flat elastic band adapter clip for prusa face shield headband · this clip allows a removable and...
TRANSCRIPT
4.85 hrs
3 pcs
f
0.38 mm
k
0.40 mm
h
8
106.00 g
d
PrusaMK3/S
Summary
Our builder group was unable to source buttonhole elastic for the PrusaFace Shield. We had to fall back to bulk standard flat elastic material.
This clip allows a removable and infinitely adjustable elastic band and clipto be fit to any RC3 headband.
Design accommodates elastic up to 25mm (~1 inch) wide.
Healthcare > Accessibility
faceshield elastic covid19 clip accessory
100% Infill
Included build plates for 8 clips (4 visors) or a max-capacity-build-plate of35 per build plate.
Tuned for a .4mm nozzle at .38 layer height and MVS of 13.
CAR
Flat Elastic BandAdapter Clip forPrusa Face ShieldHeadband
VIEW IN BROWSER
updated 28. 4. 2020 | published 28. 4. 2020
Print Files (.gcode) DOWNLOAD ALL FILES
336.6 KB
0.11 hrs f 0.38 mm k 0.40 mm h PET 2.40 g d PrusaMK3/S
updated 28. 4. 2020
2.5 MB
0.88 hrs f 0.38 mm k 0.40 mm h PET 19.30 g d PrusaMK3/S
updated 28. 4. 2020
11.0 MB
3.86 hrs f 0.38 mm k 0.40 mm h PET 84.40 g d PrusaMK3/S
updated 28. 4. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
125.7 KBupdated 28. 4. 2020
316.9 KBupdated 28. 4. 2020
This remix is based on
Prusa Face Shield - US version
by Prusa Research
prusa-visor-clip-v3_038mm_petg_mk3s_7m.gcode
8x-prusa-visor-clip-v3_038mm_petg_mk3s_53m.gcode
35x-prusa-visor-clip-v3_038mm_petg_mk3s_3h51m.gcode
prusa-visor-clip-v3.f3d
prusa-visor-clip-v3.3mf
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition