flexible systems - news.voltilink.co.uk · the fs2 is a modular single colour and full colour...

8
FLEXIBLE SYSTEMS FS3 flexible LED strip

Upload: others

Post on 07-Jul-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: FLEXIBLE SYSTEMS - news.voltilink.co.uk · The FS2 is a modular single colour and full colour change LED system which enables OEMs to easily construct bespoke schemes by selecting

FLE

XIB

LE S

YS

TE

MS

FS3 flexible LED strip

Page 2: FLEXIBLE SYSTEMS - news.voltilink.co.uk · The FS2 is a modular single colour and full colour change LED system which enables OEMs to easily construct bespoke schemes by selecting

FS1pg 24

FLEXIBLE SYSTEMS

FLE

XIB

LE S

YS

TE

MS

23

FS2pg 25

FS3pg 26

FS4pg 28

FS5pg 29

Page 3: FLEXIBLE SYSTEMS - news.voltilink.co.uk · The FS2 is a modular single colour and full colour change LED system which enables OEMs to easily construct bespoke schemes by selecting

Materials

• Thermagon 1kA thermally conductive MCPCB• Heat sink mounting plate: Aluminium

Installation

• Suitable for interior applications• Surface mount with Plug & Socket connection• 100mm, 200mm or 300mm leads as std

(Other lengths by special request)• Refer to P58-59 for suitable driver module

Dimensions (mm)

Lamp Colours

Lamp Options

• 1 x 1W Luxeon K2 LED

Beam Angles

Catalogue Numbers

The FS1 is a modular single colour LED

system which enables OEMs to easily

construct bespoke schemes by selecting

from the listed components.

This flexible system is ideal in applications

where curves and corners need to be

negotiated for continuous lighting.

The components are PCB’s which include

the K2 LED in the chosen colour and optic,

with wiring connectors and VHB tape on

the rear, plus a range of link leads and heat

sink plates.

FS1 COMPONENTS IP20FL

EX

IBLE

SY

ST

EM

S

24

5° 15° 25° 5°x25° no optic

CW NW WW R G RB A C

L

DD

W

L

Component Lamp Cat. No. Input Poweroption power consumption

Thermagon PCB 1 x K2 FS1C-20-PCB1K2 350 to 700mA 1.3 to 2.6WFS1 Non optic heat sink n/a LNK-HS n/a n/aFS1 Optic heat sink n/a LNK-HS1 n/a n/aSingle colour leads100mm starter lead n/a STR-100-1 n/a n/a200mm starter lead n/a STR-200-1 n/a n/a300mm starter lead n/a STR-300-1 n/a n/a100mm interconnecting lead n/a INT-100-1 n/a n/a200mm interconnecting lead n/a INT-200-1 n/a n/a300mm interconnecting lead n/a INT-300-1 n/a n/aPCB termination link n/a BDTM-1 n/a n/a

Option L W D

No Optic1 x K2 60 16 113 x K2 76 25 11Optic1 x K2 76 25 203 x K2 110 25 20

Non opticOptic

Page 4: FLEXIBLE SYSTEMS - news.voltilink.co.uk · The FS2 is a modular single colour and full colour change LED system which enables OEMs to easily construct bespoke schemes by selecting

The FS2 is a modular single colour and full

colour change LED system which enables

OEMs to easily construct bespoke

schemes by selecting from the listed

components.

By positioning the individual LED’s close to

each other, an intense colour mixing effect

is produced, ideal for wall wash detailing

and feature lighting.

The components are PCB’s which include

the 3xK2 LED’s in the chosen colour and

optic, with wiring connectors and VHB tape

on the rear, plus a range of link leads and

heat sink plates.

Materials

• Thermagon 1kA thermally conductive MCPCB• Heat sink mounting plate: Aluminium

Installation

• Suitable for interior applications• Surface mount with Plug & Socket connection• 100mm, 200mm or 300mm leads as std

(Other lengths by special request)• Refer to P58-59 for suitable driver module

Dimensions (mm)

FS2 COMPONENTS IP20

FLE

XIB

LE S

YS

TE

MS

25

Lamp Options

• 3 x 1W Luxeon K2 LED

Beam Angles

Catalogue Numbers

Lamp Colours

5° 15° 25° 5°x25° no optic

CW NW WW R G RB A C RG B

Component Lamp Cat. No. Input Poweroption power consumption

Thermagon PCB 3 x K2 FS2C-20-PCB3K2 350 to 700mA 3.9 to 7.8WFS2 Non optic heat sink n/a LNK-HS1 n/a n/aFS2 Optic heat sink n/a LNK-HS2 n/a n/aSingle colour leads100mm starter lead n/a STR-100-1 n/a n/a200mm starter lead n/a STR-200-1 n/a n/a300mm starter lead n/a STR-300-1 n/a n/a100mm interconnecting lead n/a INT-100-1 n/a n/a200mm interconnecting lead n/a INT-200-1 n/a n/a300mm interconnecting lead n/a INT-300-1 n/a n/aPCB termination link n/a BDTM-1 n/a n/aColour change leads100mm starter lead n/a STR-100-3 n/a n/a200mm starter lead n/a STR-200-3 n/a n/a300mm starter lead n/a STR-300-3 n/a n/a100mm interconnecting lead n/a INT-100-3 n/a n/a200mm interconnecting lead n/a INT-200-3 n/a n/a300mm interconnecting lead n/a INT-300-3 n/a n/aPCB termination link n/a BDTM-3 n/a n/aRGB RJ45 starter lead n/a STR-RJ-2000-3 n/a n/a

For FS2 (3 x K2) dimensions refer to page 24

Page 5: FLEXIBLE SYSTEMS - news.voltilink.co.uk · The FS2 is a modular single colour and full colour change LED system which enables OEMs to easily construct bespoke schemes by selecting

Materials

• Flexible circuit board

Installation

• IP20 version suitable for interior applications• IP67 version suitable for exterior applications

supplied in flexible polycarbonate sleeve &c/w mounting clipsSurface mount with self adhesive backingCut points with solder connection pointsevery 50mm

• IP20 versions available in 1m increments upto 6m for single colour, & up to 3m for RGB colour change

• IP67 versions available in up to 6m for single colour & up to 3m for RGB colour change

• Refer to P58-59 for suitable driver module

Dimensions (mm)

Lamp Colours

Lamp Options

• 60 x SMD LED/m (single colour)• 66 x RGB trinity SMD LED/m (colour change)

Beam Angles

The FS3 LED product comprises individual

surface mounted high output LEDs every

20mm. Supplied by the metre, it is

available in a wide range of single colours

as well as RGB colour change. A cut point

is provided at intervals along the strip for

total versatility.

A foil backed flexible PCB dissipates the

heat from the LED’s, thus improving LED

life and colour stability.

The FS3 is supplied complete with a self

adhesive backing.

FS3 IP20 IP67FL

EX

IBLE

SY

ST

EM

S

26

no optic

CW WW R G RB A RG B

Length

50

211.5

Length

4.513.5

IP20 version

IP67 version

Page 6: FLEXIBLE SYSTEMS - news.voltilink.co.uk · The FS2 is a modular single colour and full colour change LED system which enables OEMs to easily construct bespoke schemes by selecting

FS3

FLE

XIB

LE S

YS

TE

MS

27

Catalogue Numbers

Lamp Cat. No. Length Input Power option (m) power consumption

IP20 Single Colour60xSMD/m FS3-20-60SMD 1 12V DC 4.8W/m60xSMD/m FS3-20-120SMD 2 12V DC 4.8W/m60xSMD/m FS3-20-180SMD 3 12V DC 4.8W/m60xSMD/m FS3-20-240SMD 4 12V DC 4.8W/m60xSMD/m FS3-20-300SMD 5 12V DC 4.8W/m60xSMD/m FS3-20-360SMD 6 12V DC 4.8W/mIP20 RGB Colour Change66xSMD/m FS3-20-66SMD 1 24V DC 15.84W/m66xSMD/m FS3-20-132SMD 2 24V DC 15.84W/m66xSMD/m FS3-20-188SMD 3 24V DC 15.84W/mIP67 Single Colour60xSMD/m FS3-67-60SMD 1 12V DC 4.8W/m60xSMD/m FS3-67-120SMD 2 12V DC 4.8W/m60xSMD/m FS3-67-180SMD 3 12V DC 4.8W/m60xSMD/m FS3-67-240SMD 4 12V DC 4.8W/m60xSMD/m FS3-67-300SMD 5 12V DC 4.8W/m60xSMD/m FS3-67-360SMD 6 12V DC 4.8W/mIP67 RGB Colour Change66xSMD/m FS3-67-66SMD 1 24V DC 15.84W/m66xSMD/m FS3-67-132SMD 2 24V DC 15.84W/m66xSMD/m FS3-67-188SMD 3 24V DC 15.84W/m

Page 7: FLEXIBLE SYSTEMS - news.voltilink.co.uk · The FS2 is a modular single colour and full colour change LED system which enables OEMs to easily construct bespoke schemes by selecting

Catalogue Numbers

The FS4 is a revolution in flexible lighting,

the result of many years of technical LED

research and development it is now used

on projects around the world. The FS4

offers the same intense light output and

uniform brightness as neon but with one

significant benefit in that it is ‘bendable’.

It is easily shaped and cut to length,

making installation simple and quick, and

the all important appearance shows no hot

spot. FS4 is ideal for signage and displays,

architectural features and edge illumination

e.g. stairs or ground marking.

FS4 IP44

Lamp Cat. No. Weight Input Power option (kg) power consumption

72SMD/m FS4-72SMD 0.55/m 24V DC or 240V AC 9.4W/m237SMD/m FS4-237SMD 0.7/m 24V DC or 240V AC 17W/m

FLE

XIB

LE S

YS

TE

MS

28

27

15

Materials

• Body: Encapsulated polycarbonate

Installation

• IP44 suitable for interior and exterior applications

• Secured with fixing clips or channel section available separately

• Cut points every 100mm• Available in 1m increments up to 48m:• Refer to P58-59 for suitable driver module

Dimensions (mm)

Lamp Colours

Lamp Options

• 72 x SMD LED/m (Single Colour)• 237 x SMD LED/m (Colour Change)

Beam Angles

no optic

CW WW R G RB A RG B

30

20

Single colour

RGB Colour change

Page 8: FLEXIBLE SYSTEMS - news.voltilink.co.uk · The FS2 is a modular single colour and full colour change LED system which enables OEMs to easily construct bespoke schemes by selecting

The FS5 is a modular LED system which

enables OEMs to easily construct and

control full colour change applications

using LED technology.

Supplied as a 2m length, the FS5 is

constructed with 20 pre-connected IP65

rated modules in total. (The 2m length

achieved with each of the 20 modules

installed at 100mm centres).

This product can be used for a wide range

of applications such as architectural detail

lighting and is ideal for applications where

curves and corners need to be negotiated

for continuous lighting.

Materials

• Body: Encapsulated polycarbonate

Installation

• IP65 suitable for interior and exterior applications

• Secured via the screw holes in the bodyof each module

• Refer to P58-59 for suitable driver module

Dimensions (mm)

Catalogue Numbers

FS5IP65

Lamp Cat. No. Weight Input Power option (kg) power consumption

15x5mm/module FS5-155mm 2.7/2m length 24V DC 0.96W/module

FLE

XIB

LE S

YS

TE

MS

29

Lamp Options

• 15 x 5mm High Output LED

Beam Angles

Lamp Colours

78

11

18

78

11

18

CW WWR

G B

no optic

Single colourRGB Colour change