fixing solutions

CI/SfB Xt6

March 2019

Fixing Solutionsfor the Construction Industry

Ancon Austria Vienna Ancon Germany NurembergAncon Switzerland Lyss

Ancon UAE Dubai

For more information on Ancon’s products and services please email [email protected], call +44 (0) 114 275 5224 or visit:

www.ancon.co.uk

Ancon’s origins date back to 1882 when steel fabrication company ‘George Clark’ was founded in Sheffield, England. The Ancon name came from ‘Ancon Stainless Steel Fixings’ which was founded in 1971 and merged with George Clark in 1993.

The company’s 108,000ft2 head office and main manufacturing site is still located in the city of Sheffield, world renowned as the traditional centre of the stainless steel industry. Today, Ancon has around 700 employees at three UK manufacturing sites and ten overseas operations located in New Zealand, Australia, United Arab Emirates, Germany, Switzerland and Austria. We are owned by CRH plc, a global building materials group.

Ancon’s UK sites are capable of producing a high volume of standard products on very short lead times, and bespoke products specifically engineered to meet individual project requirements.

On a daily basis, Ancon’s technical staff liaise with project teams throughout the world, advising on the most cost-effective and practical construction solutions.

The company’s impressive project portfolio includes:

• The Shard, UK

• Ferrari World, Abu Dhabi

• Brisbane Airport Link Road, Australia

• Thessaloniki Metro, Greece

• Stade de Suisse, Switzerland

About Us

Ancon Head Office, Sheffield, South Yorkshire, UK

Ancon’s management systems comply with ISO 9001, ISO 14001 and OHSAS 18001. Products are CE marked where relevant.

Ancon designs and manufactures high integrity steel products for the construction industry, supplying customers worldwide in a variety of sectors from small-scale residential developments to major infrastructure projects. The company is a three-time winner of the Queen’s Award for Enterprise.

www.anconbp.de

www.ancon.ch

www.ancon.at

www.ancon.ae

www.ancon.com.au

www.ancon.co.nz

www.ancon.atwww.ancon.at

www.ancon.aewww.ancon.ae

www.ancon.com.auwww.ancon.com.au

www.ancon.co.nzwww.ancon.co.nz

www.ancon.chwww.ancon.ch

www.anconbp.dewww.anconbp.de

Ancon UKSheffield (Head Office) and Deeside

2

Ancon Australia Sydney, Brisbane, Melbourne and Perth

Ancon New Zealand Auckland, Christchurch

Products for Brick, Block & Stone pages

Support Systems

Lintels

Windposts & Parapet Posts

Masonry Reinforcement

Channel & Bolt Fixings

Wall Ties & Restraint Fixings

Additional Stainless Steel Solutions page

Special Fabrications

Flooring

Formed Sections

Products for Structural Concrete pages

Shear Load Connectors

Punching Shear Reinforcement

Reinforcing Bar Couplers

Reinforcement Continuity Systems

Thermal Breaks

Stainless Steel Reinforcement

Corner Guards

Architectural Metalwork page

Tension Systems

Compression Systems 7

8-10

11

Deeside Manufacturing Facility, North Wales, UK

4-6

Wire/Coil MachiningLaser Cutting Plate

Corporate Social ResponsibilityAncon is committed to ethically and responsibly managing all aspects of its operations. Read exactly what this means in practice in the Ancon CSR report.

3

Products for Brick, Block & Stone

Lintel

AnconOptima Masonry SupportPatent No. EP 1211364

Horizontal Support

Masonry Support Systems Both AnconOptima and the Ancon MDC system provide a continuous angle in the external masonry leaf. AnconOptima is a standard system, available from stock. MDC systems are designed to suit specific applications.

Stonework supports include corbel angles and adjustable individual brackets.

4

Channel & Bolt Fixings A wide range of channels and bolts are available to fix stainless steel masonry supports and restraints to any type of structural frame.

Lintels The Ancon lintel range suits the majority of wall constructions and load conditions. Special lintels can be manufactured to suit architectural features and non-standard applications.

Channel & Bolt Fixings

Saw Swee Hock Student Centre, London School of Economics

Windposts

furt

herin

form

ati

on

&se

rvic

es

Tel: +44 (0) 114 275 5224www.ancon.co.uk

• Technical Advice

• CPD Seminars

• Value-Engineered Solutions

• NBS Plus Specification Details

• CAD Profiles / BIM Objects

• Layout Drawings

• Project Management

• Installation Guidance

• Technical Literature

• Online Resource 24-7

• CE Marking

furt

her

CI/SfB Xt6

March 2018

BS EN 845-3 BS EN 1090-1

Windposts and Masonry Reinforcementfor the Construction Industry

Masonry Reinforcement Ancon AMR masonry reinforcement locates in the bed joint. The longitudinal wires are flattened to less than 3mm. Standard configurations suit a wide range of structural load conditions and wall widths.

Windposts & Parapet Posts Ancon Windposts span vertically between floors. Profiles include channel and angle sections. They are designed to suit specific applications and are supplied complete with all end connections and wall ties.


Channel and Bolt Fixings for the Construction Industry

CI/SfB (21.9) Xt6August 2007

Channel and Bolt Fixings

1. Contact DetailsContact Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Office Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Project Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Site Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Type of Windpost:(tick one box only)

Email to [email protected] or fax to +44 (0) 114 276 8543

For more information please contact Ancon on +44 (0) 114 275 5224

Design Sheet - Windposts to BS EN 1993 (Eurocode 3)

. . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Please complete questions 1-10 below. This will enable us to produce drawings for approval prior to manufacture.

One windpost specification per sheet.Note: Where loads are provided, a partial safety factor ( Q) of 1.5 will be used to check serviceability.

9. Wall Construction

10. Drawings Attached?Please state brick, block, cavity and insulation widths (mm):

Brick (A)

Cavity (B)

Block (C)

Insulation (D)

Yes

No

(Please attach drawings showing section through building if available)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

Concrete Edge

Please specify section size . . . . . . . . . . . .

6. Top Connection (tick one box only) Please indicate required top connection from drawings below and complete all applicable dimensions (see ?).

7. Base Connection (tick one box only)

Steel Beam

a

a

Concrete Edge

x

bFoundation

x

b

x

b

a

?

?

?

AB

C

D

Timber wall plate

8. Slot DimensionPlease state dimension from base to first tie position to match coursing - b to x (mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hollow Core Concrete Edge

Note: Windposts will be detailed and supplied as orientated above unless

otherwise stated.3. State either Section Size

eg. 140 x 70 x 4 mm orDesign Load/Post (kN) ULS e.g. 7kN

4. Number Required Number of windpostsrequired to this specification5. LengthStructural Opening a to b (mm)

Purpose of Design Sheet (tick box as appropriate) New Quote Amendment to Existing Quote New Order

Existing Order

WP1WP2

WP3WP4

Strengthening Masonry Panels

Channel and Channel and Bolt Fixings

1. Contact DetailsContact Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Office Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . .

Project Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Site Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Design Sheet - Windposts to BSPlease complete questions 1-10 below. This will enable us to produce drawings for approval prior to manufacture.

One windpost specification per sheet.Note: Where loads are provided, a partial safety factor (

(tick one box only)Please indicate required top connection from drawings below and complete all applicable dimensions (see ?).

Purpose of Design Sheet (tick box as appropriate)BS EN 845-1

Masonry Support Systems & Lintelsfor the Construction Industry

CI/SfB Xt6July 2013

7. Base Connection (tick one box only)

Email to [email protected] or fax to +44 (0) 114 276 8543

For more information please contact Ancon on +44 (0) 114 275 5224

9. Wall Construction

Please state brick, block, cavity and insulation widths (mm):Brick (A)

Cavity (B)

Block (C)

Insulation (D)

BBCC

DD

8. Slot DimensionPlease state dimension from base to first tie position to match coursing - b to x (mm)

6. Top Connection (tick one box only)Please indicate required top connection from drawings below and complete all applicable dimensions (see ?).

Purpose of Design Sheet

New Quote

New Order

BS EN 845

Masonry Support Systems & Lintelsfor the Construction Industry

Contact DetailsContact name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Project name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Project address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Please attach any additional information which may affect the design, eg. does parapet return to façade of building?

Design Conditions 1. Cavity (mm)

2a. Characteristic Load (kN/m) SLSor 2b. Height of masonry (mm)3. Frame (Fixing) type (please tick one)

Steelwork (UB/UC)

Steelwork (RHS/SHS)Concrete (cast in channel)*

Concrete (post fixed)*

*If concrete frame, please provide:Concrete gradeCracked / Uncracked NB. if unknown, we will assume C30/37 uncracked for calculation purposes

4. Masonry density (kg/m3)5. Masonry width (mm)

6. Slab/beam depth (mm)7. Underside of support angle to underside of structure, -ve value = projection (mm)

8. Length of support system (m)

Email to [email protected] Building Products, President Way, President Park, Sheffield, S4 7UR, UK.

Tel: +44 (0) 114 238 1239, Web: www.ancon.co.uk

Design Sheet - Masonry Support to BS EN 1993 (EC3)

Please provide: contact details; project details; design conditions; sketch of support system

Page

Please provide section through at support system location

100mm 102mm

14 kN/m load SLS

225mm Concrete

75mm Projection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Example Sketch

5


furt

herin

form

ati

on

&se

rvic

es



• Product Approvals


• Distributor Sales Support




• Interactive Product Selector

• CE Marking

TYPE A

Stone Restraints

CI/SfB (21.9) Xt6March 2017 (Version 4)

BS EN 845-1

Wall Ties & Restraint Fixingsfor the Construction IndustryThermal

Orchestrate improvements to wall U-values

with Ancon Low Thermal Conductivity Wall TiesAncon LtdPresident Way, President ParkSheffield S4 7UR,United Kingdom

Information for U-value CalculationsFor the accurate calculation of a wall’s U-value, it is important to use the correct information for the wall ties, rather than

allowing a program to apply a default value as this will over-estimate the effect of an Ancon Wall Tie. BS EN ISO 6946

permits the corrections due to wall ties (ΔUf) and air gaps between insulation boards etc to be omitted if the corrections

amount to less than 3% of the uncorrected U-value of the wall.

ΔUf ΔUf

Tie Tie

Tie Length Cavity Chi Value if 2.5 ties/m2 if 4.4 ties/m2

Reference Type

(mm) (mm) (W/K) (W/m2K) (W/m2K)

TEPLO-L-5-165 Type 3 and Type 6 165 100 0.000335

0.00084 0.00147


0.00065 0.00114


0.00054 0.00095


0.00044 0.00077


0.00038 0.00066

TEPLO-L-7-165 Type 2

165 100 0.000515

0.00129 N/A, not Type 6

TEPLO-L-7-190 Type 2 190

125 0.000405 0.00101

N/A, not Type 6

TEPLO-L-7-215 Type 2

215 150 0.000340

0.00085 N/A, not Type 6


175 0.000280 0.00070 N/A, not Type 6


200 0.000245 0.00061

N/A, not Type 6


0.00053 0.00092


0.00048 0.00084


0.00041 0.00073


0.00038 0.00066

Tie Tie

Tie Length Cavity Range Cross-Sectional Area Thermal Conductivity

Reference Type

(mm) (mm)

(mm2) (W/mK)

HRT4-200 4

200 50-75

3.5 17.0

HRT4-225 4

225 76-100

4.2 17.0

HRT4-250 4

250 101-125

6.2 17.0

HRT4-275 4

275 126-150

6.2 17.0

RT2-200 2

200 50-75

7.5 17.0

RT2-225 2

225 76-100

7.5 17.0

RT2-250 2

250 101-125

8.6 17.0

RT2-275 2

275 126-150

10.2 17.0

ST1-200 1

200 50-75

19.5 17.0

ST1-225 1

225 76-100

19.5 17.0

ST1-250 1

250 101-125

19.5 17.0

ST1-275 1

275 126-150

23.4 17.0

ST1-300 1

300 151-175

23.4 17.0

ST1-325 1

325 176-200

23.4 17.0

ST1-350 1

350 201-225

23.4 17.0

Ancon Teplo-L-Tie Basalt-Fibre/Stainless Steel Frame Cramp

This composite wall tie has been thermally modelled by a third party expert, allowing Ancon to provide accurate Chi values

for each product length. To understand the effect of these wall ties in a square metre, the Chi value (W/K) is multiplied by

the number of wall ties. The exceptional thermal efficiency of the Teplo range is such that it is unlikely ever to be taken into

account in U-value calculations as a thermal bridge.

Wall Tie TypesWall Ties are classified by the Types given in PD6697 (Types 1 to 4) and, specifically for timber frame construction, BS5268-

6.1:1996 (Types 5 to 7). These documents should be consulted for complete information on wall tie use, such as altitude and

wind speed restrictions, however, generally speaking, Type 1 ties are suitable for buildings of any height*, Type 2 and Type 3 ties

are suitable for buildings up to 15 metres, Type 4 ties are suitable for houses up to 10 metres and Type 6 ties are suitable

for timber frame developments up to 15 metres. *The original TeploTie is suitable for a maximum building height of 18 metres.

Wall Tie SpacingWall Tie Types 1 to 4 should be installed at a standard spacing of 2.5 per square metre (900mm horizontal x 450mm vertical

centres). Decreasing the centres can increase the performance e.g. Type 3 to Type 2. Contact Ancon for details. Type 6

timber-to-masonry wall ties should be installed at a minimum of 4.4 per square metre.

Ancon Teplo Basalt Fibre Wall TiesTeplo-BF, Teplo-BFR and TeploTie cavity wall ties have a thermal conductivity of less than 1.0W/mK and so are

excluded from U-value calculations to EN ISO 6946, irrespective of tie diameter.

Ancon Stainless Steel Wall TiesThe thermal conductivity and cross-sectional areas of Ancon’s stainless steel wall ties are shown below for use in U-value

calculation programs.

March 2018

LowConductor

Tel: +44 (0) 114 275 5224Email: [email protected]: www.ancon.co.uk

BS EN 845-1

Orchestrate improvements to wall U-values

with Ancon Low Thermal Conductivity Wall Ties

LowConductor

MAS

ONRY

TO

STEE

L W

ALL

TIES

MAS

ONRY

TO

TIM

BER

WAL

L TI

ESW

ALL

STAR

TER

SY

STEM

S

ROOF

ING

PROD

UCTS

OTHE

R M

ASON

RY

PROD

UCTS

MAS

ONRY

TO

MAS

ONRY

WAL

L TI

ES

Wall Ties & Restraint Fixings

Issue No. 13

Featuring Marking to the Construction

Products Regulation

Manufactured by

Masonry Passivhaus Development, West Yorkshire

© G

reen

Bui

ldin

g S

tore

Wall Ties & Other Restraint Fixings Ancon manufactures wall ties in a variety of lengths and types for restraining brick, block and stone. These restraints can be designed to fix to concrete and structural steel as well as any type of masonry.

The standard wall tie range includes solutions for traditional brick-to-block, thin-joint blockwork, cellular clay blockwork, timber frame and light steel studding. Many products, including those from the Staifix range, can be delivered in 24 hours and are held in stock by distributors.

The range also includes Teplo basalt fibre wall ties, warm roof batten fixings and products for remedial work including a crack stitching kit.

Masonry Restraints

6

furt

herin

form

ati

on

&se

rvic

es


• CPD Seminars

• Design Services

• Product Approval







• Interactive Product Selector

• CE Marking


Electro-polished Tension System

Satin-polished Tension System

Hand-polished Tension System

Hand-polished Compression System

Architectural Metalwork

BS EN 845-1

Tension and Compression Systemsfor the Construction Industry

CI/SfB Xt6

July 2016 (Version 2)

Tension & Compression Systems In addition to providing a high load capacity, these stylish Ancon systems meet the demanding aesthetic requirements of today’s architectural applications. Both systems are available in carbon and stainless steel in a variety of sizes and finishes including hand polished.

Components combine to create fixing solutions for staircases, canopies, timbers and large areas of glazing.

Tension Systems comprise high strength bar, fork connectors, locking nuts, couplers and anchor discs.

Compression Systems comprise high strength tubes, fork connectors and locking nuts.©

Dar

cy S

chac

k JA

M P

hoto

grap

hics

Ltd

7


• CPD Seminars

• Design Services



• CAD Profiles


• Design Software


DSD Shear Load Connector

Punching Shear Reinforcement Ancon Shearfix consists of double-headed studs welded to flat rails. It is used within a slab to provide additional reinforcement around columns, protecting the slab from the effects of punching shear.

Free EC2-compliant design software is available.

Products for Structural Concrete

Accommodating Shear


Lockable DowelEuropean Patent No. 2191078


8

Shear Load Connectors Installed at expansion and contraction joints, Ancon shear load connectors are more effective at both transferring load and accommodating movement than plain dowel bars. Each connector is a two-part assembly, comprising a sleeve and a dowel component. Products are available for joints in ground bearing and suspended slabs. Free design software is available.

The range includes a unique ‘Lockable Dowel’ designed for use at temporary movement joints in post-tensioned concrete frames.

BS EN 845-1

Lockable Dowelsfor Temporary Movement Jointsin Post-Tensioned Concrete

A cleaner, safer,faster alternative to Pour Strip s

DSD/ESD Shear Load Connectors for the Construction Industry

CI/SfB (29) Xt6April 2014

Tel: +44 (0) 114 275 5224

BS EN 845-1



furt

herin

form

ati

on

&se

rvic

es

Reinforcement Continuity Systems Ancon Eazistrip consists of pre-bent bars housed within a galvanised steel casing. Once installed, the protective cover is removed and the bars are straightened.

Ancon Starter Bars are supplied fixed to an Ancon coupler. Once cast in concrete, the coupler’s end cap is removed and a tapered thread continuation bar is installed with a calibrated torque wrench to complete the connection.

The latest addition to the range is the Ancon KSN Threaded Anchor, which minimises congestion in a wall. Connection to the anchor is with Bartec Plus parallel threaded bar.

Reinforcing Bar Couplers Mechanical couplers can be used to replace long bars and lapped joints, simplify design details, reduce rebar congestion and accelerate the speed of construction. The Ancon range includes parallel threaded, tapered threaded, mechanically bolted and grouted couplers. Couplers for stainless steel and cryogenic-grade rebars are also available.

Tapered Thread Reinforcing Bar Couplers

Continuity of Reinforcement


• CPD Seminars


• Distributor Sales Support

• Product Approvals





Starter Bar System for the Construction Industry

CI/SfB (29) Xt6October 2007

Starter Bar Systemfor the Construction Industry

Reinforcement Continuity Systemsfor the Construction Industry

CI/SfB (29) Xt6October 2017

Compatible with designs to BS EN 1992-1-1:2004 (EC2)

002

5017

TECHNICALAPPROVAL

Starter Bar SystemStarter Bar Systemfor the Construction IndustryCompatible with designs to BS EN 1992-1-1:2004 (EC2)

CI/SfB (29) Et6 March 2017

Enhanced Performance Loads in Slab-to-Wall Moment Connections

DesignProgramavailable

TECHNICAL APPROVAL5061

KSN Anchors ReinforcementContinuity Systemfor the Construction Industry

Tel: +44 (0) 114 275 5224

Reinforcement Continuity Systemsfor the Construction Industry

5061

KSN Anchors ReinforcementContinuity System

Reinforcing Bar Couplers for the Construction Industry

CI/SfB (29) Xt6July 2017

UK & Ireland Edition

Compliant withBS 8597: 2015

furt

herin

form

ati

on

&se

rvic

es

Reinforcement Continuity System

MBT ET Bolted Coupler

KSN Threaded Anchor and Bartec Plus Continuation Bar

Tapered-Thread Starter Bar System

9

HAPAS

Stainless Steel Bar

Thermal Breaks These systems are used to minimise cold bridging at balcony locations where structural connections pass through the insulated building envelope. They provide a thermal break by inserting a material with a low thermal conductivity between elements with a higher conductivity and most also provide local insulation at the joint. As critical structural components, these Ancon insulated connectors also transfer moment, shear, tension and compression forces. Standard solutions are available for concrete-to-concrete, steel-to-concrete and steel-to-steel interfaces. Galvanised systems are also available.

Corner Guards Ancon Corner Guards protect exposed edges of columns and walls in areas of high traffic, such as car parks and warehouses. Where aesthetics are important, stainless steel corner guards can be supplied with a satin-polished surface finish.

Reinforcing Bar Ancon supplies stainless steel plain and ribbed bar direct from stock. Bars can be supplied cut to length, bent and threaded to suit any application.

Engineered Bar Solutions

Thermal Break at Concrete-to-Concrete Balcony Locations

Stainless Steel Reinforcement

Stainless Steel Reinforcement for the Construction Industry

CI/SfB (29) Xt6September 2012


• CPD Seminars

• Design Services


• CAD Drawings






Corner GuardsCorner Guards offer protection to exposed edges of columns and walls in areas of high traffic such as car parks, warehouses, hospitals etc.Ancon manufactures corner guards in

a standard length of 1250mm in either stainless steel, galvanised steel or untreated mild steel.Stainless steel provides the greatest corrosion resistance and, where aesthetics are important,can be supplied with a satin-polished

surface finish.Corner guards can be either cast-in to concrete or post-fixed to almost any material.

BS EN 1090-1

Acciaio d’Armatura Inossidabile for the Construction Industry

CI/SfB (29) Xt6May 2016

BS EN 1090-1

Thermally Insulated Balcony Connectors for the Construction Industry

CI/SfB (29) Xt6May 2016

furt

herin

form

ati

on

&se

rvic

es

10


• Design Services




• Project Portfolio


• CE Marking


Special Fabrications Ancon has a wealth of experience of working with different types and grades of stainless steel, and produces special fabrications to suit individual customer requirements. Both one-off and volume orders have been supplied to various industries such as Building, Infrastructure, Water Treatment, Nuclear and Mining. Ancon has a particularly impressive project portfolio in the Tunnelling Industry.

The company is certified to undertake welded fabrication work to Execution Class 2 of BS EN 1090-1, the European Standard governing structural steelwork. This Execution Class covers the vast majority of building applications and is the default class when unspecified.

Stainless Steel Flooring

Tunnel Ceiling Suspension Systems

Road Deck Endplates

Special Stainless Steel Solutions

Special Fabrications

Stainless Steel Sections & Flooring for the Engineering Industry

CI/SfB Xt6June 2012

Special Fabrications in Stainless Steel

CI/SfB Xt6

March 2016

Engineered Fixing Solutions,Fabricated in Stainless Steels

TunnelVision

T U N N E L L I N G

furt

herin

form

ati

on

&se

rvic

es

11

The construction applications and details provided in this literature are indicative only. In every case, project working details should be entrusted to appropriately qualified and experienced persons.

Whilst every care has been exercised in the preparation of this document to ensure that any advice, recommendations or information is accurate, no liability or responsibility of any kind is accepted in respect of Ancon.

With a policy of continuous product development Ancon reserves the right to modify product design and specification without due notice.

© Ancon

These products are available from:

Masonry Support Systems

Lintels


Windposts and Parapet Posts

Wall Ties and Restraint Fixings

Channel and Bolt Fixings

Tension and Compression Systems

Insulated Balcony Connectors

Shear Load Connectors


Reinforcing Bar Couplers

Reinforcement Continuity Systems

Stainless Steel Fabrications

Flooring and Formed Sections

Refractory Fixings

Ancon Building Products 98 Kurrajong Avenue Mount Druitt Sydney NSW 2770 Australia Tel: +61 (0) 2 8808 3100 Fax: +61 (0) 2 9675 3390 Email: [email protected] Visit: www.ancon.com.au

Ancon Building Products 2/19 Nuttall DriveHillsboroughChristchurch 8022New ZealandTel: +64 (0) 3 376 5205Fax: +64 (0) 3 376 5206Email: [email protected] Visit: www.ancon.co.nz

Ancon (Schweiz) AG Grenzstrasse 243250 LyssSwitzerland Tel: +41 (0) 31 750 3030 Fax: +41 (0) 31 750 3033 Email: [email protected] Visit: www.ancon.ch

Ancon Building Products GesmbH Puchgasse 1A-1220 ViennaAustria Tel: +43 (0) 1 259 58 62-0 Fax: +43 (0) 1 259 58 62-40 Email: [email protected] Visit: www.ancon.at

Ancon GmbH Bartholomäusstrasse 26 90489 Nuremberg Germany Tel: +49 (0) 911 955 1234 0 Fax: +49 (0) 911 955 1234 9 Email: [email protected] Visit: www.anconbp.de

Ancon Ltd President Way, President Park Sheffield S4 7UR United Kingdom Tel: +44 (0) 114 275 5224 Fax: +44 (0) 114 276 8543 Email: [email protected] Visit: www.ancon.co.uk Follow on Twitter: @AnconUK

Ancon (Middle East) FZE PO Box 17225 Jebel Ali Dubai United Arab Emirates Tel: +971 (0) 4 883 4346 Fax: +971 (0) 4 883 4347 Email: [email protected] Visit: www.ancon.ae

fixing solutions

Documents