 195 110 11x11 125 2,531 1/2” 38 212 120 11x11 200 3,782” 50 225 140 11x11 383 5,33


Actuator characteristics:• Supply voltage: 230VAC/50Hz• Power consumption: 6VA• Micro switch rating: 1(1)A,

230VAC• Protection class (in accordance

with EN-60335-1): II• Enclosure rating (in accordance

with IEC60529): IP44• In accordance with: EMC

directive: 2004/108/EEC,• LV Directive: 2006/95/EEC, PAH

directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non


L=1m


• Possibility of manual control: yes

Valve characteristics:• Connections: internal thread• Medium: water, oil, petroleum

products, solvents, vapor, air, aggressive fluids , thermal water


• Working pressure: max. 60bar / 40°C, max. 30bar / 110°C

• Material:• Valve body: AISI 316• Ball: AISI 316• O-rings: PTFE-FKM

• Type of control: 2-point ON/OFF• Rotation direction: undefined CW/CCW• Built-in relay: yes

• Type of control: 3-point • Rotation direction: defined • Built-in relay: no

UNI 3P


UNI 3P 35IM

UNI 3P 35IM is a compact version of an electric actuator UNI 3P with stainless steel ball valve 35IM ISO 5211.

Features:• Special constructions of valve’s ball

with special modulating insert – linear flow characteristic.

• Rotation angle is fixed (90°).• Possibility of manual override with

button on actuator cover (gear is disengaged for as long the button is locked).

• Actuator is available with 24VAC or 230VAC, 50Hz power supply.

• Output electric signal (L) at the end position of the actuator (circulation pump control).


12656 UNI 3P 35IM 20480 - 2 DN15 - 1/2" 230VAC, 50Hz 48s/90° 15Nm12657 UNI 3P 35IM 20480 - 3 DN20 - 3/4" 230VAC, 50Hz 48s/90° 15Nm12658 UNI 3P 35IM 20480 - 4 DN25 - 1" 230VAC, 50Hz 48s/90° 15Nm12662 UNI 3P 35IM 21470 - 2 DN15 - 1/2" 230VAC, 50Hz 147s/90° 15Nm12663 UNI 3P 35IM 21470 - 3 DN20 - 3/4" 230VAC, 50Hz 147s/90° 15Nm12664 UNI 3P 35IM 21470 - 4 DN25 - 1" 230VAC, 50Hz 147s/90° 15Nm


12680 UNI 3P 35IM/20730 - 2 DN15 - 1/2" 230VAC, 50Hz 73s/90° 15Nm12681 UNI 3P 35IM/20730 - 3 DN20 - 3/4" 230VAC, 50Hz 73s/90° 15Nm12682 UNI 3P 35IM/20730 - 4 DN25 - 1" 230VAC, 50Hz 73s/90° 15Nm12683 UNI 3P 35IM/20730 - 5 DN32 - 1 1/4" 230VAC, 50Hz 73s/90° 15Nm12684 UNI 3P 35IM/20730 - 6 DN40 - 1 1/2" 230VAC, 50Hz 73s/90° 15Nm12685 UNI 3P 35IM/20730 - 7 DN50 - 2" 230VAC, 50Hz 73s/90° 15Nm

UNI 3P 35IM

DN Ø A L E Max Kvs kg1/2” 15 167 75 9x9 4 1,273/4” 20 175 80 9x9 7,5 1,431” 25 185 90 11x11 13 2,051 1/4” 32 195 110 11x11 22,5 2,531 1/2” 38 212 120 11x11 33,8 3,782” 50 225 140 11x11 *45 5,33


Kvs=m3/h ∆p=1bar*Kvs=m3/h ∆p=0,5bar

Actuator characteristics:• Motor type control: 3-point• Supply voltage: 230VAC/50Hz• Power consumption: 6VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with EN-60335-1): II• Enclosure rating (in accordance with IEC60529): IP44• In accordance with: EMC directive: 2004/108/EEC,• LV Directive: 2006/95/EEC, PAH directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non condensed)• Storage temperature: -10…+70°C• Connection cord: 4x0.5mm2, L=1m• Position indication: handle on actuator cover• Possibility of manual control: yes• Direction of rotation: defined• Built in relay module: noValve characteristics:• Connections: internal thread• Medium: water, oil, petroleum products, solvents, vapor, air,

aggressive fluids , thermal water• Medium temperature: +5°C…110°C• Working pressure: max. 60bar / 40°C, max. 30bar / 110°C• Material:

• Valve body: AISI 316• Ball: AISI 316• O-rings: PTFE-FKM • Valve Insert: PPS


Opening angle - [%]

Flo

w -

Kv/

Kvs

[-]





12668 UNI MOD 35IM/20737 - 2 DN15 - 1/2" 24VAC, 50Hz, 0..10V, 4..20mA 73s/90° 15Nm12669 UNI MOD 35IM/20737 - 3 DN20 - 3/4" 24VAC, 50Hz, 0..10V, 4..20mA 73s/90° 15Nm12670 UNI MOD 35IM/20737 - 4 DN25 - 1" 24VAC, 50Hz, 0..10V, 4..20mA 73s/90° 15Nm12671 UNI MOD 35IM/20737- 5 DN32 - 1 1/4" 24VAC, 50Hz, 0..10V, 4..20mA 73s/90° 15Nm12672 UNI MOD 35IM/20737 - 6 DN40 - 1 1/2" 24VAC, 50Hz, 0..10V, 4..20mA 73s/90° 15Nm12673 UNI MOD 35IM/20737 - 7 DN50 - 2" 24VAC, 50Hz, 0..10V, 4..20mA 73s/90° 15Nm

UNI MOD 35IM

UNI MOD 35IM

UNI MOD 35IM is a compact version of a modulating electric actuator UNI MOD with stainless steel ball valve 35IM ISO 5211.Features:• The actuator is controlled with

standard modulating signal of DC 0…10V (factory default) and moves to the position defined by control signal. That allows actuator to be controlled with modulating signal.


• Rotation time 73/90°, optional on request 147s/90°.• Possibility of manual override with button on actuator

cover (gear is disengaged for as long the button is locked).

• Special construction of valve’s ball with special modulating insert – one for all – linear or logarithm flow characteristic.

Actuator characteristics:• Motor type control: modulating

(0…10VDC, 4…20mA)• Supply voltage: 24VAC/50Hz• Power consumption: 6VA• Micro switch rating: 1(1)A, 230VAC• Protection class (in accordance with

EN-60335-1): II• Enclosure rating (in accordance with



directive: 2005/69/EEC• Ambient temperature: 0…55°C• Humidity: RH 0%...80% (non

condensed)• Storage temperature: -10…+70°C• Connection cord: 4x0.5mm2, L=1m• Position indication: handle on actuator

cover• Possibility of manual control: yes• Direction of rotation: defined

Code Type Voltage Time MAX Torque

12504 UNI MOD 20737 24VAC, 50Hz, 0..10V, 4..20mA, 15Nm 73s/90° 15Nm12509 UNI MOD 21477 24VAC, 50Hz, 0..10V, 4..20mA, 15Nm 147s/90° 15Nm


DN Ø A L E Kvs kg1/2” 15 167 75 9x9 8,7 1,273/4” 20 175 80 9x9 24,6 1,431” 25 185 90 11x11 30,3 2,051 1/4” 32 195 110 11x11 39,8 2,531 1/2” 38 212 120 11x11 69,3 3,782” 50 225 140 11x11 95,2 5,33

Valve characteristics:• Connections: internal

thread• Medium: water, oil,

petroleum products, solvents, vapor, air, aggressive fluids , thermal water


• Working pressure: max. 60bar / 40°C, max. 30bar / 110°C

• Material:• Valve body: AISI 316• Ball: AISI 316• O-rings: PTFE-FKM • Valve Insert: PPS


Adaptersetforvalvesseries35I,35IM

Code Type58023 UNI-ISO 5211 F03/F04 for valves 690, 35I and 35IM (1/2" - 1 1/4")58019 UNI-ISO 5211 F05 (upgrade to F03/F04) for valves 690, 35I in 35IM (1 1/2" - 2")

Opening angle - [%]

Flo

w -

Kv/

Kvs

[-]




UNI MOD X 35IM




FIRŠT - ROTOTEHNIKA, s.p.Radegunda 54SI-3330 MOZIRJESLOVENIJA

PE VELENJEKoroška c. 56aSI-3320 VELENJESLOVENIJAtel. N.C. +386 (0)3 898 35 00fax. +386 (0)3 898 35 35 [email protected] www.first.si

CENTRAL SERVIS PE VELENJEKoroška c. 56a, 3320 Velenjetel. +386 (0)3 898 35 30fax. +386 (0)3 898 35 31 GSM +386 (0)31 608 393 +386 (0)41 608 393 [email protected]

TECHNICAL INFORMATIONS PE VELENJE tel. +386 (0)3 898 35 15 fax. +386 (0)3 898 35 35 [email protected]

SALESPE VELENJE tel. +386 (0)3 898 35 23 +386 (0)3 898 35 16 fax. +386 (0)3 898 35 35 [email protected] [email protected]

PURCHASESPE VELENJE tel. +386 (0)3 898 35 11 fax. +386 (0)3 898 35 35 [email protected]

ACCOUNTSPE VELENJE tel. +386 (0)3 898 35 36 +386 (0)3 898 35 21 fax. +386 (0)3 898 35 35 [email protected]

PRODUCTION PE VELENJEtel.: +386 (0)3 898 35 33fax: +386 (0)3 898 35 35 [email protected]

CONTACT

All examples listed in the instructions are merely indicative. The manufacturer accepts no responsibility for incorrect hydraulic connection of machine part of installation. Machine and electric installations should comply with all safety regulations defined by law and the rules.We reserve the right to modify the instructions and the technical data of the product without prior notice.

CONTACT


Certificates


FIRŠT - ROTOTEHNIKA, s.p.Radegunda 54, SI-3330 MOZIRJE, SLOVENIJA

PE VELENJE - SALES, PRODUCTION, SERVICEKoroška c. 56a, SI-3320 VELENJE, SLOVENIJAtel. +386 3 898 35 00fax. +386 3 898 35 35 [email protected] www.first.si

IDCS5-2312-katalog2012-v18-en

wise decision

first general catalogue

Documents

quality of firt products

different products

following groups of

control valves

stateoftheart equipment

european institutions

european union

control panels