fitting instructions for a mazda 2 (de ... - … · fitting instructions for a mazda 2 (de) ryco...

1
FITTING INSTRUCTIONS FOR A MAZDA 2 (DE) RYCO CABIN AIR FILTER RCA246P INSTRUCTION SHEET IS246P GUD Automotive Pty Ltd 29 Taras Ave Altona North Victoria 3025 Australia www.rycofilters.com.au GUD (NZ) Holdings Limited 626A Rosebank Road Avondale Auckland, New Zealand www.ryco.co.nz GUD Automotive - A Division of 1 2 The cabin air filter location is on the drivers side footwell at the far end of the centre console. To access the filter undo the 4 screws shown in the picture with a Phillips screw driver and remove the housing lid. Once the cabin air filter housing lid is out of the way, the filter will be accesible. Pull the first filter out and then reach for the second one. Pay attention on how the filters sit in and replicate this with the new ones, making sure they are placed in the right air flow direction and lastly refit the housing lid.

Upload: vantuong

Post on 29-Sep-2018

219 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: FITTING INSTRUCTIONS FOR A MAZDA 2 (DE ... - … · FITTING INSTRUCTIONS FOR A MAZDA 2 (DE) RYCO CABIN AIR FILTER RCA246P INSTRUCTION SHEET IS246P GUD Automotive Pty …

FITTING INSTRUCTIONS FOR A MAZDA 2 (DE)RYCO CABIN AIR FILTER RCA246P

INSTRUCTION SHEET IS246P

GUD Automotive Pty Ltd29 Taras Ave Altona NorthVictoria 3025 Australiawww.ryco�lters.com.au

GUD (NZ) Holdings Limited626A Rosebank Road AvondaleAuckland, New Zealandwww.ryco.co.nz

GUD Automotive - A Division of

1

2

The cabin air filter location is on the driversside footwell at the far end of the centre console.To access the filter undo the 4 screws shown inthe picture with a Phillips screw driver andremove the housing lid.

Once the cabin air filter housing lid is out of theway, the filter will be accesible. Pull the first filterout and then reach for the second one.Pay attention on how the filters sit in and replicatethis with the new ones, making sure they areplaced in the right air flow direction and lastlyrefit the housing lid.