Canon is the leading and popular manufacturing company that provides home and business

consumers with a wide variety of printers. Canon Printers, however, are renowned for their

simple troubleshooting worldwide. But, according to the latest research conducted by our Canon

technical support experts, when operating, multiple users experience the error. The B200 error

code is one of the most common errors experienced by Canon printer users. Well, for different

reasons, this form of error code may occur, including print head problems or when the print head

voltage or temperature or print head may be faulty, cartridge problem, power link problem, logic

board, and so on, if not usual. So, if, when you are operating, you get exactly the same Canon

Printer Error Code B200. You don't need to think about it then. Therefore, some basic methods

for repairing Canon Printer Error Code B200 will lead you here to the site. You will then need to

follow the steps below to quickly solve the problem.

Reasonable Causes for Canon B200 Error Code.

You could get a Canon mg5220 b200 error all of a sudden when working with Canon printers. In

most of the newer Canon printer models, this error is very popular. In addition to the MG5220

printer, when using MP6320, MP870, etc., users may also face an error. Such a mistake occurs

due to a defective printer's ink head. Often, the printer's print head is not matched correctly with

the front frame. In addition, due to the incorrect positioning of cartridges, an error can also occur.

Resolve Canon Printer Error Code B200

Method 1:- Switch OFF the Printer Power For Some Time First, you can try to verify that the printer's power cable is switched off or disconnected from the

back of your device to automatically erase the Canon B200 printer error.

To do this assignment, follow these steps:-

Switch off the printer.

For a minimum of 8-10 minutes, unplug the power from the printer.

Remove any document from the device when it is unplugged.

Then double-check the unit or paper paths for any obstructions detected.

Plug the power back in and turn the machine on if no obstructions are identified.

Method 2:- Check Internet Connection and Administrator Entrance on A Computer

You will need to check that your machine has an internet connexion and that you have

administrator access.

Update your printer drivers as well as the program for the Canon IJ Printer Utility.

On your Windows desktop, click 'Start' and then click 'Devices and Printers.'

Right-click the Canon button and then click Assets.

Choose the tab "Maintenance" and then press "Deep Cleaning."

When the deep cleaning is finished, launch a Nozzle Search from the "Maintenance" tab.

If everything is ok, but still this error persists, then you should proceed to the next step.

Method 3:- Verify Your Canon Cartridges

You should try to check your cartridges connectors and functioning because an empty cartridge

can lead to Canon Printer Error Code B200.

Step 1:- Terminate Cartridges Connector

Verify all the cartridge connectors (copper contacts on the front of the cartridge) and printer

connectors, which are located also in the front of the head. They must be clean in its entirety

parts, which means maybe they do not have stains of ink or down that can prevent the proper

operation.

Step 2:- Verify your Cartridges Slot

You need to ensure that all the cartridges are in the correct slot. Follow the colored indication to

insert the cartridges in the appropriate way.

Step 3:- Verify your Cartridges Compatibility

Now you have confirmed that your cartridges are compatible with your Canon printer. Verify

check your cartridge’s compatibility.

Go through with the user manual or confirm from the dealer about the same.

Also, you must don’t leave the printer without the ink cartridges for too much time as the ink

may dry on the print head causing printing issues.

Step 4- Substitute the Cartridge

After performing the entire above step, if you find the cartridge has a fault. Then you need to do

to replace the cartridge.

Method 4:- Blow the Print Head

You should need to clean the Print Head Deeply, as cleaning the print head deeply consumes

more ink than the standard cleaning of the print head, so clean the print head deeply only when

necessary.

Step 1:- Set On the Printer Power

Make sure that the power is turned on.

Step 2:- Cleansing the Print Head

Hold down the “Stop” button until the “Alarm” lamp flashes orange three times, then release it

immediately. Then the printer starts cleaning the print head deeply.

The cleaning will be complete when the ON lamp lights green after flashing.

Make sure that you don’t need to perform any other operations until the printer completes

the deep cleaning of the print head.

The process will take not much time, as it takes about 1 to 2 minutes.

Step 3:- Review the Print Head Condition

You would then need to check the condition of the printing head. Then print a pattern for the

nozzle search.

Then reinstall the components that you removed and close the door of the compartment.

Then, reconnect and restart the printer with the power cord and other cables.

To confirm that the printer is working properly, print a test sheet.

If the issue is not fixed, then after 24 hours, you can try to turn off the power and

thoroughly clean the print head again.

NOTE - If the error is not Fixed you can Check Mentioned Blog.